Roku Troubleshooting Process

• Roku help brings easy-to-follow and guaranteed troubleshooting steps for Roku remote and How to Setup Roku With the increase in the number of issues related to the malfunctioning of the Roku remote Roku is the primary source of entertainment for many people, so when they see their Roku Remote not working, then they have no other option, but to seek the help of the professionals. Therefore, it is important to choose the genuine tech support.

Troubleshooting steps for Roku wireless remote.

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

Troubleshooting steps for Roku wireless remote

Press the pairing button and see if it works. In order to do so, you need to

• 1. If your Roku Remote Not Working, Remove the battery cover and open the compartment where batteries are inserted.

• 2. After that, press the pairing button and immediately release it.

• 3. If you see the pairing light turning on, then that’s good, but if not, then there is an issue with the batteries, so change them.

• 4. Finally, you need to test the remote.www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

• 1. Take out the power adapter of the Roku player for 20 seconds and then, plug it in.

• 2. After starting the device, take the batteries out of the remote.• 3. Now, reinsert the batteries and see if it works.

Step 3: Pair the remote with the Roku player again• 1. Go the battery compartment by taking-off the battery cover.• 2. Press the pairing button for three seconds or until you see the LED glow.• 3. You will see the remote pairing related info on your TV screen.

Step 2: Power-cycle both, the Roku player and the remote

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

• 1. Take off the battery cover and open the battery area.• 2. Shut down the power supply of Roku player.• 3. On the Roku remote, press and hold A & B button, also known as,

Home and Down buttons. • 4. Release the buttons after you see the flash. You will see three more

flashes after that, which means clearing of the remote.• 5. Attach the power plug back into the Roku player.• 6. Put the remote into pairing mode. You will have to press and hold the

pairing button until the pairing LED flashes.• 7. Now, you see a message on the screen after a couple of minutes, and

then, the Roku player will pair with the remote.

Step 4: Now, clear the remote and try to re-pair it

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

• 1. There is a factory reset button at the bottom or on the back side of the Roku. For streaming sticks, it is at the top, so hold it for 20 seconds.

How to use and maintain the remote control?• 1. Keep the remote clean and dry. This is the most common

reason behind Roku not working issue.• 2. The line-of-sight must be clear between the remote and

the Roku player.• 3. Replace the old batteries with the new ones without

shifting the brand.

Step 5: Still Roku remote not working? Reset your Roku

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

3. Try to pair the remote with the Roku player again. For this you will

have to

• 1. Now, remove the battery cover of the remote and open the battery compartment.

• 2. Find the pairing button and press & hold it until you see the LED light flashing.

• 3. Finally, you will see a notification on the TV screen about successful pairing.

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

Besides Roku remote troubleshooting, we are also expert in providing troubleshooting steps for other issues as well. These

are:

• HDCP unauthorized Roku.• Roku error code 011.• Roku HDCP unauthorized content

disabled.• Roku HDCP unauthorized.• Roku error code 003.• Roku update.• Roku error code 001.• Roku not connecting to the TV.• HDCP unauthorized content disable

Roku.

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

To resolve the HDCP Unauthorized Content issue, try these steps: • On both your Roku player and your TV or receiver, unplug each end of

the HDMI connectors.• Unplug power from the TV and the Roku player for 30 seconds.• Reconnect both ends of the HDMI cord, pushing them firmly, all the

way in.• Plug in the TV and Roku player. • Try viewing the video again. 

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

For More Information About Troubleshooting visit:

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

For all the issues related to Roku, there are many tech support providers available. They can even fix Roku error code 01, 03,011, 014 which is extremely hard to fix on your own.

http://goo.gl/pSvttS

www.rokucomsupport.comCall US Toll Free :+1-855-293-0942

For More Information:

www.rokucomsupport.com