N E W G E N E R A T I O N 1 8 . 0 V - 2 . 0 A h L i - I o n

C e m b r e “b i l i n e a r ” C o r d l e s s h y d r a u l i C C r i m p i n g a n d C u t t i n g t o o l

B540nd

Operating features:• Bilinear mechanical design• Smart Release system which automatically retracts the ram at the end of the operating cycle• OLED multifunctional display with touch button• Electronic Pressure Sensor (EPS)• SMARTOOL technology for viewing and downloading operational data• 180° rotating head• Start button protected against accidental operation• Manual pressure release button • Illumination of working area via 4 x LED lights• Bi-component plastic body• Ergonomic design for operator comfort • Li-Ion 18.0 V-2Ah rechargeable high capacity battery • Battery connection system with release button

The OLED display provides essential real time operating data, including:- generated crimping force, thus veri-

fying accordance with best practice - battery charge status - general operating information- the number of work cycles completed

and remaining before recommended maintenance.

Weight and balance have been recon-figured to improve handling and ease of use. The more rigid structure of the bi-com-ponent plastic body provides greater mechanical protection while the rub-ber inserts boost operator safety and comfort.Quieter operation, illumination of the working area via LED lights, and mini-mal vibration improve tool practicality.

B540nd is the first of a new gen-eration of hand-held cordless tools, characterised by a “Bilinear” me-chanical design. Equipped with a Smart Release sys-tem which automatically retracts the ram at the end of the operating cycle.

Equipped with Li-Ion 18 V-2Ah re-chargeable high capacity batteries. Jaws rotate by 180° for ease of opera-tion in confined spaces.

Fitted with a maximum pressure sensor for enhanced precision and repeatabili-ty of the maximum pressure cycle, and a pressure relief valve providing addi-tional safety for the operator.

The Electronic Pressure Sensor (EPS) guarantees the precision of the crimp-ing operation, checking the actual value of pressure and informing the operator about possible errors.

The integrated memory card enables the user to store data from up to 200,000 compression cycles for transfer to a computer via a USB cable. (SMARTOOL technology).

B540nd is the professional tool ideal for OH lines and resi-dential service applications.

N e w g e N e r a t i o N o f C e m b r e “ B i l i n e a r ” C o r d l e s s t o o l s

4 LED lighting of the working area Manual pressure release button OLED multifunctional displayBattery connection system

The tool electronics constantly monitors battery performance, verifying temperature / voltage /

Optimised battery life

current to prevent accidental dam-age and maximize its duration of charge.

Similar tools with ‘standard’ au-tomatic return do not permit this visual verification that full com-pression has taken place before releasing pressure.

Electronic Pressure Sensor The EPS guarantees the precision of the crimping operation, checking the actual value of pressure and informing the operator of possible errors.

Smart Release Technology “Smart Release Technology” is a new development by Cembre whereby an intelligent oil pressure release system stops the motor at the end of the crimping cycle.

Automatic retraction of the ram only occurs when the operator re-leases the start button, this allows visual verification of the jaws to en-sure that they have fully met prior to releasing.

N e w “ B i l i n e a r ” c o r d l e s s h y d r a u l i c t o o l nd s e r i e s

Data recording and intelligent control allow complete verifi-cation of operational peram-eters SMARTOOL technology enables the user to to store data from up to 200,000 cycles on the integrated

“Bilinear” StructureOperator comfort and conveni-ence are key factors in producing repeatedly consistent high integ-rity crimped joints. Cembre ‘nd’ bilinear tools have their mechanical centre of gravity nearest to the operator’s wrist to optimise the overall ergonomics of the tool and provide a wider support for the hand. Thus the innovative misalignment between the pump drive mech-anism and the hydraulic system both reduce the torque generated on the operator’s wrist and best distribute the stresses acting on the hand.

memory card for transfer to a com-puter via a USB cable

T e c h n i c a l i n n o v a t i o n e n h a n c e s e r g o n o m i c f e a t u r e s

I n n o v a t i o n f i r s t a n d f o r e m o s t , i t ’ s i n o u r D N A .

INTERCHANGEABLE CRIMPING AND CUTTING JAWSCAT. No GROOVES CRIMPING DIE COMPATIBILITY

CDD6N “D3” TO ACCEPT ALL “W” STYLE CRIMPING DIES + “BG” FIXED GROOVE

Cembre MUT..-W Series

FCI Burndy W, X Series

CDD6-6N “D3” TO ACCEPT ALL “W” STYLE CRIMPING DIES Cembre MUT..-W Series

FCI Burndy W, X Series

CDD6-8N “D3” TO ACCEPT ALL “W” STYLE CRIMPING DIES + “O” FIXED GROOVE

Cembre MUT..-W Series

FCI Burndy W, X Series

CMB4N Cutting jaws for underground: Aluminum & Copper stranded cables. Max opening 32 mm

CMB5N Cutting jaws for OHL: up to 200 mm² ACSR and BLX cable

CMB6N Cutting jaws for guy wires: Up to Ø 10 mm galvanised steel wire (<1250N/mm2)

CDD6N jaws*

With “D3” groove to accept all “W” style crimping dies + “BG” fixed groove.

* supplied as standard with the B540NDE and B540ND-BVE

CDD6-8N jaws

With “D3” groove to accept all “W” style crimping dies + “O” fixed groove.

CDD6-6N jaws

With “D3” groove to accept all “W” style crimping dies.

Interchangeable Jaws A wide range of interchangeable crimping and cut-ting jaws are available upon request.

CMB4N jaws

Cutting jaws for underground Aluminum & Copper stranded cables.Max opening 32 mm

CMB6N jaws

Cutting jaws for guy wires: up to Ø 10 mm galvanised steel wire (<1250N/mm2)

CMB5N jaws

Cutting jaws for OHL: up to 200 mm² ACSR and BLX cable

General features:

TypeCrimping

forcekN

MAIN OHL APPLICATIONS (max. cross sectional area, mm2) Dimensions mm (with CDD6N)BatteryLi-Ion

Weight kg(with Batteryand CDD6N)

STORAGE

Hard Drawn Copper lugs and splices

Aluminum lugsand splices

Aluminum C sleeves length height width Type Dimensions

mmWeight

kgSupplied

with the tool

B540NDE54 70 mm²

100 mm² AAC50 mm² AAAC50 mm² ACSR

100 mm² - 100 mm² 495 145 88 18 V - 2 Ah 3,4 Canvas Bag 033 740x215x200 1,8 B540ND-BVE

B540nd

Supplied with:• CB1820L, Li-Ion 18.0 V 2.0 A h Battery (2 pcs)• ASC30-36, Battery charger (INPUT 220-240 V / 50-60 Hz; OUTPUT 12-42 V DC / 3.0 A MAX.)• USB cable • Shoulder strap • Canvas Bag

CB1820L, Li-Ion 18.0 V 2.0 Ah High Capacity Battery:• Provides 100 % of its energy between -15 and +50°C• Electronic control of the individual cells to avoid under or overcharging• AIR COOLED ventilated charging technology for a longer life and shorter recharge time• Timed auto off switch to optimise energy consumption

www.cembre.com

Cod.

6260

780

Any other country, please contact Cembre S.p.A. - Italy

New

Also available:

B540ND-BVE (basic version tool)• 18V tool supplied with a 18V 2.0Ah battery (1 piece sup-

plied with the tool), battery charger, USB cable, shoulder strap and canvas bag

• Maximum pressure valve (instead of the EPS)• Features the new ‘Bilinear’ mechanical design offering sig-

nificant improvements over the previous range of in-line tools

• Does not have an OLED display, however does alert the operator via flashing LED’s and audible beeps when main-tenance is recommended

• Operating data (no. of operations) can be transferred via USB

Also available:

CB1840L , Li-Ion 18.0 V 4.0 Ah High Capacity Battery (purchased separately)

Cembre Ltd.Tel.: +44 01675 470440 Fax: +44 01675 470220www.cembre.co.ukE-mail: sales@cembre.co.uk

Cembre S.p.A.Telefono: +39 030 36921Telefax: +39 030 3365766www.cembre.itE-mail: sales@cembre.com

Cembre S.a.r.l.Tél.: +33 01 60 49 11 90 Fax: +33 01 60 49 29 10www.cembre.frE-mail: info@cembre.fr

Cembre España S.L.U.Teléfono: +34 91 4852580 Telefax: +34 91 4852581www.cembre.esE-mail: comercial@cembre.es

Cembre GmbHTelefon: +49 089 3580676Telefax: +49 089 35806777www.cembre.deE-mail: sales@cembre.de

Cembre Inc.Tel.: +1 732 225-7415Fax: +1 732 225-7414www.cembreinc.comE-mail: Sales.US@cembreinc.com

IKUMA GmbH & Co. KGTelefon: +49 7151 20536 - 60Telefax: +49 7151 20536 - 80E-mail: info@ikuma.dewww.ikuma.de