Car Body Painting 2013 - European Coatings · 30 years of automotive coating – quo vadis? Three...
Transcript of Car Body Painting 2013 - European Coatings · 30 years of automotive coating – quo vadis? Three...
Automotive CircleInternational
Car Body Painting2013
30th Workshop of the 1st German Automotive Circle
4 – 5 November 2013Bad Nauheim
Germany
Media-Partner
EXCLUSIVE!Car Body Presentations:\\ Audi\\ BMW\\ Opel
30 years of automotive coating – quo vadis? Three decades of “Car Body Painting” – that adds:
\\ up to more than 700 technical presentations,
\\ over 5000 participants and
\\ 30 intensive information-sharing gatherings in Bad Nauheim under the auspices of the leading European network for automotive experts.
But this year’s anniversary event will not be an occasion for wallowing in the past. Instead, it will cast an eye on the future of the automotive paint shop. The 2013 annual Automotive Circle International Conference on “Car Body Painting” will again address the key drivers of the sustainable paint shop with the participation of international automotive engineering experts in Bad Nauheim.
As it celebrates its 30th anniversary, “Car Body Painting 2013” will focus on:
\\ Learning from experiences gained from current projects,
\\ factoring important insights into future systems planning,
\\ fi nding out about the strategies adopted by makers of process materials and equipment,
\\ engaging with international OEMs in discussions on upcoming challenges in automotive surface treatment, and
\\ laying the foundations for radically designing effective paint shops.
Take part in these trailblazing discussions, we are looking forward to meeting you in Bad Nauheim!
Andrea HuberPresidiumAutomotive Circle International
Andrea Huber
International OEM Board
Bernhard Woll AUDI AG, DE
Alfred RutkaBMW Group, DE
Dr. Rolf SpechtDaimler AG, DE
Michael KleinAdam Opel AG, DE
Thomas MaiDr. Ing. h.c. F. Porsche AG, DE
Reinhard AlbertsVolkswagen AG, DE
www.automotive-circle.com Conference Board
Roland GöpfertFord-Werke GmbH, DE
Peter Larsson Volvo Car Corp., SE
Consulting
Karl-Heinz Heinel Dr. Klaus-Werner Thomer
Stefano Maggi Fiat Group Auto-mobiles S.p.A., IT
Chris GlobeJaguar Land Rover, GB
Christophe Gruat PSA Peugeot Citroën S.A.S, FR
Jean-Noël Deteix Renault S.A.S, FR
International Guest Board
Regular updates, detailed programme and online registration at:
www.automotive-circle.com
www.automotive-circle.com Conference Programme
\\ talk to leading OEM representatives and the members of the inter- national advisory OEM board.
\\ form your own impressions of current surface trends by attending the live presentations of various car bodies.
\\ expand your network – „Car Body Painting“ will once again draw expert engineers from the ranks of the international automotive industry to Bad Nauheim.
\\ gain an overview of technologies emerging from international subcontractors.
\\ learn from the fi ndings of recently completed projects on sustain- able automotive paint shops.
The conference is aimed at:Paint shop management/planners, divisional managers, department managers and strategic managers in auto-motive manufacturers, suppliers (Tier 1 / Tier 2) and their service providers such as paint manufacturers, chemicals manufacturers, plant builders, and consultants
5 GOOD REASONS TO PARTICIPATE – YOU WILL HAVE AN OPPORTUNITY TO
PLUS
IMPULSE
Regular updates, detailed programme and online registration at:
www.automotive-circle.com
SUNDAY, 3 NOVEMBER 2013
17.00 h Conference registration
18.00 h Welcome reception
19.00 h Traditional Dinner– by invitation of the Automotive Circle International –
MONDAY, 4 NOVEMBER 2013
8.30 h Welcome
9.00 h Could should would – what does mobility look like in the megacities of the future?Jürgen Mayer H., DE
Session I INNOVATION MANAGEMENT – PEOPLE, KNOWLEDGE, CUSTOMERS, METHODS
9.30 h Innovation management in production operations at AUDI: methods for implementing ideas in the practical world of an automobile manufacturing plantAlois Brandt, AUDI AG, DE
10.00 h Start-to-fi nish innovation management in the steel indus-try – incentives for surface technology in the car industryProf. Dr. Hans Ferkel, ThyssenKrupp Steel Europe AG, DE
10.30 h Coffee & Contacts
11.00 h Green Carbody Technologies: Starting point – Results – Future Bernhard Woll, AUDI AG, DE
11.30 h Innovation system for production engineeringDr. Gerd Eßer, Innovationsgesellschaft für fortgeschrittene Produktionssysteme in der Fahrzeugindustrie mbH inpro, DE
Regular updates, detailed programme and online registration at:
www.automotive-circle.com
Conference Programme www.automotive-circle.com www.automotive-circle.com Conference Programme
CAR BODY PRESENTATION
PLUS
CAR BODY PRESENTATION
Subject to change (status as of 6 September 2013)
Session II CURRENT TRENDS: PRODUCT
12.00 h Vehicle individualisation with foils – strategy and future perspectiveHans-Jürgen Michel, Opel Special Vehicles GmbH, DE; Ulrich Platthaus, 3M Deutschland GmbH, DE
12.45 h Lunch break
14.00 h The new Range Rover 2013: lightweight aluminium construction and customised paintworkChris Globe, Jaguar Land Rover, GB
14.30 h Demands on car painting today and tomorrow from a coating manufacturer’s perspectiveRalf Dunkel; Dr. Wolfgang Zitz, Magna Steyr AG & Co KG, AT
15.00 h Opportunities for electric mobility, and its infl uence on the “painted body” process chain based on the example of the BMW i3Christian Lang, BMW Group, DE
15.45 h Coffee & Contacts
16.15 h Sandouville, métamorphosis of a paint shop for Light Commer-cial VehiclesEmilie Agnolini, Renault S.A.S., FR
16.45 h Surface technology at AUDI – the example of the Q5Dr. Rüdiger Recknagel, AUDI AG, DE
Multiple colours from transfer paintingGido Hoppe, AUDI AG, DE
19.00 h Networking Night– Join the celebration of 30 Years of Automotive Circle International –
TUESDAY, 5 NOVEMBER 2013
Session III CURRENT TRENDS: PLANT ENGINEERING
8.00 h 30 years of car body painting – a look back and forward from the perspective of a plant manufacturerDr. Hans Schumacher, Dürr Systems GmbH, DE
8.30 h Strategy for effi cient production today and in the future: the demands on plant engineering in car body paintingDr. Michael Schlipf, Eisenmann Anlagenbau GmbH & Co. KG, DE
9.00 h Solutions for surface technology in the car industry – innova-tions and strategies from medium-sized businessesFredy Doll, IPR – Intelligente Peripherien für Roboter GmbH, DE
9.30 h Interior application with direct chargeEric Prus, Sames Technologies, FR
10.00 h Coffee & Contacts
10.30 h 30% energy and CO2 savings in hardness driers thanks to load-dependent matching of fl ow rateTobias Albrecht, Crone Wärmetechnik GmbH, DE
Session IV CURRENT TRENDS: PROCESS MATERIALS
11.00 h New substrates and their infl uence on the pre-treatment: OEM strategies in international comparisonDr. Peter Kuhm, Henkel AG & Co. KGaA, DE
11.30 h Move OEM coatings to the next levelDr. Audrée Andersen, BASF Coatings GmbH, DE
12.00 h Resources – challenge and opportunity of global innovation in the coating process Jean-Marie Greindl, PPG Industries Europe Sàrl, CH
12.30 h Lunch break
13.45 h The future needs a heritage: perspectives for car paintingDr. Bettina Vogt, Axalta Coating Systems Germany GmbH, DE
14.15 h The route to painting technology in 2018 – VW looks to the futureReinhard Alberts, Volkswagen AG, DE
Session V OEM PROJECT EXPERIENCE
14.45 h Volvo Car new paint shop in Chengdu, China – challenges and opportunitiesPhilip Hoebeke, Volvo Cars NV, BE
15.15 h The new Fiat Maserati paint shop in the Giovanni Agnelli plant: experience gained from the Maserati Quattroporte and the GhibliRoberto Selvestrel, Fiat Group Automobiles S.p.A., IT; Mauro Antico, Centro Ricerche Fiat S.C.p.A., IT
15.45 h Farewell address and end of the conference
CAR BODY PRESENTATION
Automotive CircleInternational
Connecting outstanding experts on car body manufacturing,
painting and assembly
\\ REGISTRATION PROCEDURESVincentz Network GmbH & Co. KGAutomotive Circle InternationalPlathnerstr. 4cDE-30175 HannoverT +49 511 99 10-378F +49 511 99 [email protected]
\\ YOU CAN ALSO REGISTER ONLINE ATwww.automotive-circle.com
\\ DATE AND VENUEConference: 4 – 5 November 2013
Hotel Dolce Bad NauheimElvis-Presley-Platz 1DE-61231 Bad NauheimT +49 6032 303-0F +49 6032 303-529www.dolce-bad-nauheim-hotel.com
We kindly ask you to make your own hotel res-ervation at the conference hotel, please refer to “Automotive Circle”. The hotel offers special room rates from 130,– € to 150,– € depending on different cancellation conditions. The men-tioned room rates include 5,– € breakfast per person and per day.
\\ CONFERENCE FEESConference (Standard): 1.675,– €*Conference (Early-bird): 1.475,– €*Early-bird price available until 6 October 2013.Students will get 50 % discount on standard prices on presentation of a valid student ID.* All prices plus 19 % German VAT. All confer-ences in Europe are subject to VAT. To reclaim, please contact your local tax offi ce.
\\ CONFERENCE FEES INCLUDEFees including full conference participation, incl. conference materials and list of del-egates, the authority for downloading the presentations on the Internet, luncheons, catering and the participation in the evening networking event.
\\ CONFERENCE LANGUAGEThe conference will be translated simultane-ously into English and German. Please note that the contents of lectures and presenta-tions at simultaneously interpreted confer-ences are predominately composed in the English language.
\\ CANCELLATIONSFees will be refunded in full if notice of cancel-lation is received by 6 October 2013. 50 % of the conference fees will be refunded in case notifi cation of cancellation is received later, but not later than 20 October 2013. Delegates who fail to attend without notifying the organ-iser will be liable for the whole conference fees. Substitutions of delegates may be made
at any time. Cancellations and changes should be notifi ed in writing. In all cases date of post-mark shall apply. Any fees to be refunded will be paid after the end of the conference. The organiser reserves the right to change the pro-gramme content or to cancel the event due to important reasons. Cancellation fees of third parties that may appear in this context will not be reimbursed.
\\ DATA PROTECTIONVincentz Network produces a list of delegates for each event which may include the follow-ing information: company name, address (zip code, city, country), name and job function of delegate. This list of delegates will be made available for all conference delegates, speak-ers, exhibitors and sponsors of the event, who may use the data for promotional purposes. Objection against publication and circula-tion of this data may be made at any time until 3 weeks prior to the event and has to be made in writing to the organiser. Company’s name, city and country might be published on the Internet as reference for upcoming Automotive Circle International-conferences.
\\ PLEASE NOTEBy registering you understand that your parti-cipation and attendance at the conference may be videotaped, fi lmed and/or audio recorded. You agree that the recording may be used for any lawful purposes that Vincentz Network, or its designees, in their sole discretion, may determine. The address data are processed for customer service and information purposes in compliance with the German Federal Data Protection Law. Company’s name, city and country might be published on the Internet as reference for the upcoming conferences of Automotive Circle International.
\\ PICTURESEisenmann, Vincentz Network
Terms & Conditions
First Name
Registration
Car Body Painting 20131st German Automotive Circle \\ 30th Workshop4 – 5 November \\ Bad Nauheim \\ Germany
I hereby register for:
ò Conference: 4 – 5 November 2013(For prices see Terms & Conditions.)
Method of payment:
ò Please charge my credit card:
ò American Express ò Eurocard/Mastercard ò Visa
For further information about paying by bank transfer, please contact: T +49 511 9910-378, [email protected]
ò Yes, I want to be informed about future Vincentz Network events and products via e-mail.
Expiry Date
Verifi cation Code (if necessary)
Date, Signature
Company
Name
E-mail (Please note that the invoice and further information will be sent to you via e-mail.)
Department
Function
Street
Zip Code/City
Country
Fax
Our Order No.
Title
Phone
Our Vat No.
Cardholder
Card Number
Your Contact:Kirsten Schmeing \\ Project Manager EventsT +49 511 9910-378 \\ F +49 511 9910-379 [email protected]