Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für...
Transcript of Car Refinishing Manual VOC · 2020. 4. 14. · Car Refinishing Manual VOC Reparaturleitfaden für...
Car Refinishing Manual VOC
Reparaturleitfaden für PKW-Lackierungen
Manuale per la riverniciatura di autovetture
Reparationshandbok för lackering av personbilar
Håndbok for reparasjonslakkering av personbiler
Manual para la reparación del pintado de turismos
Manual de repintura para automóveis de passageiros
Reparatierichtlijnen laksystemen voor personenwagens
Guide pour la réparation des peintures des voitures particulières
Technical InformationContents VOC
03/2020
Contents
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
A General Information Edition
Notes on the manual A 1 10/2011
Use of matrices A 2 10/2011
Paint shop operations A 3 10/2011
B Matrices Edition
Pre-treatment of substrates and old paintwork B 1 11/2011
Metallic substrates - body fillers B 2 03/2014
Metallic substrates – undercoats B 3 01/2018
Coating of plastics - undercoats B 4 07/2016
Primer / primer filler / surfacer combinations B 5 04/2014
Sanding of undercoats B 6 07/2016
Primer filler / surfacer / topcoat combinations B 7 11/2017
Hardeners / activators for undercoats B 8 04/2014
Hardeners for topcoats / clears B 9 11/2017
C Glasurit® RATIO Systems Edition
Glasurit® RATIO Aqua RATIO Aqua 01/2015
Glasurit® RATIO HS RATIO HS 11/2017
D Refinishing Systems Edition
Spray Filler System 1006-26 Glasurit® UP-Spray Fillergrey
S 1 03/2018
Painting of Plastics on Cars S 3 10/2011
Painting of Plastics on Cars S 3a 08/2019
Painting of Factory-Primed Plastic Parts S 3b 12/2013
Painting of Plastics on Cars S 3c 11/2018
Economical Repair System S 4 04/2014
Repair System for new e-coated parts S 4a 10/2011
Blend-in Refinishing System 22 Line Glasurit® HS 2KTopcoat VOC
S 7a 06/2018
Blend-in Refinishing System 22 Line Glasurit® HS 2KTopcoat VOC MC600
S 7b 06/2018
Technical InformationContents VOC
03/2020
Contents
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Blending in on the panel being repaired with Glasurit®90 Line Basecoat
S 9 01/2012
Blending in on the adjacent panel with Glasurit® 90 LineBasecoat
S 9.1 11/2016
Blend-in Repair System 90 Line Glasurit® Pearl EffectBasecoat
S 9.2 01/2016
Glasurit® - Spot Repair Process S 9.5 01/2016
Blending in on the adjacent panel with Glasurit® 90 Linetri-coat colors (translucent step 2)
S 9.6 05/2019
Refinishing with Low-Solvent Products Glasurit® VOCRefinishing Process
S 10 11/2017
Glasurit® Mat Clear System S 12 01/2015
Glasurit® Mat Clear System / modified S 12a 11/2018
Glasurit® PRO Active repair process S 13 11/2017
Paint system with 1K UV primer filler for repairs onplastic parts
S 15 09/2019
Paint system with 1K UV primer filler for repairs onmetal parts
S 15a 09/2019
E Glasurit® RATIO Color Edition
Glasurit® Paint Mixing System E 1 10/2011
Glasurit® RATIO Color System E 2 10/2011
Tips for colour matching E 4 10/2011
F Important Information / Tables Edition
Product list F 1 11/2017
Temperature table F 2 11/2017
Survey of processing pictographs F 3 11/2013
Infrared drying F 4 11/2017
Advice on the use of HVLP sprayguns F 5 10/2011
G Contents Product Information Edition
G / BF Body Fillers Edition
G / P Primers Edition
G / PF Primer Fillers Edition
Technical InformationContents VOC
03/2020
Contents
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
G / F Fillers Edition
G / T Topcoats Edition
G / C Clears Edition
G / X Miscellaneous Edition
G / Z Additives Edition
Technical InformationProducts VOC
03/2020
ContentsProduct Information
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Body Fillers G / BF Edition
Glasurit® Multi Purpose Body Filler 839-20/20K 05/2014
Glasurit® Fine Body Filler 839-25 10/2011
Glasurit® Soft-Body Filler 839-55 03/2014
Glasurit® Universal Body Filler 839-70/70K 10/2011
Glasurit® Multi Brushing Body Filler 839-85 07/2015
Glasurit® Body Filler 839-88 05/2014
Glasurit® Plastic Body Filler 839-90 10/2011
Glasurit® UV Body Filler 839-171 11/2019
Glasurit® Glass fibre body filler 901-21 10/2011
Glasurit® UP-Spray Filler grey 1006-26 08/2016
Primers G / P Edition
Glasurit® 1K Anti-corrosive Primer 183-30 08/2019
Glasurit® Etch Primer Filler 283-150 12/2016
Glasurit® 2K SF Primer 285-26 02/2016
Glasurit® 1K Plastic Adhesion Primer 934-10 08/2019
Primer Fillers G / PF Edition
Glasurit® UV Primer filler, light grey 151-130 09/2019
Glasurit® UV Primer filler grey 151-170 08/2018
Glasurit® UV Primer filler grey aerosol can 151-170 AE 08/2019
Glasurit® UV Primer filler, dark grey 151-190 09/2019
Glasurit® 1K Primer Filler 176-72 08/2016
Glasurit® 1K Express Primer Filler light grey 183-70 08/2019
Glasurit® 1K Express Primer Filler dark grey 183-90 08/2019
Glasurit® Etch Primer Filler 283-150 12/2016
Glasurit® Primer Filler Pro, white 285-230 04/2019
Glasurit® Primer Filler Pro, grey 285-270 04/2019
Glasurit® Primer Filler Pro, black 285-290 04/2019
Glasurit® HS Primer Filler, grey 285-505 11/2018
Glasurit® HS Primer Filler, black 285-555 11/2018
Glasurit® HS Primer Filler, white 285-655 11/2018
Glasurit® Primer Filler 285-700 02/2016
Glasurit® Primer Filler, white 285-730 02/2016
Glasurit® Primer Filler, black 285-790 02/2016
Glasurit® Epoxy Primer Filler grey 801-72 02/2016
Glasurit® 2K Plastic Primer Filler 934-70 02/2016
Technical InformationProducts VOC
03/2020
ContentsProduct Information
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Fillers G / F Edition
Glasurit® 1K Filler 185-66 08/2019
Glasurit® HS Transparent Sealer 285-0 02/2016
Glasurit® HS VOC Non-Sanding Filler, light grey 285-31 02/2016
Glasurit® HS VOC Non-Sanding Filler, white 285-38 02/2016
Glasurit® HS VOC Non-Sanding Filler, black 285-49 02/2016
Glasurit® HS VOC Tintable Filler, transparent 285-95 02/2016
Glasurit® Filler VOC grey 285-888 01/2015
Topcoats G / T Edition
22 Line Glasurit® HS 2K Topcoat VOC 22- VOC 04/2016
22 Line Glasurit® HS 2K Topcoat VOC MC600 22- VOC MC600 05/2018
Glasurit® 22 Line HS 2K Topcoat, mat, Glasurit® 22 Line HS 2KTopcoat 22-1250-M
22- matt 11/2017
90 Line Glasurit® Basecoat 90- 05/2017
Glasurit® Basecoat 90- Limited Edition 90- Magic Collection 90- 10/2011
90 Line Glasurit® Basecoat mixed tinters 90- Mixed tinters 10/2019
90 Line Glasurit® Basecoat factory pack 90- Factory- pack 10/2019
Blend-in Technique with Glasurit® 90-905 Alusilber 90-905 03/2013
Edge-to-edge repair with Glasurit® 90-905 Alusilber 90-905 03/2013
Glasurit® 90 Line Additive for basecoat 93-IC 330 01/2015
Glasurit® 90 Interior Color System Metallics/Solids/Pearl Effects 90-IC 440 03/2017
Clears G / C Edition
Glasurit® HS Clear VOC 923-35 10/2011
Glasurit® HS Clear scratch resistant VOC 923-45 10/2011
Glasurit® MS Extra Matt Clear 923-55 08/2018
Glasurit® MS Clear matt Flexible 923-57 08/2018
Glasurit® MS Clear matt Flexible 923-58 08/2018
Glasurit® HS Universal Clear VOC 923-115 10/2011
Glasurit® HS Racing Clear VOC 923-135 10/2011
Glasurit® HS Multi Clear VOC 923-335 10/2011
Glasurit® HS Clear scratch-resistant VOC 923-447 10/2011
Glasurit® HS Clear fast-drying VOC 923-610 09/2019
Glasurit® HS Clear universal VOC 923-625 09/2019
Glasurit® HS Clear superior gloss VOC 923-630 09/2019
Glasurit® HS clear coat superior gloss 923-631 03/2020
Glasurit® HS Clear scratch-resistant VOC 923-645 08/2015
Glasurit® Clear VOC 923-666 01/2015
Glasurit® HS Clear ultra scratch-resistant VOC 925-2002 10/2011
Miscellaneous G / X Edition
Technical InformationProducts VOC
03/2020
ContentsProduct Information
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Glasurit® Tri-coat Additive 90-M5 10/2011
Glasurit® Blending Clear 90-M50 10/2011
Glasurit® Guide Coat black 581-90 08/2019
Glasurit® Cleaner 700-1 10/2011
Glasurit® Degreasing and cleansing agent 700-10 10/2011
Glasurit® Coagulating powder 700-7 10/2011
Glasurit® Stone chip and underbody protection 1109- 10/2011
Glasurit® Blend-in Reducer 352-450 10/2011
Glasurit® Spot-Blender 352-500 10/2011
Glasurit® Spot-Blender - aerosol can 352-500 AE 08/2019
Glasurit® PRO Active Wipes 360-100 08/2015
Additives G / Z Edition
Glasurit® plastic additive 522-10 01/2015
Glasurit® Air-Drying Primer Filler Additive 522-55 03/2018
Glasurit® Brush- and Roll Additive 522-78 03/2019
Glasurit® Soft face Additive 522-111 11/2017
Glasurit® HS Flexible Matting agent 522-322 09/2018
Glasurit® Texture additive Fine 522-345 09/2018
Glasurit® Racing Additive 523-15 11/2017
Glasurit® Air-Drying Additive 523-65 12/2015
Glasurit® Anti-silicone additive 580-100 11/2017
Glasurit® Hardener 929- 10/2011
Glasurit® HS Topcoat Hardener / HS Filler Hardener 929- HS 10/2011
Glasurit® Hardener VOC 929- VOC 03/2018
Technical InformationA 1
10/2011
Notes on the manual
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
The aim of this manual is to provide a survey of vehicle refinishing. Glasurit offers a comprehensive range ofproducts for the repair trade which allows bodyshops to select the ideal refinishing process by choosing fastor slow hardeners, thinners and additives. Only by the selection of and specialisation in certain materials andprocedures can efficient and economic paint jobs be achieved. What is most important for a good result is to stick to the recommended application data in respect of mixingratios, film thickness, viscosity and drying time etc. For all the products mentioned in the individual refinishing processes, we have enclosed, in section >G<,technical data sheets (sub-divided in product groups) in which you will find the application data needed andother useful information. Please note in particular the details on faster and slower thinners and hardeners whichallow you to tailor the chosen product to the working conditions in your own shop. The amount of labour involved in a paint job depends on the condition of the old paintwork and the customer’sdemands. A high quality refinishing job, for example on a virtually new car, must result in a very good finish quality, whichmeans that comprehensive body-filling and priming work with careful fine sanding will be required. Water-based refinishing, which allows to achieve the same quality level as solvent-based paint materials, involvesthe use of appropriate water-based products.The most important advantage of this environmentally acceptable process is that solvent consumption can bereduced by up to 80% compared to solvent-based refinishing systems.The recommended refinishing processes are detailed in section >C< (RATIO-AQUA) or >D< (S10). An “economical repair/respray” is a time-saving and economical process in which the amount of labour involvedshould just meet the customer’s demands as regards the appearance of the refinished areas. This is theprocess recommended for older vehicles.The recommended refinishing processes are detailed in section >D<(S4). In plastics refinishing, the paint materials to be used must be specially adjusted to the properties, for example theelasticity, of the plastics to be refinished.The recommended refinishing processes are detailed in section >D< (S3). The blending-in technique detailed in section >D< (S7a - S9.2) is necessary or recommended when the refinishingof a part (panel repair) would result in a visible colour difference. Blending in is usually less time-consuming andless expensive than colour matching.
Technical InformationA 2
10/2011
Use of matrices
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Section B provides basic information and answers to crucial questions in matrix-shape. • B 1 Pre-treatment of substrates and old paintwork How do you clean and sand the different substrates?
• B 2 Metallic substrates – body fillers Which body fillers can be used for which metallic substrates?
•B 3 Metallic substrates – undercoats Which primers and/or primer fillers can be used for which metallic substrates?
• B 4 Coating of plastics – undercoats Which undercoat materials can be applied to which plastics?
• B 5 Primer / primer filler / surfacer combinations Which primer fillers or fillers can be used over which primers?
• B 6 Sanding of undercoats Which sanding techniques and pads can be used for the different undercoat materials?
• B 7 Primer filler / surfacer / topcoat combinations Which topcoats can be applied to which primer fillers or fillers?
• B 8 Hardeners / activators for undercoats Which hardeners or activators are needed for which undercoat materials?
• B 9 Hardeners for topcoats / clears Which hardeners can be used for which topcoats or clears?
Technical InformationA 3
10/2011
Paint shop operations
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
The appearance of a finish depends not only on the paint materials and how they are processed but also onthe condition of the spraying and drying booths and that of the other equipment. Paints should be applied atan ambient temperature of between 18°C and 25°C (64-77°F). The air used for spraying must be free of oiland water (check the oil separator daily). The spraying pressure must be constant. The choice of the correctnozzle and the cleanliness of both the nozzles and the air caps are also important since there will not be aneven spraying pattern otherwise. Spraying and drying booths are kept free of dust mainly by means of an efficiently functioning ventilation system,which is also necessary for safety reasons, in order to avoid build-ups of explosive mixtures of solvent vapourand air. The result of a repair job depends not only on the spraying technique, but to a great extent on a properventilation system. The volume of air needed in a spray booth is approx. 20,000 m³/hour (700,000 cu.ft/hour).The air used for spraying should not be drawn from the workshop because this would require a higher level ofdust filtering. The air drawn in from outside must be filtered and warmed. This applies particularly in the colder seasons andespecially in the case of combi-booths, i.e. spray booths that also serve as drying booths. The amount of air to be drawn in depends on the size of the spray booth and is also directly related to theamount of air extracted. In all cases, however, enough air must be drawn in for the pressure in the spray boothto be higher than the pressure outside. A ratio of exhaust air to incoming air of approx. 1:1.05 is sufficient. Negative pressure inside the booth will inevitably lead to defects in fresh finishes because the air coming in fromoutside around doors and through other openings carries dirt particles that will contaminate fresh paintwork.This is why overpressure in the spray booth, combined with efficient filters in the ventilation system, play aparticularly important part for a flawless finish. The above does not apply in the UK, where pressure in the spraybooth is required to be lower than the pressure outside the booth. If there is a drying oven connected to thespray booth, pressure in the oven must be higher than that in the booth in order to prevent contamination of theobjects being dried by overspray from the spray booth, for example. The filters used must of course be adapted to this purpose and kept clean at all times. The fine filters shouldremove at least 99.8% of the dust contained in the air being filtered. It is particularly important that the incomingair be directed through a suitable system of distributors that can prevent the creation of excessively strong aircurrents. Such air currents would not only inconvenience the spray-painter, but also form vortexes that retain thepaint dust longer. This paint dust would then gradually be deposited on the freshly painted surface and spoil it. The air speed should not be too high either since the paint applied would then dry too quickly on the surface.The result would be poor flow and also the formation of specks due to insufficient overspray absorption.Furthermore, if the surface dries too rapidly, this can lead to loss of gloss and wrinkling. Wherever possible, theincoming air ducts or distributors should be spread over the whole ceiling area. An air speed of 0.3 m/sec (which means that the air is renewed approximately 350 times per hour), measuredright across the spray booth, is generally sufficient.
Technical InformationA 3
10/2011
Paint shop operations
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
The air is best extracted via outlet ducts down near the floor of the spray booth (separation by means offiltering). Employee safety and operating regulations Finally it should be noted that installations of this kind must be designed, set up and operated in accordancewith the applicable rules on the prevention of accidents, in Germany in accordance with BGV D24 and D25. The storage of paints, solvents and thinners is subject to the regulations concerning flammable liquids. Applicable MAC values (maximum allowable concentrations of substances that are hazardous to health) mustbe observed in all work areas. Noise pollution from the equipment used can be avoided if all machines and toolscomply with the maximum levels laid down in the accident prevention regulations concerning noise (in Germany,BGV B3). Remark: All nationally and/or locally applicable working directions, operating instructions and safety regulations as well asexisting rules for the prevention of accidents and regulations on dangerous substances must be observed. The laws and regulations referred to in this manual are applicable to the Federal Republic of Germany only.
Technical InformationB 1
11/2011
Pre-treatment of substrates and old paintwork
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Metallic Substrates
Sheet steel
360-4Glasurit® Metalcleaner
1 x wipe dry P80-P150
360-4Glasurit® Metalcleaner
1 x wipe dry
Galvanisedsteel
360-4Glasurit® Metalcleaner
1 x wipe dry sandingpad
360-4Glasurit® Metalcleaner
1 x wipe dry
Aluminium
360-4Glasurit® Metalcleaner
1 x wipe dry P150-P180
360-4Glasurit® Metalcleaner
1 x wipe dry
Plastics
Plastics
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry damaged
area:P80-P600entire part:
sandingpad
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry
Plastics PUfoam andpolyamide(PA)
Heating toremove mouldrelease agents
and water 60 °C1 hour
541-30Glasurit®Universal cleanerfor plastics 1x
moistenedcloth
damagedarea:
P80-P600entire part:
sandingpad
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry
GRP/SMC
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry P180-
P240
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry
Technical InformationB 1
11/2011
Pre-treatment of substrates and old paintwork
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Old paintwork / new panels
New panelsfactory-primed
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry sanding
pad orP240-P320
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Old paintwork
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry sanding
pad orP240-P320
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Old paintworksolvent-sensitive
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry sanding
pad orP240-P320
P320-P400fade-
out area
700-1Glasurit® Cleaner
1 x wipe dry
Technical InformationB 2
03/2014
Metallic substrates - body fillersProduct recommendations for car refinishing only
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Body Fillers Sheet steel Galvanisedsheet steel
Aluminium /Magnesium
OEM partswith e-coat
Old paintwork
839-20/20K Glasurit® Multi PurposeBody Filler
839-25 Glasurit® Fine Body Filler
839-55 Glasurit® Soft-Body Filler
839-70/70K Glasurit® Universal BodyFiller
839-85 Glasurit® Multi BrushingBody Filler
901-21 Glasurit® Glass fibre bodyfiller
1006-26 Glasurit® UP-Spray Fillergrey
S1 S1 S1
not applicable
direct application possible
S 1 cf. refinishing process S 1
Technical InformationB 3
01/2018
Metallic substrates – undercoatsProduct recommendations for car refinishing only
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primers Sheet steel Galvanisedsheet steel
Aluminium/magnesium
OEM partswith e-coat
Old paintwork
283-150 Glasurit® Etch Primer Filler
Primer Fillers Sheet steel Galvanisedsheet steel
Aluminium/magnesium
OEM partswith e-coat
Old paintwork
151-170 Glasurit® UV Primer fillergrey
176-72 Glasurit® 1K Primer Filler 2 2 2 2 2
283-150 Glasurit® Etch Primer Filler
285-230 Glasurit® Primer Filler Pro,white
285-270 Glasurit® Primer Filler Pro,grey
285-290 Glasurit® Primer Filler Pro,black
285-505 Glasurit® HS Primer Filler,grey
1 1 1 1 1
285-555 Glasurit® HS Primer Filler,black
1 1 1 1 1
285-655 Glasurit® HS Primer Filler,white
1 1 1 1 1
285-700 Glasurit® Primer Filler 1 1 1 1 1
285-730 Glasurit® Primer Filler, white 1 1 1 1 1
285-790 Glasurit® Primer Filler, black 1 1 1 1 1
801-72 Glasurit® Epoxy Primer Fillergrey
Technical InformationB 3
01/2018
Metallic substrates – undercoatsProduct recommendations for car refinishing only
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Fillers and Surfacers Sheet steel Galvanisedsheet steel
Aluminium/magnesium
OEM partswith e-coat
Old paintwork
285-0 Glasurit® HS TransparentSealer
1 1
285-31 Glasurit® HS VOC Non-Sanding Filler, light grey
1 1 1 1 1
285-38 Glasurit® HS VOC Non-Sanding Filler, white
1 1 1 1 1
285-49 Glasurit® HS VOC Non-Sanding Filler, black
1 1 1 1 1
285-95 Glasurit® HS VOC TintableFiller, transparent
1 1 1 1 1
not applicable
can be applied directly, even on bare metal substrates
prime larger sand-throughs / bare metal substrates with: Glasurit® 285-270 Primer Filler Pro grey or Glasurit® 283-150 EtchPrimer Filler
prime larger sand-throughs / bare metal substrates with: Glasurit® 801-72 Epoxy Primer Filler grey
Technical InformationB 4
07/2016
Coating of plastics - undercoatsProduct recommendations for car refinishing only
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Body Fillers PU-RIM PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC
839-90 Glasurit® Plastic Body Filler
839-20/20K Glasurit® Multi PurposeBody Filler
1006-26 Glasurit® UP-Spray Fillergrey
Primer PUR- RIM
PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC
934-10 Glasurit® 1K PlasticAdhesion Primer
1 1 1
1 1 1 1
Primer Fillers PUR- RIM
PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC
151-170 Glasurit® UV Primer fillergrey
4 4 4 4 4 4 4
285-230 Glasurit® Primer Filler Pro,white
3 3 3 3 3 3 3 3
285-270 Glasurit® Primer Filler Pro,grey
3 3 3 3 3 3 3 3
285-290 Glasurit® Primer Filler Pro,black
3 3 3 3 3 3 3 3
285-505 Glasurit® HS Primer Filler,grey
2 2 2 2 2 2 2
285-555 Glasurit® HS Primer Filler,black
2 2 2 2 2 2 2
285-655 Glasurit® HS Primer Filler,white
2 2 2 2 2 2 2
285-700 Glasurit® Primer Filler 2 2 2 2 2 2 2
285-730 Glasurit® Primer Filler, white 2 2 2 2 2 2 2
285-790 Glasurit® Primer Filler, black 2 2 2 2 2 2 2
Technical InformationB 4
07/2016
Coating of plastics - undercoatsProduct recommendations for car refinishing only
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Fillers and Surfacers PUR- RIM
PP-EPDM ABS GRP/SMC PC-PBTP PA PPO rigid PVC
285-0 Glasurit® HS TransparentSealer
3 3 3 3 3 3 3
285-31 Glasurit® HS VOC Non-Sanding Filler, light grey
3 3 3 3 3 3 3
285-38 Glasurit® HS VOC Non-Sanding Filler, white
3 3 3 3 3 3 3
285-49 Glasurit® HS VOC Non-Sanding Filler, black
3 3 3 3 3 3 3
285-95 Glasurit® HS VOC TintableFiller, transparent
3 3 3 3 3 3 3
not applicable
priming coat not required
application in paint system only – cf. refinishing process S3a
add 25% of Glasurit® 522-111 Softface Additive application in paint system only – cf. refinishing process S3a
By addition of Glasurit® 522-10 plastic additive – cf. refinishing process S 3 or Technical Data Sheets 285-230, -270, -290
application in paint system only – cf. refinishing process S 15
Technical InformationB 5
04/2014
Primer / primer filler / surfacer combinations
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
283-150 Primer 801-72 Primer 285-270 Primer
176-72 Glasurit® 1K Primer Filler
285-505 Glasurit® HS Primer Filler,grey
285-555 Glasurit® HS Primer Filler,black
285-655 Glasurit® HS Primer Filler,white
285-700 Glasurit® Primer Filler
285-730 Glasurit® Primer Filler, white
285-790 Glasurit® Primer Filler, black
283-150 Primer 801-72 Primer 285-270 Primer
285-0 Glasurit® HS TransparentSealer
285-31 Glasurit® HS VOC Non-Sanding Filler, light grey
285-38 Glasurit® HS VOC Non-Sanding Filler, white
285-49 Glasurit® HS VOC Non-Sanding Filler, black
285-95 Glasurit® HS VOC TintableFiller, transparent
not applicable
possible primer / primer filler / surfacer combinations
Technical InformationB 6
07/2016
Sanding of undercoats
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Body Fillers Coarsesanding
with orbitalsander
Fine sandingwith orbital
sander
Manualsanding, wet
839-20/20K Glasurit® Multi PurposeBody Filler
P80 / P150 P240
839-25 Glasurit® Fine Body Filler P80 / P150 P240
839-55 Glasurit® Soft-Body Filler P80 / P150
839-70/70K Glasurit® Universal BodyFiller
P80 / P150 P240
839-85 Glasurit® Multi BrushingBody Filler
P80 / P150 P240
839-90 Glasurit® Plastic Body Filler P80 / P150 P240 / P320
901-21 Glasurit® Glass fibre bodyfiller
P80 / P150
1006-26 Glasurit® UP-Spray Fillergrey
P150 P240
Technical InformationB 6
07/2016
Sanding of undercoats
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primer Fillers Coarsesanding
with orbitalsander
Fine sandingwith orbital
sander
Manualsanding, wet
151-170 Glasurit® UV Primer fillergrey
P400 - P500 P800
176-72 Glasurit® 1K Primer Filler P400 - P500 P800
283-150 Glasurit® Etch Primer Filler P800
285-230 Glasurit® Primer Filler Pro,white
P400 - P500 P800
285-270 Glasurit® Primer Filler Pro,grey
P400 - P500 P800
285-290 Glasurit® Primer Filler Pro,black
P400 - P500 P800
285-505 Glasurit® HS Primer Filler,grey
P400 - P500 P800
285-555 Glasurit® HS Primer Filler,black
P400 - P500 P800
285-655 Glasurit® HS Primer Filler,white
P400 - P500 P800
285-700 Glasurit® Primer Filler P400 - P500 P800
285-730 Glasurit® Primer Filler, white P400 - P500 P800
285-790 Glasurit® Primer Filler, black P400 - P500 P800
801-72 Glasurit® Epoxy Primer Fillergrey
P400 - P500 P800
Fillers and Surfacers Coarsesanding
with orbitalsander
Fine sandingwith orbital
sander
Manualsanding, wet
285-95 Glasurit® HS VOC TintableFiller, transparent
P400 - P500 P800
Technical InformationB 7
11/2017
Primer filler / surfacer / topcoat combinations
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primer Fillers 22 VOC 22 VOC MC600 90
151-170 Glasurit® UV Primer fillergrey
176-72 Glasurit® 1K Primer Filler
283-150 Glasurit® Etch Primer Filler
285-230 Glasurit® Primer Filler Pro,white
285-270 Glasurit® Primer Filler Pro,grey
285-290 Glasurit® Primer Filler Pro,black
285-505 Glasurit® HS Primer Filler,grey
285-555 Glasurit® HS Primer Filler,black
285-655 Glasurit® HS Primer Filler,white
285-700 Glasurit® Primer Filler
285-730 Glasurit® Primer Filler, white
285-790 Glasurit® Primer Filler, black
801-72 Glasurit® Epoxy Primer Fillergrey
934-70 Glasurit® 2K Plastic PrimerFiller
Technical InformationB 7
11/2017
Primer filler / surfacer / topcoat combinations
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Fillers and Surfacers 22 VOC 22 VOC MC600 90
285-0 Glasurit® HS TransparentSealer
285-31 Glasurit® HS VOC Non-Sanding Filler, light grey
285-38 Glasurit® HS VOC Non-Sanding Filler, white
285-49 Glasurit® HS VOC Non-Sanding Filler, black
285-95 Glasurit® HS VOC TintableFiller, transparent
not applicable
possible primer filler / surfacer / topcoat combinations
Technical InformationB 8
04/2014
Hardeners / activators for undercoats
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Body Fillers 948-22 948-36 / -52
839-20/20K Glasurit® Multi PurposeBody Filler
839-25 Glasurit® Fine Body Filler
839-55 Glasurit® Soft-Body Filler
839-70/70K Glasurit® Universal BodyFiller
839-85 Glasurit® Multi BrushingBody Filler
839-90 Glasurit® Plastic Body Filler
901-21 Glasurit® Glass fibre bodyfiller
1006-26 Glasurit® UP-Spray Fillergrey
Primers 352-230 929-26
283-150 Glasurit® Etch Primer Filler
285-26 Glasurit® 2K SF Primer
Technical InformationB 8
04/2014
Hardeners / activators for undercoats
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primer Fillers 352-228 929-55 929-56 929-58 965-60 93-E3
283-150 Glasurit® Etch Primer Filler
285-230 Glasurit® Primer Filler Pro,white
285-270 Glasurit® Primer Filler Pro,grey
285-290 Glasurit® Primer Filler Pro,black
285-505 Glasurit® HS Primer Filler,grey
1
285-555 Glasurit® HS Primer Filler,black
1
285-655 Glasurit® HS Primer Filler,white
1
285-700 Glasurit® Primer Filler 1
285-730 Glasurit® Primer Filler, white 1
285-790 Glasurit® Primer Filler, black 1
801-72 Glasurit® Epoxy Primer Fillergrey
934-70 Glasurit® 2K Plastic PrimerFiller
176-72 Glasurit® 1K Primer Filler
Technical InformationB 8
04/2014
Hardeners / activators for undercoats
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Fillers and Surfacers 929-55 929-56
285-0 Glasurit® HS TransparentSealer
2
285-31 Glasurit® HS VOC Non-Sanding Filler, light grey
2
285-38 Glasurit® HS VOC Non-Sanding Filler, white
2
285-49 Glasurit® HS VOC Non-Sanding Filler, black
2
285-95 Glasurit® HS VOC TintableFiller, transparent
not applicable
possible undercoat / hardener or activator combinations
for large areas and rather high application temperatures
for small areas and rather low application temperatures
Technical InformationB 9
11/2017
Hardeners for topcoats / clears
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Topcoats 929-91 929-93 929-94 929-31 929-33 929-34 929-61 929-63 929-64
22- VOC 22 Line Glasurit® HS 2KTopcoat VOC
22- VOCMC600
22 Line Glasurit® HS 2KTopcoat VOC MC600
Clears 929-91 929-93 929-94 929-31 929-33 929-34 929-97
923-35 Glasurit® HS Clear VOC
923-45 Glasurit® HS Clear scratchresistant VOC
923-55 Glasurit® MS Extra MattClear
1 1
1 1 1
923-58 Glasurit® MS Clear mattFlexible
1 1 1 1 1 1
923-115 Glasurit® HS Universal ClearVOC
923-135 Glasurit® HS Racing ClearVOC
923-335 Glasurit® HS Multi ClearVOC
923-447 Glasurit® HS Clear scratch-resistant VOC
Clears 929-61 929-63 929-64
923-610 Glasurit® HS Clear fast-drying VOC
923-625 Glasurit® HS Clear universalVOC
923-630 Glasurit® HS Clear superiorgloss VOC
923-645 Glasurit® HS Clear scratch-resistant VOC
Technical InformationB 9
11/2017
Hardeners for topcoats / clears
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
not applicable
possible topcoat or clear / hardener combinations
Note: Changing mixing ratio
Technical InformationRATIO Aqua
01/2015
Glasurit® RATIO Aqua
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: 90 Line repair process for a fast, economical quality finish in compliance with international VOC legislation.
Cleaning
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Mechanicalde-rusting of
damaged areasP16-P150
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Body Filler(coarse +fine)
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
4 min. P80/P150coarsesanding
P240/P320 finesanding
700-1Glasurit® Cleaner
1 x wipe dry
Primer
283-150Glasurit® EtchPrimer Filler
352-230Glasurit®Activator
1:1mixingstick
HVLP1.3-1.7
mm2.0-3.0 bar
1 thin coat10-15 µm
10-15 min.at 20°C
Primer Filler
285-505, -555,-655Glasurit® HSPrimer Filler
929-55, -56Glasurit® HSPrimer Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
250-70 µm
20 min.at 60°C
P400- P500
700-11x
wipe dry
or alternatively: Glasurit® Primer Filler 285-700 /-730 /-790
Basecoat
90 Line Glasurit®Basecoat
93-E3Glasurit®Adjusting base
2:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2 + 1/2spraycoats
flash offuntil mattbetween
spraycoatsand before
clear
Clear
923-335Glasurit® HSMulti Clear VOC
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
30 min. at60 °C
Technical InformationRATIO HS
11/2017
Glasurit® RATIO HS
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Solvent-borne repair process for a fast, economical quality finish with 22 Line HS 2K Topcoat.
Cleaning
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Mechanicalde-rusting of
damaged areasP16-P150
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Body Filler(coarse +fine)
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
4 min. P80/P150coarsesanding
581-90Glasurit® GuideCoat black
P240/P320 finesanding
700-11x
wipe dry
Primer
283-150Glasurit® EtchPrimer Filler
352-230Glasurit®Activator
1:1mixingstick
HVLP1.3-1.7
mm2.0-3.0 bar
1 thin coat10-15 µm
10 min.at 20°C
Primer Filler
285-505, -555,-655Glasurit® HSPrimer Filler
929-55, -56Glasurit® HSPrimer Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
250-70 µm
20 min.at 60°C
P400- P500
700-11x
wipe dry
or alternatively: Glasurit® Primer Filler 285-700 /-730 /-790
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
30 min. at60 °C
or
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC MC600
929-61, -63, -64Glasurit®Hardener VOC
352-10, -30, -40Glasurit®Reducer
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
30 min. at60 °C
Technical InformationS 1
03/2018
Spray Filler System1006-26 Glasurit® UP-Spray Filler grey
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: This system should be applied when extensive body-filling is required (e.g. to repair damage caused by hail).
Cleaning
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Mechanicalde-rusting of
damaged areasP16-P150
700-10 Glasurit®Degreasing andcleansing agent,alternatively:541-5
1 x wipe dry
Body Filler
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
3-5 min. P80/P150coarsesanding
Primer
285-26Glasurit® 2K SFPrimer
929-26Glasurit® 2K SFPrimer Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
120-25 µm
20 min.at 60°C
11 min.
Alternatively: 151-170 Glasurit® UV Primer Filler grey considering a minimum film thickness of 60 µm.
Spray BodyFiller
1006-26Glasurit® UP-Spray Filler grey
948-22Glasurit®Hardener
1400: 50 2.5-3.0mm
2.0-3.0 bar
3-5150 –
300 µm
3 - 4 h at20°C or
30 min. at60°C
10 min. P150coarsesandingP240-P320fine
sanding
Caution: Primesand-throughon galvanisedor aluminium
substrateswith 285-26
Remark: If a film thickness of > 300 μm is required, a second spray body filler layer can be applied withoutintermediate sanding after having dried the first layer.
or alternatively: 839-85 Glasurit® Multi Brushing Body Filler
Primer Filler
285-505, -555,-655Glasurit® HSPrimer Filler
929-55, -56Glasurit® HSPrimer Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
2spraycoats
25 min. at60 °C
5-10 min. P400- P500
or alternatively: Glasurit® 285- HS Primer Filler/Filler
Topcoat
22 Line Glasurit®HS 2K Topcoat
or 55 Line Glasurit®Basecoat
923-Glasurit® MS / HSClear
or 90 Line Glasurit®Basecoat
923-Glasurit® MS / HSClear
Technical InformationS 3
10/2011
Painting of Plastics on Cars
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Multi-purpose system suitable for all paintable plastic materials on cars. Pure polypropylene (PP) andpolyethylene (PE) cannot be painted. In order to guarantee paintability, modified plastic materials are usedfor vehicle parts that shall be painted. Although these plastic parts are often labelled PP, this material isnevertheless paintable.
Cleaning
541-30Glasurit®Universal cleanerfor plastics 1 x damaged
area:P80-P600entire part:
sandingpad
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry
Heating ofPU foam and
polyamide(PA) to removemould release
agents and water,respectively
60 °C1 hour
1xmoistened
cloth
Fine BodyFiller
839-90Glasurit® PlasticBody Filler
948-36Glasurit®Hardener Paste
+ 2-3% 25 - 35min. at20 °C
P80/P150coarsesanding
581-90Glasurit® GuideCoat black
P240/P320 finesanding
Primer Filler
285-31Glasurit® HSNon-SandingFiller light grey
929-56Glasurit® HSVOC PrimerHardener normal
522-10Glasurit® plasticadditive
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
1/2 + 120 -
35 µm
20 minat 20°C
or alternatively: 285-38, 285-49 Glasurit® Non-Sanding-FillerSystem S 3a
Topcoats
22 Line Glasurit®HS 2K TopcoatVOC
or 90 Line Glasurit®Basecoat
923-Glasurit® HSClear VOC
Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toPU foam.22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC
522-111Glasurit® Softface Additive
4:1
Mixture: HS2K Topcoat /Softface Additiveor HS Clear /Softface Additive
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
16 h at20 °C or
40 min. at60 °C
Technical InformationS 3a
08/2019
Painting of Plastics on Cars
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Multi-purpose system suitable for all paintable plastic materials on cars. Pure polypropylene (PP) andpolyethylene (PE) cannot be painted. In order to guarantee paintability, modified plastic materials are usedfor vehicle parts that shall be painted. Although these plastic parts are often labelled PP, the material isnevertheless paintable.
Cleaning
541-30Glasurit®Universal cleanerfor plastics 1 x damaged
area:P80-P600entire part:
sandingpad
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry
Heating ofPU foam and
polyamide(PA) to removemould release
agents and water,respectively
60 °C1 hour
1xmoistened
cloth
Fine BodyFiller
839-90Glasurit® PlasticBody Filler
948-36Glasurit®Hardener Paste
+ 3 % 25 - 35min. at20 °C
P80/P150coarsesanding
581-90Glasurit® GuideCoat black
P240/P320 finesanding
AdhesionPrimer
934-10Glasurit® 1KPlastic AdhesionPrimer 2 min. 1
5 - 10 µm15 min
at 20 °C
Fillers andSurfacers
285-95Glasurit® HSTintable Filler
22 Line Glasurit®HS 2K TopcoatVOC
2:1mixingstick
Mixture: HS VOCTintable Filler/ HS2K Topcoat
522-111Glasurit® Softface Additive
4:1
Mixture: HS VOCTintable Filler/Softface Additive
929-Glasurit® HSFiller Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
240-60 µm
4 h at20 °C or
40 min. at60 °C
P 800
or alternatively: Glasurit® HS Primer Filler/Filler 285-505, -555, -655, -700, -730, -790
Topcoats
22 Line Glasurit®HS 2K TopcoatVOC
or 90 Line Glasurit®Basecoat
923-Glasurit® HSClear VOC
1. Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toPU foam.
Technical InformationS 3a
08/2019
Painting of Plastics on Cars
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC
522-111Glasurit® Softface Additive
4:1
Mixture: HS2K Topcoat /Softface Additiveor HS Clear VOC/Softface Additive
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
16 h at20 °C or
40 min. at60 °C
Technical InformationS 3b
12/2013
Painting of Factory-Primed Plastic Parts
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: New plastic hang-on parts are often factory-primed at the manufacturer’s plant. Field tests have shownthat the quality of such OEM primer coats varies significantly and may result in deficiencies with regard toadhesion as well as stone-chip and solvent resistance. In order to achieve the quality standards of OEMfinishes, we recommend the use of a filler on all new plastic hang-on parts to ensure sufficient stone-chipresistance.
Solventresistancetest
352-91Glasurit®Reducer normal
1 x
Primer coatswells, becomessticky, softens?
no = solvent-resistant
yes = solvent-sensitive
extremely solvent-sensitive
(complete dissolution or wrinkling during solvent resistance test) This indicates that the undercoat is notsound. Remove it completely before painting the part and then apply the desired paint system as described inprocess S 3.
solvent-sensitive Clean the part with Glasurit 700-1 Cleaner using a grey sanding pad. Carry out a second cleaning step alsowith 700-1 and wipe the part dry with a clean cloth. Allow the part to flash off for at least 10 minutes.Before topcoating, apply a “mild” Glasurit 285- sanding primer filler or filler plasticised with Glasurit 522-111Softface Additive. Spray several thin coats with long intermediate flash-off intervals.Attention! Any sand-throughs must then first be primed with Glasurit 934-10 1K Plastic Primer.
Primer filler
285-505, -555,-655Glasurit® HSPrimer Filler
522-111Glasurit® Softface Additive
4:1
Mixture: HSPrimer Filler /Softface Additive
929-Glasurit® HSFiller Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
2 thincoats40 -
60 µm
flash offuntil mattbetween
spraycoats
4 h at20 °C or
40 min. at60 °C
P 800
Alternatively: 285-95 Glasurit® HS Tintable Filler
solvent-resistant
700-1Glasurit® Cleaner
wipe dry 1x witha grey
sandingpad
700-1Glasurit® Cleaner
1 x wipe dry
Technical InformationS 3b
12/2013
Painting of Factory-Primed Plastic Parts
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primer filler
285-31Glasurit® HSNon-SandingFiller light grey
929-56Glasurit® HSVOC PrimerHardener normal
522-10Glasurit® plasticadditive
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
1/2 + 120 -
35 µm
20 minat 20°C
or alternatively: Glasurit 285-38 or -49 Non-Sanding Filler.
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC
(1)
or 90 Line Glasurit®Basecoat
923-Glasurit® ClearVOC
(1)
(1) Topcoats and clears must be plasticised by adding Glasurit 522-111 Softface Additive before beingapplied to soft plastics (soft PU foam).22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit®
522-111Glasurit® Softface Additive
4:1
Mixture of HS2K Topcoat +Softface Additiveor VOC Clear +Softface Additive
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
16 h at20 °C or
45 min. at60 °C
Technical InformationS 3c
11/2018
Painting of Plastics on Cars
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Multi-purpose system suitable for all paintable plastic materials on cars. Pure polypropylene (PP) andpolyethylene (PE) cannot be painted. In order to guarantee paintability, modified plastic materials are usedfor vehicle parts that shall be painted. Although these plastic parts are often labelled PP, this material isnevertheless paintable.
Cleaning
541-30Glasurit®Universal cleanerfor plastics 1 x damaged
area:P80-P600entire part:
sandingpad
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry
Heating ofPU foam and
polyamide(PA) to removemould release
agents and water,respectively
60 °C1 hour
700-101x
moistenedcloth
Fine BodyFiller
839-90Glasurit® PlasticBody Filler
948-36Glasurit®Hardener Paste
+ 2-3% 25 - 35min. at20 °C
P80/P150coarsesanding
581-90Glasurit® GuideCoat black
P240/P320 finesanding
700-101x
moistenedcloth
Wet-on-WetPrimer Filler
285-270, -230,-290Glasurit® PrimerFiller Pro
929-58Glasurit® HSFiller Hardener
522-10Glasurit® plasticadditive
4:1:1mixingstick
HVLP1.3-1.4
mm2.0 bar
1/2 +1spraycoats30-40 µm
25 -30 minat 20°C
SandingPrimer Filler
285-270, -230,-290Glasurit® PrimerFiller Pro
929-58Glasurit® HSFiller Hardener
522-10Glasurit® plasticadditive
5:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
1/2 +1spraycoats50-70 µm
35 min.at 60°C
Topcoats
22 Line Glasurit®HS 2K TopcoatVOC
or 90 Line Glasurit®Basecoat
923-Glasurit® HSClear VOC
1. Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toplastics.22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC
522-111Glasurit® Softface Additive
4:1
Technical InformationS 3c
11/2018
Painting of Plastics on Cars
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Mixture: HS2K Topcoat /Softface Additiveor HS Clear VOC/Softface Additive
929-Glasurit® HSTopcoat Hardener
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
16 h at20 °C or
40 min. at60 °C
2. Topcoats or clears must be elastified by adding Glasurit® 522-111 Softface Additive before being applied toPU foam.22 Line Glasurit®HS 2K TopcoatVOC or 923-Glasurit® HSClear VOC
522-111Glasurit® Softface Additive
2:1mixingstick
Mixture: HS2K Topcoat /Softface Additiveor HS Clear VOC/Softface Additive
929-Glasurit® HSTopcoat Hardener
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
250-70 µm
16 h at20 °C or
40 min. at60 °C
Technical InformationS 4
04/2014
Economical Repair System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Economical repair process for time-saving, low-cost refinishing of small defects and for coating new parts.Considerable time is saved by a wet-on-wet application of Glasurit® 285-31, 285-38, 285-49 Non-SandingFiller.
Cleaning
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Mechanicalde-rusting of
damaged areasP16-P150
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Body Filler(coarse +fine)
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
3-5 min. P80/P150coarsesanding
581-90Glasurit® GuideCoat black
P240/P320 finesanding
700-11x
wipe dry
Primer
283-150Glasurit® EtchPrimer Filler
352-230Glasurit®Activator
1:1mixingstick
HVLP1.3-1.8
mm2.0-3.0 bar
1 thin coat10-15 µm
10 min.at 20°C
Fillers andSurfacers
285-38, -49Glasurit® HSNon-SandingFiller
929-55, -56Glasurit® HSPrimer Hardener
352-Glasurit®Reducer
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
1 - 220-35 µm
10 -20 minat 20°C
or alternatively: Glasurit® HS Tintable Filler 285-95; Glasurit® 285-31 HS Non-Sanding Filler
Topcoats
22 Line Glasurit®HS 2K TopcoatVOC
or 90 Line Glasurit®Basecoat
923-Glasurit® ClearVOC
Technical InformationS 4a
10/2011
Repair System for new e-coated parts
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Economical repair process for time-saving, low-cost refinishing of e-coated parts without sanding.Considerable time is saved by a wet-on-wet application of Glasurit® 285-31, 285-38, 285-49 Non-SandingFiller.
Remarks: New E-coated parts have to be protected from sun light; because there is a risk of loose adhesion andcorrosion protection.
Cleaning
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Fillers andSurfacers
285-31Glasurit® HSNon-SandingFiller light grey
929-55, -56Glasurit® HSPrimer Hardener
352-Glasurit®Reducer
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
1 - 220-35 µm
10 -20 minat 20°C
or alternatively: Glasurit® 285-38, 285-49 HS Non-Sanding Filler
Topcoats
22 Line Glasurit®HS 2K TopcoatVOC
or 90 Line Glasurit®Basecoat
923-Glasurit® ClearVOC
Technical InformationS 7a
06/2018
Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: In general, panel repairs with solid colours – including a complete refinish of the damaged body part – donot cause any problems. When colour differences beyond allowable limits are to be expected, and whenthe areas to be refinished are not limited by trim strips or edges, it may be more advantageous to even outcolour differences by means of a gradual blend-in. This procedure can be considerably more efficient andeconomical than time-consuming colour matching.
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
563-808Glasurit® FlattingPaste
563-808 +sanding
pad
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
22 Line Glasurit®HS 2K TopcoatVOC
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
1 - 2
22 Line Glasurit®HS 2K TopcoatVOC
2:1+10%mixingstick
HVLP1.3 mm
1.0-2.0 bar
1fading outinto the
surroundingarea
5 min. at20°C
Technical InformationS 7a
06/2018
Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
923-Glasurit® ClearVOC
Referto the
technicaldata sheet
HVLP1.3 mm
2.0-3.0 bar
1 - 2 30 min. at60 °C
For blending in on fade-out areas / clearcoat transition352-450Glasurit® Blend-in Reducer
HVLP1.3 mm
1.0-2.0 bar
1 - 2 30 min. at60 °C
Alternatively: 352-500 Glasurit® Spot-Blender
Technical InformationS 7b
06/2018
Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC MC600
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: In general, panel repairs with solid colours – including a complete refinish of the damaged body part – donot cause any problems. When colour differences beyond allowable limits are to be expected, and whenthe areas to be refinished are not limited by trim strips or edges, it may be more advantageous to even outcolour differences by means of a gradual blend-in. This procedure can be considerably more efficient andeconomical than time-consuming colour matching.
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
563-808Glasurit® FlattingPaste
563-808 +sanding
pad
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
22 Line Glasurit®HS 2K TopcoatVOC MC600
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
1 - 2
22 Line Glasurit®HS 2K TopcoatVOC MC600
3:1:1mixingstick
HVLP1.3 mm
1.0-2.0 bar
1fading outinto the
surroundingarea
5 - max.60 min.at 20°C
Technical InformationS 7b
06/2018
Blend-in Refinishing System22 Line Glasurit® HS 2K Topcoat VOC MC600
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
923-Glasurit® ClearVOC
Referto the
technicaldata sheet
HVLP1.3 mm
2.0-3.0 bar
1 - 2 30 min. at60 °C
For blending in on fade-out areas / clearcoat transition352-450Glasurit® Blend-in Reducer
HVLP1.3 mm
1.0-2.0 bar
1 - 2 30 min. at60 °C
Alternatively: 352-500 Glasurit® Spot-Blender
Technical InformationS 9
01/2012
Blending in on the panel being repaired with Glasurit® 90 LineBasecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: In principle, panel repairs with basecoat/clearcoat systems are possible, and therefore, generally, it isnot necessary to respray adjacent body parts. When colour differences beyond allowable limits are to beexpected and when the areas to be re sprayed are not limited by trim strips or edges, the more appropriatemethod to balance colour differences may be to blend in the damaged area and the adjacent part, ifrequired.This procedure can be considerably more efficient and economical than time-consuming colourmatching.
1. Pre-treatment of the blending area700-1Glasurit® Cleaner
1 x wipe dry Foam padP1000-P2000
700-1Glasurit® Cleaner
1 x wipe dry
See the Glasurit RATIO System TDS for the preparation of the damaged area.
2. Refinishing of the panel to be repaired90-M50Glasurit®Blending Clear
2:193- E3 or
93- E3slow
HVLP 1.3 mm 2.0 bar
1
Technical InformationS 9
01/2012
Blending in on the panel being repaired with Glasurit® 90 LineBasecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
3. Refinishing of the damaged area90 Line Glasurit®Basecoat
2:193- E3 or
93- E3slow
HVLP1.3 mm
1.0-2.0 bar
2fading outinto the
surroundingarea
flash offuntil matt
Note:Apply two spraycoats without intermediate flash-off.For a soft transition, the second spraycoatoverlaps the first.
4. Application of the coat to match the effect90 Line Glasurit®Basecoat
2:193- E3 or
93- E3slow
HVLP1.3 mm
1.0-2.0 bar
1/2 tomatcheffect
flash offuntil matt
Note:Apply the coat to match the effect.
5. Clearcoat application923-Glasurit® HSClear VOC
Referto the
technicaldata sheet
HVLP1.3 mm2.0 bar
1 1/2 - 2 30 min. at60 °C
Note:Apply the clearcoat. When the areas to be refinishedare not limited by trim strips or edges, the clear mustbe applied fading out around the repair. It may onlybe dried after levelling with 352-450 or 352-500.
Technical InformationS 9
01/2012
Blending in on the panel being repaired with Glasurit® 90 LineBasecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
6. Levelling of clearcoat in fade-out or transition area352-450 Glasurit®Blend-in Reduceror 352-500Glasurit® Spot-Blender
HVLP1.3 mm
1.0-2.0 bar
1 - 2 30 min. at60 °C
Technical InformationS 9.1
11/2016
Blending in on the adjacent panel with Glasurit® 90 LineBasecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: In principle, panel repairs with basecoat/clearcoat systems are possible, and therefore, generally, it is notnecessary to respray adjacent body parts. But when colour differences beyond allowable limits are to beexpected and when the areas to be resprayed are not limited by trim strips or edges, the more appropriatemethod to balance colour differences may be to blend in the damaged area and/or the adjacent part. Thisprocedure can be considerably more efficient and economical than time-consuming colour matching.
1. Pre-treatment of the adjacent panel700-1Glasurit® Cleaner
1 x wipe dry Foam padP1000-P2000
700-1Glasurit® Cleaner
1 x wipe dry
See the Glasurit RATIO System TDS or Repair System 4a for the preparation of the new panel / the panel tobe repaired.
2. Refinishing of the new panel / the panel to be repaired90 Line Glasurit®Basecoat
2:1*93- E3 or
93- E3slow
HVLP 1.3 mm 2.0 bar
1 thin coat flash offuntil matt
Note:Paint the new panel / the panel to be repaired up toabout 10 cm before the transition to the adjacent panel.
Technical InformationS 9.1
11/2016
Blending in on the adjacent panel with Glasurit® 90 LineBasecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
3. Refinishing of the transition area and the adjacent panel90-M50Glasurit®Blending Clear
2:193- E3 or
93- E3slow
HVLP 1.3 mm 2.0 bar
1
4. Refinishing of the transition between both panels90 Line Glasurit®Basecoat
2:1*93- E3 or
93- E3slow
HVLP 1.3 mm 1.5 bar
2fading outon bothpanels
Note:Apply two spraycoats without intermediateflash-off and with reduced spraying pressure.
5. Refinishing of the new panel / the panel to be repaired90 Line Glasurit®Basecoat
2:1*93- E3 or
93- E3slow
HVLP 1.3 mm 2.0 bar
1 fadingout
towardsthe edge
of thepanel
flash offuntil matt
Note:Apply a covering spraycoat, finishingjust before the edge of the adjacent panel.
Technical InformationS 9.1
11/2016
Blending in on the adjacent panel with Glasurit® 90 LineBasecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
6. Application of the coat to match the effect to the transition area and the adjacent panel90 Line Glasurit®Basecoat
2:1*93- E3 or
93- E3slow
HVLP 1.3 mm
0.8-1.5 bar
1/2 fadingout onboth
panels
Note:Apply the coat to match the effect withreduced spraying pressure.
7. Application of the coat to match the effect to the new panel / the panel to be repaired90 Line Glasurit®Basecoat
2:1*93- E3 or
93- E3slow
HVLP 1.3 mm 2.0 bar
1/2fading outinto the
surroundingarea
Note:Apply the coat to match the effectfading out to the adjacent panel.
8. Clearcoat application923-Glasurit® HSClear VOC
Referto the
technicaldata sheet
HVLP1.3 mm2.0 bar
1 1/2 - 2 30 min. at60 °C
Note:Apply the clearcoat. * in the case of silver colours, add another 10 - 20% of 93-E3 (18 - 22 s DIN 4)
Technical InformationS 9.2
01/2016
Blend-in Repair System90 Line Glasurit® Pearl Effect Basecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Translucent pearl effect finishes cannot be repaired by edge-to-edge panel refinishing because differentspraying techniques and film thicknesses give different effects. A successful repair requires large-scaleblending into the adjacent surfaces. To obtain a perfect result the refinisher has to use the same groundcoat colour and pearl effect basecoat that were used for the OE finish.Spot repairs on the panel being repaired do not give a satisfactory result. Always fade out on the adjacentpanel(s).
700-1Glasurit® Cleaner
1 x wipe dry
563-808Glasurit® FlattingPaste
563-808 +sanding
pad
700-1Glasurit® Cleaner
1 x wipe dry
Solid ColourGround Coat: 90Line Glasurit®Basecoat 2:1
93- E3HVLP
1.3 mm2.0-3.0 bar
2spraycoats
Mask adjacent surfaces.
Solid ColourGround Coat: 90Line Glasurit®Basecoat 2:1
93- E3HVLP
1.3 mm1.0-2.0 bar
1 fadingout onneigh-bouringpanel
flash offuntil matt
Technical InformationS 9.2
01/2016
Blend-in Repair System90 Line Glasurit® Pearl Effect Basecoat
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
90 Line Glasurit®Pearl EffectBasecoat
2:193- E3
HVLP1.3 mm
2.0-3.0 bar
1 flash offuntil matt
1 flash offuntil matt
1/2 flash offuntil matt
923-Glasurit® ClearVOC
Referto the
technicaldata sheet
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
30 min. at60 °C
Technical InformationS 9.5
01/2016
Glasurit® - Spot Repair Process
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: In principle, this process is designed for the repair of smaller scratches and small stone chip damages orother cosmetic damages. For maximum cost effectiveness, the repair size/area should be kept as smallas possible.
Cleaning /polishing
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Prepare thecar parts for
color retrievalby cleaning,
polishing andremoving small
scratches.
Standardpolish
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Preparation ofdamaged area
Sand spot withorbital sander (75mm) before body
filler or primerfiller application
P240- P400
700-1Glasurit® Cleaner
1 x wipe dry
Body filler
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 3-5 min. 20-30min. at20°C
P240- P400
Clean surfacewith 700-10
GlasuritDegreasing
and cleansingagent before
applying 285-270.
700-101x
wipe dry
Note: Use Glasurit 839-90 Body Filler for repairs on plastic parts.
Primer fillerapplication
285-270Glasurit® PrimerFiller Pro, grey
929-58Glasurit® HSFiller Hardener
352-50Glasurit®Reducer
4:1:1wet on wetadjustment
Mini HVLPspraygun
1.0 –1.2 mm1.0 –
1.5 bar
1/2 +1spraycoats30-40 µm
9 min.
Note: Alternatively: 285-230 / -290 Glasurit Primer Filler Pro, white / black. For plastic parts, add 522-10 Glasuritplastic additive.Alternatively: 183-70 / -90 Glasurit 1K Express Primer Filler, light grey / dark grey
Sanding ofprimer filler /fade-out area
Fine sandingwith orbital
sander (75 mm)P500 /
P1000
- P3000
700-11x
wipe dry
Basecoat(mixing ratio)
90 Line Glasurit®Basecoat
93-E3Glasurit®Adjusting base
2:1mixingstick
Technical InformationS 9.5
01/2016
Glasurit® - Spot Repair Process
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Blendingclear (mixingratio)
90-M50Glasurit®Blending Clear
93-E3Glasurit®Adjusting base
2:1mixingstick
Basecoat(mixture of 90Line and 90-M50)
90 Line Glasurit®Basecoat (readyfor use)
90-M50Glasurit®Blending Clear(ready for use) 2:1
mixingstick
Mini HVLPspraygun
1.0 –1.2 mm1.0 –
1.5 bar
Spraycoatsuntil
covered
flash offuntil mattbetween
spraycoatsand before
clear
Note: Apply and fade out 90 Line Glasurit Basecoat in thin, covering spraycoats.
Clear
923-610Glasurit® HSClear fast-dryingVOC
929-61Glasurit®Hardener VOCfast
523-15Glasurit® RacingAdditive
3:1:1mixingstick
Mini HVLPspraygun
1.0 –1.2 mm1.0 –
1.5 bar
1/2 +1 10 min.
or
10 min.at 60°C
Note: Alternatively: 923-135352-500Glasurit® Spot-Blender
Mini HVLPspraygun
1.0 –1.2 mm1.0 –
1.5 bar
Fade-out /polishing
area
8 min.
or
15 min.at 60°C
Note: Apply 352-500 Glasurit Spot Blender to the fade-out / polishing area to produce a smooth transition betweenthe refinish clearcoat and the old paintwork.
Polishing
Cool downbefore polishing
Polish the fade-out and the
complete repairarea with anappropriate
polishing system
Standardpolish
Technical InformationS 9.6
05/2019
Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Remarks: This system describes the Blending in on the adjacent panel with 90 Line tri-coat colors with translucentStep 2 ( like e. g. Mazda 41V / 46V or Renault NNP Rouge Flamme).With all translucent colors there is the need to verify the number of spray coats required for each colormatch and for each vehicle. Therefore, and due to differences in application techniques we recommend toapply different numbers of spray coats of Step 2 (translucent coat) on test panels coated with Step 1.This process provides paint material and time saving advantages:• Easier and safer blending process• Do not use Glasurit® Blending Clear 90-M50.Recommendation: Please check color and application first on test panels before applying to the vehicle.Please refer to the following Blending Process:
Properties: In principle, panel repairs with translucent 90 Line tri-coat colors are possible. But when color differencesbeyond allowable limits are to be expected, the more appropriate method to balance color differences maybe to blend into the damaged area and / or the adjacent panel, depending on the damage. This procedurecan be considerably more efficient and economical than time-consuming color matching.
Remarks: • Stick to the recommended flash-off times.• Flash off after each spray coat until the surface is completely mat.• Flash off times can be reduced by additional ventilation with blow equipment (e. g. Dry Jet).• Brief increase of temperature in combined spray booths or by intermediate drying at 40°C in the
oven after the final coat.• An increasing basecoat thickness needs more flash off time.
Final sanding of the filler surfacer with orbital sander, not coarser thanP500, and not finer than P1000.
1. Pre-treatment of the adjacent panel.700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry Foam pad
P1000-P1200
700-1Glasurit® Cleaner
1 x wipe dry
Mask the adjacent panel if necessary.
Technical InformationS 9.6
05/2019
Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
2. Refinishing of the new panel / the panel to be repaired (Step 1)90 Line Glasurit®Basecoat step 1
2:193- E3
HVLP1.3 mm2.0 bar
2 (sprayto cover)+ 1/2 tomatch
the effect
Notes:Demask the adjacent panel, after the last spray coat has dried.Using Step 1 fade out and overlap each spray coat into the adjacent panel.Keep the blend small and keep the edge transition soft and gradual.Maximum pressure 1.5 bar when blending out.Blending agent 90-M50 is not needed for this process.
2.1 Refinishing of the blend transition area into the adjacent panel Step 190 Line Glasurit®Basecoat step 1
2:193- E3
HVLP 1.3 mm
1.0 -1.5 bar
1 - 2fading outon bothpanels
1/2 tomatch
the effect
flash offuntil matt
Notes:Reduce spray gun pressure when blending.After Step 1 has dried, use tack rag on the blended panel to remove any loose over spray.
Technical InformationS 9.6
05/2019
Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
2.2 Refinishing of the transition area [optional]90-M5Glasurit® Tri-coat-Additive
2:193- E3
100 g90-M5(RFU)30 g
Step 1(RFU)
HVLP 1.3 mm
1.0 -1.5 bar
2 - 3 flash offuntil matt
Notes:For some colours it can be helpful to blend smoother intothe transition area. This optional step can be used for that.For a smoother transition, 2 -3 coats should be sprayed fromthe outside to the inside.Loose over spray should again be removed by a tack rag when dry.
3. Refinishing of the new panel / the panel to be repaired and of the adjacent panel Step 290 Line Glasurit®Basecoat step 2
2:193- E3
HVLP1.3 mm2.0 bar
2,0 baron the
repairedpanel; 1,5bar on theblendingin zone
1 - 2 + 1/2to matchthe effect
flash offuntil matt
Notes:Fade out and overlap each spray coat into the adjacent panel.Reduce pressure when blending into the adjacent panel.Apply the ½ coat to match the effect over the repaired area with reduced pressure of 1.5 bar.Apply staggered overlaps to produce consistent basecoat finish.
Technical InformationS 9.6
05/2019
Blending in on the adjacent panel with Glasurit® 90 Line tri-coat colors (translucent step 2)
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
4. Clearcoat application923-Glasurit® ClearVOC
Referto the
technicaldata sheet
HVLP1.3-1.4
mm2.0 bar
2spraycoats
30 min. at60 °C
Technical InformationS 10
11/2017
Refinishing with Low-Solvent ProductsGlasurit® VOC Refinishing Process
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Repair process that meets all current and future VOC laws and regulations. It is based on the "TechnologyGuidelines for Vehicle Refinishes" of CEPE (European Council of the Paint, Printing Ink and Artists' ColoursIndustry), with national legislation not being taken into account.
Cleaning
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Mechanicalde-rusting of
damaged areasP16-P150
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Body Filler(coarse +fine)
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
3-5 min. P80/P150coarsesanding
P240/P320 finesanding
700-1Glasurit® Cleaner
1 x wipe dry
Note: Clean the surface with Glasurit 700-10 Degreasing and cleaning agent before applying 285-270.
Primer Filler
285-270Glasurit® PrimerFiller Pro, grey
929-58Glasurit® HSFiller Hardener
352-Glasurit®Reducer
5:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
1/2 +1 35 min. at60 °C
P 800 P400- P500
or
Primer
283-150Glasurit® EtchPrimer Filler
352-230Glasurit®Activator
1:1mixingstick
HVLP1.3-1.8
mm2.0-3.0 bar
1 thin coat10-15 µm
10 min.at 20°C
Primer Filler
285-505, -555,-655Glasurit® HSPrimer Filler
929-55, -56Glasurit® HSPrimer Hardener
352-Glasurit®Reducer
4:1:1mixingstick
HVLP1.7-1.9
mm2.0-3.0 bar
2spraycoats
25 min. at60 °C
5-10 min. P400- P500
P 800
Alternative: 285-700, 285-790, 285-95 Glasurit® HS Primer Filler / Filler
Basecoat
90 Line Glasurit®Basecoat
93-E3Glasurit®Adjusting base
2:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2 + 1/2spraycoats
flash offuntil mattbetween
spraycoatsand before
clear
Technical InformationS 10
11/2017
Refinishing with Low-Solvent ProductsGlasurit® VOC Refinishing Process
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Clear
923-Glasurit® ClearVOC
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
Referto the
technicaldata sheet
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
Referto the
technicaldata sheet
or
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
30 min. at60 °C
or
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC MC600
929-61, -63, -64Glasurit®Hardener VOC
352-10, -30, -40Glasurit®Reducer
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
30 min. at60 °C
Technical InformationS 12
01/2015
Glasurit® Mat Clear System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Refinishing process for 90 Line basecoat/clearcoat systems with Glasurit 923-55 MS Clear extra mat andGlasurit 923-57 MS Clear mat elastified.
Substrates: Please see the Glasurit RATIO System TDS for the refinishing steps up to the application of 90 Line.Remarks: • Due to the different mixing ratio ratios of the clears to be used, you may achieve a gloss level between
12-65 units (at an angle of 60°). The gloss level may be higher for light and pure silver colours.Additionally, car bodies may show gloss level differences between vertically and horizontally coatedpanels. Therefore, we recommend to produce a spray-out sample before each refinishing job andto compare it with the area to be repaired.
• Stir the 923-55 and 923-57 clears well before use!• In order to avoid any gloss deviation when refinishing mat clearcoats, it is important
- to observe the recommended film thicknesses for basecoat and clearcoat- to apply staggered overlaps to produce consistent basecoat and clearcoat film thicknesses.- to allow the clear to flash off until completely mat after each spraycoat. (Generally, after the firstspraycoat 10-15 min and after the second spraycoat 15-20 min. That depends on air speed andspraybooth temperature.) Do not flash off for more than 25 min after each spraycoat.
• With mat surfaces it is not possible- to remove dust inclusions by polishing because polishing changes the gloss level. Therefore, it isvery important to work very carefully during cleaning and application.- to fade out the clear because the film thickness in the blending area varies, which changes thegloss level. Therefore, always apply the clear to the whole panel!
• Please also observe the technical product data sheets for Glasurit 923-55 MS Clear extra mat andGlasurit 923-57 MS Clear mat elastified.
Cleaning 700-11x
wipe dry P400- P500
700-11x
wipe dry
90 Line
90 Line Glasurit®Basecoat
93-E3Glasurit®Adjusting base
2:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2 + 1/210 -
15 µm
Flash offuntil mat
after eachspraycoat
Technical InformationS 12
01/2015
Glasurit® Mat Clear System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Option 1: Mix Glasurit 929-93 HS Topcoat Hardeners with Glasurit Clears:
Clear
923-55, -57Mixture:Glasurit® MSClear
929-93Glasurit® HSTopcoat Hardener
352-91Glasurit®Reducer normal
2:1+10%mixingstick
HVLP1.3 mm2.0 bar
240-50 µm
Flash offuntil mat
after eachspraycoat
30 min. at60 °C
Note: Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off at least 10 min, after the second spraycoat for at least 15 min.Do not flash off for more than 25 minutes after each spraycoat.
Mixing ratio: Mixing ratio of Glasurit clears to achieve a gloss level of 20-65 unitswhen using Glasurit 929-93 HS Topcoat Hardener
923-55 923-57 923-255Gloss level+/- 2
at an angle of 60° Mixing ration (% by weight):
20 100 - -25 60 40 -30 40 60 -40 20 80 -53 - 100 -65 - 75 25
Further treatment: Mat surfaces cannot be polished to remove dust inclusions.
Technical InformationS 12
01/2015
Glasurit® Mat Clear System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Option 2: Mix Glasurit 929-33 VOC Hardener with Glasurit Clears:
Clear
923-55, -57Mixture:Glasurit® MSClear
929-33Glasurit®Hardener VOC
352-91Glasurit®Reducer normal
100% byweight33% byweight17% byweight
HVLP1.3 mm2.0 bar
240-50 µm
Flash offuntil mat
after eachspraycoat
30 min. at60 °C
Note: Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for at least 10 min, after the second spraycoat for at least 15 min.Do not flash off for more than 25 minutes after each spraycoat.
Mixing ratio: Mixing ratio of Glasurit clears to achieve a gloss level of 12-65 unitswhen using Glasurit 929-33 VOC Hardener
923-55 923-57 923-335923-115923-35
Gloss level+/- 2
at an angle of 60°Mixing ratio (% by weight)
12 100 - -20 50 50 -25 30 70 -30 20 80 -40 - 100 -53 - 90 1065 - 75 25
Further treatment: Mat surfaces cannot be polished to remove dust inclusions.
Technical InformationS 12a
11/2018
Glasurit® Mat Clear System / modified
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Refinishing process for 90 Line basecoat/clearcoat systems with Glasurit 923-55 MS Clear extra mat andGlasurit 923-58 MS Clear mat elastified.
Substrates: Please see the Glasurit RATIO System TDS for the refinishing steps up to the application of 90 Line.Remarks: • Due to the different mixing ratio ratios of the clears to be used, you may achieve a gloss level between
12-65 units (at an angle of 60°). The gloss level may be higher for light and pure silver colours.• Additionally, car bodies may show gloss level differences between vertically and horizontally coated
panels. Therefore, we recommend to produce a spray-out sample before each refinishing job andto compare it with the area to be repaired.
• Stir the 923-55 and 923-58 clears well before use!• In order to avoid any gloss deviation when refinishing mat clearcoats, it is important
- to observe the recommended film thicknesses for basecoat and clearcoat- to apply staggered overlaps to produce consistent basecoat and clearcoat film thicknesses.- to allow the clear to flash off until completely mat after each spraycoat. (Generally, after the firstspraycoat 10-15 min and after the second spraycoat 15-20 min. That depends on air speed andspraybooth temperature.) Do not flash off for more than 25 min after each spraycoat.
• With mat surfaces it is not possible- to remove dust inclusions by polishing because polishing changes the gloss level. Therefore, it isvery important to work very carefully during cleaning and application.- to fade out the clear because the film thickness in the blending area varies, which changes thegloss level. Therefore, always apply the clear to the whole panel!
• Please also observe the technical product data sheets for Glasurit 923-55 MS Clear extra mat andGlasurit 923-58 MS Clear mat elastified.
Cleaning 700-11x
wipe dry P400- P500
700-11x
wipe dry
90 Line
90 Line Glasurit®Basecoat
93-E3Glasurit®Adjusting base
2:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2 + 1/210 -
15 µm
Flash offuntil mat
after eachspraycoat
Technical InformationS 12a
11/2018
Glasurit® Mat Clear System / modified
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Usage of 929-97 Glasurit Mat Clear System Hardener (Premix) in Glasurit clearcoats:
Clear
923-55, -58Mixture:Glasurit® MSClear
929-97Glasurit® MatClear SystemHardener(Premix)
2:1mixingstick
HVLP1.3 mm2.0 bar
240-50 µm
Flash offuntil mat
after eachspraycoat
30 min. at60 °C
Remark: Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for at least 10 min, after the second spraycoat for at least 15 min.Do not flash off for more than 25 minutes after each spraycoat.
Mixing ratio: Mixing ratio of Glasurit clears to achieve a gloss level of 12-65 unitswhen using 929-97 Glasurit Mat Clear System Hardener (Premix)
923-55 923-58Gloss level+/- 2at an angle of 60° Mixing ration (% by weight)
12 100 - 20 85 1525 75 2530 55 4540 40 6053 30 7065 100
Further treatment: Mat surfaces cannot be polished to remove dust inclusions.
Technical InformationS 13
11/2017
Glasurit® PRO Active repair process
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Repair process with Glasurit PRO Active Wipes.Substrates: Glasurit PRO Active Wipes are intended for use on bare metal surfaces like steel, galvanized steel and
aluminum. A wipe can be used several times for wiping a surface of up to 3 m² (moist and not severelycontaminated).
Cleaning
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Mechanicalde-rusting of
damaged areasP80 -P150
Body fillerapplication
P240/P320
Primerfiller
application
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Body Filler(coarse+ fine) (ifrequired)
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
3-5 min. P80/P150coarsesanding
P240/P320 finesanding
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Pretreatment
360-100Glasurit® PROActive Wipes
1xin crosscoats
Reaction timeat least 1
min at 20°Cflash off
until matt
Note: Used wipes can be reused during the same working day if they are still moist and clean. Application on baremetal surfaces only. Do not use on body filler patches or old paintwork.
Primer Filler
285-270Glasurit® PrimerFiller Pro, grey
929-58Glasurit® HSFiller Hardener
352-91Glasurit®Reducer normal
5:1:1mixingstick
HVLP1.7-1.9
mm2.0 bar
1/2 +1spraycoats50-70 µm
35 min. at60 °C
P400 -P1000
700-11x
wipe dry
Basecoat
90 Line Glasurit®Basecoat
93-E3Glasurit®Adjusting base
2:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2 + 1/2spraycoats
flash offuntil mattbetween
spraycoatsand before
clear
Clearcoat
923-Glasurit® ClearVOC
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
Referto the
technicaldata sheet
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
Referto the
technicaldata sheet
or Alternatively: 923-335
Technical InformationS 13
11/2017
Glasurit® PRO Active repair process
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC
929-Glasurit®Hardener VOC
352-Glasurit®Reducer
2:1+10%mixingstick
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
30 min. at60 °C
or
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC MC600
929-61, -63, -64Glasurit®Hardener VOC
352-10, -30, -40Glasurit®Reducer
3:1:1mixingstick
HVLP1.3 mm
2.0-3.0 bar
2spraycoats
30 min. at60 °C
Technical InformationS 15
09/2019
Paint system with 1K UV primer filler for repairs on plasticparts
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Highly efficient repair solution for small / medium damages on painted assembly plastic parts by using 1KUV-A technology primer filler. Lower energy consumption and shorter process times compared to existingrepair solutions. UV technology allows fast drying with nearly no impact on substrate temperature.Pure polypropylene (PP) and polyethylene (PE) cannot be painted. In order to guarantee paintability,modified plastic materials are used for vehicle parts that shall be painted. Although these plastic parts areoften labelled PP, the material is nevertheless paintable.
Cleaning
541-5Glasurit® Waxand SiliconeRemover 1 x damaged
area:P80-P600entire part:
sandingpad
541-30Glasurit®Universal cleanerfor plastics 1 x wipe dry 60 °C
1 hour1x
moistenedcloth
Fine BodyFiller
839-90Glasurit® PlasticBody Filler
948-36Glasurit®Hardener Paste
+ 3 % 25 - 35min. at20 °C
P80/P150coarsesanding
use guidecoat
P240/P320 finesanding
541-30Glasurit®Universal cleanerfor plastics
Primer
934-10Glasurit® 1KPlastic AdhesionPrimer 2 min. 1 thin coat
5-10 µm10 min.at 20°C
UV PrimerFiller
151-130, -170,-190Glasurit® UVPrimer filler 1.1
mm UV2.0 bar
1/2 20 sat 20°C
1 5 min.(UV-A >6 mW/cm²)
P400- P500
700-1Glasurit® Cleaner
1 x wipe dry
Note: Do not spray to cover, max. 80 µm. For good drying properties, respect the distance and heat-up time of thelamp and be aware of shadow edges.
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC
or 22 Line Glasurit®HS 2K TopcoatVOC MC600
or 90 Line Glasurit®Basecoat
923-Glasurit® HSClear VOC
Technical InformationS 15a
09/2019
Paint system with 1K UV primer filler for repairs on metalparts
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Properties: Highly efficient repair solution for small / medium damages on car panels by using 1K UV-A technologyprimer filler. Lower energy consumption and shorter process times compared to existing repair solutions.UV technology allows fast drying with nearly no impact on substrate temperature.
Cleaning
541-5Glasurit® Waxand SiliconeRemover 1 x wipe dry
Mechanicalde-rusting of
damaged areasP80-P150
700-10Glasurit®Degreasing andcleansing agent 1 x wipe dry
Body Filler(coarse +fine)
839-20 / 20KGlasurit® MultiPurpose BodyFiller
948-36Glasurit®Hardener Paste
+ 2-3% 20-30min. at20°C
3-5 min. P80/P150coarsesanding
P240/P320 finesanding
700-1Glasurit® Cleaner
1 x wipe dry
UV PrimerFiller
151-130, -170,-190Glasurit® UVPrimer filler 1.1
mm UV2.0 bar
1/2 20 sat 20°C
1 5 min.(UV-A >6 mW/cm²)
P400- P500
700-1Glasurit® Cleaner
1 x wipe dry
Note: Do not spray to cover. If higher film thicknesses are necessary, a second layer 151-130, -170, -190 UVPrimer filler can be applied with intermediate sanding after having dried the first layer, max. 120 µm. Forgood drying properties, respect the distance and heat-up time of the lamp and be aware of shadow edges.
Topcoat
22 Line Glasurit®HS 2K TopcoatVOC
or 22 Line Glasurit®HS 2K TopcoatVOC MC600
or 90 Line Glasurit®Basecoat
923-Glasurit® HSClear VOC
Technical InformationE 1
10/2011
Glasurit® Paint Mixing System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Mixing machines1. Mixing machines:The mixing machines are designed to hold basecoat/topcoat mixing and tinting bases at the same time.
All national regulations regarding explosion protection and the storage of flammable liquids must be observed.
2. Agitators:The agitators come as complete units that consist of the agitator, lid and driving mechanism. The height of theunits is already pre-adjusted.
Please remember to stir the paint in the open can thoroughly before attaching the agitator. Then place thecomplete agitator on the open mixing base can and fasten it by pressing and turning the clips. The unit is thenready for use.
3. OperationThe agitators should be run for approximately 10 minutes in the morning and evening.
Remark:
All nationally and/or locally applicable working directions, operating instructions and safety regulations as well as existingrules for the prevention of accidents and regulations on dangerous substances must be observed.
Technical InformationE 1
10/2011
Glasurit® Paint Mixing System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Mixing procedure1. General:Mixing bases must be stirred well before use. In order to obtain good mixing results, it is essential that themixing bases be in a homogeneous state.
The contents of new cans of mixing bases must therefore be stirred well before being placed in the mixingmachine, either by hand using a metal stick or with an electric/pneumatic stirrer. Then the agitator unit must beattached.
2. Determining the colour:Identify the colour of the vehicle to be refinished from the information given on the vehicle body itself or in thevehicle documents. With the help of the colour code, you will find the mixing formula on the respective colourmedia. Along with the standard colours, you will find the formulas of more colour variants. Furthermore, you mayalso use the Color Profi System to determine the corresponding CPS chip with the colour code. After havingchecked the corresponding CPS chip(s), you may then use the respective mixing formula to mix the colour.
Please note:
All details specified in the mixing formula must be strictly observed.3. Zeroing the scales:Place an empty can or mixing container on the weighing platform of the computer scales and zero the scales.
4. Weighing the amounts indicated:Since the mixing formulas give cumulative weights, it is not necessary to add up the individual amounts. Justadd each of the indicated mixing formula components until the scales show that the predetermined weight hasbeen reached, as given in the formula for the particular component concerned.
5. Stirring the mixture:After weighing has been completed, stir well with a mixing stick. For colour-related reasons, stirring should bedone from the edge of the can towards the centre, making sure that any paint clinging to the stick is carefullyscraped off into the can and stirred in. Before actually applying the paint mixed, you must make a spray-out (alsoapplying the clear when basecoat/clearcoat systems are concerned). Dry the spray-out and compare it with thevehicle to be refinished. If the colour does not match, adjust it by tinting or use a colour variant.
When using the Color Profi System, you seldom need a spray-out as the CPS chips are spray-outs themselves.
Technical InformationE 2
10/2011
Glasurit® RATIO Color System
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
The Glasurit RATIO Color System: The quick and easy way to find the matching colour.The identification of the matching colour is one of the decisive process steps in automotive refinishing. Speedand precision are essential because the human eye is very critical.
Only when there is no visible difference between the original finish and the repaired area, the repair job wasperformed professionally.
This is why the continuous improvement of colour identification tools is of central importance for Glasurit. Whatwe offer is a complete system of colour information and colour tools.
The modules of the system:
Color Profi Systems Metallic and Uni
Up-to-date Glasurit Color Profi Systems are the ideal tools for an exact colour match because the swatchesconsist of colour chips sprayed with original Glasurit paint, and updates are offered at regular intervals to includethe latest vehicle colours.
RATIO Scan II
Glasurit RATIO Scan II combines a high-quality colorimeter with an application that is perfectly integrated intothe Glasurit RATIO Color System. The mobile device measures the exact colour directly on the car body. Thenthe readings can easily be transferred to the computer where they are processed with Profit Manager or ProfitManager Pro.
Profit Manager Pro, Lite and starter
Integrated solution for colour search, weigh-in process, stock management, reporting and order management.The software helps bodyshops worldwide to simplify and accelerate their workflows. The functions for colourand material management allow the painter to determine the costs precisely. The Glasurit Profit Managerenables bodyshops to exactly control and manage all working steps concerning the paint process.
Color Online
The internet-based and daily updated colour database Color Online is a component of Glasurit RATIO ColorSystems and has been for years now a well-known and proven tool for quickly and effortlessly finding mixingformulas. On the website, bodyshops can find all the information they need to reliably determine colour variantsand mix them precisely.
Color Info
A helpful colour information system providing colour samples of the most important international carmanufacturers, including original body, bumper and side panel colours.
The colour swatches of the current edition show all the standard colours that have been used by vehiclemanufacturers since 1995. Of course there are also colours from older vehicles that were still in productionin 1995. Together with the extensive index cards for 1995 to 2001/2002, the system provides a completedocumentation of all the colours found on cars over the past years.
Technical InformationE 4
10/2011
Tips for colour matching
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Checking the colourTo do a good repair job, it is sometimes necessary to match the colour by tinting, blending in, or polishing the oldpaintwork. Therefore, careful comparison between the new paint and the original finish is essential. Any variation in colour must bemodified before application. The mixing formula shown on the microfiche can assist in this. You should use onlythe mixing bases contained in the mixing formula for tinting, or the reduced bases indicated in the tinting guide. An adequate colour comparison can only be carried out on a sprayed (not hand-painted) dry paint film (including the clear coatin the case of metallic finishes) and must be done in daylight, or under a daylight lamp. 22 Line HS 2K topcoat canbe compared already after a few minutes drying. With metallic colours, the spray-out (sample) as well as the actual spraying should be done by the same person.Due to weathering, age and washing, almost all paint finishes are subject to changes in appearance and colour.This is caused by the absorption of dirt or by external influences (temperature, humidity, UV radiation, acid rainetc.). These effects can in most cases be removed by polishing.Repairing basecoats is more difficult as the colour and the brightness of the metallic effect strongly depend onthe application method used. 1. On the diameter of the spray gun nozzle and the spraying pressure.With a small nozzle and high spraying pressure, the atomisation is finer. This produces a lighter colour. 2. On the reducer and the spraying viscosity.With a rather fast reducer, the silver effect achieved is usually more brilliant than that obtained with a rather slowreducer. The higher the viscosity, the coarser the spray pattern, which increases the risk of clouding. 3. On the spraying method.When you spray rather dry, or apply a dust coat, this makes the colour lighter and more metallic. When youspray rather wet, the colour appears fuller and darker. Within these variants, you find the full range of nuancesas regards metallic effect and colour. 4. On the distance of the spray gun from the object to be painted.A short distance between the spray gun and the object being painted produces a rather wet film and a ratherdark and chromatic shade. A wider distance results in a drier film and a lighter and more metallic colour. Colour alterationsIt may happen that OEM colours are slightly altered for technical or styling reasons, without the colour code and/or name being changed. Furthermore, production-related colour fluctuations can occur (for example with paintsfrom different production plants or of different quality etc.).
Technical InformationE 4
10/2011
Tips for colour matching
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Notes on (mixing formulas of) colour variantsThe table below provides an outline of how the mixing formulas of (darker, lighter, bluer, redder etc.) colourvariants or (coarser, finer) effect variants are marked.
Mark Characteristic/ 20 coarser/ 30 finer/ 40 darker/50 bluer/60 yellower/70 greener/80 redder/90 lighter/0A less chromatic, dirtier/0B purer
You will also find mixing formulas with combined variant marks such as:
/ 48 darker and redder/7B greener and purer/62 yellower and coarser
Technical InformationE 4
10/2011
Tips for colour matching
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Tinting Guide Glasurit® 22 Line HS 2K Topcoat
Colour Group more violett bluer greener yellower more orange redderwhite A 131 A 168 A 105 A 172 M 6
grey A 127 M 31
M 52
M 63
M 68
M 96
M 5 M 43
M 40 M146
M 38
M 201
M 6
violett M 31
M 52
A 346
M 55
blue A 127 M 68
M 96
M 5 M 40
M 43 M 77
M 146
M 6
M 55
green M 52
M 63
M 5 M 40
M 43 M 77
M 146
M 201
yellow A 131 A 168 A 172
M 201
M 6
beige M 30 A 131 A 168 M 5 M 40
M 43 M 77
M 146
A 172
M 38
M 201
M 6
orange M 5 M 40
M 43 M 77
M 146
A 346
M 6
M 326
bordeaux A 127
M 30
M 31 M 5
M 39
M 43
M 38
M 201
A 346
M 6
M 326
red M 30 A 131 M 5 M 40
M 43 M 77
M 146
M 38
M 201
lighter dirtierPlease use white bases only Please use black bases only
* Please use the bases from the corresponding mixing formula
Technical InformationE 4
10/2011
Tips for colour matching
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Tinting Guide Glasurit® 90 Line Basecoat
Colour
Group
more violett bluer greener yellower more orange redder darker
violett A 531
A 589
A 531
A 589
A 352 A 352
A 359
A 427
A 430
A 359
A 430
silver A 427 A 359 A 503
A 531
A 563
A 589
A 503
A 531
A 563
A 589
A 696 A 640 A 136
A 335
A 105
A 148
A 329
A 372 A 201 A 347
A 378
A 352
A 306
A 347
A 378
A 352
A 926
A 997
A 926
A 997
blue A 427
A 430
A 359
A 430
A 696 A 640 A 136
A 329
A 105
A 148
A 329
A 347 A 306
A 347
A 503
A 531
A 563
A 589
A 503
A 531
A 563
A 589
green A 503
A 563
A 589
A 503
A 563
A 589
A 136
A 143
M 115
A 105
A 143
A 148
A 115
A 329 A 306
A 329
A 696 A 640
yellow A 696
A 115
A 640
A 115
A 372 A 201 A 372 A 306
A 323
A 136
A 143
A 143
orange A 136
A 143
A 105
A 143
A 347
A 378
A 352
A 323
A 347
A 378
A 352
A 372 A 201
A 306
bordeaux A 696 A 640 A 136
A 143
A 329
A 105
A 143
A 329
A 148
A 372 A 201
A 306
A 347 A 323
A 347
A 926
A 997
A 926
A 997
red A 430 A 359
A 430
A 136
A 143
A 329
A 105
A 143
A 329
A 378
A 372
A 201
A 378
A 347
A 352
A 347
A 352
lighter dirtierface view Please use aluminiums only. Please use black bases onlyside view Please use white bases only Please use black bases only
* Please use the bases from the corresponding mixing formula.
Technical InformationF 1
11/2017
Product list
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Body Fillers BF Hardeners Reducers
Glasurit® Multi Purpose Body Filler 839-20/20K 948-36948-52
Glasurit® Fine Body Filler 839-25 948-36
Glasurit® Soft-Body Filler 839-55 948-36948-52
Glasurit® Universal Body Filler 839-70/70K 948-36948-52
Glasurit® Multi Brushing Body Filler 839-85 948-36 max. 4% 352-10, -50
Glasurit® Plastic Body Filler 839-90 948-36
Glasurit® Glass fibre body filler 901-21 948-36
Glasurit® UP-Spray Filler grey 1006-26 948-22
Primers P Hardeners Reducers
Glasurit® 1K Anti-corrosive Primer 183-30
Glasurit® Etch Primer Filler 283-150 352-230
Glasurit® 2K SF Primer 285-26 929-26 352-50352-91
352-216
Glasurit® 1K Plastic Adhesion Primer 934-10
Technical InformationF 1
11/2017
Product list
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primer Fillers PF Hardeners Reducers
Glasurit® UV Primer filler grey 151-170
Glasurit® 1K Primer Filler 176-72 93 E3
Glasurit® 1K Express Primer Fillerlight grey
183-70
Glasurit® Etch Primer Filler 283-150 352-228 352-50352-91
Glasurit® Primer Filler Pro, white 285-230 929-58 352-50352-91
352-216
Glasurit® Primer Filler Pro, grey 285-270 929-58 352-50352-91
352-216
Glasurit® Primer Filler Pro, black 285-290 929-58 352-50352-91
352-216
Glasurit® HS Primer Filler, grey 285-505 929-55929-56
352-50352-91
352-216
Glasurit® HS Primer Filler, black 285-555 929-55929-56
352-50352-91
352-216
Glasurit® HS Primer Filler, white 285-655 929-55929-56
352-50352-91
352-216
Glasurit® Primer Filler 285-700 929-55929-56
352-50352-91
352-216
Glasurit® Primer Filler, white 285-730 929-55929-56
352-50352-91
352-216
Glasurit® Primer Filler, black 285-790 929-55929-56
352-50352-91
352-216
Technical InformationF 1
11/2017
Product list
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Primer Fillers PF Hardeners Reducers
Glasurit® Epoxy Primer Filler grey 801-72 965-60 352-91352-216
Glasurit® 2K Plastic Primer Filler 934-70 929-56 352-50352-91
Fillers and Surfacers F Hardeners Reducers
Glasurit® HS Transparent Sealer 285-0 929-55929-56
352-50352-91
352-216
Glasurit® HS VOC Non-SandingFiller, light grey
285-31 929-55929-56
352-91352-216
Glasurit® HS VOC Non-SandingFiller, white
285-38 929-55929-56
352-91352-216
Glasurit® HS VOC Non-SandingFiller, black
285-49 929-55929-56
352-91352-216
Glasurit® HS VOC Tintable Filler,transparent
285-95 929-55929-56
352-50352-91
352-216
Topcoats T Hardeners Reducers
22 Line Glasurit® HS 2K TopcoatVOC
22- VOC 929-31929-33929-34
352-50352-91
352-216
22 Line Glasurit® HS 2K TopcoatVOC MC600
22- VOC MC600 929-61929-63929-64
352-10352-30352-50
90 Line Glasurit® Basecoat 90- 93-E3
Glasurit® Basecoat 90- LimitedEdition 90- Magic Collection
90- 93-E3
Glasurit® 90 Interior Color SystemMetallics/Solids/Pearl Effects
90-IC 440 93-IC 330 352-50352-91
352-216
Technical InformationF 1
11/2017
Product list
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Clears C Hardeners Reducers
Glasurit® HS Clear VOC 923-35 929-31929-33929-34
352-91352-216
Glasurit® HS Clear scratch resistantVOC
923-45 929-31929-33929-34
352-91352-216
Glasurit® MS Extra Matt Clear 923-55 929-31 929-91929-33 929-93929-34 929-97
352-91
Glasurit® MS Clear matt Flexible 923-58 929-31 929-91929-33 929-93929-34 929-94
929-97
352-91
Glasurit® HS Universal Clear VOC 923-115 929-31929-33929-34
352-91352-216
Glasurit® HS Racing Clear VOC 923-135 929-31929-33
352-50352-91
352-216
Glasurit® HS Multi Clear VOC 923-335 929-31929-33929-34
352-91352-216
Glasurit® HS Clear scratch-resistantVOC
923-447 929-31929-33929-34
352-91352-216
Glasurit® HS Clear fast-drying VOC 923-610 929-61929-63929-64
352-10352-30352-40
Glasurit® HS Clear universal VOC 923-625 929-61929-63929-64
352-10352-30352-40
Glasurit® HS Clear superior glossVOC
923-630 929-61929-63929-64
352-10352-30352-40
Glasurit® HS Clear scratch-resistantVOC
923-645 929-61929-63929-64
352-10352-30352-40
Technical InformationF 1
11/2017
Product list
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Miscellaneous X Hardeners Reducers
Glasurit® Tri-coat Additive 90-M5 93-E3 93-E3 lang
Glasurit® Blending Clear 90-M50 93-E3 93-E3 lang
Glasurit® Guide Coat black 581-90
Glasurit® Cleaner 700-1
Glasurit® Degreasing and cleansingagent
700-10
Glasurit® Coagulating powder 700-7
Glasurit® Stone chip and underbodyprotection
1109- 90-VE
Glasurit® Blend-in Reducer 352-450
Glasurit® Spot-Blender 352-500
Glasurit® Spot-Blender - aerosol can 352-500 AE
Technical InformationF 1
11/2017
Product list
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Additives Z Hardeners Reducers
Glasurit® plastic additive 522-10
Glasurit® Brush- and Roll Additive 522-78
Glasurit® Soft face Additive 522-111
Glasurit® HS Flexible Matting agent 522-322
Glasurit® Texture additive Fine 522-345
Glasurit® Racing Additive 523-15
Glasurit® Anti-silicone additive 580-100
Glasurit® Hardener 929-
Glasurit® HS Topcoat Hardener / HSFiller Hardener
929- HS
Glasurit® Hardener VOC 929- VOC
Technical InformationF 2
11/2017
Temperature tableWhich hardeners and which reducers should be used in 2K PU topcoat and inclears?
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
The material combination (hardener and reducer) may be changed depending on temperature and object size.The hardeners and reducers recommended below for the various temperature ranges are for overall resprays.For panel repairs, select the material combination indicated for the next lower temperature range.
Please also respect the latest technical information sheets! Glasurit® 923-625, -630, -645 Glasurit® 923-610 3:1:1 3:1:1Spray viscosity DIN 4 / 20°C 18 - 21 s 18 - 21 sfrom 15°C 929-61
352-10
352-30
929-61
352-10
from 20°C 929-63
352-30
352-40
929-61
352-10
352-30
from 25°C 929-63
352-40
929-61
352-30
from 30°C 929-64
352-40
929-63
352-40
Technical InformationF 3
11/2013
Survey of processing pictographs
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Technical Information Pre-treatment
see data sheet cleaning
Mixing
mixing ratio 1:1for 2 components
mixing ratiofor 2 components
mixing ratiofor 3 components
use mixing stick hardener addition
Shake Spraycansbefore use
Viscosity adjustment
applicationviscosity
Application
gravity gun number of spraycoats
Technical InformationF 3
11/2013
Survey of processing pictographs
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
body-filling brushing roller coating aerosol
Drying
flash off drying time infrared ultraviolet
Sanding
manualsanding wet
manualsanding dry
random orbitalsander / wet(pneumatic)
random orbitalsander / dry(pneumatic)
polishing
Color
mixing stirring inmixing machine
color checking hang-on part blending in
limited hidingpower
mixing formulabeing revised
mixing formulabeing revised
overall respray immiscible
Technical InformationF 3
11/2013
Survey of processing pictographs
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
variants This color containsa Special Product.It can be ordered
from your distributor.
Special mixingcolor.This color can
be ordered fromyour distributor
color for interior color for enginecompartment /
boot
color for wheelrim and hubcap
formula usesmixing base thatis being phased
out
Multi-tone colorcombination
Mixing formulacontains lead
Textured color Mat color Clear coat
1-coat solid fullgloss color orbase coat for
multilayer color
Tinted clear Ground coat Three stagepainting (multi-
coat)
Paint system
Color for accent Color for stripe color for roof color foraccessories
Technical InformationF 3
11/2013
Survey of processing pictographs
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Storage
protect from frost store in a cool place protect from humidity carefully sealcontainer
shelf life
Technical InformationF 4
11/2017
Infrared dryingList of products with infrared drying parameters
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Glasurit® body fillers Duration Increase temperature by Max. surface temperature
839- Glasurit® Body Fillers 4 min 20°C / min 80°C
839-85 Glasurit® Multi BrushingBody Filler
10 min 20°C / min 90°C
1006-26 Glasurit® UP-Spray Fillergrey
10 min 20°C / min 90°C
Glasurit® primers Duration Increase temperature by Max. surface temperature
285-26 Glasurit® 2K SF Primer 3 min8 min
15°C / min20°C / min
65°C100°C
Glasurit® primerfillers / fillers
Duration Increase temperature by Max. surface temperature
176-72 Glasurit® 1K Primer Filler 3 min5 min
20°C / min20°C / min
65°C100°C
285- Glasurit® Primer Fillers 4 min5 min
15°C / min20°C / min
60°C80°C
285-230 Glasurit® PrimerFiller Pro, whiteFilm thickness 50 - 120 µm
4 min5 - 11 min
15°C / min20°C / min
60°C80°C
285-270 Glasurit® PrimerFiller Pro, greyFilm thickness 50 - 120 µm
4 min5 - 11 min
15°C / min20°C / min
60°C80°C
285-290 Glasurit® PrimerFiller Pro, blackFilm thickness 50 - 120 µm
4 min5 - 11 min
15°C / min20°C / min
60°C80°C
285-505 with 523-15 4 min 20°C / min 80°C
285-555 with 523-15 4 min 20°C / min 80°C
285-655 with 523-15 4 min 20°C / min 80°C
801- Epoxy Primer Fillers 4 min5 min
15°C / min20°C / min
60°C80°C
Technical InformationF 4
11/2017
Infrared dryingList of products with infrared drying parameters
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Glasurit® topcoat /basecoat / clear
Duration Increase temperature by Max. surface temperature
22- VOC 22 Line Glasurit® HS 2KTopcoat VOC
4 min4 min
15°C / min20°C / min
60°C90°C
22- VOCMC600
22 Line Glasurit® HS 2KTopcoat VOC MC600
4 min4 min
15°C / min20°C / min
60°C90°C
90- 90 Line Glasurit® Basecoat 4 min 15°C / min 60°C
923- Glasurit® Standard Clear 4 min4 min
15°C / min20°C / min
60°C90°C
Glasurit® topcoat /basecoat / clear
Duration Increase temperature by Max. surface temperature
923-610 Glasurit® HS Clear fast-drying VOC
10 min 25°C / min 70°C
923-625 Glasurit® HS Clearuniversal VOC
10 min 15°C / min 100°C
923-630 Glasurit® HS Clear superiorgloss VOC
10 min 25°C / min 115°C
Technical InformationF 5
10/2011
Advice on the use of HVLP sprayguns
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
FundamentalsHVLP is short for high volume low pressure. The limit values for some technical properties of HVLP spraygunswere fixed as follows based on the applicable regulations:
a.) transfer efficiency > 65%
b.) pressure at air cap/nozzle < 0.7 bar
Standard HVLP guns are designed for an air cap/nozzle pressure of 0.7 bar because the transfer efficiencylargely depends on the user.
AdvantagesDepending on the Glasurit® product used, application with an HVLP spraygun can help reduce product usageby 10 to 30%.
Instructions for use1. Viscosity setting Same as for conventional sprayguns.
Be sure to maintain a material temperature of about18-22°C.
2. Paint feed Must be adjusted individually at the spraygundepending on gun-to-object distance and workingspeed.
3. Air connectors Air hose diameter: 9 mm
Connections,couplings, nipples: 9 mm4. Air pressure setting As recommended by the gun manufacturer.5. Distance to object 10-15 cm6. Working speed Depending on:
(a) paint feed
(b) distance7. Spraying angle 90 degrees to the object being painted.8. Overlaps Spray overlaps for flow and in a staggered way.
Technical InformationF 5
10/2011
Advice on the use of HVLP sprayguns
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Possible operating defects – cause and corrective actions Optimum spray pattern
In order to achieve an even spray pattern, make surethat all bore holes are absolutely clean. It may impairthe spray jet if you use objects for cleaning that aretoo hard.It may impair the spray jet if you use objectsfor cleaning that are too hard. An imprecisely centredneedle will also lead to an uneven spray pattern.
Sickle-shaped spray pattern Cause:
The full compressed air jet of a clean horn borepresses the flat jet to the clogged sides.
Pearl-like or oval spray pattern Cause:
Contamination of spray nozzle or air outlet.
Turn the air nozzle by 180 degrees. Clean the air capand the nozzle if the uneven spray pattern remainsunchanged. Clean the air cap if the spray defect keepsmoving around.
Technical InformationF 5
10/2011
Advice on the use of HVLP sprayguns
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Split spray pattern (resembling a swallow’s tail) Possible causes:
1. atomising pressure is too high
2. product is too thin
3. product feed is insufficient
Correct the defects by adjusting the air volume.
Jet flutters Possible causes:
1. product feed is insufficient
2. paint nozzle is not tight
3. paint nozzle seating is damaged at the paint nozzleor inside the nozzle set
Product bubbles or boils in the cup Cause: The atomising air gets into the cup via the paint
channel. The paint nozzle is not tight enough. The airnozzle was not fastened completely. Tighten, clean orreplace parts accordingly.
Technical Information839-20/20K
05/2014
Glasurit® Multi Purpose Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Coarse and fine body fillerProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,
easy to sand, good adhesionRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).
• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.
Application 839-20 Coarse and fine body filler 829-20K Coarse and fine body filler
Paint system RATIO Aqua, RATIO HS
Mixing ratio 100% by weight 839-20 (can) 100% by weight 839-20K (cartridge)
Hardener 2-3% by weight 948-36 3% by weight 948-52 (depending on hardenercartridge)
Reducer
Potlife at 20 °C 4 - 5 min. 4 - 5 min.
Drying at 20 °CDrying at 60 °C
20 - 30 min. 20 - 30 min.
Infrared (short wave)Infrared (medium wave)
4 min.5 - 10 min.
4 min.5 - 10 min.
Sanding: orbital sander P80/150581-90 Guide CoatP240 body-filled area and old paintwork
P80/150581-90 Guide CoatP240 body-filled area and old paintwork
Technical Information839-25
10/2011
Glasurit® Fine Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Fine body fillerProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,
easy to sand, good adhesionEspecially designed for use as a second body filling coat on Glasurit 839- knifing fillers to obtain anabsolutely pore-free repair area.For small damaged spots to be repaired in one working step.
Remarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.
Application 839-25 Fine body filler
Paint system RATIO Aqua , RATIO HS
Mixing ratio 100% by weight 839-25
Hardener 2-3% by weight 948-36
Reducer
Potlife at 20 °C 4 - 5 min.
Drying at 20 °CDrying at 60 °C
20 - 30 min.
Infrared (short wave)Infrared (medium wave)
4 min.5 - 10 min.
Sanding: orbital sander P150581-90 Guide CoatP240 body-filled area and old paintwork
Technical Information839-55
03/2014
Glasurit® Soft-Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: levelling of dents, fast drying, easy to sandProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,
easy to sand.Remarks: • Mix body filler and hardener paste well (no marble effect). Do not exceed 3% of hardener (excess
peroxide will cause discoloration in the finish).
Application 839-55 Soft-body filler
Paint system
Mixing ratio 100% by weight 839-55
Hardener 3% by weight 948-36
Reducer
Potlife at 20 °C 5 min.
Drying at 20 °CDrying at 60 °C
15 min.
Infrared (short wave)Infrared (medium wave)
4 min.5 - 10 min.
Sanding: orbital sander P80 / P150 / P240
Technical Information839-70/70K
10/2011
Glasurit® Universal Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Coarse and fine body fillerProperties: High solids content; universally suitable for use on steel sheet, galvanised steel, aluminium; fast drying,
easy to sand, good adhesionRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).
• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.
Application 839-70 Coarse and fine body filler 839-70K Coarse and fine body filler
Paint system
Mixing ratio 100% by weight 839-70 (can) 100% by weight 839-70K (cartridge)
Hardener 2-3% by weight 948-36 948-52 addition of hardener depending onhardener cartridge
Reducer
Potlife at 20 °C 4 - 5 min. 4 - 5 min.
Drying at 20 °CDrying at 60 °C
20 - 30 min. 20 - 30 min.
Infrared (short wave)Infrared (medium wave)
4 in.5 - 10 min.
4 min.5 - 10 min.
Sanding: orbital sander P80/150581-90 Guide CoatP240 body-filled area and old paintwork
P80/150581-90 Guide CoatP240 body-filled area and old paintwork
Technical Information839-85
07/2015
Glasurit® Multi Brushing Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Coarse and fine body filler applied by brushingModelling of profiles and contoursMay also be used as fast polyester spray fillerUniversally applicable for use on steel, galvanised steel and aluminium without primer
Properties: High solids content, fast drying, easy to sandRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).
• Mix in plastic cup, apply with flat brush.• Clean with 352-10, -50 after use.• Do not apply more than 400 microns per coat; do not add more than 3% of hardener. Excess peroxide
will cause discoloration in the finish.• On poorly cured old paintwork and e-coated OEM parts, sand large area around damaged spots
down to the bare metal. Apply body filler to bare metal only.• Do not use brushing body filler on acid-treated surfaces or on surfaces primed with acid-catalysed
products (etch primers).
Technical Information839-85
07/2015
Glasurit® Multi Brushing Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Brushing process Spraying process
Paint system
Mixing ratio 100% 839-85 100 % 839-85
Hardener 2-3 % 948-36 2-3 % 948-36
Reducer max. 4% 352-10, -50, if required max. 4% 352-10, -50
Potlife at 20 °C 5 min. 5 min.
Brushing 2-3 times
Gravity cupSpraying pressure
2 - 3 mm 2-3 bar (30-45 p.s.i.)
Drying at 20 °CDrying at 60 °C
30 min. 30 min.
Infrared (short wave)Infrared (medium wave)
5 – 7 min. 10 – 15 min.
5 – 7 min. 10 – 15 min.
Sanding: orbital sander P80581-90 Guide CoatP150 / P240
P80581-90 Guide CoatP150 / P240
Technical Information839-88
05/2014
Glasurit® Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Coarse and fine body fillerProperties: High solids content; universally suitable for refinishing: steel sheet, galvanised steel, aluminium; fast drying;
easy to sand; good adhesionRemarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).
• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.
Application Coarse and fine body filler 839-88
Paint system
Mixing ratio 100% by weight 839-88
Hardener 2 - 3% by weight 948-88
Reducer
Potlife at 20 °C 4 - 5 min.
Drying at 20 °CDrying at 60 °C
20 - 30 min.
Infrared (short wave)Infrared (medium wave)
4 min.5 - 10 min.
Sanding: orbital sander P80/150581-90 Guide CoatP240 for body-filled area and old paintwork
Technical Information839-90
10/2011
Glasurit® Plastic Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Flexible fine body filler for application to paintable plastics on cars, to cover smaller damages (scratches).Properties: Flexible, high solids content; universally suitable for use on all paintable plastics on cars, fast drying, easy
to sand, good adhesion.Remarks: • Mix body filler and red hardener paste well before use (homogeneous colour, no marble effect).
• Do not exceed 3% of hardener.• Excess peroxide will cause discoloration in the finish.
Application 839-90 fine body filler
Paint system S 3, S 3a
Mixing ratio 100% by weight 839-90
Hardener 2-3% by weight 948-36
Reducer
Potlife at 20 °C 4 - 5 min.
Drying at 20 °CDrying at 60 °C
25 – 35 min. 15 min.
Infrared (short wave)Infrared (medium wave)
8 min. 5 – 10 min.
Sanding: orbital sander P80/150581-90 Guide CoatP240/P320 body-filled area and old paintwork
Technical Information839-171
11/2019
Glasurit® UV Body Filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)239: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 239 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Fine body fillerProperties: Universally applicable on steel, galvanised steel, aluminium, e-coated parts, old paintwork, and all coatable
plastic add-on parts.The high solids fine body filler convinces with fast drying ability, excellent sandability and good anti-corrosiveproperties. They are coupled with good finish qualities.Especially developed for the repair of small damages and scratches, to achieve a repaired surface withoutpores.
Remarks: • do not use in direct sunlight• do not expose to sunlight on storage
Application Fine body filler
Paint system S 3, S 3a, S 9.5, S 15, S15a
Mixing ratio The material is ready for use.
Film thickness max. 800 µm
UV drying 5 min. (UV-A -> min. 6 mW/cm²)By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.
Sanding: orbital sander P80/150581-90 guide coatP240/320 putty area and old paintwork
Technical Information901-21
10/2011
Glasurit® Glass fibre body filler G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)180: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Glass-fibre reinforced, tough and resilient polyester body filler for smaller areas rusted throughProperties: Repair of damaged GRP parts
Paint system
Mixing ratio 100 % 901-21
Hardener 2 –3 % 948-36
Reducer
Potlife at 20 °C 5 min.
Drying at 20 °CDrying at 60 °C
20 min.
Infrared (short wave)Infrared (medium wave)
4 min.5 - 10 min.
Sanding: orbital sander P 80 / P 150
Technical Information1006-26
08/2016
Glasurit® UP-Spray Filler grey G / BF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(b)(250)249: The EU limit value for this product ( product category: IIB.b ) in ready to use form is max 250 g/litre of VOC. The VOC content ofthis product is 249 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Fine body filler applied by sprayingProperties: High build, very safe to spray, can be sprayed in thick coatsRemarks: • Shelf life: 8 months (at 20°C)
• Do not wet sand 1006-26• Prime sand-throughs and bare metal with Glasurit 2K SF Primer 285-26• Do not apply on etch primer filler/wash primer (e.g. 283-150) or on substrates pre-treated with acid• Store in a cool place
Paint system S 1
Mixing ratio 1.4 kg 1006-26
Hardener 50 cc 948-2275 cc 948-22 below 15°C
Reducer max. 4% 352-10, -50, if required
Spray viscosityDIN 4 at 20°C
as supplied Potlife at 20°C: 25 – 30 min.
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:2.5 – 3.0 mm 2.5 – 3.0 bar
3 – 5 Film thickness: 200 – 300 µmNumber of spraycoats If a film thickness of > 300 µm is required, a second spray body filler layer can be applied without
intermediate sanding after having dried the first layer.
Drying at 20 °CDrying at 60 °C
3 – 4 h30 min.
Infrared (short wave)Infrared (medium wave)
10 min.15 – 20 min.
Sanding: orbital sander P150 pre-sanding581-90 Guide CoatP240 fine sanding
Technical Information183-30
08/2019
Glasurit® 1K Anti-corrosive Primer G / P
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)685: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 685 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer for automotive refinishingProperties: 1-pack primer supplied in an aerosol can
• Very good corrosion protection on steel, galvanised steel and aluminium• Weldable
Application Primer
Paint system
Spreading rate:
Shaking 2 min.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats 1 - 2
Film thickness 15-20 microns
Flash-off at 20°C approx. 10 min.
Technical Information283-150
12/2016
Glasurit® Etch Primer Filler G / P
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)760: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOCcontent of this product is 760 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: PrimerProperties: Very good anti-corrosive propertiesRemarks: For steel, aluminium and galvanised steel.
Do not recoat with polyester body filler!Do not use under 176-72!Can be used as primer with 352-228 Glasurit Activator, too. See Technical Information 283-150 inchapter G / PF.Not recoatable with 90 Line!
Application Primer
Mixing ratio 1 : 1100% by vol. 283-150
Hardener 100% by vol. 352-230
Reducer
Potlife at 20 °C 7 days
Spray viscosityDIN 4 at 20°C
15 s
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 - 1.8 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.8 mm 2.0 bar
Number of spraycoats 1-2
Film thickness 10-15 µm
Flash-off at 20°C ca. 10 min.
Technical Information285-26
02/2016
Glasurit® 2K SF Primer G / P
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)520: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 520 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer for application under 1006-26.Properties: • Very good anti-corrosive properties
• Isolating primerRemarks: For steel, aluminium and galvanised steel.
Application Primer
Paint system S 1
Spreading rate: 400 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100% by vol.
285-26
Hardener 25% by vol. 929-26
Reducer 25% by vol. 352-50 /-91 /-216352-10/ -30/ -40
Spray viscosityDIN 4 at 20°C
18 – 22 s Potlife at 20°C: 3,5 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm 2.0 bar
Number of spraycoats 1
Film thickness 20 – 25 µm
Drying at 60 °C 20 min.
Infrared (short wave) 11 min.
Technical Information934-10
08/2019
Glasurit® 1K Plastic Adhesion Primer G / P
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)688: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 688 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Adhesion primer for plastic partsProperties: Multi-purpose adhesion promoter supplied in an aerosol can, suitable for all paintable plastics on cars.
• Suitable filler surfacers: Glasurit® 285-* HS fillers / primer fillers*= Add Softface according to system S.3a
• GRP parts: no 934-10 required.
Application Primer
Paint system S 3a
Spreading rate:
Shaking 2 min.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats 1 - 2
Film thickness 5-10 microns
Flash-off at 20°C approx. 15 min.
Technical Information151-130
09/2019
Glasurit® UV Primer filler, light grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)540: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 540 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.
If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.
Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.
Mixing ratio Material is ready for use.
Shaking Shake vigorously for 1 - 2 min. before use.
Spray viscosityDIN 4 at 20°C
18 - 20 s
Gravity cupSpraying pressure
HVLP gravity-feed spray gun 1.1 mm0.7 bar at the nozzle
Compliant gravity-feed spraygun:1.1 mm, 2.0 bar
Number of spraycoats Primer surfacer formetal:½ + 1
Film thickness:max. 120 µm
Primer surfacer forplastic:½ + 1
Film thickness:max. 80 µm
Flash-off at 20°C 20 s between spray coatsIf higher film builds on metallic substrates are necessary, a second layer 151-130 can be appliedwith intermediate sanding after having dried the first layer.151-130 appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.
UV drying (UV-A > 6 mW/cm²)
5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.
Sanding: wet P800
Sanding: orbital sander P400 - P500
Technical Information151-170
08/2018
Glasurit® UV Primer filler grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)540: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 540 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.
If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.
Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.
Mixing ratio Material is ready for use.
Shaking Shake vigorously for 1 - 2 min. before use.
Spray viscosityDIN 4 at 20°C
18 - 20 s
Gravity cupSpraying pressure
HVLP gravity-feed spray gun 1.1 mm0.7 bar at the nozzle
Compliant gravity-feed spraygun:1.1 mm, 2.0 bar
Number of spraycoats Primer surfacer formetal:½ + 1
Film thickness:max. 120 µm
Primer surfacer forplastic:½ + 1
Film thickness:max. 80 µm
Flash-off at 20°C 20 s between spray coatsIf higher film builds are necessary, a second layer 151-170 can be applied with intermediatesanding after having dried the first layer.151-170 appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.
UV drying (UV-A > 6 mW/cm²)
5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.
Sanding: wet P800
Sanding: orbital sander P400 - P500
Technical Information151-170 AE
08/2019
Glasurit® UV Primer filler grey aerosol can G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)655: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 655 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.
If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.
Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.
Mixing ratio Material is ready for use.
Shaking Shake vigorously for 1 - 2 min. before use.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats Primer surfacer formetal:½ + 1
Film thickness:max. 120 µm
Primer surfacer forplastic:½ + 1
Film thickness:max. 80 µm
Flash-off at 20°C 20 s between spray coatsIf higher film builds are necessary, a second layer 151-170 AE can be applied with intermediatesanding after having dried the first layer.151-170 AE appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.
UV drying (UV-A > 6 mW/cm²)
5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.
Sanding: wet P800
Sanding: orbital sander P400 - P500
Technical Information151-190
09/2019
Glasurit® UV Primer filler, dark grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)540: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 540 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer fillerProperties: Suitable for steel, galvanized steel, aluminium and plastics.
If plastic parts are primed with 934-10 Glasurit 1K Plastic Adhesion Primer, the product can be used on allcoatable plastics that are commonly used in the automotive industry.Good corrosion resistance, excellent topcoat holdout.
Remarks: • Film builds rapidly with this product, do not spray hiding.• Do not apply more than two coats.• Do not apply in direct sunlight.
Mixing ratio Material is ready for use.
Shaking Shake vigorously for 1 - 2 min. before use.
Spray viscosityDIN 4 at 20°C
18 - 20 s
Gravity cupSpraying pressure
HVLP gravity-feed spray gun 1.1 mm0.7 bar at the nozzle
Compliant gravity-feed spraygun:1.1 mm, 2.0 bar
Number of spraycoats Primer surfacer formetal:½ + 1
Film thickness:max. 120 µm
Primer surfacer forplastic:½ + 1
Film thickness:max. 80 µm
Flash-off at 20°C 20 s between spray coatsIf higher film builds on metallic substrates are necessary, a second layer 151-190 can be appliedwith intermediate sanding after having dried the first layer.151-190 appears transparent and should not be applied to achieve hiding power.With higher film builds a longer intermediate flash-off and a flash-off before drying isrecommended.
UV drying (UV-A > 6 mW/cm²)
5 min.By using LED lamps, the drying time can be reduced due to their higher intensity in the decisivewavelength range. This must be checked individually.
Sanding: wet P800
Sanding: orbital sander P400 - P500
Technical Information176-72
08/2016
Glasurit® 1K Primer Filler G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)180: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Water-thinnable primer fillerSealer for poorly cured old paintworkSealer for TPA substratesCan be used as guide coat (1:1 with Glasurit® 93-E3)
Properties: Contains less than 5% organic solventsRemarks: • Minimum application temperature: 15°C.
• Drying heavily depends on temperature, humidity, air circulation and film thickness.• Immerse spraygun heads in water when not working with the gun.• Use 700-1 for re-cleaning of working tools.• Collect left-over paints and waste water, treat them with 700-7 Coagulating Powder and dispose of
them according to the relevant technical data sheets.• Shelf life: 18 months.
Technical Information176-72
08/2016
Glasurit® 1K Primer Filler G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)180: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 180 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system
Spreading rate: 366 m²/l at 1 micron
Reducer + 10% 93-E3
Spray viscosityDIN 4 at 20°C
25 – 35 s Potlife at 20°C: 7 days
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 - 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 -1.8 mm 2.0 bar
Number of spraycoats 2
Film thickness 40 - 60 microns
Flash-off at 20°C approx. 5 min. between spraycoats, flash off until matt
Drying at 20 °CDrying at 60 °C
30 min. 2 h; temperature min. 20°C, humidity max. 50%30 min.
Infrared (short wave)Infrared (medium wave)
3 min. 50% + 5 min. 100% 15 – 20 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500 clean again with Glasurit® 700-1 Cleaner
Technical Information183-70
08/2019
Glasurit® 1K Express Primer Filler lightgrey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)743: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 743 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: 1K primer filler supplied in an aerosol can for use in automotive refinishing• Primer filler for minor sand-throughs to the bare metal• Corrosion protection product for use under Glasurit 285- primer fillers and filler surfacers (sanding
version)• Primer filler suitable for Spot-Repair
Properties: • Very good corrosion protection on steel, galvanised steel and aluminium• Fast drying• Good finish quality
Remarks:
1. Primer filler / corrosion protection product for use under Glasurit 285- primerfillers and filler surfacers (sanding version)
Application Primer filler Corrosion-protection product for useunder Glasurit 285- primer fillers and fillersurfacers (sanding version)
Paint system
Spreading rate
Shaking 2 min. 2 min.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats 3 - 4 1 - 2
Film thickness 30-40 microns 15-20 microns
Flash-off at 20°C approx. 5 min. between spraycoats 10 min.
Drying at 20 °CDrying at 60 °C
1.5 – 2 hours30 min.
Infrared (short wave)Infrared (medium wave)
5 min. 50% 7 min.
Sanding: manual P800 or “ultrafine” sanding pad
Technical Information183-70
08/2019
Glasurit® 1K Express Primer Filler lightgrey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)743: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 743 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
2. Primer filler in the Spot-Repair systemApplication Primer filler in the Spot-Repair system
Paint system
Spreading rate:
Shaking 2 min.
Number of spraycoats 3-4 coats, use spray head with a round spray jet
Film thickness 30-40 microns
Flash-off at 20°C until matt between spraycoats
Infrared (short wave)Infrared (medium wave)
5 min. 50% 7 min.
Sanding: manual P800 or “ultrafine” sanding pad
Technical Information183-90
08/2019
Glasurit® 1K Express Primer Filler darkgrey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)695: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 695 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: 1K primer filler supplied in an aerosol can for use in automotive refinishing• Primer filler for minor sand-throughs to the bare metal• Corrosion protection product for use under Glasurit 285- primer fillers and filler surfacers (sanding
version)• Primer filler suitable for Spot-Repair
Properties: • Very good corrosion protection on steel, galvanised steel and aluminium• Fast drying• Good finish quality
Remarks:
1. Primer filler / corrosion protection product for use under Glasurit 285- primerfillers and filler surfacers (sanding version)
Application Primer filler Corrosion-protection product for useunder Glasurit 285- primer fillers and fillersurfacers (sanding version)
Paint system
Spreading rate
Shaking 2 min. 2 min.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats 3 - 4 1 - 2
Film thickness 30-40 microns 15-20 microns
Flash-off at 20°C approx. 5 min. between spraycoats 10 min.
Drying at 20 °CDrying at 60 °C
1.5 – 2 hours30 min.
Infrared (short wave)Infrared (medium wave)
5 min. 50% 7 min.
Sanding: manual P800 or “ultrafine” sanding pad
Technical Information183-90
08/2019
Glasurit® 1K Express Primer Filler darkgrey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)695: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 695 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
2. Primer filler in the Spot-Repair systemApplication Primer filler in the Spot-Repair system
Paint system
Spreading rate:
Shaking 2 min.
Number of spraycoats 3-4 coats, use spray head with a round spray jet
Film thickness 30-40 microns
Flash-off at 20°C until matt between spraycoats
Infrared (short wave)Infrared (medium wave)
5 min. 50% 7 min.
Sanding: manual P800 or “ultrafine” sanding pad
Technical Information283-150
12/2016
Glasurit® Etch Primer Filler G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)760: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOCcontent of this product is 760 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer / Primer fillerProperties: Very good anti-corrosive properties, easy and quick sandingRemarks: For steel, aluminium and galvanised steel.
Do not recoat with polyester body filler!Do not use under 176-72!Not recoatable with 90 Line.
Technical Information283-150
12/2016
Glasurit® Etch Primer Filler G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)760: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOCcontent of this product is 760 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Primer filler Primer
Mixing ratio 2:1+10% 100% by vol. 283-150
1:1+30% 100% by vol. 283-150
Hardener 50% by vol. 352-228 100% by vol. 352-228
Reducer 10% by vol. 352-91/ -50/ -30/ -10 30% by vol. 352-91/ -50/ -30/ -10
Potlife at 20 °C 48 hours 48 hours
Spray viscosityDIN 4 at 20°C
16-17 s 14 s
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 - 1.8 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 –1.8 mm 2,0 bar
Number of spraycoats 4 1-2
Film thickness 30-35 µm 10-15 µm
Brushing 2 coats without thinner
Flash-off at 20°C approx. 10 min.
Drying at 20 °CDrying at 60 °C
60 min. 20 min.
Infrared (short wave)Infrared (medium wave)
3 min. 5 – 10 min.
Sanding P 800
Technical Information285-230
04/2019
Glasurit® Primer Filler Pro, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer filler / wet-on-wet fillerProperties: Suitable for steel, galvanized steel, aluminium, old paintwork and GRP / SMC
Good corrosion protection and weathering resistance, good finish qualityRemarks: • Use 581-90 Glasurit Guide Coat, black as guide coat (for a better sanding result).
• To create different shades of grey, 285-230 Glasurit Primer Filler Pro white and 285-290 black canbe mixed. (See Glasurit Filler Grey Shade Concept).
• No need to sand new e-coated parts.• Parts coated with 285-230 can be overcoated without intermediate sanding for up to 5 days• Clean the surface with 700-10 Glasurit Degreasing and cleaning agent before applying
285-230.• Minimum temperature for air drying: +15°C.
Technical Information285-230
04/2019
Glasurit® Primer Filler Pro, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Primer Filler
Spreading rate m² / l at 1 µm
Mixing ratio 5 : 1 : 1 for metal100% by vol.
285-230
5 : 1 : 1 for plastics100% by vol.
285-230
Hardener 20% by vol. 929-58 20% by vol. 929-58
Reducer 20% by vol. 352-91, -50, -216, 352-30, -40, -10
20% by vol. 522-10
Spray viscosityDIN 4 at 20°C
18 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun1.6 – 1.8 mm, 2.0 bar
Number of spraycoats ½ + 1
Film thickness 50 – 70 μm
Drying at 20 °CDrying at 60 °C
16 hfor 35 min
Infrared (short wave) 9 min (4 min. 60 °C, 5 min. 80 °C)
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-230
04/2019
Glasurit® Primer Filler Pro, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Wet-on-Wet Fillerfor metal
Wet-on-Wet Fillerfor plastics
Spreading rate m² / l at 1 µm
Mixing ratio 4 : 1 : 1100% by vol.
285-230
4 : 1 : 1100% by vol.
285-230
Hardener 25% by vol. 929-58 25% by vol. 929-58
Reducer 25% by vol. 352-91, -50, -216, 352-30, -40, -10
25% by vol. 522-10
Spray viscosityDIN 4 at 20°C
15 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats ½ + 1 = ½ x putty area / 1 x whole area Film thickness: app. 30 - 40 µm
Flash-off at 20°C 25 - 30 min
Technical Information285-230
04/2019
Glasurit® Primer Filler Pro, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application High-build primer filler
Spreading rate m²/l at 1 μm
Mixing ratio 5 : 1 : 1100% by vol.
285-230
Hardener 20% by vol. 929-58
Reducer 20% by vol. 352-91, -50, -216, 352-30, -40, -10
Spray viscosityDIN 4 at 20°C
18 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar /0.7 bar at the nozzle
Compliant gravity-feed spray gun1.6 –1.8 mm 2.0 bar
Number of spraycoats ½ + 2
Film thickness 80 – 120 μm
Flash-off at 20°C -
Drying at 20 °CDrying at 60 °C
16 h45 min
Infrared (short wave) 15 min (4 min. 60 °C, 11 min. 80 °C)
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-270
04/2019
Glasurit® Primer Filler Pro, grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer filler / primer / wet-on-wet fillerProperties: Suitable for steel, galvanized steel, aluminium, old paintwork and GRP / SMC
Good corrosion protection and weathering resistance, good finish qualityAnti-corrosion and adhesion primer for above mentioned substrates in Glasurit paint systemsCan be applied under 285- Glasurit primer fillers and primers
Remarks: • Use 581-90 Glasurit Guide Coat, black as guide coat (for a better sanding result).• No need to sand new e-coated parts.• Parts coated with 285-270 can be overcoated without intermediate sanding for up to 5 days• Clean the surface with 700-10 Glasurit Degreasing and cleaning agent before applying
285-270.• Minimum temperature for air drying: +15°C.
Technical Information285-270
04/2019
Glasurit® Primer Filler Pro, grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Primer Filler
Spreading rate m² / l at 1 µm
Mixing ratio 5 : 1 : 1 for metal100% by vol.
285-270
5 : 1 : 1 for plastics100% by vol.
285-270
Hardener 20% by vol. 929-58 20% by vol. 929-58
Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40
20% by vol. 522-10
Spray viscosityDIN 4 at 20°C
18 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun1.6 – 1.8 mm, 2.0 bar
Number of spraycoats ½ + 1
Film thickness 50 – 70 μm
Drying at 20 °CDrying at 60 °C
16 hfor 35 min
Infrared (short wave) 9 min (4 min 60 °C, 5 min 80 °C)
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-270
04/2019
Glasurit® Primer Filler Pro, grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Wet-on-Wet Fillerfor metal
Wet-on-Wet Fillerfor plastics
Spreading rate m² / l at 1 µm
Mixing ratio 4 : 1 : 1100% by vol.
285-270
4 : 1 : 1100% by vol.
285-270
Hardener 25% by vol. 929-58 25% by vol. 929-58
Reducer 25% by vol. 352-91, -50, -216352-30, -10, -40
25% by vol. 522-10
Spray viscosityDIN 4 at 20°C
15 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats ½ + 1 = ½ x putty area / 1 x whole area Film thickness: app. 30 - 40 µm
Flash-off at 20°C 25 - 30 min
Technical Information285-270
04/2019
Glasurit® Primer Filler Pro, grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application High-build primer filler Primer
Spreading rate m²/l at 1 μm
Mixing ratio 5 : 1 : 1100% by vol.
285-270
Hardener 20% by vol. 929-58
Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
18 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar /0.7 bar at the nozzleCompliant gravity-feed spray gun1.6 –1.8 mm 2.0 bar
HVLP spray gun: 1.3 – 1.7 mm2.0 – 3.0 bar / 0.7 bar at the nozzleCompliant gravity-feed spray gun1.3 – 1.7 mm 2.0 bar
Number of spraycoats ½ + 2 1 thin coat (covering)
Film thickness 80 – 120 μm 10 – 20 μm
Flash-off at 20°C - 10 – 15 min
Drying at 20 °CDrying at 60 °C
16 hfor 45 min
--
Infrared (short wave) 15 min (4 min 60 °C, 11 min 80 °C) -
Sanding: manual P800 -
Sanding: orbital sander P400 - P500 -
Technical Information285-290
04/2019
Glasurit® Primer Filler Pro, black G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer filler / wet-on-wet fillerProperties: Suitable for steel, galvanized steel, aluminium, old paintwork and GRP / SMC
Good corrosion protection and weathering resistance, good finish qualityRemarks: • Use 581-90 Glasurit Guide Coat, black as guide coat (for a better sanding result).
• To create different shades of grey, 285-230 Glasurit Primer Filler Pro white and 285-290 black canbe mixed. (See Glasurit Filler Grey Shade Concept).
• No need to sand new e-coated parts• Parts coated with 285-290 can be overcoated without intermediate sanding for up to 5 days• Clean the surface with 700-10 Glasurit Degreasing and cleaning agent before applying
285-290.• Minimum temperature for air drying: +15°C.
Technical Information285-290
04/2019
Glasurit® Primer Filler Pro, black G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Primer Filler
Spreading rate m² / l at 1 µm
Mixing ratio 5 : 1 : 1 for metal100% by vol.
285-290
5 : 1 : 1 for plastic100% by vol.
285-290
Hardener 20% by vol. 929-58 20% by vol. 929-58
Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40
20% by vol. 522-10
Spray viscosityDIN 4 at 20°C
18 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun1.6 – 1.8 mm, 2.0 bar
Number of spraycoats ½ + 1
Film thickness 50 – 70 μm
Drying at 20 °CDrying at 60 °C
16 hfor 35 min
Infrared (short wave) 9 min (4 min 60 °C, 5 min 80 °C)
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-290
04/2019
Glasurit® Primer Filler Pro, black G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Wet-on-Wet Fillerfor metal
Wet-on-Wet Fillerfor plastics
Spreading rate m² / l at 1 µm
Mixing ratio 4 : 1 : 1100% by vol.
285-290
4 : 1 : 1100% by vol.
285-290
Hardener 25% by vol. 929-58 25% by vol. 929-58
Reducer 25% by vol. 352-91, -50, -216352-30, -10, -40
25% by vol. 522-10
Spray viscosityDIN 4 at 20°C
15 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats ½ + 1 = ½ x putty area / 1 x whole area Film thickness: app. 30 - 40 µm
Flash-off at 20°C 25 - 30 min
Technical Information285-290
04/2019
Glasurit® Primer Filler Pro, black G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application High-build primer filler
Spreading rate m²/l at 1 μm
Mixing ratio 5 : 1 : 1100% by vol.
285-290
Hardener 20% by vol. 929-58
Reducer 20% by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
18 – 20 s
Potlife at 20 °C 90 min
Gravity cupSpraying pressure
HVLP spray gun: 1.7 – 1.9 mm2.0 – 3.0 bar /0.7 bar at the nozzle
Compliant gravity-feed spray gun1.6 –1.8 mm 2.0 bar
Number of spraycoats ½ + 2
Film thickness 80 – 120 μm
Flash-off at 20°C -
Drying at 20 °CDrying at 60 °C
16 h45 min
Infrared (short wave) 15 min (4 min 60 °C, 11 min 80 °C)
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-505
11/2018
Glasurit® HS Primer Filler, grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Efficient HS primer filler with excellent wet and dry sanding propertiesProperties: High solids content; fast drying; good corrosion protection, good weathering resistance and good finishRemarks: • 285-505 corresponds to grey shade of 285-.../03
• 285-505 can be mixed with Glasurit HS Primer Fillers 285-555 black and 285-655 white to achievedifferent grey shades.
• You can add 523-15 Glasurit Racing Additive (see technical data sheet of 523-15) to accelerate thedrying process of 285-505
• Use 581-90 as guide coat (for a better sanding result)
Technical Information285-505
11/2018
Glasurit® HS Primer Filler, grey G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system RATIO Aqua, RATIO HS
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-505
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
18 – 22 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm 2.0 bar
Number of spraycoats 2Flash-off between spraycoats until mat, no flash-off before drying.
Film thickness 50 – 70 µm
Drying at 20 °CDrying at 60 °C
3 h 20 min.
Infrared (short wave)Infrared (medium wave)
9 min. 10 – 15 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-555
11/2018
Glasurit® HS Primer Filler, black G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Efficient HS primer filler with excellent wet and dry sanding propertiesProperties: High solids content; fast drying; good corrosion protection, good weathering resistance and good finishRemarks: • 285-555 corresponds to grey shade of 285-.../00
• 285-555 can be mixed with Glasurit HS Primer Fillers 285-505 grey and 285-655 white to achievedifferent grey shades.
• You can add 523-15 Glasurit Racing Additive (see technical data sheet of 523-15) to accelerate thedrying process of 285-555
Paint system RATIO Aqua, RATIO HS
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-555
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
18 – 22 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm 2.0 bar
Number of spraycoats 2Flash-off between spraycoats until mat, no flash-off before drying.
Film thickness 50 – 70 µm
Drying at 20 °CDrying at 60 °C
3 h 20 min.
Infrared (short wave)Infrared (medium wave)
9 min. 10 – 15 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-655
11/2018
Glasurit® HS Primer Filler, white G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Efficient HS primer filler with excellent wet and dry sanding propertiesProperties: High solids content; fast drying; good corrosion protection, good weathering resistance and good finishRemarks: • 285-655 corresponds to grey shade of 285-.../07
• 285-655 can be mixed with Glasurit HS Primer Fillers 285-505 grey and 285-555 black to achievedifferent grey shades.
• You can add 523-15 Glasurit Racing Additive (see technical data sheet of 523-15) to accelerate thedrying process of 285-655
• Use 581-90 as guide coat (for a better sanding result)
Technical Information285-655
11/2018
Glasurit® HS Primer Filler, white G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system RATIO Aqua, RATIO HS
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-655
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
18 – 22 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar
Number of spraycoats 2Flash-off between spraycoats until mat, no flash-off before drying.
Film thickness 50 – 70 µm
Drying at 20 °CDrying at 60 °C
3 h 20 min.
Infrared (short wave)Infrared (medium wave)
9 min. 10 – 15 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-700
02/2016
Glasurit® Primer Filler G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer fillerProperties: excellent spray ability, sagging resistance and filling properties
wet and dry sanding propertiesRemarks: • Use 581-90 as guide coat (for a better sanding result)
• 285-700 can be mixed with Glasurit 523-15 Racing Additive to reduce the drying time (to 15 min at60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the mixture has a potlifeof only 20 min at 20°C and can only be used for applying film thicknesses of 50-70 µm.
Paint system
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-700
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
20 - 24 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar
Number of spraycoats 2
Film thickness 50 – 70 µm
Drying at 20 °CDrying at 60 °C
3 h 30 min.
Infrared (short wave)Infrared (medium wave)
9 min. 10 – 15 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-700
02/2016
Glasurit® Primer Filler G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Alternative: application of high film buildsPaint system
Spreading rate Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-700
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
20 - 24 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar
Number of spraycoats 3 - 4
Film thickness 100 - 200 µm
Drying at 20 °CDrying at 60 °C
16 h40 min.
Sanding: wet P800
Sanding: orbital sander P400 - P500
Technical Information285-730
02/2016
Glasurit® Primer Filler, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer fillerProperties: excellent spray ability, sagging resistance and filling properties
wet and dry sanding propertiesRemarks: • Use Glasurit 581-90 Guide Coat, black as guide coat (for a better sanding result)
• 285-730 can be mixed with Glasurit 285-790 Primer Filler to achieve different grey shades• 285-730 can be mixed with Glasurit 523-15 Racing Additive to reduce the drying time (to 15 min at
60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the mixture has a potlifeof only 20 min at 20°C and can only be used for applying film thicknesses of 50-70 μm.
Technical Information285-730
02/2016
Glasurit® Primer Filler, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-730
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
20 - 24 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar
Number of spraycoats 2
Film thickness 50 – 70 µm
Drying at 20 °CDrying at 60 °C
3 h 30 min.
Infrared (short wave)Infrared (medium wave)
8 min. 10 – 15 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-730
02/2016
Glasurit® Primer Filler, white G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)539: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Alternative: application of high film buildsPaint system
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol. 285
285-730
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
20 - 24 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm; 2.0 bar
Number of spraycoats 3 - 4
Film thickness 100 - 200 µm
Drying at 20 °CDrying at 60 °C
16 h40 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-790
02/2016
Glasurit® Primer Filler, black G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer filler withProperties: excellent spray ability, sagging resistance and filling properties
wet and dry sanding propertiesRemarks: • 285-790 can be mixed with Glasurit Primer Filler 285-730 to achieve different grey shades
• 285-790 can be mixed with Glasurit 523-15 Racing Additive to reduce the drying time (to 15 min at60°C, 1.5h at 20°C or 6 min with short-wave infrared). Please observe that the mixture has a potlifeof only 20 min at 20°C and can only be used for applying film thicknesses of 50-70 μm.
Paint system
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-790
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
20 - 24 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm, 2.0 bar
Number of spraycoats 2
Film thickness 50 – 70 µm
Drying at 20 °CDrying at 60 °C
3 h 30 min.
Infrared (short wave)Infrared (medium wave)
8 min. 10 – 15 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information285-790
02/2016
Glasurit® Primer Filler, black G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Alternative: application of high film buildsPaint system
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100 % by vol.
285-790
Hardener 25 % by vol. 929-55, -56
Reducer 25 % by vol. 352-91, -50, -216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
20 - 24 s Potlife 20°C 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 – 1.9 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 – 1.8 mm, 2.0 bar
Number of spraycoats 3 - 4
Film thickness 100 - 200 µm
Drying at 20 °CDrying at 60 °C
16 h40 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information801-72
02/2016
Glasurit® Epoxy Primer Filler grey G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)459: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 459 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer filler/ wet-on-wet primer filler /adhesion promoterProperties: Good corrosion protection, high build, good finish, rub-resistant with Glasurit® 541-5 Wax and Silicone
RemoverRemarks: • Can be tinted with max. 10% of 568-408 CV Primer Tinting Paste, black (mixture code: 801-72G)
• Minimum temperature for air drying: +15°C.• Best possible finish if 801-72 is force-dried.• When being used as adhesion promoter, 801-72 can be filled with Glasurit® 839- knifing fillers after
3 hours at 20°C
Technical Information801-72
02/2016
Glasurit® Epoxy Primer Filler grey G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)459: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 459 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
1. Primer FillerApplication Primer filler
Paint system
Spreading rate: 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100% by vol.
801-72
Hardener 965-60 965-60
Reducer 25% by vol. 352-91, -216352-30, -40
Spray viscosityDIN 4 at 20°C
18-20 s Potlife at 20 °C: 8 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.7 - 1.9 mm2.0 – 3.0 bar, 0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 -1.8 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40-50 µm
Drying at 20 °CDrying at 60 °C
8 hours30 min.
Infrared (short wave)Infrared (medium wave)
11 min. 10 – 15 min.
Sanding P800
Sanding: orbital sander P400 - P500
Technical Information801-72
02/2016
Glasurit® Epoxy Primer Filler grey G / GF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)459: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 459 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
2. Wet-on-wet primer / adhesion primerApplication wet on wet surfacer Adhesion primer
Paint system
Spreading rate 425 m²/l at 1 µm 425 m²/l at 1 µm
Mixing ratio 4 : 1 : 1 100% by vol. 801-72
4 : 1 : 1 100% by vol. 801-72
Hardener 25% by vol. 965-60 25% by vol. 965-60
Reducer 25% by vol. 352-216, -91352-30, -40
25% by vol. 352-216, -91352-30, -40
Potlife at 20 °C 8 hours 8 hours
Spray viscosityDIN 4 at 20°C
18 - 20 s 18 - 20 s
Gravity cupSpraying pressure
HVLP gravity-feed spray gun: 1.3 mm2.0 - 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 - 1.4 mm 2.0 bar
Number of spraycoats ½ + 1 1
Film thickness 25-35 µm 15-20 µm
Flash-off at 20°C 20 min. 10 - 20 min.
Technical Information934-70
02/2016
Glasurit® 2K Plastic Primer Filler G / PF
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Primer and primer filler for the economical repair of all paintable plastics on carsProperties: Good adhesion on all paintable plastics used in car production. Suitable for use as an adhesion promoter
in three stage systems and also as a primer filler under Glasurit topcoat systemsRemarks: • 30 minutes of forced drying at 60°C are necessary when the product is used as a sanding filler.
Primer Filler Primer
Paint system S 3 S 3a
Spreading rate:
Mixing ratio 4 : 1 :1 100% by vol.
934-70
Hardener 25% by vol. 929-56
Reducer 25% by vol. 352-50 /-91352-30, -40
Spray viscosityDIN 4 at 20°C
17-19 s Potlife at 20°C 3.5 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats ½ + 1 coat 1 coat
Film thickness 30 - 40 µm ca. 20 µm
Flash-off at 20°C 20 min. 20 min.
Technical Information185-66
08/2019
Glasurit® 1K Filler G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)673: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 673 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: 1K Filler supplied in an aerosol can for use in automotive refinishing, available in the gray shade variants00, 02, 05 and 07.• Filler for sand-throughs• Filler suitable for spot repair
Properties: • Can be used on old paintwork and sand-throughs.Remarks: Filler with coloring properties. Sand-throughs to the bare metal must be primed before the use of 185-66.
Application Filler
Paint system
Shaking 2 min.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats 1 - 2
Film thickness 15 - 30 µm
Flash-off at 20°C approx. 5 - 10 min. between spraycoats
Drying at 20 °CDrying at 60 °C
1 h30 min.
Technical Information285-0
02/2016
Glasurit® HS Transparent Sealer G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)525: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 525 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Adhesion promoter (refinish and sign-writing), sealer (body filler patches, covering of sanding scratches)Properties: No sanding before topcoat or basecoat application; efficient use, safe application; no overspray visible in
door rebate as filler is transparentRemarks: • If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that
are commonly used in the automotive industry.• Clean with 352-50 in case of sign-writing.• 285-0 does not flow under the sign-writing film.• Select hardener and thinner according to ambient temperature and size of object to be painted.
Application Adhesion primer / Sealer
Paint system
Spreading rate 378 m²/l at 1 µm
Mixing ratio 3 : 1 : 1100% by vol.
285-0
Hardener 33% by vol. 929-56, -55
Reducer 33% by vol. 352-91, -50, -216352-30, -10, -40
Potlife at 20 °C 3 hours
Spray viscosityDIN 4 at 20°C
14-18 s
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 1 - 2
Film thickness 20 – 30 µm
Flash-off at 20°C 15 - 20 min
Technical Information285-31
02/2016
Glasurit® HS VOC Non-Sanding Filler,light grey G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)530: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Wet-on-wet surfacer for economical repairsProperties: No sanding and no drying times; very safe to spray; good finish, good weathering resistanceRemarks: • Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90
Guide Coat.• No need to sand new e-coated parts• Prime sand-throughs with 283-150 Glasurit® etch primer filler.• If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that
are commonly used in the automotive industry.• Parts coated with 285-31 can be overcoated without intermediate sanding for up to 5 days
Paint system S 4
Spreading rate: 331 m²/l at 1 µm
Mixing ratio 3 : 1 : 1 100% by vol.
285-31
Hardener 33% by vol. 929-56, -55
Reducer 33% by vol. 352-91/-216352-30, -40
Spray viscosityDIN 4 at 20°C
16-19 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)
Film thickness: approx. 20-35 µm
Flash-off at 20°C 10 min. solids / 15-20 min. topcoat/basecoat metallics (matt)
Technical Information285-38
02/2016
Glasurit® HS VOC Non-Sanding Filler,white G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)530: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Wet-on-wet surfacer for economical repairsProperties: No sanding and no drying times; very safe to spray; good finish, good weathering resistance
To use in every mixing ratio with 285-49 Glasurit Non-Sanding Filler VOC black, to get different grey colors.Remarks: • Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90
Guide Coat.• No need to sand new e-coated parts• Prime sand-throughs with 283-150 Glasurit® etch primer filler.• If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that
are commonly used in the automotive industry• Parts coated with 285-38 can be overcoated without intermediate sanding for up to 5 days
Paint system S 4
Spreading rate: 331 m²/l at 1 µm
Mixing ratio 3 : 1 : 1 100% by vol.
285-38
Hardener 33% by vol. 929-56, -55
Reducer 33% by vol. 352-91/-216352-30, -40
Spray viscosityDIN 4 at 20°C
16-19 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)
Film thickness: approx. 20-35 µm
Flash-off at 20°C 10 min. solids / 15-20 min. topcoat / basecoat metallics (matt)
Technical Information285-49
02/2016
Glasurit® HS VOC Non-Sanding Filler,black G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)535: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 535 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Wet-on-wet surfacer for economical repairsProperties: No sanding and no drying times; very safe to spray; good finish, good weathering resistance
To use in every mixing ratio with 285-38 Glasurit Non-Sanding Filler VOC white, to get different grey colors.Remarks: • Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90
Glasurit Guide Coat• No need to sand new e-coated parts• Prime sand-throughs with 283-150 Glasurit etch primer filler• If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that
are commonly used in the automotive industry.• Parts coated with 285-49 can be overcoated without intermediate sanding for up to 5 days
Paint system S 4
Spreading rate: 331 m²/l at 1 µm
Mixing ratio 3 : 1 : 1 100% by vol.
285-49
Hardener 33% by vol. 929-56, -55
Reducer 33% by vol. 352-91/-216352-30, -40
Spray viscosityDIN 4 at 20°C
16-19 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)
Film thickness: approx. 20-35 microns
Flash-off at 20°C 10 min. solids / 15-20 min. topcoat / basecoat metallics (matt)
Technical Information285-95
02/2016
Glasurit® HS VOC Tintable Filler,transparent G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)530: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Transparent filler component which, on tinting with Glasurit® 22 Line HS 2K Topcoat VOC, is used as acoloured filler. Suitable as a sanding filler or wet-on-wet surfacer.Use with colours that have poor hiding power, in the plastics finishing system (S. 3 / 3a), or as a colouredfiller for areas exposed to stone chipping.
Properties: • Helps to save labour and topcoat material.• Helps to use up rests of Glasurit 22 Line HS 2K Topcoat (VOC)
Remarks: • When you use 285-95 as a wet-on-wet surfacer, the only suitable primer is 285-270 Glasurit®Primer Filler Pro grey.
• Never use 22 Line mixing bases on their own, be sure to mix them with 522-M0 or 522-M0/35 first!The mixture of Glasurit® 285-95 HS VOC Tintable Filler with Glasurit® 22 Line VOC Topcoat mustbe stirred immediately!
• The filler can also be used to finish plastics according to System S 3a if Glasurit 522-111 SoftfaceAdditive is added to mixture A or B, at a ratio of 4:1 or 2:1 by volume or according to System S 3if Glasurit 522-10 Plastic Additive is added
Technical Information285-95
02/2016
Glasurit® HS VOC Tintable Filler,transparent G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)530: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
1. Sanding fillerApplication Sanding filler
Paint system
Spreading rate: 439 m²/l at 1 µm
Mixing ratio Step 1 (A)2 : 1100% by vol. 285-9550% by vol. 22 Line VOC
Step 24 : 1 : 1100% by vol. mixture (A)
Hardener 25% by vol. 929-56, -55
Reducer 25% by vol.
352-91/-50/-216352-30, -10, -40
Spray viscosityDIN 4 at 20°C
18 - 20 s Potlife at 20°C: 1 hour
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.7 - 1.9 mm2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.6 -1.8 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40-60 µm
Drying at 20 °CDrying at 60 °C
4 hours40 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Sanding P800
Sanding: orbital sander P400 - P500 (only after drying over night or for 40 min. at 60°C)
Technical Information285-95
02/2016
Glasurit® HS VOC Tintable Filler,transparent G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c I)(540)530: The EU limit value for this product ( product category: IIB.c II )in ready to use form is max 540 g/litre of VOC. The VOC contentof this product is 530 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
2. Wet-on-wet surfacerPaint system
Spreading rate: 423 m²/l at 1 µm
Mixing ratio Step 1 (B)1 : 1100% by vol. 285-95100% by vol. 22 Line VOC
Step 23 : 1 : 1100% by vol. mixture (B)
Hardener 33% by vol. 929-56, -55
Reducer 33% by vol. 352-91/-216352-30, -40
Spray viscosityDIN 4 at 20°C
14 - 18 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 (one on body-filled area and one on entiresurface to be painted)
Film thickness: approx. 30 µm
Flash-off at 20°C 15 - 20 min.
Technical Information285-888
01/2015
Glasurit® Filler VOC grey G / F
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c II)(540)539: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOCcontent of this product is 539 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Two-pack acrylic filler to be used as sanding filler or high-build primerProperties: Very safe to spray and good dry and wet sanding propertiesRemarks: • Prime larger bare metal sand-throughs with Glasurit 283-150 Etch Primer Filler
• Use 581-90 as guide coat (for a better sanding result).• Use Glasurit 929-88 Hardener and Glasurit 352-88 Reducer
Application Sanding filler High-build primer
Paint system
Spreading rate 375 m²/l at 1 μm
Mixing ratio 4 : 1 : 1100% by vol. 285-888
4 : 1 : 1100% by vol. 285-888
Hardener 25% by vol. 929-88 25% by vol. 929-88
Reducer 25% by vol. 352-88 25% by vol. 352-88
Spray viscosityDIN 4 at 20°C
18 - 22 s Potlife at :20°C 1 h 18 – 22 s Potlife at 20°C: 1 h
Gravity cupSpraying pressure
HVLP spraygun: 1.7 – 1.9 mm2.0 - 3.0 bar/0.7 bar at the nozzle
Compliant gravity-feed spraygun1.6 – 1.8 mm, 2.0 bar
Number of spraycoats 2 50 – 70 μm 3 – 4 max. 150 μm
Drying at 20 °CDrying at 60 °C
4 h30 min
8 h40 min
Infrared (short wave)Infrared (medium wave)
8 min10 - 15 min
8 min10 - 15 min
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information22- VOC
04/2016
22 Line Glasurit® HS 2K Topcoat VOC G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Direct gloss HS solid-colour topcoatProperties: High solids content; efficient; outstanding weathering resistance, yellowing resistance, hardness; very good
curing; very good gloss and buildRemarks: • Select reducers according to temperature and size of object.
• Do not use mixing bases on their own, but always with 522-MC35 Mixing Clear (4:1)!
Paint system S 10
Spreading rate: 475 m²/l at 1 µm
Mixing ratio Weight in according to mixing formula.2 : 1 + 10%, use mixing stick100% by vol. 22 Line VOC
Hardener 50% by vol. 929-33, -31, -34
Reducer 10% by vol. 352-91 / -50 / -21610% by vol 352-30 / -10 / -40
Spray viscosityDIN 4 at 20°C
approx. 20-24 s Potlife at 20°C: 2-3 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
2 Film thickness: 50-70 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: approx. 50 µm
Flash-off at 20°C approx. 5 minutes after each spray coat
Drying at 20 °CDrying at 60 °C
8 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information22- VOC MC600
05/2018
22 Line Glasurit® HS 2K Topcoat VOCMC600 G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Direct gloss HS solid-colour topcoatProperties: High solids content; efficient; outstanding weathering resistance, yellowing resistance, hardness; very good
curing; very good gloss and buildRemarks: • Select reducers according to temperature and size of object.
• Do not use mixing bases on their own, but always with 522-MC600 Mixing Clear (3:1)!
Paint system S 10
Spreading rate: 475 m²/l at 1 µm
Mixing ratio Weight in according to mixing formula.3 : 1 : 1100% by vol. 22 Line VOC MC600
Hardener 33% by vol. 929-61, -63, -64
Reducer 33% by vol 352-30 / -10 / -40
Spray viscosityDIN 4 at 20°C
approx. 18 - 22 s Potlife at 20°C: 2 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
2 Film thickness: 50-70 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: approx. 50 µm
Flash-off at 20°C approx. 5 minutes after each spray coat
Drying at 20 °CDrying at 60 °C
8 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information22- matt
11/2017
Glasurit® 22 Line HS 2K Topcoat, mat,Glasurit® 22 Line HS 2K Topcoat 22-1250-M
G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Mat direct gloss HS solid-colour topcoatProperties: High solids content; efficient; outstanding weathering resistance, yellowing resistance and hardness; very
good curing; very good buildRemarks: • Select hardener according to ambient temperature and size of object to be painted.
• Also for use on plastics, without the need to add Glasurit 522-111 Softface Additive.• Do not mix with 522-M 0 and 522-MC 35 Mixing Clear or 22 VOC MC600.• Prepare only the quantity of paint that will be used the same day because the gloss level may change
when the mixture is stored!Stir immediately after adding 522-322 HS Matting Agent!
Technical Information22- matt
11/2017
Glasurit® 22 Line HS 2K Topcoat, mat,Glasurit® 22 Line HS 2K Topcoat 22-1250-M
G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application Glasurit 22 Line HS 2K Topcoat / 22-1250-M rallye black mat
Step 1:Mixing ratio
Example: blackmatt100% by weight 22-1250-M silk-matt100% by weight 22-M 26 black100% by weight 522-322satin-gloss100% by weight 22-M 26 black70% by weight 522-322semi-bright100% by weight 22-M 26 black40% by weight 522-322
Example: whitematt100% by weight 22-M 60 white70% by weight 522-322silk-matt100% by weight 22-M 60 white40% by weight 522-322satin-gloss100% by weight 22-M 60 white30% by weight 522-322semi-bright100% by weight 22-M 60 white20% by weight 522-322
Step 2:Mixing ratio
2 : 1 + 10%100% by vol.
use mixing stickmixture of 22 Line +522-322 or 22-1250-M(Factory pack)
3 : 1 : 1100% by vol.
use mixing stickmixture of 22 Line +522-322 or 22-1250-M(Factory pack)
Hardener 50% by vol. 929-93 / -91 / -94Glasurit HS TopcoatHardeners929-33 / -31 /-34 Glasurit VOCHardeners
33% by vol. 929-61, -63, -64Glasurit VOCHardeners
Reducer 10% by vol. 352-91 / -50 / -216352-30, -10, -40
33% by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
approx. 20 – 24 s Potlife 20°C 1 - 2 h
Gravity cupSpraying pressure
HVLP spraygun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed spraygun:1.3 – 1.4 mm, 2.0 bar
Number of spraycoats 2 Film thickness 50 – 70 μm
Flash-off at 20°C Flash off until matt after each spraycoat and before baking.
Drying at 20 °CDrying at 60 °C
8 h30 min.
Technical Information22- matt
11/2017
Glasurit® 22 Line HS 2K Topcoat, mat,Glasurit® 22 Line HS 2K Topcoat 22-1250-M
G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Technical Information90-
05/2017
90 Line Glasurit® Basecoat G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Metallic and solid-colour basecoat/clearcoat finishing. Wet-on-wet process with Glasurit 923- Clear.Properties: Very good hiding power, high efficiency.
Water-thinnable, less than 10% organic solvents.Remarks: • Mixing formulas with 90-M4 and mixing bases are available to cover the whole range of colours
needed in automotive refinishing.• At rather high temperatures or when refinishing large surfaces, it is possible to replace 90-M4 by 90-
M4 slow, while replacing 93-E3 Adjusting base by 93-E3 slow at the same time.• Mixtures will keep for up to 6 months when stored in plastic containers or cans coated inside.• Use of 93-IC 330 if recommended by car manufacturers (see Technical Information).• Flash-off times can be reduced significantly by using appropriate air blow equipment.• Flash-off time before application of 923- Clear: 2-3 min. (until surface is mat).• When using white colors with high spray viscosity the mixing ratio can be changed to 100 : 80.
Technical Information90-
05/2017
90 Line Glasurit® Basecoat G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system RATIO Aqua
Spreading rate: 130 m²/l at 1 µm
Mixing ratio 2 : 1100% by vol. 90 Line Metallics/Solids (acc. to mixing formula)
Reducer 50% by vol. 93-E3 Adjusting Base *(stir IMMEDIATELY after having added adjusting base) *When using 90-M4 slow in the mixing formula, 93-E3 slow must also be used.
Spray viscosityDIN 4 at 20°C
approx. 18-24 s
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0-3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.3-1.4 mm, 2.0 bar
Number of spraycoats 2 (spray to cover) + ½ to match the effect Film thickness: 10-15 µm
Flash-off at 20°C Approx. 5 min. after each spraycoat.
Intermediate dryingDrying at 20°CBlow dry with Dry Jet
Flash off until mat after each spraycoat.
Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.
Technical Information90-
10/2011
Glasurit® Basecoat90- Limited Edition90- Magic Collection
G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: 90 Line basecoat/clearcoat finishes that can only be reproduced with rarely used pigments. These rarelyused pigments are not available as a mixing base for the mixing machine. The colours are only availableas ready-mixed colours from the respective business partner.
Properties: • Special-colour finishes that can only be reproduced with rarely used pigments.• “Glasurit Magic Collection” colours to create special colour effects.
Remarks: • Flash-off times can be reduced significantly by using appropriate air blow equipment.• Flash-off time before application of 923- Clear: 2 - 3 min. (until surface is mat).
Paint system
Step 1 Please search the colour database for the colour code to check whether a specific ground coatcolour is required for “Step 1” to reproduce the desired colour.
Mixing ratio 2 : 1100% by vol. 90- , includes11- Limited Edition, mixing clear 90-M4 and additional mixing bases, ifrequired.
Reducer 50% by vol. 93-E3 Adjusting Base(stir IMMEDIATELY after having added adjusting base)
Spray viscosityDIN 4 at 20°C
approx. 18 – 24 s Potlife at 20°CMixture will keep for one week when stored inplastic containers or cans coated inside.
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats Limited Edition:Magic Collection:
2 + ½2
Film thickness: 10-15 µm
Flash-off at 20°C Approx. 5 min. after each spraycoat.
Intermediate dryingDrying at 20°CBlow dry with Dry Jet
Flash off until mat after each spraycoat.
Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.
Technical Information90- Mixed tinters
10/2019
90 Line Glasurit® Basecoat mixed tinters G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Mixture of 90 Line mixed tinters without 90-M4 Waterborne Mixing Base (e. g. at colour TOY 8Y0). Pleaseobserve the mixing ratio on the label.Mixture will keep for six months when stored in plastic containers or cans coated inside.
Paint system RATIO Aqua
Spreading rate: 130 m²/l at 1 µm
Mixing ratio 70% by weight 90-M4*30% by weight 90 Line mixed tinters (stir after addition of product)
2 : 1 100% by vol. 90 Line (mixture of 90-M4 Waterborne Mixing Base / 90 Line mixed tinters)
Reducer 50% by vol. 93-E3 Adjusting Base (stir IMMEDIATELY after having added adjusting base)* When using 90-M4 Waterborne Mixing base slow, use also 93-E3 slow.
Spray viscosityDIN 4 at 20°C
approx. 18-24 s Potlife at 20°C:
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 (spray to cover) + ½ to match the effect Film thickness 10-15 µm
Flash-off at 20°C Approx. 5 min. after each spraycoat.
Intermediate dryingDrying at 20°CBlow dry with Dry Jet
Flash off until mat after each spraycoat.
Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.
Technical Information90- Factory- pack
10/2019
90 Line Glasurit® Basecoat factory pack G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Mixture of 90 Line factory-packed colour with 90-M4 Waterborne Mixing Base (e. g. at colour TOY 8Y0).Please observe the mixing ratio on the label!Mixture will keep for six months when stored in plastic containers or cans coated inside.
Paint system RATIO Aqua
Spreading rate: 130 m²/l at 1 µm
Mixing ratio 2 : 1 100% by vol. 90 Line (90 Line factory-packed colour with 90-M4)
Reducer 50% by vol. 93-E3 Adjusting Base(stir IMMEDIATELY after having added adjusting base)
Spray viscosityDIN 4 at 20°C
approx. 18-24 s Potlife at 20°C:
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 (spray to cover) + ½ to match the effect Film thickness 10-15 µm
Flash-off at 20°C Approx. 5 min. after each spraycoat.
Intermediate dryingDrying at 20°CBlow dry with Dry Jet
Flash off until mat after each spraycoat.
Sanding Remove dust nibs by dry sanding; gently fade out applying mist coat afterwards.
Technical Information90-905
03/2013
Blend-in Technique with Glasurit® 90-905 Alusilber
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Special tinting base to match certain colours like BMW A80, BMW A91 or VW LZ49Remarks: Substrates: Glasurit Filler / Surfacer or Primer Filler 285-, 801-72 or full cured, solvent resistant old paint
work.Observe the pretreatment in particular.If the rough surface of primer filler remains, it will result in a scaly appearance.If the sand-scratch marks of P500 remains, it will affect the surface quality by mottling or telegraphing thesand-scratches.Use sanding guide to control the sanding processUse soft inter face pad for orbital sander.
1. Pretreatment
P500 P1000 P1500Fade
out zone
700-11x
wipe dry
2. Application of 90-M50 Tricoat Additive (1)90-M50Glasurit®Blending Clear
2:193- E3
1 - 2fading outinto the
surroundingarea
Flash offuntil matt
HVLP1.3 mm2.0 bar
Technical Information90-905
03/2013
Blend-in Technique with Glasurit® 90-905 Alusilber
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
3. Application 90 Line “Alusilber” 90-905 shade90-905Glasurit®Alusilber
2:193- E3
Stirimmediately
afterhavingadded
adjustingbase
2 - 3 Flash offuntil mat
after eachspraycoat
HVLP 1.3 mm
1.0 -1.5 bar
4. Application of 90-M50 Blending Clear (2)90-M50Glasurit®Blending Clear
2:193- E3
1 - 2fading outinto the
surroundingarea
Flash offuntil matt
HVLP1.3 mm2.0 bar
Before the effect coat of 90 line,apply a wet coat of 90-M50 on theblending area to avoid overspray mist.
5. Application of 90 Line “Alusilber” 90-905 shade (2)90-905Glasurit®Alusilber
2:193- E3
Stirimmediately
afterhavingadded
adjustingbase
2 effectcoats
fading outinto the
surroundingarea
Flash offuntil mat
after eachspraycoat
HVLP1.3 mm
0.8-1.5 bar
Technical Information90-905
03/2013
Blend-in Technique with Glasurit® 90-905 Alusilber
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
6. Application of 923- clear according to technical information923-Glasurit® Clear
Technical Information90-905
03/2013
Edge-to-edge repair with Glasurit® 90-905 Alusilber
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Special tinting base to match certain colours BMW A80, BMW A91 or VW LZ49Remarks: Substrates: Glasurit Filler / Surfacer or Primer Filler 285-, 801-72 or fully cured, solvent resistant old paint
work.Observe the pretreatment in particular.If the rough surface of primer filler remains, it will result in a scaly appearance.If the sand-scratch marks of P500 remains, it will affect the surface quality by mottling or telegraphing thesand-scratches.Use sanding guide to control the sanding process.Use soft interface pad for orbital sander.
1. Pretreatment
P500 P1000 700-11x
wipe dry
2. Application of Tricoat Additive90-M50Glasurit®Blending Clear
2:193- E3
1 - 2 15 minat 20 °C
HVLP1.3 mm2.0 bar
For ground coat, apply wet coat to avoid generatingpeel on the surface.Allow the total dry time to expire in orderto avoid creating a scaly surface.
Technical Information90-905
03/2013
Edge-to-edge repair with Glasurit® 90-905 Alusilber
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
3. Application of 90 Line containing "Alusilber" 90-90590-905Glasurit®Alusilber
2:193- E3
Stirimmediately
afterhavingadded
adjustingbase
2 - 3 +2 effectcoats
Flash offuntil mat
after eachspraycoat
HVLP1.3 mm2.0 bar
4. Application of 923- clear according to the technical information923-Glasurit® Clear
Technical Information93-IC 330
01/2015
Glasurit® 90 LineAdditive for basecoat G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: • For special applications recommended by car manufactures, the usage of 93-IC 330 could benecessary in 90 Line basecoats.
• Additive for solid-colour 90 Line and for use in solid-colour basecoats applied as a ground coat in 90Line 3-layer systems to improve tape resistance and hardness.
Remarks: • Substrates: Solvent-resistant old paintwork, sanding filler, Glasurit 285- primer fillers• Pre-treatment: Clean surfaces with 700-1 / sand with P400 - P500 / clean again with 700-1.
Alternative: apply to Glasurit wet-on-wet filler
100 % by vol.5 % by vol.50 - 70 % by vol.
90 Line basecoat*93-IC 33093-E3
Mixing ratio Mix the 90 Line basecoat to the formula and stir it carefully.Add 93-IC 330 and stir again carefully. Add 93-E3 and stir carefully. * 93-IC 330 is unsuitable for use in mixing formulas which contain the waterborne dispersions 11-E20A, 11-E30A or 11-E30B or mixing base concentrates 80-M.
Spray viscosityDIN 4 at 20°C
approx. 19 - 24 s Potlife at 20°C: 2 h
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar /0.7 bar at the nozzle
Compliant gravity-feed gun:1.3 – 1.4 mm, 2.0 bar
Number of spraycoats 2 - 3For some colours, one further spraycoat may benecessary.
Film thickness: 10 – 25 µm
Flash-off at 20°C Flash off until mat after each spraycoat.
Drying at 20 °CDrying at 60 °C
approx. 15 min.approx. 10 min. + cooling down
Infrared 1st spraycoat:2nd spraycoat:
flash off at room temperature until mat.at 40 – 50°C (max 70°C) surface temperature to mat surface + cooling.
Technical Information90-IC 440
03/2017
Glasurit® 90 Interior Color SystemMetallics/Solids/Pearl Effects G / T
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application:Remarks: • Mixing formulas with 90-IC 440 mixing clear and mixing bases are available to cover the whole range
of colours needed in automotive refinishing.• Substrates/Pre-treatment:
Solvent-resistant old paintwork, e-coated substrates,Glasurit 285- or 801- primer fillers/surfacersClean surfaces with 700-1 / sand with P400 - P500 / clean again with 700-1.For e-coated substrates that are difficult to reach, cleaning with 700-1 is sufficient.
• Prime bare metal areas with Glasurit 183-70.• Mixing formulas that contain 90-M5, 93-E3, 11-E waterborne mixing bases or mixing base
concentrates 80-M cannot be used with 90-IC 440.
Paint system
Spreading rate: 130 m²/l at 1 μm
2 : 1 + 5 %
Mixing ratio 100% by vol. 90- Metallics/Solids(Replace 90-M4 by 90-IC 440 in the mixing formula.)
Reducer 50% by vol. 352-91, -50, -216, 352-10, -30, -405% by vol. 93-IC 330
Spray viscosityDIN 4 at 20°C
approx. 15 – 18 s Potlife at 20°C: 4 h
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar /0.7 bar at the nozzle
Compliant gravity-feed gun:1.3 – 1.4 mm, 2.0 bar
Number of spraycoats 2 Film thickness: 10 – 15 μm
Flash-off at 20°C Approx. 5 min. after each spraycoat.
Drying at 20°C Drying at 60°C
15 min.3 h20 min.
dust-free and ready for maskingready for assemblyready for assembly
Technical Information923-35
10/2011
Glasurit® HS Clear VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clear for 90 Line basecoat / clear coat systems.Properties: High solids content, excellent weathering resistance; outstanding finish, resistance to yellowing, hardness;
fast drying, polishing and tape resistance.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.
Paint system S 10
Spreading rate: 320 m²/l at 1 µm
Mixing ratio 2 : 1 + 10% 100% by vol. 923-35
Hardener 50% by vol. 929-33/-31/-34
Reducer 10% by vol. 352-91/-216
Spray viscosityDIN 4 at 20°C
20 -22 s Potlife at 20°C: 1 hour
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 - 60 µm
Flash-off at 20°C 3 minutes between spraycoats
Drying at 20 °CDrying at 60 °C
10 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-45
10/2011
Glasurit® HS Clear scratch resistant VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Extremely scratch-resistant HS clear 90 Line basecoat / clearcoat systems.Properties: High solids content; extremely scratch-resistant; outstanding weathering and yellowing resistance; excellent
finish quality; quickly ready for polishing and masking.Remarks: • Suitable for repairing extremely scratch-resistant original finishes.
• Select hardener and reducer according to ambient temperature and size of object to be painted.
Paint system S 10
Spreading rate: 335 m²/l at 1 µm
Mixing ratio 2 : 1 + 10% 100% by vol. 923-45
Hardener 50% by vol. 929-33/-31/-34
Reducer 10% by vol. 352-91/-216
Spray viscosityDIN 4 at 20°C
20 -22 s Potlife at 20°C: 1 hour
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 - 60 µm
Flash-off at 20°C 3 minutes between spraycoats
Drying at 20 °CDrying at 60 °C
10 h35 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-55
08/2018
Glasurit® MS Extra Matt Clear G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Two-pack clear for mat basecoat/clearcoat finishes.In order to achieve different gloss levels, you can mix the product with Glasurit 923-58 MS Clear matelastified. For further information, please refer to S12a "Mat Clear System / modified".
Properties: Extra mat, plasticisedRemarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.
• Suitable for the repair of extremely mat OEM finishes.• Suitable for finishing bumpers, etc.• Can be used without Softface Additive!• 923-55 must not be used in mixing shelves.
Technical Information923-55
08/2018
Glasurit® MS Extra Matt Clear G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system
Spreading rate: 240 m²/l at 1 µm
Mixing ratio 2 : 1100% by vol. 923-55
2 : 1+ 10% 100% by vol. 923-55
with VOC hardeners (weight):100 g. 923-55
Hardener 50% by vol. 929-97 50% by vol. 929-93,-91, -94
33 g. 929-31/-33/-34
Reducer 10% by vol. 352-91 17g. 352-91
Spray viscosityDIN 4 at 20°C
approx. 16 - 18 s Potlife at 20°C 4 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 - 50 µm
Flash-off at 20°C Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20min.Do not flash off for more than 25 min after each spraycoat.
Drying at 20 °CDrying at 60 °C
7 h30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-57
08/2018
Glasurit® MS Clear matt Flexible G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Two-pack clear for mat basecoat/clearcoat systems on plastics.In order to achieve different gloss levels, you can mix the product with Glasurit 923-55 MS Clear matelastified. For further information, please refer to S 12 "Mat Clear System".
Properties: Silky matt, elastified (gloss: 53 ± 5 at an angle of 60 degrees)Remarks: • Use hardeners and reducers depending on ambient temperature and size of object to be painted.
• Suitable for the repair of silky mat OEM finishes.• Suitable for finishing bumpers, etc.• No need to add Softface Additive!• 923-57 must not be used in mixing shelves.
Paint system
Spreading rate: 300 m²/l at 1 µm
Mixing ratio 2 : 1+ 10% 100% by vol. 923-57
with VOC hardeners (weight):100 g. 923-57
Hardener 50% by vol. 929-93/-91/-94 33 g. 929-31/-33/-34
Reducer 10% by vol. 352-91 17g. 352-91
Spray viscosityDIN 4 at 20°C
approx. 18-20 s Potlife at 20°C: 4 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 - 50 µm
Flash-off at 20°C Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for 10 - 15 min, after the second spraycoat for 15 - 20min.Do not flash off for more than 25 min after each spraycoat.
Drying at 20 °CDrying at 60 °C
8 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-58
08/2018
Glasurit® MS Clear matt Flexible G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)700: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 700 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Two-pack clear for mat basecoat/clearcoat systems on plastics.In order to achieve different gloss levels, you can mix the product with Glasurit 923-55 MS Clear matelastified. For further information, please refer to S 12a Mat Clear System / modified.
Properties: Silky matt, elastifiedRemarks: • Suitable for the repair of silky mat OEM finishes.
• Suitable for finishing plastics (e. g. bumpers, etc.).• 923-58 must not be used in mixing shelves.
Paint system
Spreading rate: 300 m²/l at 1 µm
Mixing ratio 2 : 1100% by vol. 923-58
2 : 1+ 10% 100% by vol. 923-58
with VOC hardeners (weight):100 gr. 923-58
Hardener 50% by vol. 929-97 50% by vol.929-93/-91/-94
33 gr. 929-31/-33/-34
Reducer 10% by vol. 352-91 17g. 352-91
Spray viscosityDIN 4 at 20°C
approx. 18-20 s Potlife at 20°C: 4 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 - 50 µm
Flash-off at 20°C Flash off until mat after each spraycoat and before baking.After the first spraycoat, allow to flash off for at least 10 - 15 min, after the second spraycoat for atleast 15 - 20 min.Do not flash off for more than 25 min after each spraycoat.
Drying at 20 °CDrying at 60 °C
8 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-115
10/2011
Glasurit® HS Universal Clear VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clear for 90 Line basecoat / clear coat systems.Properties: High solids content, safe to spray, excellent flow and levelling, fast drying, excellent surface hardness,
polishing behaviour and tape resistance.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.
Paint system S 10
Spreading rate: 330 m²/l at 1 µm
Mixing ratio 2 : 1 + 10% 100% by vol. 923-115
Hardener 50% by vol. 929-33/-31/-34
Reducer 10% by vol. 352-91/-216
Spray viscosityDIN 4 at 20°C
20 - 22 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
2 Film thickness: 40 - 60 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: approx. 50 microns
Flash-off at 20°C 3 minutes between spraycoats
Drying at 20 °CDrying at 60 °C
10 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-135
10/2011
Glasurit® HS Racing Clear VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clear for 90 Line basecoat/clearcoat systems.For use in quick repair jobs, especially on single panels or for Spot Repair.
Properties: Fast drying, excellent polishing behaviour.Remarks: • Select hardener, reducer and reducer percentage according to ambient temperature and size of
object to be painted.
Paint system
Spreading rate: 330 m²/l at 1 µm
Mixing ratio 2 : 1 + 10% 100% by vol. 923-135
Hardener 50% by vol. 929-31/-33
Reducer 10% by vol. 352-50/-91-/216 (depending on application conditions)
Spray viscosityDIN 4 at 20°C
18-20 s Potlife at 20°C 45 min. (929-31)
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
2 Film thickness: 40 - 60 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: 40 - 60 µm
Flash-off at 20°C 1-2 min. after first spraycoat
Drying at 60 °C Polishing929-31 = 20 min.929-33 = 25 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-335
10/2011
Glasurit® HS Multi Clear VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clear for 90 Line basecoat / clear coat systems.Properties: High solids content, safe to spray, excellent flow and good levelling, outstanding appearance for high-quality
automotive finishes. The product stands out for fast drying, excellent surface hardness, polishing behaviourand tape resistance.
Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.
Paint system S 10
Spreading rate: 330 m²/l at 1 µm
Mixing ratio 2 : 1 + 10% 100% by vol. 923-335
Hardener 50% by vol. 929-33/-31/-34
Reducer 10% by vol. 352-91/-216
Spray viscosityDIN 4 at 20°C
20 - 22 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
2 Film thickness: 40 - 60 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: approx. 50 µm
Flash-off at 20°C 3 minutes between spraycoats
Drying at 20 °CDrying at 60 °C
10 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information923-447
10/2011
Glasurit® HS Clear scratch-resistant VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Extremely scratch-resistant HS clear for 90 Line basecoat / clearcoat systems.Properties: High solids content; extremely scratch-resistant; outstanding weathering and yellowing resistance, excellent
finish quality, quickly ready for polishing and masking.Remarks: • Suitable for repairing extremely scratch-resistant original finishes.
• Select hardener and reducer according to ambient temperature and size of object to be painted.
Paint system
Spreading rate: 335 m²/l at 1 µm
Mixing ratio 2 : 1 + 10%100% by vol.
923-447
Hardener 50% by vol. 929-33/-31/-34
Reducer 10% by vol. 352-91/-216
Spray viscosityDIN 4 at 20°C
20 – 22 s Potlife at 20°C: 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 – 60 µm
Flash-off at 20°C 3 – 5 minutes between spraycoats
Drying at 20 °CDrying at 60 °C
10 h30 Min.
Infrared (short wave)Infrared (medium wave)
8 Min. 10 – 15 Min.
Technical Information923-610
09/2019
Glasurit® HS Clear fast-drying VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS Clear for 90 Line basecoats.For universal application in quick repair jobs on single panels up to a complete car side.
Properties: Fast drying, excellent polishing behavior and universal application.Remarks: • Select hardener, reducer and reducer percentage according to ambient temperature and size of
object to be painted.• Use reducer 352-70 only in combination with 929-63, -64 and with very high ambient temperatures
and infrared drying systems.
Paint system
Mixing ratio 3 : 1 : 1100 % by vol.
923-610
Hardener 33 % by vol. 929-61, -62, -63, -64
Reducer 33 % by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
18 - 21 s Potlife at 20 °C: 45 min.
Gravity cupSpraying pressure
Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar
HVLP-gravity-feed spray gun: 1.3 mm2.0 – 3.0 bar0.7 bar at the nozzle
Number of spraycoats 1 ½ without intermediate flash off2
Film thickness
40 - 60 µm
Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats
Drying at 60 °CDrying at 40 °CDrying at 20 °C
10 - 15 min. at panel temperature *30 - 45 min. at panel temperature *2 - 3 h with 523-65 Glasurit Air-Drying Additive * Drying times can be influenced by the selection of hardener, reducer and application. 523-15Glasurit Racing Additive can reduce drying times.
Infrared (short wave) 10 min.
Technical Information923-625
09/2019
Glasurit® HS Clear universal VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clearcoat for 90 Line basecoats.For universal application in quick repair jobs on single panels up to the complete car.
Properties: Clearcoat is safe to apply and easy to process and is therefore suitable for an especially large applicationspectrum.
Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.• Use reducer 352-70 only in combination with 929-63, -64 and with very high ambient temperatures
and infrared drying systems.
Paint system
Mixing ratio 3 : 1 : 1100 % by vol. 923-625
Hardener 33 % by vol. 929-61, -62, -63, -64
Reducer 33 % by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
18 - 21 s Potlife at 20°C 2 h
Gravity cupSpraying pressure
Compliant gravity-feed spray gun1.3 – 1,4 mm 2.0 bar
HVLP gravity-feed spray gun: 1.3 mm2.0 – 3.0 bar /0.7 bar at the nozzle
Number of spraycoats 1 ½ without intermediate flash off2
Film thickness
40 - 60 µm
Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats
Drying at 60 °CDrying at 40 °CDrying at 20 °C
25 min. at panel temperature *45 - 60 min. at panel temperature *7 h ** Drying times can be influenced by the selection of hardener, reducer and application. 523-15Glasurit Racing Additive can reduce drying times.
Infrared (short wave) 10 min.
Technical Information923-630
09/2019
Glasurit® HS Clear superior gloss VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clearcoat for 90 Line basecoats.For high-quality repair jobs on single panels up to the complete car.
Properties: Clearcoat with excellent flow and high purity for high-quality automotive finishes.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.
• Use reducer 352-70 only in combination with 929-63, -64 and with very high ambient temperaturesand infrared drying systems.
Paint system
Mixing ratio 3 : 1 : 1100 % by vol. 923-630
Hardener 33 % by vol. 929-61, -62, -63, -64
Reducer 33 % by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
18 - 21 s Potlife at 20°C 2 h
Gravity cupSpraying pressure
Compliant gravity-feed spray gun:1.3 - 1.4 mm 2.0 bar
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar 0.7 bar at the nozzle
Number of spraycoats 2 1 ½ without intermediate flash off
Film thickness 40 - 60 µm
Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats
Drying at 20 °CDrying at 60 °C
8 h *30 min. at panel temperature ** Drying times can be influenced by the selection of hardener, reducer and application. 523-15Glasurit Racing Additive can reduce drying times.
Infrared (short wave) 10 min.
Technical Information923-631
03/2020
Glasurit® HS clear coat superior gloss G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clearcoat for 90 Line basecoats.For high-quality repair jobs on single panels up to the complete car.
Properties: Clearcoat with perfect flow, premium gloss and brilliance for high-quality automotive finishes.Remarks: • Alternatively use 929-61, 929-63, 929-64 hardener.
• Select hardener and reducer according to ambient temperature and size of object to be painted.• 523-15 Glasurit Racing Additive can reduce drying times.
Paint system
Mixing ratio 3 : 1 : 1100 % by vol. 923-631
Hardener 33 % by vol. 929-68, -61, -63, -64
Reducer 33 % by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
18 - 22 s Potlife at 20°C 2 h
Gravity cupSpraying pressure
Compliant gravity-feed spray gun:1.3 - 1.4 mm 2.0 bar
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar 0.7 bar at the nozzle
Number of spraycoats 2 alternatively: 1 ½ without intermediate flash off
Film thickness 40 - 60 µm
Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats
Drying at 60 °C 30 min. at panel temperature
Infrared (short wave) 10 min.
Technical Information923-645
08/2015
Glasurit® HS Clear scratch-resistant VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS clearcoat for 90 Line basecoats for repairing scratch-resistant original finishes.Properties: Extremely scratch-resistant clearcoat with good polishability and outstanding finish quality.Remarks: • Select hardener and reducer according to ambient temperature and size of object to be painted.
Paint system
Mixing ratio 3 : 1 : 1100 % by vol.
923-645
Hardener 33 % by vol. 929-61, -63, - 64
Reducer 33 % by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
18 – 21 s Potlife at 20°C 1 h
Gravity cupSpraying pressure
Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar 0.7 bar at the nozzle
Number of spraycoats 2 1 ½ without intermediate flash off
Film thickness 40 – 60 µm
Flash-off at 20°C app. 3 min. intermediate flash off between the application of two spraycoats.
Drying at 20 °CDrying at 60 °C
10 h *30 min. at panel temperature ** Drying times can be influenced by the selection of hardener, reducer and application.
Infrared (short wave)Infrared (medium wave)
8 min. 10 – 15 min.
Technical Information923-666
01/2015
Glasurit® Clear VOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Polyurethane clear for basecoat/clearcoat systemsProperties: Clear with a high solids content; suitable for use in all vehicle refinishing processes.Remarks: Use Glasurit 929-666 Hardener VOC.
Paint system
Spreading rate: 311 m²/l at 1 µm
Mixing ratio 2 : 1 200% by vol. 923-666
Hardener 100% by vol. 929-666
Reducer
Spray viscosityDIN 4 at 20°C
20 - 22 s Potlife at 20°C: 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
2 Film thickness: 40-60 µm
Number of spraycoats ½ + 1 spraycoatcan be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: approx. 50 µm
Flash-off at 20°C 3 minutes between spraycoats
Drying at 20 °CDrying at 60 °C
10 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information925-2002
10/2011
Glasurit® HS Clear ultra scratch-resistantVOC G / C
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)419: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Ultra scratch-resistant HS clear for 90 Line basecoat / clearcoat systems.Properties: High solids content; ultra scratch-resistant; long-term gloss retention, outstanding weathering resistance,
excellent finish quality, very quickly ready for polishing.Remarks: • Suitable for repairing ultra scratch-resistant original finishes.
• Select reducer according to ambient temperature and size of object to be painted.
Paint system
Spreading rate: 335 m²/l at 1 μm
Mixing ratio 100 g 925-2002
Hardener 40 g 929-2002
Reducer 20 g 352-91/-216 /-370
Spray viscosityDIN 4 at 20°C
20 – 22 s Potlife at 20°C: 1 h
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1.3 mm 2.0 – 3.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 – 1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: 40 – 60 μm
Flash-off at 20°C 3 – 5 minutes between spraycoats
Drying at 60 °C 40 min.
Infrared (short wave)Infrared (medium wave)
10 min.10 – 15 min.
Technical Information90-M5
10/2011
Glasurit® Tri-coat Additive G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Additive for 3step colours used in 90 Line mixing formulas to produce translucent effects.
Paint system
Mixing ratio 90 Line Metallics/Solids (acc. to mixing formula)100% by vol. 90- (mixingformula incl. 90- M5)
Reducer 50% by vol. 93-E3 or 93-E3 slow Adjusting Base(stir IMMEDIATELY after having added adjusting base)
Spray viscosityDIN 4 at 20°C
18 –24 s
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 + ½ to match effect Film thickness: 10 - 15 µm
Flash-off at 20°C approx. 5 minutes after each spraycoat
Intermediate dryingDrying at 20°CBlow dry with Dry Jet
Flash off until mat after each spraycoat.
Technical Information90-M50
10/2011
Glasurit® Blending Clear G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(d)(420)419: The EU limit value for this product ( product category: IIB.d ) in ready to use form is max 420 g/litre of VOC. The VOC content ofthis product is 419 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Glasurit® 90-M50 Blending Clear is used for blending in metallic and solid colour Glasurit® 90 Line water-borne basecoats.
Properties: It helps to achieve a smooth homogeneous overspray area in the fade-out zone, avoiding dark shadowsaround the repair area.
Remarks: • The spray gun can be used for 90-M50 Blending Clear and 90 Line Basecoat without having to becleaned in between.
Paint system S 9, S 9.1, S 9.2
Mixing ratio 2 : 1, use mixing stick100% by vol. 90-M50
Reducer 50% by vol. 93-E3 or 93-E3 slow Adjusting Base(stir IMMEDIATELY after having added adjusting base)
Spray viscosityDIN 4 at 20°C
18 – 22 s
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats Application without intermediate flash off time with two coats. In this case the second coat willoverlap the first coat to achieve a smother edge.
Flash-off at 20°C none
Technical Information581-90
08/2019
Glasurit® Guide Coat black G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)650: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 650 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Glasurit® 581-90 Guide Coat, black can be used on filler surfacer and primer filler coats and also onpolyester body fillers as a visual means to check sanding results.
Properties: Guide coat supplied in an aerosol can
Paint system
Spreading rate:
Shaking 2 min.
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Number of spraycoats 1-2 mist coats
Technical Information700-1
10/2011
Glasurit® Cleaner G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(a II)(200)198: The EU limit value for this product ( product category: IIB.a II ) in ready to use form is max 200 g/litre of VOC. The VOCcontent of this product is 198 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: 1. Glasurit 700-1 Cleanerto clean surfaces and blend-in areas prior to the application of Glasurit 176-72 1C Primer Filler and Glasurit90 Line metallic or solid colour basecoat.The cleaner acts as an anti-static agent and reduces dust settling during topcoat application on plastic parts.Can be used to clean sprayguns.Rinse clean spraying equipment with 700-1 Cleaner.
ApplicationSoak a lint-free cloth with 700-1 and wipe the surfaces to be refinished or spray 700-1 onto the surfacesto be refinished and wipe them with a lint-free cloth.
Properties: • Good cleaning properties• Anti-static effect (for plastics refinishing)
Remarks: Glasurit 700-1 Cleaner• to clean substrates before applying Glasurit 176-72- 1C Primer Filler or Glasurit 90 Line metallic or
solid colour basecoat;• to clean substrates after fine sanding of surfaces primed with Glasurit 176-72- 1C Primer Filler;• is used as an anti-static agent prior to topcoat application (especially on plastic parts);• to clean sprayguns before they are used to apply Glasurit 176-72- 1C Primer Filler or Glasurit 90
Line metallic or solid colour basecoat.
Paint system RATIO Aqua
Technical Information700-10
10/2011
Glasurit® Degreasing and cleansing agent G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(a II)(200)186: The EU limit value for this product ( product category: IIB.a II ) in ready to use form is max 200 g/litre of VOC. The VOCcontent of this product is 186 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: 1. Glasurit 700-10 Degreasing and cleansing agent to clean surfaces to be refinished. Removes silicone, grease and wax residues from surfaces as well asmould release agents from plastic surfaces.When cleaning plastic surfaces, the cleaner produces an anti-static effect and thus reduces dust settling.
ApplicationSoak a lint-free cloth with 700-10 and wipe the surfaces to be refinished or spray 700-10 onto the surfacesto be refinished and wipe them with a lint-free cloth.
Properties: • Good cleaning properties• Anti-static effect (for plastics refinishing)
Remarks: Glasurit 700-10 Degreasing and cleansing agent• to clean surfaces to be refinished of silicone, grease and oil residues; heavily soiled vehicles should
be washed before being refinished;• to clean plastic surfaces of mould release agents that might impair adhesion.
Paint system RATIO Aqua
Technical Information700-7
10/2011
Glasurit® Coagulating powder G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: When using water-borne products such as:• Glasurit® 90 Line Basecoat, Metallics/Solids• Glasurit® 176-72 1K Primer Filler• Glasurit® 1109- Stone Chip and Underbody Protection• Glasurit® 1109- Texture Finishthe water used to clean working tools should be collected in suitable containers.These containers must not get in touch with solvents.
Use of 700-7 Coagulating Powder: Add 2 or 3 scoops of 700-7 Coagulating Powder (approx. 75 g) perabout 10 litres waste water (scatter the powder to distribute the particles evenly and to increase efficiency)and stir briefly.
After a short interval, the solids will start to coagulate and can then be separated from the liquid by filtering,for example through filter mats or appropriate sieves (with a mesh size of about 80-100 microns).
When the contaminant concentration in the waste water is very high (i.e., when the water has not becomeclear after about 15 minutes), add more 700-7 Coagulating Powder. There is no risk of overdosing with700-7.
The coagulated substance must be disposed of in the same way as solvent-borne paint waste. The clear,aqueous phase may be discharged into the public sewage system subject to local waste-water regulations.When you are not sure, consult the competent local authorities.
Properties: • Glasurit® 700-7 Coagulating Powder is used to precipitate solids from the water used to cleanworking tools with which water-based products were processed.
• Once the coagulated substance has been separated, the clear, aqueous phase can be used againfor pre-cleaning sprayguns, which are finally rinsed with fresh tap water.
Paint system RATIO Aqua
Technical Information1109-
10/2011
Glasurit® Stone chip and underbodyprotection G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)46: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 46 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Underbody and stone chip protection product or sealerProperties: • 1109-1240/6 ready for use, available in 1-litre cans, apply with Compliant gravity-feed spray gun
• 1109-1240/4 and 1109-1503/3 paste-like apply with special gun or airless pumps• 1109- can be recoated
Remarks: • Seal body-filled areas with Glasurit® 283- primer fillers.• Clean working tools with water immediately after use.• Remove overspray within 30 min. using a wet sponge or 352-91 Reducer.• 1109- can also be used as a sealer on bleeding old paintwork, peroxide patches and TPA substrates.• Underbody protection
airless: nozzle 0.41-0.5 mm, pressure 120-180 bar (1800 – 2700 p.s.i.)pressure pot: 2-3 mm nozzle, atomisation pressure: 3-6 bar (45-90 p.s.i.);material pressure depends on desired texture
Application Underbody protection Stone chip protection
Paint system
Spreading rate 450 m²/l at 1 micron 466 m²/l at 1 micron
Reducer water, if required max. 5% water, if required
Spray viscosityDIN 4 at 20°C
ready for use 20 s
Gravity cupSpraying pressure
HVLP gun: 1.9 mm 2.0-3.0 bar (30-45 p.s.i.) /0.7 bar (10 p.s.i.) at the nozzle
Number of spraycoats 4 - 6 1 - 2
Film thickness 500-1.000 microns 40-50 microns
Drying at 20 °CDrying at 60 °C
6 hours45 – 60 min.
2 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
8 min.10 - 15 min.
Technical Information352-450
10/2011
Glasurit® Blend-in Reducer G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: • Blend-in reducer for 923- clears and 22 Line VOC topcoats.• Blend-in reducer to melt in overspray / overlap areas or to melt in clear coat/topcoat fade-out areas
in blend-in repairs.
Paint system S 7a, S 9
Spray viscosityDIN 4 at 20°C
ready for use
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats 2 or 3 (clear coat / topcoat fade-out areas)
Drying As recommended for the Glasurit clear used.
Technical Information352-500
10/2011
Glasurit® Spot-Blender G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: A specific combination of solvents used to melt in clear coat fade-out areas in spot repairs or when fadingout the clear in blend-in repairs.
Remarks: The product can be supplied in a standard product container for spraygun application and also in an aerosolcan.
Paint system Glasurit Spot-Repair
Spray viscosityDIN 4 at 20°C
ready for use
Gravity cupSpraying pressure
HVLP minijet gun: 0.8 - 1.0 mm Compliant gravity-feed gun1.3 mm, 2.0 bar
Number of spraycoats 2 or 3 spraycoats to the clear coat fade-out areas to melt them in.
Drying As recommended for the Glasurit clear used.
Technical Information352-500 AE
08/2019
Glasurit® Spot-Blender - aerosol can G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(e)(840)839: The EU limit value for this product ( product category: IIB.e ) in ready to use form is max 840 g/litre of VOC. The VOC content ofthis product is 839 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: A specific combination of solvents used to melt in clear coat fade-out areas in spot repairs or when fadingout the clear in blend-in repairs.
Paint system S 9, Glasurit Spot-Repair
Note Do not use deformed aerosol cans. While shaking the can, do not strike against solid objects.During shaking, the mixing balls are released. Avoid bumps, friction and impact.
Spray viscosityDIN 4 at 20°C
ready for use
Number of spraycoats 2 or 3 spraycoats to the clear coat fade-out areas to melt them in.
Drying As recommended for the Glasurit clear used.
Technical Information360-100
08/2015
Glasurit® PRO Active Wipes G / X
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.2004/42/IIB(c III)(780)8: The EU limit value for this product ( product category: IIB.c III ) in ready to use form is max 780 g/litre of VOC. The VOC contentof this product is 8 g/litres.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Glasurit® PRO Active Wipes are intended for use on cleaned bare metal surfaces such as steel, galvanizedsteel and aluminum.
Properties: Thanks to their chemical reaction in contact with metal surfaces, Glasurit® PRO Active Wipes increase thecorrosion resistance and adhesion of the paint system to be applied.
Remarks: • Recoatable with all Glasurit® undercoat materials, except polyester body filler and waterborneproducts (176-72).
• Do not overcoat directly with basecoat or topcoat.• If you want to reuse used wipes during the same working day, store them in a container or in a
resealable plastic bag. This will protect the wipes from drying out. Do not return used wipes to theoriginal packaging.
Paint system Observe process-related regulations. Use on cleaned bare metal surfaces only.
Spreading rate: per cloth max. 3m2
Carefully seal container Close the container immediately after removing a PRO Active Wipe to protect the other wipesfrom drying out.
Cleaning 700-10, 700-1 (see relevant refinishing system)
Application Evenly wet the entire bare metal surface with 360-100.(Wipe with overlapping single cross coats).The surface must stay moist for at least 1 minute. This is imperative for the chemical reaction tocomplete and form a passivation layer.
Flash-off at 20°C Matt surfaceMax. 8 h
Can be overcoated with all Glasurit® undercoat materials, see technical data sheet or refinishingsystem
Technical Information522-10
01/2015
Glasurit® plastic additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Additive which makes Glasurit Non-Sanding-Filler suitable for direct application to all paintable plasticsubstrates normally used in the automotive industry.
Properties: good miscibilityRemarks: • No addition for painting of GRP necessary
• The product can also be applied to adjacent e-coated new parts, if necessary.• The addition of 522-10 does not produce adhesion to unpaintable pure polypropylene (PP) and
polyethylene (PE)
Paint system S 3
Mixing ratio 3 : 1 : 1100% by vol.
285-31, -38, -49, -95, -0
Hardener 33% by vol. 929-56, -55
Reducer 33% by vol. 522-10
Spray viscosityDIN 4 at 20°C
14 – 20 s Potlife at 20°C 1 – 2 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun:1,3 mm 2,0 – 3,0 bar / 0,7 bar at the nozzle
Compliant gravity-feed spray gun:1,3 – 1,4 mm 2,0 bar
Number of spraycoats ½ + 1 (body filled area / entire surface)Film thickness: 20 – 35 μm
2Film thickness: 40 – 60 µm
Flash-off at 20°C 15 – 20 min. -
Drying at 60 °C - 25 Min.
Sanding: manual - P500 - P800
Sanding: orbital sander - P400 - P500
Technical Information522-55
03/2018
Glasurit® Air-Drying Primer Filler Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Anwendung: Additive for accelerated air drying of Glasurit® 2 component primer fillers on vertical and horizontal surfaces.Using 522-55 will allow for a dust-free surface more quickly. Sandability and readiness for assembly willbe significantly improved. 522-55 is particularly suited for bodyshops who want to save energy and dry theprimer filler at room temperature. 522-55 can help to reduce the occupation times of the combi-booth anddrying oven. 522-55 is particularly suited for small repairs.
Eigenschaften: Shorter drying time at room temperature.Improved surface drying and curing.
Anmerkungen: Use 522-55 Glasurit Air-Drying Primer Filler Additive only at room temperature >20°C.Ambient temperature and film build can greatly affect the drying behaviour.522-55 is intended for use only in 285-505, -555 and -655.522-55 will reduce the potlife.
Paint system Primer Filler
Mixing ratio 4 : 1 : 1100 Vol. %
285-505285-555285-655
Hardener 25 Vol. % 929-55
Reducer 25 Vol. % 522-55
Spray viscosityDIN 4 at 20°C
Potlife 20°C: 35 min.
Gravity cupSpraying pressure
Refer to the technical data sheet of the product in which 522-55 is used.
Number of spraycoats 2 Film thickness: ca. 50 - 70 µm
Drying at 20 °C ca. 40 Min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information522-78
03/2019
Glasurit® Brush- and Roll Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Additive to be used when 22 Line VOC, 22 VOC MC600 is applied by brush or rollProperties: For brush and roller application, mix 22 Line VOC, 22 VOC MC600 topcoats with 929-13 only.
Other hardeners will thin the product too much. 522-78 improves the flow properties of 22 Line VOC topcoatsand prevents aeration in the applied film.
Remarks: • Only partly suitable when large areas are to be refinished as ready-for-use material dries very faston the surface.
Paint system
Mixing ratio 100 % by vol. 22 Line VOC, 22 Line VOC MC600
Hardener 33 % by vol. 929-13
Reducer 5 % by vol. 522-78
Potlife at 20 °C 1 h
Number of coats 2 - 3
Film thickness 50 – 70 μm
Drying at 20 °CDrying at 60 °C
8 hours30 min.
Infrared (short wave)Infrared (medium wave)
8 min. 10 – 15 min.
Technical Information522-111
11/2017
Glasurit® Soft face Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Plasticising additive used in plastics refinishing proceduresProperties: Elastified, good miscibilityRemarks: • Addition of 25% by vol.
Application Undercoat materials Topcoat/clear
Paint system S. 3, S. 3a
Mixing ratio 4 parts. 285- (100% byvol.)1 part. 522-111 (25%by vol.)
4 parts 22 VOC 923-(100% by vol.)1 part 522-111 (25% byvol.)
4 parts 22 VOC MC600 (100% by vol.)1 part 522-111 (25% by vol.)
Hardener 4 : 1 : 1 100% by vol. 285- :522-11125% by vol. 929-55,-56
2 : 1 + 10 % 100% by vol. 22VOC /923- : 522-11150% by vol. 929-31,-33
3 : 1 : 1100% by vol. 22 VOC MC600 / 923- : 522-11133% by vol. 929-61, -63, -64
Reducer 25% by vol. 352-91,-50
10% by vol. 352-91,-50
33% by vol. 352-10, -30, -40
Spray viscosityDIN 4 at 20°C
16 - 18 s 22 VOC,22 MC600923-
20 - 22 s 17 - 18 s
Potlife at 20 °C 1 - 2 hours 4 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.7 - 1.9 mm2.0 –3.0 bar0.7 bar at the nozzle
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Number of spraycoats 2 2
Film thickness approx. 50 µm 50-60 µm
Drying at 20 °CDrying at 60 °C
4 hours40 min.
16 hours45 min
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
8 min.10 - 15 min.
Technical Information522-322
09/2018
Glasurit® HS Flexible Matting agent G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: HS matting agent for 22 Line VOC Topcoat, 22 VOC MC600 and 923- clearsProperties: Easy to mixRemarks: • Also for use on plastics, without addition of 522-111 Glasurit Softface Addtive
• Prepare only the quantity of paint that will be used the same day because the gloss level may changewhen the mixture is stored!
• 522-322 must not be used in mixing shelves.Stir immediately after adding Glasurit® 522-322 HS Matting Agent!
Application 22 Line VOC Topcoats, 22 VOC MC600 923-Clears
Paint system
Step 1:Mixing ratio
semi-gloss100% by weight 22 Line VOC25% by weight 522-322satin gloss100% by weight 22 Line VOC35% by weight 522-322silky matt100% by weight 22 Line VOC45% by weight 522-322
semi-gloss100% by weight 923-25% by weight 522-322satin gloss100% by weight 923-50% by weight 522-322silky matt100% by weight 923-70% by weight 522-322
Step 2:Mixing ratio
3 : 1 : 1100% by vol. 22 VOCMC600
2 : 1 + 10%100% by vol. 22 Line VOC, 923-
Hardener 33% by vol. 929-61,-63, -64
50% by vol. 929-31/-33
Reducer 33% by vol. 352-10,-30, -40
10% by vol. 352-50/-91/-216
Spray viscosityDIN 4 at 20°C
20 - 22 s Potlife at 20°C: 2 - 3 hours
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness: approx. 50-70 µm
929-33, -63: 929-31, -61:
Drying at 20 °CDrying at 60 °C
8 hours30 min.
6 hours20 min
Infrared (short wave)Infrared (medium wave)
8 min.10 - 15 min.
Technical Information522-345
09/2018
Glasurit® Texture additive Fine G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Texturing, elastifying and matting agent to be used, for example, when FORD bumpers are to be refinished.For use on hard plastics the product can be mixed 1:1 with 22 Line VOC, 22 VOC MC600 Topcoat or 2:1with 923- clears.
Remarks: • Do not strain the material.• 522-345 must not be used in mixing shelves.
Paint system 22 Line VOC, 22 VOC MC600 Topcoats / 923- Clears
Weight in according to mixing formula orStep 1:Mixing ratio
100% by vol. 22 VOC, 22 VOC MC600100% by vol. 522-345
100% by vol. 923-50% by vol. 522-345
Step 2:Mixing ratio
3 : 1 : 1100% by vol. 22Line VOC MC600 /923- : 522-345
2:1 + 10%100% by vol. 22 Line VOC / 923- : 522-345
Hardener 33% by vol. 929-61,-63, -64
50% by vol. 929-31, -33
Reducer 33% by vol. 352-10,-30, -40
10% by vol. 352-50, -91
Spray viscosityDIN 4 at 20°C
16-18 seconds Potlife at 20°C:6 hours (with 929-33, -63)4 hours (with 929-31, -61)
Gravity cupSpraying pressure
HVLP-gravity-feed spray gun: 1.3 mm 2.0 – 3.0bar0.7 bar at the nozzle
Compliant gravity-feed spray gun:1.3 -1.4 mm 2.0 bar
Number of spraycoats 2 Film thickness 50 – 70 µm
929-33, -63: 929-31, -61:
Drying at 20 °CDrying at 60 °C
10 hours30 min.
6 hours20 min.
Infrared (short wave)Infrared (medium wave)
8 min.10 -15 min.
Technical Information523-15
11/2017
Glasurit® Racing Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Drying accelerator for Glasurit standard clears (VOC-compliant and non-VOC-compliant), 22 Line, 22 LineVOC, 22 VOC MC600 and 285- HS-Primerfiller / Filler
Properties: • Reduction of drying times• Improves surface drying and curing performance as well as tape resistance
Properties: No add of 523-15 Racing Additive in 285- Primerfiller / Filler at temperatures > 25°C possible, due to tooshort potlife
Paint system Clear coat
2 : 1 + 10 % VOC-compliant clear
Mixing ratio 100% by vol. 923-35923-115923-135923-335
Hardener 50% by vol. 929-31, -33
Reducer 10% by vol. 523-15
Spray viscosityDIN 4 at 20°C
16 – 22 s, depending on product used Potlife at 20°C:45 - 120 min., depending on product used
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats ½ + 1 Film thickness:
40 - 60 µm
Drying at 20 °C 923-135923-35, -115, -335
1 h4 h
Drying at 60 °C 923-135923-35, -115, -335
15 min.20 min.
Infrared (short wave)Infrared (medium wave)
6 min.8 - 12 min.
Technical Information523-15
11/2017
Glasurit® Racing Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Clear coat
3 : 1 : 1 VOC-compliant clear
Mixing ratio 100% by vol. 923-610923-625923-630
Hardener 33% by vol. 929-61, -63
Reducer 33% by vol. 523-15
Spray viscosityDIN 4 at 20°C
18 – 21 s, depending on product used Potlife at 20°C: 30 - 120 min.,depending on productused
Gravity cupSpraying pressure
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
HVLP gun: 1.3mm2,0 - 3.0 bar / 0.7 bar at the nozzle
Number of spraycoats ½ + 12
Film thickness: 40 - 60 µm
Flash-off at 20°C approx. 2 min between spray coats
923-610 923-625 923-630
Drying at 60 °CDrying at 40 °CDrying at 20 °C
10-15 min, improved polishability30 min3 - 4 h
15 - 20 min30 - 45 min4 h
20 min-4 h
Technical Information523-15
11/2017
Glasurit® Racing Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system 22 Line VOC
2 : 1 + 10 %
Mixing ratio 100% by vol. 22 Line VOC
Hardener 50% by vol. 929-31, -33
Reducer 10% by vol. 523-15
Spray viscosityDIN 4 at 20°C
app. 20 - 24 s Potlife at 20°C: 30 min.
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
2intermediate flash off app. 5 min.
Film thickness: 50 - 70 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: app. 50 µm
Drying at 20 °C 4 h
Drying at 60 °C 20 min.
Infrared (short wave)Infrared (medium wave)
6 min.8 - 12 min.
Technical Information523-15
11/2017
Glasurit® Racing Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system 22 VOC MC600
3 : 1 : 1
Mixing ratio 100% by vol. 22 VOC MC600
Hardener 33% by vol. 929-61, -63
Reducer 33% by vol. 523-15
Spray viscosityDIN 4 at 20°C
app. 20 - 24 s Potlife at 20°C: 30 min.
Gravity cupSpraying pressure
HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
2intermediate flash off app. 5 min.
Film thickness: 50 - 70 µm
Number of spraycoats ½ + 1can be applied to vertical surfaces (no flash-offbetween coats required)
Film thickness: app. 50 µm
Drying at 20 °C 4 h
Drying at 60 °C 20 min.
Infrared (short wave)Infrared (medium wave)
6 min.8 - 12 min.
Technical Information523-15
11/2017
Glasurit® Racing Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system HS-Primerfiller / Filler
4 : 1 : 1 HS-Primerfiller 3 : 1 : 1 Non-Sanding-Filler
Mixing ratio 100% by vol. 285-505285-555285-655
100% by vol. 285-31285-38285-49285-95285-0
Hardener 25% by vol. 929-55, -56 33% by vol. 929-56 / -55
Reducer 25% by vol. 523-15 33% by vol. 523-15
Spray viscosityDIN 4 at 20°C
14 – 22 s, depending on product used Potlife at 20°C:30 – 60 min., depending on product used
HVLP gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
HVLP gun: 1.3 mm2.0 – 3.0 bar / 0.7 bar at the nozzleGravity cup
Spraying pressure Compliant gravity-feed gun1.6 – 1.8 mm, 2.0 bar
Compliant gravity-feed gun1.3 – 1.4 mm, 2.0 bar
Number of spraycoats 2 Film thickness: 50 – 70 μm
½ + 1 Film thickness: 20 – 35 μm
Drying at 20 °C 1,5 h 10 min. (*)
Drying at 60 °C 10 min. -
Infrared (short wave) 4 min. -
Sanding: manual P400 - P600 (*) If the recommended drying time is exceededby more than 20 min, the panel has to be lightlyscuff-sanded.
Sanding: orbital sander P400 - P500 -
Technical Information523-15
11/2017
Glasurit® Racing Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system Primerfiller
4 : 1 : 1
Mixing ratio 100% by vol. 285-700285-730285-790
Hardener 25% by vol. 929-55, -56
Reducer 25% by vol. 523-15
Spray viscosityDIN 4 at 20°C
20 – 24 s, depending on product used Potlife at 20°C: 20 min
Gravity cupSpraying pressure
HVLP gun: 1.7 – 1.9 mm2.0 – 3.0 bar / 0.7 bar at the nozzle
Compliant gravity-feed gun1.6 – 1.8 mm, 2.0 bar
Number of spraycoats 2 Film thickness: 50 - 70 µm
Drying at 20 °C 1,5 h
Drying at 60 °C 15 min.
Infrared (short wave) 6 min.
Sanding: manual P800
Sanding: orbital sander P400 - P500
Technical Information523-65
12/2015
Glasurit® Air-Drying Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Additive for accelerated air drying of Glasurit® 2 component standard VOC clearcoats on vertical andhorizontal surfaces.Using 523-65 will allow for a dust-free surface more quickly. Sandability, polishability and readiness forassembly will be significantly improved. 523-65 is particularly suited for bodyshops who want to save energyand dry the clearcoat at a panel temperature below 60°C. 523-65 can help to reduce the occupation timesof the combi-booth and drying oven. 523-65 is particularly suited for small repairs.
Properties: Shorter drying time at room temperatureImproved surface drying, curing and polishability
Remarks: Use Glasurit 523-65 Air-Drying Additive at room temperature > 20°C only.Ambient temperature and film build can greatly affect the drying behavior.523-65 is intended for use only in 923- 610, -625, -630.523-65 will reduce the potlife.
Technical Information523-65
12/2015
Glasurit® Air-Drying Additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Paint system Clearcoat
Mixing ratio 3 : 1 : 1100 Vol. %
923-610923-625923-630
Hardener 33 Vol. % 929-61
Reducer 33 Vol. % 523-65
Spray viscosityDIN 4 at 20°C
Depending on the product 18 - 21 s Potlife 20 °C: Depending on theproduct 30 - 60 min.
Gravity cupSpraying pressure
Refer to the technical data sheet of the productin which 523-65 is used.
Number of spraycoats 1 ½ without intermediate flash-off time Film thickness approx. 50 µm
Drying 923-610Dust-free afterPolishable after 923-625Dust-free afterPolishable after 923-630Dust-free afterPolishable after * Spraybooth incirculating air modes** Waiting time at roomtemperature aftersurface drying in theoven
20º C 20 - 30 min *2 - 3 h 25 - 35 min *3 - 4 h 35 - 45 min *4 h
40º C 10 - 15 min1 h ** 15 - 20 min1.5 h ** 20 - 25 min2 h **
60º C < 10 min1 h ** 10 - 15 min1.5 h ** 15 - 20 min2 h **
Technical Information580-100
11/2017
Glasurit® Anti-silicone additive G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Used to avoid craters caused by silicones (wetting defects)Remarks: • Never add 580-100 inside the spray booth. Immediately remove cloths soiled with Antisilicone
Additive• When you have used 580-100 Antisilicone Additive in the first coat, you must use it in all following
coats as well (at least the same volume).• Do not use 580-100 in Glasurit VOC clears and 22 Line HS 2K Topcoat, VOC, 22 VOC MC600!
Paint system
Mixing ratio Add 2% to max. 5% of 580-100 to the RFU topcoat.
Hardener
Reducer
Technical Information929-
10/2011
Glasurit® Hardener Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Hardeners for two-pack productsProperties: • 929-13 for brushing 22, 22 VOC Line Topcoat ( 522-78 Glasurit® Brush and Roll Additive )Remarks: • Seal cans with left-over material carefully!
• Hardeners are sensitive to humidity!• See Technical Information sheets for base products.
Technical Information929- HS
10/2011
Glasurit® HS Topcoat Hardener / HS FillerHardener G
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: Glasurit HS topcoat hardenersto be mixed with Glasurit 22 Line topcoats and Glasurit 923- clears
• 929-93 RATIO System• 929-91 quick panel repairs, low temperatures• 929-94 very large areas, high temperatures (> 30°C)
Glasurit HS filler hardenersto be mixed with Glasurit 285- undercoat materials
• 929-55 Glasurit HS Hardener, fast• 929-56 Glasurit HS Hardener, normal
Remarks: • Seal cans with left-over material carefully!• Hardeners are sensitive to humidity!• See Technical Information sheets for base products.
Technical Information929- VOC
03/2018
Glasurit® Hardener VOC G / Z
Safety advice:The products are suitable for professional use only.It cannot be ruled out that this product contains particles < 0.1 µm.The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and applicationof our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certainproperties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein arefor general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (productspecification). The latest version supersedes all previous versions. You can obtain the latest version from our website at http://techinfo.glasurit.com or directly fromyour sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
BASF Coatings GmbH - Automotive Refinish Coatings Solutions Europe - Glasuritstrasse 1 - 48165 Münster - Germany
Application: • Hardeners for VOC-compliant (420 g/l) clears and topcoatsProperties: • 929-33 VOC Hardener normal
• 929-31 VOC Hardener fast• 929-34 VOC Hardener slow
Hardeners for VOC-compliant clears 923-610, -625,- 630, -645,22 Line HS 2K Topcoat VOC MC600
• 929-63 VOC Hardener normal• 929-61 VOC Hardener fast• 929-64 VOC Hardener slow
Remarks: • Seal cans with left-over material carefully!• Hardeners are sensitive to humidity!• See Technical Information sheets for base products.