Cable crimping

18
Ethernet Cable Crimping Created By: Vyas Pratik

Transcript of Cable crimping

Page 1: Cable crimping

Ethernet Cable Crimping

Created By: Vyas Pratik

Page 2: Cable crimping

What is Ethernet Cable Crimping??

The name Ethernet Cable Crimping present itself.

It means “Creating” an Cable which use to

communication purpose.

Page 3: Cable crimping

Types of Ethernet Cable•Cat 3

•Cat 5

•Cat 5E

•Cat 6

•Cat 7

Page 4: Cable crimping

NOTE:- MOST COMPANIES TODAY ARE STILL USING AND EVEN

INSTALLING CATEGORY 5E AS IT WORKS FOR THE 100MB FAST-

ETHERNET IN USE ON ALMOST EVERY DESKTOP PC.

Cat 3 :- Used for voice cabling and 10 Mb Ethernet

Cat 5 :- Used for 10/100Mb Ethernet and works for voice

Cat 5E :- Used for 100/1000Mb(1 GB) Ethernet for cross-talk

event

Cat 6 :-Better than Cat 5E for 1GB Ethernet

Cat 7 :- Also called Class F, this is fully-shielded cabling and

supports up to 600Mhz. This is a relatively new type of

cabling and isn’t used much.

Page 5: Cable crimping

Category Data-Rate Signal Frequency

Cat 5 100 Mbps 100MHz

Cat 5E 100 Mbps – 1 Gbps 100MHz

Cat 6 1 Gbps – 10 Gbps 250MHz

Cat 7 1 Gbps – 10 Gbps 500MHz

Note:- It Change By manufacture Companies.

Page 6: Cable crimping

Ethernet Cable It is composed of 4-pair twist wirings.

Orange

Green

Blue

Brown

Page 7: Cable crimping

Color Pin (T568B)

White/Orange 1

Orange 2

White/Green 3

Blue 4

White/Blue 5

Green 6

White/Brown 7

Brown 8

Ethernet Cable

Page 8: Cable crimping

Pin Usage

1 Transmission (Tx+)

2 Transmission (Tx-)

3 Receive (Rx+)

4 --

5 --

6 Receive (Rx-)

7 --

8 --

Note:- Here Cable color doesn’t important for desktop use.

Ethernet Cable

Page 9: Cable crimping

How to wire…..Step 1: Strip back the outer sleeve.

Page 10: Cable crimping

How to wire…..Step 2: Arrange in particular Design..

Page 11: Cable crimping

How to wire…..Step 2: Cont….

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

Page 12: Cable crimping

How to wire…..Step 3: Cut every wire in straight line…..

Page 13: Cable crimping

How to wire…..Step 3: Cont….

Page 14: Cable crimping

How to wire…..

• Step 4: Now Insert Wires into RJ45

Page 15: Cable crimping

How to wire…..Step 5: Crimp the RJ45 plug with the crimping tool.

Page 16: Cable crimping

How to wire…..Step 6: Verify the order of the wires is correct and all

the wires are correctly making good contact with the

metal contacts in the RJ45 plug.

Page 17: Cable crimping

How to wire…..Step 7: Cut the cable into suitable length and repeat all

the steps for the other side.

And test it…….

Page 18: Cable crimping

Reference

Wikipediahttp://en.wikipedia.org/wiki/Category_5_cable

Cat5e Cablehttp://www.cat5ecable.co.uk/

How to wire Ethernet Cableshttp://www.ertyu.org/steven_nikkel/ethernetcables.html

http://www.petri.co.il