LSF Halogen Free (Zero Halogen) Cable & Wiring Duct and Trunking Panduit Noryl
Cable Trunking - ausrollform.com.au Trunking Brochure.pdf · Australian Rollforming manufactures an...
2
Australian Rollforming manufactures an extensive range of standard and custom formed Cable Trunking profiles for a wide variety of railway and other applications. Made from durable, lightweight steel to all Australian Railway Authority requirements, Australian Rollforming Cable Trunking is manufactured to Australian Standard 1397 - G300, and is available with either ribbed or plain trunking flanges. Steel base thicknesses are usually 1.2, 1.6, 2.0 and 3.0mm, but other thicknesses, materials and profile dimensions can also be provided. All Australian Rollforming Cable Trunking is available with Z275, Z450 and Z600 zinc coatings The cover is designed to fit neatly over the trunking flanges, minimising the entry of dirt and moisture, and Australian Rollforming Cable Trunking is laid with a slight gap at each join, allowing any moisture to simply drain away. PLAIN TRUNKING FLANGES RIBBED TRUNKING FLANGES 110 105 20 100 1.6 2.5 205 200 20 145 1.6 2.0 155 150 20 145 1.6 1.6 Cable Trunking
Transcript of Cable Trunking - ausrollform.com.au Trunking Brochure.pdf · Australian Rollforming manufactures an...
-
Australian Rollforming manufactures an extensive range of standard and custom formed Cable Trunking profiles for a wide variety of railway and other applications.
Made from durable, lightweight steel to all Australian Railway Authority requirements, Australian Rollforming Cable Trunking is manufactured to Australian Standard 1397 - G300, and is available with either ribbed or plain trunking flanges.
Steel base thicknesses are usually 1.2, 1.6, 2.0 and 3.0mm, but other thicknesses, materials and profile dimensions can also be provided. All Australian Rollforming Cable Trunking is available with Z275, Z450 and Z600 zinc coatings
The cover is designed to fit neatly over the trunking flanges, minimising the entry of dirt and moisture, and Australian Rollforming Cable Trunking is laid with a slight gap at each join, allowing any moisture to simply drain away.
PlAin TRunking FlAnges
Ribbed TRunking FlAnges
110
105
20
100
1.6
2.5
205
200
20
145
1.6
2.0
155
150
20
145
1.6
1.6
Cable Trunking
-
Australian Rollforming is a custom metal rollforming specialist, with the capability to rollform an almost infinite number of profiles in a wide range of metals.
Contact us to discuss your requirements.
Australian Rollforming Manufacturers Pty Ltd 17 - 23 Gaine Rd, DANDENONG SOUTH VIC 3175 AUSTRALIA
Phone 61 3 8769 7444 email [email protected] Fax 61 3 8768 7496 Website www.ausrollform.com.au AUSTRALIAN STEEL INSTITUTE
Member of
© Copyright in this material vests in Australian Rollforming Manufacturers Pty Ltd and may not be reproduced, adapted, published or communicated to the public without the express written permission of the copyright owner.
innovation Quality Reliability
Australian Rollforming Cable Trunking sections are continuous rollformed from coils of galvanised steel strip and this enables the production of trunking and cover sections in long lengths, custom cut to suit your requirements.
Long-length trunking means less joins and provides opportunities for economies in material cost and installation time. The maximum length of the trunking is limited only by the ability of the customer to handle and transport the sections.
If it is intended to use Australian Rollforming Cable Trunking within 1km of salt marine locations or in severe industrial or unusually corrosive environments, advice on material suitability should be discussed with
Australian Rollforming engineers prior to placement of order.
