CADD 1 Midterm Exam STUDY GUIDE 60 · PDF fileCADD 1 Midterm Exam STUDY GUIDE 60 questions ......

22
Name: ________________________ Class: ___________________ Date: __________ ID: A 1 CADD 1 Midterm Exam STUDY GUIDE 60 questions Multiple Choice Identify the choice that best completes the statement or answers the question. ____ 1. Producing computer generated drawings is called a. CAD c. CIM b. CAM d. GPS ____ 2. The AutoCAD command to draw rounded corners is: a. Ortho c. Array b. Fillet d. Chamfer ____ 3. The AutoCAD command to make single and multiple copies is: a. Copy c. Mirror b. Array d. Grid ____ 4. The AutoCAD command to draw half an object and duplicate the other half is: a. Copy c. Mirror b. Array d. Grid ____ 5. The AutoCAD command to edit the length of objects is: a. Array c. Chamfer b. Trim d. Ortho ____ 6. The AutoCAD command to create arrangements of objects is: a. Array c. Chamfer b. Trim d. Ortho ____ 7. The AutoCAD command to constrain points to be only horizontal or vertical is: a. Array c. Chamfer b. Trim d. Ortho ____ 8. The AutoCAD command to remove portions of lines, circles and arcs is: a. Array c. Chamfer b. Break d. Ortho ____ 9. Fig 2012.1 The Red “A” in Fig 2012.1 is the ________________ at the top of the main window which contains commonly used file operations. a. Quick Access Toolbar c. Graphics Window b. Application Menu d. Scarlet letter

Transcript of CADD 1 Midterm Exam STUDY GUIDE 60 · PDF fileCADD 1 Midterm Exam STUDY GUIDE 60 questions ......


Name: ________________________ Class: ___________________ Date: __________ ID: A

1

CADD 1 Midterm Exam STUDY GUIDE 60 questions

Multiple Choice

Identify the choice that best completes the statement or answers the question.

____ 1. Producing computer generated drawings is called

a. CAD c. CIM

b. CAM d. GPS

____ 2.

The AutoCAD command to draw rounded corners is:

a. Ortho c. Array

b. Fillet d. Chamfer

____ 3. The AutoCAD command to make single and multiple copies is:

a. Copy c. Mirror

b. Array d. Grid

____ 4. The AutoCAD command to draw half an object and duplicate the other half is:

a. Copy c. Mirror

b. Array d. Grid

____ 5. The AutoCAD command to edit the length of objects is:

a. Array c. Chamfer

b. Trim d. Ortho

____ 6. The AutoCAD command to create arrangements of objects is:

a. Array c. Chamfer

b. Trim d. Ortho

____ 7. The AutoCAD command to constrain points to be only horizontal or vertical is:

a. Array c. Chamfer

b. Trim d. Ortho

____ 8. The AutoCAD command to remove portions of lines, circles and arcs is:

a. Array c. Chamfer

b. Break d. Ortho

____ 9.

Fig 2012.1

The Red “A” in Fig 2012.1 is the ________________ at the top of the main window which contains

commonly used file operations.

a. Quick Access Toolbar c. Graphics Window

b. Application Menu d. Scarlet letter


Name: ________________________ ID: A

2

____ 10.

Fig 2012.2

Fig 2012.2 is the ________________ located at the bottom section of the screen layout that provides status

information for an operation and it is also the area for data input.

a. Quick Access Toolbar c. Command Prompt Area

b. Application Menu d. Graphics Window

____ 11.

Fig 2012.3

Fig 2012.3 is the ________________ top section of the screen layout that contains customizable icon panels

which allow us to quickly access the commonly used commands available in AutoCAD

a. Status Toolbar c. Command Prompt Area

b. Application Menu d. Ribbons Tabs and Panels

____ 12.

Fig 2012.4

Fig 2012.4 is the Draw and Modify toolbar panels that contain icons for ____________ draw and modify

commands.

a. draw c. properties

b. dimension d. utilities

____ 13.

Fig 2012.5

Fig 2012.5 is on the _____________________ toolbar panel used for creating and editing text.

a. Home c. Modify

b. Annotation d. Properties


Name: ________________________ ID: A

3

____ 14.

Fig 2012.6

Fig 2012.6 is the Layers Control toolbar panel which contains tools to help you to freeze and lock layers.

a. True b. False

____ 15.

Fig 2012.7

Fig 2012.7 is the line command which creates

a. polar lines c. straight line segments

b. curvy lines d. spiral lines

____ 16.

Fig 2012.8

Fig 2012.8 is the ______________icon used to make multiple copies of objects in polar or rectangular

patterns.

a. Line c. Array

b. Mirror d. Scale

____ 17.

Fig 2012.9

Fig 2012.9 is the icon used to ______________________ objects.

a. Rotate c. Trim

b. Array d. Dimension

____ 18.

Fig 2012.10

Fig 2012.10 is the icon used to ______________________ objects.

a. Rotate c. Trim

b. Mirror d. Dimension


Name: ________________________ ID: A

4

____ 19.

Fig 2012.11

Fig 2012.11 is the_________________ icon used to round objects.

a. Fillet c. Trim

b. Mirror d. Rotate

____ 20.

Fig 2012.12

Fig 2012.12 is the _________________ icon used to create a new object at a specified distance from an

existing object or through a specified point.

a. Fillet c. Offset

b. Mirror d. Rotate

____ 21.

Fig 2012.13

Fig 2012.13 is the _________________ icon used to create a new object at a specified distance from an

existing object or through a specified point.

a. Rotate c. Offset

b. Copy d. Array

____ 22.

Fig 2012.14

Fig 2012.14 is the _________________ icon remove objects on the graphics window.

a. Erase c. Offset

b. Copy d. Rotate


Name: ________________________ ID: A

5

____ 23.

Fig 2012.15

Fig 2012.15 is the _________________ icon remove objects on the graphics window.

a. Rotate c. Offset

b. Copy d. Trim

____ 24.

Fig 2012.16

Fig 2012.16 is the _________________toolbar which allows you to quickly draw placing the cursor to

points on objects.

a. Array c. Object Snap

b. Circle d. Properties

____ 25.

Fig 2012.17

Fig 2012.17 is the Quick set up dialog box for Units. Which measurement should be selected to draw using

feet and inches?

a. Decimal c. Architectural

b. Engineering d. Scientific


Name: ________________________ ID: A

6

____ 26.

Fig 2012.18

In Fig 2012.18, which is the button to select on this screen to change the page orientation for printing?

a. New c. Import

b. Modify d. Close

____ 27.

Fig 2012.19

Fig 2012.19 is the ____________ icon used to turn objects in different directions.

a. Dimension c. Offset

b. Rotate d. Circle

____ 28.

Fig 2012.20

Fig 2012.20 is the ____________ icon used to lengthen objects that it ends precisely at a selected boundary.

a. Trim c. Offset

b. Rotate d. Extend


Name: ________________________ ID: A

7

____ 29.

Fig 2012.21

Which tab should you select when you are going to print/plot in Fig 2012.21?

a. Model b. Layout1

____ 30.

Fig 2012.22

Which button in Fig 2012.22should you select when you are going to print/plot a drawing oriented 8.50 x

11.0 inches?

a. Portrait c. Plot upside-down

b. Landscape


Name: ________________________ ID: A

8

____ 31.

Fig 2012.22

Which button in Fig 2012.22should you select when you are going to print/plot a drawing oriented 11.0 x

8.50 inches?

a. Portrait c. Plot upside-down

b. Landscape

____ 32. The AutoCAD shortcut command to OFFSET an object is:

a. O c. P

b. Z d. T

____ 33. The AutoCAD shortcut command to MOVE an object is:

a. A c. F

b. M d. Q

____ 34. The AutoCAD shortcut command to draw a LINE is:

a. E c. G

b. H d. L

____ 35. The AutoCAD shortcut command to ZOOM is:

a. O c. P

b. Z d. T

____ 36. What is the diameter of a R 1 1/2 circle?

a. 1/4 c. 3

b. 3/4 d. 3 1/4


Name: ________________________ ID: A

9

____ 37. Shapes mirrored about the center line are:

a. Symmetrical c. Similar

b. Matching d. Uniform

____ 38.

Which measurement in Figure D1003.03.02 is 1 1/4?

a. A c. C

b. B d. D

____ 39.

Which measurement in Figure D1003.03.02 is 1 3/4?

a. A c. C

b. B d. D

____ 40.

Figure D1003.03.01

Identify the HIDDEN line in Figure D1003.03.01

a. A c. C

b. B d. D


Name: ________________________ ID: A

10

____ 41.

Figure 110

To get the dialog box in Figure 110 in to appear when you select a new drawing type___________ in the

command line and press enter, then type 1 and press enter.

a. display c. quit

b. new d. startup

____ 42.

Figure 111

The icon Figure 111 is a ________________ used to convert line segments into a single compound object.

a. polyline c. spline

b. polygon d. fillet

____ 43.

Figure 112

The icon Figure 112 provides a choice of ____________ to make current or change selected object.

a. lineweight c. linetypes

b. line height d. multi lines


Name: ________________________ ID: A

11

____ 44.

The icon below that creates an equilateral closed polyline by specifying the different parameters including

the number of side is

a. c.

b. d.

____ 45.

The icon below that is used to hatch and fill an enclosed area or selected objects with a hatch pattern or fill is

a. c.

b. d.

____ 46.

The icon below that is used to create a circle using a center point and a radius

a. c.

b. d.

____ 47.

The icon below that is used to create a circle with a s specified radius tangent to two objects.

a. c.

b. d.

____ 48.

Figure 113

Figure 113 is a(n) ___________________ polygon

a. Inscribed b. Circumscribed


Name: ________________________ ID: A

12

____ 49.

Figure 114

Figure 114 is a(n) ___________________ polygon

a. Inscribed b. Circumscribed

____ 50.

Figure 115

In Figure 115, when the draw panel not on the home panel and is floating on the graphics window is called a

a. floater c. sidebar

b. sticky panel d. note


Name: ________________________ ID: A

13

____ 51.

Figure 116

Figure 116 is the______________________ dialog box

a. dimension style manager c. options manager

b. page setup manager d. drawing manager


Name: ________________________ ID: A

14

____ 52.

Figure 116

The tab in Figure 116 to change the drawing measurements from decimal to architectural is

a. symbols and arrors c. primary units

b. text d. lines


Name: ________________________ ID: A

15

____ 53.

Figure 116

The tab in Figure 116 to change the dimension lines to architectural tick is

a. symbols and arrors c. primary units

b. text d. lines


Name: ________________________ ID: A

16

____ 54.

Figure 117

Select _______________ Figure 117 to locate the middle of a line

a. midpoint c. tangent

b. center d. node


Name: ________________________ ID: A

17

____ 55.

Figure 117

Select _______________ Figure 117 to locate the middle of a circle

a. midpoint c. tangent

b. center d. node


Name: ________________________ ID: A

18

____ 56.

Figure 117

Select _______________ Figure 117 to create a line that touches a circle

a. midpoint c. tangent

b. center d. node


Name: ________________________ ID: A

19

____ 57.

Figure 118

In Figure 118 to remove the blue grips around the viewport, select the _____________ keypad key.

a. ctrl c. alt

b. esc d. backspace


Name: ________________________ ID: A

20

____ 58.

Figure 119

In Figure 119 to center the house elevation full screen, you should

a. Press Shift Home c. Press Ctrl-Alt-Delete

b. Press Esc on keyboard d. double click mouse wheel

____ 59.

The measurement highlighted in green is

a. 3/4 inch c. 3-1 /8 inches

b. 3-3/4 inches d. 4 inches

____ 60. The measurement highlighted in green is

a. 1-1/8 inches c. 1-5/8 inches

b. 1-1/4inches d. 2-1/8 inches


ID: A

1

CADD 1 Midterm Exam STUDY GUIDE 60 questions

Answer Section

MULTIPLE CHOICE

1. ANS: A PTS: 1

2. ANS: B PTS: 1

3. ANS: A PTS: 1

4. ANS: C PTS: 1

5. ANS: B PTS: 1

6. ANS: A PTS: 1

7. ANS: D PTS: 1

8. ANS: B PTS: 1

9. ANS: B PTS: 1

10. ANS: C PTS: 1

11. ANS: D PTS: 1

12. ANS: A PTS: 1

13. ANS: B PTS: 1

14. ANS: A PTS: 1

15. ANS: C PTS: 1

16. ANS: C PTS: 1

17. ANS: D PTS: 1

18. ANS: B PTS: 1

19. ANS: A PTS: 1

20. ANS: C PTS: 1

21. ANS: B PTS: 1

22. ANS: A PTS: 1

23. ANS: D PTS: 1

24. ANS: C PTS: 1

25. ANS: C PTS: 1

26. ANS: B PTS: 1

27. ANS: B PTS: 1

28. ANS: D PTS: 1

29. ANS: B PTS: 1

30. ANS: B PTS: 1

31. ANS: A PTS: 1

32. ANS: A PTS: 1

33. ANS: B PTS: 1

34. ANS: D PTS: 1

35. ANS: B PTS: 1

36. ANS: C PTS: 1

37. ANS: A PTS: 1

38. ANS: A PTS: 1

39. ANS: C PTS: 1


ID: A

2

40. ANS: C PTS: 1

41. ANS: D PTS: 1

42. ANS: A PTS: 1

43. ANS: C PTS: 1

44. ANS: B PTS: 1

45. ANS: D PTS: 1

46. ANS: B PTS: 1

47. ANS: C PTS: 1

48. ANS: B PTS: 1

49. ANS: A PTS: 1

50. ANS: B PTS: 1

51. ANS: A PTS: 1

52. ANS: C PTS: 1

53. ANS: A PTS: 1

54. ANS: A PTS: 1

55. ANS: B PTS: 1

56. ANS: C PTS: 1

57. ANS: B PTS: 1

58. ANS: D PTS: 1

59. ANS: B PTS: 1

60. ANS: A PTS: 1