Cable Protection Systems - Radius Systems...

Telecoms

Cable Protection SystemsDucting Systems

2010

CPS/TELDS 11/10

Stockist Stamp

2011

Pioneers in PE Pipe Technologies

S y s t e m s

Head Office & International Sales

Radius Systems LtdRadius House, Berristow LaneSouth Normanton, Alfreton, DerbyshireDE55 2JJ, UKt: +44 (0)1773 582329e: [email protected]

N. Ireland and Rep. of Ireland Sales

Radius Plastics LtdScarva Road Industrial EstateBanbridge, Co. DownBT32 3QD, UKt: +44 (0)28 4066 9999e: [email protected]

Middle East Sales

RadiusSenaat (Piping and Fittings) LLCICADBusiness Hub B206MussafahAbu Dhabi, UAEt: +971 2 5503277e: [email protected]

The content of this publication is for information only. Such information is given in gooth faith and Radius Systems accepts no liability for its content.

www.radius-systems.com

HDPE Twin Wall Ducting

A lightweight, high strength main duct system providing excellent cable protection and fast underground installation.

Corrugated on the outside, smooth on the inside, twin wall HDPE (High Density Polyethylene) duct has a high static and dynamic load bearing capacity combined with high impact resistance. The smooth inner bore combined with the lower frictional co-efficient of HDPE, reduces the effort required to install long lengths of sub-duct and cable.

Fast and easy installation

Resistance to compression type 450N and 750N

Lightweight with high ring stiffness

Flexible — less joints required

Easily repaired

Environmentally friendly

HDPE Low Friction Ducting

A high performance low-friction HDPE sub-duct system providing excellent cable protection and management for underground and aerial networks. The tough outer HDPE coating provides lifetime mechanical protection while the internal solid polymer coating provides permanent lubrication and a low coefficient of friction for optimised lengths of cable installation.

Low friction permanent coating

Tough, durable HDPE

High performance in complex installations

(for example many bends and gradients)

Available empty, pre-roped, pre-taped or pre-cabled

•

uPVC Ducting

A solid wall main duct system manufactured from unplasticised polyvinyl chloride (uPVC). A durable high quality construction, uPVC ducting is manufactured with performance criterias to meet customer and industry standards.

Durable

High quality construction

Resistance to compression

Manufactured to recognised industry standards

�

Telecoms Ducting Systems


�


High Performance Low Friction DuctOD/ID Nom. OD Wall thickness Max Pull Load(mm) (mm) Min (mm) (kN)

Light Duty (SDR17.5) — for sub-duct applications

Direct Install

20/18 17.9 1.0-1.3 1

25/22 22.3 1.3-1.6 1

26/23 23.1 1.4-1.7 2

31/27 27.7 1.6-1.9 2

32/28 28.5 1.7-2.0 2

37/32 32.7 1.9-2.3 3

38/33 33.8 2.0-2.4 3

40/35 35.6 2.1-2.5 4

44/39 39.2 2.3-2.7 4

50/44 44.4 2.7-3.1 6

53/55 55.8 3.5-3.9 10

75/66 66.5 4.2-4.6 14

General Purpose (SDR13.5) — for primary and sub-duct applicationsDirect Install and Direct Bury

20/17 17.1 1.4-1.7 1

25/21 21.5 1.7-2.0 2

26/22 22.3 1.8-2.1 2

31/26 26.7 2.1-2.4 3

32/27 27.5 2.2-2.5 3

37/31 31.6 2.5-2.8 4

38/32 32.5 2.7-3.0 4

40/34 34.3 2.8-3.1 5

44/37 37.6 3.1-3.5 6

50/42 42.8 3.5-3.9 8

63/54 54.0 4.4-4.8 12

75/64 64.1 5.4-5.8 17

Heavy Duty (SDR11) — for primary duct applicationsDirect Bury and Direct Mole Ploughing

20/16 16.1 1.7-2.0 1

25/20 20.7 2.1-2.4 2

26/21 21.5 2.2-2.5 2

31/25 25.6 2.6-3.0 3

32/26 26.4 2.7-3.1 4

37/30 30.3 3.1-3.5 5

38/31 31.4 3.2-3.6 5

40/33 33.0 3.4-3.8 6

44/36 36.2 3.8-4.2 7

50/41 41.2 4.3-4.7 9

63/52 51.8 5.4-6.0 14

75/62 61.9 6.4-7.0 20

Smooth or ribbed inner wallSupplied empty, pre-roped, pre-taped or pre-cabledFull range of standard solid colours and stripesMono duct or multiduct configurationSupplied on drums, strapped coils or straight lengthsPrint as per customer’s requirements

Low Friction

A solid layer of lubricant is evenly distributed on the inner wall by co-extrusion providing a permanent low friction surface for the life of the duct.

Low friction values allow long installation lengths of delicate fibre optic cable by pulling or blowing.

Cable

HDPE

Solid LubricantLayer

Standard Colours

The above represents most standard sizes, other OD/IDs are available on request

�



Low Smoke Zero HalogenWe provide specialised Low Smoke Zero Halogen (LSZH) ducting with flame retardant properties for use in buildings and tunnelsManufactured to EN500862-4 and IEC332/1Size and colours to suit user requirements

Bundled Ducts AssembliesWe can supply duct bundles with an outersheath to suit your applications

Special RequirementsWe have the facilities to meet specific customer requirements. Our technical/development team has developed many bespoke products over the years and will be pleased to offer their expertise


�

Size (mm) Colour Pack Qty Product Code

23.1 - 27.4 Black 12 ZA0658

29.2 - 31.7 Silver Grey 12 ZA0659

30.0 - 36.0 Aluminium 12 ZA0660

35.6 - 39.9 Green 12 ZA0661

37.6 - 43.2 Burgundy 12 ZA0662

40.6 - 47.0 Champagne 12 ZA0663

45.7 - 50.8 Navy Blue 12 ZA0664

58.7 - 63.8 Bronze 12 ZA0665

71.1 - 78.0 Brown 12 ZA0666

112.0 - 118.1 Turquoise 12 ZA0667

118.1 - 124.5 Aqua 12 ZA0668

Size (mm) Pack Qty Product Code

32 70 ZA0776

40 60 ZA0777

50 33 ZA0778


Plain Connector

16 70 XV0002

20 50 XV0003

25 30 XV0004

31 70 ZA0776

32 70 ZA0776

40 60 ZA0777

50 33 ZA0778

63 15 XV0009

With Lubricating Nozzle

37 40 US0000


Push Fit /Compression Connectors

Compression Connectors

Threaded Connectors

Please contact us for other size requirements

Watertight and airtight push fit and compression mechanism

Watertight and airtight screw on fitting

For joining two lengths of duct without greatly increasing the overall diameter

�



17-24 1 ZA0799

23-30 1 ZA0802

29-36 1 ZA0803

35-44 1 ZA0804

45-58 1 ZA0805


Pulling Eyes

Connector Swivels Size (mm) Length (mm) Pack Qty Product Code

Non-fused Swivel

22 85.7 1 ZA2850

32 178 1 ZA2851

Fused Swivel

16 82 1 ZA0763

22 102 1 ZA2855

Shear Pins - for use with fused swivel

0.9kN for 16mm swivel 10 ZA2856




2kN for 22mm swivel 10 ZA2858





Duct Clip Size (mm) Pack Qty Product Code

2 x 40mm 500 ZA0772Fixed to walls with screws (not included)

Tapered, threaded sub-duct pulling eye with clevis end

For pulling fibre optic cable


�

Description Colour Length (m) kN Product Code

Low Friction Cord Orange 3300 8 ZA0026



8 1 ZA2863

10 1 ZA2864

Description Pack Qty Product Code

2-way 1 ZA0077

3-way 1 ZA0032

4-way 1 ZA0033


Low Friction Draw Cord

Links

Pulling HarnessFor pulling cable or sub-duct together

Standard screw type rope links

�



42 1 ZA0768

63 1 ZA2870


25 1 ZA0767

32 1 ZA0768

37 1 ZA0771

40 1 ZA0770


32 1 US0011

37 1 US0012

40 1 US0013

50 1 US0014


16 500 ZA0794

20 500 ZA0795

25 500 ZA2875

31 500 ZA0796

32 500 ZA2876

34 500 ZA0797

37 500 ZA2877

40 500 ZA0798

50 500 ZA2878

Duct Cutters

Pre-cabled Duct Cutters


Chamfer Tools

Flexible End Caps

For cutting duct in a controlled fashion without damaging cables

Provides a chamfered edge on both inside and outside of duct

Universal seal for preventing ingress of silt and waterOuter fit

Telecommunications Ducting SystemsTelecoms Ducting Systems

10

HDPE Twin Wall Ducting Manufactured in accordance with BS EN50086-2- 4

OD/ID (mm) Length (m) Pack Qty (Lengths) Product Code

450N Compression Type

63/50 6 108 CX0369

105/89 6 120 CX0439

110/94 6 110 CX0509


63/50 6 108 CX0371

105/89 6 120 CX0441

110/94 6 110 CX0511

Lengths — Green

Lengths — Light Grey OD/ID (mm) Length (m) Pack Qty (Lengths) Product Code


63/50 6 108 CR0369

105/89 6 120 CR0439

110/94 6 110 CR0509


63/50 6 108 CR0371

105/89 6 120 CR0441

110/94 6 110 CR0511

Lengths — White OD/ID (mm) Length (m) Pack Qty (Lengths) Product Code


63/50 6 108 DQ0369

105/89 6 120 DQ0439

110/94 6 110 DQ0509


63/50 6 108 DQ0371

105/89 6 120 DQ0441

110/94 6 110 DQ0511

Includes one coupler per length Sealing rings sold separately



Note: Twin Wall is also available to Eircom 850N specification

KM 62102

KM 62102

KM 62102

11



1�

OD/ID (mm) Bend (mm) Radius Pack Qty Product CodeGreen

Product CodeLight Grey


63/50 11¼° 150 50 EP0959 EP1478

63/50 22½° 150 50 EP0960 EP1479

63/50 45° 150 50 EP0961 EP1480

63/50 90° 150 50 EP0962 EP1481

105/89 11¼° 200 15 EP0967 EP1486

105/89 22½° 200 15 EP0968 EP1487

105/89 45° 200 15 EP0969 EP1488

105/89 90° 200 10 EP0970 EP1489

110/94 11¼° 200 15 EP0975 EP1494

110/94 22½° 200 15 EP0976 EP1495

110/94 45° 200 15 EP0977 EP1496

110/94 90° 200 10 EP0978 EP1497


63/50 11¼° 150 50 EP0963 EP1482

63/50 22½° 150 50 EP0964 EP1483

63/50 45° 150 50 EP0965 EP1484

63/50 90° 150 50 EP0966 EP1485

105/89 11¼° 200 15 EP0971 EP1490

105/89 22½° 200 15 EP0972 EP1492

105/89 45° 200 15 EP0973 EP1493

105/89 90° 200 10 EP0974 EP1494

110/94 11¼° 200 15 EP0979 EP1498

110/94 22½° 200 15 EP1080 EP1499

110/94 45° 200 15 EP1081 EP1500

110/94 90° 200 10 EP1082 EP1501

HDPE Twin Wall Ducting Manufactured in accordance with BS EN50086-2-4

Bends Includes one coupler per lengthSealing rings sold separately

Coupler OD (mm) Pack Qty Product Code Black

Product CodeGreen


63 200 EP0107 EP1057 EP1576

105 50 EP0111 EP1061 EP1580

110 50 EP0113 EP1063 EP1582

Secure push fit supplied with each length Sealing rings not included

Sealing RingsFor sealed systems, two sealing rings required per length

OD (mm) Pack Qty Product Code

63 50 ZA0137

105 50 ZA0138

110 50 ZA0139

1�


HDPE Twin Wall Ducting Manufactured in accordance with BS EN50086-2-4

Hockey Stick

Equal Y

Reducer

OD (mm) Pack Qty Product Code Green

Product Code Light Grey

63 20 EP1309 EP1828



63 20 EP1367 EP1886

105 10 EP0433 EP1902

110 10 EP0441 EP1910



63/50 50 EP1102 EP1621

110/96 50 EP1136 EP1646

110/100 50 EP1139 EP1658

Swept Tee OD (mm) Pack Qty Product Code Green


105/105/63 18 EP1224 EP1743

110/110/63 18 EP1236 EP1755This item is available in other colours subject to minimum order quantity and lead time

This item is available in other colours subject to minimum order quantity and lead time




1�

Nom. OD (mm)

Nom. ID (mm)

Nom. Wall Thick (mm)

Length (m) Pack Qty (Lengths)

Product Code


54 50 2.1 6 390 UK1101

88.9 83 2.95 6 127 UK1360

96.5 90 3.1 6 105 UK1102

110 103 3.37 6 86 UK1363

125 118 3.7 6 68 UK1366

160 151 4.35 6 39 UK1369


54 49 2.5 6 390 UK1373

88.9 82 3.5 6 127 UK1376

96.5 89 3.7 6 105 UK1379

110 102 4.0 6 86 UK1382

125 116 4.35 6 68 UK1385

160 150 5.13 6 39 UK1388

Nom. OD (mm)

Nom. ID (mm)

Nom. Wall Thick (mm)

Length (m) Pack Qty (Lengths)

Product Code


54 50 2.1 6 390 UK1392

88.9 83 2.95 6 127 UK1395

96.5 90 3.1 6 105 UK1109

110 103 3.37 6 86 UK1398

125 118 3.7 6 68 UK1401

160 151 4.35 6 39 UK1404


54 49 2.5 6 390 UK1408

88.9 82 3.5 6 127 UK1411

96.5 89 3.7 6 105 UK1414

110 102 4.0 6 86 UK1417

125 116 4.35 6 68 UK1420

160 150 5.13 6 39 UK1423

Lengths — Green

uPVC Ducting Manufactured in accordance with BS EN50086-2-4

Lengths — Light Grey

250N pipe also available on request. Other colours available on request

SocketedPrinted to customer’s requirements

250N pipe also available on request. Other colours available on request

Socketed Printed to customer’s requirements

1�


Bends


Socketed

For Pipe OD (mm)

Bend Pack Qty Product CodeGreen


54 45° 10 UN0032 UM0032

54 90° 10 UN0033 UM0033

89 11¼° 5 UN0034 UM0034

89 22½° 5 UN0035 UM0035

89 45° 5 UN0036 UM0036

89 90° 5 UN0037 UM0037

96.5 11¼° 5 UN0038 UM0038

96.5 22½° 5 UN0039 UM0039

96.5 45° 5 UN0040 UM0040

96.5 90° 5 UN0041 UM0041

110 11¼° 5 UN0042 UM0042

110 22½° 5 UN0043 UM0043

110 45° 5 UN0044 UM0044

110 90° 5 UN0045 UM0045

125 11¼° 5 UN0046 UM0046

125 22½° 5 UN0047 UM0047

125 45° 5 UN0048 UM0048

125 90° 5 UN0049 UM0049

160 11¼° 1 UN0050 UM0050

160 22½° 1 UN0051 UM0051

160 45° 1 UN0052 UM0052

160 90° 1 UN0053 UM0053

Couplers OD (mm) Pack Qty Product CodeGreen


54 50 UN0011 UM0011

89 50 UN0012 UM0012

96.5 50 UN0013 UM0013

110 50 UN0014 UM0014

125 40 UN0015 UM0015

160 20 UN0016 UM0016This item is available in other colours subject to minimum order quantity and lead time



1�


Equal Y

Reducer

OD (mm) Pack Qty Product CodeGreen


96.5 1 UN0020 UM0020

110 1 UN0022 UM0022

OD (mm) Pack Qty Product CodeGreen


89/54 50 UN0070 UM0070

96.5/54 50 UN0071 UM0071

96.5/89 50 UN0072 UM0072

100/96.5 50 UN0073 UM0073

110/96 50 UN0074 UM0074

114/96 40 UN0075 UM0075

125/110 40 UN0076 UM0076

Swept Tee OD (mm) Pack Qty Product CodeGreen


96.5 x 54 20 UN0001 UM0001

110 x 54 18 UN0002 UM0002This item is available in other colours subject to minimum order quantity and lead time



Oversleeve OD (mm) Pack Qty Product CodeGreen


54 50 UN0060 UM0060

89 40 UN0061 UM0061

96.5 40 UN0062 UM0062

110 35 UN0063 UM0063

125 25 UN0064 UM0064

160 20 UN0065 UM0065This item is available in other colours subject to minimum order quantity and lead time

1�


General Fittings and Accessories

End Caps OD (mm) Pack Qty Product Code

63 50 ZA0111

105 50 ZA0014

110 50 ZA0115

120 50 ZA0117

145 50 ZA0119

178 50 ZA0122Yellow as standard, other colours available subject to minimum order quantities and lead time

Dust tight temporary sealOuter fit

Duct Brush Brush Dia. (mm) Duct ID.(mm) Pack Qty Product Code

86 105 1 ZA0001

95 110 1 ZA0002

Duct Mandrel Mandrel Dia. (mm) Duct ID.(mm) Pack Qty Product Code

79 105 1 ZA0003

84 110 1 ZA0004

Draw Cord Description Colour Length (m) kN Product Code

Polypropylene Cord Blue 500 5 ZA0025



Cylindrical bristle brush for cleaning duct bores

Steel mandrel with swivelling eyes for proving duct runs


1�

Duct OD. (mm) Type Pack Qty Product Code

40 2-way 50 ZA0036

40 4-way 50 ZA0037

40 6-way 50 ZA0038

40 8-way 50 ZA0039

63 2-way 50 ZA0044

63 4-way 50 ZA0045

63 6-way 50 ZA0046

63 8-way 50 ZA0047

105 2-way 50 ZA0048

105 4-way 50 ZA0049

105 6-way 50 ZA0050

105 8-way 50 ZA0051

110 2-way 50 ZA0052

110 4-way 50 ZA0053

110 6-way 50 ZA0054

110 8-way 50 ZA0055


Cable Duct Lubricant Size (Litres) Pack Qty Product Code

1 1 ZA0183

20 1 ZA0102

Duct Organisers

Other types are available subject to minimum order quantity and lead time

1�

Warning Tape Service Colour Dimensions Product Code

Fibre Optic Green 150mm x 100µ ZA0076365m rolls

Other types are available subject to minimum order quantity and lead time

For use in duct management

1�


1�

Duct Sealing Systems

Access Chambers Systems

We offer a complete range of high quality duct sealing systems providing airtight and gastight protection in the duct network. Please refer to our “Duct Sealing Systems” brochure for full details.

Our range of preformed access chambers is ideally suited to telecom networks. QuadBox is a stackable segmental system approved by British Telecom for use in its national network. RadBox is a versatile and fully modular system with panels and corners which fit together to create almost any size of chamber. It is an ideal solution for large or unusually sized chambers. Please refer to our “Access Chamber Systems” brochure for full details.


RadBox®

QuadBox®

Telecoms

Cable Protection SystemsDucting Systems

2010

CPS/TELDS 11/10

Stockist Stamp

2011

Pioneers in PE Pipe Technologies

S y s t e m s

Head Office & International Sales

Radius Systems LtdRadius House, Berristow LaneSouth Normanton, Alfreton, DerbyshireDE55 2JJ, UKt: +44 (0)1773 582329e: [email protected]

N. Ireland and Rep. of Ireland Sales

Radius Plastics LtdScarva Road Industrial EstateBanbridge, Co. DownBT32 3QD, UKt: +44 (0)28 4066 9999e: [email protected]

Middle East Sales

RadiusSenaat (Piping and Fittings) LLCICADBusiness Hub B206MussafahAbu Dhabi, UAEt: +971 2 5503277e: [email protected]

The content of this publication is for information only. Such information is given in gooth faith and Radius Systems accepts no liability for its content.

www.radius-systems.com

Cable Protection Systems - Radius Systems...

Documents

Transcript of Cable Protection Systems - Radius Systems...