CAL-ROYAL - Zipf Lockstore.zipflock.com/zipflockco.com/HDCAT/Cal-Royal.pdf · CAL-ROYAL 116 (PL-4)...

CAL-ROYAL

115(PL-4)

®ZIPF LOCK COMPANY

GENESYS SERIES GRADE 1

Extra Heavy Duty Cylindrical LeversetANSI A156.2 Series 4000, Grade 1.U.L. Listed for 3 Hours.Clutch-Patented Free Turning Handle in Locked Position.Non-Handed. Levers BOTH Sides.Lifetime Warranty. BHMA Certified.Solid Brass 6-pin Cylinder. "C" Keyway.

10 locks per case

Function No. OperationEntrance/ GE-CGN-00- Turn/Push button locking. Pushing and turning button locks outside lever requiring useOffice of key until button is manually unlocked. Push-button lockIng. Pushing button in inside

lever locks outside lever. Turning inside lever or operating key in outside lever releasesbutton automatically.

Entrance w/ GE-CGN-01- Pushing button in inside lever locks outside lever. Turning inside lever or operating keyPush Button in outside lever releases button automatically. Closing door does not release button.

Button cannot be fixed in lock position. Inside lever always free

Store Lock GE-CGN-02- Deadlocking latchbolt operated by lever from either side, except when both levers are(non clutch) locked key in either lever from either side (non clutch).

Classroom GE-CGN-03- Deadlocking latch bolt operated by lever from either side except when outside lever islocked from outside by key. When outside lever is locked, latch bolt is operated byturning inside lever.

Commun- GE-CGN-04- Deadlocking latch bolt operated by lever from either side. Turning key in either levericating locks or unlocks its own lever independently.

Storeroom GE-CGN-05- Outside lever fixed. Entrance by key only. Inside lever always unlocked.

Classroom GE-CGN-07- Deadlocking latch bolt operated by rotating the inside lever, or rotating the outsideIntruder lever only when not locked from the inside or outside key. Outside lever is locked or

unlocked by turning the key in the inside or outside lever. Inside lever cannot be locked.

Institution GE-CGN-09- Deadlocking latch bolt operated by key in either lever. Both levers always fixed.

Privacy GE-CGN-20- Latch bolt operated by lever from either side. Outside lever is locked by push buttoninside and unlocked by emergency release outside.Turning inside lever or closing doorreleases push button.

Passage GE-GN-30- Latch bolt operated by lever from either side at all times.

Dummy GE-GN-40- Single dummy trim for one side of door. Pull only.

Meets ADA requirements. Speciallydesigned for Barrier Free Applica-tions. Meets A117.1 AccessibilityCode.

To Order, Specify:

Function: GE-CGN-00- EntranceFinish: 26D Satin ChromeLatch: 234 2-3/4" Backset

Meets theBuy American

Act

v1

SPECIFICATIONSDOOR THICK.: 1-3/8" to 1-3/4"BACKSET: 2-3/4" square face-UL Listed, 1-1/8" wide faceSTRIKE: ASA, 1-1/4" x 4-7/8"BORE: 2-1/8" x 1"THRU-BOLTS: 5/16" Diam. 2-3/4" center to centerROSE: 3-1/2"KEYWAY: 6 pin solid brass "C" keyway, furnished keyed

different. For other keyways use Ilco cylinder15995 on page 146.

FINISHES: US3(605) Polished Brass10B(613) Oil Rubbed Bronze26D (626) Satin Chrome

See next page for Grade 1 Interchangeable Core Locks

CAL-ROYAL

116(PL-4)

®ZIPF LOCK COMPANY

GENESYS SERIES GRADE 1Interchangeable Core Locks

Extra Heavy Duty Cylindrical LeversetANSI A156.2 Series 4000, Grade 1.U.L. Listed for 3 Hours.Clutch-Patented Free Turning Handle in Locked Position.Non-Handed. Levers BOTH Sides.Lifetime Warranty. BHMA Certified.For Interchangeable Core Locks inthe 00, 03, 05 and 09 functions.

10 locks per case


v5


Act

SPECIFICATIONSDOOR THICK.: 1-3/8" to 1-3/4"BACKSET: 2-3/4" square face-UL Listed, 1-1/8" wide faceSTRIKE: ASA, 1-1/4" x 4-7/8"BORE: 2-1/8" x 1"THRU-BOLTS: 5/16" Diam. 2-3/4" center to centerROSE: 3-1/2"KEYWAY: I/C: Will accept 6 or 7 pin Best, Arrow or

Falcon cores & Schlage full size cores.FINISHES: US3(605) Polished Brass (limited availability)

26D (626) Satin Chrome

To Order, Specify:

Core Type: GE-ICCGN- Small Format*Function: 00- EntranceFinish: 26D Satin ChromeLatch: 234 2-3/4" Backset*See below for core type number.

Function No.** OperationEntrance/ GE-ICCGN-00- Turn/Push button locking. Pushing and turning button locks outside lever requiring useOffice of key until button is manually unlocked. Push-button lockIng. Pushing button in inside

lever locks outside lever. Turning inside lever or operating key in outside lever releasesbutton automatically.

Classroom GE-ICCGN-03- Deadlocking latch bolt operated by lever from either side except when outside lever islocked from outside by key. When outside lever is locked, latch bolt is operated byturning inside lever.

Storeroom GE-ICCGN-05- Outside lever fixed. Entrance by key only. Inside lever always unlocked.

Institution GE-ICCGN-09- Deadlocking latch bolt operated by key in either lever. Both levers always fixed.

**Number shown for small format interchangeable core locks. Sold less cores. Order seperately.

Core Type No. DescriptionGE-ICCGN- For small format coresGE-ICGYS- For Schlage full size coresGE-RUSICCGN- For Russwin cores - Special Order OnlyGE-SARICCGN- For Sargent cores - Special Order OnlyGE-YALICCGN- For Yale cores - Special Order Only

Locks are sold less cores. For small format andSchlage cores see below for stock numbers. Wedo not stock cores for Russwin, Sargent or Yale.

FULL SIZE CORES

INTERCHANGEABLE CORESStock No. Finish23-030-C 606, 62623-030-C123 606, 62623-030-C145 606, 62623-030-E 606, 626

FINISHES: 606 Satin Brass626 Satin Chrome

TO ORDER: Specify Stock No. and Finish.

Stock No. LengthAR-100CR-UC 6 pinAR-7100CR-UC 7 pinKeyways: 1D, AB, BB, DB, EB, FB, GB, HB, JB, KB, MB.Finishes: 4-Satin Brass, 26D-Satin Chrome

SMALL FORMAT CORES

To Order,Specify:Stock No. Keyway and Finish (AR-C6S-UC AB 26D)

CAL-ROYAL

117(PL-4)

®ZIPF LOCK COMPANY

OMEGA GRB SERIESGRADE 1

Extra Heavy Duty Cylindrical LocksetANSI A156.2 Series 4000, Grade 1.U.L. Listed For 3 Hour Doors.Lifetime Warranty. BHMA Certified.Solid Brass 6-pin Cylinder. "C" Keyway.

10 locks per case

GRBUS-32D

To Order, Specify:

Function: GRB-00- EntranceFinish: 32D Satin Stainless SteelLatch: 234 2-3/4" Backset

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 2"BACKSET: 2-3/4" square face-UL Listed

1-1/8" wide faceSTRIKE: ASA, 1-1/4" x 4-7/8"BORE: 2-1/8" x 1"ROSE: 3"KEYWAY: 6 pin solid brass "C" keyway, furnished keyed

different. For other keyways use Ilco cylinder15995 on page 146.

FINISHES: 32D (630) Satin Stainless Steel

Function No. Operation ANSIEntrance GRB-00- Push-turn locking. Pushing button in inside knob locks outside knob until unlocked F82

with key or turning inside knob. Closing door does not release button.

Classroom GRB-03- Deadlocking latchbolt operated by knob from either side except when outside knob F84is locked from outside by key. When outside knob is locked, latchbolt is operatedby key in outside knob or by rotating inside knob.

Storeroom GRB-05- Deadlocking latchbolt operated by key in outside knob or by rotating inside knob. F86Outside knob is always fixed.

Privacy GRB-20- Latchbolt operated by knob either side. Outside knob is locked by push button F76inside and unlocked by emergency release outside, rotating inside knob or closingdoor.

Passage GRB-30- Latchbolt operated by knob from either side at all times. F75

v4

EXPLORER SERIES GRADE 2

Heavy Duty Cylindrical LeversetANSI A156.2 Series 4000, Grade 2.U.L. Listed for 3 Hours.Thrubolts can be set to all major lockmanufacturers.Lifetime Warranty. BHMA Certified.Non-Handed.Solid Brass 6-pin Cylinder. "C" Keyway.

SPECIFICATIONSDOOR THICK.: 1-3/8" to 2"BACKSET: 2-3/8" 1" wide face or 2-3/4" 1" wide face

and has a 1-1/8" wide face adaptorSTRIKE: ASA, 1-1/4" x 4-7/8"BORE: 2-1/8" x 1"THRU-BOLTS: Adjustable for all major lock manufacturersROSE: 3-5/16"KEYWAY: 6 pin solid brass "C" keyway, furnished keyed different.

For other keyways use Ilco cylinder 15995 on page 146.FINISHES: US3 (605) Polished Brass


To Order, Specify:

Function: XP-00- EntranceFinish: 26D Satin ChromeLatch: 234 2-3/4" Backset

Thrubolts can be set for allmajor lock manufacturerslocations


Act


Act

CAL-ROYAL

118(PL-4)

®ZIPF LOCK COMPANY

SLUS-3, 5, 10, 10B, 15, 26D

10 locks per case

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" square face-UL Listed

1-1/8" wide faceSTRIKE: ASA, 1-1/4" x 4-7/8"BORE: 2-1/8" x 1"THRU-BOLTS: 5/16" Diam. 2-3/4" center to centerROSE: 3-5/16"KEYWAY: 6 pin solid brass "C" keyway, furnished keyed

different. For other keyways use Ilco cylinder15995 on page 146.I/C: Will accept 6 or 7 pin Best, Arrow or Falcon cores.

FINISHES: US-3 Polished Brass 5 Antique Brass10 Satin Bronze 10B Oil rubbed Bronze15 Satin Nickel 26D Satin Chrome

I/C stocked in 26D finish only.

AGUS-3, 5, 10, 10B, 15, 26D

With Convertible Thrubolt. RemovableThrubolts are provided and recommended foruse on high frequency doors.

*Abbreviation Definition (**Specify design: AG, RL or SL)PIO-** Standard lockPIO-C** Standard lock with clutch functionPIO-IC** Interchangeable core lock (small format)PIO-ICC** Interchangeable with clutch function

For FULL SIZE core with SL design see ICCOM page 119

Function: PIO-SL-00- EntranceFinish: 26D Satin ChromeLatch: 234 2-3/4" Backset•Limited finishes with Interchangeable Core.

To Order, Specify:

Meets ADA requirements. Speciallydesigned for Barrier Free Applications.

v5***There is no mechanical warranty if installed on educational facilities and/or extensive high traffic doors.

Cores not included with I/C locks -order separately. See page 120 for cores.

Function *No. *I/C No. OperationEntrance/ PIO-**-00- PIO-IC**-00- Turn/Push button locking. Pushing and turning button locks outsideOffice PIO-C**-00- PIO-ICC**-00- lever requiring use of key until button is manually unlocked. Pushing

button in inside lever locks outside lever. Turning inside lever oroperating key in outside lever releases button automatically.

Entrance PIO-SL-01- —— Pushing button in inside lever locks outside lever. Turning inside leveror operating key in outside lever releases button automatically. Closingdoor does not release button. Button cannot be fixed in locked position.Inside lever always free. Latch bolt automatically deadlocks when dooris closed.

Classroom PIO-**-03- PIO-IC**-03- Deadlocking latch bolt operated by lever from either side except whenPIO-C**-03- PIO-ICC**-03- outside lever is locked from outside by key. When outside lever is

locked, latch bolt is operated by turning inside lever.

Storeroom PIO-**-05- PIO-IC**-05- Outside lever fixed. Entrance by key only. Inside lever always unPIO-C**-05- PIO-ICC**-05- locked.

Privacy PIO-**-20- —— Latch bolt operated by lever from either side. Outside lever is lockedPIO-C**-20- by push button inside and unlocked by emergency release outside.

Turning inside lever or closing door releases push button.

Passage PIO-**-30- —— Latch bolt operated by lever from either side at all times.

Dummy PIO-**-40- —— Single dummy trim for one side of door. Pull only.

Exit PIO-**-50- —— Blank plate outside. Inside lever always unlocked.**Specify design: AG, RL or SL

PIONEER SERIES GRADE 2

Standard Duty Cylindrical LeversetANSI A156.2 Series 4000, Grade 2.U.L. Listed For 3 Hour Doors.Lifetime Warranty***. BHMA Certified.Non-Handed.Levers BOTH Sides.Individual Spring on Each Side To Prevent Leversag, Maintain Reliability, Reduce Maintenance.Coil Compression Springs Provide Great Strengthand Durability.Solid Brass 6-pin Cylinder. "C" Keyway.Also Available in Interchangeable Core.

RLUS-3, 5, 10, 10B, 15, 26D


Act

See comparisonchart page 117

CAL-ROYAL

119(PL-4)

®ZIPF LOCK COMPANY

10 locks per caseCOMMANDER SERIES

Heavy Duty Cylindrical LeversetANSI A156.2, Series 4000, Grade 2.U.L. Listed For 3 Hour Doors.Lifetime Warranty."Free Turning Handle in Locked Position.For SCHLAGE FULL SIZE format cores.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" standard.STRIKE: ASA. 1-1/4" x 4-7/8".BORE: 2-1/8" x 1"THRU-BOLTS: 5/16" Diam. 2-3/4" center to centerROSE: 3-5/16"KEYWAY: Uses Full Size Interchangeable

core - order seperately.FINISHES: 26D (626) Satin Chrome

To Order, Specify:

Design: ICCOM CommanderFunction: -00- EntranceFinish: 26D Satin ChromeLatch: 234 2-3/4" Backset• Order cores seperately, if needed.

Function No. OperationEntrance -00- Turn/Push button locking. Pushing and turning button locks outside lever requiring use of key

until button is manually unlocked. Pushing button locks outside lever until unlocked with keyor inside lever is turned.

Storeroom -05- Outside lever fixed. Entrance by by key only. Inside lever always unlocked.

Use Pioneer SL Serieslocksets for interiorfunctions-see page 118

With Convertible Thrubolt. RemovableThrubolts are provided and recom-mended for use on high frequency doors.

10 locks per caseCHALLENGER SERIES

Light/Medium Duty Cylindrical LeversetANSI A156.2, Grade 2.U.L. Listed.Lifetime Warranty. BHMA Certified.6-pin Cylinder. "C" keyway.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" standard on SG.

2-3/8" standard on AST.STRIKE: ASA. 1-1/4" x 4-7/8".BORE: 2-1/8" x 1"ROSE: 3"KEYWAY: 6-pin Cylinder. "C" keywayFINISHES: US3 (605) Bright Brass

10B (613) Oil Rubbed Bronze15 (619) Satin Nickel26D (626) Satin Chrome

Function No. OperationEntrance -00- Turn/Push button locking. Pushing and turning button locks outside lever requiring use of key until

button is manually unlocked. Pushing button locks outside lever until unlocked with key or insidelever is turned.

Storeroom -05- Outside lever fixed. Entrance by by key only. Inside lever always unlocked.

Privacy -20- Latch bolt operated by lever from either side. Outside lever is locked by push button inside andunlocked by emergency release outside. Turning inside lever or closing door releases push button.

Passage -30- Latch bolt operated by lever from either side at all times.

Dummy -40- Single dummy trim for one side of door. Pull only.

SG (SG)US-3, 10B, 15, 26D

Astor (AST)US-3, 15

Specify Hand

To Order, Specify:

Design: SG SGFunction: -00- EntranceFinish: 26D Satin ChromeLatch: 234 2-3/4" BacksetSpecify Hand when ordering AST lever

v3


Act


Act

Lifetime Warranty

CAL-ROYAL

120(PL-4)

®ZIPF LOCK COMPANY

BARRINGTON SERIES GRADE 2

Standard Duty Cylindrical KnobsetANSI A156.2 Series 4000, Grade 2U.L. Listed for 3 Hour Doors.Lifetime Warranty.Internal Mechanism Heavy Gauge Cold RolledSteel, All Parts Are Zinc Plated and Dichromated toAssure Protection From Rust Or Corrosion.Long Spindle Hub Eliminates Knob Wobble.Solid Brass 6-pin Cylinder. "C" Keyway.

20 locks per case

Quality Designed andEngineered For Residentialand Commercial Buildings.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" square face-UL Listed

1-1/8" wide faceSTRIKE: ASA, 1-1/4" x 4-7/8"BORE: 2-1/8" x 1"ROSE: 2-15/16"KEYWAY: 6 pin solid brass "C" keyway BA-00 furnished KA-4,

balance BA furnished keyed different.For other keyways use Ilco cylinder 15995 onpage 146.

FINISHES: US-3 (605) Bright Brass10B (613) Oil rubbed Bronze32D (630) Stainless Steel

Function No. Operation ANSIEntrance -00- Pushing turn-button in inside knob locks outside knob. Turning inside knob or F82-2

operating key in outside knob releases button automatically. Closing door does notrelease button. Button may be fixed in locked position by turning to horizontal position.Inside knob always free. Latchbolt automatically deadlocks when door is closed.

Classroom -03- Deadlocking latchbolt operated by knob from either side except when outside knob F84-2is locked from outside by key. When outside knob is locked, latchbolt is operatedby key in outside knob or by rotating inside knob.

Storeroom -05- Deadlocking latchbolt operated by key in outside knob or by rotating inside knob. F86-2Outside knob is always fixed.

Institution -09- Deadlocking latchbolt operated by key in knob from either side. Both knobs always F87-2fixed.

Privacy -20- Latch bolt operated by knob either side. Outside knob is locked by push button F76-2inside and unlocked by emergency release outside, rotating inside knob or closingdoor.

Passage -30- Latch bolt operated by knob from either side at all times. F75-2

v5

Limited availability of 2-3/8" U.L. backset

To Order, Specify:

Design: BA BAFunction: -00- EntranceFinish: 32D Satin Stainless SteelLatch: 234 2-3/4" Backset

Stock No. LengthAR-100CR-UC 6 pinAR-7100CR-UC 7 pinKeyways: 1D, AB, BB, DB, EB, FB, GB, HB, JB, KB, MB.Finishes: 4-Satin Brass, 26D-Satin Chrome

SMALL FORMAT CORES


Small Format Interchangeable CoreNow Available: (less core)IC-BA-00-32D 234 EntranceIC-BA-05-32D 234 StoreroomOrder core seperately, if needed.

INTERCHANGEABLE CORE


Act

See next page for PLG design

Lifetime Warranty

CAL-ROYAL

121(PL-4)

®ZIPF LOCK COMPANY

20 locks per casePOLYGON SERIES

Heavy Duty Cylindrical KnobsetANSI A156.2, Series 4000, Grade 2.U.L. Listed For 3 Hour Doors.Lifetime Warranty.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" with 1-1/8" wide face or

2-3/8" with 1" wide face, please specifySTRIKE: ASA. 1-1/4" x 4-7/8".BORE: 2-1/8" x 1"ROSE: 3"KEYWAY: 6-pin solid brass "C" keyway, furnished

KA-4. Other keyways may be available,please call with requirements.

FINISHES: 32D Stainless Steel

To Order, Specify:

Design: PLG PolygonFunction: -00- EntranceFinish: 32D Stainless SteelLatch: 234 2-3/4" Backset

DIGITAL KEYPAD LOCK GRADE 1

Heavy Duty3 hour fire rated. UL10C UBC7-2-1997.90 Different User Codes.10 Manager Codes. 5 Service Codes.Easy to Program using keypad. Easy installation.Non-handed and easy reversible. Weather resistant.Clutch mechanism.6 pin solid brass "C" keyway.

Stock No. FunctionCR-3000 26D Entrance*CR-3030 26D Passage*ICCR3000 26D Entrance for I/C***Special order only. Call for delivery time.**Accepts Best, Falcon, Arrow cores. Cores

sold seperately.

v3


Features-• 1 Master Code (all functions including entry)• 1 Sub-master Code (all functions including entry Except Master Code)• 10 Manager Code (perform SOME programming functions plus entry)• 90 Basic User Access Codes (Entry Only)• 5 Service Codes (“One-Time Entry” Codes)• Two User Disable Modes:

•All User Codes Disabled Except Master Code & Sub-master Code•All User Codes in a Bank Disabled Except Manager Codes

• 30-Second Keypad Anti-Tamper Lockout:•Keypad Lockout After 3 Unsuccessful User Code Entries

• Uses 4 AA cell batteries (comes standard in packaging)• A remote Push button can be wired to allow access when activated. (REM 1)• Fire Alarm System (REM 2) • Low Battery Warning

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" with 1-1/8" wide faceBORE: 2-1/8" x 1"FINISHES: 26D Satin Chrome


Act

LifetimeWarranty

BHMACERTIFIED

Function Stock No.Entrance PLG-00-32DClassroom PLG-03-32DStoreroom PLG-05-32DPrivacy PLG-20-32DPassage PLG-30-32D

See previous page forfunction descriptions


Act

CAL-ROYAL

122(PL-4)

®ZIPF LOCK COMPANY

PL7000 - GRADE 1

Heavy Duty Commercial Phone LockConforms with ANSI A156.2, Grade 1.U. L. Listed for 3 Hours Doors.Uses Key Butler App to connect withSamsung, Andriod and other popular NFCready smartphones.1 Administrator Code (Smartphone).127 Client codes (Smartphone or RFID cards).1023 Audit trail entries on door lock.10,000 Audit trail entries on admin phonethrough Key Butler App.Remote switch connector.Alarm system connector.Proximity card (13.56 MHZ).Enable & disable users mode.Passage mode.Weather resistant.Buzzer & LED indicators.Anti-tamper lockout.Long-life battery operation.Low battery warning.Emergency charge interface.Clutch tecnology.Non-handed, reversible.User Friendly.Easy installation & programming.


Act

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" standard. 2-3/8" optionalSTRIKE: ASA strikeBORE: See belowKEYWAY: Schlage C (SC1)FINISHES: US-10B (613) Oil Rubbed Bronze

US26D (626) Satin Chrome

Phone not included

PL7000 US10B, 26DLatch bolt operated by lever from either side, exceptoutside has to use a preprogrammed RFID card or aregistered smartphone to touch the face of the lock inorder to retract the latch upon turning the lever. Keyoverrides the use of the RFID card and smartphone.CRPRFID-7 Extra RFID card.

PROXIMITY CARD- 2 cards included. Compatible with existing MIFAREinfrastructure. Operates at 13.56 Mhz in accordance with ISO 14443A.Inductive distance up to 1-3/16"POWER SUPPLY- 4 AA 1.5V Alkaline Batteries (included). 1 year batterylife (10 unlock events per day).AUDIT TRAIL COMPACITY- 1023 audit trail entries on door lock. KeyButler App (through NFC) can sync and save up to 10,000 entries onphones.WEATHER RESISTANT- All models are weather resistant for operatingtemperature ranges of +149oF to -4oF and storage temperature ranges of+176oF to -22oF. Operating humidity: 5% to 95% relative humidity, non-condensing.NFC (Near Field Communication) INTERFACE- Use the Key ButlerSmartphone App to connect with all types of NFC ready smartphones.See www.nfcworld.com/nfc-phones-list/#available for a complete list.9V EMERGENCY BATTERY PORT- Is located under outside lever.ADMINISTRATOR CODE- A lock has only one Administrator at a timewhich manages all codes. Only smartphones are used as an Administrator.CLIENT CODES- Can accommodate up to 127 Client codes usingsmartphones or RFID cards.PASSAGE MODE- Once enabled, the unit is unlocked continuously until"Disable Passage Mode" is initiated.BATCH MODE- In cases that only cards will be used and no smartphonesavailable, PL7000 provides a method to add/delete RFID cards.RESTRICTED ACCESS RIGHT- PL7000 can be programmed to specifythe access period or intervals of users.USER INTERACTION THROUGH CLOUD- Administrator can remotelyadd, modify, delete and manage users through the internet.KEYPAD ANTI-TAMPER LOCKOUT- If an invalid code is entered 3 timesconsecutively, the unit will alarm 10 beeps and stay idle for 2 minutes.REMOTE SWITCH/RELEASE- PL7000 provides 2 remote switches. Eithercan by used for an emergency push button switch, or connected to alarmsystems such as fire alarms.

v1

CAL-ROYAL

123(PL-4)

®ZIPF LOCK COMPANY

RS2000 - GRADE 2

Heavy Duty Residential Phone LockConforms with ANSI A156.2, Grade 2.Uses Key Butler App to connect withSamsung, Andriod and other popular NFCready smartphones.1 Administrator Code (Smartphone).127 Client codes (Smartphone or RFID cards).1023 Audit trail entries on door lock.10,000 Audit trail entries on admin phonethrough Key Butler App.Proximity card (13.56 MHZ).Enable & disable users mode.Passage mode.Weather resistant.Buzzer & LED indicators.Anti-tamper lockout.Long-life battery operation.Emergency charge interface.Low battery warning.Clutch tecnology.Non-handed, reversible.User Friendly.Easy installation & programming.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/8" standard. 2-3/4" optionalSTRIKE: Full lipBORE: See belowKEYWAY: Schlage C (SC1)FINISHES: US-10B (613) Oil Rubbed Bronze

US-15 (619) Satin Nickel

PROXIMITY CARD- 2 cards included. Compatible with existing MIFAREinfrastructure. Operates at 13.56 Mhz in accordance with ISO 14443A.Inductive distance up to 1-3/16". (CRPRFID-2)POWER SUPPLY- 4 AA 1.5V Alkaline Batteries (included). 1 yearbattery life (10 unlock events per day).AUDIT TRAIL COMPACITY- 1023 audit trail entries on door lock. KeyButler App (through NFC) can sync and save up to 10,000 entries onphones.WEATHER RESISTANT- All models are weather resistant for operatingtemperature ranges of +149oF to -4oF and storage temperature rangesof +176oF to -22oF. Operating humidity: 5% to 95% relative humidity,non-condensing.NFC (Near Field Communication) INTERFACE- Use the Key ButlerSmartphone App to connect with all types of NFC ready smartphones.See www.nfcworld.com/nfc-phones-list/#available for a complete list.9V EMERGENCY BATTERY PORT- Is located under outside lever.ADMINISTRATOR CODE- A lock has only one Administrator at a timewhich manages all codes. Only smartphones are used as an Adminis-trator.CLIENT CODES- Can accommodate up to 127 Client codes usingsmartphones or RFID cards.PASSAGE MODE- Once enabled, the unit is unlocked continuouslyuntil "Disable Passage Mode" is initiated.BATCH MODE- In cases that only cards will be used and nosmartphones available, RS2000 provides a method to add/delete RFIDcards.RESTRICTED ACCESS RIGHT- RS2000 can be programmed tospecify the access period or intervals of users.USER INTERACTION THROUGH CLOUD- Administrator can remotelyadd, modify, delete and manage users through the internet.KEYPAD ANTI-TAMPER LOCKOUT- If an invalid code is entered 3times consecutively, the unit will alarm 10 beeps and stay idle for 2minutes.

RS2000 10B, 15Latch bolt operated by lever from either side, exceptoutside has to use a preprogrammed RFID card or aregistered smartphone to touch the face of the lock inorder to retract the latch upon turning the lever. Keyoverrides the use of the RFID card and smartphone.CRPRFID-2 Extra RFID card.

DOOR PREPARATION


Act

Phone not included

v1

CAL-ROYAL

124(PL-4)

®ZIPF LOCK COMPANY

CRCODE-200 - GRADE 2

Grade 2 Mechanical Push Button LockConforms with ANSI A156.2, Grade 2.Easy installation covers 161 prep.1 - 12 digit length code.Single code user.Easy on-door code change.Code-free option (Passage mode).Breakaway lever design.Weather resistant.Non-handed.More than 8000 non-sequential.code combinations.Applications:Offices, Schools, Hospitals, Apartments,Hotels/Motels, Residential, Commercial,and public buildings.

INSIDE

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 2-1/4"BACKSET: 2-3/4" standard. 2-3/8" special orderSTRIKE: ASA 1-1/4" x 4-7/8"BORE: See belowKEYWAY: Schlage 6-pin C (SC1)FINISHES: US-26D (626) Satin Chrome

Meets ADA requirements. Speciallydesigned for Barrier Free Applications.Meets A117.1 Accessibility Code.

CRCODE-202 26DLatch bolt operated by lever from either side, exceptoutside has to use a preprogrammed code on thekeypad in order to retract the latch upon turning thelever. Key overrides the use of the code.Default function: Storeroom,Optional function: Passage mode.

Single Code User-Only one code combination chosen from thousands ofcombinations can be set at a time to deter code breakers. Code length is from1 to 12 digits, and can be permutated with a non-repeating digit up to over 5000combinations.Easy On-Door Code Change-Code can be changed without removing the lockfrom the door and using only a "code change" key.1-12 Digit Code-An entry code can be a combination of 1 to 12 digits long. Thedigits can be entered in any order. For example, if the chosen 6-digit code is"5283XZ" it can be opened as "ZX3825" or "3X8Z25" or in any other combinationof the 6-digit code.Breakaway Lever Design-Lever will stay at the 5 o’clock position when forceddown without retracting the latch, to prevent breaking of handle and giving theimpression of the handle being broken to discourage or scare off vandals.Code-Free option (passage mode)-Once enabled, the lock remains unlockeduntil disable PASSAGE MODE is initiated.Weather Resistant-Can resist above or below normal weather conditionswithout compromising security.Non-Handed-Easily field reversible handing.

MECHANICAL PUSH BUTTON TRIMWITHBREAKAWAYLEVERFEATUREWorks with:2200, 9800 and7700 devices

CRCODE-204 26DFeatures:• Grade 2 Mechanical push button trim

for 2200, 9800 and 7700 devices.• Easy installation covers 161 prep.

See page 139 for more details on thisexit trim.

v3

CAL-ROYAL

125(PL-4)

®ZIPF LOCK COMPANY

ASHLEY SERIES

Residential DutyANSI A156.2, Grade 3.Reversible for Right or Left Hand Doors.25-year Mechanical Warranty*.5-year Finish Warranty*.Brass Trim and Brass Plated Levers.Brass Trim and Knob.Kwikset Keyway. Re-keyable forMaster and Construction Keying.

*On Premier, Signature & Ritz only

Design: PRE Premier LeverFunction: -00- EntranceFinish: US3 Bright BrassLatch: RCAL Adjustable R.C.

SIGNATURE(SIG)US-3, 5, 26, 26D

ELITE(ELI)US-3, 5, 15A, 26, 26D

"LE" Available

"LE" Available

"LE" Available

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: Adjustable 2-3/8" or 2-3/4"

with round corner face.STRIKE: Round corner full lipBORE: 2-1/8" x 1"ROSE: 2-5/8"KEYWAY: Kwikset 1063P (KW1).

Locks furnished KA-3 except"LE" and 05 function KD.

FINISHES: US3 (605) Bright BrassUS5 (609) Antique BrassUS-10B (613) Oil Rubbed BronzeUS-15 (619) Satin NickelUS15A (620) Antique NickelUS26 (625) Bright ChromeUS26D (626) Satin Chrome

HARTFORD(HAR)US-3, 5, 26D

PREMIER(PRE)US-3, 5, 10B, 15, 15A, 26, 26D

To Order, Specify:

RITZ(RIZ)US-3, 5, 15, 26, 26DBRAVO(BRV)

US-3, 5, 15A, 26, 26D

"LE" Available—The Premier, Elite, Mil-lennium and Signature are availablewith a keyed lever in the entry function.Just prefix "LE" to stock no. (EX: LEPRE-00-US3). Specify hand on LEPRE-00functions

"LE" Available

Discontinued-see next page.Call for closeout prices

Levers: 24 locks per caseKnobs: 36 locks per case

Discontinued-see next page. Call for closeout prices



SUPER SPECIAL PRICING AVAILABLE ON ITEMS MARKED WITH - SUPPLIES LIMITED - PLEASE INQUIRE.

MILLENNIUM(MIL)US-3, 5, 15A, 26, 26D

Function No. OperationEntry 00- Key from outside or turn button inside locks or unlocks both outside knob and

inside knob/lever.

Storeroom (Vestibule) 05- Plain inside knob, always free. Outside knob always locked.

Privacy (Bed & Bath) 20- Turning button inside locks both knobs/levers. Emergency entry from outside.

Passage (Hall & Closet) 30- Plain knobs/levers on both sides.

Dummy 40- Single dummy trim for one side of door. Pull only.

•Keyed lever locks have Bravo (ball) knob on exterior. Vestibule (05) available in BRV and RIZ design only.

v5

CAL-ROYAL

126(PL-4)

®ZIPF LOCK COMPANY

BERMUDA(CH-BER)US-3, 10B, 15, 26D

MAYFAIR(CH-MAY)US-3, 10B, 15

Handed

AUSTIN(CH-AUS)US-3, 10B, 15

Non-Handed

LENOX(CH-LEN)US-3, 5, 10B, 15, 26D

Non-Handed

SOPHIA(CH-SOP)US-3, 10B, 15

Non-Handed

CHELSIE SERIES

Residential DutyANSI A156.2, Grade 3.25-year Mechanical Warranty.5-year Finish Warranty.Brass Trim and Brass Plated Levers.Brass Trim and Knob.Kwikset Keyway. Re-keyable forMaster and Construction Keying.

Dummy: 36 locks per caseLevers: 24 locks per caseKnobs: 36 locks per case

SPECIFICATIONSDOOR THICK.: 1-3/8" to 1-3/4"BACKSET: Adjustable 2-3/8" or 2-3/4"

with round corner face.STRIKE: Round corner full lipBORE: 2-1/8" x 1"ROSE: 2-5/8"KEYWAY: Kwikset 1063P (KW1).

Locks furnished KA-3.FINISHES: US-3 (605) Bright Brass

US-5 (609) Antique BrassUS-10B(613) Oil Rubbed BronzeUS-15(619) Satin NickelUS-15A (620) Antique NickelUS-26D(626) Satin ChromeUS-32D Stainless Steel

To Order, Specify:

Design: CH-MAY Mayfair LeverFunction: -00- EntranceFinish: US3 Bright Brass*Handing: RH Right HandLatch: RCAL Adjustable R.C.*only required on Mayfair design.

Function No. OperationEntry 00- Key from outside or turn button inside locks or unlocks both outside knob and

inside knob/lever.

Privacy (Bed & Bath) 20- Turning button inside locks both knobs/levers. Emergency entry from outside.

Passage (Hall & Closet) 30- Plain knobs/levers on both sides.

Dummy 40- Single dummy trim for one side of door. Pull only.

Other finishesmay be availableby special order.

All entrance levers havea lever on the exteriorand the interior.

BRISTOL(CH-BRI)US-3, 10B, 15, 26D

Non-Handed

C-Keyway also available in these locksCH-CBER-00 in US3, 10B, 15, 26D finishCH-CBRI-00 in US3, 10B, 15, 26D finishCH-CLEN-00 in US3, 10B, 15, 26D finishCH-CMAY-00 in US10B, 15 finishCH-CREN-00 in US3, 15, 32D finish

RENO(CH-REN)US-3, 5, 10B, 15,

15A, 32D

v4

CAL-ROYAL

127(PL-4)

®ZIPF LOCK COMPANY

20 locks per caseCB SERIES

Commercial/Residential Duty DeadboltANSI A156.5 Grade 2Lifetime Warranty.Deadbolt has 1/4" free spinning anti-cutthrough pin2-1/2" diameter adapter ring for 2-1/8" doorpreparations.6-pin cylinder. "C" keyway.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: Adjustable 2-3/8" or 2-3/4" with

square corner face.STRIKE: 1-1/8" x 2-3/4" square cornerBOLT THROW: 1"BORE: 1-1/2" or *2-1/8" x 1"KEYWAY: "C" keyway (SC1/SC4)

Furnished keyed different (KD)FINISHES: US3 (605) Bright Brass


*Must use adapter ring for 2-1/8" hole.

To Order, Specify:

Function: CB160 Single CylinderFinish: US3 Bright BrassLatch: AL Adjustable S.C.• All locks are stocked Keyed Different (KD)

Adapter ring includedin package

Stock No. DescriptionCB160 Single CylinderCB162 Double Cylinder

GL SERIES GRADE 2

Commercial/Residential Duty Gate LatchLifetime warranty.2-1/2" diameter adapter ring for 2-1/8" doorpreparations.6-pin cylinder. "C" keyway.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/8" square corner face or

2-3/4" square corner faceSTRIKE: 1-1/8" x 2-3/4" square cornerBOLT THROW: 1"BORE: 1-1/2" or *2-1/8" x 1"KEYWAY: "C" keyway (SC1/SC4)

Furnished keyed different (KD)FINISHES: 26D (626) Satin Chrome*Must use adapter ring for 2-1/8" hole.

• Single CylinderStock No. BacksetGL160 26D 238 2-3/8" backsetGL160 26D 234 2-3/4" backset

IND SERIES GRADE 3

Light Commercial/Residential DutyIndicator Deadbolt

Conforms to ANSI A156.5, Grade 3.ADA Ergonomic thumb turn.Red (locked) and Green (unlocked) indicator.Sturdy, all steel latch case and mechanism.Coin edge slot for emergency openings.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: Adjustable 2-3/8" or 2-3/4" square corner faceSTRIKE: 1-1/8" x 2-3/4" square cornerBOLT THROW: 1"BORE: 1-1/2" or 2-1/8" x 1"FINISHES: US3 (605) Polished Brass


Stock No. FinishIND84 US3 AL Polished BrassIND84 26D AL Satin Chrome

LifetimeWarranty

v5

CAL-ROYAL

128(PL-4)

®ZIPF LOCK COMPANY

20 locks per caseCRB800 SERIES

Maximum SecurityHeavy Duty Deadbolt

ANSI A156.5, Grade 1.U.L. Listed for 3 hour door.Lifetime Warranty. BHMA Certified.1"Throw High Strength Steel AlloyDeadbolt With 1/4" Free SpinningAnti-saw Pin.Free Turning, Wrench-resistantTapered Cylinder Ring.Cylinder Recesses Into Door to ResistBlows Attempting to Move the Lock.Steel Plate Mounting.Strike: 3" Screws with Wood FrameReinforcer Greatly Strengthens DoorFrames.Solid Brass 6-pin Cylinder. "C"Keyway.

With Standard Cylinder—Stock No. DescriptionCRB-800 Single CylinderCRB-700 Double Cylinder

**For Small Format Core—Stock No. DescriptionIC-CRB-800 Single CylinderIC-CRB-700 Double Cylinder

To Order, Specify:

Function: CRB-800 Single CylinderFinish: 26D Satin ChromeLatch: 234 2-3/4" Backset• All locks are stocked Keyed Different (KD)

CHELSIE SERIES

Residential DutyANSI A156.2, Grade 3.25-year Mechanical Warranty.5-year Finish Warranty.All metal body & cylinder construction.All exterior parts are brass.Kwikset Keyway. Re-keyable forMaster and Construction Keying.

36 locks per case

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: Adjustable 2-3/8" or 2-3/4" with round corner

face. Drive-in latch optional.STRIKE: Full Lip, Round corner, 1" x 2-3/4"BOLT THROW: 1" w/hardened steel pin to prevent saw cutting.BORE: 2-1/8" x 1"KEYWAY: Kwikset 81063 (KW1). Locks furnished KA-3FINISHES: US3 (605) Bright Brass

5(609) Antique Brass10B (613) Oil Rubbed Bronze15 (619) Satin Nickel26D(626) Satin Chrome

To Order, Specify:

Function: CH-ED500 Single CylinderFinish: US10B Oil Rubbed BronzeLatch: RCAL Adjustable R.C.• All locks are stocked Keyed Alike (KA3)

SPECIFICATIONSDOOR THICKNESS: 1-1/2" to 2"BACKSET: 2-3/4" square corner face.STRIKE: Square corner, 1-1/8" x 2-3/4"

with 3" screws.BOLT THROW: 1"BORE: 2-1/8" x 1"KEYWAY: 6 pin solid brass "C" keyway

Furnished keyed different (KD)I/C: Will accept 6 or 7 pin Best, Arrowor Falcon small format cores.

FINISHES: 26D (626) Satin Chrome

Stock No. DescriptionCH-ED-500 Single CylinderCH-EDD-400 Double Cylinder

Stock No. LengthAR-100CR-UC 6 pinAR-7100CR-UC 7 pinKeyways: 1D, AB, BB, DB, EB, FB, GB, HB, JB, KB, MB.

Finishes: 4-Satin Brass, 26D-Satin Chrome


**Cores not included - order separately.See below for cores.


Act

v6

CAL-ROYAL

129(PL-4)

®ZIPF LOCK COMPANY

20 locks per case


square corner face.STRIKE: Square corner, 1-1/8" x 2-3/4"BOLT THROW: 1"BORE: 2-1/8" x 1"KEYWAY: 6 pin solid brass "C" keyway

Furnished keyed different (KD)FINISHES: US3 (605) Bright Brass


T300 SERIES

Heavy Duty DeadboltANSI A156.5, Grade 2.U.L.Listed 3 hours.Lifetime Warranty.Extra Security 1" Throw bolt with 1/4"free spinning Anti-saw PinCylinder Recesses Into Door to ResistBlows Attempting to Move the Lock.Solid Brass 6-pin Cylinder. "C"Keyway.

To Order, Specify:

Function: T360 Single CylinderFinish: US3 Bright BrassLatch: AL Adjustable S.C.• All locks are stocked Keyed Different (KD)

DIGITAL KEYPAD DEADBOLT

Commercial & Residential DeadboltHeavy Duty Grade 2.U.L.Listed for 45 minutes.Meets A117.1 accessibility code, BHMA Certified.10 User codes. 4-6 digit codes.Includes 2 remote controls.Available in KW1 or SC1 keyways.


Act

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 2"BACKSET: Adjustable 2-3/8" or 2-3/4" with

square corner face.STRIKE: Square corner, 1-1/8" x 2-3/4"BOLT THROW: 1"BORE: 2-1/8" x 1"

KEYWAY: KW1-Kwikset Keyway orSC1-Schlage Keyway

REMOTES: Includes 2 remote controlsFINISHES: US3 (605) Bright Brass

11P Aged Bronze15 (619) Satin Nickel

To Order, Specify:

Function: ELDB-89 Single CylinderFinish: 15 Satin NickelKeyway: KW1 Kwikset Keyway• All locks are stocked Keyed Different (KD)

OutsideInside

FEATURES—• 4-6 digit codes with over 1 millionpossible combinations

• 10 user codes• Non-handed design• Stand alone unit. No wiring needed.• Remote control locking / UnlockingIlluminated Keypad

• Weather Resistant• 1 min lockout after 4 invalid input• Easy Installation & Programming• Long-Life battery operation• Auto-Locking Function (OPTION)• Low-Battery Warning Indicator• Back-up key cylinder override• User Friendly

Includes2 remotecontrols

Stock No. DescriptionULT360 Single CylinderULT362 Double Cylinder


Act

v3

- Limited Supply Available -

CAL-ROYAL

130(PL-4)

®ZIPF LOCK COMPANY

T220 SERIES

Standard Duty DeadboltANSI A156.5 Grade 31-year Mechanical Warranty.1" Throw Bolt. All steel latch caseand mechanism.Rotating Trim Ring.Ergonomic ADA Thumbturn.Solid Brass 6-pin Cylinder. "C" Keyway.Available with interchangeable core forBest, Falcon and Arrow.

20 locks per case

To Order, Specify:

Function: T220 Single CylinderFinish: US3 Bright BrassLatch: AL Adjustable• All locks are stocked Keyed Different (KD)

20 locks per caseLSD SERIES

Standard Duty DeadboltANSI A156.5 Grade 3.1-year Mechanical Warranty.1" Throw Bolt With Two Free SpinningAnti-cut Through Pins.Ergonomic ADA Thumbturn.Rotating Trim Ring.Solid Brass 6-pin Cylinder. "C"Keyway.

To Order, Specify:

Function: LSD-01 Single CylinderFinish: 15 Satin NickelLatch: AL Adjustable S.C.• All locks are stocked Keyed Different (KD)

Stock No. DescriptionLSD-01 Single CylinderLSDD-88 Double Cylinder

(pictured)


square corner face.STRIKE: Square corner, 1-1/8" x 2-3/4"BOLT THROW: 1"BORE: 2-1/8" x 1"KEYWAY: 6 pin solid brass "C" keyway

Furnished keyed different (KD)FINISHES: US3 Bright Brass

10B Oil Rubbed Bronze15 Satin Nickel32D Stainless Steel

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/8" to 2-3/4" adjustable latch

with square corner faceSTRIKE: Square corner, 1-1/8" x 2-3/4"BOLT THROW: 1"BORE: 1-1/2" or 2-1/8" x 1"KEYWAY: 6 pin solid brass "C" keyway

Furnished keyed different (KD)FINISHES: US3 Bright Brass

15 Satin Nickel26D Satin Chrome

Stock No. DescriptionT220 Single Cylinder - "C" kwyIC-T220 Single Cylinder - for small format I.C.*T330 Double Cylinder - "C"kwy (pictured)*Core not included, order separately.

T400 SERIES

Heavy Duty DeadboltANSI A156.2 Grade 2Lifetime Warranty.1" Throw High Strength Steel AlloyDeadbolt with Anti-saw Pin.Rotating Trim Ring.Available 6-pin "C" or5-pin Kwikset KW1 keyway.

20 locks per case

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 2"BACKSET: 2-3/8" to 2-3/4" adjustable latchSTRIKE: Square corner, 1-1/4" x 2-3/4"BOLT THROW: 1"BORE: 1-1/2" or 2-1/8"KEYWAY: 6 pin solid brass "C" keyway or

5 pin Kwikset KW1 keywayFINISHES: US3 Bright Brass

15 Satin Nickel26D Satin Chrome

Stock No. DescriptionT460 Single Cylinder 6 pin "C"T462 Double Cylinder 6 pin "C"KWT460 Single Cylinder 5 pin Kwikset KW1KWT462 Double Cylinder 5 pin Kwikset KW1

To Order, Specify:

Function: T460 Single Cylinder "C"Finish: 15 Satin NickelLatch: AL Adjustable• All locks are stocked Keyed Different (KD)


Act

Lifetime Warranty

v5

CAL-ROYAL

131(PL-4)

®ZIPF LOCK COMPANY

HIL-

10 locks per caseHIL SERIES - GRADE 2

Interconnected LockANSI A156.12, Grade 2.U.L. Listed for 3 Hour Doors.Lifetime Warranty. BHMA Certified.Full 1" Throw Deadbolt With Hardenedsteel roller to prevent saw cutting.6-7/8" x 2-5/8" Stainless Steel orBrass Plated Escutcheon for Interior.Precision Solid Brass 6-pinCylinder. "C" Keyway.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" with 1-1/8" wide

square corner faceSTRIKE: T strike with leverset

2-3/4" x 1-1/8" deadbolt strikeDEADBOLT THROW: 1"LATCH THROW: 1/2"BORE: Two holes: 2-1/8" x 1"SPACING: 4" center to centerESCUTCHEON: 6-7/8" X 2-5/8"KEYWAY: 6 pin solid brass "C" keyway

Furnished keyed different (KD)FINISHES: US3 (605) Polished Brass

JHIL SERIES - GRADE 2

Adjustable Interconnected LockAdjustable for 4" and 5-1/2" CTC

ANSI A156.12, Grade 2.U.L. Listed for 3 Hour Doors.Lifetime Warranty.Full 1" Throw Deadbolt With Hardenedsteel roller to prevent saw cutting.Precision Solid Brass 6-pinCylinder.

SPECIFICATIONSDOOR THICKNESS: 1-3/8" to 1-3/4"BACKSET: 2-3/4" with 1-1/8" wide square cornerSTRIKE: T strike, 2-3/4" x 1-1/8" deadbolt strikeDEADBOLT THROW: 1"LATCH THROW: 1/2"BORE: (Two holes) Top hole: 1-1/2" or 2-1/8" x 1'

Bottom hole: 2-1/8" x 1"SPACING: 4" or 5-1/2" center to centerESCUTCHEON: 9-11/16" x 3-1/2"KEYWAY: 6 pin solid brass

Furnished keyed different (KD)FINISHES: 3 (605) Polished Brass


Stock No. DescriptionHIL-30 Entrance-Single LockingDeadbolt thrown or retracted by key in upper lock from outside or byinside turn unit. Latchbolt retracted by lever from either side. Leverretracts deadbolt and latchbolt simultaneously for immediate exit.

To Order, Specify:

Function: HIL-30 Single CylinderFinish: US3 Bright BrassLatch: 234 2-3/4" Backset• All locks are stocked Keyed Different (KD)


Act

10 locks per case

JHILMANUS-10B, 15

Inside

JHILUS-3, 15, 26D

Adjustable for 4" or 5-1/2"center to center spacing.

Entrance-Single LockingDeadbolt thrown or retracted by key in upper lock from outside or by inside turn unit. Latchboltretracted by lever from either side. Lever retracts deadbolt and latchbolt simultaneously forimmediate exit.Stock No. KeywayJHIL30 * 234 KW1 KwiksetJHIL30 * 234 SC1 Schlage*Specify Finish: 3, 15, 26DStock No. KeywayJHIL30MAN * 234 SC1 Schlage*Specify Finish: 10B, 15

LifetimeWarranty Meets the

Buy AmericanAct

NOTE-No cylinder in leveras pictured.

Stock No.For Schlage Large FormatInterchangeable CoresICSCJHIL30 26D

v5

CAL-ROYAL

132(PL-4)

®ZIPF LOCK COMPANY

M SERIES - GRADE 2Heavy Duty Mortise Lock

ANSI A156.13-1 80,Series 1000 Grade 1.U.L. Listed for 3 Hour Doors.Lifetime Warranty. BHMA Certified.1" Throw Heavy Duty Deadbolt With Anti-saw Hardened Pins.Handed. Easily Reversible in Field.100% Internal Parts Quality InspectionProvides Security, Reliability and Durability.Precision Solid Brass 6-pinCylinder. "C" Keyway.

6 locks per case

SPECIFICATIONSDOOR THICKNESS: 1-3/4"BACKSET: 2-3/4"DEADBOLT THROW: 1"LATCH THROW: 3/4"KEYWAY: *Schlage CCYLINDER: Mortise with clover camCASE: 4.15" x 5.82" x .85"ARMORED FRONT: 8" x 1-1/4" x 3/32"FINISH: 26D (626) Satin Chrome

SE TEKE

Escutcheons:8" x 2" x 7/16"

Clover Cam

SS

TS

Function No. Operation ANSIPassage M8010 Latchbolt operated by lever from either side at all times. F01

Privacy M8040 Latchbolt operated by lever from either side except when turnpiece projects deadbolt F02and locks outside lever. Unlock by turning inside lever or by using emergency keywhich retracts the deadbolt.

Office M8050 Latchbolt operated by lever from either side except when outside lever is made in- F04operative by push button rocker. When outside lever is locked, latchbolt may beretracted by key from outside or by rotating inside lever.

Classroom M8070 Latchbolt operated by lever from either side except when outside lever is locked from F05outside by key. When outside lever is locked, latchbolt may be retracted by insidelever, or outside lever, when cylinder is unlocked by key.

Storeroom M8080 Latchbolt operated by key from outside or by rotating inside lever. Outside lever F07always inoperative.

Entrance M8453 Latchbolt operated by lever from either side except when outside lever is made in- F20operative by push button rocker. Deadbolt projected by key from outside and by thumb-turn from inside. Deadbolt retracted by key from outside. Both bolts retracted by insidelever (simultaneous retraction).

Corridor/Exit M8456 Latchbolt operated by lever from either side. Deadbolt projected by key from outside and F20thumbturn from inside. Rotating inside lever retracts both bolts (simultaneous retraction).Extended deadbolt automatically deadlocks deadbolt.

To Order, Specify:

Function: M8453 EntranceDesign: -SS SS TrimFinish: -26D Satin ChromeNot all functions are available in all designs.

*Other keyways available - please contact us.

v5

CAL-ROYAL

133(PL-4)

®ZIPF LOCK COMPANY

NOTE—The data on the cross reference chart represents Cal Royal's judge-ment of which are most similar. Since no product is exactly alike theinformation has been obtained from trade sources. It is not guaranteed norrepresented that any specific products exactly equals any other product. Doorcloser body size may be different.

9

Cross Reference ChartCAL ROYAL CR-801

Corbin DC3200Dorma 8600FCLCN 1460FCNorton 8501Russwin DC6200Sargent 1431Yale 3501Door-o-matic SC80FC

Cross Reference ChartCAL ROYAL CR-801S

Corbin DC3200xM76Dorma 8600LCN 1460-72Norton 8301Russwin 9000Sargent 1430Yale 3301Door-o-matic SC-80

Sex Bolts, female part only 1/4" x 20CR-970 1-3/8" US-10, 26D Set of 4CR-970 1-3/4" US-10, 26D Set of 4

Hole pattern same as Norton 8301/8501

Stock No. FinishCR-801 ALUM or DUROCR-801S ALUM or DURO

801 has full cover801S has slim cover (pictured)

CR801 SERIES DOOR CLOSER

Meets the highest industry standards, ANSI 156.4, GRADE 1.U.L. Listed, Conforms to standards UL10C and UBC7-2-1997.Lifetime Warranty. BHMA Certified.Heavy-duty double lever arm with extra smooth action full feature multi-sizecommercial door closer for use in office buildings, shopping centers, andother commercial buildings.Barrier Free, meets ADA regulations. Adjustable size 1-6.Included: Parallel Bracket, wood screws & self tapping machinescrews, cover, sex bolts.Standard back-check function.For 30-260 lbs door weight.

A. Length of closer: 12-3/4"B. Horizontal Mounting Holes:12"C. Vertical Mounting Holes: 3/4"D. Width of Closer Body: 1-1/4"E. Projection from Door: 2-1/8"

CAL-ROYAL LATCHES 2-3/8" Square Face 2-3/8" D.I. 2-3/4" Square Face 2-3/4" D.I.

Barrington / Pioneer / PLG Latch ZL-535 (BAS-238) ZL-660 (SLDR-5) ZL-536 (BAS-234) ZL-661 (SLDR-2)

Barrington / Pioneer / PLG Deadlatch ZL-537 (BAD-238) ZL-662 (SLDR-4) ZL-538 (BAD-234) ZL-663 (SLDR-1)

Barrington / Pioneer / PLG Deadlatch ZL-636 (SLD-334) 3-3/4" square face deadlatch

Barrington / Pioneer / PLG ZL-635 (SL-5) 5" link, for use with 2-3/4" latch/deadlatch

Genesys Latch ZL-539 (GNS-238) ZL-540 (GNS-234)

Genesys Deadlatch ZL-541 (GND-238) ZL-542 (GND-234)

GL-160 Latch ZL-667 (GL238) ZL-668 (GL234)

CRB Deadbolt ZL-657 (B800-238) ZL-658 (B800-234)

Astor / SG / HIL / JHIL Passage ZL-651(ULSHIL238) ZL-654(ULSHIL234)

Astor / SG Privacy ZL-652 (ULSLS238) ZL-654(ULSHIL234)

Astor / SG Deadlatch ZL-653 (ULHIL238) ZL-656 (ULHIL234)

JHIL-30 Adj. Deadbolt ZL-640 (ULJHIL) ZL-640 (ULJHIL)

T220 / T330 Deadbolt ZL-664(T22DRI-238) ZL-665(T22DRI-234)

CH-ED-500 / CH-EDD-400 ADJ ZL-638 (EDRIVIN) ZL-638 (EDRIVIN)

CH- Knobset Deadlatch ZL-720 (4DRIVE2-1) 4-way adjustable drive-in w/removeable square corner faceplate

CH- Leverset Deadlatch ZL-721 (4DRIVE2-2) 4-way adjustable drive-in w/removeable square corner faceplate

CH- Knobset Privacy/Passage ZL-722 (4DRIVP2-1) 4-way adjustable drive-in w/removeable square corner faceplate

CH- Leverset Privacy/Passage ZL-723 (4DRIVP2-2) 4-way adjustable drive-in w/removeable square corner faceplate

6 closers per case

v5

CAL-ROYAL

134(PL-4)

®ZIPF LOCK COMPANY

CR441 SERIES DOOR CLOSER6 closers per case

Full Cover Multi-size Full Feature CloserANSI 156.4 Grade 1, UL ListedLifetime Warranty. BHMA Certified.

CR441

CR441

TABLE OF SIZESClosing power of CR441 Seriesclosers may be adjusted 50%.—> shows recommended rangeof door width for closer size.

TO ORDER, SPECIFY:

Stock No. and FinishStock No. DescriptionCR-441 Regular ArmCR-441DA Delay Action ArmFinishes: ALUM Aluminum

DURO DuronodicGOLD Gold

(US-3, 26 Special Order)

Closer Arms (sold separately)CR3077SPAS Super rigid parallel arm stopper, non handed.CR3049HOSRPS Same as above BUT for hold openCR3049HO Hold open arm w/parallel bracketSpecify finish: ALUM or DURA

Universal application. Non-handed for standard, top-jamb or parallel arminstallations.U.L. Listed. Conforms to standards UL10C & UBC7-2-1997Non-sized, 1 thru 6, FACTORY PRESET SIZE 3 meets ADA.For 30-260 lbs door weight.Standard back-check function.Adjustable closing and latching speed by two separate regulating valves.Optional adjustable delayed action (DA). Preset at factory for approximately20 seconds, between 70o and 0o. Delay time easily adjustable up to 1 minute. (CR-441DA)Heavy-duty double lever arm with extra smooth action full feature multi-sizecommercial door closer for use in office buildings, shopping centers and othercommercial buildings.Heavy-duty cast iron body with high-tensile oil-tempered steel spring.Self tapping screws and closer gauge for easy adjustment is standard.Standard full plastic cover.Included: Parallel Bracket, wood screws & self tapping machinescrews, full cover, sex bolts.


Same hole pattern asLCN 4040/4041

v5

CAL-ROYAL

135(PL-4)

®ZIPF LOCK COMPANY

900 SERIES DOOR CLOSER

Full Cover Multi-size Full Feature CloserANSI A156.4 Grade 1, UL ListedLifetime Warranty. BHMA Certified.


Universal Model Barrier-Free ComplianceANSI A156.4, Grade 1, UL ListedLifetime Warranty.

300-PBFCOV: Non-sized, fully adjustable 1 through 4, (Barrier Free ADA)interior doors. Full plastic cover. For 30-185 lbs door weight.300-PCOV: Non-sized, fully adjustable 3 through 6, (Barrier Free ADA)exterior doors. Full plastic cover. For 85-260 lbs door weight.U.L. Listed. Conforms to standards UL10C & UBC7-2-1997.Hydraulic closer with standard adjustable backcheck valve.Universal Mounting - standard size #4 mounting holes. (9-1/16").Dual valve, closing and latching speed controlled by two separateregulating valves.Universal application, non-handed, designed for all standard installations.Reinforced type adjustable tube arm.Rack and pinion operation contained in a high tensile precision cast withneedle bearing aluminum housing for the highest quality.High quality hydraulic fluid for high lubricity and constant lubrication.The streamlined design permits installation on most commercial andresidential applications without adapters.Power adjustment bracket on regular arms. (15% adjustment, + 7-1/2%)Included: Parallel bracket, Wood screws and self tapping machinescrews, cover.

10 closersper case

TO ORDER, SPECIFY: Stock No. and Finish


Stock No. DescriptionCR-900-PBF Barrier FreeCR-N900-PBFDA BF/Delay ActionFinishes: ALUM Aluminum

DURO DuronodicGOLD GoldUS3 Bright Brass

TO ORDER, SPECIFY:

Stock No. and Finish

Can be used for retrofit of: Norton 1600 (Sizes 4, 5 or 6)and Yale 50 (sizes 4, 5 or 6)

See Comparison Chart on page 134

Closer Arms (sold separately)CR-SPAS/900 Super rigid parallel arm stopper, non handed.CR-HOSRP/900 Same as above BUT for hold openCR-901/902 Hold open arm w/parallel bracketSpecify finish: ALUM or DURA

6 closers per case

Stock No. DescriptionCR-300-PCOV Barrier Free - ExteriorCR-300-PBFCOV Barrier Free - Interior

Finishes:ALUM AluminumDURO DuronodicGOLD GoldUS3 Bright Brass

LifetimeWarranty

Universal application. Non-handed for standard, top-jamb orparallel arm installations.U.L. Listed. Conforms to standards UL10C & UBC7-2-1997For 30-260 lbs door weight.Standard adjustable back-check function.Adjustable closing and latching speed by two separate regulatingvalves.Barrier free, adjustable size 1-6 (factory preset size 3). MeetsADA regulations. Engineered with reduced spring power toprovide easier opening for handicapped or elderly.Optional adjustable delayed action (DA). Preset at factory forapproximately 20 seconds, between 70o and 0o. Delay time easilyadjustable up to 1 minute. (CR-N900-PBFDA)Included: Parallel Bracket, wood screws & self tappingmachine screws, full plastic cover, sex bolts.US3-includes: metal cover, full arm, screws and parallel bracket.


v4

CAL-ROYAL

136(PL-4)

®ZIPF LOCK COMPANY


Universal Model (Universal Hole Pattern)Meets & Exceeds ANSI 156.4 Grade 1. UL ListedLifetime Warranty. BHMA Certified.


Universal ModelMeets & Exceeds ANSI 156.4 Grade 2. UL Listed5 Year Warranty

10 closers per case

Dual valve, closing and latching speed controlled by two separateregulating valves.Universal application, non-handed, designed for all standard installations.Reinforced type adjustable tube arm.Rack and pinion operation contained in a high tensile precision castaluminum housing for the highest quality.High quality hydraulic fluid for high lubricity and constant lubrication.The streamlined design permits installation on most commercial andresidential applications without adapters.Power adjustment bracket on regular arms. (15% adjustment, + 7-1/2%)Regular arm, Parallel arm. Parallel bracket, machine & wood screwsincluded.Universal hole pattern. (Size [3] 430-P)




Stock No. Size*CR-720 2CR-730 3CR-740 4CR-740BC 4CR-750 5*With regular / parallel arm.BC-Optional Back Check.

Finishes:ALUM AluminumDURO Duronodic

CAN BE USED FOR RETROFIT OFNORTON 1600 AND YALE 50


Stock No. Size*CR-420-P 2CR-430-P** 3*With regular arm/parallel arm.**Universal hole pattern

Finishes: ALUM AluminumDURO Duronodic


8 1/ "8

10 closers per case

Hydraulic door closer with dual valve, closing and latching speedcontrolled by two separate regulating valves.Universal application, non-handed, designed for all standard installations.Reinforced type adjustable tube arm.Rack and pinion operation contained in a high tensile precision castaluminum housing for the highest quality.High quality hydraulic fluid for high lubricity and constant lubrication.The streamlined design permits installation on most commercial andresidential applications without adapters.Power adjustment bracket on regular arms. (15% adjustment, + 7-1/2%)Included: Parallel Bracket, Machine and wood screws.Optional Back Check controlled by separate regulating valveon closers CR-740BC Alum or Duro.

v4

CAL-ROYAL

137(PL-4)

®ZIPF LOCK COMPANY

GLS7700 SERIES EXIT DEVICES

Rim Type Narrow Stile Exit DeviceIdeal for Aluminum Glass DoorsANSI 156.3 Grade 1, UL ListedLifetime Warranty

GLS7700EO—For use in institutions, schools, universities, commercial buildings where heavyduty reliable operation is a requirement. Trims are thru bolted for additionalsecurity. Conforms and meets ADA Regulations. UL Listed for Panic andULC10C, UBC 7-2-1777 codes.

SPECIFICATIONS—FOR DOORS: Wood, Metal or Aluminum Glass doors with 1-3/4" minimum stilewidth. For 1-3/4" door thickness for single or double applications.CHASSIS: Non-ferrous alloy (panic grade)COVER: Non-ferrous plated material.MOUNTING: Furnished with wood and machine screws.END CAP: Brass, bronze or stainless steel construction.ALARM: Available by special order.HAND: Non handed.LATCHBOLT: Stainless steel 3/4" throw.SPRING: Stainless steel throughout.ANSI STANDARD: A156.3, Grade 1.RAIL ASSEMBLY: Heavy gauge extruded aluminum body with stainless steelpush pad.STRIKE: 246 packed standard.DOGGING FEATURE: Allen-type key furnished.MULLION: Special order.DOOR SIZE: GLS7700EO36 for 36" doors. (26" to 36” door width). Actuallength: 34-9/64”, max cut down: 10”CENTER CASE: 8-1/16" x 2-3/4" x 2-1/2"PROJECTION: Neutral: 3-5/8", Depressed: 2-7/8".PUSH RAIL HEIGHT TO FINISHED FLOOR: 41" at center.FINISHES: 10B-Oil Rubbed Bronze, 32D-Stainless Steel.


Act

LifetimeWarranty

Free-wheeling clutch mechanism.Grade 1, thru-bolted design. Reversible design.Hardened steel heavy duty tailpiece. Available for rim andconcealed vertical rod exit devices.6 pin solid brass "C" keyway mortise cylinder standard.Optional keyways possible If other keyway required.Standard door thickness is 1-3/4".Width: 1-13/16", Length: 8", Lever Length: 4-3/4".

TRIMS - Order separately.

Entrance Function-GLSRIM9800 10B Oil Rubbed BronzeGLSRIM9800 26D Satin Chrome

3/4" Stainless SteelLatch Bolt

Push Rail

Casted Chassis& Assembly Mounting Rail Sliding Shim

Dogging Feature End Cap

GLS7700EO 36" Exit OnlyUS-10B, 32D

CAM105When you replace the cam on theGLSRIM9800 trim with this cam thefunction will convert from entrancefunction to a storeroom function.

246 Strike

v4

CAL-ROYAL

138(PL-4)

®ZIPF LOCK COMPANY

ENT00L Entrance

7700 SERIES EXIT DEVICES

Rim Type Push Bar Exit DeviceANSI 156.3 Grade 1, UL LIstedLifetime Warranty

7700EO—For use in institutions, schools, universities, commercial buildings where heavy dutyreliable operation is a requirement. Trims are thru bolted for additional security. Conformsand meetsADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1997 codes.

SPECIFICATIONS—FOR DOORS: For 1-3/4" door thickness. 4-1/2"minimum stile width required for single ordouble door applications using standard 938 strike and pull lever, thumbpiece orescutcheon trims.CHASSIS: Nonferrous alloy (panic grade)COVER: Non-ferrous plated material. Covers stock hollow metal doors with 161 cutout.MOUNTING: Furnished with wood and machine screws.END CAP: Brass, bronze or stainless steel construction.ALARM: Available by special order.HAND: Non handed, center hub for 2-3/4" backset.LATCHBOLT: Stainless steel 3/4" throw with anti-pick feature.SPRING: Stainless steel throughout.ANSI STANDARD: A156.3, Grade 1.RAIL ASSEMBLY: Heavy gauge extruded aluminum body with stainless steel push pad.STRIKE: 938 packed standard.DOGGING FEATURE: Allen-type key furnished.MULLION: Special order.DOOR SIZE: 7700EO36 for 36" doors. (30" to 36” door width). Actual length: 32”, max cutdown: 6”CENTER CASE: 8-1/16" x 2-3/4" x 2-1/2"

7760V 3684—Same as above unless listed below.FOR DOORS: For 1-3/4" door thickness. 3-3/4" minimum stile width required for singledoor application. 3-1/2" minimum stile width for double door applications.ALARM: Available by special order.HAND: Easily field reversible. Specify LHRB or RHRB for convenience.LATCHBOLT, SPRING: Stainless steel.DOOR SIZE: 7760V 3684 for 36" x 84" doors (30" to 36” doors). Actual length: 32”, maxcut down: 6”STRIKES: 221 & 227 packed standard.TOP AND BOTTOM RODS: Top rod 37-1/2", bottom rod 35-5/8”.VERTICAL RODS: 1/2" round tubing.TOP AND BOTTOM CASES: 3-15/16" x 2-1/8" x 1-3/8".

Fits same hole pattern as Von Duprin 99 & 98

7700EO 3 or 32D Exit Only7760V 3684 3 or 32D Vertical-Exit Only

With ClutchATENT00L 26D Entrance3-1/2" rose diameter

With ClutchSPAENT00L 26D Entrance3-1/2" rose diameter

With ClutchTUBENT00L 26D Entrance3-1/2" rose diameter

ESC7700 3ESC7700 26DENTRANCE-Rigid entrance,key locks and unlocksescutcheon trim. ANSIfunction 63. Operates asclassroom function. 6 pin solidbrass “C” keyway mortisecylinder standard.

77TP00 377TP00 32DENTRANCE-Key locks andunlocks thumbpiece.(Operates as classroomfunction). ANSI function 63.Works on both rim and verticalrod devices.

7700NL 37700NL 32DFOR RIM DEVICES ONLY-Outside by pull and key. Keyretracts latch bolt. ANSIfunction 03. Covers 161cutout. 6 pin solid brass “C”keyway rim cylinder standard.

7700DTP 37700DTP 32DOUTSIDE PULL ONLY-Outside by pull only. Pull whendogged. ANSI function 02.Covers 161 cutout.

OTHER KEYWAYS AVAILABLE - CALL WITH YOUR NEEDS

More trims on next page.

v4

Meets theBuy American Act

Overlapping Strike

951 STRIKEUsed on inactive leaf fordevice on active leaf of pair ofdoors without a mullion

With Clutch Function FinishENT00L Entrance-C keyway 3, 26DICENT00L Entrance-for small format I/C 26DICSCENT00L Entrance-for full size I/C 26DPAS30L Passage 3, 26DSTR05L Storeroom-C keyway 26DICSTR05L Storeroom-for small format I/C 26DICSCSTR05L Storeroom-for full size I/C 26D(I/C) Less Interchangeable core, order separately.

Entrance8000K 38000K 32D

"C" Keyway3-1/2" rose

TO ORDER, SPECIFY:Stock No. and Finish

233 STRIKE-Vertical rod bottomstrike see page 141.

For Narrow Stile/Aluminum Glass Doors see page 137

CAL-ROYAL

139(PL-4)

®ZIPF LOCK COMPANY


Rim Type Push Bar Exit DeviceANSI A156.3 Grade 2, UL ListedLifetime Warranty

THP4400 EntranceTHP4430 Passage26D, DURO

3-1/2" x 16"

ESC-4400 EntranceECS-4430 Passage26D

2-3/4" x 8-1/2"

4400EO—FOR DOORS: 1-3/4" thick standard. 4-1/2" minimum stile width required forsingle or double door applications.CHASSIS: Non-ferrous alloy. (Panic Grade)COVER: Non-ferrous alloy. Covers stock hollow metal doors with 161 cutout.MOUNTING: Furnished standard with wood and machine screws.HAND: Non handed, center hub for 2-3/4" or 2-3/8" backset.LATCH BOLT: 3/4" throw.SPRING: Stainless steel.ANSI STANDARD: A156.3, Grade 2.CROSSBAR: 1" aluminum, 0.062" thick for 36" wide doors.STRIKE: Roller type.DOGGING KEY: Allen-type key furnished standard.MULLION: Available by special order.UL AND ULC LISTED: 4400 Series for panic.FINISHES: 26D-Satin Chrome, DURO-Dark bronze duranodic.DOOR SIZE: For 36" wide doors. For 48" doors special order only.

Dimensions: Center of case to finished floor: 41". Cross bar projection-neutral: 4-3/4", depressed: 3". Device length: Short 3'. 1' to 3' door size.




Rim Type Push Bar Exit DeviceANSI 156.3 Grade 1, UL LIstedLifetime Warranty

CRCODE007 26D (Specify LH or RH)Features:• Dual mode for code free entry either mechanically by key or

thru the keypad.• Can store up to 90 different numeric user codes in 4, 5 or 6

digits.• Settings remain in memory when batteries are removed.• Audible alarm sounds after 3 incorrect attempts.• Connections available for remote release switch and lock

activation when linked to fire alarm system.• Can be used as STOREROOM or CLASSROOM function.

Factory default set as STOREROOM.• Fast and easy programming via master code.

HEAVY DUTY KEYLESS DIGITAL LOCK HEAVY DUTY MECHANICALKEYLESS DIGITAL LOCK

Additional Trims for 7700 Series

v4

4400EO 36" Exit Only26D, DURO

48" available by special order.

LifetimeWarranty


Act

MECHANICAL PUSH BUTTON TRIMWITHBREAKAWAYLEVERFEATURE


for 2200, 9800 and 7700 devices.• Easy installation covers 161 prep.• *1 - 12 digit length codes (see below).• Single code user.• Key override.• Easy on-door code change.• Default function: Storeroom• Code-free option (passage).• Breakaway lever design.• Weather resistant.• Non-handed.• More than 8000 non-sequential code

combinations.

Works with:2200, 9800 and7700 devices

Works with:9800 and 7700devices

Works with:9800 and 7700devices

CRCODE-101 26DSpecify hand: LH or RHFeatures:• Single code up to 8000 code combinations.• Weather-resistant finish.• Code can be changed anytime without

dismounting.• Full size, non-handed lever handle.• Easy installation. Reversible handing.

*NOTE FOR CRCODE-204: An entry code can be a combination of 1 to 12 digits long. The digits can be entered in any order. For example,if the chosen 6-digit code is "5283XZ" it can be opened as "ZX3825" or "3X8Z25" or in any other combination of the 6-digit code.

CAL-ROYAL

140(PL-4)

®ZIPF LOCK COMPANY

With ClutchENT00L 26D Entrance3-1/2" rose diameter


Rim Type Exit DeviceANSI A156.3 Grade 1, UL & ULC ListedLifetime Warranty. BHMA Certified.

ALARM EXIT HARDWARE—Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible meansof signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff ormanual reset. Preset at the factory for 2 minute alarm cutoff. The key switch to turn the alarm off is a standard1-1/4" cylinder with "C" keyway. The alarm operates on one standard 9 volt transistor battery. When batteryis weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors thepush rail. Unit includes "EMERGENCY EXIT ONLY ALARM WILL SOUND" decals for application on door orunit.

NALRM9800EO 36" Exit Only w/AlarmUS-3, 10B, 32D

98TP00 Entrance98TP05 Storeroom

3, 10B, 32D

9800NL10B, 32D

9800DTP32D

9800EO 36" Exit Only9860V 3684 Vertical-Exit Only

US-3, 10B, 32D



2-5/8" x 15"





Act

Rigid (Non Clutch)NESC9800 EntranceNESC9805 Storeroom

Rigid - Interchangeable CoreICNESC9800 EntranceICNESC9805 StoreroomLess core, order separately.

US-26D

Rigid (Non Clutch)NESC9830 Passage

See page 139 for details

227 Strike

221 Strike 239 Strike

FOR ITEMS NOTSHOWN - CALL

With Clutch Function FinishesENT00L Entrance-C keyway 3, 10B, 26DICENT00L Entrance-for small format I/C 26DICSCENT00L Entrance-for full size I/C 26DPAS30L Passage 3, 10B, 26DSTR05L Storeroom-C keyway 26DICSTR05L Storeroom-for small format I/C 26DICSCSTR05L Storeroom-for full size I/C 26D(I/C) Less interchangeable core, order separately.

9800EO—Rail assemblies and end caps are brass, bronze or stainless steel andrail travels in direction of the door swing.Trims are thru bolted for additional security.Chassis mounted unit construction. Rim and vertical rod devices arenonhanded and easily reversible.Lever and escutcheon trims are grade 1 construction with clutchon rose trims. Rose and escutcheon covers 161 cut out.

SPECIFICATIONS—FOR DOORS: For 1-3/4" door thickness. 4-1/2" minimum stile widthrequired for single or double door applications using standard 239strike and pull or lever, thumbpiece and escutcheon trims.BACKSET: 2-3/4"CHASSIS: Nonferrous alloy.COVER: Brass, bronze or stainless steel. Covers stock hollowmetal doors with 161 cutout.MOUNTING: Furnished with wood and machine screws.END CAP: Brass, bronze or stainless steel construction.ALARM: Available.HAND: Non handed, center hub.LATCHBOLT: Stainless steel 3/4" throw.SPRING: Stainless steel throughout.ANSI STANDARD: A156.3, Grade 1.RAIL ASSEMBLY: Heavy gauge brass, bronzeor stainless.STRIKE: 239 packed standard.DOGGING FEATURE: Allen-type key furnishedstandard.MULLION: Special order.DOOR SIZE: 9800EO36 (32") for 36" doors. (2'2" to 3' doors)CENTER CASE: 8-1/2" x 2-1/2" x 2"

9860V 3684—Same as above unless listed below.FOR DOORS: For 1-3/4" door thickness. 3-3/4"minimum stile widthrequired for single door applications. 3-1/2" minimum stile width fordouble door applications.ALARM: Available by special order.HAND: Handed. Easily field reversible. Specify LHRB or RHRBfor convenience.LATCHBOLT, SPRING: Stainless steel.DOOR SIZE: 9860V 3684 for 36" x 84" doors. (2'2" to 3' doors)STRIKES: 221 & 227 packed standard.TOP AND BOTTOM RODS: Top rod 37-1/2", bottom rod 35-5/8".VERTICAL RODS: 1/2" round tubing.TOP AND BOTTOM CASES: 3-15/16" x 2-1/8" x 1-3/8".

HEAVY DUTY KEYLESSDIGITAL LOCK

CRCODE-007

CRCODE-204 (not pictured)

HEAVY DUTYMECHANICALDIGITAL LOCKCRCODE-101

9800 Strike9860V Strikes

v1 Overlapping strike, bottom vertical rod strikeand Comparison chart found on page 141.

Finishes:US-3 Bright Brass US-26D Satin ChromeUS-10B Oil Rubbed Bronze US-32D Stainless Steel

CAL-ROYAL

141(PL-4)

®ZIPF LOCK COMPANY


Rim Type Exit DeviceANSI A156.3 Grade 2, UL ListedLifetime Warranty

5000EOSPECIFICATIONS—n FOR DOORS: 1-3/4" thick standard. 4-1/2" minimum stile width

required for single or double door application using standard 239strike and pull or lever trims.

n CHASSIS: Steel.n COVER: Covers stock hollow metal doors with 161 cutout.n MOUNTING: Furnished standard with wood & machine screws.

Thru bolts are standard packaging on fire rated devices.n END CAP: Steel construction.n HAND: Non handed, center hub.n LATCH BOLTS: Stainless steel 3/4" throw.n SPRING: Steel throughout.n ANSI STANDARD: A156.3, Grade 2.n RAIL ASSEMBLY: Heavy gauge steel, painted.n STRIKE: 239 strike standard. Shown at right.n DOGGING: Allen-type key furnished standard on the non-fire-

labeled devices.n U.L. LISTED: 5000 Series for panic.n PROJECTION: Neutral: 2-1/2", depressed 1-3/4".n BACKSET: 2-3/4".n DOOR WIDTH: For doors 2' 2" to 3' 0" wide.n MOUNTING HEIGHT: 41" at center.n CYLINDER: Schlage "C" keyway.n OPERATION: Inside by slight pressure on any point on the push

bar at all times.n DOOR SIZE: For 36" door.

5000V Same as above unless listed belowSPECIFICATIONS—n FOR DOORS: 1-3/4" thick standard. 3-3/4" minimum stile width

required for single door applications. 3-1/2" for double doors.n HAND: Easily field reversible. Specify LHRB or RHRB for

convenience.n STRIKE: 221 and 227 strikes standard, at right.n LATCH BOLT, SPRING: Stainless steel.n PROJECTION: Neutral: 2-1/2", depressed 1-3/4".n DOOR WIDTH: For doors 2' 2" to 3' 0" wide.n MOUNTING HEIGHT: 41" at center.n TOP & BOTTOM ROD LENGTH: Top: 43-1/4", Bottom: 37-3/4".n VERTICAL ROD: 1/2" round tubing.n DOOR SIZE: For 36" x 84" doors.

239Strike

5000V 3684 ALUM5000V 3684 32D

Entrance "C" Keyway8000L (pictured)CLU5000L*US3, 10B, 26D

5000 DTP 26D3" x 7-3/4"

Entrance8000K 32D"C" Keyway3-1/2" rose

5000 NL 26D"C" Keyway

3" x 7-3/4"

221 Strike

5000EO 36" ALUM Exit Only5000EO 36" 32D Exit OnlyF5000EO 36" ALUM Fire Rated (3 hours)-Exit Only

*Picture is similar for CLU5000L but has a clutch andRose dia. is 3-1/2".

227 Strike


Finishes:US-3 Bright BrassUS-10B Oil Rubbed BronzeUS-26D Satin ChromeUS-32D Stainless Steel


8000 DTP3, 10B, 26D3" x 7-3/4"

8000 NL US-3"C" Keyway

3" x 7-3/4"

Limited supplyavailable at areduced price.

Overlapping Strike for9800, 2200 Series Devices

LifetimeWarranty

254 STRIKEUsed on inactive leaf for device on activeleaf of pair of doors without mullion

Overlapping Strike for5000 Series Device

251 STRIKEUsed on inactive leaf for device onactive leaf of pair of doors withoutmullion

Bottom Strike for 7700, 9800,5000, 2200 Series V.R. Devices

233 STRIKEFor vertical rod devices. Flush mount-ing stainless steel. Furnished with ex-pansion shields. Requires mortised.

v1

CAL-ROYAL

142(PL-4)

®ZIPF LOCK COMPANY

2-5/8" x 15"THP00 EntranceTHP05 StoreroomTHP30 PassageTHP40 DummyALUM, DURO, GOLD

2200NL*3" x 7-3/4"

2200DTP*3" x 7-3/4"

8000K 10B, 32DC Keyway, 3-1/2" rose

Entrance w/ClutchESC2200 ALUMC Keyway

ICESC2200 ALUMLess small format core,order separately


FOR ITEMS NOTSHOWN - CALL

* ALUMDUROGOLD

- See next page for more 2200 exit device trims -

2200EO—Chassis mounted unit construction.Lever and escutcheon trims are grade 1 construction with clutchfreewheeling mechanism. Rose and escutcheon covers 161 cut out.

SPECIFICATIONS—FOR DOORS: For 1-3/4" door thickness. 4-1/2"minimum stile widthrequired for single or double door applications using standard 239strike and pull or lever trims.CHASSIS: Nonferrous alloy.COVER: Nonferrous alloy. Covers stock hollow metaldoors with 161 cutout.MOUNTING: Furnished with wood and machine screws.END CAP: Steel construction.ALARM: Available.HAND: Non handed, center hub.LATCHBOLT: Stainless steel 3/4" throw.SPRING: Stainless steel throughout.ANSI STANDARD: A156.3, Grade 1.RAIL ASSEMBLY: Heavy gauge steel, painted.STRIKE: 239 packed standard.DOGGING FEATURE: Allen-type key furnished.MULLION: Special order.DOOR SIZE: 2200EO36 for 36" doors. (2'2" to 3' doors)CENTER CASE: 5-1/8" x 2-3/4" x 2"'

2260V 3684—Same as above unless listed below.FOR DOORS: For 1-3/4" door thickness. 3-3/4"minimum stile widthrequired for single door applications. 3-1/2" minimum stile width fordouble door applications.ALARM: Available by special order.HAND: Easily field reversible. Specify LHRB orRHRB for convenience.LATCHBOLT, SPRING: Stainless steel.DOOR SIZE: 2260V 3684 for 36" x 84" doors. (2'2" to 3' doors)STRIKES: 221 & 227 packed standard.TOP AND BOTTOM RODS: Top rod 43-1/4",bottom rod 37-3/4".VERTICAL RODS: 1/2" round tubing.TOP AND BOTTOM CASES: 3-15/16" x 2-1/8" x 1-3/8".

Exit Only Exit Only-Fire Rated2200EO 24" ALUM F2200EO 24" (Special Order)2200EO 32" ALUM F2200EO 32" (Special Order)2200EO 36" ALUM, DURO, GOLD F2200EO 36" ALUM, DURO2200EO 48" ALUM F2200EO 48" (Special Order)Vertical-Exit Only Vertical-Exit Only2260V 3684 ALUM, DURO, GOLD Special order


Rim Type Exit DeviceANSI A156.3 Grade 1, UL & ULC ListedLifetime Warranty. BHMA Certified.

227 Strike

221 Strike

ALARM EXIT HARDWARE—Alarm units has an internal horn. When the push rail is depressed, the horn sounds to providean audible means of signaling that the door has been opened and violated. The unit haschangeable 2 minute alarm cutoff or manual reset. Preset at the factory for 2 minute alarmcutoff. Jumper cable is provided to switch to continuous alarm. The key switch to turn thealarm off is a standard 1-1/4" cylinder with "C" keyway. The alarm operates on one standard9 volt transistor battery. When battery is weak the horn will emit an intermittent signal.Alarmed units are supplied with two switches. One switch monitors the push rail and the otherswitch monitors the latchbolt for full proof security.Unit includes "EMERGENCY EXIT ONLY ALARM WILL SOUND" decals for application ondoor or unit.Finishes: ALUM Aluminum US3 Polished Brass

DURO Duronodic 10B Oil Rubbed BronzeGOLD Gold 26D Satin Chrome

32D Stainless steel

OverlappingStrike

251 STRIKEUsed on inactive leaffor device on active leafof pair of doors withoutmullion


Act

Bottom Strike for 7700, 9800,5000, 2200 Series V.R. Devices

233 STRIKEFor vertical rod devices. Flush mount-ing stainless steel. Furnished with ex-pansion shields. Requires mortised.

239 Strike

ALRM2200EO 36" ALUM, DURA, GOLDExit Only w/Alarm

(See description at bottom of this page)

2200 Strike2260V Strikes

v1

CAL-ROYAL

143(PL-4)

®ZIPF LOCK COMPANY

ARCHITECTURAL HINGES

1/4" Radius Corner—No. Size GaugeRH61 3-1/2" x 3-1/2" .085Finishes: US-3, 4, 5, 10B, 15, 15A, 26, 26D

RH61B* 3-1/2" x 3-1/2" .085*Bulk Assembled (100 per box)Finishes: US-4

RH60 4" x 4" .097Finishes: US-5

5/8" Radius Corner—No. Size GaugeRH35 3-1/2" x 3-1/2" .085Finishes: US-3, 5, 10B, 15, 15A, 26, 26D

RH35B* 3-1/2" x 3-1/2" .085*Bulk Assembled (100 per box)Finishes: US-4

UARH35* 3-1/2" x 3-1/2" .085*Bulk Unassembled (100 per box)Finishes: US-4

RH40 4" x 4" .097Finishes: US-10B, 15, 15A, 26, 26D

Square Corner—No. Size GaugeRH33 3" x 3" .085RH90 3-1/2" x 3-1/2" .085RH91 4" x 4" .097Finish: US-4

Residential Weight HingesPlain Bearing 5 KnucklesNon-template type 2 hinges per box

Finishes:US3 Bright BrassUS4 Satin Brass5 Antique Brass10B Oil Rubbed Bronze

15 Satin Nickel15A Antique Nickel26 Bright Chrome26D Satin Chrome

Plain Bearing Standard Weight—For standard weightdoors receiving low frequency service. Template hingesare furnished with all machine and all wood screws.

Ball Bearing Standard Weight—For standard weightdoors receiving average` frequency service. Templatehinges are furnished with all machine and all woodscrews.

MECHANICAL PUSH BUTTON TRIMWITHBREAKAWAYLEVERFEATURE


for 2200, 9800 and 7700 devices.• Easy installation covers 161 prep.• *1 - 12 digit length codes (see below).• Single code user.• Key override.• Easy on-door code change.• Default function: Storeroom• Code-free option (passage).• Breakaway lever design.• Weather resistant.• Non-handed.• More than 8000 non-sequential code

combinations.

Works with:2200, 9800 and7700 devices

2200 SERIES EXIT DEVICESTRIMS (Continued)




With Clutch Function FinishesENT00L Entrance-C keyway 3, 10B, 26DICENT00L Entrance-for small format I/C 26DICSCENT00L Entrance-for full size I/C 26DPAS30L Passage 10B, 26DSTR05L Storeroom-C keyway 26DICSTR05L Storeroom-for small format I/C 26DICSCSTR05L Storeroom-for full size I/C 26D(I/C) Less interchangeable core, order separately.

3-1/2" rosediameter


- More 2200 exit device trims on previous page -


v3

*NOTE FOR CRCODE-204: An entry code can be a combination of 1 to 12 digits long. The digits can be entered in any order. For example,if the chosen 6-digit code is "5283XZ" it can be opened as "ZX3825" or "3X8Z25" or in any other combination of the 6-digit code.

Please call us if you do notsee the hinge you need.

CAL-ROYAL

144(PL-4)

®ZIPF LOCK COMPANY

BUILDERS' HARDWARE

ASA Strikes

CR-ASA478US3, 10, 10B, 26, 32D

ASA Strike

CR-ASASTUS3, 26DSteel ASA

Ball Catches

CR-BC97US3, 5, 10B, 15A

Adjustable Ball Catch(2-1/4" x 1") w/full

lip round corner strikeplate (w/screws)

Ball Catches

CR-DIB1US3, 5, 10B, 15, 15A, 26, 26D

Adjustable Drive in Ball Catch w/fulllip round corner strike plate.

(w/screws)

$CR-NBC110US3, 5

Ball Catch(5/8"D x 3/4"W x 2-1/4"L).

For doors 1-3/8" thickNon adjustable. (w/screws)

DiscontinuedCall for price

Bumpers

CR-CONWB42US3, 32D

Convex Wall Stop2-1/2" Diameter

Projection: 1-3/16",Toggler & RP.

CR-SWBUS3, 15, 15A,10B, 26,

26DSolid Brass Wall

Convex Stop.1" diameter, 1/2"

projection (Ives #404)

CR-WB26US3, 10, 10B, 15A,

26, 32DConcave Wall Stop.

2-1/2" diameter.Projection: 1-3/16"

Toggler & RPCrash Chain

CR-HDCDV48 26DAdjustable Chain DoorStop (20" to 30-1/2")

(Ives #115)

Door GuardsDoor Chains

CR-DG22US3

Solid BrassChain Door Guard

6-3/4" Chain

CR-BBDHG88US3, 5, 26D

Zinc Diecast Swing BarDoor Guard with

ball bearing

SUPER SPECIAL PRICING AVAILABLE ON ITEMS MARKED WITH - SUPPLIES LIMITED - PLEASE INQUIRE.See page 143 for finish descriptions

Standard Weight HingesTwo Ball Bearing Full Mortise TypeTemplate type 2 or 3 hinges per box

No. Size GaugeBBSC77 3-1/2" x 3-1/2" .123Finishes: US-4, 26D

BBSC56 4" x 4" .130Finishes: US-3, 4, 15, 15A, 26, 26D

BB31 4-1/2" x 4-1/2" .134Finishes: US-3, 4, 10A, 15, 15A, 26, 26D,

USP

BB31NPR* 4-1/2" x 4-1/2" .134Finishes: US-26D*NPR-Non Removeable Pin

Standard Weight HingesPlain Bearing Full Mortise TypeTemplate type 2 or 3 hinges per box

No. Size GaugeTBHSC77 3-1/2" x 3-1/2" .123Finishes: US-3, 4, 15, 15A, 26, 26D

TBHSC55 4" x 4" .130Finishes: US-3, 4, 15, 15A, 26, 26D

TBH30 4-1/2" x 4-1/2" .134Finishes: US-10A, 15, 15A, 26, 26D,

USP

Spring Hinges (Commercial)Single Acting Full Mortise TypeTemplate type 2 or 3 hinges per box

No. Size GaugeSH140 4-1/2" x 4-1/2" .134Finishes: US-10A, 26, 26D, USP

See previous pagefor finishes.

v3

CAL-ROYAL

145(PL-4)

®ZIPF LOCK COMPANY

BUILDERS' HARDWAREDoor Guards

CR-LPG2ALUM, DURO,Latch Guard2-7/8" x 11"

Door Stops

*w/hanger bolt & wood screw; stud w/expansion shield; Machine Screw & anchorCR-DSHP18

US-3, 5, 10B, 15,15A, 26, 26D

Solid Brass DomeStop, High Profile.

1-3/4" diameter, 1/2"thick base.

CR-DSLP4US10B, 15A, 26, 26D

Solid Brass DomeStop, Low Profile.

1-3/4" diameter, 1/8"thick base.

CR-GS119*US3, 4, 10, 10B,

15, 15ADoor Stop2-7/8" high

CR-DH25US3, 26D

4" Zinc Diecast DropDown Door Holder

CR-SBDH5US3, 10, 10B

5" Solid Brass KickDown Door Holder.Base 7/8" x 1-3/4"

(Ives #455)

CR-JHP11US-3, 5, 10B, 15, 15A, 26

Jumbo Hinge Pin Door Stopw/nylon bushing.

CR-HP95US-3, 5, 15, 15A, 26

Hinge Pin Stop w/nylonbushing.

CR-DSLD81US-3, 5, 10B, 15, 26D

Residential (light duty) Hinge Pin Stopw/nylon bushing.

CR-DSHD105US-3, 5, 10B, 15, 15A

Commercial (heavy duty) Hinge PinStop w/nylon bushing.

CR-FS89US3, 5, 15, 15A

3" Flexible Door Stop withfixed screw. Die cast base,

One piece style.

CR-RS92US3, 5, 10B, 15, 15A, 26,

26D3" Cast Rigid Door Stop

w/molded screw

CR-HDFS3US3, 5, 10B, 15, 15A, 26

3-1/8" Heavy Duty Flexible DoorStop with screw and metal base

CR-SOFS3US3, 5, 10B, 15, 15A

3" Heavy Duty FlexibleSnap on Door Stop-3 pcs

(Ives #060)

CR-SBRS3US3, 10B, 15, 15A, 26

3" Solid Brass RigidDoor Stop(Ives #64)

Door Viewers

160O Door Viewer1/2" Bore

CR-DV90 (plastic lens)US3, 15

Door Viewer9/16" Bore

CR-DV180 180O (plastic lens)US3, 5, 10B, 15, 26

CR-ULDV200* 200O (glass lens)US3, 10A, 10B, 15, 26, 26D

*UL Listed

Edge Pull

CR-EP23US3

Edge Pull, FlushMount, Size 3"

CR-DIFP218US3, 5, 15, 15A, 26, 26D

Drive inFinger Pull2-1/8" Dia.No nails

Finger Pull

CR-COV200 CR-COV160

CR-COV160US-3, 10B, 15, 26D - For DV90, ULDV160

CR-COV200US-3, 10B, 15, 26D - For DV180, ULDV200

Door ViewersCover Plates

Hand Rail Bracket

CR-HDHB40US-3, 5, 10B, 15, 15A, 26D

Heavy Duty Hand Rail Bracket(2-1/4" H x 1-3/8"W)

(Ives #059)

See page 143 for finish descriptionsSUPER SPECIAL PRICING AVAILABLE ON ITEMS MARKED WITH - SUPPLIES LIMITED - PLEASE INQUIRE.

See page 432for Digital Door

Viewer

CR-GS118*US3, 4, 10, 10B, 15A

Door Stop2-1/8" high

v3

CAL-ROYAL

146(PL-4)

®ZIPF LOCK COMPANY

BUILDERS' HARDWARE

Flush Bolts

CR-ULFB63426D

UL Listed Solid Brass LeverExtension Flush Bolt

1" x 6-3/4"12" extension

CR-MB86S15, 15A, 26D

6" Brass Flush Bolt1" throw

Surface Bolts

FINISHES:US3 Bright BrassUS4 Satin BrassUS5 Antique BrassUS10 Satin BronzeUS10B Oil Rubbed BronzeUS15 Satin NickelUS15A Antique NickelUS19 Flat Black CoatedUS26 Bright ChromeUS26D Satin ChromeUS32D Stainless SteelUSP Prime Coat, GreyALUM AluminumDURO DuronodicGOLD Gold

SLIDING DOOR LOCKS

For Pocket Doors*Adjustable for 1-3/8" to 1-3/4"door thickness.Fully reversible.Simple to install.Individually polybagged & boxed.

*Privacy for 1-3/4" requires Rocker Pin-SPECIFY

Stock No. Description FinishesSDL-16- Privacy Lock US3, 5, 10B, 15, 15A, 19, 26, 26DSDL-17- Passage Lock US3, 5, 10B, 15, 15A, 19, 26, 26D•Privacy has emergency release.

Pull Plates

3-1/2" x 15"..050 thickness.

6" solid brass handlew/fastners and

washers.

CR-PULPL3515US3, 5, 10B, 32D

6" Brass Flush Bolt1" throw

KEYWAY CODES: Finishes:RB-Russwin D1 (1011D1) 04, 26DSC-Schlage C (1145) 04, 26DSE-Schlage E (1145E) 04, 26DSF-Schlage F (1145F) 04, 26DSX-Schlage C/K 04, 26DUE-Lori (Kaba) 80 5 pin only 26DWA-Weiser 1555* 04, 26DXE-Dexter 67 04, 26DYA-Yale 8 04, 26DYG-Yale GA 04, 26D

KEYWAY CODES: Finishes:AA-Arrow (1179) 26DCA-Corbin 60 (1001EH) 04, 26DCD-Corbin 59A1-A2 04, 26DCE-Corbin Russwin L4 04, 26DGA-Sargent LA (1007LA) 04, 26DGB-Sargent LA-LC 04, 26DGC-Sargent RA-RC 04, 26DKS-Kwikset (1176) 04, 26DLA-Lockwood 1004 26DNB-Composite (HR1) 04, 26DRA-Russwin 5981R (N1011P) 04, 26DKeyway availability subject to change.

The Ilco 15995 Knob/Levercylinder can be used in mostCal Royal knob & lever locks.Just let us know what keywayyou require when ordering andwe can take it from there.

15995

SUPER SPECIAL PRICING AVAILABLE ON ITEMS MARKED WITH - SUPPLIES LIMITED - PLEASE INQUIRE.

CR-ESSBUL-50US26D

UL Listed 8" HeavyDuty Surface Bolt.

(Ives #453)Bolt Throw: 1-3/16"Width: 1"Projection: 1-5/8"

CR-DSW85Rubber Door Silencer.3/8" x 3/4" Base, 3/4"

length. For woodframes

(Sold in multplies of 25)

CR-DSM21Rubber Door Silencer.

1/2" Dia. 11/16"Length. For metal

frames(Sold in multplies of 25)

Silencers, Door

v3

CAL-ROYAL

147(PL-4)

®ZIPF LOCK COMPANY

HIGH SECURITY KEY SYSTEMS - With Open Profile"A" KeywayThe CRP Securities High Security Key (HSK) System utilizes the innovative Sidebar technology to bring you superior andmanageable Key Control. Together with distinct keyways and controlled means of key blank distribution, the Sidebar offers asuperior level of Key Control Management. Keys can be cut on any standard duplicating and code cutting machines. All cylinderscan be master keyed (MK), keyed-alike (KA) and keyed-different (KD).The HSK System is designed for use in institutions, schools, hospitals, banks and all commercial and residential applications.The Sidebar series keyway is a proprietary design that is distributed in a controlled manner. Cal-Royal offers a cost-effectivelevel of security comparable to other expensive high security control systems.Maximum pick resistance is assured in HSK Systems with the utilization of anti-picking side pins and random mushroom toppins secured by cap screws. Standard cylinders are equipped with 2 or 3 hardened steel pins in the cylinder plug face for theultimate in drill resistance. This protects the top and bottom pins and the sidebar from drilling attack. We stock the open profile"A" keyway cylinders with the sidebar feature.

Key-in-Knob-Lever Cylinder Features:• ANSI/BHMA A156.30 Certified.• Retrofits all CRP-Securities cylindrical locksets and

deadbolts including other popular brand names.• Unique floating side bar pins.• Patented Cylinder plug and Key.• Open Profile Keyway.• Pick-Resistant Spool Pins.• Hardened Silver Nickel Side Bar.• 0-Bitted. Two key blanks included.• Two Anti-Drill Hardened Steel Pins• Comes standard with different tailpieces

(shown above) for universal applicationand 2 key blanks.

11- Cap Set Screw12- Screw Cap Spring13- Screw Cap Pin14- Tailpiece15- Washer16- Screw Cap

1- Key2- Plug3- Anti-Drill Pin4- Bottom Pin5- Side Bar Spring6- Side Bar7- Side Pin8- Cylinder Housing9- Top Pin

10- Top Pin Spring

*Mortise-Rim Combo Cylinder Features:• ANSI/BHMA A156.30 Certified.• 1-1/8" cylinder has Mortise and Rim combination kit that

saves stocking space and inventory.• Cylinder rings available for 1" cylinder requirements

using MRCC114 or MRC118.• Unique floating side bar pins.• Patented Cylinder and Key.• Pick-Resistant Spool Pins.• Three Anti-Drill Hardened Steel Pins.• Hardened Silver Nickel Side Bar.• Open Profile Keyway.

See above for Nos. 1 thru 1526- Cam27- Cam Screw28- Plate29- Steel Ball30- Bolt31- Screw

Any Pinning kit and/or pins used to key Schlage can be used for keying the above cylinders

Key-in-Knob/Lever CylindersStock No. DescriptionHSK-KIKL6 26D 0B Universal 6-pin restricted w/sidebar

HSK-CAMADAM-1Adams Rite Cam (#1)

*Mortise-Rim Combo Cylinders-Stock No. DescriptionHSK-MRC114 26D 0B 6-pin, 1-1/4" restricted w/sidebar w/o rim kitHSK-MRC118 26D 0B 6-pin, 1-1/8" restricted w/sidebar w/rim kit*

*Cylinder is shipped as a mortise cylinder but is convertible to a RIM cylinder with the standard RIM pack included on select mortise cylinders. An "AdamsRite" cam is pre-installed on all mortise cylinders.

v3

Rim kit only availablewith 1-1/8 cylinder.

HSK-KBL-6A 6-pin w/sidebar

High Security Key Blank -

HSK-CAMYALE-2AYale Cam (#2A)

Mortise Cylinder Cams -

CAL-ROYAL - Zipf Lockstore.zipflock.com/zipflockco.com/HDCAT/Cal-Royal.pdf · CAL-ROYAL 116 (PL-4)...

Documents

Transcript of CAL-ROYAL - Zipf Lockstore.zipflock.com/zipflockco.com/HDCAT/Cal-Royal.pdf · CAL-ROYAL 116 (PL-4)...