iPads in the Classroom Presented by Jason Buck, Matt Spears and Matt Tobin
Car Wash Project by Ryan Jason and Matt
description
Transcript of Car Wash Project by Ryan Jason and Matt
![Page 1: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/1.jpg)
CarWash Inc.
Ryan VuMatthew Ethredge
Jason Holland
![Page 2: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/2.jpg)
1.Conveyor Belt Starts
2.Wet Down Begins/Stops
3.Soap Begins/Stops
4.Wash Begins/Stops
5.Rinse Begins/Stops
6.Dry Begins/Stops
7.Conveyor Belt Stops
Car Wash Cycle
![Page 3: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/3.jpg)
Start Button – Engages the conveyor belt.
Emergency Stop Button – In case of an
emergency it will shuts down all operations.
Reset Button – It resets the counters used
in the car wash for the next car.
Input Devices
![Page 4: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/4.jpg)
The conveyor belt is used to drag the car
when in neutral using a constant speed
motor.
Conveyor belt
![Page 5: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/5.jpg)
The wet down is activated for 20 seconds
after the start button is activated.
It sprays down the car to soak any mud to
make it loose.
Wet down cycle
![Page 6: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/6.jpg)
After the wet down process complete the soap
process activates for 45.
It completely coats the car in soap.
Soap down cycle
![Page 7: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/7.jpg)
After the soap process is complete the wash
process activates for 45 second.
High pressure wash heads are used.
All dirt and debris is removed.
Wash cycle
![Page 8: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/8.jpg)
After the wash process is complete the rinse process activates for 45 seconds.
low pressure nozzles are used to rinse the exterior free of all soap.
Rinse cycle
![Page 9: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/9.jpg)
After the rinse cycle is complete the dryer process activates for 45 seconds.
High powered blowers are used to completely dry the exterior of the car.
Dryer Cycle
![Page 10: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/10.jpg)
Ladder diagram
![Page 11: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/11.jpg)
Ladder diagram
![Page 12: Car Wash Project by Ryan Jason and Matt](https://reader036.fdocuments.net/reader036/viewer/2022062615/5485b2f95806b5a4588b47d2/html5/thumbnails/12.jpg)
Thank you!