�

�

�

�

Observe all local plumbing and building codes.Prior to installation, unpack the new lavatory and inspect itfor damage. Return the lavatory to its protective cartonuntil you are ready to install it.All information in these instructions are based the latestproduct information available at the time of publication.Kohler China reserves the right to make changes inproduct characteristics, packaging, or availability at anytime without notice.

Make sure that the wall and floor are squareand plumb to ensure proper installation.

Kohler lavatory is made according to American NationalStandard that it can match the American lavatory fittings.Any other lavatory fittings may not fit for Kohler lavatory.

IMPORTANT:

�

�

�

�

REQUIRED MATERIALS/

(NOT SUPPLIED)

TOOLS

�

�

�

�

�

�

LevelDrill with bit6mm14mm wrenchFraming squareChannel lock pliersTape measure

�

�

�

�

�

�

6mm14mm

-1-

CANDIDEPANACHE

INSTALLATION INSTRUCTIONS

VITREOUS CHINA SEMI-PEDESTAL LAVATORYK-17652T/K-17653T/K-17656T/K-17657T

1061417-T01-B, 2014

Copyright Kohler China Ltd., 2014

ORDERING INFORMATION

CANDIDE Semi-Ped Lavatory .................................K-17652TIncludes Basin .....................................................K-17151T

Semi-Pedestal.................................................K-17154TCANDIDE Semi-Ped Lavatory .................................K-17653T

Includes Basin .....................................................K-17150TSemi-Pedestal.................................................K-17154T

PANACHE Semi-Ped Lavatory ................................K-17656TIncludes Basin .....................................................K-17156T

Semi-Pedestal.................................................K-17154TPANACHE Semi-Ped Lavatory ................................K-17657T

Includes Basin .....................................................K-17155TSemi-Pedestal.................................................K-17154T

.................................................K-17652T...............................................................K-17151T

.................................................................K-17154T.................................................K-17653T

...............................................................K-17150T.................................................................K-17154T

..............................................K-17656T...............................................................K-17156T

.................................................................K-17154T..............................................K-17657T

...............................................................K-17155T.................................................................K-17154T

1061417-T01-A

Fig.#11

-2-Kohler reserves the right to change marked dimensions without prior notice.

Reference Value UNIT: mm

K-17652T(17154T+17151T)

K-17653T(17154T+17150T)

K-17656T(17154T+17156T)

K-17657T(17154T+17155T)

*Suggested installation dimensions only for K-9071T & K-7119T. Please adjust if necessary.* K-9071T K-7119T

Finished Wall

Finished Wall

Finished Wall

Finished Wall

Finished Wall

Finished Wall

Finished Wall

Finished Wall

35

35

35

35

45

45

45

45

Floor

Floor

Floor

Floor

600

560

600

565

7065

68

68

225

225

210

205

485

470

480

465

32

32

32

32

10

10

10

10

Hot

Hot

Hot

Hot

10

10

10

10

Cold

Cold

Cold

Cold

150

150

162

162

280

280

280

280

171

177

190

190

784

182

182

200

200

254

254

254

254

*Max

313

313

*

* *Max

313

313

* *Max

330

330

* *Max

330

330

102

102

102

102

230

230

230

230

115

115

115

115

734

740

737

737

787

785

1.

2.

3.

1. Make sure the basin is installed by a competent installer.

2. Install the services.

3. Make sure that the hot and cold water supply pipes andthe waste are installed correctly.

4. Hold the semi-pedestal in positionand mark the position of fixing holes.

5. Drill the holes and secure the semi-pedestal in position with wall plugsand screws. Place cover caps overthe heads of the screws.

6. Fit the tap and waste to the basin inaccordance with the manufacturer sinstructions.

'

Fig.#22

ScrewCover Cap

Wall Plug

4.

5.

6.

-3-1061417-T01-A

Fig.#44

8. Fit the basin in position over thesemi-pedestal.

9. Adjust the offset nut until the basinis level.

10. When the basin is level, fit thewashers and the nuts and securein place.

11. Remove any excess siliconesealant.

12. Place the overflow cover over theoverflow hole in the basin (ifsupplied).

WasherNut

Offset Nut

8.

9.

10.

11.

12. ()

Apply SiliconeSealant (Optional)

( )

7. Apply silicone sealant to the back ofbasin (optional).

7. ( )

Fig.#33

IMPORTANT CONSUMER INFORMATIONIMPORTANT CONSUMER INFORMATION

CARE AND CLEANING

To keep your lavatory looking new, make sure you rinse it outthoroughly after each use. on thisproduct, as they will scratch and ruin the surface. Stubbornstains, paint, or tar can be removed with turpentine or paintthinner.

Please do not use hard materials (likescouring pad) to clean product surface, especially theproduct logo.

DO NOT USE ABRASIVES

CAUTION:

Caution! Risk of product damage.

Many cleaners contain abrasive and chemical substances,and should not be used for cleaning stainless steel, enamel,plated or plastic fittings.

These finishes should be cleaned using a mild washing updetergent or soap solution, rinsed and then wiped dry with asoft clean cloth.

Do not use the product in the water below 0 C.o0 Co

-4-1061417-T01-A