Capacitance Level sensor

5
welcome to Wema USA, Inc. Wema is the leading global manufacturer and provider of liquid level sensor and level sensing solutions for fuel tanks, water tanks, and black and grey water holding

Transcript of Capacitance Level sensor

Page 1: Capacitance Level sensor

welcome to

Wema USA, Inc.

Wema is the leading global manufacturer and provider of liquid level sensor and level sensing solutions for fuel tanks, water tanks, and black and grey water holding tanks.

Page 2: Capacitance Level sensor

Wema USA, Inc.

• The Capacitance Level Sensor (CLS) is used to continuously detect fuel level by measuring the capacitance variation as the level changes. It is ideally suited for anti-siphon, fuel-theft detection, and fleet management applications. The CLS should NOT be used for measuring water level, or levels of other conductive solutions.

Capacitance Level Sensor (CLS)

Page 3: Capacitance Level sensor

Wema USA, Inc.

Capacitance Level Sensor (CLS)

Material:Polyamide reinforced with glass fiber (PA66+GF30)

Length:

8” (200mm), 12” (300mm), 20” (500mm), 40” (1000mm), 60”(1500mm)Length can be easily shortened to fit different tank depths in the field, and parameters can be conveniently calibrated with an external calibrator.

Page 4: Capacitance Level sensor

Wema USA, Inc.

Capacitance Level Sensor (CLS)

Mounting Methods:SAE 5 hole, other assembly methods are available

Protection Rank: IP65

Output Signal:0~5V, or 0.5~4.5V, other options available upon request

Resolution Range: ≤1mm

Operational Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

Page 5: Capacitance Level sensor

Wema USA, Inc.

Contact Us

15 NE 3rd StreetFort Lauderdale, FL 33301

Local:  954-463-1075

Fax:    954-463-1270

Office Hours:Monday - Friday:8:30am - 5:00 pm EST

http://www.wemausa.com/