Supports 2013 vehicles with Mack or Volvo enginesMust be used with 2013 OBDII portWorks with current version of PTTWorks with DLA+ 2.0 Adapter familyLength 1’

P/N: 121591 | 16-Pin OBD-II Type-B - Mack & Volvo

DLA+ 2.0 ADAPTERCable Reference Card

Fully SAE compliantSupports most OEM applicationsSupports Tri “CAN” network Supports SAE J1587/J1708 & J1939 communications and a third CAN Channel Connects to all 9-pin Deutsch diagnostic connectors in cabSupports Type 1 or Type 2 9-pin connectionsWorks with DLA+ 2.0 Adapter familyLength: 1’

P/N: 121891-TC | Type-2 9-Pin

Supports SAE J1708 communications Connects to all 6-pin Deutsch diagnostic connectors in the cabWorks on most 2005 or older vehiclesWorks with DLA+ 2.0 Adapter familyLength: 5’

P/N: 121721 | 6-Pin

P/N: 121671 | 16-Pin OBD-II Type-B - GM

Specifically engineered to work with Ford OEM pin-out configuration for full coverage and functionalityWorks with DLA+ 2.0 & DLA+ 2.0 Wireless AdaptersLength 1’

Specifically engineered to work with GM OEM pin-out configuration or full coverage and functionalityWorks with DLA+ 2.0 & DLA+ 2.0 Wireless AdaptersLength 1’

P/N: 321152-B | 16-Pin OBD-II Type-B - Medium-DutySpecifically engineered to work with Sprinter, Hino & ISUZU OEM pin-out configuration for full coverage and functionalityWorks with DLA+ 2.0 & DLA+ 2.0 Wireless AdaptersLength 1’

P/N: 121661 | 16 Pin OBD-II Type-B - Ford

Connects Cummins engine ECU to any heavy-duty adapterIncludes: backbone plug, 3-pin plug, & male-to-female adapterLength: 3’

P/N: 122131 | Cummins Cable Kit

HEA

VY-D

UTY

MED

IUM

-DU

TY

Fully SAE compliant; Supports most OEM applicationsDoes NOT support Dual “CAN” network on some Freightliner® vehicles when using OEM software.Supports SAE J1587/J1708 & J1939 communications Connects to all 9-pin Deutsch diagnostic connectors in cabLength: 5’Use P/N:12189-DC for OEM software on Freightliner vehicles.

P/N: 12189 | 9-Pin

Used on Freightliner vehicles with Detroit Diesel Diagnostic Link or Freightliner ServiceLink applicationsSupports SAE J1587/J1708/J1939 and second CAN ChannelSupports ESA on most PACCAR Heavy-Duty vehicles.

P/N: 12189-DC | 9-Pin - DUAL CAN

Supports SAE J1708 communications Connects to all 6-pin Deutsch diagnostic connectors in the cabWorks on most 2005 or older vehiclesLength: 5’

P/N: 12172 | 6-Pin

P/N: 12167 | 16-PIN OBD-II - GM

Specifically engineered to work with Ford OEM pin-out configuration for full coverage and functionalityDesigned to use with DLA+ adapter familyLength 5’

Specifically engineered to work with GM OEM pin-out configuration for full coverage and functionalityDesigned to use with DLA+ adapter familyLength 5’

P/N: 12170 | 16-Pin OBD-II - SprinterSpecifically engineered to work with Sprinter OEM pin-out configuration for full coverage and functionalityDesigned to use with DLA+ adapter familyLength 5’

P/N: 12166 | 16 Pin OBD-II - Ford

Powers your adapter from a secondary sourceConnect directly to the trailer using a seondary power source to energize the trailer multi-pole connectorWorks with Trailer Diagnostic & DLA+ PLC Adapters

P/N: 121003J-560 Power Supply Cable

Connects PLC Adapter to the trailer’s ABS System7-way interface at the nose of trailersWorks with Trailer Diagnostic & DLA+ PLC AdaptersLength: 10’

P/N: 32111PLC J-560 Cable w/ T-Connector

Connects Cummins engine ECU to any heavy-duty adapterIncludes: backbone plug, 3-pin plug, & male-to-female adapterLength: 10’

P/N: 12213 | Cummins 3-Pin Cable

Supports 2013 vehicles with Mack or Volvo enginesMust be used with 2013 OBDII portVolvo PTT 2.0 ApprovedLength 5’

P/N: 12159 | 16-Pin OBD-II Mack & Volvo

DLA+ ADAPTERCable Reference Card

HEA

VY-D

UTY

MED

IUM-DUTY

TRAILERS

CABLE REFERENCE CARD © 2020 Noregon. All Rights Reserved. | CRC-GEN-2020-01-010620