TOP MOUNTED CABLE FLOAT LEVEL SWITCHES (Suitable for general water applications such as bore water)

Our Company is actively engaged in presenting a broad spectrum of Cable Float Level Sensors mainly for water applications . These are designed by making use of Top

Quality Material of reputed brands of Electrical & Electronics Components with latest & inventive techniques as well as thoroughly inspection done by our people with latest ones.

Technical Specs : Type : Top Mounted Cable Float switch. Type of Switch : Micro switch rated 10Amps

at 230VAC Change over contact ( NC,C,NO) Total Length of the cable : Minimum 3mtrs to Max. Up to 20mtrs. Float : Rectangular – 110mmL X 86mmB X 46mmH Maximum Switching Voltage : 230 VAC Output relays : Provided for Valve & Pump Maximum Working Temperature : 70oC Maximum Working Pressure : 2 kg/cm2 Protection : IP68 ( CE Certified ).

Note : The above switch may come along with two Levels. i.e. HIGH & LOW. All are potential free contacts. If needed, terminal enclosure may come in Flameproof.

Working Procedure: Can be connectable with directly STARTER COILS of PUMPS / any PLC’s and as per the NO /

NC contacts, PUMP’s may START / STOP as well as HOOTER may activate.

Suggestion: Might to be operate PUMPS thru our Controller, Switch may works with LOW Voltage of

6VDC and operates PUMP smoothly with provided potential relays and works long time.

Contact:

INSTRUMENTS (Process Automation & Control Solutions - Mechanical & Instruments Supplier)

H #. 1-10-28/30/1, Opp. MRR High School, Main Road, Kushaiguda - Cherlapally Road, Nagarjuna Nagar, Kushaiguda, ECIL Post, Hyderabad-62, TS.

@: hemainstruments@gmail.com ; sales@hemainstruments.com www.hemainstruments.com

M: +91 98486 49035 | +91 81218 89111 _________________________________________________________________________________________________________________________________

Quality improvement comes via simplification of design, manufacturing with safety features… layouts, processes and procedures