VISIONTM

Vision Products (Europe) Ltd.TM

V17 Series

High Quality Cutting Edge Design Purpose Designed Tools

Cable and Earthing Connections

IEC Connectors

Vision Products (Europe) Ltd.TM

V17-030 PlugIEC TV Male Brass/Nickel

V17-021 PlugIEC TV Male Aluminium

V17-023 AdapterIEC TV Female to F Male

Quick Fit

V17-022 AdapterIEC TV Female to F Male

V17-024 AdapterIEC TV Female

to IEC TV Female

V17-025 PlugIEC TV Male Crimp

V17-027 AdapterIEC TV Male to F Female

Brass

V17-026 AdapterIEC TV Male to F Female

Alloy

V17-028 AdapterIEC TV Male to IECTV Male

BNC Connectors

V17-052 PlugBNC Male Solderless

V17-053 AdapterBNC Male to F Female

V17-054 AdapterBNC Male to IEC

TV Female

V17-055 PlugBNC Male Twist On

Integral EarthingColour Coded green

and yellow

Industry Standard CodingOn signal cables of

- Red Vertical High

- Black Vertical Low

- Yellow Horizontal High

- Green Horizontal Low

- White Terrestrial

V5 Multicore CableFor Satellite and Terrestrial IRS

V4 Multicore CableFor Satellite Only IRS

V5-500LSF V4-400LSF

LSF RatingFor compliance to

regulatory requirements

Tough Protective

PVC SheathFor long service life

LSF RatingFor compliance to

regulatory requirements

Tough Protective

PVC SheathFor long service life

Integral EarthingColour Coded green

and yellow

Industry Standard CodingOn signal cables of

- Red Vertical High

- Black Vertical Low

- Yellow Horizontal High

- Green Horizontal Low

© Vision ProduTM

©2006 Vision Products (Europe) Ltd. Reproduction Prohibited. All offers subject to availability and may be changed without prior notice. All prices exclude VAT, CP&I and E&OE. Offer good while stocks last. Terms apply.

Earthing Connectors

Screw Bosslocks module in place

Different Numberof modules can be placed on earth rod

to suit range of equipment

Fast FitF-connectors make fitting

extremely easy

Modules Slideindependently to cope with configuration

of equipment from all manufacturers

Earth ClampFeatures Hex Nut for professional

installation on any brand of

Multiswitch or Amplifier

V17-063A F-Connector ModuleV17-063B Earth Rod and Clamp

www.vision-products.co.uk

cts (Europe) Ltd.

Connector Miscellany

How to fit an F-Connector

Using a suitable pair of cable cutters, create a clean and square cut cable end.

Using a two bladed cable-stripping tool, insert the cable until it is flush with

the side of the tool. Rotate the cable stripper clockwise around a few times to

ensure a clean cut through the outer sheath and the dielectric. The tool may

need to be adjusted to suit your cable. Pull the tool away from the cable

removing waste material.

Using a two bladed cable stripper, strip the cable so that the dielectric and

outer sheath are removed without damaging the foil or braid screen. You

should be left with a distance from the top of the centre core to the outer

sheath of approximately 14mm.

Fold the braid back carefully making sure that the braid is pulled back over

the outer sheath. This will be gripped by the connector when crimped.

TIP:

To help smooth the foil use the Vision connector and put it on upside down

and rotate it round twice. This will help flatten the foil down to ensure a

smooth and easy fit.

Now place the Vision connector on the correct way round using a light

twisting action. The sleeve inside the F-connector should slide between the

braid and the foil screen. Push the cable into the connector until the exposed

dielectric is flush with the internal body of the connector.

Using a crimping tool with appropriate jaw size place the connector in the jaw

of the tool so it sits on the last rib of the connector. Squeeze the tool firmly

until the jaws are closed.

Release the crimping tool and the F-connector should be crimped securely

and neatly.

TM

TM

Step-by Step Guide

7mm 7mm

Braid

1

3

4

Foil

Heavy Duty JawsMake short work of

even professional

thick wall

F-connectors

Adapter Reference ChartCrimp Connector Compatibility

Small 0.333" JawV17-101

V17-025

Medium 0.368" JawV17-100

Large 0.455" JawV17-125

V17-125RP

V17-167

F Type MaleStandard

F Type FemaleStandard

F Type Male Quick

IEC TV Male

IEC TV Female

BNC Male

V17-009 V17-006

V17-003

V17-004

V17-026

V17-027

V17-020

V17-028

V17-022 V17-023

V17-053

V17-024

V17-054

V17-005 V17-011

MaleStd

FemaleStd

MaleQuick

Male Female

F Type IEC TV

F-Connectors

V17-003 AdapterF Female to F Female

V17-004 AdapterF Male Quick

to F Female

V17-005 AdapterF Male to F Male

Quick Link

V17-006 AdapterF Male Right Angle

to F Female

V17-007 CapF Male Terminator

75 Ohm DC Pass

V17-008 CapF Male Terminator

75 Ohm DC Block

V17-009 AdapterF Male to F Male Nutted

V17-010 PlugF Male Twist 125

Reducing Pin

V17-011 AdapterF Male to IEC TV Male

V17-020 AdapterF Male to F Male

Quick Fit

F-Connectors

V17-001 PlugF Plug Twist 100

V17-167 PlugF Plug Crimp 167

V17-100 HQ Plug

V17-101

Budget PlugF Plug Crimp 100

with O Ring

V17-125RP PlugF Plug Crimp 125

Reducing Pin

V17-125 PlugF Plug Crimp 125

V17-002 PlugF Plug Twist Long Body

100

V17-060For Aerial and Satellite Masts

Earthing Strap

Earth TagFor low resistance

earth connection

Durable ConstructionCopper plated brass

AdjustableTo fit mast diameters 25-60mm

Cable and Earthing ConnectorsAlso available:

© Vision Products (Europe) Ltd.TM

©2006 Vision Products (Europe) Ltd. Reproduction Prohibited. All offers subject to availability and may be changed without prior notice. All prices exclude VAT, CP&I and E&OE. Offer good while stocks last. Terms apply.

VISIONTM

www.vision-products.co.uk

Vision Products (Europe) Ltd

Bloxham Mill

Barford Road

Bloxham, Banbury

Oxfordshire, OX15 4FF

Switchboard:

Fax:

01295 724252

01295 724253

Ingenious F-spanner tightens F-connectors

in place and reaches past obstructions

Coaxial Cable Tester provides audible and visible

identification of cabling short circuits