C-RAIL LADDER TRAY SYSTEM · Flatbar Ladder Tray C-Rail Leg-In Ladder Tray I-Beam Ladder Tray...

C-RAIL LADDER TRAY SYSTEM

©2012 OCEAN-1 MARINE PRODUCTS, LTD.

2

35

46

67

Section Page

Marine Channel

Flatbar Ladder Tray

C-Rail Leg-In Ladder Tray

I-Beam Ladder Tray

MARINE & OFFSHORE CABLE TRAY SYSTEMS


Important notice: "The information contained within this catalog is for ILLUSTRATION PURPOSES ONLY. Product and usespecifications and engineering data are not provided in this catalog, but are available upon request. Product application and fitnessfor particular purpose is determined solely by the customer and its engineering department and consultants. All product designs,dimensions, specifications, tolerances, performance, and similar characteristics are subject to change without notice."

- 46 -

2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com ©2012 OCEAN-1 MARINE PRODUCTS, LTD.

C-Rail Leg In Ladder Tray

Available in the following material finishes:Hot Dipped Galvanized

Stainless Steel


- 47 -

2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com©2012 OCEAN-1 MARINE PRODUCTS, LTD.

Cable Tray Part Numbering SystemExample Part No.: O1-4HG-12-12-10-MS-LI

O1-4HG - 12 - 12 - 10 - MS - LI

2 Side Rail Height2 = 2”3 = 3”4 = 4”5 = 5”6 = 6”7 = 7”

3 Material/FinishHG Hot Dipped GalvanizedS6 316 Stainless Steel

5 Rung Space06 = 6”09 = 9”12 = 12” (Std. Stocked Rung Space)15 = 15”

6 Length10 = 10’

3 4 5 6 7 8

8 Side Rail TypeLI Leg In C-Rail

7 Rung TypeMS Marine Slotted

1 Product CodeO1 Ocean-1

4 Width06 = 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”

21

- 48 -

2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com



43

12 1/8

1

C-Rail Leg-In Ladder Cable Tray

120

126

Slot Size

.8125"

1" O.C.

1.625"

.30"

.75"

Rung Detail

End View

Top View

Features:1. Perforations in rungs accept 5/8” coated banding

for securing cables.2. Full Strut Rung.3. Straight Sections supplied in 10’ lengths.


- 49 -


Cable Tray Fitting Part Numbering SystemExample Part No.: O1-4HG-12L12-HB90-MS-LI

O1-4HG - 12L12 - HB90 - MS - LI

2 Side Rail Height2 = 2”3 = 3”4 = 4”5 = 5”6 = 6”7 = 7”

3 Material/FinishHG Hot Dipped GalvanizedS6 316 Stainless Steel

5 Radius12 = 12”24 = 24”

6 Fitting TypeHB Horizontal Bend - 30° 45° 60° 90°VO Vertical Outside - 30° 45° 60° 90°VI Vertical Inside - 30° 45° 60° 90°

HT Horizontal TeeHC Horizontal CrossSR Straight ReducersRR Right Hand ReducersLR Left Hand Reducers

2 3 4 5 6 7 8

8 Side Rail TypeLI Leg In C-Rail

7 Rung TypeMS Marine Slotted


1

4 Width06 = 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”

- 50 -




Catalog NumberSeries* Width (in.) Bottom Style Radius (in.) Fitting Type Dimensions A (in.)

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

H90H90

H90H90

H90H90

H90H90

H90H90

H90H90

H90H90

18.030.0

19.531.5

21.033.0

24.036.0

27.039.0

30.042.0

33.045.0

90 Degree Horizontal BendExample Part No.: O1-4HG-12L12-HB90-MS-LI


- 51 -


Catalog NumberSeries* Width Bottom Radius Fitting Dimensions (inches)

(inches) Style (inches) Type A B C

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

H60H60

H60H60

H60H60

H60H60

H60H60

H60H60

H60H60

17.527.9

18.829.2

20.130.5

22.733.1

25.335.7

27.938.2

30.540.9

10.116.1

10.916.9

11.617.6

13.119.1

14.620.6

16.122.1

17.623.6

11.718.6

12.519.4

13.420.3

15.122.1

16.923.8

18.625.5

20.327.2


- 52 -






(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

H45H45

H45H45

H45H45

H45H45

H45H45

H45H45

H45H45

15.824.2

16.825.2

17.926.3

20.028.4

22.130.6

24.232.7

26.334.8

6.510.0

6.910.5

7.410.9

8.211.8

9.112.7

10.013.6

10.914.4

9.214.2

9.814.8

10.415.4

11.716.7

12.917.9

14.219.1

15.420.4



- 53 -




(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

H30H30

H30H30

H30H30

H30H30

H30H30

H30H30

H30H30

13.119.1

13.919.9

14.620.6

16.122.1

17.623.6

19.125.1

20.626.6

3.55.1

3.75.3

3.95.5

4.35.9

4.76.3

5.16.8

5.57.1

7.010.2

7.410.6

7.811.1

8.611.8

9.412.6

10.213.4

11.114.2


- 54 -




Catalog NumberSeries* Width Bottom Radius Fitting Siderail Height (inches)

(inches) Style (inches) Type 4”-A -B 5”-A -B 6”-A -B 7”-A -B

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

19.231.2

19.231.2

19.231.2

19.231.2

19.231.2

19.231.2

19.231.2

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

20.232.2

20.232.2

20.232.2

20.232.2

20.232.2

20.232.2

20.232.2

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

21.233.2

21.233.2

21.233.2

21.233.2

21.233.2

21.233.2

21.233.2

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

22.234.2

22.234.2

22.234.2

22.234.2

22.234.2

22.234.2

22.234.2

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

15.027.0

90 Degree Vertical Inside & OutsideExample Part No.: O1-4HG-24L12-VI90-MS-LI

O1-4HG-24L12-VO90-MS-LI


- 55 -


Catalog NumberSeries* Width Bottom Radius Fitting

(inches) Style (inches) Type

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

42

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

1224

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

10.716.7

10.716.7

10.716.7

10.716.7

10.716.7

10.716.7

10.716.7

10.716.7

18.528.9

18.528.9

18.528.9

18.528.9

18.528.9

18.528.9

18.528.9

18.528.9

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

11.217.2

11.217.2

11.217.2

11.217.2

11.217.2

11.217.2

11.217.2

11.217.2

19.429.8

19.429.8

19.429.8

19.429.8

19.429.8

19.429.8

19.429.8

19.429.8

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

11.717.7

11.717.7

11.717.7

11.717.7

11.717.7

11.717.7

11.717.7

11.717.7

20.330.6

20.330.6

20.330.6

20.330.6

20.330.6

20.330.6

20.330.6

20.330.6

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

12.218.2

12.218.2

12.218.2

12.218.2

12.218.2

12.218.2

12.218.2

12.218.2

21.131.5

21.131.5

21.131.5

21.131.5

21.131.5

21.131.5

21.131.5

21.131.5

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

14.925.3

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

8.614.6

Siderail Height (inches)4”-A -B -C -D 5”-A -B -C -D 6”-A -B -C -D 7”-A -B -C -D



- 56 -






(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

6.910.4

6.910.4

6.910.4

6.910.4

6.910.4

6.910.4

6.910.4

16.625.1

16.625.1

16.625.1

16.625.1

16.625.1

16.625.1

16.625.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

7.210.7

7.210.7

7.210.7

7.210.7

7.210.7

7.210.7

7.210.7

17.325.8

17.325.8

17.325.8

17.325.8

17.325.8

17.325.8

17.325.8

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

7.411.0

7.411.0

7.411.0

7.411.0

7.411.0

7.411.0

7.411.0

18.026.5

18.026.5

18.026.5

18.026.5

18.026.5

18.026.5

18.026.5

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

7.711.3

7.711.3

7.711.3

7.711.3

7.711.3

7.711.3

7.711.3

18.627.2

18.627.2

18.627.2

18.627.2

18.627.2

18.627.2

18.627.2

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

13.622.1

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2

5.69.2





- 57 -




(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

(∆)90(∆)90

3.75.3

3.75.3

3.75.3

3.75.3

3.75.3

3.75.3

3.75.3

13.719.7

13.719.7

13.719.7

13.719.7

13.719.7

13.719.7

13.719.7

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.85.4

3.85.4

3.85.4

3.85.4

3.85.4

3.85.4

3.85.4

14.220.2

14.220.2

14.220.2

14.220.2

14.220.2

14.220.2

14.220.2

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.95.5

3.95.5

3.95.5

3.95.5

3.95.5

3.95.5

3.95.5

14.720.7

14.720.7

14.720.7

14.720.7

14.720.7

14.720.7

14.720.7

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

4.15.7

4.15.7

4.15.7

4.15.7

4.15.7

4.15.7

4.15.7

15.221.2

15.221.2

15.221.2

15.221.2

15.221.2

15.221.2

15.221.2

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

11.617.6

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7

3.14.7




- 58 -




(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

18.030.0

19.531.5

21.033.0

24.036.0

27.039.0

30.042.0

33.045.0


(inches) Style (inches) Type A B

36.060.0

39.063.0

42.066.0

48.072.0

54.078.0

60.084.0

66.090.0

Horizontal Equal TeeExample Part No.: O1-4HG-12/12L12-HT-MS-LI


- 59 -


(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

(Series)*

6

9

12

18

24

30

36

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

(‡)

1224

1224

1224

1224

1224

1224

1224

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

(∆)(∆)

18.030.0

19.531.5

21.033.0

24.036.0

27.039.0

30.042.0

33.045.0


(inches) Style (inches) Type A B

36.060.0

39.063.0

42.066.0

48.072.0

54.078.0

60.084.0

66.090.0

Horizontal Equal CrossExample Part No.: O1-4HG-12/12L12-HC-MS-LI

- 60 -




Horizontal Reducers - LeftExample Part No.: O1-4HG-24/12-LR-MS-LI


- 61 -


Horizontal Reducers - RightExample Part No.: O1-4HG-24/12-RR-MS-LI

- 62 -




Horizontal Reducers - StraightExample Part No.: O1-4HG-24/12-SR-MS-LI


- 63 -


C-Rail Splice Plate Part Numbering SystemExample Part No.: O1-H4SC-C

O1-H 4 SC - C

3 Side Rail Height4 = 4”5 = 5”6 = 6”7 = 7”

2 Material/FinishH Hot Dipped Galvanized

S6 316 Stainless Steel

2 3 4 5

5 Side Rail TypeC C-Rail


1

4 Accessory TypeSC Splice Connector

Note:1. Sold in pairs2. Includes Hardware

- 64 -




C-Rail Horizontal Adjustable Splice Plate Part Numbering SystemExample Part No.: O1-H4HAC-C

O1-H 4 HAC - C

3 Side Rail Height4 = 4”5 = 5”6 = 6”7 = 7”

2 Material/FinishP Pre-GalvanizedH Hot Dipped Galvanized


2 3 4 5



1

4 Accessory TypeHAC Horizontal Adjustable Connector



- 65 -


C-Rail Vertical Adjustable Splice Plate Part Numbering SystemExample Part No.: O1-H4VAC-C

O1-H 4 VAC - C

3 Side Rail Height4 = 4”5 = 5”6 = 6”7 = 7”

2 Material/FinishP Pre-GalvanizedH Hot Dipped Galvanized


2 3 4 5



1

4 Accessory TypeVAC Vertical Adjustable Connector


- 66 -




9/32

1 1/2

3/4

25/64

2 3/16

7/8 1

1/2

C-Rail Hold Down Clamp Part Numbering SystemExample Part No.: O1-SHDC

O1-S HDC -

2 Material/FinishP Pre-GalvanizedS 316 Stainless Steel

2 3 4

4 KitKT Kit(Add KT for kit which includes 3/8” hardware; flat washer, spring nut & hex bolt)


1

3 Accessory TypeHDC Hold Down Clamp

Note:1. Sold each

LIMITED WARRANTY; LIMITATION OF LIABILITY

OCEAN-1 WARRANTS THAT THE PRODUCTS TO BE SUPPLIED HEREUNDER ARE MANUFACTURED IN ACCORDANCE WITH MANUFACTUR-ER’S APPLICABLE MATERIAL SPECIFICATIONS AND ARE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP USING MANUFACTUR-ER’S SPECIFICATIONS AS A STANDARD. ONLY SUCH PRODUCTS INSTALLED AND USED IN ACCORDANCE WITH APPLICABLE MANUFAC-TURER’S INSTRUCTIONS AND SPECIFICATIONS ARE IN ANY WAY WARRANTED BY OCEAN-1 OR MANUFACTURER. ALL OTHER CLAIMS AREWAIVED. THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY AND WARRANTY FROM OCEAN-1 AND THE MANUFACTURER. CUSTOMERAGREES NOT TO LOOK TO OCEAN-1 FOR ANY REMEDY IN CONNECTION WITH PRODUCTS NOT MANUFACTURED BY OCEAN-1, PROVIDEDTHAT OCEAN-1 HEREBY ASSIGNS TO CUSTOMER ALL MANUFACTURER’S WARRANTIES WITH RESPECT TO SUCH PRODUCTS, TO THEEXTENT ASSIGNABLE. THE PRODUCTS TO BE SUPPLIED HEREUNDER ARE NOT SOLD WITH ANY WARRANTIES, EXPRESS OR IMPLIED,INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHICH IMPLIED WAR-RANTIES ARE SPECIFICALLY DISCLAIMED. THIS LIMITED WARRANTY IS CUSTOMER'S SOLE AND EXCLUSIVE REMEDY. IT IS EXPRESSLYUNDERSTOOD AND AGREED THAT THE LIMIT OF OCEAN-1’S LIABILITY WITH RESPECT TO PRODUCTS SUPPLIED BY OCEAN-1 WILL BE, ATOCEAN-1’S OPTION, REPAIR OF THE DEFECTIVE PRODUCT OR RE-SUPPLY OF A LIKE QUANTITY OF NON-DEFECTIVE PRODUCT, AND SUP-PLIER SHALL NOT BE LIABLE FOR ANY DAMAGES WHICH ARE BASED UPON ALLEGED NEGLIGENCE, BREACH OF WARRANTY, STRICT LIA-BILITY OR ANY OTHER THEORY OTHER THAN THE LIMITED WARRANTY SET FORTH ABOVE. CUSTOMER WILL BE RESPONSIBLE FOR ALLLABOR AND SERVICE CHARGES THAT MAY BE INCURRED WITH RESPECT TO EITHER THE ORIGINAL OR REPLACEMENT PRODUCT. IN NOEVENT WILL OCEAN-1 OR MANUFACTURER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.


C-RAIL LADDER TRAY SYSTEM · Flatbar Ladder Tray C-Rail Leg-In Ladder Tray I-Beam Ladder Tray...

Documents

Transcript of C-RAIL LADDER TRAY SYSTEM · Flatbar Ladder Tray C-Rail Leg-In Ladder Tray I-Beam Ladder Tray...