Carl Stahl Evita Limited Quality Training Worldwide · afford to take. Wire ropes and lifting...

Carl Stahl Evita Limited

Quality TrainingWorldwide

Wire Rope

Fork Lift Trucks

Lifting Operations

Health and Safety

Mobile Access / IPAF

Working at Height

Confined Space / Welding

www.carlstahlevita.co.ukISO 9001:2000Cert No: FS 532683

Introducing Carl Stahl Evita Training

About Carl Stahl EvitaWe specialise in helping you to maintain a safe,legal and cost effective operational environmentthrough Consultancy and Essential Training. Ourrange of courses are grouped under six mainheadings, Wire Rope, Lifting Operations, Fork LiftTrucks, Health and Safety, Confined Spaces,Working at Height, Mobile Access and Welding.

Training packages are proven and accepted asindustry benchmarks throughout the world andcourses are delivered by consultants withextensive background, technical and ‘hands-on’knowledge that never fails to make coursematerial relevant and interesting to delegates.

LegalityWell trained, competent people are the foundationof any successful business, but for liftingoperations, an industry driven by rapid changes inthe legal framework, training is even moreimportant.

SafetyIn situations where human survival is at stake,acceptance of second best is a risk nobody canafford to take. Wire ropes and lifting equipmentoften quite literally provide a lifeline for industry inhostile and demanding conditions. Your operationalsafety depends not only on your equipment, butalso on the awareness, skill and performance of the people who manage and use it.

Cost BenefitSafe and competent operation of equipmentbrings direct bottom line benefits with reductionsin downtime, handling times and the avoidance ofdamage to jobs and equipment. Effective trainingalso increases motivation and commitment.

Our Training PromiseWe offer continued support to all newly traineddelegates via telephone, email, or online web sitesupport. If appropriate, one of our consultants will visit.

2 Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065

Our training facil

ities

are available for

hire. Please call

us for further de

tails.

Our Training CommitmentThe Carl Stahl Group is committed to helpingcustomers increase standards and safety. Atraining and conference centre is located at thegroups’ headquarters site in Süssen, Germanyand Carl Stahl Evita Limited provides aninternationally accredited portfolio of programmesat its new purpose developed building in the UK.

Built upon many years of experience, ourtechnical expertise is unrivalled anywhere in theworld. Our qualifications are exemplary, the groupis certified to the European Quality Standard ISO9001 and we are a member company of theLifting Equipment Engineers Association (LEEA).Presenters and Consultants are members ofprestigious national associations such as CIPD,IM, IQA, IOSH, IAM, and ISM, and are amongstthe most highly qualified and experienced in theworld. They include Chartered Engineers,Mechanical Engineers, Professional TrainingPractitioners and Technicians.

Codes of Practice All training is carried out in association with or inaccordance with relevant professional tradeassociations, approved training suppliers,standards bodies, and Codes of Practice such asISO, EN, BS, DIN, ASME, API, HSE, LEEA, IOSH, ITSSAR.

Training Facilities and Room Hire Our excellent facilities are also available for hire.We have extensive resources and equipmentavailable to support your training/conferenceneeds.

We also have a Training Warehouse facility,restroom and kitchen with telephone access.

Ample car parking is also available at the centre.

Introducing Carl Stahl Evita Training

3Email: [email protected] Web: www.carlstahlevita.co.uk

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.

Training for ManagersManagement of lifting operations is no easy taskwhatever the job. Wherever you are, we will bringyou up to date with all the changes in the legalframework, offer continued advice and supportand provide consultancy whenever it is needed.

Training for Competent and Appointed PersonsMany of our courses are aimed specifically atthose who are appointed to specific liftingoperational roles, especially in the oil, marine,steel and mining industries.

Training for Wire Rope and Lifting Gear SalesProduct knowledge is all important when it comesto sales. With so many different types of rope andlifting gear accessories available, how do you getahead of the competition?

We know the products, their strengths,characteristics and performance. We can help your sales teams sell the benefits of your products.

Training for Warehouse PersonnelWe offer training for warehouse operatives inhealth and safety, risk assessment, manual andmechanical handling. Fork lift truck training (ITSSAR) to HSE guidelines.

Training for those Working in Confined SpacesWhen working in confined spaces, knowledge ofsafe working practices and the correct use ofequipment is vital in order to avoid accidents.

On-site training, tailored to meet specificrequirements, is also an option.

Training for Engineers, Inspectors and ExaminersWe carry out training for insurance engineers,inspectors, and examiners and our wire rope andlifting gear examiners programmes areinternationally accepted as the standard.

Courses and Contents

4 Tel: 0845 0900 777 Fax: 0845 0900 778

Training for Operators, Usersand Maintenance PersonnelSafe use, operator and maintenance programmesfor most lifting applications, appliances and tasks.If we do not have a listed course for your specificneed then we will tailor one to suit.

Training for InstructorsOur associate consultants are leading experts inwire rope, lifting gear, lifting operations andtraining. We offer invaluable advice and continuedsupport to prospective trainers and coaches oflifting operations in all industries.

Training for WeldersWelding training is carried out by our associateswho have over 20 years experience. A uniquefriendly expert service based on quality andreliability is guaranteed. Optional certificate to anyNational or International standard.

Further InformationIf you would like any further information, pleasefeel free to contact us. You can also visit ourwebsite, where you can download comprehensivedetails for all of our training courses.

Carl Stahl Evita LimitedCarl Stahl HouseFarfield ParkManvers EstateRotherham, S63 5DB

Tel: 0845 0900 777 Fax: 0845 0900 778Int Tel: +44 (0) 1709 763051Int Fax: +44 (0) 1709 763065

Email: [email protected]: www.carlstahlevita.co.uk

Courses and Contents

Email: [email protected] Web: www.carlstahlevita.co.uk 5

ACCREDITED TRAINING COMPANY

Wire Rope

Health and Safety

Wire Rope Examiners

Wire Rope Appreciation

Wire Rope Product Safety, Handling and Installation

Lift Rope Examination

Vehicle Lift Wire Rope Examination

Wire Rope Socketing

IOSH Managing Safely

Manual Handling Instructor

Manual Handling

Train the Trainer

Abrasive Wheel Safety

Abrasive Wheel Instructor

Safe Use of Ladders

Asbestos Awareness

Safe Use and Care of PPE

Lifting Operations

Lifting Gear Examination

Lifting Operations Instructors

Management of Lifting Operations

Lifting and Slinging Safely

Safe Use of Magnetic Lifters

8-11

Course Name Page

20-22

12-17

18

Risk Assessment

Power Tool Awareness

LOLER & PUWER Regulations

Lorry Mounted Crane

Safe Operation of Overhead Travelling Crane

Appointed Persons (Foundation)

IPAF Demonstrator Training

IPAF (MEWPS) Operator Training 1 or 2 Categories

IPAF MEWPS for Managers

IPAF Push Around Verticle

PASMA Certified Access Tower

Fork Lift Truck Instructor

Fork Lift Truck Operator

Vehicle Banksman

Other Courses Available

Fork Lift

6-7Fork Lift Truck Instructor Development

IPAF (MEWPS) Safety Harness & Lanyard

Additional Health and Safety Courses

Mobile Access

19Managing Working at Height

Basic Working at Height

Competent Person Inspection of Height Safety Equipment

Rescue

Rooftop SafetyWorking at Heights

Welding and Confined Space Courses 23

Fork Lift Courses

6 Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065

Target GroupA ten-day course for candidates wishing toachieve National Instructor Licence status(ITSSAR). Delegates must be a registeredoperator with over 12 months active operatingexperience on the nominated truck type. Theoperator’s certificate must have been issued inthe previous 6 months. A 5 Day Re-Reg Course(CFL05a) is available for instructors who wish torenew their licence.

Course Content• Initial practical training and testing to

instructor standard

• Safety and accident prevention

• Principles of fork lift trucks

• Truck familiarisation

• Instructor’s role

• Principle and practice of instruction

• Training exercises

• Operator competence testing

• Practical assessments

• Examination assessment and registration fee

Achievement MeasurementOn successful completion of the course, theinstructor will be qualified to train fork lift truckoperators (using as a standard, the appropriateITSSAR course) organise and administer operatorcompetence tests and issue certificates on trucksfor which he/she holds the relevant operator’scertificate.

Target GroupThose who have been selected by employers toperform the duties of fork lift operator or thosewho may be required to do so during theperformance of their duties.

• Novices - 5 days, • Experienced - 3 days, • Refresher - 1 day.

AimTo train potential fork lift operators to recognisedstandards as approved by HSE.

Note:Conversion courses available:

• Counterbalance - Reach (2 days)• Reach - Counterbalance (1 day)

Training ObjectivesBy the end of the course operators will be able to:

• Carry out pre-shift checks

• Manoeuvre in open and confined spaces

• Carry out stacking and de-stacking at variousheights both laden and unladen

• Carry out care and maintenance of the battery(if applicable)

Achievement Measurement The course contains both written and practicalassessments. Written assessments may be doneorally.

Fork Lift Truck Instructor (CFL05)

Fork Lift Truck Operator (CL01/02/03)

Fork Lift Courses


Target GroupA five-day intensive on-site course for those whohave been selected by employers to carry outbasic fork lift truck operator training ‘in house’.

Aim and Objective To train fork lift operators in the necessary skills,knowledge and training techniques so that by theend of the course those successful will be able totrain other potential fork lift operators within theirown companies.

Additional InformationAll Fork Lift Truck Training Courses in the UKare carried out in accordance with theIndependent Training Standard Scheme andunder the guidelines of the Approved Code ofPractice and Guidance as published by theHealth and Safety Commission (HSC).

Instructor CoursesAll attendees of instructor courses must be ata suitable standard of proficiency in forklifttruck operation. If this is not the case,additional time will be required to bring themup to the standard.

A half day course for all identified personnel who are required to/and or are responsible forassisting in the manoeuvering andloading/unloading of vehicles.

We also provide a range of additional courses:

• Powered Pallet Trucks• Side Loader• VNA - Man Up• VNA - Man Down• Pivot Steer Bendi Truck• Multi Directional Combi Lift• Tow Tractors• Rough Terrain• Telehandler• MEWP

Vehicle Banksman (CLO11)Fork Lift Truck InstructorDevelopment (CFL04)

Additional Courses

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.

Target GroupAn internationally accredited and widelyacclaimed two and a half day course.

The course is aimed at those responsible forinspection and/or statutory examination of wirerope in service. Appointed Persons, CompetentPersons, Maintenance Engineers. EngineerSurveyors, Crane Maintenance Engineers andOperators etc.

A 1 Day Refresher Course (CWR01R) isavailable for those who have previouslyattended the 21/2 day course.

AimThe aim of the course is to provide selecteddelegates with the skills and knowledge needed toundertake wire rope inspections and examinationsaccording to relevant standards. (ISO, BS, API orASME). Additionally delegates will gain knowledge ofsafe use and handling of wire rope.

Training ObjectivesBy the end of this course delegates will be able to:

• Demonstrate knowledge of wire ropeterminology, constructions, characteristics, ropeperformance, safe use and handling, andapplications

• Get the best out of their products whilstmaintaining a safe working environment

• Carry out wire rope inspections and/or examinations

Course Content• Responsibilities and primary functions of a Rope

Inspector/Examiner

• Wire rope manufacturing

• Rope terminology

• Wire rope characteristics

• Rope terminations

• Rope deterioration

• Examination procedure

• Discard criteria

• Examination records and reports

Achievement MeasurementThe course includes a short written confirmationtest and a practical assessment leading tocertification on successful completion.

Wire Rope Courses

8 Tel: 0845 0900 777 Fax: 0845 0900 778

Wire Rope Examiners (CWR01)

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.

Target GroupWhatever your needs are, an overall appreciationof wire ropes in service for users, an appreciationof wire rope examination, or an overview of wirerope for sales personnel, this one-day coursecould be the solution for you.

Aim To provide appreciation and knowledge of safe use,handling and inspection of wire ropes in service.

Training ObjectiveBy the end of this course delegates will be able todemonstrate knowledge of relevant wire ropeterminology, constructions, characteristics andeffect on rope performance, inspection principles,and safe use and handling.

Seminar Content• Introduction to various wire ropes,

manufacturing, constructions and applications

• Rope terminology

• A practical assessment of steel wire ropesincluding an appreciation of rope strength,flexibility, fatigue, wear, abrasion, rotation andelongation

• Wire rope terminations

• Rope deterioration

• Overviews of wire rope inspection, examination,discard criteria, and problems resulting frommisuse and abuse

Achievement MeasurementThis one-day course includes a practicalassessment leading to certificate of attendanceon successful completion.

Wire Rope Courses


Wire Rope Appreciation (CWR02)

Wire Rope Courses

10 Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065

This one day course is designed to equippersonnel who are using or handling steel wire rope with the necessary knowledge to ensure that they adopt best working practices andensure that both they and their employer complywith current lifting legislation including Liftingoperations Lifting Equipment Regulations 1998.

This two day course is essential to anyone who isspecifically involved with the statutory or interimexamination of passenger lift ropes.

As well as providing information on wire ropesafety, handling and installation, the contentreflects the current standards andrecommendations specifically relating toexamination of lift ropes and involves both writtenand practical assessment.

This one day course is essential to anyoneinvolved in the statutory or interim examination ofwire ropes installed on vehicle lifts normallyoperating in a garage workshop environment.

The course provides information on typical wireropes used on vehicle lifts and clearly specifiesdiscard levels in line with current best practiceand prevailing standards.

Lift Rope Examination (CWR03)

Wire Rope Product Safety,Handling and Installation (CWR05)

Vehicle Lift Wire Rope Examination (CWR04)

Target GroupThis two-day LEEA Accredited Course is for thoseinvolved in the maintenance and socketing of wireropes. Necessary for wire rope maintenanceengineers.

Aim To provide delegates with a thorough grounding ofthe legal requirements and safe working practicespertaining to resin socketing of wire ropes and toteach them the practical skills involved.

Training ObjectivesBy the end of the course delegates will be able to:

• Recognise various socketing applications

• Select the tools and equipment required forsocketing

• Carry out preparation successfully

• Make suitable measurements

• Select a suitable socket for the job

• Mix resin

• Carry out resin socketing using approvedmethods and procedures

Course Content• Legal requirements

• Socketing applications

• Socketing methods and procedures, includingpreparation, measurements, serving etc

• Mixing and pouring of resin

• Socketing practices with ongoing assessment

Achievement MeasurementTrainers employ the practical methods ofInstruction, Explanation, Demonstration, Imitationand Practice (EDIP) with ongoing assessmentleading to certification on successful completion.

Wire Rope Courses


Wire Rope Socketing (CWR06)

Pocket Guide to

Wire Rope ExaminationEdition 2

www.carlstahlevita.co.uk

C

F

Handy pocket sized

books for sale!

Call us

for more details.

Target GroupUsers of lifting gear and those involved in theinspection or statutory examination of lifting gear inservice. An internationally recognised coursedesigned for those involved in the inspection orstatutory examination of lifting gear in service. Anessential course for Appointed Persons.

A 1 Day Refresher Course (CLO02R) is availablefor those who have previously attended the 2day course.

AimsThe aims of the course are to:

• Provide delegates with a thorough grounding ofthe law and standards pertaining to lifting gear

• To teach the statutory requirements for,inspection, rejection and reporting of lifting gearin service

• To provide some practical advice that will enablethose who attend to carry out lifting gearinspections confidently


• Carry out statutory ‘in service’ inspections andexaminations

• Demonstrate knowledge of terminology, law,standards, safe working practices, storage,marking and handling of lifting gear

• Offer sound advise to other users

• Ensure safety whilst working with lifting gear

Course Content• Definitions

• Law and standards

• Legal requirements

• Statutory certificates and reporting

• Principles for selection of lifting gear

• Marking, storage and handling

• Materials used

• Force influences

• Examination of lifting gear

• Practical examination of lifting gear

Achievement Measurement This two-day course is carried out in accordancewith the Code of Practice for the Safe Use of LiftingEquipment as published by LEEA, PUWER andLOLER. It includes short written confirmation testsand a practical lifting gear inspection assessmentleading to certification on successful completion.

Lifting Operations Courses

12 Tel: 0845 0900 777 Fax: 0845 0900 778

Lifting Gear Examination (CLO02)

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.



Target GroupAn intensive five-day course aimed at employeeswho have been identified and/or selected to carryout ‘in-house’ instruction of lifting operations.

AimThe aim of the course is to train experienced liftingoperatives to instruct other personnel in the safeuse of lifting equipment.

Training ObjectivesBy the end of this course delegates will be able to:

• Recognise the need for the requirements of safesystems of work

• Instruct operatives on their obligations withrespect to statutory requirements relating tolifting operations

• Instruct operatives on the safe use of liftingequipment

• Develop effective training programmes andschedules in lifting operations

• Measure levels of instruction, by continuousperformance review and assessments

General InformationA copy of the LEEA Code of Practice for the Safe Use of Lifting Equipment is issued to each candidate at the start of this open course.

Course Content• Legislation, an update on all legislation

including, Health and Safety at Work Act,PUWER and LOLER

• Introduction to the LEEA Code of Practice forthe Safe Use of Lifting Equipment

• The principle components of the systemsapproach to training

• Method of Instructional Techniques (MOIT)

• Delegate teaching practices, designed topractice and assess delegate’s knowledge oflifting operations and the ability to instruct

• Final assessment

Achievement MeasurementDelegate’s progress is monitored by ongoingassessment of up to 3 individual teachingpractices, the final of which is used to measureoverall performance. A report on each candidateis prepared and certificates are awarded to thosethat are successful.

Lifting Operations Instructors (CLO03)

Target GroupThose responsible for lifting and slingingoperations and management ofBanksmen/Slingers, Responsible Persons,Competent Persons, Service Engineers,Technicians, Supervisors, Managers, SafetyOfficers etc.

AimThe aim of the course is to provide selecteddelegates with a thorough grounding of lifting andslinging operations, including employer/employeeresponsibilities statutory requirements, recordsand ‘in depth’ safe working practices.


• Demonstrate knowledge of the legalrequirements, obligations and responsibilities oflifting operations

• Outline the principles for the selection of liftingequipment

• Demonstrate knowledge of force influences forvarious sling configurations

• Demonstrate knowledge of weight estimation

• Select appropriate lifting equipment

• Carry out identification and pre-use inspection

• Use appropriate hand signals

Course Content• Definitions and terminology

• The law, standards and legal requirements

• Principles for the selection of lifting equipment

• Slinging methods

• Force influences

• Weight estimation

• Slinging accessories

• Plan your lift (practical exercise)

• Practical considerations. Questions to ask, ‘Do’sand Don’ts’, crane signals and PersonalProtective Equipment (PPE)

Achievement MeasurementThis two-day course is carried out in accordancewith the Code of Practice for the Safe Use ofLifting Equipment as published by LEEA, PUWERand LOLER and includes written assessmentsleading to certification on successful completion.


14 Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065

Management of Lifting Operations (CLO05)



Target GroupEither a 1 day bespoke course to the customers’requirements or a 2 day “complete” LEEAaccredited course aimed at those who have, orare required to have ‘hands on’ knowledge and/orresponsibilities involving use of lifting equipmentused within their operational environment.

AimThe aim of the course is to provide selecteddelegates with basic underpinning knowledge oflifting and slinging enabling them to carry outlifting operations in accordance with statutoryrequirements and without risk to health.

Training ObjectivesBy the end of this course trained operatives will beable to carry out the duties of a rigger/slinger/banksman safely.

Course Content• Definitions and terminology • The law and legal requirements• Force Influences and uniform load method• PPE• Choosing the right sling for the job• Pre-use Inspections• How much does it weigh?• Slinging accessories• Crane signals• Practical assessments

Achievement MeasurementIncludes practical lifting operationassessments leading to certification on successfulcompletion.

Designed for users of permanent magnetic liftersand those carrying out “in service” inspection ofpermanent magnetic lifters. It is also suitable forthose who are involved with, or give advice tousers of permanent magnetic lifting equipment.

This one-day course is carried out in accordancewith the code of practice for the safe use of liftingequiment (section 25) as published by LEEA. Itincludes a multiple choice confirmation test and apractical lifting assessment leading to certificationon successful completion.

A half-day seminar for all personnel involved in ormanaging Lifting Equipment and/or LiftingOperations. The aim of this seminar is to inform allattendees on current regulations pertaining tolifting operations, underlining employer andemployee responsibilities.

This three-day course is for candidates wishing toachieve a nationally recognised operatorqualification enabling them to operate a LorryMounted Crane during their normal day to dayduties. On successful completion of the coursecandidates will receive an ITSSAR operatorscertificate and plastic photo ID card.

Course Content• The Need to Train, Health & Safety Presentation

Video, Introduction to the machine, Basic lifting /Operating, Negotiating a simple course, Pre-UseChecks, Excavating at various Depths,Advanced Exercise, Theory Test, Practical Test

Lorry Mounted Crane (CLO07)

LOLER & PUWER Regulations (CLO04)

Safe use of MagneticLifters (CLO12)

Lifting and Slinging Safely (CLO01)

2 DayLEEA

AccreditedCourse

Available

Target GroupThose identified to use, or responsible for otherswho use overhead travelling cranes with cabmounted, pendant or radio controls. Delegatesmust be over the age of 17, be physically fit, havegood eyesight, hearing ability and be able tojudge distances.

Aim & DurationThe aim of this course is to train selecteddelegates in the safe operation and effective useof overhead travelling cranes in their workplace.Two separate courses are available to meet theneeds of those with pendant or cab controls. Theduration of each programme is dependent uponexperience, 1 day for experienced operatives, 2days for those with little or no experience.

ObjectivesBy the end of the course delegates will be able to:

• Operate the crane safely in accordance withmanufacturers handbook and accepted codesof practice

• Demonstrate an understanding of the controlsof the particular model used during the training

• Demonstrate knowledge of the proper use oflifting tackle

• Estimate the weight of loads

• Use appropriate communications

Course Content• Health & Safety at Work Regulations

• Lifting gear regulations

• Lifting gear pre-use inspections

• Load handling

• Stacking and de-stacking

• Correct slinging

• Handling methods

• Capacities and effects of sling angles

• Weight assessment and capacities

• Signalling

Achievement MeasurementThe course includes assessments and successfulcompletion leads to certification.

Safe Operation of OverheadTravelling Crane (CLO08)


16 Tel: 0845 0900 777 Fax: 0845 0900 778

Target GroupA four-day programme aimed at those with aworking knowledge of cranes and liftingoperations and selected for duties as anAppointed Person within their own organisation. 1day refresher course available for those who havealready completed the four-day course.

5 day CPCS Accredited Course available.Candidates required to first pass theConstructions Skills Health & Safety test beforecommencement of this 5 day course.

AimThe aim of this course is to train the selecteddelegate in the duties of an ‘Appointed Person’.The course also provides a good foundation fortrainees who wish to progress further into theplanning of larger multi-lift operations.

ObjectivesAt the end of this course, trainees will be able todemonstrate sufficient knowledge and practicalability to carry out the duties of the ‘AppointedPerson’ and will be able to successfully plan andexecute complex lifting operations.

Course Content• Duties & responsibilities of appointed person &

other site personnel

• Requirements of legislation, regulations, &codes of practice that relate to all types of liftingduties inc. basic, standard & complex (asdefined by BS7121)

• Maintenance, inspection, thorough examination& testing requirements for lifting equipment &accessories.

• Different types of lifting accessories & typical applications

• Types of cranes, their capabilities & limitationsfor given lifting operations, from givenmanufacturers specification sheets

• Different types of lifting equipment, their safeworking configurations, & using the liftingequipment’s duties charts & specifications.

• Crane stability amd safety devices

• Completion of written risk assessments, methodstatements & lifting plans using giveninformation to construct a safe system of work

Achievement MeasurementSuccessful completion of two written test papersand final practical exercise leads to certification.



Appointed Persons (Foundation) (CLO10)

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.

Mobile Access / IPAF

18 Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065

A one day course based on IPAF’s (InternationalPowered Access Federation) Operator’s SafetyGuide and all relevant national and internationalsafety standards, this course covers MobileElevating Work Platforms (MEWP’s) such asScissor Lifts, Self Propelled Booms, TrailerMounted Booms, Personnel Lifts, Van and TruckMounted Booms and some special categories.

Upon successful completion candidates areissued with an IPAF certificate and a PoweredAccess Licence (PAL Card).

A one day course based on IPAF’s (InternationalPowered Access Federation) Operator’s SafetyGuide and all relevant national and internationalsafety standards, this course covers MobileElevating Work Platforms (ME WP’s) such asScissor Lifts, Self Propelled Booms, TrailerMounted Booms, Personnel Lifts, Van and TruckMounted Booms and some special categories.

Upon successful completion candidates areissued with an IPAF certificate.

This one day course is designed to instructsupervisors/managers what is required to preparefor and safely co-ordinate various types of MobileElevating Work Platforms (MEWP’s) within theircontrol.


This half day course will enable trainees tobecome competent to operate various types ofPush Around Vertical (PAV) platforms safely and inthe correct manner. Learning skills such as pre-inspection and the correct operation of equipmentwill help avoid potential accidents.

Upon successful completion candidates areissued with an IPAF certificate and a PoweredAccess Licence (PAL Card).

This half day course is intended for delegates whouse safety harnesses and lanyards in the courseof their work. Upon completion of this coursecandidates will achieve an understanding of therequirements under the Working at Heightregulations 2005, including the safe selection, useand inspection of harnesses and lanyards.


A one day course. Current legislation requires thatyou (and your Supervisor/Manager) are trained inthe safe use of work equipment, which includesMobile Access Towers. The official PASMA(Prefabricated Access Suppliers’ andManufacturers’ Association) certification satisfi esthe Work at Height Regulations 2005 and TheProvision and Use of Work Equipment Regulations1998 (PUWER). Upon successful completioncandidates are issued with a PASMA identity cardand certificate. This is widely accepted andrecognised by the Health and Safety Executive(HSE) and is valid for 5 years.

IPAF (MEWPS) Operator Training 1 or 2 Categories (AP01)

IPAF Demonstrator Training (AP02)

IPAF MEWPS for Managers (AP03)

IPAF Push Around Verticle (AP04)

IPAF (MEWPS) Safety Harness & Lanyard (AP05)

PASMA Certified Access Tower (AP06)

Working at Heights


The aim of this half day course is to ensure thatpersonnel are aware of the legal and best ofpractice requirements when using fall protectionequipment and are aware of their responsibilities.

On successful completion of the course, alldelegates will be issued with a certificate ofattendance.

The aim of this one day course is to ensure thatpersonnel are aware of the legal and best practicerequirements when using fall protectionequipment, and are aware of their responsibilities.

On successful completion of the course /assessment, all trainees will be issued with acertificate.

The aim of this one day course is to ensuretrainees are aware of the legal and best practicerequirements when using and inspecting Fallprotection equipment and are aware of theirresponsibilities under UK Legislation.


The aim of this one day course is to ensure thatpersonnel are aware of the legal and best practicerequirements when using rescue & fall protectionequipment, and are aware of their responsibilities.


The aim of this one day course is to ensure thatpersonnel are aware of the legal and best practicerequirements when using fall protectionequipment, and are aware of their responsibilities.


Managing Working at Height (HAR02)

Basic Working at Height (HAR01)

Competent Person Inspection of Height Safety Equipment (HAR03)

Rescue (HAR04)

Rooftop Safety (HAR05)

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.

Target GroupThis four-day course is designed for thoserequired to manage safely and effectively incompliance with both their organisation’s policyand best practice in health and safety.

The specific target group are people in anorganisation who have to manage risk andresources.

AimTo provide delegates with the competencies thatwill enable them to review their own departmentalsystems for safety, introduce new controls andimplement changes as appropriate.

Training ObjectivesOn successful completion delegates will be able to:

• Explain ‘working safely’ and the componentparts of a recognised safety managementsystem

• Compare safety management systems withother management systems and describe howto integrate systems successfully

• Identify the data and techniques required toproduce an adequate record of an incident and demonstrate the procedure for an accident investigation, recognising the humanfactors involved

• Describe statutory requirements for reportingand procedures for checking for non-reporting,and methods of basic trend and epidemiologicalanalysis for reactive monitoring techniques

• Define hazards and risks and describe the legalrequirements for risk assessment

• Demonstrate a practical understanding of aquantitative risk technique and the data requiredfor records

• Identify workplace precaution hierarchies andthe criteria for types of workplace precautionsand controls

• Prepare and use active monitoring checklistsand implement schedules for active monitoring,recording results and analysing records

• Explain the purposes and techniques of a healthand safety audit

• Outline the main provisions of the Health andSafety legislation

• Describe procedures and techniques used inmanagement reviews

• Outline relevant health and safety legislation,codes of practice, guidance notes andinformation sources and distinguish specifichazards both generally and from anorganisational perspective

Achievement MeasurementIn order for an IOSH Managing Safely certificate tobe issued, the delegate must successfullycomplete the Institution’s approved assessmentprocedure included in this course.

Other InformationManaging Safely comprises seven core modulesand one organisation-specific one requiring a totaldirect input period of at least 24 hours plusassessment time. Our delivery timetable is basedon a 4-day block programme including theexamination/assessment period.

Health and Safety Courses

20 Tel: 0845 0900 777 Fax: 0845 0900 778

IOSH Managing Safely (NHS03)



This two-day course is aimed at all employeeswho have been identified and/or selected to carryout ‘in-house’ instruction on Manual Handling.

A half day course to enable candidates to identifyproblems associated with manual handling in thework place and also to develop solutions to thoseproblems.

A five day course aimed at employees who havebeen identified and or selected to carry out ‘inhouse instruction.

Designed for managers, supervisors and all thosewho have a responsibility to conduct riskassessments. Delegates will become familiar withlegal requirements, principles of risk assessmentand the methods of conducting them in practicalsituations.

Risk Assessment (NHS10)

Manual Handling Instructor (NHS13)

Manual Handling (NHS12)

Train the Trainer (NHS22)

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.


22 Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065

This half day course has been designed to givemanagers and users of power tools an awarenessof their legal requirements relating to the safe useof their hand held power equipment and to ensurethat they adopt the correct safe working practicesin accordance with the Provision & User of WorkEquipment Regulations 1998.

This half day course will enable delegates tounderstand the requirements of abrasive wheel safetyand associated legislation (including PUWER). Also,to show an understanding of the practical aspects ofmounting and safe use of abrasive wheels.

This two day course is for those who haveresponsibility for training other employees on thesafe use and mounting of abrasive wheels.

On average there are 1200 serious injuries and 14deaths reported to the HSE each year involvingWorking at Heights, a third of these involveladders and step ladders. The aim of the course isto train selected delegates in the correct use andapplication of ladders & step ladders, pre-useinspection and reports and records that need tobe kept in accordance with the law.

This half day asbestos awareness course is aimedat all personnel who may come into contact withasbestos whilst carrying out refurbishment,demolition of industrial or domestic premises andgeneral building and maintenance work. The aimof the course is to train individuals to work safelyand within the law.

This half day course provides essentialinformation regarding the correct use andmaintenance of PPE and ensures that youremployees comply with the requirements of thePersonal Protective Equipment at WorkRegulations 1992

We also provide a range of additional courses:• CIEH Level 2 Health & Safety (SOU09)

• CIEH Level 3 Fire Safety Risk Assessment (SOU02)

• CIEH Level 2 COSHH (SOU10)

• CIEH Level 2 Fire Safety (SOU03)

• IOSH Working Safely (SOU08)

• NEBOSH National General Certificate inOccupational Health & Safety (SOU01)

• QA Level 2 Award in Emergency First Aid (SOU07)

• QA Level 3 Award in First Aid at Work (SOU04)

• QA Level 3 First Aid Requalification (SOU05)

• First Aid at Work Annual Refresher (SOU06)

Asbestos Awareness (NHS02)

Safe Use of Ladders (NHS19)

Abrasive Wheel Instructor (NHS20)

Abrasive Wheel Safety (NHS15)

Power Tool Awareness (NHS04)

Additional Courses

Safe Use and Care of PPE (NHS21)

All courses can b

e held

on-site subject to

available facilitie

s.

Contact us for a

quote.

Welding & Confined Space Courses


We provide the following welding courses:

• Metal Inert/Active Gas Welding• Oxy-Fuel Gas Safety and Cutting • Manual Metal Arc Welding• Tungsten Inert Gas Welding

We provide the following confined space courses:

• Confined Space Awareness • Confined Space Entry - Escape Sets• Confined Space Entry - Escape Sets,

Full BA and Rescue • Level 2 Qualification in Working in Medium Risk

Confined Spaces• Level 2 Qualification in Working in High Risk

Confined Spaces• Level 3 Qualification in Emergency Rescue and

Recover of Casualties from Confined Spaces

Welding Courses Confined Space Courses

Pocket Guide to

Wire Rope ExaminationEdition 2


Pocket Guide toLifting OperationsEdition 11


Only

£6.50each

Carl Stahl Evita LimitedCarl Stahl House, Farfield Park, Manvers EstateRotherham, S63 5DB, England

Tel: 0845 0900 777 Fax: 0845 0900 778Int Tel: +44 (0)1709 763051 Int Fax: +44 (0)1709 763065Email: [email protected] Web: www.carlstahlevita.co.uk

Don’t take our word for it…

‘The training facility at Carl Stahl Evita Ltd was excellent!The course was tailored to our needs and delivered byfriendly, professional instructors who were clearlyknowledgeable. An all round great learning experience!’Allianz Engineering – United Kingdom.

‘Thanks for your help in arranging this course. It was justwhat we needed and the lads that attended could notpraise Geoff’s delivery enough. They really enjoyed thecourse and found it very informative and believe it willdefinately make the way they perform their roles safer’HSE Champion, Yamazaki Mazak UK Ltd

‘… with reference to the Evita Wire Rope Examiners andLifting Gear Inspection Course – in Halifax, Nova Scotia,we would like to thank you for your choice ofinstructors…they presented the programme in a mostprofessional and informative manner.’Operations Manager – CTS Container and TrailerServices Ltd., Canada

‘What a great course. Having used lifting equipment &accessories for many years, I never understood theselection of what and how to use. I now feel confident inboth selection and use. The course was informative andpresented in a manner that fully explained all aspects. The information given will now allow me to carry on mywork correctly, giving myself and my staff a much greaterlevel of safety’Bebbington and Wilson Limited, UK

‘… our member was very impressed with the presentationof the course and benefited considerably from theknowledge received… I shall be most pleased to pass onthe Evita name.’Lifting Equipment Engineers Association – UK

‘May I take this opportunity on the way your instructorsconducted their training lessons. They were veryprofessional and their delivery method made it easier forthe trainee to understand the subject matter and that is anasset to your company. You make your customers feelvery welcome and from what I have seen and experiencedFendercare will be doing more training at Carl Stahl Evita.’Fendercare Marine Solutions – United Kingdom

‘Just a note to say thanks for an enjoyable and informativecourse over the last couple of days. It just proved to meonce again that no matter how long a person has beendoing a job or how experienced they may think they are atthat job there will always be something new to learn andevery day at that!!.’Weldex (International) Offshore Ltd

‘We were impressed by the flexible approach adopted byEvita to provide a course tailored to suit the needs of ourEngineer Surveyors who all benefited greatly from thepresenters ‘in-depth’ knowledge and experience.’Royal and SunAlliance Engineering Practice

Worldwide Coverage: We have deliveredsuccessful training in Morocco, Iceland, Ireland,Columbia, Canada, South America, Norway, France,Dubai, Singapore and of course all over the UK.

ISO 9001:2000Cert No: FS 532683

Carl Stahl Evita Limited Quality Training Worldwide · afford to take. Wire ropes and lifting...

Documents

Transcript of Carl Stahl Evita Limited Quality Training Worldwide · afford to take. Wire ropes and lifting...