Candor product line 2013
-
Upload
candor-aps -
Category
Documents
-
view
226 -
download
2
description
Transcript of Candor product line 2013
CANDOR PRODUCT LINE 2013
1
Products:
Product name
Description Image/ Product no.
Treatment table top
Contesse
The Contesse is a carbon fibre tabletop designed for IGRT/IMAT/IMRT treatments. The Contesse can be installed on all kind of treatment tables. It provides a significant low absorption and a very high transmission. Installing the Contesse, any department optimizes all workloads, both regarding the actual treatment, but certainly also the speed and quality assurance in your set-up and immobilization of your patients. With the Contesse you find integrated immobilization for: Brain, Head&Neck, Breast and Lung. The Contesse consists of:
The tilting Combi Board
Angle carbon fibre devices – 3 different angle 4,7 and10 degrees
Complete “Easy Frame” Head/Neck/Shoulder immobilization
No.1000
CANDOR PRODUCT LINE 2013
2
Product name
Description Image/ Product no.
1 set of three handgrips 100 mm, 150 mm and 200 mm
1 pair of padded arm rests for the upper arm
1 piece 160 degrees padded rest for the forearms
1 butt stop with 8 positions to prevent the patient to slide
Head extension hinged to the tabletop itself
Side rails on both sides of the tabletop
Rotation lock with an acoustic alarm system securing that the Contesse is locked when intended for use
Base plate for Contesse
CANDOR PRODUCT LINE 2013
3
Product name
Description Image/ Product no.
ConCorde
A “simple” flat tabletop Same design as Contesse without integrated immobilization Ideal for IGRT,IMAT and IMRT Same low absorption and high transmission as Contesse The ConCorde can be installed on all kind of treatment tables. The Concorde is deal for all kind of “add-on” immobilization devices
No.IV1000
Mould Room Table
Candor Mould Room Table including a carbon fibre tabletop as shown in our brochure (incl. lifting device) Hand operated electrical up/down lifting device.
No. 3000
With Linear Longitudinal and Lateral Movement: Longitudinal movement 200mm.
CANDOR PRODUCT LINE 2013
4
Product name
Description Image/ Product no.
Lateral movement 100mm
Stand alone boards
ConBine Light Weight
Carbon fibre Combi Board with immobilization of Brain Head, Neck,Shoulder , Lung and Breast. The board is constructed as a “stand-alone” version and can be indexed to all known commercially sold patient tabletops. Installation to any CT scanner is an option on specific request. The Head/Neck immobilization is equipped with Candors own system named “Easy Frame” – thermoplastic mask system. Gross weight of the device only 4 kg. The ConBine consists of:
No. 1500LW
CANDOR PRODUCT LINE 2013
5
Product name
Description Image/ Product no.
The tilting Combi Board
1 butt stop with 7 positions to prevent the patient to slide
The ConBine LW is a “stand-alone” device
ConBine
Carbon fibre Combi Board with immobilization of Brain Head&Neck, Lung and Breast. Immobilization of the shoulders is an available option. The board is constructed as a “stand-alone” version and can be indexed to all known commercially sold patient tabletops. Installation to any CT scanner is an option on specific request. The Head/Neck immobilization is equipped with Candors own system named “Easy Frame” – thermoplastic mask system. The Combi Board can be tilted in 3 different angles 4-7-10 degrees. The unique design makes it
No.1500
CANDOR PRODUCT LINE 2013
6
Product name
Description Image/ Product no.
possible for the Head and Neck to be supported over the very end of the treatment table. This means of course you will gain a 360 degrees free access around your patient. Gross weight of the device only 5 kg. The ConBine consists of:
The tilting Combi Board
Angle carbon fibre devices – 3 different angle 4-7-10 degrees
Complete “Easy Frame” head/neck/shoulder immobilization
1 set of three handgrips 100 mm, 150 mm and 200 mm
1 pair of padded arm rests for the upper arm
1 piece 160 degrees padded rest for the forearms
1 butt stop with 8 positions to prevent the patient to slide
The ConBine is a “stand-alone” device
CANDOR PRODUCT LINE 2013
7
Product name
Description Image/ Product no.
ConBine CT
ConBine CT is a special option of Conbine design for CT and PET-CT.
The ConBine CT can with a very simple movement of a lock, be moved 50 mm to both sides – essential when you want to use the device in your PET/CT scanner and this way you get extra space for bigger patients.
No.CT1500
Accessories for ConBine
1307 1220 1141 1142 1143 1221 1225 1843 1842 1815
Buttstop Armsupport 1 pcs. Anglesupport Level 1 Anglesupport Level 2 Anglesupport Level 3 Handsupport 1 set of 3 different lengths Armbrigde Indexbar Varian not adjustable Indexbar Varian with Clamping Indexbar Universal with Clamping
ConChest Light Weight Basic
The board is a carbon Fibre breast board. The board is a “stand alone” device and can easily be indexed to all commercially sold tabletops. Gross weight of the device only 3 kg The ConChest LW Basic consists
No. 1800LW
CANDOR PRODUCT LINE 2013
8
Product name
Description Image/ Product no.
of:
1 butt stop with 7 positions
ConChest Light Weight
The board is a carbon Fibre breast board. The board is a “stand alone” device and can easily be indexed to all commercially sold tabletops. Gross weight of the device only 3.8 kg The ConChest LW consists of:
Angle carbon fibre devices 4-7-10 degrees
1 set of three pairs of handgrips, either 100 mm, 150 mm or 200 mm
1 pair of padded arm rests for the upper arm
1 piece 160 degrees padded rest for forearms
1 butt stop with 7 positions
No. 1800LW-LX
Accessories for ConChest
1854 1220 1870 1871 1872 1221 1225 1843 1842 1815
Buttstop Armsupport 1 pcs. Anglesupport Level 1 Anglesupport Level 2 Anglesupport Level 3 Handsupport 1 set of 3 different lengths Armbrigde Indexbar Varian not adjustable Indexbar Varian with Clamping Indexbar Universal with Clamping
CANDOR PRODUCT LINE 2013
9
Product name
Description Image/ Product no.
ConNeck Type 1
Head holder for immobilization of Head. The device is a “stand-alone” device and can easily be indexed to all commercially sold patient tabletops. The holder is equipped with Candors own system, named “Easy-Frame” the thermoplastic mask system. It accommodates Easy-Frame 1 & 2 Gross weight of the device only 1 kg
Can be delivered in either Carbon Fibre or Acrylic
No.1900/1900-A
ConNeck Type 2
Carbon fibre head holder for immobilization of Head/Neck and Shoulder. The device is a “stand-alone” device and can easily be indexed to all commercially sold patient tabletops. The holder is equipped with Candors own system, named “Easy-Frame” the thermoplastic mask system. It accommodates Easy-Frame 1, 2 & 3 Gross weight of the device only 1.5 kg
No.1900-2
CANDOR PRODUCT LINE 2013
10
Product name
Description Image/ Product no.
The ConNeck consists of
Equipped with Easy Frame for the mask system
Anglesupport Level for ConNeck Type 1
Set of 6 pcs. In solid POM L1 = 4 degrees L2 = 7 degrees L3 = 10 degrees L4 = 13 degrees L5 = 16 degrees L6 = 13 degrees
No. 19030
Anglesupport Level for ConNeck Type 2
Set of 3 pcs. In Carbon Fibre L1 = 4 degrees L2 = 7 degrees L3 = 10 degrees
No. 1903
CANDOR PRODUCT LINE 2013
11
Product name
Description Image/ Product no.
ConNeck IMRT/IGRT
Carbon fibre head holder for immobilization of Head/Neck and Shoulder. The device is a “stand-alone” device and can easily be indexed to all commercially sold patient tabletops. The holder is equipped with Candors own system, named “Easy-Frame” the thermoplastic mask system. It accommodates Easy-Frame 1, 2 & 3 Gross weight of the device only 2.9 kg
No. 5000
Anglesupport Level 1 for ConNeck IMRT/IGRT
Carbon fibre anglesupport 4 degrees
CANDOR PRODUCT LINE 2013
12
Product name
Description Image/ Product no.
ConNeck Extended
The extended model 6000 Con Neck. The Con Neck is a dedicated head/neck/shoulder immobilization device. You obtain the molded mask by the use of low temperature thermoplastic material. The device is constructed in high quality carbon fiber ensuring you a high transmission and excellent absorption values. The plate allows you to produce a cross section of the patients spine area due to the fact that we obtain a significant low absorption vale. Constructing the Con Neck, we use no metal in a line from the brain area until far under the pelvic area. The holding device is used with Candors Easy Frame 3 and 5 - both extreme easy working thermoplastic masks. The 6000 plate can easily be combined with, and mounted with the 7000 exact plate.
No. 6000
CANDOR PRODUCT LINE 2013
13
Product name
Description Image/ Product no.
Exact plate A add on product to ConNeck models This device is constructed to be easily used in the brain area in combination with BrainLABs especially designed standard balls.
No. 7000
CANDOR PRODUCT LINE 2013
14
Product name
Description Image/ Product no.
Prone Board A complete new design meant for "Add-on" devices for both CT and Linac patient tabletops. Our long constructed carbon fiber board allows you to treat a mammae over the end of the treatment table top. The carbon fiber top is confirmed up to a patient’s weight of 250 kgs The plate is very easy to mount and index on any patient tabletop. The CT version is supported/indexed by blocks and also very easy and simple to work with.
Prone Board With accessories
Foam Madras Foam Pillow Healthy Shell Basket
Prone Board With accessories and Index CT.
Foam Madras Foam Pillow Healthy Shell Basket Foam Block Base 100 mm. Foam Block Extend 100 mm. Index bars
CANDOR PRODUCT LINE 2013
15
Product name
Description Image/ Product no.
ConFeet for Contesse
A unique PELVIC immobilization device. Can be adjusted for the individual patient in order to optimize each immobilization. An alarm sounds if the patient moves out of the desired immobilization position
No. P2000-2009
Torax Bow Torax pressure bow for precise fixation of inside organs. The unit consists of
One Bow
One set of pressure plates
One set of pressure screws with rulers
One set of rulers for board. The Torax Bow can be delivered in two different nights. 300 mm. And 350 mm.
No. 2100 350 mm. No. 2101 300 mm.
CANDOR PRODUCT LINE 2013
16
Product name
Description Image/ Product no.
Torax Bow Torax pressure bow for precise fixation of inside organs. The unit consists of
Two Bow
Two set of pressure plates
Two set of pressure screws with rulers
One set of rulers for board. The Torax Bow can be delivered in two different heights. 300 mm. And 350 mm.
No. 2100-2 350 mm. No. 2101-2 300 mm.
Torax Full Body Fixation
Torax Full Body Fixation for precise fixation of inside organs. The unit consists of
One ConChest Board with Buttstop
One ConFeet Pelvic fixation
Two Bow
Two set of pressure plates
Two set of pressure screws with rulers
The Torax Bow can be delivered in
CANDOR PRODUCT LINE 2013
17
Product name
Description Image/ Product no.
two different heights. 300 mm. And 350 mm.
No.
Belly Board
In an attempt to reduce the volume of small intestine in the radiation fields, this belly board has been developed. The volume of small intestine irradiated during treatment of pelvic malignancies is one of the major factors responsible for both early effects, such as diarrhoea and weight loss, and late effects such as chronic diarrhoea, increased resumption of nutrients and stenosis / fibrosis To reposition the belly board during treatment, rulers have been placed on both sides of the board next to the hole. Because of it’s completely closed and flat surface the belly board is easy to clean, ensuring
No. B9000
CANDOR PRODUCT LINE 2013
18
Product name
Description Image/ Product no.
hygienic use. Soft polyethylene padding on the cranial sides ensures a comfortable position for the head.
ACCESSORIES
Easy Frame 1; 2.4 mm
Disposable Frame for Cranial/head&neck immobilisation 2.4 mm material/perforated.
No.EAF-EXT1-2,4
Easy Frame 2; 2.4 mm
Disposable Frame for Cranial/head&neck immobilisation 2.4 mm material/perforated.
No.EAF-EXT2-2,4
CANDOR PRODUCT LINE 2013
19
Product name
Description Image/ Product no.
Easy Frame 3; 2.4 mm
Disposable Frame for Cranial/head/neck & shoulder immobilisation.2.4 mm material/perforated.
No.EAF-EXT3-2,4
Easy Frame 1; 3.2 mm
Disposable Frame for Cranial/head&neck immobilisation 3.2 mm material/perforated.
No.EAF-EXT1-3,2
Easy Frame 2; 3.2 mm
Disposable Frame for Cranial/head&neck immobilisation 3.2 mm material/perforated.
No.EAF-EXT2-3,2
CANDOR PRODUCT LINE 2013
20
Product name
Description Image/ Product no.
Easy Frame 3; 3.2 mm
Disposable Frame for Cranial/head/neck & shoulder immobilisation.3.2 mm material/perforated.
No.EAF-EXT3-3,2
Stainless Steel Waterbath
DIGIBATH 2 Waterbath for thermoplastic masks. Produced in stainless steel. Equipped with a lid. Measurements: 600x480x80 mm
No.DIGI2000
Carbon Fibre Headrests
Carbon fibre headrests – 6 different angles pr pcs. Your choice between A,B,C,D,E, or F Material thickness only 0.4 mm
No. C2008-(A-F)
CANDOR PRODUCT LINE 2013
21
Product name
Description Image/ Product no.
Carbon Fibre Headrests; Set of 3
Carbon fibre headrests. 3 pcs. Your choice between A,B,C,D,E, or F Material thickness only 0,4 mm.
No. C2008-(A-F)
Carbon Fibre Headrests; Set of 6
Full set A,B,C,D,E,F Material thickness only 0.4 mm
No. C2008-A+B+C+D+E+F
Foam headrest
A comfortable but also solid cushion. Very suitable. Very suitable for both Brain, Head/Neck Lung and Breast treatments.
No. F2008
CANDOR PRODUCT LINE 2013
22
Product name
Description Image/ Product no.
Foam headrest A comfortable but also solid cushion. In 3 different angles. Very suitable for both Brain, Head/Neck Lung and Breast treatments.
Carbon Fibre Knee Rest
A very light – but strong knee rest. Easy to clean. The product has a very long lifetime compared to a conventional foam material. Gross weight 1.5 kg
No.P1100-2008
Foam Knee Rest
A very light knee rest with an exellent rest and support of the patients legs.
No. P1100-2012
CANDOR PRODUCT LINE 2013
23
Product name
Description Image/ Product no.
Tabletop Cover
Candor Tabletop Cover Disposable rubber-backed tissue cover Measurements 700x2100 mm – 100 pcs per carton
No.C70-210
Candor Transport System
Collimator Transport System System for safe transport/installation of the electron applicators
No.1700