BVCM016409 Business mentor madri+d (english version) · the madri+d Mentoring Network, who have...
Transcript of BVCM016409 Business mentor madri+d (english version) · the madri+d Mentoring Network, who have...
certification guide
Quality mentoring for entrepreneurs and startups
Direción General de Investigación e InnovaciónCONSEJERÍA DE EDUCACIÓN
E INVESTIGACIÓN
Direción General de Investigación e InnovaciónCONSEJERÍA DE EDUCACIÓN
E INVESTIGACIÓN
certification guide
Quality mentoring for entrepreneurs and startups
Councillor of Education, Youth and SportRafael van Grieken Salvador
General Manager of Research and InnovationAlejandro Arranz Calvo
Deputy General Manager of ResearchRafael García Muñoz
FUNDACIÓN PARA EL CONOCIMIENTO madri+d
DirectorJesús Sánchez Martos
Coordinator of the Research, Development and Innovation AreaJosé de la Sota Ríus
Editorial CoordinationEduardo Díaz SánchezIgnacio Cid PlazaAuthors: Eduardo Díaz Sánchez Ana Mª Aceituno AlcaláRosa Allegue MurciaRoberto Espinosa BlancoJavier Criado NesofskiJulio Fernández-Gayoso MedieroRafael García del PoyoPedro Guerra GutiérrezJulio Marco BarrosoTomás Otero PinoHermógenes del Real Álvarez
© Community of MadridPublished by: Directorate-General for Research and Innovation of the Education and Research BoardFundación para el Conocimiento madri+dPaseo de Recoletos, 14 – 7ª planta. 28014 [email protected] / [email protected]
Production design: FRAGMA, S.L.Edition: 09/2018ISBN: 978-84-451-3740-6Medium: Online publication in PDF formatPublicado en España - Published in Spain
índiceIntroduction ....................................................................................................... 10
About the authors ............................................................................................. 13
module 1
Content and structure of the guide. Tools. . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Content and structure of the guide. Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
1.1. Key aspects of the mentoring for entrepreneurs process . . . . . . . . . 23
1.2. Key aspects of startup management and life cycle . . . . . . . . . . . . . . . . 23
1.3. Communication and mentoring relationship management skills . 24
module 2
Mentoring for entrepreneurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.2. Mentoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.3. Mentoring for entrepreneurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.3.1. Basic requirements of mentoring for entrepreneurs. . . . . . . . . . . . . 30
2.3.2. The mentoring agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.4. The mentoring process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.4.1. Process I: Incorporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2.4.2. Process II: Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.4.3. Process III: Development of the relationship . . . . . . . . . . . . . . . . . . . . 33
2.4.4. Process IV: Closing and evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.5. Critical aspects of mentoring for entrepreneurs . . . . . . . . . . . . . . . . . . . . 35
2.6. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
module 3
12+1 sales and startup myths. Sales techniques . . . . . . . . . . . . . . . . 37
3.1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.2. Sales and startup myths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.3. Brief introduction to sales methodologies for mentors. . . . . . . . . . . . . 41
3.4. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5 / 221
contents
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
certification guidebusiness mentor madri+d
5
module 4
Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.2. Introduction to the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.3. What is a commercial mentor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.4. What does commercial mentoring consist of? . . . . . . . . . . . . . . . . . . . . . . 51
4.5. The relationship between mentor and mentee in the commercial function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.6. What should a good commercial mentor do well? . . . . . . . . . . . . . . . . . 57
4.7. The mentor’s role in the identification and attraction of talent . . . . 57
4.8. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
module 5
Financial structure of a startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5.2. Introduction to the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5.3. Definition of the financial function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
5.4. Accounting: concept and classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
5.5. Basic axioms of accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
5.6. Accounting documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
5.6.1. Basic accounting documents: Balance Sheet,
Income Statement and Statement of Cash Flows . . . . . . . . . . . . . . 67
5.6.2. Financial Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
5.6.3. The Accounting Books (General Ledger and Journal) . . . . . . . . . . 72
5.7. Business cycles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
5.8. Financial ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
5.8.1. Profitability vs Liquidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
5.8.2. Economic profitability. ROI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
5.8.3. The average Payment/Collection period . . . . . . . . . . . . . . . . . . . . . . . . 75
5.9. Risk management, insurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
5.10. Taxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
5.11. Due diligence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
5.12. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
6 / 221
contents
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
certification guidebusiness mentor madri+d
6
module 6
Development of the business model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
6.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
6.1.1. Conceptualisation process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
6.1.2. Analysis of the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
6.1.3. Customer analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
6.1.4. Designing a solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
6.1.5. Designing the model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
6.1.6. Business analysis based on its model . . . . . . . . . . . . . . . . . . . . . . . . . . 104
6.2. Key questions for the mentor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
6.3. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
module 7
Mentoring for internationalising a startup . . . . . . . . . . . . . . . . . . . . . . . . . 111
7.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
7.2. Question 1: why and for what reason(s) should I internationalise the company? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
7.3. Should I internationalise the company? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
7.4. Should I internationalise the company? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
7.5. Question 4: How should I internationalise the company? . . . . . . . . . 120
7.5.1. Types of internationalisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
7.5.2. Market entry models - Go To Market (GTM) . . . . . . . . . . . . . . . . . . . . 123
7.5.3. Focus marketing efforts on a segment/industry or solution:
The “Crossing the Chasm” model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
7.5.4. Organisational culture and leadership styles in
internationalisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
7.5.5. Remote team and project management . . . . . . . . . . . . . . . . . . . . . . . . 132
7.6. Possible internationalisation-related scenarios in a startup - reflections for mentoring processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
7.7. Key questions for the mentor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
7.8. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
module 8
Investment in the startup development stages . . . . . . . . . . . . . . . . . . 139
8.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
8.2. Introduction to the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
8.3. Investor suitability and mentoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
8.4. Development stages of the company and its investment. . . . . . . . . . 142
8.5. Mentoring and support for obtaining investment . . . . . . . . . . . . . . . . . . . 143
8.6. Generation of the idea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
7 / 221
contents
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
certification guidebusiness mentor madri+d
7
8.6.1. The idea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
8.6.2. Market research . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
8.6.3. Analysis of the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
8.6.4. The entrepreneur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
8.6.5. Assessment of the Business Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
8.7. Marketing stage: investment prior to launch . . . . . . . . . . . . . . . . . . . . . . . . 148
8.7.1. Validation of the customer/problem hypothesis . . . . . . . . . . . . . . . . . 149
8.7.2. Market validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
8.7.3. Viability of the business: Validation of the Business Model . . . . . 150
8.8. Execution stage. Launch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
8.8.1. Functional areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
8.8.2. Final considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
8.9. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
module 9
Basic legal concepts for mentoring for technology-based entrepreneurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
9.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
9.2. Basic legal concepts for mentors of technology-based entrepreneurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
9.2.1. General considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
9.2.2. The business decision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
9.2.3. The letter of intent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
9.2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
9.2.5. Authorisations and/or administrative licences . . . . . . . . . . . . . . . . . . 170
9.2.6. Taxation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
9.2.7. New technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
9.2.8. Intellectual Property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
9.2.9. Domain names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
9.2.10. Data protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
9.2.11. Electronic Commerce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
9.2.12. Online payment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
9.2.13. Electronic invoicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
9.2.14. Taxation and e-commerce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
9.2.15. Concept of permanent establishment . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
9.3. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
module 10
Mentoring for entrepreneurs and coaching. Process, stages, skills and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
10.1. Module goals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
10.2. Introduction to coaching for mentors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
10.3. The stages of the coaching process: the “grow” model . . . . . . . . . . . 184
8 / 221
contents
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
certification guidebusiness mentor madri+d
8
10.4. Analysis of the key elements and tools used in a coaching process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
10.4.1. How to build trust: context and rapport . . . . . . . . . . . . . . . . . . . . . . . . . 186
10.4.2. We listen but We do not hear: active and empathetic listening . 189
10.4.3. The art of asking: “powerful questions” . . . . . . . . . . . . . . . . . . . . . . . . . 191
10.4.4. Incite to action: the importance of doing . . . . . . . . . . . . . . . . . . . . . . . . 193
10.5. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
module 11
Team management and coaching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
11.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
11.2. Team management and coaching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
11.2.1. Leadership styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
11.2.2. Johari Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
11.2.3. Team diagnosis - TDA (Team Diagnostic Assessment) . . . . . . . . . 202
11.2.4. Belbin’s Roles Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
module 12
Communication to stakeholders 4.0, a key component for the success of a business project . . . . . . 209
12.1. Teaching goals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
12.2. Communication 4.0: Strategic tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
12.3. Resources for deepening knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
introduction
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
10 / 221
introduction10
certification guidebusiness mentor madri+d
IntroductionStartups play a very important role in our societies, both in terms of creation of
employment and in the construction of the new economy. In particular, technology
startups are spearheading the development of innovations linked to new products
and services, with significantly higher percentages of number of patents and number
of skilled workers per employee than those recorded in large companies, as shown
in the NTBC series of studies carried out by Fundación madri+d since 2004.
One of the main needs of startups is access to qualified contact networks that allow
them to make decisions and launch initiatives with greater chances of success. Larger
companies have resources and experience that allow them to develop business con-
nections that will support their activity. However, these networks are not accessible to
entrepreneurs, even in the acquisition stage of new technical and business knowledge
and the development of new management skills.
Since 2006, the madri+d Mentoring Network has provided these contacts to the
technology startups of the Community of Madrid through mentoring and with remar-
kable success. Through the “business mentor madri+d” certification, Fundación para
el Conocimiento madri+d wishes to place its extensive experience at the disposal of
other international programmes and networks, and this guide constitutes an essential
learning element in the certification process.
For entrepreneurs, having the opportunity to find answers to their questions can mark
the difference between avoiding significant mistakes or not and, ultimately, between
managing their startup more effectively and with better results or not. Mentors, who
are often people who have experienced similar situations or have experienced those
of others very closely, can contribute to entrepreneurs’ success by helping and guiding
them and sharing their passion as the company grows, endeavouring to not forget
or underestimate important aspects. Mentors can provide contacts or knowledge of
business management, professional or personal skills that can be vital at any given
point of the startup life cycle.
This guide is composed of easy read training modules which include numerous
relevant techniques and tools, both for mentors and for entrepreneur programme
managers. These contacts address the lack of publications on how to adequately
approach mentoring relationships in the early stages of a business, when it is essen-
tial to facilitate the necessary environment for mentors and entrepreneurs to work
together effectively.
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
11 / 221
introduction11
certification guidebusiness mentor madri+d
The contents of the guide have been developed by an outstanding group of mentors of
the madri+d Mentoring Network, who have distilled part of their personal experience to
help others, both consolidated mentors and those aiming to become mentors but do
not have the necessary knowledge or skills. At Fundación madri+d we are especially
grateful for their collaboration.
Lastly, we also expect this guide to help entrepreneur programme managers to identify
mentoring good practices and implement a proven, quality work method such as that
of the Mentoring Network of Fundación madri+d.
Los contenidos de la guía han sido desarrollados por un destacado grupo de men-
tores de la Red de mentores de madri+d, que han destilado parte de su experiencia
personal para ayudar a otras personas, tanto si ya son mentores eficaces como si
desean ser mentores y no tienen los conocimientos o habilidades necesarios. Desde
la Fundación madri+d agradecemos especialmente su colaboración.
Por último, también esperamos que esta guía ayude a los gestores de programas
de emprendedores a identificar buenas prácticas de mentoring y a poner en práctica
una metodología de trabajo probada y de calidad, como es la de la Red de Mentores
de la Fundación madri+d.
about the authors
13 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
13
certification guidebusiness mentor madri+d
About the authors
Eduardo Díaz SánchezEditorial Coordinator. Director of the Technology-Based Entrepreneurs Area of Fundación
madri+d. European Commission Business Coaching KAM.
Director since 2004 of the Technology-Based Entrepreneurs Area of Fundación para
el Conocimiento madri+d, which promotes the creation and consolidation of compa-
nies based on scientific-technological knowledge through programmes such as the
madri+d Mentoring Network. He has a degree in Physics and a MBA from Instituto
de Empresa, and is a technology, entrepreneurship and business innovation expert.
Eduardo Díaz has led more than 50 projects and networks in the sphere of technology
management and transfer, sectoral innovation policies and the exploitation, dissemi-
nation and marketing of research results. He occupied the post of strategic consulting
manager at SOCINTEC, Corporación IBV, head of international defence electronics
project management at INDRA, software engineer and lecturer at Universidad Carlos
III of Madrid.
In his current role he mobilises resources, access to innovative programmes and
private funding through: mentoring for entrepreneurs through the madri+d Mentoring
Network; incubation of startups based on space technology (ESA BIC Community of
Madrid), in healthcare technologies (Healthstart), clean technologies (Cleantechstart)
and intersectorality (InnoSmart); the search for private funding through the Business
Angels BAN madri+d network; and the dissemination and support for entrepreneurial
networking with university, scientific and business institutions.
As a university lecturer, to date he has published over 100 articles and studies rela-
ted to innovation and technology-based entrepreneurship included the NTBC (New
Technology-Based Companies) series of studies performed by Fundación madri+d.
Blog: www.madrimasd.org/blogs/emprendedores
Linkedin: https://www.linkedin.com/in/ediaz1/es
Ana Mª Aceituno AlcaláHuman Quality Coach. Director of Anathenea.
Mentor of the madri+d Mentoring Network, Ana Mª Aceituno is a human quality coach and
currently runs her own professional training and coaching activity, under the trade name
Anathenea, to empower people and organisations with a firm commitment to growth.
She is a lecturer, advisor and instructor with extensive experience in Spain and abroad
(LATAM) at prestigious universities, business schools, business circles and the Tertiary
Sector.
14 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
14
certification guidebusiness mentor madri+d
She is an executive coach certified by AECOP and a Business Mentor certified by
Fundación para el Conocimiento Madri+d and has over 25 years’ of professional expe-
rience. Most of this time has been spent occupying executive roles in corporate mar-
keting and protocol at companies such as Ferrovial, Broadnet Consorcio and Sacyr.
She is a regular collaborator of the enComunicación -EsRadio Valencia FM- radio
programme in the “Inspiration Pills” and “Coaching for you” sections.
She is a member of IBW (International Business Women), LIDERA network, AECOP
(Spanish Executive Coaching Association), DIRCOM (Association of Communication
Executives) and AEP (Spanish Protocol Association).
She has a degree in Computer Science. She has a Master’s Degree in Marketing
Management and a University Expert Course in Protocol and Ceremony.
She has specific Executive Coaching training delivered by Dr. Mario Alonso Puig and
Leonardo Wolk, in addition to knowledge of Multiple Intelligences and Neuroscience
applied to training and coaching.
Blog www.anaaceituno.com
Linkedin: www.linkedin.com/in/anathenea/
Rosa Allegue MurciaCFO of Skechers Iberia.
A mentor of the madri+d Mentoring Network, Rosa Allegue specialises in finance,
HR, implementation of ERPs, risk management and mentoring for entrepreneurs and
executives.
Rosa Allegue is CFO of Skechers Iberia, a world leader of the footwear industry. She
is Co-founder and Treasurer of EJE&CON, the Spanish Association of Women Exe-
cutives and Board Members.
She has over 25 years’ professional experience as finance and HR director, and has
formed part of the Management Committee in multinational companies for the last
15 years.
She specialises in startups, implementation of ERPs, credit and expansion mana-
gement in retail and franchises. She collaborates with universities, giving lectures to
transmit her entrepreneurial vision to the academic world. She is a speaker in Onda
Inversión, forms part of the Experts Platform and is an experienced mentor of the
madri+d Mentoring Network.
She won the “One of the 100 best financiers” prize in 2015 and 2016 in Spain, awar-
ded by Actualidad Económica magazine.
Linkedin: https://www.linkedin.com/in/rosaalleguecfo/?locale=es_ES
15 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
15
certification guidebusiness mentor madri+d
Javier Criado NesofskyCompany, team and people growth driver. European Commission Business Coach.
A mentor of the madri+d Mentoring Network, Javier Criado Nesofsky is a company,
team and people growth driver. He has nearly 30 years’ experience in different sec-
tors, including consulting, industry, energy, stock markets, venture capital, real estate,
Internet and software development companies. He has worked as a senior manager
in the areas of finance, strategy and business development.
Javier has a Bachelor’s Degree in Business, field of Economics and International
Business, from the Richard A. Chaifetz School of Business of San Louis University
(Missouri), graduated magna cum laude, and an MBA from the Kellogg Graduate
School of Management (Chicago), Specialising in Finances, Marketing, Strategy and
Organisation. He also has a Master’s Degree in Executive Coaching from the European
School of Coaching, a programme certified by the International Coach Federation.
Since 2014 he works as an “innovation business coach” for the Union Europe, advi-
sing companies traversing a high-growth stage that receive EU funding through the
SME Instrument programme. Since 2016 he is a founding member of Capital 2, a
company specialising in real estate transactions for the services sector. His main
areas of interest are companies related to the circular economy, energy, software and
innovative business models.
Linkedin: https://www.linkedin.com/in/javier-criado-nesofsky-237862
Roberto Espinosa BlancoManaging Partner Madrid for Lead to Change. European Commission Business Coach.
A mentor of the madri+d Mentoring Network, Roberto Espinosa is an economist who
is passionate about technology and business management. He occupied various
EMEA-level management positions at Intel Corporation for more than 15 years. Sub-
sequently, he engaged in innovation consulting as Managing Partner of LTC Madrid,
a strategic innovation consulting firm specialising in Open Innovation.
Roberto Espinosa is passionate about the entrepreneurial movement in Spain and
has collaborated with different entrepreneurship support programmes in recent years.
He is a partner at various accelerators and has participated in different projects as
promoter. He is a SME Innovation Coach under the EASME (Executive Agency for
SMEs) programme to support innovative SMEs in the European Union. He is also a
TechStarts (Community of Madrid) and in EuroStars (European Commission) experts,
in addition to providing advisory services to various startups.
He is a collaborator at several business schools, mainly Deusto Business School,
where he is also a project tutor for Cybersecurity and Public Innovation Executives
Programmes, as well as Academic Director of In-Company Training Programmes.
16 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
16
certification guidebusiness mentor madri+d
He is also an occasional writer and, in addition to his own blog (resbla.com), regularly
collaborates with others. Several of his articles have been selected by the Spanish
Marketing Association as best of the month, and the World Economic Forum has also
selected some of his articles for its Spanish website. He has also written a chapter for
the book “Never trust an economist who does not hesitate” (Deusto, 2015). He is a
regular collaborator of Capital Radio as a technology and innovation expert.
Another of his passions is public speaking and communication, which is one of the
reasons why he organises TEDxSantAntoni and TEDXUDeustoMadrid, where he is
in charge of supervising content and working with speakers in order to convey ideas
worth sharing in the best possible manner.
He is a regular innovation, technology and business speaker.
Linkedin: https://www.linkedin.com/in/robertoespinosablanco/
Julio Fernández-Gayoso MedieroDirector of the DevOps Cloud Business Area for EMEA GBB at Microsoft.
Mentor of the madri+d Mentoring Network, Julio Fernández-Gayoso Mediero has a
Degree in Economy and Business Administration, Finance speciality, from University
of Santiago de Compostela, completed in 1986. He completed an Executive MBA
from Instituto de Empresa in 1995. Also, he completed Specialist Master’s Degree
Courses in “Business Strategy and Financial Acumen” and “Business Model Innova-
tion” in 2015-2016.
He began his professional career at IBM, managing and leading different business
areas linked to Information Management, Business Intelligence and Big Data both in
Spain and in EMEA. Since 2006 he manages the application development tool and
ALM and DevOps application (on premise and cloud) life cycle business area at Micro-
soft Europe. As part of these functions, for the last 20 years he has led international
teams, developing multicultural and multifunctional team management skills (sales,
marketing, technical).
During his years at both IBM and Microsoft, his priority was to develop the value-ad-
ded partners channel (services and ISVs) in the different European countries where he
was responsible. In this context, he has frequently held conversations with partners
to help them in their international expansion. This has allowed him to compare inter-
nationalisation tactics that work with those that pose implementation risks. He has
developed a ten-step methodology for developing joint business plans with partners.
From the viewpoint of skills and competences, he has acquired experience and com-
petences in international team management, developing different leadership styles to
this end, in addition to commercial team and partner coaching and mentoring tools
in different European countries.
Linkedin: https://www.linkedin.com/in/juliofernandezgayosomediero/
17 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
17
certification guidebusiness mentor madri+d
Rafael García del Poyo He is a lawyer and partner of the Digital Businesses Department at the Osborne Clarke law firm
in Spain.
Mentor of the madri+d Mentoring Network, Rafael García del Poyo is a lawyer and
partner of the Digital Businesses Department at the Osborne Clarke law firm in Spain.
He has been acknowledged as a professional leader in technology, media and tele-
communications by Best Lawyers International and is a lawyer recommended by
international directories such as Chambers Europe.
During his more than 25 years’ experience in the legal profession -exercised both in
Belgium and in Spain-, he has acquired extensive experience managing multidiscipli-
nary work teams made up of technical and legal experts of different nationalities and
in project management and organisation for clients. He has provided legal advice to
clients both in Spain and abroad and has participated in the execution of strategic
entrepreneurial plans in topics relating to the telecommunications law, e-commer-
ce, software licences, videogames, acquisition of hardware, outsourcing, big data,
electronic signature, cloud computing and personal data protection in very different
industrial sectors.
His current practice focuses on the implementation of projects and the preparation
of international commercial contracts relating to information technologies and com-
munication, e-commerce, digital content, engineering and telecommunications. In
particular, in the Fintech sector he has provided assessment for launching complex
financial products in the Spanish market and has provided legal advice in the field
of videogames, their distribution systems and the management of their intellectual
property.
He is Secretary of the Board of Directors of various technology companies and has
been involved in the legal defence of various issues at the Court of Justice of the
European Union including, namely, cases (C-468/10 - C-469/10) relating to “legitimate
interest” in personal data protection.
Linkedin: https://www.linkedin.com/in/rafaelgarciadelpoyo/
Pedro Guerra GutiérrezDirector of R&D at Medlumics, S.L.
Mentor of the madri+d Mentoring Network, Pedro Guerra has a Degree in Telecom-
munications Engineering from Universidad de Las Palmas de Gran Canaria (2001),
Doctor in Electronic Engineering from Universidad Politécnica de Madrid (2007) and
as a Master’s Degree in Business Administration from ESADE-Universidad Ramón
Llul (2015) and Financial Management from OBS-Universidad de Barcelona (2018).
18 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
18
certification guidebusiness mentor madri+d
He has spent most of his professional career related to R&D in the electronics indus-
try, particularly electromedicine. He embarked on his career in 1999 at the National
Microelectronics Centre (CNM) and is a member of the Higher Council for Scientific
Research (CSIC), although he soon joined the industry as a systems engineer enga-
ging in the design of digital communication systems, both satellite and terrestrial
mobile telephony (2G and 3G).
He developed his doctoral thesis in the field of medical engineering and radiophy-
sics, focusing his research on positron emission tomography, a molecular imaging
technology with a wide range of applications in cardiology, neurology and oncology.
Later, as a researcher at Universidad Politécnica de Madrid, he worked actively in
the development of new medical technologies and their application in the industry.
Since 2015 he occupies the post of R&D Director at Medlumics, S.L., a Spanish
startup in the medical devices sector which has developed a revolutionary technology
for optical coherence tomography imaging.
Linkedin: https://www.linkedin.com/in/pguerragutierrez/es
Julio Marco BarrosoVenture Capital Fund Director. European Commission Business Coach. Board Advisor
International Coach Federation Spain.
Mentor of the madri+d Mentoring Network, Julio Marco is an economist and has
a MBA and Master’s Degree in Corporate Finance from IE Business School and in
International Trade from ESIC.
Since 2014 he has given more than 100 business coaching sessions in different
sectors and countries as a Business Coach of the European Commission. He is one
of the three top business coaches of the European Commission. He is an Associate
Business Coach of the CDTI (Centre for the Development of Industrial Technology) and
participated in the Commercialize business programme for two years in the develop-
ment of the SME instrument of the H2020 of the European Commission.
Julio Marco currently occupies the post of Board Advisor of the International Coach
Federation Spain and was Secretary-General of ICF Spain (2012- 2016). He is a cer-
tified PCC ICF Coach with over 2,500 hours of executive coaching.
Since 2003 he occupies the post of Director of the Pan-European Venture Capital
Healthcare Fund Spain at Gilde Healthcare. He was a partner of other venture capital
funds in IT, telecommunications, Internet, nanotechnology, biotechnology and agri-
food such as New Media Spark, Milenio Capital Partners, Capital Health and Katali-
mento Investments.
19 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
19
certification guidebusiness mentor madri+d
He occupied the post of General Manager at international companies in different sec-
tors such as Automotion (Porsche, Lamborghini, Subaru, Kia and Bertone), Director
of Universidad Europea de Madrid, Director of World Telecom (English telecommuni-
cations operator), partner of various Venture Capital Funds and entrepreneur.
Since 2000 he has been training executives of leading Spanish and international
companies in different sectors, including Big Pharma, finance, telecommunications,
healthcare, energies, etc., in the development of executive skills: Emotional Intelligen-
ce, Communication, Leadership and creation of high-performance teams. Motivation,
change management, etc.
He is a lecturer at various universities and business schools. He is a regular speaker
and writer (Viaja conmigo a Itaca, Editorial Kolima, 2017, a book on Personal Develo-
pment and Coaching). He has participated in the radio programme Coaching Capital
as founder and panellist for the past three years, which is broadcast on Fridays on
Capital Radio from 6:30 pm to 7:30 pm.
Linkedin: https://www.linkedin.com/in/juliomarcobarroso/
Tomás Otero PinoHe occupies the post of Human Resources Director for Norgine in Spain and Portugal.
Mentor of madri+d Mentoring Network, Tomás Otero is Human Resources Director for
Norgine in Spain and Portugal, a company where he has worked since 2010 and in
which he participates actively in various international projects within the organisation.
Prior to that he worked for ten years in the consulting sector, specialising in the phar-
maceutical and healthcare industries, mainly carrying out executive search and career
plan development mandates, both in Spain and abroad.
He collaborates actively with several specialist pharmaceutical publications such as
Farmespaña, PMFarma and Pharma Market.
He is a collaborator of the CESIF (School of Higher Education of the Pharmaceutical
Industry of Madrid) in international and executive master’s degree courses. He is a
member of the AEDRH (Spanish Associatio of Human Resources Directors).
Linkedin: www.linkedin.com/in/tomasoteropino/es
Hermógenes del Real ÁlvarezHe is an expert in the management of public companies and entities. He is an entrepreneur,
manager, consultant and speaker.
Mentor of the madri+d Mentoring Network, Hermógenes del Real has over 25 years’
experience managing public companies and entities. He is a member of the Scientific
Committee of the Organisational Effectiveness Centre: Talent-UAM. Associate Professor
of the Business Administration Department of Universidad Autónoma de Madrid (UAM)
20 / 221
about the authors
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
20
certification guidebusiness mentor madri+d
and Head of Studies of the IADE-UAM University Research Institute of Administration of
Knowledge and Innovation of Companies of Universidad Autónoma de Madrid. Since
1993, his teaching experience as a professor and project tutor encompasses various
disciplines related to Direction, Management and Enterprising, both in Master’s Degree
and Executive Development programmes in Spain and abroad.
His academic training is related to business management. He has a Degree in Business
Sciences from UAM, a Doctorate in Financial Economy: Banking and Stock Markets
from UAM, a Master’s Degree in European Communities from CEOE, he occupies the
post of Chief Knowledge Officer (CKO) at Insead Fontainebleu and Euroforum and
has completed a Fellowship in the Course of Research Management of Real Colegio
Complutense and Harvard University.
Hermógenes del Real is a mentor of Instituto de Empresa in the Lidera project and
occupied the post of General Manager of the Consulting and Training Division of ENTEL
IT - Consulting and Human Capital Manager at Deloitte, where he was responsible for
the eLearning, equal opportunities and diversity management in Spain lines of business.
Linkedin: www.linkedin.com/in/herm%C3%B3genes-del-real-alvarez-88229b12/
module 1Content and structure of the guide. Tools.
22 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
22
certification guidebusiness mentor madri+d
module 1Content and structure of the guide. Tools.
1. Content and structure of the guide. Tools
“Business mentor madri+d” certification is based on the work carried out on training
modules aimed at reinforcing and validating the theoretical and practical knowledge
of the certified professionals and achieving a better analysis, of both the vision and
capabilities of entrepreneurs and the actions to be proposed as an entrepreneurs
programme mentor or manager.
The basic business areas certified include knowledge of key mentoring aspects for
entrepreneurs, of the startup life cycle and of skills related to the mentoring relationship
management. The following scheme shows the correspondence between each of
these three areas and the modules of this guide:
Figure 1. Knowledge areas of the “business mentor madri+d” training model and correspondence with the guide modules.
Knowledge area 1
Knowledge of key aspects of mentoring for entrepreneurs
MODULE 2
TRAINING MODEL
RegistroAcuerdo de mentoring
ClasificaciónRecomendación
Búsqueda activa
Incorporación
PresentaciónCreación de equipos
Alto potencial
Demandas, requisitos de mentores
Asignación de mentores
Mejora del equipo
ActasReunionesReparto de
responsabilidades
Desarrollo de la relación
Mejora continua
EstadísticasCuestionario final
Continuidad tras periodo
Cierre y evolución
Knowledge area 2
Knowledge of key aspects of startup life cycle management
MODULES 3 to 9
EscalabilidadCompromiso y
desarrollo(Plan de negocio)
Viabilidad y validación
(Enfoque Lean)
Idea y concepto del negocio
Pre-semilla
Asentamiento
Semilla Fase temprana Fase Intermedia
Knowledge area 3
Knowledge of mentoring communication and relationship
management skills
MODULES 10 to 12
Objetivo
Generar confianza
Saber escuchar
Saber preguntar
Acción
Realidad
Opciones
Deci
sión
Better analysis of entrepreneurs’ vision/capabilities and of the actions to be proposed by the mentor
23 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
23
certification guidebusiness mentor madri+d
module 1Content and structure of the guide. Tools.
1.1. Key aspects of the mentoring for entrepreneurs process
This first knowledge area, which corresponds to module 2 of this guide, includes the
definitions, goals and differentiating features of quality mentoring for startups, their
fundamentals, the characteristics of the relationship between the mentor and the
mentee and those of group mentoring, the revision of practical mentoring experiences
for entrepreneurs and critical aspects for successful mentoring for entrepreneurs.
It also include specific aspects of the madri+d methodology such as those relating to
the mentoring agreement, incorporation to the programme or network, assignment
of mentors and entrepreneurs, successful development of the relationship and follow-
up thereof.
This knowledge area is completed in other modules of this guide, making it possible,
for example, to understand certain habits and thought processes of entrepreneu-
rs (module 3), generate habits to facilitate the fluidity of the mentor-entrepreneur
relationship (module 4),... Furthermore, “key questions” that the mentor can ask in
relation to the contents of each module are suggested throughout the guide by way
of reference.
1.2. Key aspects of startup management and life cycle
Another essential part of the “business mentor madri+d” certification consists of the
knowledge and tools associated with the startup life cycle, from the pre-seed stage
to the establishment stage, which is included in modules 3 to 9 of this guide.
This knowledge allows the mentor to expand the knowledge based on their personal
experience and can be more or less necessary at different moments of the startup
life cycle, also known as the “Valley of Death”, prior to obtaining profit. These stages,
based on the “Goldsmith Model®”, can be defined as follows:
• Pre-Seed Stage: Stage in which the idea and technical viability of the new product
or service are analysed and market needs and their potential economic viability
are assessed.
• Seed Stage: Pre-commercial stage in which the first prototypes are developed
and validated by potential users, possibly with a Lean Startup approach.
• Early Stage: Initial stage of sales and commitment to the goals established in the
Business Plan.
• Mid Stage: Stage of sales growth and distribution channel development, which
can be associated with internationalisation.
24 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
24
certification guidebusiness mentor madri+d
module 1Content and structure of the guide. Tools.
Although most of the concepts and tools reviewed in this guide can be used by the
startup mentor at different stages, they are assigned in the following graphic, by way
of suggestion, at moments of the company’s life cycle in which reviewing them can
be especially relevant to the mentor and entrepreneur.
Figure 2. “Business mentor madri+d” training model: Key aspects of the startup life cycle.
Commercial VisionLegal protection. Legal Aspects
Setup and management of digital Transformation Equipment. Context
Shareholders’ Agreement. Attraction of talentSkills
Prototype (Canvas)Strategic vision. Go to market. Metrics
Presentation to investors
ScalabilityCommitment and
development (Business plan)
Viability and validation
(Lean approach)
Business idea and concept
Pre-seed
Establishment
Seed Early Stage Intermediate Stage
Commercial vision. Market analysis. Job to be done MVP (Minimum Viable Product), Design Thinking UX (User Experience). Economic and financial analysis
Project Management (Serum)
Business models. Empathy map Market pain
Internationalisation. PESTEL Crossing the chasm
1.3. Communication and mentoring relationship management skills
Modules 10 to 12 of this guide provide tools for helping mentors to be more effective
in their way of communicating what they know to both individual entrepreneurs and
teams. It also provides information for entrepreneurs to communicate or present their
projects more effectively.
This knowledge area includes coaching concepts, techniques and skills applied to the
management of the relationship by the mentor: building trust, asking positive ques-
tions, empathetic listening and feedforward that will make it possible to implement
and follow-up actions more effectively. All within a structured coaching framework that
includes the establishment of goals, definition of the current status (reality), analysis
of the actions to be undertaken and commitment or decision to implement them. The
above is summarised in the figure below.
25 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
25
certification guidebusiness mentor madri+d
module 1Content and structure of the guide. Tools.
Figure 3. “Business mentor madri+d” training model: Communication and mentoring relationship management skills.
Goal
Build trust
Know how to listen
Know how to ask questions
Action
Reality
Options
Deci
sion
In relation to team management, module 11 reviews the characteristics of startup
teams, leadership styles and the proper application thereof.
Lastly, module 12 provides information that mentors can transmit to entrepreneurs
to communicate their activities and present their project to investors or other “entre-
preneurial ecosystem” agents more effectively.
module 2Mentoring for entrepreneurs
Eduardo Díaz Sánchez
27 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
27
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
2.1. Teaching goals
In this module we will review four basic aspects of the entrepreneurial mentoring
relationship:
1. Review of the mentoring concept, types and differences between mentoring and
other types of support.
2. Customisation of mentoring for entrepreneurs in accordance with the participants’
basic needs and contents of a potential mentoring agreement.
3. Review of the four most relevant processes within the formal mentoring relationship
developed under the framework of enterprising support programmes or mentoring
networks.
4. Review of a series of critical aspects in entrepreneurial mentoring relationships.
2.2. Mentoring
Mentoring is a relationship based on the personal commitment between the men-
tor and mentee through which experiences, knowledge and contacts are
shared to contribute to the mentee’s personal and professional growth.
In accordance with the description included in module 4, a mentor plays the role of
trusted advisor, helps, teaches and shares practical advice within the context of a
relationship of respect between the parties. The mentor assumes a selfless role in
the person’s learning, development and success, but must be honest and clear and
create clear expectations.
The mentee can benefit from the mentoring by accessing new models and
viewpoints, accessing new situations arising from the mentor’s position or sta-
tus, discovering and enhancing personal skills and attributes (identifying features),
assuming new challenges to achieve better results or resolve complex situations,
and accessing new contacts.
To this end, the mentor can: share experiences by telling stories or conveying
viewpoints on topics of interest to the mentee; providing opportunities for the
mentee to think (not to be confused with coaching, as we will see below); offering
constructive feedback; giving advice; sharing knowledge; sharing influences
or empowering the mentee; or sharing its contact network, stories, sources of
information,...
28 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
28
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
As regards communication, as we will see in module 4, a good mentor must hold
efficient conversations, focusing on the challenge of self-improvement in an atmos-
phere of positive and constructive attitudes, and redirecting inappropriate questions
to ensure that they are constructive and clear.
Compared to other types of support such as consulting, coaching or training, men-
toring is the only one that, by definition, is not remunerated. Although “mentoring”
is usually understood as a consulting aid, remunerated and provided in the context
of accelerators or incubation programmes, this benevolence is the major difference
between mentoring and other forms of support such as CONSULTING, COACHING
and TRAINING. Some of the features that make it possible to differentiate between
these four types of support are:
• MENTORING: Mentoring facilitates the transfer of knowledge and experience from
one person (mentor) to another who needs them (mentee) and who is respon-
sible for putting them into practice.
• CONSULTING: Consultants execute changes or projects that can be accom-
panied by new knowledge. Consultants are responsible for the changes or
improvements implemented.
• COACHING: Coaches offer, through questions and communication techniques,
help to reflect, think differently and improve communication with the aim of achie-
ving the set goals. The coachee is responsible for his or her own learning.
• TRAINING: Instructors provide the necessary knowledge to transform skills or
knowledge. The person who receives the training is responsible for his or
her own learning.
Therefore, mentoring is based on the use of techniques to reflect, or on pro-
viding information or executing projects, although it can give rise to activities
shared with these types of activities.
Not all types of mentoring are the same: mentoring can be provided on an individual
basis or in a more structured setting, at a work centre or otherwise,... Some types
of mentoring include:
Formally provided mentoring: Based on a structured programme wherein a
mentoring organisation or network provides the opportunity to establish a relationship
with two or more people. They are programmes aimed at specific groups to speed up
their development and progress. Mentors and mentees are assigned and relationship
monitoring and support tools are established. Formally provided quality mentoring
requires a high degree of dedication to manage it, normally greater than that required
in other types of support such as consulting or training.
29 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
29
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
Natural mentoring: It occurs informally when an experienced person aids the
development of another, generally younger person, based on trust between both
parties. Trust between the mentor and the mentee is essential for a successful mento-
ring relationship and, therefore, formal mentoring programmes that establish informal
mentoring relationships are the most effective.
Situational mentoring: It is generally focused on the short term and occurs at cer-
tain moments in time and with very specific purposes. For example: identify a
person established in a new market that can provide the mentee with information and
contacts based on his or her experience.
Organisational or supervisory mentoring: It occurs between a colleague or
supervisor and an employee with less experience in certain areas.
At times, a difference is established between internal mentoring and external men-
toring in accordance with the setting in which the knowledge transfer takes place:
if that transfer takes place within a corporate setting, it is called internal mentoring;
if the transfer comes from another company or sector it is called external mentoring.
This makes it possible to enrich companies and sectors, and a good example of this
is cross-mentoring between executives of different companies. Mentoring is someti-
mes referred to as internal, while coaching is external. This difference has conceptual
failures that must be clarified: there is internal mentoring and external mentoring, in
addition to internal coaching and external coaching, but what differentiates them is
the setting in which they take place.
Other types of mentoring are reverse mentoring, in which the mentor is the younger
person, peer-to-peer mentoring and online mentoring based on mentor-mentee
meetings over the Internet.
2.3. Mentoring for entrepreneurs
As opposed to the other forms of traditional mentoring mentioned earlier, mentoring
for entrepreneurs is based on innovative, effective and differentiated management.
It does not consist of proposing ideas or giving superficial opinions, or an executive
or employee with more experience providing assessment to another with less expe-
rience. It consists of helping the entrepreneur to improve personally and find the right
path to achieve what they want for their startup. The mentor’s age or position are not
important, but rather what they can both (mentor and entrepreneur) offer each other
mutually. As we will see in this module, entrepreneurial mentoring relationships are not
hierarchical but rather are based on the mutual reinforcement of two or more fellow
travellers which pool knowledge and contact networks that will allow them to learn,
make decisions and solve problems together.
30 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
30
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
Managing entrepreneurial mentoring relationships is also characterised by their com-
plexity and need for flexibility. On the one hand, establishing an appropriate framework
for the relationship with a fixed calendar of face-to-face meetings and follow-up reports
is important, but it is no less important to be open to changes with respect to the initial
planning, to online relationships, to understanding that your mentor may be younger
than you... all without forgetting the importance of providing access to good mentors
who will feel attracted by the most prestigious programmes with the best results.
2.3.1. Basic requirements of mentoring for entrepreneurs
Hereinafter, we will refer to mentoring for entrepreneurs, where the mentee is an
entrepreneur who will basically require support to launch or consolidate his or her
startup. Mentoring for entrepreneurs is based on mutual trust and on a series of basic
premises.
A mentor is expected to have in-depth knowledge of the corporate world in order
to “visualise what lies ahead” for the entrepreneur, skills for helping others and so they
can see things from different perspectives, availability during the support period and
motivation to help to define and follow an action plan with clear goals.
Furthermore, the supported entrepreneur is expected to understand that they are
the main driver and are solely responsible for the success or failure of the relationship,
who is capable of carrying out an initial evaluation of their strengths and weaknesses
they want to improve, of establishing an action plan with clear goals in collaboration
with their mentor or mentee and who undertakes to work on the learning areas they
define.
2.3.2. The mentoring agreement
Before initiating the mentoring relationship, a mentoring agreement explaining and
clarifying the commitments and initial expectations of both parties, in addition to the
confidentiality conditions, can be signed. Three aspects that can be addressed in
the mentoring agreement are the expectations of both parties with respect to the
relationship, their formal commitments and confidentiality terms and conditions.
Firstly, the EXPECTATIONS of both parties can be the following:
• What is expected of the mentor: for example, being open to exchanging
their experience, dedicating time to the relationship, listening and advising, not
deciding for the entrepreneur and contributing to establishing and monitoring a
business development plan. Additionally, the mentor must know, if established by
the mentoring programme or network, that the entrepreneur is free to follow their
31 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
31
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
advice and, therefore, is exempt from any liability arising from their support as
mentor, except confidentiality.
• What is expected of the entrepreneur: for example, being interested in learning
to accept criticism, being capable of identifying goals, striving to build the rela-
tionship, informing if changes are required during the relationship and accepting
that they are the solely responsible for their own development.
Secondly, the mentoring agreement can include the COMMITMENTS acquired by
both parties.
These commitments can be related to the level of activity (e.g.: initiate at least
one relationship during the first year of participation in the programme), frequency
(e.g.: minimum number of mentoring-related meetings), participation in the pro-
gramme (e.g.: attendance at meetings or training), dedication (e.g.: prepare or
facilitate the preparation of meeting minutes, inform of changes in goals, changes in
the mentoring team,…) or evaluation of the relationship (e.g.: complete evaluation
questionnaires).
Thirdly, the mentoring agreement can include the CONFIDENTIALITY TERMS AND
CONDITIONS.
The confidentiality terms and conditions will remain in force for a certain period after
the relationship has ended. They may include conditions such as the need to treat all
information received as strictly confidential, restrict access to the information received,
adopt security measures to avoid disclosing information or returning or destroying
information upon written request.
2.4. The mentoring process
Mentoring relationship management must take into account the four processes of
mentoring for entrepreneurs described in this section and that is summarised in the
following figure: incorporation of mentors and entrepreneurs, assignment of mentors,
development of the relationship, development of the relationship and, lastly, closing
and final evaluation.
32 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
32
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
Figure 4. The four processes of mentoring for entrepreneurs.
RecordingMentoring agreement
ClassificationRecommendatio Active search
Incorporation
PresentationCreation of teams High potential
Mentor demands, requirements
Assignment of mentors
Team improvement
MinutesMeetingsDistribution of responsibilities
Development of the relationship
Continuous improvement
StatisticsFinal questionnaire
Continuity after period
Closing and evaluation
2.4.1. Process I: Incorporation
The incorporation process must take into account the selection of entrepreneurs,
invitation of mentors and formal registration of both profiles in the mentoring pro-
gramme or network:
• Selection and registration of entrepreneurs. It begins with an initial contact
with the entrepreneurs, for example after reviewing the registrations on a website
or at a meeting that makes it possible to verify the characteristics of their projects,
demands and degree of commitment. Next, it will be necessary to provide infor-
mation on expectations, processes, etc., that will allow the entrepreneur to know
what is expected of them and of the mentor or mentors assigned to them at all
times. If the entrepreneur agrees with the terms and conditions of participation,
they will be invited to formally sign up to the programme or network, for example
using an online tool.
• Invitation and registration of mentors. The identification of mentors can take
place after a specific search or by recommendation of other people, for example
mentors who already belong to the programme or network. The selection of the
mentor must take into account skills or knowledge of particular use to the pro-
gramme in a broad sense or specific demands of entrepreneurs. After an initial
selection, subsequent personal contact may be required and the formal invitation
and registration of the mentor in the programme or network, for example through
an online tool.
33 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
33
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
2.4.2. Process II: Assignment
Assignment of mentors to entrepreneurs begins with the request for possible assig-
nments and continues with the creation of mentoring pairs or groups.
Request for possible assignments. The request can be made by the mentor, the
entrepreneur or both, but is usually more effective when the mentor is the driver. In
this last case, the mentor can make their selection in different ways: by accessing
information about entrepreneurs seeking mentors, after receiving suggestions from
entrepreneurs by the programme manager or after personally meeting the entrepre-
neurs, for example at introductory sessions. Personal information is important for
verifying that personalities “match” in a certain way so as to build the necessary trust
to ensure a successful relationship.
Creation of mentoring pairs or groups. In general, the manager performing the
assignment based on criteria such as the mentor’s experience in a certain sector,
their personal skills or the capacity to meet entrepreneurs’ specific needs. In the case
of group mentoring, a mentor leader can be designated, who will be in charge of
ensuring that the mentoring team meets the entrepreneur’s needs, for example incor-
porating new mentors, making changes in the composition of the mentoring team or
organising new meetings to address specific topics.
2.4.3. Process III: Development of the relationship
The development of the mentoring relationship begins with an initial meeting, followed
by successive meetings during which a development plan agreed upon at the initial
meeting between the entrepreneur and their mentor or mentors will be followed up.
Due to its particular importance, the initial mentoring meeting must have a well-de-
fined structure that will make it possible to lay the foundations for a satisfactory
relationship. The mentoring programme or network manager can ensure that a cer-
tain agenda with the following points, for example: introduction of the participants,
open discussion on the entrepreneur’s professional development, their interests and
expectations, confidentiality, areas to be strengthened, etc., and agreement (at least
preliminary) upon a future meeting schedule, to be managed by the entrepreneur. After
the initial meeting, as established in module 3 of this guide, all the relevant information
that will make it possible to determine the status and health of the business project
will be gathered for the preparation of the mentor. At this initial stage, the mentor
must be aware of the emotional and motivational state of the entrepreneur, the financial
status of the project and the technical status of the product or service.
34 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
34
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
The successive meetings will be held with a minimum frequency and duration.
By way of example, a duration between two and four hours per meeting and a mini-
mum frequency of at least four meetings over a six-month period could be established.
Possible discussion topics include:
• Reflection on the company’s mission as a basis for setting the goals of the men-
toring relationship.
• Establishment of three- or five-year goals, for example, to help the entrepreneur
to determine where they want to go, to organise their time and to identify the re-
sources they needs to achieve their goals. Goals must be prioritised, written and
reviewed in successive meetings.
• Strategy, organisation, improvement of specific knowledge,... based on the men-
tor’s experience and supported by the contents of this guide, for example, the
Business Model Canvas, empathy maps to better identify customer needs, etc.
• Improvement of the entrepreneur’s skills and management of relationships with
their team or with other partners or competitors.
• Knowledge of the environment or analysis of internationalisation with tools such
as, for example, the PESTEL analysis.
It is advisable for the entrepreneur to be responsible for contacting the mentors
prior to meetings and meeting minutes. In the case of group mentoring and if a men-
tor leader role has been defined, they may transmit their proposals to the mentoring
programme or network manager. Halfway through the relationship, it is advisable to
perform a mid-term review of the progress, expectations and possibilities of impro-
ving the support provided. Also, it is important to show availability and openness
on both sides, address potential conflicts and, if necessary, propose possible addi-
tional meetings with other mentors or experts.
2.4.4. Process IV: Closing and evaluation
Both if the mentoring relationship has been satisfactory or if, for some reason, it has
not fulfilled the parties’ expectations, it would be convenient to end it in an orderly
manner and provide information both to the mentoring programme or network mana-
ger and to the mentor.
Information to the manager. They will inform on the end of the relationship (the
entrepreneur may be the one who informs), on the mentoring results (mentors and
entrepreneurs may complete a satisfaction survey) and on the possibility of continuing
the relationship beyond the initially established period.
35 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
35
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
Information to the mentor. Before ending the relationship, it would be convenient
for the entrepreneur to express a constructive opinion and their gratitude for the time
dedicated by the mentor or mentors.
2.5. Critical aspects of mentoring for entrepreneurs
To finish this module, following are five especially critical aspects for the success of
the formal mentoring relationships for entrepreneurs:
1. Signing of the mentoring agreement, which explains and clarifies the expec-
tations and the initial commitments of both parties and confidentiality con-
ditions.
2. Understand that the mentor’s commitment depends on their motivations and that
these may vary with each type of relationship. These motivations may be related
to altruism and satisfaction (e.g.: intention of returning to the company after a
successful professional career), to professional interests and learning (more
common between entrepreneurs, middle managers or executives) or to public re-
cognition (more common between professionals related to the consulting world).
3. An appropriate assignment of mentors, taking into account the mentor’s expe-
rience or the composition of the group of mentors.
4. The mentor or mentors’ personal skills: their capacity for active listening, the
empathy and trust generated,..
5. The management of the relationship, normally monitored by a manager who
could report to a mentoring programme or network monitoring committee. Of
particular importance are transparency in the selection process (the participation
requirements of mentors and entrepreneurs in the programme or network must
be public), clarifying the duration and responsibilities relative to relationships,
establishing specific and demanding goals, establishing a milestone achie-
vement timeline, organising regular follow-up meetings with sufficient advance
notice, motivating (if necessary) the reformulation of the support provided or
of any aspects thereof and having adequate management tools, if possible,
differentiated and specific to monitoring mentoring relationships.
36 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
36
certification guidebusiness mentor madri+d
module 2Mentoring for entrepreneurs
2.6. Resources for deepening knowledge
Recommended readings
• Lonnie D. Inzer, C. B. Crawford, Ph.D. “A review of formal and Informal Mentoring:
Processes, Problems, and Design”, Journal of Leadership Education, Volume 4,
Issue 1 (2005).
• Beatriz Valderrama. “Development of mentoring and coaching skills”. Publisher:
FT Prentice Hall (2009).
George Vukotich. “Mentoring Startups: Getting the most out of mentoring in a startup
environment”. CreateSpace Independent Publishing Platform (2016).
Useful Websites
• Philipp Laufenberg #edtech “We Studied 100 Mentor-Mentee Matches — Here’s
What Makes Mentorship Work” http://firstround.com/review/we-studied-100-men-
tor-mentee-matches-heres-what-makes-mentorship-work/
• “Mentoring”, helping others for the sake of enterprising. https://cincodias.elpais.
com/cincodias/2018/01/16/companias/1516115870_534295.html
37 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
37
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
module 312+1 sales and startup myths. Sales techniques
Roberto Espinosa Blanco
38 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
38
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
3.1. Introduction
After collaborating with dozens of startups over the years, I have continuously come
across a series of myths related to their sales approach in general.
These myths, which luckily do not affect all startups equally, are usually closely related
to the reason why many of these companies are created: a technology product. This
product is often placed “on a pedestal”, which considerably narrows entrepreneurs’
vision of what a company actually is.
On the one hand, in a world very given to quoting grandiloquent phrases and to provi-
ding simple examples of formerly successful entrepreneurs converted into technology
gurus, these examples, launched willy-nilly with the best of intentions, can ultimately
become a kind of “spiritual guide” for entrepreneurs and excuses to not do certain
things that we would otherwise understand to be basic. For this reason, we include
a list of “12+1 Sales and Startup Myths” in this module.
In our role as mentors, it is important to help entrepreneurs understand the real impor-
tance of the sales function and to organise and plan their work. For this reason, this
module also includes a brief overview of some of the techniques analysed in depth by
various of the most well-known methodologies used by commercial teams.
3.2. Sales and startup myths
The following list of 12+1 Sales and Startup Myths does not seek to be a compre-
hensive or, naturally, deterministic final list. Rather, it is a tool that should make the
mentor and, by extension, the mentee, reflect on the company’s commercial strategy.
Commercial strategy in the broadest sense of the word, from product packetisation
to the end of the process.
In any case, I invite the mentor to reflect on whether, in their experience, there are
any more (or less) myths:
1. Build it and they will come. There are many examples of business mo-
dels that require building capacity in anticipation of a demand that will grow
faster than the speed at which that capacity will be built. Think, for example,
of telephone operators and cable infrastructure. Many entrepreneurs fall so
deeply in love with their product that they rush headlong into manufacturing
without further proof than their own vision. Without market comparison, without
analysing the business model, without analysis the competition or substitute
products, without proof that their marvellous products will all but sell themsel-
ves.
39 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
39
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
2. Love your product above all things. Closely related to the previous myth,
there are many entrepreneurs whose love for their product clouds the “pa-
ranoia” that any entrepreneur should have. Constant critical thinking and a
mindset of continuously challenging sacred cows should be permanent in
any entrepreneur. Many of these “perfect” products end up being products
in search of a solution which additionally, due to being perfect, do not require
marketing effort.
3. Design paralysis. The omnipresence of Design Thinking and agile entre-
preneurship methodologies that advocate continuous iteration as a way of
progressing quickly makes some entrepreneurs fall into an endless improve-
ment loop from which they cannot escape because the product is never good
enough or sufficiently proven. Silicon Valley, with its products in a perpetual
beta state, has fostered this myth.
4. The box is what matters. The enterprising scene often recognises startups
more on the basis of the money they are capable of making than what they
sell. Burn rate and box months are among the first questions that an investor
in search of funding usually asks. But veteran entrepreneurs know that the
box is not what matters, but rather cash flow and, thus, sales. There is an
aphorism in this regard summarised by the acronym CFIMITYM (cash flow is
more important than your mother).
5. A demo is not a sale. Startups “entangled” in demos with big multinatio-
nals are commonplace in B2B environments. It is also something they usually
show as proof of the traction they are gaining. However, sales reps with B2B
experience know that demos with big companies do not usually turn into sa-
les. In companies, R&D departments are normally very far from the business
and when they use startups they do so as a cheap R&D option. Naturally, it is
very difficult to say no to a big company given the ghost of a chance to land a
major contract, but the fact is that in most cases multinationals use startups
to learn. These demos are usually a great waste of time and money and, in
many “postmortems”, entrepreneurs cite free demos as one of the reasons
why they ended up failing.
6. Internet killed the intermediaries. Few entrepreneurs understand the dy-
namics of indirect channel sales and normally disregard them as a thing of the
past. Direct sales seems the obvious choice for any modern-day business
and, with the digital marketing tools currently available, it seems that any cus-
tomer, whether consumer or professional, is within our reach via the Internet.
This reasoning does not live up to reality, since the world’s leading technology
companies are mostly intermediaries. Although it is almost always interesting
to start off with a direct sales strategy, it is no less true that it will be impossible
40 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
40
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
to maintain in the medium term, so the sooner indirect channels are planned
the better.
7. If you want to go fast… There is a famous African proverb that says: «If you
want to go fast, go alone. If you want to go far, go together». It seems that
entrepreneurs usually take this advice at face value and, since speed is what
matters most, they go as alone as possible. However, this world of Open
Innovation reminds us that to go fast you we must go together. I have always
been surprised by the reluctance of startups to collaborate with other startups.
Something like co-opetition, increasingly common in big companies, is rarely
seen among startups.
8. Less jargon and more going out and selling. Unfortunately, it is common
to find entrepreneurs who have never been before a potential customer. Entre-
preneurs who are abreast of the latest growth hacking trends and are capable
of including all digital marketing jargon in their discourse without blinking, but
have in turn never bothered to ask a potential customer if they would purchase
their product.
9. The bad sales rep, the goalkeeper. The commercial function is generally
underestimated in the corporate world but is directly undervalued in the startup
world. As technology companies, most startups consider that the problem is
always not having a good enough product. Based on this idea, when it comes
to going out and selling, we normally send the «worst» engineer, not the «key»
engineer who is reluctant to go out on the street.
10. The best sales rep is not the best sales manager. Another big mistake
made by companies of all sizes is to promote the best sales rep to sales ma-
nager. Startups are no different and this mistake is often observed. It is quite
obvious that the same skills are not required to do one thing and another.
11. Selling is a very old-school art. Most entrepreneurs are unaware of basic
-and it goes without saying- cutting-edge sales methodologies. The relations-
hip between the purchasing and sales departments can be described as an
arms race in which, when one side advances, the other responds and adapts.
In the same manner that companies do not purchase the same way as 20
years ago, we cannot sell the same way as 20 years ago.
12. Sales sells. Yes, but this function must play a critical role in the definition of the
company›s strategy. If innovation currently consists of finding out things about
the customer that will allow us to better adapt our offering, the commercial
function must play an important role in the company›s innovation processes.
Neither must we forget that innovation = technology + business model and
that the sales function has the greatest expertise in terms of business models.
41 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
41
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
12+1. We are all sellers. In this age of transparent companies, all employees are
responsible for sales. The employees themselves can and must be the best
ambassadors of their own company. It is disheartening to see members of a
startup speak negatively about their own products.
3.3. Brief introduction to sales methodologies for mentors
If the sales function is something traditionally considered very tactical and is often
looked upon with certain disdain from other functions in companies, in startups this
situation is, in general, more acute.
Glorification of the product above all else that leads to the thought that “if something
is good enough, it will sell itself” is common in startups, and this is a serious error.
We must bear in mind that even the most modern, large organisations have problems
implementing sales methodologies, so it does not make sense to try it in a startup.
However, knowing the basics of these techniques can help to detect major mistakes
or initiate the path towards a proprietary work methodology.
One final remark before we begin: these methodologies were designed for B2B envi-
ronments, although they also have certain B2C applications. In any case, it will be
difficult to find B2C startups that do on-site sales in our support processes as mentors.
We can refer to four types of sales methodologies1:
• Based on processes: They are widely used because they are easy to teach, gi-
ven the predictability required by executive teams, and are useful in complex sales
processes with long closing cycles.
• Based on personal relationships: In this case, the approach is to identify the
appropriate people and build good relationships with them in order to advance in
the sales process. They are usually sales rep’s favourites because they maximise
the use of something intangible such as “relationships”. They are in decline, since
corporate purchasers “shielded” against them through round tables and collective
decisions.
• Neurolinguistic programming models (PNL): They are very popular due to their
simplicity and the promise of fast results, but are only applicable to short sales
processes, normally B2C.
1. Tom Sant, The Giants of Sales What Dale Carnegie, John Patterson, Elmer Wheeler, and Joe Girard Can Teach You About Sales Success, Chapter II
42 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
42
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
• Tactical models: They are models aimed at helping in a certain step of the sales
process, normally closing. They must be very specific to the industry and to the
type of purchaser, and always in demand due to being easily taught in short trai-
ning sessions.
“The Primer” model 2 creates a consultative sales process that focuses on the cus-
tomer’s needs, with very precise instructions to the seller regarding what to do and
what to say at any given time, with four stages in the sales process:
• Start: In which the customer’s needs are identified.
• Proposal: In which a customer-specific value proposition is defined.
• Demo: Which shows how the solution meets the customer’s needs.
• Closing: In which the order is achieved.
Of particular interest to the sales process are the “Six Rules for being nice” 3:
• Be sure to show a genuine interest in the other person.
• Smile.
• Remember that the most important sound in any language is the name of the
person in front of you.
• Be a good listener. Encourage the other person to talk about themself.
• Talk from the viewpoint of the other person’s interests.
• Make the person feel important and do so sincerely.
Furthermore, negotiations -and obviously a sale is just that- are not a zero-sum game4
in which one side has to lose for the other side to win, but rather agreements can be
reached whereby both sides win.
In a sales process, neither we5, nor our communication style nor our way of seeing the
world matter, only the person in front of us. Being sufficiently flexible so as to adapt to
the style that best adapts to our interlocutor will ensure more effective communication
and will not prevent us from succeeding in our marketing efforts.
2. Walter A. Friedman, HBR Working Knowledge: John H. Patterson and the Sales Strategy of the National Cash Register Company, 1884 to 1922
3. https://es.wikipedia.org/wiki/C%C3%B3mo_ganar_amigos_e_influir_sobre_las_personas
4. https://es.wikipedia.org/wiki/Juego_de_suma_cero
5. David W. Merrill, Roger H Reid. “Personal Styles & Effective Performance”
43 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
43
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
To qualify an opportunity -a “lead” in sales jargon- there must be a need (normally
referred to as a “pain”), a quote and the person must have decision-making capacity.
If any of these factors are missing, the person can still be an interesting interlocutor in
our sales process, but we cannot consider them a qualified lead6. Let’s consider the
seven stages of a sales process:
• Establish rapport: Make the interlocutor feel comfortable with us by adapting to
their communication style.
• Reach an initial agreement: In this agreement, which we can consider an agenda
and will establish the negotiation principles. The goal relating to the meeting, time,
role of the different parties and conclusion.
• Discover the customer’s pain: Through active listening, we will try to discover
-beyond what is said- the underlying need (pain).
• Talking about money: Money is sometimes a taboo topic and we do not talk
about it until it is too late in the sales process. We must do so right after discovering
the pain and early in the process to rule out the opportunity if the customer doe
not have enough.
• Discover the decision-making process: It is important to talk to the person who
will ultimately decide and, if it forms part of a complex decision-making process,
understand this process well in order to understand the role of each interlocutor.
• Present the solution that solves the pain: It is important to do so highlighting
the features or benefits that alleviate that pain.
• Reinforce the sale: It is important to understand that the sale is not closed with
the order and that the after-sales stage is important to customer satisfaction.
The following seven stages can also be established7, which bear some resemblance
to the foregoing:
1. Carry out prior research.
2. Stimulate interest.
3. Establish the major business problems.
4. Establish the “purchasing vision”, understand the value and the reasons for ad-
vancing the process.
5. Understand the organisation.
6. David H. Sandler, “You Can’t Teach a Kid to Ride a Bike At a Seminar”
7. Michael Bosworth, “Solution selling: creating buyers in difficult selling markets”
44 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
44
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
6. Gain access to the main decision maker.
7. Manage the product evaluation plan.
8. Negotiation.
9. Closing.
As regards the type of questions to ask in order to advance in the sales process,
these are8:
• “Situation”: Questions that help us to gather information about the opportunity.
• “Problem”: Questions that help us to define and identify the pain.
• “Implication”: Questions that help the customer to understand the severity of
the problem.
• “Needs-payoff”: Questions that make the customer confirm the suitability of the
solution we are proposing.
In “Strategic Selling”, four types of profiles are defined that always form part of a
complex sales process; they are people who must be identified and to whom we
must sell our solution and who, in turn, can impede or even torpedo our efforts if we
do not align them9:
• The “economic buyer”. The person who ultimately «signs» the order. They
have the capacity to agree upon terms and normally seeks financial return on the
investment.
• The “user buyer”. The person who›s daily activity will be affected by the solu-
tion. Their main interest is that the purchase makes their life easier and more
comfortable.
• The “technical buyer”. The person who evaluates the solution from the technical
viewpoint.
• The coach. The person who believes in the solution and who internally helps us
to advance, pointing out obstacles and helping us to navigate the organisation
and its policies.
Large organisations have evolved their sales processes from something in the hands
of a few decision makers to collective decisions, which in many cases have ended
up in “purchasing boards”. These purchasing boards have changed the rules of the
game in a way very detrimental to the interests of solution sellers by trying to stan-
8. Neil Rackham, “SPIN Selling: Situation Problem Implication Need-Payoff”
9. Jim Holden, “Power Base Selling: Secrets of an Ivy League Street Fighter”
45 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
45
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
dardise their purchases to the extent possible. Even so, sellers can be classified into
five types10,
• The hard worker.
• The lone wolf.
• The relationship builder.
• The reactive problem solver.
• The challenger.
The challenger-type seller would be more successful than the rest, especially in com-
plex sales environments, since they are capable of changing the rules of the game and
closing the sale outside of normal purchasing rules. To this end, they challenge and
question the preconceived ideas of the customer’s decision-makers, using in-depth
knowledge of the state of the art in their industry.
That is, the seller makes the customer look in their industry leaders’ mirror and convin-
ces the customer that buying safe will place them in a leadership position. To achieve
this, challenger sellers have the following three basic skills:
• Showing: The seller has expert knowledge of the situation of the industry and of
the customer’s competitors. They are capable of describing the main trends and
where the industry is going and builds a trust relationship with the customer from
a position of credibility and experience.
• Tailoring: Based on the customer’s needs and knowledge of the state of the art
and the market, this challenger seller is capable of designing an irresistible offer
for the customer and which, being unique, will be impossible to compare with the
competition.
• Taking controlling: This seller is capable of navigating the organisation and hand-
ling sales process times, involving whoever is needed and repeating the same steps
with each person with power to influence the decision-making process.
To conclude this module, it should be noted that the problem with startups is not
applying one or other sales methodology, but rather having basic principles on which
to base their sales management. These methodologies and many others which can
be consulted in the abundant literature on the subject, must at least be a guide for
building a method, even a basic one. And for us, their mentors, a kind of checklist for
identifying possible gaps.
10. Matthew Dixon and Brent Adamson, “The Challenger Sale: Taking Control of the Customer Conversation”
46 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
46
certification guidebusiness mentor madri+d
module 312+1 sales and startup myths. Sales techniques
3.4. Resources for deepening knowledge
Useful websites
• The Challenger Sale - https://en.wikipedia.org/wiki/The_Challenger_Sale
• Ten Types of Innovation -
https://www.amazon.es/Ten-Types-Innovation-Discipline-Breakthroughs/dp/
1118504240)
• Spin Selling - https://www.amazon.es/Spin-Selling-Neil-Rackham/dp/1565114205
• Power Base Selling - https://www.amazon.com/Power-Base-Selling-Secrets-Fighter/
dp/0471327336
• José Antonio de Miguel – http://yoemprendo.es
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
Tomás Otero Pino
48 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
48
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
4.1. Teaching goals
The main goals of this module are:
1. Learn to differentiate between commercial mentoring and other types of entre-
preneurial aid such as coaching, consulting and training in the commercial area.
2. Know how to analyse commercial problems and know what tool is best for each.
3. Know how to use mentoring ethically and properly in the commercial activities.
4. Know how to use mentoring to support the talent identification and attraction
process.
4.2. Introduction to the module
Each product or service we design has a purpose. The goal is to meet a customer’s
need. In return, we receive a consideration a priori of equal value. That is, in essence,
trade.
The simplicity of these phrases could lead us to understand the commercial process
as something simple, but we all know that behind these words is an intricate system
of influences, perceptions, emotions and behaviours that oblige us to plan each of
the stages of this process in detail.
An entrepreneur, in their enthusiasm about owning a business, has an idea that is
gradually materialised in a product or service, but if we want the project to grow sus-
tainably, they must begin to develop a marketing and sales plan that will allow them
to generate revenue.
Unfortunately, many entrepreneurs who work in technologically advanced areas do
not address the commercial function until the product is nearly finished or do not carry
out a sufficiently in-depth analysis of the weaknesses and strengths of the project until
it is almost in the marketing stage.
Even worse, many entrepreneurs only envisage the generation of revenue until the
public, private or own funds are depleted. This, in long sales cycles and moreover
in the technological area, can put the entire project at risk, due to which foresight is
essential.
It is true that many novel products do not seem to need preparation prior to mar-
keting. If the product is novel, easy to use and meets a specific and current need,
merely using it along with its rapid dissemination on social media will ensure a good
49 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
49
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
product launch. However, if the product meets a niche market need, requires a long
and tedious pre-marketing process, using influencer and opinion leaders to generate
favourable opinions or simply test market reality, it will need much more time.
The goal of this module is to reflect on the key elements of the commercial function
of any startup project in order to aid, via mentoring, the planning of the commercial
function, anticipating key elements, alerting of risk situations and recommending skills
that must be strengthened.
The Commercial Function
The commercial function includes a set of activities to take the goods or services
produced by the company to the consumer.
These include, namely:
• Commercial Planning. Definition of the Strategy.
• Market Studies. Analysis. Business Intelligence. Market Knowledge.
• Marketing. Opinion Leaders. Market Preparation.
• Sales. Reaching the Customer.
Each of these groups of tasks in turn has further tasks that must be performed to
properly understand the situation of the commercial function.
However, it is true that not all of these areas make sense in a company which has
just begun to operate. It should be noted that, the sooner the commercial strategy
is defined, in addition to the first steps for launching the product on the market, the
greater the information will be obtained and, thus, the better the decisions made.
This information is very valuable for anticipating future situations and reflecting on it
may help to organise ideas, re-work some or eliminate others.
Some key milestones of the commercial function and their relationship with other
modules of this guide are:
• Definition of the value proposition of the product or service (see section on
“Context analysis” in module 6, dedicated to the business model).
• Definition of target customers of the product or service (see section on “Context
analysis” in module 6, dedicated to the business model).
50 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
50
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
• Development of the channels through which the value proposition will reach
them (see section on “Go to market models” in module 7, dedicated to internatio-
nalisation of startups).
• Development of a network of opinion leaders to reinforce the message.
• Development of a sales network (see sections on “Go to Market Models” and
“Guide to defining an effective action plan with a value-added partner” in module
7, dedicated to internationalisation of startups).
• Definition of sales goals.
Among all these milestones, there are tasks that repeatedly generate problems if not
properly performed.
• Not having the right people.
• Not interpreting sales information properly.
• Not interpreting customer information properly.
• Not analysing the purchase intent properly (especially in long sales cycles).
• Not understanding the customer’s personal worries.
• Not putting a good price.
• Not choosing the best communication channel.
• Not writing business cases to verify the viability of each commercial action.
• Not ensuring the profitability of each commercial investment.
• Not creating expert panels to determine product perception.
• Not performing a proper SWOT analysis.
• Not measuring the impact of regulatory policies, regulatory frameworks and other
commercial development issues.
• Not forecasting properly.
• Not using good CRM, etc.
4.3. What is a commercial mentor?
A mentor is a person who has the role of trusted advisor, who helps, teaches and
shares wise advice. They assume a selfless role in a person’s learning, development
and success.
51 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
51
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
A mentor provides support
by offering information, advice and
assistance in a way that empowers the menteeJulie Starr
Within the commercial function, we could say that a mentor accompanies the
entrepreneur in the sales cycle and provides information, advice and assistance in
the face of adversity. A mentor must have something (knowledge or experience) that
the mentee desires to solve a commercial problem.
Therefore, a commercial mentor must have a firm grasp of sales cycles, sales proces-
ses and sales techniques in order to help the mentee solve a commercial problem.
A mentor must know how to analyse the challenge faced by the mentee, be capable
of identifying the best solution or tool for said challenge and wisely offer their advice.
The mentor does not sell for you
In commercial mentoring, it is very dangerous to become involved in the sales process,
since it is the mentee who must do the work. It is tempting for the mentor and the men-
tee to consider a shift in the mentor’s role towards a business development position.
A mentor does not sell: they accompany the mentee in the sales process.
4.4. What does commercial mentoring consist of?
Commercial mentoring has a similar structure to that of any other type of mentoring.
The following graph summarises four moments of the relationship:
Figure 5. Flow of the mentoring relationship.
ConsolidationDevelopment, flow
Beginning of the relationship
Preparation of the mentor
End of the relationship, separation
After the initial meeting, the mentor must have all the relevant information to know the
status and health of the enterprising project. At this initial stage the mentor must know:
• The emotional and motivational state of the entrepreneur.
52 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
52
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
• The financial status of the project.
• The technical status of the product or service.
Taking into account the key milestones of the commercial function indicated earlier in
this module, commercial mentoring is especially useful when it facilitates the develo-
pment of one or more of the following aspects:
a) Basic sales planning.
Sales have a technique and planning that depends on the product or service offe-
red. A mentor must have a broad vision of the sales process.
Concepts such as preparation of the commercial presentation, stages of the com-
mercial presentation and how to do a good closing. The definition of customer
potential, purchasing power, use of influencers, choice of territory, targeting, etc.
Additionally, the sales process requires strong convictions and resistance to frustra-
tion. The principles that guide a great seller are those shown from points b) to d).
b) Development of opinion leaders.
Among the influencers there are renowned and prestigious figures. These pro-
fessionals can act as opinion leaders. An opinion leader is not a mentor, but can
sometimes act like one. In any case, their main function is to say good things about
the product or service.
c) The Business Model, value proposition, SWOT/PEST.
These three concepts are key to the commercial function. The business model
must be perfectly defined and the marketing area will have prepared the value
proposition and have an appropriate SWOT/PEST. These concepts are reviewed
in modules 6 and 7 corresponding to the business model and internationalisation.
d) Commercial team members.
The foregoing must be planned, designed and implemented by the right persons.
Analysing the commercial profile of the entrepreneur or entrepreneurial team is
vital. This analysis must be performed as soon as possible in order to correct it in
the shortest possible time.
The commercial mentor must be familiarised with all these concepts because most
commercial problems can identify with these areas and, in the end, must serve to
ask the right questions:
53 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
53
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
Is there a clear commercial vision
behind the startup project?
Is the revenue generation
process clearly planned?
Are the right people
behind the commercial process?
Answering these questions must serve to address all the challenges that the entre-
preneur must overcome, from which they will choose the journey that on which they
will embark together.
The major challenges of the Commercial Function
The major challenges of the commercial function which, if not addressed appropriately,
can cause problems include:
• The development of the commercial vision.
• The process of the first sale.
• The definition of customer.
• The sales pitch.
• The search for opinion leaders.
Is mentoring the best tool for this challenge?
Once we have analysed the possible challenges facing the mentee, we must deter-
mine whether mentoring is the best tool for this challenge. In the commercial area,
there is debate about whether a seller is born or made, but it is important to determine
whether the problem can be solved through TRAINING, COACHING or MENTORING
or if, on the contrary, CONSULTING is required.
In order to help distinguish between all these tools, there are a series of questions
that must be asked in relation to the challenge:
Is there an evident lack of experience,
contacts or awareness in the commercial area?
YES, Mentoring
54 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
54
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
Is there an evident step or link
missing in the commercial, in the analysis,
something they miss?
YES, Mentoring
Is there an evident and real
barrier they cannot overcome?
YES, Mentoring
Differentiate mentoring from other tools in the commercial function. Internal or external mentoring?
It is important to remember some of the aspects of mentoring for entrepreneurs
included in module 2:
• As opposed to mentoring, in coaching the coachee is also responsible for their
own learning but the coach facilitates personal development and achievement of
goals with their communication skills.
• In training, the instructor is responsible for transferring the knowledge expected
by the trainee. It is normally used to teach a specific skill or knowledge. It is very
useful to learn sales skills.
• In consulting, the consultant makes changes or improvements that can provide
knowledge, but they alone are responsible for managing change.
• If the knowledge is transferred from another company or industry it is external men-
toring and, in the opposite case, internal mentoring. External mentoring makes it
possible to enrich companies and sectors, and a good example is cross-mentoring
between executives of companies from different knowledge areas.
Therefore, what must a commercial mentor not do?
• They must not teach sales techniques.
• They must not execute, implement or close any sale.
• They must not hold coaching conversations to improve skills.
A mentor is not responsible
for achieving a sale
When should commercial mentoring not be used?
• When you need to reflect on why you do not sell. COACHING.
• When you need to reflect on a leadership style. COACHING.
55 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
55
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
• When you need to improve customer satisfaction. COACHING.
• When you need to retain your team. COACHING.
• When you need to improve your commercial presentation skills. TRAINING.
• When you need to improve the impact of your presentations. TRAINING.
• When you need to prevent customer attrition. CONSULTING.
• When you need stress management support. CONSULTING.
• When you need to change the perception of the commercial work. CONSULTING.
• When you need to define the marketing and sales plan. CONSULTING.
• When you need to carry out a market study. CONSULTING.
So then, when DO we use mentoring?
Mentoring should be used when support is needed to perform the transition between
the mentee’s comfort zone to street selling, influencing others, making others see your
product as the product they need, helping to manage the mentee’s daily activity with
advice that will guide them in any situation they may encounter.
In mentoring we do not reflect, train or execute projects.
We accompany and offer our experience
to address any challenges that may arise.
4.5. The relationship between mentor and mentee in the commercial function
The commercial function is essential for any company. It is not necessary to dwell
on the importance of generating income which, in most cases, is achieved by selling
products and services. Therefore, the mentor/mentee relationship is based on one of
the functions that can give rise to both success and failure.
Also, the sales process is accompanied by two very strong mental responses. The
first, frustration; the second, insistence or persistence, or the “Yes, I can” attitude.
Frustration goes hand in hand with sales, since in most cases the sales process
consists of turning a ‘NO’ into a ‘YES’. Insistence is the key to success, but insisting
requires a mental fortitude that is not always there. The balance between mental
fortitude and resistance to frustration is key to selling.
56 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
56
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
For this reason, it is essential to do certain things properly when we do commercial
mentoring.
The mentor must accompany the entrepreneur in their journey and accompany suc-
cess and triumph, but they must be honest and clear in their mentoring sessions and
create clear expectations.
The mentor’s function is to help and be available at challenging times. For example:
• With specific experiences, knowledge or wisdom.
• With their position or status that the mentee can benefit from.
• With contacts or networks that they could introduce to the entrepreneur.
• With attributes that the mentee can learn (not be taught, not to be confused with
training). Related to social learning.
• Skills the mentee needs to learn.
But how?
• By sharing experiences, telling stories or viewpoints on topics of interest to the
mentee.
• By giving the mentee “space” to think (not to be confused with coaching).
• By offering constructive feedback.
• By giving advice.
• By sharing knowledge.
• By sharing influences or empowering the mentee.
• By sharing their contact network.
And this entire circle must be closed with benevolent harmony and respect between
the parties. According to Julie Starr, the main difference between mentoring and other
forms of aid such as coaching, consulting and training.
The mentor acts selflessly in their relationship with the mentee and this element is
essential for providing commercial support.
The opposite would be the case if, for example, the mentor receives a commission
for the sales they help to generate, or privileged information used for personal profit.
In all of these cases, the mentor/mentee relationship would not necessarily be one of
respect, but rather of self-interest.
57 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
57
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
4.6. What should a good commercial mentor do well?
A good commercial mentor invests time in the development of the relationship with
the mentee. This relationship must work as a connection in which communication is
honest and fluid.
A good mentor must always guide the conversation towards an environment
of constructive intentions and positive attitudes. They seek efficient conversa-
tions, with a certain focus, as the basis on which to clearly develop the relationship.
In order to better understand this concept, it is better to think of other incorrect for-
ms of communication, such as for example: complaints or dissensions. This type of
conversations do not contribute anything, while conversations with a certain focus
make it possible to find solutions and alternatives.
Conversations must also have a clear constructive intention, with a clear question
and an evident need. A good mentor must redirect inappropriate questions towards
a constructive and clear setting.
A mentor must always exercise a positive influence. The mentor’s function is to
help the entrepreneur. They must channel the conversations towards points where
there is a clear intention to solve a problem.
A mentor must always stay focused on the challenge to be overcome. They
do not get lost in frustrations and emotions.
A mentor helps to overcome barriers that impede progress. Since we form
part of the journey, we should collaborate therein. The aid can be provided through
advice, contacts or by sharing stories, books or accounts. Offering an invitation to
conferences.
What if the mentee does not overcome the challenges? The mentor’s role is
to help them overcome the challenge in the current situation, empower them for the
future and, above all, help people to grow.
4.7. The mentor’s role in the identification and attraction of talent
In the same way that the mentor serves as a guide in the development of the com-
mercial strategy, they actively attract talents. It should be noted that the necessary
marketing/branding to attract a potential customer or partner is similar to that perfor-
med to attract talent to the organisation.
58 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
58
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
For this reason, the mentor should help to create a culture and values that are attrac-
tive for the candidates and must not serve as the best recruiter or selection process
manager.
A mentor must help to develop a climate where innovation, uncertainty and develop-
ment are basic pillars and must recommend that these values be transmitted to the
market transparently.
In this environment, talent can be developed freely and with greater benefits for the
company.
With respect to competencies, the mentor must guide the entrepreneur in the develop-
ment of certain own skills -since the greatest talent is expected of them- in addition to
being clear about high performance standards. The following competences are impor-
tant for entrepreneurs and therefore for the people who work in a startup company:
• Proactivity.
• Resistance to frustration.
• Flexibility.
• Effective project management.
Proactivity forms part of the behaviours associated with initiative, with the ability to
pursue goals and achieve them and, above all, to maintain a high level of energy,
essential at the early stages of a business project.
Resistance to frustration is closely related to the above, so long as they do not
allow that energy and enthusiasm to wane over time, especially in the most difficult
moments.
Flexibility is explained as the ability to adapt to change, veer, pivot and re-work ideas
and projects. We must find dynamic people who do not fear change.
Effective project management is linked to success. We must find people with proven
success who have been capable of finishing things. To this end they assumed risks,
managed resources, assessed options and achieved goals.
4.8. Resources for deepening knowledge
Recommended readings
• Starr, Julie. “The Mentoring Manual: Your step by step guide to being a better
mentor”. Paperback (2014).
59 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
59
certification guidebusiness mentor madri+d
module 4Introduction to the commercial vision in a startup. Mentoring of the commercial function and for attracting talent
• VVAA. “HBR Guide to getting the mentoring you need”. Harvard Business Review
(2014).
• Covey Stephen R. “The 7 habits of highly effective people”. Empresa y Talento
(2011).
• Carnegie, Dale.”How to win Friends and influence People”. Simon & Schuster
(2012).
• Rodríguez Díaz, Julio. “Mentoring for entrepreneurs”. Fundación madri+d et al
(2012).
• Gitomer, Jeffrey. “Little teal book of Trust”. Financial Times Prentice Hall; Edición:
01 (2008).
• Gitomer, Jeffrey. “Little red book of Selling”. Bard Press (2004).
• Ries, Al y Trout, Jack. “The 22 immutable laws of marketing” (2003).
module 5Financial structure of a startup
Rosa Allegue Murcia
61 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
61
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
5.1. Teaching goals
The main goals of this module are:
1. Understand the basic financial structure of a company to understand the impact
of the entrepreneur’s decisions in each of the accounting and financial figures.
2. Learn to perform a global analysis of the risks in a company and its possible co-
verage (by means of insurance policies or other tools).
3. Know how to interpret a company’s annual statements to draw information and
conclusions that will give rise to powerful and valuable questions for the entrepreneur.
5.2. Introduction to the module
Knowledge of corporate finance is not only necessary to define a business plan or
seek capital, it is also the perfect companion for a good entrepreneur because it
helps them to maximise the liquidity and profitability of the project, helping them to
choose between different lines of business or projects, negotiate purchase prices with
suppliers or establish sales prices ensuring sufficient margins that will allow them to
cover all expenses. Additionally, basic financial knowledge reduces the risk of nonful-
filment of the applicable legislation, which will vary in accordance with the territory or
moment in which the company is created.
It is difficult for an entrepreneur to have a brilliant idea and also be an expert in mar-
keting, sales, finance, HR, taxes, etc. they will normally begin to manage their project
to the best of their own knowledge and will request the aid of experts as they grow.
In the case of financials, it is usually outsourced to a management company without
suspecting the risks it entails. At times we outsource for fear/ignorance and others
for contempt of financials, for considering them an insignificant administrative issue
for the business.
Countless times I have heard, to my surprise, the phrase “I have no idea..., my
management company will deal with it,” as if the company’s financial statements
were something banal. This is a serious mistake, the entrepreneur, for the sake of
their company, must be capable of understanding their business plan and reading
the statements provided by their management company in order to apply corrective
measures where necessary.
The mentor’s role is to firstly identify whether the entrepreneur knows
how the financials of their company work and, if not, advise and guide them
to use their common sense and, ultimately, help them to find an expert
who will provide assistance.
62 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
62
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
The entrepreneur needs information that will help them in the decision-making pro-
cess. This information is provided by accounting, which is why corporate finance has
been traditionally associated with accounting, although this is not completely true,
since finance encompasses much more than just accounting.
The usual finance-related questions are of the following type:
• Will a specific investment (e.g.: hiring employees) be successful?
• Where will the funds to finance it be obtained?
• Does the company have an adequate amount of money or access thereto (e.g.:
though loans)?
• To which customers should I sell on credit and how much?
• What amounts must be maintained in inventories?
• What is the optimal dividends policy?
• How will you balance risk with return?
5.3. Definition of the financial function
The company’s areas have traditionally been separated into two:
• On the one hand, the business area, which will focus on production, purchasing,
logistics, sales and marketing.
• On the other, the finance area, which supports the aforementioned areas, since they
all need financial resources to operate (selling implies collection and purchasing
implies payment).
Financials are an essential part of the company, since they imply the administration of
the company, which involves planning, organising, integrating, directing and controlling
to avoid mistakes and guarantee continuous improvement.
Figure 6. Company management.
Company
Administration
Planning
Orga
nisa
tion
Dire
ctio
n
Cont
rol
What will be done?Planning
Who will do it?Organisation
With what resources?Integration
How do i involve the employees?Direction
How do i correct deviations?Control
Continuous improvement
63 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
63
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
The finance function must add value to the company and provide information that
will help the entrepreneur in the decision-making process. It consists of planning, rai-
sing and using the company’s funds effectively. If there are excess funds, the financial
function will seek profitability, if there is deficit there must be financing.
Also, the financial function must guarantee compliance with the company’s legal and
tax requirements to ensure peace of mind for the entrepreneur, the investor and other
stakeholders.
In order to be useful, the information must be:
1. Understandable.
2. Relevant (forget about “peanuts” that make us lose time).
3. Timely (the time factor is vital, knowing the past barely adds value; it is much more
useful to predict the future).
4. Reliable (nothing generates greater distrust than erroneous data).
5. Comparable (in time, to follow evolution).
6. Economical (if obtaining the data costs more than the benefits of knowing them,
it is not worth the effort).
The available information must help us to provide a fair image of the company,
understandable to the entrepreneur and to third parties, which makes it possible to
answer the following questions:
Figure 7. Fair image of the company - Key issues .
Business Plan
Budget / P&L
Balance sheet
Results, KPIs
Corrective measures
Where do we want to go?
How do we get there?
With what resources?
Are we compliant?
Aren’t we on track?
Taxes, financial statementsAre we legally compliant?
64 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
64
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
5.4. Accounting: concept and classes
Accounting is in charge of quantifying, measuring and analysing the economic reality
of the company in order to facilitate its control and the decision-making process,
presenting information previously recorded systematically in comparable time periods.
There are two types of accounting:
General or financial accounting
Also called external accounting. It is aimed at presenting the company’s equity and
profit/loss.
It is a universal language which anyone with basic notions of accounting can unders-
tand and transcends the scope of the company, since it is mandatory to present it
officially according to the legally established formats (in the General Chart of Accounts
of each country).
Analytical accounting or cost accounting
Also called internal accounting. It is aimed at calculating the costs and margins of the
company’s different products, services and lines of business. It makes it possible to
determine the profitability of the different units or areas of activity.
There is no legal obligation to present this information.
The two types of accounting are complementary, they are only two different ways of
presenting the same information. The final result must be the same.
As startup mentors, we must ALWAYS request analytical accounting, since
it is the only type that allows us to understand the business, separate the
different lines of activity and analyse their profitability independently. If the
entrepreneur does not have this cost accounting (management companies
normally only offer the financial accounting mandatory by law), we must
explain its importance as a means of making predictions.
There are other types of accounting, such as Company Accounting, which is used to
record corporate actions such as mergers, acquisitions or liquidation of companies.
The information provided by accounting interests different groups of people. Both
external people such as:
• Shareholders who own the company and have risked their capital.
65 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
65
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
• Suppliers and investors interested in knowing if the company will be able to pay
its debts.
• The Tax Agency, for the possible tax implications.
This information interests the company’s internal managers as an instrument for veri-
fying its progress and allowing them to manage it more efficiently.
5.5. Basic axioms of accounting
The basic axioms of accounting are the basic accounting standards, which are stan-
dards or criteria established by the authorities or by professional accounting groups.
They are the so-called “Generally Accepted Accounting Standards”.
That is why these standards may differ from one country to another, such as the
expression US-GAAP, which are the “Generally Accepted Accounting Principles” of
the United States (PCGA in Spanish), also called International Financial Reporting
Standards (IFRS).
It is important to understand that accounting practices may vary widely from one
country to another, which can affect the company’s bottom line. Over time and as a
result of globalisation, accounting systems are becoming standardized and there are
increasingly fewer differences from one country to another.
Some of the basic axioms of accounting are:
• Double-entry concept, which gives rise to the famous expression of accountants
(“there must be a mistake somewhere, this doesn›t balance…” ). This concept
dates back to 1494 and was developed by the Franciscan friar Luca Pacioli. It
basically establishes that:
- One or more receivables must always equal one or more corresponding pa-
yables.
- Losses are debited and gains are credited; asset and expense accounts are
receivables; and liability, gain and equity accounts are payables.
- The sum of the debits must be equal to the sum of the credits.
- In all accounting entries, regardless of the number of debits and credits, the sum
of the balances must be the same.
• Concept of fair image. The accounting information must show the fairest possible
image of the company.
66 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
66
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
• Concept of personality of the company. The company is an autonomous entity
regardless of its creator, shareholders or owners. Entrepreneurs erroneously tend
to mix their personal equity with that of their startup.
As startup mentors, we must pay special attention to the concept of company
personality in order to distinguish whether the situation of liquidity shown is
that of the company or of the entrepreneur.
• Concept of going concern or continuous management. Unless there is relia-
ble proof that the company will stop working, business assets will be measured
in accordance with the going concern principle of accounting and not seeking its
liquidation value.
• Monetary concept. All accounting information is expressed in monetary units
(EUROS in Spain). The information will never be presented in physical units.
The most famous accounting principles are:
• Principle of prudence, whereby profit is recognised when it is certain, while losses
or risks are recognised when they are probable.
As a startup mentor, we must inculcate this maxim in the entrepreneur:
- You must have COMMON SENSE.
- You must apply COMMON SENSE.
- You must develop COMMON SENSE.
• Acquisition price principle, whereby all assets are recognised by their acquisition
or production cost price, regardless of its subsequent market value.
• Accrual principle, income and expenses will be allocated/recognised in accor-
dance with the actual flow of the transactions, goods or services, regardless of the
moment in which payments and collections occur.
• Principle of uniformity, whereby transactions must always be recognised in
accordance with the same criteria in order for the information to be comparable
over time.
• Matching principle, whereby the company’s bottom line consists of income from
a period less the necessary expenses for that income to take place, regardless of
the moment in which the income or expenses were accrued.
67 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
67
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
As startup mentors, we must clearly see the correlation between income and
expense. Otherwise, we will have an income statement per product line or
area of activity that will make it difficult to understand the business model.
The more we can “variabilise” costs to allocated them to each area of activity,
the greater the control we will have over the business.
• No-netting principle, whereby asset and liability items income and expense items
cannot be offset. These must be measured separately.
• Principle of relative importance or materiality, whereby some of the accoun-
ting principles and rules do not have to be strictly applied in those cases where the
materiality in quantitative or qualitative terms of the change that arises is scantly
relevant and, therefore, does not have a bearing on the fair presentation of the
financial statements.
5.6. Accounting documents
5.6.1. Basic accounting documents: Balance Sheet, Income Statement and Statement of Cash Flows
The Balance Sheet, Income Statement and Statement of Cash Flows are the result
of the entire accounting process, where the company’s transactions are inputs and
the accounting, process and accounting documents are outputs.
The Balance Sheet
The Balance Sheet shows the company’s assets and rights (ASSETS) and the com-
pany’s third-party obligations (LIABILITIES) or owners/shareholders (NET=CAPITAL).
They are jointly referred to as the BALANCE SHEET.
Applying the double-entry principle, ASSETS = LIABILITIES + CAPITAL
The Balance Sheet is a static document. It shows the information at any given time.
By studying the Balance Sheet of a startup we can, as mentors,
obtain an overall view of its liquidity.
The information shown in the Balance Sheet is organised by liquidity on the assets
side and by accountability on the liabilities side. The current and previous years are
always shown to compare their evolution.
68 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
68
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Figure 8. Basic structure of a company’s Balance Sheet.
Structure of the Balance Sheet (BS)
Non-current assetsBuilding lots
BuildingsFurniture/Machinery
Current assetsInventories
Trade receivablesCash
EquityShare capital
ReservesProfit/Loss
Liabilities to P/LBank loans
Liabilities to C/LPayable to Suppliers
Staff costsPhysical checks
Liquidity Accountability
-
+
-
+
P/L
C/L
C/L
P/L
As mentors, we will ensure that working capital (current assets less current
liabilities) is not less than zero, since this would imply liquidity problems.
The Income Statement
The Income Statement shows the company’s result (profit or loss) for a time period
such as the difference between income and expenses. It is also called Profit and Loss
Account (P&L).
As in the case of the Balance Sheet, the Income Statement of the current year is
compared to that of the previous year.
Applying the double-entry principle, RESULT = INCOME - EXPENSES previous year (N-).
By studying the Income Statement of a startup we, as mentors, can obtain
an overall view of the company’s profitability as a whole, but only through
an analytical Income Statement can we study the profitability of each line of
business.
69 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
69
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Figure 9. Basic structure of a company’s Income Statement.
Structure of the Income Statement (P&L)
Operating Income
- Cost of Sales
= Gross sales margin
- Staff costs
- Other Overhead / Administrative Costs
= Earnings before interest, taxes, depreciation and amortisation (EBITDA)
- Depreciations / Amortisations / Provisions (Reserves)
= Earning before interest and taxes (EBIT)
- Other Costs (Finance)
+ Other Income (Finance)
= Earnings Before Tax (EBT)
- Provision for Taxes
= Final Net Profit/Loss for the year
Cost effectiveness
• Important: When recognising income or expenses, never include VAT.
The Statement of Cash Flows
The Statement of Cash Flows of a company provides information about cash inflows
and outflows.
By studying a startup’s cash flow we, as mentors,
can observe its liquidity projections.
70 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
70
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Figure 10. Example of a basic Cash Flow table - Statement of Cash Flows.
Categories January February March ... DecemberTotal for the Year
I. Beginning Balance S1
S2
S3
S12
S1+S
2+
S
12
II. Total Collections C1
C2
C3
C12
C1+C
2+
C
12
• Sales
• Financial revenue
• Loans received
• Grants, donations and legacies received
• Disposal of non-current assets
III. Total Payments P1
P2
P3
P12
P1+P
2+
P
12
• Purchases
• Staff costs
• Taxes other than income tax
• Works, supplies and services
• Repayment of loans
• Taxes
Ending Balance (I + II + III) Sf1
Sf2
Sf3
Sf12
Sf1+Sf
2+
Sf
12
In order to perform a liquidity projection, we need the initial cash flow balance as a
starting point. It is also advisable to have historical data to see how the company’s
cash inflows and outflows (which are very different from the time frames agreed upon
with customers and suppliers,...). Next, we need an income and expense budget
(preferably in P&L format) to associate a collection date to each income and a payment
date to each expense in order to correctly take the information to cash flow.
We can distinguish between operating, financial and shareholder cash flow.
71 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
71
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Figure 11. Cash flows.
Operating assets
Trade and other payables
Shareholders
Operating cash flow
Financial cash flow
Shareholder cash flow
Considerations on cash flow:
The following must be taken into account for the projection of financial cash flow:
• The company’s financing needs.
• The company’s optimal Debt/Capital structure.
• The current financial and/or capital market conditions.
• Outlook of the company’s access to financial and capital markets in the future.
• Expectations on the behaviour of interest rates, devaluation and inflation.
• Minimum Debt Service Coverage for each business.
• Shareholder availability to capitalise now and in the future.
5.6.2. Financial Statements
Both international and Spanish standards, within the conceptual framework of the
2007 General Chart of Accounts, establish that Disclosures, Financial Statements or
Annual Accounts are the documents that include the financial information and are
aimed at meeting users’ needs in their financial decision-making process.
The Financial Statements comprise the Balance Sheet, Income Statement, Statement
of Changes in Equity (or SCE), Statement of Cash Flows and Notes to the Financial
Statements. These documents form a unit and must be clearly worded so that the
information provided is comprehensible and legible, presenting the fair image of equity,
of the financial situation and of the company’s results.
72 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
72
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
There are two financial statement models, normal and abridged, in accordance with
the number of employees, assets and revenues. Numerical items of two consecutive
years (current year and previous year) in both cases (normal and abridged) in order
to compare the information and study their evolution over time.
In accordance with the type and size of the company, the financial statements must
be filed at the Mercantile Registry and audited by an external auditor.
It is advisable that, as mentors, we request that our startup always keep its
accounting records updated and, if possible, in Spanish and English,
since a potential investor may require that information in
5.6.3. The Accounting Books (General Ledger and Journal)
The Journal is an accounting book in which a company’s economic events are recor-
ded on a daily basis. An economic event recorded in the Journal is called an entry;
i.e. all credit transactions are recorded therein.
Entries are records made in accordance with the double-entry system and contain
debit entries in one or more statements and credit in another/other statement(s) in
such a manner that the sum of the debits is equal to the sum of the credits. This gua-
rantees that the accounting equation is maintained. Also, there may be Accounting
Documents that group together various entries and these may in turn be assigned to
different financial statements.
The Ledger is a record of each of the company’s accounts. For example, SUPPLIERS,
CUSTOMERS, SALES or PROCUREMENT.
The information contained in these books is used to draw up the basic accounting
documents, the balance sheet and the income statement.
As mentors, is is advisable that we verify that our startup is up to date on its
accounting, because otherwise the information it provides us with may not be
complete or truthful.
5.7. Business cycles
In order to understand how the information flows in the company we must understand
the life of our startup, drawing a distinction between physical cycle, financial cycle
and accounting cycle.
73 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
73
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
The physical cycle is what is actually happening, asset exchange, the purchase and
sale of our product.
Next, we have the financial cycle, since any purchased asset must be paid and any
sale must be collected.
Lastly, we close the cycle with the accounting cycle, whereby each of these transac-
tions is recorded (always in monetary terms) with an accounting entry in the company’s
Journal. These transactions will be reflected in the Ledger of each of the affected
statements and lastly, depending on the nature of the statements, we can observe the
result of each physical transaction in the income statement, in the balance sheet or in
the statement of cash flows. If the transaction requires an explanation, it will appear
in the Notes to the company’s financial statements.
5.8. Financial ratios
Financial ratios are coefficients that provide measurement and comparison units
through which the ratio arising from multiplying two direct financial figures by each
other makes it possible to analyse the current or past situation of an organisation in
accordance with optimal level defined for it.
Figure 12. Financial ratio families.
Ratio Families
• Debt
• Balance
• Liquidity
• Turnover
• Rate of Return
• Growth
• Turnover
• Efficiency
Financial Situation Rate of Return Efficiency
There are a multitude of financial ratios that can confuse the entrepreneur. As a mentor,
it is advisable to focus the conversation on three key points:
• Difference between profitability and liquidity.
• Calculation of ROI.
• Average payment and collection periods.
74 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
74
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
5.8.1. Profitability vs Liquidity
Liquidity is the company’s ability to obtain liquid resources, through its operations, to
fulfil its commitments over time. It is CASH, understanding as such not only cash on
hand but also the assets or instruments that represent it, such as shares, bonds, etc.
Profitability is the ability to produce profit, i.e. when income is greater than expenses.
While they are both correlated in the long term (a company that is not profitable in the
long term will cease to have liquidity), in the short term they may differ widely.
The sale of a product may be profitable (when income is greater than expenses), but if
purchases (expenses) must be paid in cash and collections (income) are received 90
days from the invoice date, this profitable transaction will give rise to liquidity problems.
Or on the contrary, the company may have liquidity (with balances available in the
bank) but its business is not profitable.
As startup mentors, we must make the entrepreneur understand that they
must pay attention to liquidity, to the company’s CASH, since it is synony-
mous of survival. Entrepreneurs tend to forget tax payment dates, nonfulfil
payment and collection deadlines, etc.
It is advisable for the entrepreneur to define, prior to creating their company, what
capital they are willing to lose (maximum risk) and the deadline for verifying the pro-
fitability of their company.
5.8.2. Economic profitability. ROI
ROI or Return on Investment measures the company’s capacity to generate profit,
regardless of its financial structure.
It is calculated by dividing profit from operations, also known as EBIT (Earnings Before
Interest and Tax) among the company’s Total Assets, such as to leave the company’s
entire financial structure to one side.
Profit from operations * 100
ROI =
Total assets
However, what is interesting about this ratio is that if we break down the formula inclu-
ding sales in the numerator and denominator, we will obtain a much more interesting
reading for the company’s daily management.
75 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
75
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Sales Profit/Loss
ROI = x
Total assets Sales
If we take a closer look, the first multiplier indicates asset turnover and the second
indicates the sales margin.
ROI = Turnover x Margin
Turnover can be understood as the number of times that sales in the period reach
asset value. Therefore, a turnover of two indicates that sales in the period are equi-
valent to selling twice the asset value.
Margin indicates the wealth generated by each monetary unit sold. Therefore, a
margin of 10% indicates a benefit of 10 cents per monetary sales unit.
The breakdown of ROI reveals that we can optimise it by continuing to optimise tur-
nover and/or optimising the margin. Optimisation consists of determining what margin
and what turnover maximise the final result. It is not about maximising each factor,
but rather the product thereof.
As startup mentors, we must make the entrepreneur aware that
they must maximise the product of both turnover and margin,
in order to maximise their profitability.
5.8.3. The average Payment/Collection period
A way of improving the company’s liquidity is through the intensive control of payment
and collection periods.
The weighted average period of late payment is defined as the average number
of days a company takes to pay suppliers. The higher the value of this ratio, the
greater the delay in payment to suppliers, which indicates that the company is being
financed by them.
This ratio is studied together with average payment period. By analysing both ratios, we
can know not only a company’s financial statements, but also its bargaining power.
This information can be obtained from the company’s financial statements.
76 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
76
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Average supplier payment periods
Weighted average period of late payment = x 365
Purchases x (1 + VAT)
In order to understand the impact on the company’s cash, let’s look at this graph:
Figure 13. Cash Conversion Cycle (CCC).
5.9. Risk management, insurance
An essential part of the financial function is risk management. The creation of a new
company always entails risks and the financial function must do everything possible
to minimise them, since it is impossible to eliminate them completely. Risk is intrinsic
to business management.
A business risk is the uncertainty of occurrence of an event or action that may adver-
sely affect the company.
The first step to carry out in a company is a list of risks.
77 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
77
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Figure 14. Possible types of corporate risks.
Social Environmental
Economic Legal
Policies Technological
For each risk, the probability of occurrence and impact of loss, if it occurs.
The usual risks that are clearly reflected in the financial statements are:
• Risk of return of goods (e.g.: defective).
• Risk of payment default.
• Foreign exchange risk.
These risks will be recognised in the financial statements under “Provisions”.
There is also a risk of asset value loss (e.g.: over time, computers do not have
the same value as on the acquisition date). In accounting they are recognised as
“Depreciations”.
However, there are other risks that, while not being reflected in the balance sheet, may
generate a negative impact if they are not duly hedged by an insurance policy. They
include risk of infringing the Data Protection Law, management risk, fire or robbery
risk or civil liability risk. It is advisable to take out insurance if there is a high probability.
As startup mentors, we must verify that the entrepreneur has analysed
their risk and that they are duly hedged by an insurance policy and
recognised (as appropriate) in the financial statements.
78 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
78
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
5.10. Taxes
Taxes are levies, charges that must be paid to the Government to address public
needs. They can be direct or indirect.
Direct tax
That which is levied directly on sources of wealth, property or income, such as perso-
nal income tax (IRPF), corporate tax or personal income tax on rental income.
Indirect tax
That which is levied on consumption, such as value-add tax or VAT.
Taxes are usually settled with the Tax Agency on a quarterly basis for small companies
or monthly in the case of large companies. Death duties are settled annually in July,
notwithstanding the partial payments made during the year.
An entrepreneur must be able to differentiate between taxes that represent an expense
(and therefore affect the profitability and liquidity of the business), such as income
tax, tax on economic activities or property tax, and those that do not represent an
expense but do affect the company’s cash, such as payroll tax.
We must make sure, as startup mentors, that the entrepreneur has included
tax payments in their liquidity projections and that they understand the
consequences of taxes on their cash.
Note: Although it is not a tax, we must mention the social security payment made the
month after the salary payment. This includes the social security cost at the company’s
expense (which affects the profitability of the business) and employee contributions
(which only affect the company’s cash).
5.11. Due diligence
Many startups are involved in third-party acquisition processes. Before performing
the transaction, the buyer will want to verify that the value they are paying is fair. To
this end, they will carry out a due diligence, which is no more than an investigation
or audit of the company prior to signing the purchase contract with certain diligence.
To this end, it is vital to have updated and truthful financial information.
79 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
79
certification guidebusiness mentor madri+d
module 5Financial structure of a startup
Due diligence is a term commonly used in the sphere of business acquisitions to refer
to the process for finding information about a company. It includes aspects such as:
sphere of activity; future possibilities and perspectives of the business; and state of
assets and liabilities. In short, it is aimed at obtaining all the necessary information to
objectively assess and establish: the final price of a company acquisition transaction;
the way of structuring the transaction; and the demand for guarantees or, as the case
may be, the convenience of cancelling the purchase due to the detection of risks or
the appearance of new information.
5.12. Resources for deepening knowledge
Recommended readings
• Manzanera, Antonio Finance for entrepreneurs. Deusto SA Ediciones 2010.
• Introduction to Corporate Finance (Economía Y Empresa) Editorial Pirámide 2016.
• Torrecilla AS et al., Cost Accounting and Management Accounting. Edit. McGraw
Hill 1996.
• Brealey & Myers, Principles of Corporate Finance. McGraw Hill.
Videos and websites
• Finance for entrepreneurs https://www.youtube.com/watch?v=UPA1f6dY7OM
• Spanish National Chart of Accounts https://www.boe.es/boe/dias/2007/11/20/
pdfs/C00001-00152.pdf
module 6Development of the business model
Pedro Guerra Gutiérrez
81 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
81
certification guidebusiness mentor madri+d
module 6Development of the business model
6.1. Teaching goals
n many occasions, the entrepreneur has an idea they consider great as a starting
point for creating their company, but does not know where to go from there. At other
times, their project can progress reasonably but a strategy must be defined, to which
end they must structure their business model to achieve a consistent business plan
or to develop their discourse for potential investors. The challenge lies in presenting a
concept that is both easy to understand, relevant and intuitive, but without simplifying
the complexities of the business in excess.
A business model (BM) describes the logic whereby an organisation creates,
captures and provides value to customers.
All business models are articulated around three pillars [Lehmann-Ortega2014]:
• Value proposition.
• Value architecture.
• Profit equation.
We can understand the value proposition as a combination of the “What”, in the
sense of the attractiveness of the products and/or services, the “Who”, the customer
in the broad sense, and the price.
The value architecture expresses the manner in which the organisation develops
and delivers the value proposition for the customer and includes aspects such as the
internal and external value chain, tangible and intangible resources and key compe-
tences for implementing the value proposition.
The profit equation relates the sources of income and cost structure to capital needs
and tells us the prevailing parameters of business profitability.
82 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
82
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 15. The business model (BM) as a starting point for articulating a business plan (BP), in which the necessary resources for implementing the proposed business.
BP
BM
Operations
The business model (BM) is therefore an element previous to the business
plan (BP) that allows us to endow it with a common thread, giving it structure and
consistency, while providing us with the basic hypotheses on which to build a financial
plan and that must subsequently be monitored and validated. As mentors, we must
have the necessary tools to guide the mentee in their learning and development and
must be capable of asking key questions on which they must reflect throughout the
necessary process for transforming an idea into something tangible.
6.1.1. Conceptualisation process
The development of a business model must be understood as an iterative and
continuous process in which, within a given competitive framework, the pillars
supporting the business are developed, generating hypotheses that must be validated
and analysed in order to learn how to improve the model. There are many tools of
proven utility that can be used to carry out this process in an orderly and structured
manner which are advisable to know and, given the case, use.
83 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
83
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 16. Stages in the design and development of the business model. Different tools apply to each stage, such as SWOT Analysis, Empathy Map or Business Canvases.
Business CanvasTest
PESTSWOT
Value CanvasStakeholder Matrix
Customer Journey Customer Insights
Empathy Map
Business CanvasValue Map
Customer ProfileMVP
What are the most interesting channels? How will we reach customers? What
resources do you need
What are the trends? What is your position compared
to the competition? What are the main industry
players?
Is there a problem to be solved? What is the profile
of the affected parties? How is the sales process?
How is the current process?
What is our competitive advantage?
Is it sustainable? How do we solve the problem? What alternatives are
there?
Context Context Solution Market
Understand the opportunity Define idea VALIDATE IDEA
It is common practice to have a business plan as a previous step to implementing
practically any business. This plan describes the action plan for implementing an
economic activity that meets any market need and that follows a previously develo-
ped business model. Both are based on market and customer hypotheses that must
be constantly monitored to compare their validity and adjust both the model and the
plan. If necessary, the learnings must be such that it will be advisable to pivot1 in the
value proposition.
Experimentation, measurement and analysis are currently key factors in the
startup business model development and validation process.
Therefore, the placing on the market of a minimum viable product (MVP) [Ries2011]
becomes a tool in itself to refine and adjust the model, which makes it possible to
compare hypotheses on the context, the customer and the solution in the shortest
possible time.
As we will detail in subsequent sections, the MVP condenses a value proposition that
provides gains and mitigates pain for the customer, and which is placed at their dis-
posal in accordance with a business model conditioned by the existing environment.
The definition of the model seeks to maximise value for the customer and minimise
1. http://blog.strategyzer.com/posts/2015/7/23/the-pivot-6-situations-when-its-time-to-change-your-busi-ness-model-or-value-proposition
84 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
84
certification guidebusiness mentor madri+d
module 6Development of the business model
their pain. To this end, an iterative learning process is followed that will allow us to
better understand these sources of gains and pain, in which different hypotheses on
the model or on the customer’s needs are compared with reality.
Figure 17. Iterative development process and business model test.
Draw Hypothesis
Business Model
Extract Learning
Prioritise Hypothesis
Design Test
Prioritise Test
Execute Test
Zoom out
Zoom in
Customer proposal
Model
Environment
The object of this module is to provide the mentor and mentee with basic notions of
the tools currently used to carry out this process.
6.1.2. Analysis of the environment
When Analysing an idea and Understanding the opportunity it may represent, the
first step that the entrepreneur must take is to analyse the Environment in depth in
order to outline a first global strategy with which to approach the opportunity detected.
This analysis must be performed both at macro level, placing emphasis on economic
or social trends, and at micro level, studying the key and competitive aspects of the
sector in which the developing business is encompassed.
It is extensively studied by business and strategy scholars and experts who develop
widely known analysis tools. For example, a PEST analysis (or some of its variations,
such as PESTEL) allows us to structure an analysis of the global environment while a
model such as Porter’s Five Forces allows us to study the closest environment and
dissect competitive intensity in our industry. They are very versatile tools which apply
85 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
85
certification guidebusiness mentor madri+d
module 6Development of the business model
when creating a new company, structuring a strategic plan for the organisation or
analysing an international expansion project.
1. A PEST analysis is a strategic tool useful for understanding the cycles of a mar-
ket and the position or operational direction of a company. By way of reminder,
a PESTEL analysis (whose application to internationalisation will be discussed in
further detail in module 7 of this guide) includes the following factors:
- Political: Political regime, Government stability, Tax and business policy, Grants
or other economic incentives and Innovation policy.
- Economic: Factors of an economic nature that affect the market as a whole
(some sectors more than others). These include, namely: Economic cycle, Evo-
lution of GDP, Interest rates, Monetary supply, Price evolution, Unemployment
rate, Available income, Availability and distribution of resources and Level of
development.
- Socio-cultural: Configuration of market components and their influence on
the environment. That is, variables such as: Demographic evolution, Income
distribution, Social mobility, Changes in life style, Consumer attitude, Educational
level and Cultural patterns.
- Technological: State of technological development and its contributions to
the business activity. Its state depends on the amount of public spending on
research, Government and industrial concern for technology, Degree of obso-
lescence, Maturity of conventional technologies, Development of new products
and Speed of transmission of technology.
- Environmental: Environmental protection laws, regulation on the use of energy,
waste management,..
- Legal: Factors relating to government legislative regulation. For example: An-
ti-monopoly legislation, Environmental and health protection laws, Regulation of
foreign trade, Regulation of employment and Promotion of the business activity.
2. Porter’s analysis identifies Five Forces that determine competitive intensity and,
therefore, the attractiveness of a market. Porter refers to these forces as the mi-
croenvironment, to compare it with the more general term of exploration of the
macroeconomic environment. They refer to forces close to the company that affect
its capacity to sell to its customers and gain profit. A change in any of the forces
will normally require the company to reevaluate its strategic position relative to the
market.
Strategy consultants often use Porter’s Five Forces as a framework for evaluating
the company’s strategic position.
86 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
86
certification guidebusiness mentor madri+d
module 6Development of the business model
The Five Forces are:
• Bargaining Power of Buyers,
• Bargaining Power of Suppliers,
• Threat of New Entrants,
• Threat of Substitutes,
• Industry Rivalry.
Each of these forces has various associated determining factors.
Tabla 1. Force analysis factors.
POWER OF BUYERS
• Buyer concentration compared to seller concentration.
• Degree of dependence on distribution channels.
• Bargaining capacity, especially in industries with high fixed costs.
• Buyer volume (number of customers).
• Customer costs or facilities for switching companies.
• Buyer’s information availability.
• Existence of substitute products.
• Buyer price sensitivity.
• Differential advantage (exclusivity) of the product.
• Relative buyer percentage of overall sales.
• Backward vertical integration capacity.
• Total purchase price.
• Customer RFM analysis (Buys Recently, Frequently, Income Margin they leave).
POWER OF SUPPLIERS
• Evolution of prices related to substitutes.
• Uniqueness of supplier’s products or services (differentiation).
• Availability of substitutes for the supplier’s products.
• Degree of supplier concentration (market share).
• Acquisition cost in relation to product sales price.
• Quality differences.
NEW ENTRANTS
• Existence of entry barriers.
• Economic differences between products.
• Brand value.
• Switching costs.
• Capital requirements.
• Access to distribution channels.
• Absolute cost advantages.
• Learning curve advantages.
• Expected reaction.
• Government policies.
87 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
87
certification guidebusiness mentor madri+d
module 6Development of the business model
SUBSTITUTE PRODUCTS
• Buyer’s propensity to substitutes.
• Relative price performance of substitutes.
• Switching costs.
• Perceived level of product differentiation.
INDUSTRY RIVALRY
• Number of competitors.
• Industry growth rate.
• Intermittent overcapacity.
• Barriers to exit.
• Diversity of competitors.
• Informational complexity and asymmetry.
• Brand equity.
• Fixed cost allocation per value added.
• Advertising spending.
3. The analysis of the environment is usually supplemented by a SWOT analysis,
in which the company’s internal situation (Weaknesses/Strengths) relative to the
environment (Threats/Opportunities) is identified. In the case of a startup in the
seed stage, it would be impossible to perform an internal analysis of something
that does not exist. However, it would be relevant to apply it to the development
team in order to strengthen weaknesses and take full advantage of the strengths.
These analyses make it possible to establish the global strategy of the organisation
that best responds to the environment in which it moves.
Figure 18. The analysis of the environment provides information on the most convenient global strategy to be followed.
Global strategy: Costs or differentiation
88 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
88
certification guidebusiness mentor madri+d
module 6Development of the business model
There are two basic positionings that a company can adopt: low cost or differen-
tiation. The importance of an organisation’s strengths and weaknesses is, ultimately,
a function of their relative impact on cost or differentiation. These two sources of
competitive advantage, combined with the activities pursued by the company, lead
us to three general strategies with which to beat the industry:
• Cost leadership.
• Differentiation.
• Specialisation: Any of the other two previous strategies on a specific market
segment.
If we analyse this assertion from the viewpoint of financial profitability, the DuPont
Analysis of the breakdown of return on assets (ROE, Return on Equity) provides a
vision of where each strategy focuses. This breakdown integrates or combines the
main financial indicators with the aim of determining the efficiency with which the
company is using its assets, it working capital and the leverage factor. It equates net
profit margin of utilities, total asset turnover ratio and financial leverage:
ROE = net income / shareholder’s equity
ROE = (net income / sales) *(sales / assets) * (assets / shareholders’ equity)
ROE = (net profit margin) *(asset turnover) * (equity multiplier)
These components include:
• Operating efficiency: as measured by profit margin.
• Asset efficiency: as measured by total asset turnover.
• Financial leverage: as measured by the equity multiplier (between internal and
external resources).
89 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
89
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 19. Dupont model for key factors in ROE. Source: Wikipedia.
The company can obtain good returns by obtaining a wide profit margin over sales
or by managing its assets very efficiently. This is preferable if it is a perfect combi-
nation of both. A cost leading company is that which focuses on asset turnover
as a lever for improving profitability, while a company that pursues differentiation
focuses on improving margins by providing greater value to the final customer. This
is materialised in the key aspects of the business plan: a low-cost company would
focus on reducing current assets and the optimisation of operating costs would be
the differentiation element, while a company pursuing wide margins must focus on
aspects such as brand, customer relations a clear and differentiated value proposition.
A cost leading company focuses on asset turnover as a lever for improving profita-
bility, while a company that pursues differentiation focuses on improving margins,
providing greater value to the final customer.
Once the strengths have been identified and a basic strategy has been established,
an interesting tool for analysing the value proposition is the creation of the Strategy
Canvas, which summarises industry competitive factors and positions each compe-
titor on this axis, including substitute products.
The horizontal axis of the strategy canvas captures the range of factors that the indus-
try competes on and invests on, while the vertical axis is a rating scale that captures
the current state of play of key competing factors.
90 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
90
certification guidebusiness mentor madri+d
module 6Development of the business model
The value curve or strategic profile is the basic component of the strategy canvas. It is
a graphic depiction of a company’s relative performance across all its industry’s com-
petitive factors. A strong value curve has focus, divergence and a compelling tagline.
In the Blue Ocean concept [Kim2005], the empathy map (a tool discussed in greater
detail in preceding sections) is used to define new factors in the strategy canvas which
are relevant for a segment of the population and are not currently met, so that the
strategy canvas becomes a central diagnostic tool for developing a convincing Blue
Ocean strategy. It graphically depicts, in a single image, the current strategic landsca-
pe and future perspectives for defining a differentiated strategy. A Blue Ocean (BOS)
is created when new competitive factors relevant for the customer and not identified
by the competition are identified.
Figure 20. Depiction of a strategy canvas: for each of the competitive elements of a product/service, the elements of the offering level are compared to those of the competition and possible substitutes. Image of http://readingsraphics.com/
6.1.3. Customer analysis
Once we know the context, the competitive factors and have an idea of the product/
service, the key question to ask, no matter how obvious it may seem, is: Who is going
to buy it from us and why? It will not be the first time we hear that “my product is so
superior to those of the competition that it will sell itself.” The fact that a car is the
fastest accelerating from 0 to 100 km/h or uses the least fuel does not mean that it
is automatically on our wish list.
Identify and study the customer in depth to know what they value and why it is not a
trivial task. In fact, strategic marketing managers of organisations dedicate most of
91 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
91
certification guidebusiness mentor madri+d
module 6Development of the business model
their time to learning our customer’s current and future needs, locating new market
niches, identifying potential market segments, measuring the potential and interest of
those markets, orienting the company in search of those opportunities and designing
an action plan or road map for achieving the goals sought.
Empathy maps allow us to graphically describe and identify. This tool goes
beyond the typical demographic identification (age, sex, city, education, income, etc.)
and provides a first step towards segmentation of people according to their worries,
interests and preoccupations.
The aim of the map is to create a degree of empathy with our specific customer,
knowing their environment; in other words, see the world through their eyes. In-depth
knowledge of the person is key to designing our business model, since the product
or service must be aligned with customers’ needs. An empathy map must basically
answer the following questions:
• What does the customer want?
• What forces are motivating the customer?
• What can we do for these customers?
• Who are they really?
To achieve this, the map proposes six different areas which are detailed below:
1. HEAR – What is the person hearing from his or her friends, partner, colleagues,
etc.? Who really influences the person? How do they do it?
2. SEE – Who is the person surrounded by? To what type of offer are they exposed?
What type of problems do they face?
3. FEEL AND THINK – What emotions does the person express? What is really im-
portant to the person? What are their expectations? Take into account the person›s
beliefs and emotions that cannot be directly observed. Pay attention to their body
language, tone of voice and the words they choose.
4. SAY AND DO – What could they say to others? How do they behave in public?
Do they influence anyone?
5. WHAT HURTS OR FRUSTRATES them? – What are their main frustrations?
What risks worry them? What obstacles do they encounter?
6. WHAT MOTIVATES them? – What is really important to the person? How do they
define success? How do they try to achieve it?
92 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
92
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 21. Empathy map model.
In a first iteration, we can begin by completing the map on our own to create a theore-
tical profile. Next, we must go out on the street and compare it with reality, which is the
only way of putting ourselves in consumers’ shoes. Once we have a map of specific
customers, we can define a value proposition that meets their needs and solves their
problems. One of the things that these empathy maps will reveal is the existence of
groups of individuals with more or less identifiable profiles, i.e. market segments or
subsegments that we must analyse separately when designing a value-added pro-
posal for them.
As an additional tool for analysing the previous map, we can reorganise its elements
into quadrants with the following categories:
• Phrases and words.
• Actions and behaviours.
• Thoughts and convictions.
• Feelings and emotions.
Marketing tools such as customer journey, ethnographic research or focus groups
allow us to give this map greater value, making it possible to capture insights on unmet
needs or new value axes.
93 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
93
certification guidebusiness mentor madri+d
module 6Development of the business model
6.1.4. Designing a solution
With the help of empathy maps we classify and segment the market into groups with
common features. As a first step in the definition of the business model we must know
the customer in each of the segments, to which end we must create a customer
archetype for each segment.
We must bear in mind that the customer concept includes all the agents involved in
the buying process who, as accepted in recent marketing studies, may involve up to
five roles: the initiator, the influencer-advisor, the decider, the buyer and the consumer.
As the case may be, a single person can interpret various roles (or even all roles) or
each role can be interpreted by different people.
Tabla 2. Sales process roles. They are all customers in the model.
Role Function
The initiator
It is the first person who detects the need or considers the desire to acquire a product and considers the possibility. It can be the same person, who intends to buy clothes or a book for his or her own enjoyment. Or it may be another person: a man who asks his girlfriend out on a dinner date, or a expectant mother who suggests to the future father the need to start thinking about what baby carriage model to buy for their future son or daughter.
The influencer or influenced
It is a role that does not always necessarily intervene in a buying process, although it is becoming increasingly important. It is the person who gives us his or her opinion with respect to the product we are considering buying and suggests or recommends a specific model or brand. Their ability to influence the purchasing decision will depend on several factors: their credibility and authority, our trust in them, our previous knowledge (high, medium, low or null) of the product we are going to buy, our need or not to know the product’s technical specifications, etc.
The influencer may be a pharmacist who recommends a certain drug, a specialised motorcycle magazine or website if we want to buy a two-wheeled vehicle, or a couple who already has experience with children who advises us on a certain baby carriage.
The influencer role has gained traction in the world of digital economy. In fact, more than 60% of buyers currently seek information on the Internet before making certain purchases. In the digital world, an influencer may be a journalist, a specialist blogger,... or any other common citizen user who expresses their views in a forum.
The decision maker
As its name indicates, the person making the decision or rather “final decision”, in plural. Because he or she usually decides:
1. If the purchase will finally be purchased.
2. The specific product purchased (brand, model), taking into account different aspects that affect the purchasing decision (when to buy, at what time of year, at what price, how many units and (although not always) where.
The buyer
It is the person who finally makes the purchase. It may be the same person who made the decision or another person.
Therefore, they have a bearing on the purchasing decision. They may not decide on the purchase of the product or choose the model but can decide where, when and how (in cash, with deferred payment, in a physical shop, online shop, etc.) to buy it.
94 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
94
certification guidebusiness mentor madri+d
module 6Development of the business model
Role Function
The consumer (and evaluator)
It is the person who effectively consumes the product. They also have vital importance in the process because the consumer is, in turn, the evaluator.
And it is important to know that the consumer is not always the initiator or the decision maker or the buyer.
With regard to the customer, we must look at three things [Osterwalder 2014]:
First, it begins with a description of the “work” that these customers are trying to
perform in their daily life. It could be the work they are trying to carry out, the problems
they are trying to solve or the needs they are trying to meet.
Figure 22. Understand the customer by identifying the work in which our idea may be involved.
Tabla 3. Questions for analysing the different types of work.
Type of Need Questions
FunctionalWhat functional work is your customer trying to perform? (For example, performing or completing a specific task, solving a specific problem, etc.).
SocialWhat social work is your customer trying to perform? (For example, trying to seem good, gain power or status, etc.).
EmotionalWhat emotional work is your customer trying to perform? (For example, aesthetics, feeling good, security, etc.).
BasicWhat are the basic needs your customer is tying to meet? (For example, communication, sex, etc.).
When analysing the idea/product/service, we are interested in all the work performed
in their day-to-day life that may be related with it. This work may be conditioned by
the context in which it is performed. For example, it is not the same to want to call
someone from an airplane than from a train.
95 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
95
certification guidebusiness mentor madri+d
module 6Development of the business model
In order to understand the work, we must avoid stopping at a superficial vision and
ask ourselves why someone wants to carry out a certain task, since it may conceal
a broader task.
The next step for putting ourselves in the customer’s shoes is to understand their
frustrations and pain when performing their work. The empathy map provides
interesting information on their negative emotions, unwanted costs or situations that
the customer experiences before, during or after performing their work.
Figure 23. Understand the customer, sources of affliction .
Tabla 4. Possible questions for identifying sources of affliction .
Cost or effortWhat things does your customer find too troublesome? (For example, takes too long, expensive, requires considerable effort,...)
Frustrations What makes the customer feel bad? Identify what frustrates, bothers or gives them a headacheWhat common mistakes does your customer make? (For example, misuse,...)
BarriersWhat barriers prevent them from adopting a value proposition? (For example: initial investment costs, learning curve, resistance to change,...)
RisksWhat risks does your customer fear? (For example: financial, technical, social risks or what could go very wrong,...)
WorriesWhat keeps your customer up at night? (For example: major problems, worries, preoccupations,...)
Solutions that fall short
To what extent do current solutions fall short of your needs?(For example: lack of features, performance, malfunction,...)
DifficultiesWhat are the main difficulties and challenges your customer faces? (For example: understanding how things work, complexity of doing things, resistance,...)
Social aspectsWhat social consequences do customers fear?(For example: loss of prestige, power, trust, status,...)
We must classify each pain according to the intensity it represents for our customer.
It is very intense or very mild. Indicate the frequency of each pain.
96 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
96
certification guidebusiness mentor madri+d
module 6Development of the business model
Finally, we must describe the benefits the customer expects and wants (or that would
even surprise them), including utility, social benefit, positive emotions or time and/or
money savings aspects.
Figure 24. Understand the customer, sources of satisfaction .
Tabla 5. Possible questions for identifying sources of satisfaction .
SavingsWhat savings would make your customer happy? (For example, in terms of time, money and effort,...)
Quality
What results does your customer expect and what would go beyond their expectations? (For example, quality level, more of something, less of something,...)
the frequency with which it occurs.
Satisfactory solutionsIn what way do current solutions satisfy the customer? (For example: specific features, performance, quality,...)
SimplificationWhat would make your customer’s work or life easier? (For example: flatter learning curve, more services, lower ownership cost,...)
Social aspectsWhat social implications does the customer seek? (For example, make a good impression, increase their power or social status)
FeaturesWhat social implications does the customer seek? (For example, make a good impression, increase their power or social status)
AspirationsWhat do customers dream about? (For example: major achievements, great prominence,...)
Assessment criteria How do they measure success and failure? (For example: performance, cost,...)
DemandsWhat would increase the probability of adopting a solution? (For example: lower cost, less investment, less risk, higher quality, performance, better design,...)
97 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
97
certification guidebusiness mentor madri+d
module 6Development of the business model
We must classify each gain in accordance with its relevance to the customer. Is it
important or insignificant?
A common error is to mix work with benefits, where the former is the specific task and
the second is the ultimate result pursued or avoided. Similarly, the pains and benefits
must be limited insofar as possible, trying to quantify at what point discomfort turns
into pain.
Once we have put ourselves in the customer’s shoes, we must go back to our idea
of analysing in what way our offer will help them to undertake the tasks identified and
how we can add value through measures that will make it possible to mitigate pain
and maximise benefit. We must not forget that a product alone does not provide
added value.
When we adequately align the customer’s needs with the product, we can affirm that
we have a promising value proposition worth being developed.
Figure 25. Alignment between the value proposition and the customer profile.
Once we have resolved the alignment between the customer and the value proposi-
tion, we will have most of the elevator pitch prepared:
98 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
98
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 26. The alignment between the customer profile as structurer of an elevator pitch.
The market size is _______ and after investment _______, we may achieve a
_______ € in total revenues within _______ years, with the following indicators
(profitability, margin, EBITDA…).
6.1.5. Designing the model
In 2008, A. Osterwalder proposed a template for describing the business model,
known as the Business Model Canvas [Osterwalder 2010] which currently enjoys great
popularity. Subsequently, A. Maurya, author of Running Lean, extends the canvas to
adapt it to the needs of a startup.
It is a visual strategic management template for developing new business models or
for documenting existing ones. The template consists of nine key parts, common to
the graphic depiction of any business. Each of these parts is described below.
99 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
99
certification guidebusiness mentor madri+d
module 6Development of the business model
Tabla 6. Parts of a Canvas Model. Source: Business Model Generation, A. Osterwalder.
Customer Segments
The Customer Segments define the different groups of people or organizations an enterprise aims to reach and serve
Value Propositions
Value Proposition describes how products and services create value for a specific Customer Segment
Channels
Channels define how a company communicates with and reaches its Customer Segments to deliver a Value Proposition
Customer Relationships
Customer Relationships define the types of relationships a company establishes with specific Customer Segments
Revenue Streams
Revenue Stream represents the cash a company generates from each Customer Segment (costs must be subtracted from revenues to create earnings
Key Resources
Key Resources define the most important assets required to make a business model work
Key Activities
Key Activities define the most important things a company must do to make its business model work
Key Partners
Key Partnerships defines the network of suppliers and partners that make the business model work
Cost Structures
Cost Structure defines all costs incurred to operate a business model
These nine elements are organised in the template in such a manner that aspects
relating to value are aligned on the right and those related to business efficiency
are aligned on the left. The aspects relating to financial, costs and sources of income
are located at the bottom. As a work tool, it is useful when working on a whiteboard
or flip chart on which the team record their ideas and contributions using sticky notes.
The development of the canvas is based on the value proposition designed for the
customers seen in the preceding section, including the different roles in the pur-
chasing process and the different segments within each role.
100 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
100
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 27. The Business Model Canvas. A visual tool for developing and analysis business models. Photo of Strategyzer .
Following the logic of arriving at the value proposition from the market (PULL), the
first parts we must define are those relating to the channels used to sell our pro-
ducts and the mechanisms we use to connect and link all the agents involved in the
purchasing process.
Our business model must have the means to connect all the actors in order to effec-
tively communicate our value proposition and its advantages, particularly for those
profiles for which the proposal made provides real value. Simultaneously, we must
identify the essential aspects for the business as regards the distribution channels
through which we will reach the end consumers. We close the value side by identi-
fying the main sources of income in our model and whether it depends on the types
of customers, by associating them (for example, using arrows or colours).
In a second step we incorporate the elements of implementation efficiency to our
model, which include the key resources to be able to develop the value proposition,
the tasks/processes involved, the necessary partners and cost structure.
The implementation-related aspects can be a significant source of competitive advan-
tage in themselves, due to which it may make sense to complete this side of the model
with the alternative vision that provides us with a value chain analysis, where we will
highlight the key processes for our model, the position of the essential partners in the
101 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
101
certification guidebusiness mentor madri+d
module 6Development of the business model
chain and will detail the cost structure. In the subsequent development of the Busi-
ness Plan we will want to make an estimation of income and expenses to determine
financial parameters relative to business profitability.
Figure 28. The Value Chain (Porter, 1985) as a complementary element to the Canvas Model.
In the specific case of startups, where resources are particularly scarce,
the way of going to market is completely different to the execution strategy
of a consolidated company.
Particularising on startups have given rise to interesting methodologies such as those
described by E. Ries in Startup. Likewise, there are alternative proposals to the BMC
adapted to the particularities of the startup. A. Maurya’s Lean Canvas proposes a
change in focus that translates into modifying some of the elements of the model:
• PARTNERSHIPS is replaced by PROBLEM: A key aspect of any business,
especially a startup, is to be clear about the problem or problems it resolves, which
is why this block appears.
• KEY ACTIVITIES is replaced by SOLUTION: Similarly, and once the problem
is specified, it is advisable to define the main functionalities of the product that will
help to solve these problems.
102 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
102
certification guidebusiness mentor madri+d
module 6Development of the business model
• KEY RESOURCES give way to KEY METRICS: For any startup, it is absolutely
critical to define the three to four indicators that will be used to measure the Busi-
ness Model, a key element when pivoting, from the start.
• RELATIONS is replaced by SPECIAL/DIFFERENTIAL ADVANTAGE: This
block includes something that is very difficult to materialise, but which however is
key to any business.
In the Lean Canvas, the right side continues to represent the MARKET, but the left
side represents the PRODUCT (a more realistic work unit for a startup).
Figure 29. Lean Canvas.
103 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
103
certification guidebusiness mentor madri+d
module 6Development of the business model
Tabla 7. Parts of a Lean Canvas Model.
CUSTOMER SEGMENTS
Identify and learn the customer segments on which to work and, above all, strive to determine who could be your early adopters or visionary users.
This is of vital importance, since targeting the mass market with mature users is usually a bad idea for a startup, at least initially.
PROBLEMSIdentify the three main problems of this group and discover what alternative solutions to your product they use to solve them.
UNIQUE VALUE PROPOSITION
Summarise what makes you special and how you will help your customers to solve your problem in a clear, simple manner and in a single sentence.
SOLUTIONThe three most important features of your product/service that will help them to solve the problem... so you can focus on them and not lose time in secondary functionalities.
CHANNELSHow are you going to get your solution to the customer segments with which you are going to work: through a sales force? via a website?
INCOME FLOWS:How we are going to win money, which not only includes thinking about the different flows, but rather about margin, customer value, recurrence model.
COST STRUCTURE
Elements that create expenses.
Separate fixed costs from variable costs. In a startup, rapid growth can significantly drain economic resources.
KEY METRICSWe must establish what activities we want to measure and how, taking into account that we must generate a very small and actionable group of indicators that will then help us to make decisions.
DIFFERENTIAL ADVANTAGE
Establish that something that makes you special and different, that makes customers come back for more. If you can’t think of anything, don’t worry, leave it blank... you’ll know what it is in time.
Lean Canvas is better focused on online businesses since it adds the metrics
block which, while useful for any type of business, is totally indispensable for an
Internet-based business.
Designing the business model is part of the process, while testing and validating it
is the supplementary element. Marketing provides us with multiple tool for gaining
in-depth knowledge about the customer and draw powerful insights that will be inclu-
ded in our value proposition.
104 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
104
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 30. Testing as a basic element of the business model design process. Photo of Strategyzer.
6.1.6. Business analysis based on its model
The BMC has gained popularity in recent years, becoming more than just a passing
fad, due to its power to analyse new or existing business models in a structured,
flexible manner with great communication power. Likewise, it is useful for organising
a SWOT analysis or illustrating the organisation’s adaptation [Stan Abraham Strategy
& Leadership, 41(2) 31-38] capacity.
For example, it allows us to understand the key elements of a wide variety of busi-
nesses such as those shown below.
105 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
105
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 31. Examples of meta-business models [Osterwalder, 2010].
Although a marketing vision of the business model arising from the customer’s need
has been adopted up until now, the starting point of many startups (particularly those
arising from IPOs) is completely different, since it uses a certain technology and seeks
to find an adequate business model to market it.
106 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
106
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 32. Analysis flow with the Business Model Canvas in the event of a “technology push”. [Osterwalder, 2010].
Generic Models
Case Study
Free
Freemium
107 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
107
certification guidebusiness mentor madri+d
module 6Development of the business model
Generic Models
Case Study
Bait&Hook
In this scenario we need to carry out a double fit: on the one hand, identify unmet
needs for which this technology can provide a solution and design a value proposition
such a to make the available technology a keystone thereof. To this end, a possible
strategy is that of starting off by designing a possible value proposition for which we
select a customer segment that could be interested in this proposal and pay for it.
Once we have seen the customer segment, we will obtain its profile by identifying
tasks/pains/benefits and, from there, refine the value proposition to achieve a better
fit with the customer. This process can be repeated as many times as the number of
potential segments we identify.
In this type of scenarios, most of the value will stem from a modular product archi-
tecture in which the base technology is covered by a range of additional products and
services that will extend the application of the product and which will allow us to cater
for a wide range of customers, from a customer seeking the minimum solution with the
lowest cost to the customer seeking an all-inclusive solution, in order to capture the
greatest possible value of the technology. It is becoming increasingly common to use
a collaborative approach to design these products, whereby collaborator ecosystems
contribute to enrich the product and service offering. The importance of modular archi-
tecture in the internationalisation process is reviewed in the corresponding module.
108 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
108
certification guidebusiness mentor madri+d
module 6Development of the business model
Figure 33. Extended product design.
6.2. Key questions for the mentor
The goal of this section is to endow the mentor with some tools with which to struc-
ture their thoughts in order to understand and analyse the business proposed by the
entrepreneur. Instruments that will allow us to ask the mentee the key questions that
will induce reflection.
We start by analysing our environment both at macro (trends, political, economic and
legal issues,...) and sector-specific level.
What relevant restrictions does the environment impose on us? Drawbacks
What aspects are key in this market? Peculiarities
Who is the competition? Current, potential and substitute
In the next step we must define the value proposition, that differentiation and cha-
racteristic element around which the entrepreneur’s proposal will be articulated. With
this idea in mind, we must now move to the potential customer side to determine the
effort made by the entrepreneur to understand their customers. This effort represents
the first litmus test for the entrepreneur to compare to what extent their proposal pro-
vides sufficient value and, in such case, refine it in accordance with the customer’s
specific needs.
Who are the customers? What do you think you know about them? Data?
What do you offer them? How does our proposal meet their needs and
frustrations? What is the key aspect of the value proposition for each?
109 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
109
certification guidebusiness mentor madri+d
module 6Development of the business model
At this point, we must delve deeper into how the entrepreneur plans to capture the
value of their proposition. By directing the conversation towards the development of
a sustainable and profitable activity.
Have you developed a business model that makes it possible to articulate a
sustainable solution?
Is it the only possible solution? Does the model meet their needs?
Have you delimited the sources of income? Do they meet the business’s
needs?
How is income and expense scaled in the business?
What volume of activity do you need to reach the break-even point?
How long will you take to reach this point? How long does it take to complete
that journey?
Have you prototyped your proposal? Have you tested it? Have you generated
metrics? How do you create the platform effect?
Business plan... business plan... business plan
6.3. Resources for deepening knowledge
Recommended readings
• Michael E. Porter, The Competitive Advantage: Creating and Sustaining
Superior Performance. NY: Free Press, 1985.
• W. Chan Kim y Renee Mauborgne , Blue Ocean Strategy: How to Create
Uncontested Market Space and Make Competition Irrelevant Harvard Busi-
ness School Publications, 2005
• Alexander Osterwalder & Yves Pineur, Business Model Generation, Wiley 2010
• Eric Ries, The Lean Startup: How Today’s Entrepreneurs Use Continuous
Innovation to Create Radically Successful Businesses Portfolio Penguin 2011
• Laurence Lehmann-Ortega, Helne Musikas, Jean-Mark Schoeettl. (Re)inventez
votre Business Model, Dunod 2014
• Alexander Osterwalder et al, Value Proposition Design, Wiley 2014
Additional readings
• Harvard Business Review (an anthology) Rebuilding Your Business Model (Har-
vard Business Review Press, 2011).
• Mark W. Johnson, Seizing the White Space: Business Model Innovation for
Growth and Renewal (Harvard Business Press, 2010).
110 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
110
certification guidebusiness mentor madri+d
module 6Development of the business model
• Saul Kaplan, The Business Model Innovation Factory: How to Stay Relevant
When the World Is Changing (John Wiley & Sons, 2012).
• Joan Magretta, Understanding Michael Porter: The Essential Guide to Com-
petition and Strategy (Harvard Business Review Press, 2012).
• John Mullins and Randy Komisar, Getting to Plan B: Breaking through to a
Better Business Model (Harvard Business Press, 2009).
• Richard P. Rumelt, Good Strategy/Bad Strategy: The Difference and Why It
Matters (Crown Business, 2011).
• Ash Maurya, How to document your business model (The lean canvas),
available online at https://leanstack.com/businessmodelcanvas/, accessed on 10
October 2016
• A. Croll & B. Yoskovitz, Lean Analytics: use data to build a better startup
faster, O’Really
• Andrea Ovans, What is a business model? at Harvard Business Review 23
January 2015, last web access on 20 May 2017 https://hbr.org/2015/01/
what-is-a-business-model
• A. G. Lafley, Mark W. Johnson Seizing the White Space: Business Model Innova-
tion for Growth and Renewal McGraw-Hill Education ISBN-13: 978-1422124819
Useful Websites
• https://strategyzer.com/
• https://www.blueoceanstrategy.com/
• https://hbr.org/2013/05/why-the-lean-start-up-changes-everything
• http://www.odyssey314.com/en/
module 7Mentoring for internationalising a startup
Julio Fernández-Gayoso Mediero
112 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
112
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
7.1. Teaching goals
Introduction
At some point all startups consider internationalisation, which offers major oppor-
tunities but also multiple risks. This module aims to provide practical guides to help
think about and plan this important decision. To this end, we will use “questions” to
help us to reflect, since the obvious is often not so obvious and invalid or unrealistic
assumptions can be made.
1. First of all, an internationalisation plan does not have nor should have a “cut and
paste” plan that we have executed in our country of origin. In fact, it is likely that
some elements such as the commercial or Go To Market (GTM) model must be
different.
In order to develop and analyse our options, we can use different tools to develop
our internationalisation plan and even combine them, since they each provide an
angle, a strength that complements the other. Just to mention some of the most
well known, from the most traditional to the 7Ps Marketing Mix, the MacKinsey
7-S model and the Business Model Canvas methodology, so popular nowadays,
and analysing the module against the business model.
We will use the tool we use in our international plan. It does not necessarily have
to be the same as that of our country of origin and it is certainly not advisable to
rush headlong into an internationalisation strategy without previously assessing the
different options, their risks and opportunities. The country risk must be assessed
and, accordingly, propose “the Distances” model, as well as other tools such as
PEST. It is also important to evaluate the different growth and expansion models
and their alternatives, assessing in turn whether our business systems and pro-
cesses are ready for internationalisation, for example: support for different Zs
We also know that other factors, such as corporate culture and management and
leadership styles with multicultural teams, can be a good lever for change or, on
the contrary, for blocking, if that corporate culture or management styles are not
properly integrated in the country where we want to expand our business.
In addition to financial projections, market potential and our forecasts must be
realistic. We know that, on paper, a business plan supports everything, but inter-
national expansion is usually more complex than the launch in our country of origin
and it is not convenient to rush headlong into it without a well-test plan that not
only assesses the risks and opportunities of the country or industry, but also the
time factor for executing the plan and necessary economic and financial costs. A
bad international plan not only puts the company at risk in the country, but is also
a brand/company image factor that may be irrecoverable.
113 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
113
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Figure 34. Product life cycle and launch in a new country.
2. Secondly, the life cycle of our product and the maturity and presence of
our brand in our market cannot automatically be translated into another market.
In fact, it is important to know that our brand presence in the new country starts
from scratch. This, while seeming evident, is usually one of the most frequent
mistakes. For this reason, in our internationalisation plan it may be critical to start
on the basis of an existing customer with subsidiaries in other countries and which
allows us to start not only with an economic activity but also with a commercial
reference. This strategy can be considered a good practice for commencing new
operations, reducing our risk and commencing with commercial references in the
country from day one.
After this introduction and preliminary considerations, we will now proceed to develop
the proposed methodology by answering the following four key questions:
Figure 35. Internationalisation methodology: the 4 questions.
4) How should I internationalise the
company?
3) When should I internationalise the
company?
2) Where should I internationalise the
company?
1) Why and for what reasons should I
internationalise the company?
114 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
114
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
7.2. Question 1: why and for what reason(s) should I internationalise the company?
This may seem a rhetorical question with a very evident answer: a company is interna-
tionalised to increase its billings and its profit. But this may be only one of the reasons.
There are many others and also very significant, due to which their definition will mark
the type of expansion plan we need.
The reasons for internationalisation must not only consider the market options -i.e.
the countries we will approach-, but also “how”. This is why it is critical to understand
our goal from the start and define the “why” and the “what for”, in order to correctly
align the plan.
Figure 36. Reasons for internationalisation.
Follow a customer or
partner
Country of growth or reference
Diversify risks
Technological ecosystem
Access to natural resources
Cheap manufacturing
Access to capital markets
Countries as an entry platform to
a continent
Why and for what reasons?
For example, it is not the same to expand to a country because we need to support
an existing customer -in which case we will probably start off with a minimum support
structure- or because there is great business potential, which requires a more far-rea-
ching commercial and business approach. Also, there may be situations such as the
2009-2012 economic crisis in Spain, when some companies decided to target new
markets as a way of diversifying and balancing the country risk.
115 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
115
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
But there are other reasons for internationalisation, linked either to the manufacturing
ecosystem or to the production of mobile phones in China or due to the potential
resources, either of raw materials or cheap manufacturing. There may also be other
reasons related to human resources, to the knowledge and skills of the softwa-
re development and testing staff: this is usually common, for example, in software
development in India or in Eastern Europe. There may also be other reasons linked
to the environment -for example, to the technological ecosystem- in the technology
startups world. Silicon Valley in California or Seattle for the Microsoft ecosystem are
usually options to be considered in order to be well-connected to these ecosystems.
At other times, the target country, in addition to having good potential in itself, provides
a good platform for entering a region or continent. A very clear example of this scenario
in Europe is the United Kingdom or Ireland, with the opening of a subsidiary in these
countries as a platform for US companies to enter the European market.
And there may be many other different reasons with different implications depending
on the industry. For this reason, it is critical to properly understand why and for what
reason, since the answer to this first question would be critical to answering the
following three questions of our methodology in order to define the plan.
These are some of the important reasons or factors for internationalisation, but this
list is in no way intended to be comprehensive, since it depends on the sector and
industry.
7.3. Should I internationalise the company?
Some questions for reflection:
• What three countries should I choose?
• What selection criteria should I consider?
• Or maybe, should I approach expansion to all the countries and industries of the
world in a single movement?
Let’s see some of the criteria to be considered in the model I call “the
Distances”:
116 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
116
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Tabla 8. Some criteria to be considered in “the Distances” model.
The basic concept is simple but effective::
• The shorter the distance (geographic, economic, cultural, regulator) the lower the risk in the international expansion decision.
1. Distances - cultural differences;when these are similar, customers will request similar products to those of our country, in addition to product requirements.
2. Distance - geographic, China, USA. Which would imply high transport costs and wait times, which are factors to be considered.
3. Environmental - administrative - regulatory distances, commercial practices, foreign currency.
4. Economic distances:
• Market size - for example, China or USA
• Market growth, for example, China
• Purchasing power - price elasticity curve vs consumer purchasing power curve - market size and maturity. Product price requirements in that market.
As a general rule, entering markets with less limitations in these “four distances” will
reduce our internationalisation risks, allowing us to maximise the probability of success
if there is business potential.
PESTEL Model
What tools do I have to assess the risk-opportunity of a country and its suitability as
an investment? There are different tools, one of which is the PESTEL (Political, Eco-
nomic, Socio-Cultural, Technological, Ecological and Legal) methodology which, as
a peculiarity of its application to the environmental analysis, provides a simple way to
perform a country analysis.
Given the number of geographic alternatives to expansion, selecting the country pre-
viously using the economic, geographic or cultural distances model makes it possible
to considerably simplify the analysis in order to subsequently perform a PEST analysis
once we have defined the country or sub-region to be approached.
117 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
117
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Figure 37. PESTEL analysis factors.
Political
Economic
Socio-Cultural
Technological
Environmental
Legal
PESTEL
What is the PESTEL Analysis applied to internationalisation?
The goal is to define whether a country is attractive, what is its potential and its pos-
sible risks. In the same manner that Michael Porter’s Five Forces model allows us to
analyse an industry, PESTEL allows us to analyse the following country factors:
• Political. The political and regulatory stability of the country or of local gover-
nments. Public government grants for investment and their taxation, laws and
regulations. In addition to international trade agreements and their impact.
• Economic. It includes various dimensions: market size, growth and opportunity,
economic cycle, stability and growth, and GDP outlook; the country’s consumer
profile, its population segments and purchasing power; and potential competitors,
changes in the industry, economic factors and consumer preferences.
• Socio-Cultural. Languages, good or bad commercial practices such as corrup-
tion, religions, human rights, cultural practices, population pyramid or changes in
birth rate. Changes and differences in purchasing preferences and habits.
• Technology. This is an important point: although the globalisation phenomenon
exists, there are differences in purchasing parameters depending on each country
and the speed of change is increasing. For example, the mobile and mobile appli-
cations phenomenon is global, but the implementation of mobile devices is differs
depending on the country, on its purchasing power and on the consumer’s profile.
118 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
118
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Likewise, there are technological regulations that impact each country. Robotisa-
tion, automation and mechanisation provide improvements even in countries with
cheap labour. Another important dimension for some industries is technology and
the energy mix of each country. In this section, it would also be appropriate to
consider three dimensions:
- New product design and production methods and technologies.
- New product and service distribution methods.
- New digital communication methods.
• Environmental. This factor has increasing bearing: on the one hand, consumers
have increasingly greater awareness and consider that this factor differentiates a
company’s brand image. On the other, laws and regulations, the energy system
and its implications are factors to bear in mind, especially if our sector has pollutant
implications. They are all factors to be taken into account.
• Legal. This includes all the legal changes and regulations that limit or condition our
sector and business, either positively or negatively. Additionally, factors such as the
protection of intellectual property -licensing models and their legal security must
be considered- and laws on protected or regulated industries and occupational
safety and health laws.
Benefits of the PESTEL Analysis:
• Identify the country’s opportunities/risks.
• Implement appropriate practices by country: both product and management -pro-
cesses, people-, etc.
• Think and analyse without assumptions or prejudices of our country of origin.
• Three key steps for performing a PESTEL analysis:
- Identify adequate factors that will impact my business.
- Assess how the different factors affect our operations, for example, product
regulations and financial or accounting regulations or standards.
- Develop adequate strategies in a country-cluster scheme. For example, entry
into the European market with base in Ireland or Great Britain, for example entry
into Europe from the USA.
7.4. Should I internationalise the company?
When should I internationalise the company? This is another question critical to the
success or failure of the design of our internationalisation plan.
119 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
119
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
The maturity of the product and services, the fact that our management systems
and processes will be ready to support internationalisation, and the economic and
financial soundness to undertake expansion will be key. Next, we will describe some
of the factors to be considered.
Some guidelines before undertaking international expansion:
• Consolidation of market position in the country of origin. It does not make
sense to rush headlong into international growth if we still have strong potential
in our country of origin and we have not yet tested the benefits of our product or
service in our own country. In general, it is easier to grow in our country of origin
than in other countries where expansion adds risk factors that we must measure.
• Sound financial situation, either due to growth in operations or external invest-
ment, for example through Venture Capital (VC), etc. International expansion requi-
res significant investment and the time factor for earning profit in the new market is
measured optimistically, underestimating the time required to earn profit.
• Growth strategy and growth forecast, both of the product and of the industry
and its situation in the life cycle. For example, the DVD or Blu-Ray market in an
online content consumption market with new competitors such as Netflix-type
online content service. In this connection, we must answer questions such as:
Where is our product in the industry life cycle? Is our product a star, a cow or a
dog? They are important for determining whether we are in a market that is at the
beginning or end of a cycle.
• Systems and processes: It is necessary to know how many systems and pro-
cesses are ready to support an operation in this new country:
- Invoicing systems, new legislation of the new country, multi-currency support.
- Legislations and regulations impacting both the physical product and the sof-
tware or associated services.
- Location, language, technical regulations, support structure.
- Changes in timetables, type of work week, such as for example the differences
between the Arab and European worlds, foreign currencies and their exchange
rate-risk, languages, etc.
• Once we have sufficient product maturity and modular product architecture,
value will be created that will leave space for the added value chain.
Packaging the product with value layers
• What type of product do I sell? Is it a manufactured product that implies distri-
bution and storage? Or is it online software, gaming or services?
120 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
120
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
• Price strategy: What is the monetisation model? And how do we integrate a
possible distribution channel, preferably convincing the partner to contribute value
to the solution?
• Do we have a packaging model and price structure that leaves room for
value-added partners?
• Modular product architecture + services designed to integrate partners in value
creation (Software or Services). As we saw in the module relative to the business
model, a product architecture that consciously leaves room to the value-added
channel to create value is a clear success factor to build loyalty in that channel. It
makes it possible to generate value with low margins, making it possible to build
value on our platform. This will allow us to build loyalty in the channel and develop
an ecosystem of dependence and mutual collaboration. Therefore, the success of
the product depends on the channel and vice versa. In this scenario, value capture
is linked to the incremental value added, not only to the commercial margin of the
distribution channel.
• Also, the degree of internationalisation of a company can be measured by means
of different indicators including, namely:
- Relative international billing - external vs total billing-.
- Number of countries in which the company operates.
- Number of affiliates and subsidiaries of the company.
- Employees abroad vs Total.
- Structure of the internationalised processes: manufacturing, sales, logistics,
support or customer care.
- Assets in external balance sheet vs total.
Likewise there are other, more complex indicators such as TNI or “Transnationality
Index” - World Investment Report 2002.
7.5. Question 4: How should I internationalise the company?
In this section we will analyse four topics we consider of utmost importance to delve
deeper into HOW to implement an internationalisation strategy:
• Types of internationalisation.
• Market entry models - “Go To Market” (GTM).
- Guide to defining an effective action plan with a value-added partner.
121 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
121
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
- Focus marketing efforts on a segment/industry or solution: The “Crossing the
Chasm” model.
• Organisational culture and leadership styles in internationalisation.
• Remote team management and leadership techniques and what remote commu-
nication and collaboration tools I have.
Figure 38. Uppsala Internationalisation Model.
Subsidary in the country
M&A?Joint Venture
PartnerAgent export
modelecommerce export model
No export
There are different models that support internationalisation criteria, with an incremental
and gradual approach such as the Uppsala model, which considers internationali-
sation as an incremental process of integration and accumulation of processes and
knowledge. For example, a process could commence, as shown in the figure, with
“No export” and would move to “Progressive export” from our central headquarters.
Many of the startups backed by the Fundación madri+d mentoring network, 69% of
the total, are positioned in this scenario. (Ref. NTBCs 4. New technology-based com-
panies: determining factors of entrepreneurship, characterisation, internationalisation
and strategic process).
Thirdly, the Uppsala model proposes an incremental model, for example, based on an
agent or partner in the target country or in a potential joint venture at a more develo-
ped stage. At a subsequent stage, a proprietary subsidiary could be developed if the
business plan and return on investment are fulfilled. The NTBC study on new tech-
nology-based companies indicate that 23% of New Technology-Based Companies
(NTBCs) access markets based on this scenario through partnerships in their different
versions (partners-licensors, franchises, management contracts) and only one of the
companies analysed with 8% of the total has a subsidiary. This indicates that the
progressive export model potentially using an e-commerce model, where possible,
represents one of the most common scenarios; and that the second most-used model
is a partner or third party that represents the company in the country.
As we will see, this last model has many advantages due to the agent’s or partner’s
knowledge of the market. The existence of commercial contacts in the local market
and knowledge of the commercial practices of the target market turn this agent into
a real competitive advantage for international expansion. In this regard, the selection
of the correct agent-partner is a critical decision.
122 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
122
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
It is also evident that there would be greater advantages the further right we are in
the Uppsala model, but also commitments in the form of exit barriers and costs of
this market in the event that the project goes wrong. Therefore, ensuring invest-
ment progressively parallel to growth and return on investment minimises the risks
of expansion.
Mention must also be made of the importance of technologies in digital transforma-
tion, that make it possible to access remote markets in a centralised manner through
technologies such as the cloud, big data and social knowledge networks, which allow
potential customers to make basically online decisions, based not only on information
about the product-solution. New technologies that offer digital transformation also
enable electronic internationalisation at very reasonable costs.
7.5.1. Types of internationalisation
• Multi-domestic: treatment of each country as a different model with different
product features. There is differentiation of the product and of customer demands
in relation to location, support, etc.
• Global: one market: the world
- An example of this are born-global Internet companies.
- It should be noted that, in this case, born-global Internet companies require
mass location investment, due to which expansion is staged even in these
scenarios.
- Another example in the industrial world are aeronautical markets, with products
that in essence are the same for everyone, even if they include customisation of
the final product, in addition to their global investment and operations.
- Locating part of the product is usually a necessary factor, either due to regula-
tions, language, etc.
• Product-market arbitration: For example:
- Manufacturing costs in China.
- Quality software engineers at very attractive costs in India.
- Top-level human or technology resources. For example: Japanese market.
- Markets that provide credibility. For example: Silicon Valley for technology or
France for wines.
123 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
123
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
7.5.2. Market entry models - Go To Market (GTM)
This section makes reference to direct or indirect sales models, usually known as Go
To Market (GTM) and also known as “Routes To Market “ (RTM).
This topic on marketing models is covered in depth in a specific module of this course;
however, given its importance and its significant implications for the internationalisa-
tion model this section has been included, not so much to review all its dimensions,
already expounded in detail in another model, but rather to emphasise that this is one
of the points that require special reflection in the internationalisation model: on many
occasions it is not advisable to apply the source country model by “copying/pasting”
the source market to the international target market.
Figure 39. Market entry models.
Target market
Segmentation of customers by
distribution channel
Market Segment 1Direct Sales
Market Segment 2Telesales
Market Segment 3e-commerce
Market Segment 4Value-Added Partners
ResellersWholesalers
Startup Product Offering
Market Segment 5
• Direct sales with or without an office in the country. It may have various gradual
entry options:
- Remote sellers from our country of origin with knowledge of the culture and
local languages.
- Local freelance sellers on commission.
- Organic growth: opening a sales office or subsidiary.
124 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
124
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
- Acquisition: purchase of a competitor or partner in the destination country that
will allow us to grow in size and gain entry speed.
This option of buying out a local partner makes it possible not only to enter with an
established market share, but also to include technologies that can supplement
our offering. For example, a partner or ISV can provide a solution that supplements
ours or that allows us to consolidate an installed base and market share, often with
a consolidated distribution channel.
Also, in the case of an industrial product, we may have access to production and
distribution capabilities in the new country that will allow us to gain competitive
advantage, either because they are highly cost-efficient facilities or because they
supplement our value-added product offering and differentiation.
This acquisitions alternative is therefore very strategic but also entails greater risk,
not only because of the required volume of capital, but also because of the de-
pendencies in this new country in the event that the business plan goes wrong. In
this case we will have a higher investment level and exit limitations.
• Partners channel for distribution. It is a value-added channel that builds and
adds value through:
- Wholesalers, Resellers,
- Value-added partners (VARs)
- System integrators
The distribution channel with value-added partners and systems integrators is re-
levant, since it is not only a way of reaching the market and the customer, but also
a way of generating additional value by adding layers of value through technology
- additional modules, implementation or support services, training, etc.
These value chains between collaborating companies can, on the one hand, build
loyalty in the distribution channel and, on the other, contribute a large amount of
value for the final customer, making it possible to generate a competitive advantage
based on the total value of the solution of that chain.
This value layer concept is especially interesting in internationalisation models in
which it may be very necessary to add value through support in the local language,
adapting our product to the local commercial regulations and practices, etc.
• Telesales-telemarketing. It may be local or remote, there are multiple telesales
companies that offer coverage in multiple countries with operators who speak
different languages. This could be a good support strategy for the Partners channel,
maintaining our presence as a brand.
125 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
125
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
• Digital Agencies, the opportunity of the shadow IT-bimodal IT and LOBs.
The concept of technology solutions not linked to IT departments is growing increa-
singly in B2B markets. This idea is piloted above all by mobility technologies, the
cloud and big data, which make it possible to develop and implement new business
solutions at lower cost and a faster execution time. These technology projects,
led by the business areas, are implemented as part of a business campaign that
usually includes marketing and communication, in addition to web technologies,
mobility or big data that allows us to know the final customer better. These projects,
initiated and led by the business lines -not by IT- create new market dynamics and
opportunity. For this reason, the sales/implementation channel of these solutions
is usually led by marketing and digital agencies.
• e-commerce online channel. e-commerce linked to a good digital marketing
platform is an excellent way of achieving internationalisation of a product with both
low and variable costs, adapting to the growth of our business. This is probably
the best expansion opportunity with the lowest investment.
• Digital marketing strategy: Both an online channel and a sound digital marketing
strategy may be an expansion success factor and a very good way of achieving
initial entry in the target country. This will enable not only an online strategy, but
also support for the distribution channel, guaranteeing that our product/solution
strategy and message are those that we have defined and not the approach that
can be given by the local partners and distributors.
• In this regard, it is important to remember that indicated by some studies such as
CEB challenger: the consumer purchasing decision process occurs in more than
60% through the assimilation and reflection of online contents. This implies that,
in both a direct sales strategy and with partners or distributors, having a digital
marketing strategy with a well-defined content tree is another key success factor.
Figure 40. The four drivers of digital transformation.
For many technology startups, internationalisation may be a leverage and acceleration
factor using the four digital transformation motors: the cloud, big data, mobility and
social media.
126 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
126
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
These four transformation levers allow us not only to upscale globally at very afforda-
ble costs, but also to understand disruptive business model projects, “uberising” an
existing industry with a disruptive business model.
Guide to defining an effective action plan with a value-added partner
Following is a summary table showing a simple 10-step methodology that I have
developed and used with partners in the last decade in 12 European countries to
develop joint business plans.
This methodology is normally used during a work session in workshop format, in which
the 10 steps are developed jointly and progressively.
Figure 41. 10-step model for developing an action plan with value-added partners. Author: Julio Fernández-Gayoso.
Identify Power- Sponsor to lead
joint plan
1 Define joint solution
2
Agree on focus industries/Geo/Mkt segments
3
Define marketing plan
4
Digital marketing
content tree
5
Agree on target account list
6Define x10
win plans by account
7
Agree on winplan followup
cadence
8
Publish References
9
Agree on Plan Review
Cadence
10
Develop a joint business plan & Agree on Review
Cadence
My model: Guide to developing an action plan with value-added partners
Partner ecosystem matrix. Geography-Industry-Solution
Geo/solution ind1 ind2 inde3
Geo1 Partner 1
Geo2 Partner 2
Geo3 Partner 3
127 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
127
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
7.5.3. Focus marketing efforts on a segment/industry or solution: The “Crossing the Chasm” model
To enter a new market, the FOCUS on an industry-country is key to success.
• The “Crossing the Chasm” model (Geoffrey A. Moore) offers an interesting model
for launching new products, especially for technology companies and startups.
This a reference model aimed at helping to understand the challenges of entering
a new market and the strategies to follow.
• In the “Crossing the Chasm” model, technological or innovative products/services
include a different propensity to purchase and adoption in accordance with the
type of consumer: from early-adopters to the mainstream market. This model lays
down the bases and explains the peculiarities of each consumer segment and
proposes different tactics to follow.
Figure 42. The chasm (I). Source: Crossing the Chasm.
• The definition of the “Chasm” concept, which we could translate as “Abyss”, is
especially relevant. It is this jump that makes a technology company to sell highly
innovative solutions to customer profiles ready to try and experiment new tech-
nologies, products and concepts at a very early market stage: innovators or early
adopters.
128 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
128
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Figure 43. The chasm (II). Source: Crossing the Chasm.
• According to the model, it is in that “Chasm” or abyss where many business pro-
jects die. For this reason, it recommends different techniques that can be sum-
marised in the FOCUS, since it focuses on an industry or sector, and in defining the
geographic area without trying to approach too many countries at the same time
and too industries. This focus in an industry-segment-country makes it possible
to consolidate references and successes in customers to create a “beachhead”
from which to expand.
• I consider this FOCUS advice highly relevant to a startup internationalisation pro-
cess. This is one of the most common mistakes made in expansion processes, in
some internationalisation projects in which we are over-ambitious in the number
of markets to be approached, both from the geographic and industry viewpoint.
• This FOCUS strategy in a geographic region, in a specific industry to achieve
rapid success limits the impact market and also the economic and financial risks.
This FOCUS strategy also makes it possible to customise the value proposition,
references and ROI for a specific industry or segment, ensuring that the quality of
our FOCUSED proposition is more effective and convincing. The model proposes
that, once commercial success and references are consolidated in this segment-in-
dustry-country, said reference be capitalised through a “beachhead” strategy to
expand to other market segments or countries.
• This approach also makes it possible to develop a value-added distribution channel
strategy that allows us to optimise the value creation and capture model.
129 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
129
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
7.5.4. Organisational culture and leadership styles in internationalisation
The concept of business and organisational culture, in addition to leadership styles,
may seem very theoretical and abstract topics and concepts that have little to do with
an internationalisation strategy. However, the organisational culture and management
and leadership styles become one of the keystones in international expansions.
Figure 44. Different management and leadership styles.
Directive
Do this...
Visionary
Inspirational
Affiliative
Relationchips
Participative
Team decision
Pacesetting
Run, Run...
Coaching
Development
Performing a preliminary assessment of the reality of our business culture and defining
the impact of that business culture and leadership styles on the destination country
where we want to expand may be vital. The style -for example, “command and con-
trol” or “power presence”, consisting of being physically in the office for many hours
instead of working by objectives and results- can clash with other cultures. How are
we going to manage and motivate a remote team we cannot see, when our culture
and leadership style are focused on physical presence, on “I know my people because
I see them every day”?
Likewise, the “stick and carrot” management style may be common in our business
culture but may not fit in with others, especially with remote teams in which empower-
ment, autonomy and proactivity must be developed.
Additionally, people’s leadership style has great relevance in multicultural environ-
ments, with multidisciplinary teams and teams from different cultures, races and
religions. Managing all these sensitivities requires more sophisticated leadership styles
than those which may be effective for a startup born in a specific culture and place.
130 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
130
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Goleman’s leadership styles model offers a wide range of styles that should be used
in combination. It is not about choosing one, but rather applying it in accordance
with the moment in time and needs. The fact is that some leadership styles make
it possible to motivate and develop a culture of accountability and transparency in
remote teams better than others.
Tabla 9. Goleman’s six leadership styles.
The Six Leadership Styles (Goleman)
Commanding Visionary Affiliative Democratic Pacesetting Coaching
The leader’s modus operand
Demands immediate compliance
Mobilises people toward a vision
Creates harmony and builds emotional bonds
Forges consensus through participation
Sets high standards for performance
Develops people for the future
The style in the phrase
"Do what I tell you"
"Come with me""People come first"
"What do you think?"
"Do as I do, now"
"Try this"
Underlying emotional intelligence competencies
Drive to achieve, initiative, self-control
Self-confidence, empathy, change catalyst
Empathy, building relationships, communication
Collaboration, team leadership, communication
Conscientious-ness, drive to achieve, initiative
Developing others, empathy, self- awareness
When the style works best
In a crisis, to kick start a turnaround, or with problem employees
When changes require a new vision, or when a clear direction is needed
To heal rifts in a team or to motivate people during stressful circumstances
To build a buy-in or consensus, or to get input from valuable employees
To get quick results from highly motivated and competent team.
To help an employee improve performance or develop long term strengths
Overall impact on workplace climate
NegativeMost strongly positive
Positive Positive Negative Positive
Goleman, Daniel “Leadership That Gets Results” Harward Business Review March-April 2000 p. 82-83.
Also, the different cultures of the countries provide clues as to what management
and leadership styles work best. For example, it is known that in Nordic countries,
particularly Sweden, consensual decision-making -in broad terms, a democratic and
participatory style- could fit in better. The following table shows how different coun-
tries/cultures respond to different leadership and hierarchical adoption styles.
These country/culture based models are evidently a model, a simplification of reality,
because each person and each team may be more or less adapted to an internatio-
nal or local culture. But the truth is that these models help to think about and apply
leadership techniques that can be approximated more to a certain culture.
131 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
131
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Figure 45. Leadership styles in different countries.
Source-Reference: Richard D. Lewis charted 24 different leadership styles in his book “When Cultures Collide” http://www.businessinsider.com/leadership-styles-around-the-world-2013-12
Furthermore, it is important to consider how the time variable is considered differently
in some cultures, for example the concept of quarterly results so in-grained in the
Anglo-Saxon and Western culture, does not have the same general application in
some cultures in which the time factor may have other dimensions in a negotiation.
Also, the cultural factor must take time zones into consideration. This is how I coor-
dinate activities, processes and systems with countries -for example in Latin America
or Asia- which are starting their workday when we are finishing ours; or the weekly
schedule, since there are countries where, for example, the weekend begins on Friday
and Sunday is a business day.
In addition to this factor, there may be significant cultural differences in the work week
concept. For example, in Israel or in many Arab countries the weekend is Friday and
Saturday, and the work begins on Sunday.
132 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
132
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
All these factors, considered individually, may seem minor issues, but if the systems,
management and leadership styles of remote teams are not considered proactively
within our organisation, there may be many disagreements, conflicts and unnecessary
discussions that will negatively impact the work climate and bottom line.
7.5.5. Remote team and project management
An additional factor to be considered is what communication and collaboration tools
we are going to use and how we can use the different team management and lea-
dership styles in these virtual meetings, in those remote projects, ensuring maximum
collaboration and effectiveness while creating a culture of transparency, empowerment
and accountability.
Figure 46. Remote team and project management.
Leadership styles
Virtual management skills, meeting preparation,
execution and monitoring
CultureEmpowermentTransparencyResponsibility
Collaborative tools: Skype, SharePoint, Network speed,
Time zonesTarget-based remuneration
We will expound this point on the modern digital workstation, also called “the modern
workplace”, in further detail in another module.
133 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
133
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
7.6. Possible internationalisation-related scenarios in a startup - reflections for mentoring processes
Summary of considerations and guides
There are different criteria to be considered in an internationalisation plan. We must
always reflect on: our competitive edge in our national market and to what extent it
can be taken to another market and this includes the value and awareness of our
brand. By way of example only, we will enumerate some internationalisation scena-
rios and the factors that can help us to leverage our strategy to gain positioning and
competitive edge.
Figure 47. Summary of case-scenarios and possible reflections for mentors.
Whe
re
• Expansion goals?
• Growth. Image, capital. Customers. Suppliers, technology. Skills, manufacturing
• Levers? International Customers or Partners
• Distances model.
• PEST
• Leadership styles
• Organisational culture
• Diversity
Soft
sys
tem
sSk
ills
How
• Industry-Segment FOCUS
• Product - Solution FOCUS
• Direct Sales Solutions
• Partners Product niche
• Internal systems
• External customer systems
• partners, suppliers
• WEBSITE content tree.
• e-commerce
Glob
alHa
rd S
yste
ms
Selection of country
Culturestyles
leadership
GTM FOCUS
Systemsprocesses
Digital Transformation and Business Model Disruption
134 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
134
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
• Is my startup clear about the reason for international expansion? Let’s see
some scenarios:
- Scenario 1: Internationalisation factor - Existing customers in my coun-
try of origin, with offices or subsidiaries in another country or expansion plans.
In this scenario, I expand with my customer. This not only implies entering the
new country with references, but also reduces economic and financial risk. Also,
this existing customer will be a magnificent source of know-how in the new
local market, of knowledge of the new regulations I must take into account, etc.
- Scenario 2: Internationalisation factor - Partners of our country of origin
with which we have already worked with good results and which already operate
in another country satisfactorily. This partner with which we normally work well
in our country of origin will be very receptive to collaborate in this new country,
exporting the good practices we have already developed jointly. This is especially
true when the partner has developed a solution that provides added value to our
solution. It may be, for example, software to which the partner adds a supple-
mentary module that enhances the solution as a whole or an implementation
and training solution for our software that provides added value to the customer
with a high degree of complementarity.
- Scenario 3: Internationalisation factor - Growth of billings and profit. The
goal of growing in terms of billing, sales volume and profit is an important factor
in many cases but, as we will see, not the only one. In this case, it is critical not
only to make the right decision about the country wisely but also about how I
am going to sell and implement the solution using a powerful e-commerce and
digital marketing solution or distribution ecosystems and partners of the target
country for leverage.
- Scenario 4: Internationalisation factor - Search for natural resources,
cheap manufacturing or technology/components in a specific country
as a basis for growth. This approach is very normal in industrial companies
that use components at a good price and with a production base. China could
be a good example. In this point, the preliminary country study and regulations
and commercial practices are critical, since once inside we will have exit barriers
to cancel the investment.
- Scenario 5: Internationalisation factor - Due to the country’s image of
credibility, access to market trends. A good example of this is Silicon Valley
in technology. Having a R&D office in Silicon Valley gives credibility for accessing
VC funds, etc. Likewise, it enables access to the latest technology trends and
to US VC that will perceive the company as a potential local investment upon
residing in the USA.
135 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
135
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
- Scenario 6: Internationalisation factor - Value chain of an important ma-
nufacturer. This may be very common in the components industry, for example
automobiles, airplanes or mobile phones, which value and even require proximity
to their R&D points or factories.
- Scenario 7: Country selection guidelines. In addition to the economic
potential, minimise “distances”. Start off with a nearby country, in terms of
geographic, cultural and idiomatic proximity.
- Scenario 8: “Don›t try to eat the whole elephant in one bite” J: Regard-
less of your product and VC funds, do not attempt to eat the whole elephant in
one bite or target too many markets at the same time. International expansion
is complex, takes time and a great deal of effort. Measure your strengths and
appeal, start small and go step by step.
- Scenario 9: Focus on an industry-sector - solution. Launching a new pro-
duct in another country requires starting from zero both in the launch of the
product and the trademark. The recommendation here is to focus on a sector
or industry to achieve a beachhead from which we can expand with references
and growth. In this regard, the “crossing the chasm” model serves to illustrate
the challenge and options to follow.
- Scenario 10: Commercial strategy and product packaging - value. Is my
strategy to sell directly? Am I going to sell from my country with local teams,
with agents or with freelance commission sales representatives? Do I need a
value-added channel that will help me to implement or localise my solution? Am
I going to build a customer care and support structure in the country or am I
going to use partners? How do I foster loyalty in my distribution channel? What
is the margin, leaving a margin to create other associated products? Adding
services - support - training? This dimension has many implications depending
on the product we sell.
- Scenario 11: Digital transformation creates new opportunities and sca-
ling and growth methods. Digital transformation and the four big “IT mega
trends” of the industry (mobility, cloud, big data, social media and collaborative
platforms) create exceptional leverage for startups in their internationalisation
plans and disintermediation and disruption opportunities in more traditional bu-
siness models. And depending on the product -especially software or games-
make it possible to sell online with a significantly global approach. For companies
born with a very online approach and global strategy such as online apps -for
example, SaaS, games, etc.-, cloud technologies, big data and mobility make
it possible to undertake global operations at a very low cost, but it is also true
that rapid expansion requires a substantial effort in the international support
structure - languages, support call centers, product location, etc. Therefore,
measuring the movements of this expansion continues to apply.
136 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
136
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
- Scenario 12: Management and leadership styles: Management and leader-
ship style (for example, “command and control”, evaluating people “based on
the number of hours of physical presence in the office”), taking into account the
six styles of the Goleman model, have their strengths and moments of use, but
it is critical to adjust them in accordance with the culture of the country and the
styles that best fit in with this culture. Likewise, it will also be important to take
into account our company’s corporate culture to choose the style we will use.
For example, if the corporate culture we want to develop pursues empowerment
of the teams, transparency and accountability, the leadership style will be very
different if the “command and control” style is imposed in our company.
- Scenario 12+1: Remote team management tools and techniques: If we
work as part of a team based on physical presence and personal meetings,
how do I integrate all this with the reality of working with remote teams? There
are a multitude of technology tools for remote team collaboration in the area of
communication (such as Skype), collaboration and project sharing. In addition
to selecting the appropriate tool, it is important to create the soft skills that make
it possible to manage, lead and motivate teams remotely. This point is closely
related to point 12, but also adds the layer of tools and good practices in the
management of remote teams. There are also bad practices to be avoided that,
without the appropriate knowledge and training, can be critical to the success
or failure of a project.
7.7. Key questions for the mentor
The goal of this section is to endow the mentor with some key questions that induce
reflection, with which to structure their thoughts in order to understand and analyse
the business proposed by the entrepreneur.
We must firstly consider WHY and FOR WHAT REASONS
we want to internationalise the startup:
What are the advantages and opportunities (access to new markets,
reduction of risks, credibility, knowledge, access to new resources,...)?
What are the disadvantages and risks (local competitors, ignorance of the
market and of commercial practices, country risks, regulations,...)?
Next, we will analyse WHERE we want to internationalise the startup:
What are the distances from the countries where I could internationalise
the startup?
What selection criteria should I consider? What countries should I choose?
With regard to the chosen countries, can I perform a
PEST analysis to refine the selection?
137 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
137
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
Should I attack all the countries and all the sectors/industries
at the same time?
To do it at the right time, the WHEN of internationalisation:
Have we taken into account factors such as consolidation
in the market of origin, financial situation,...?
Do we have a sufficiently mature product?
Can we develop a modular product architecture to foster loyalty to our
channel?
Lastly, we will address the model, the HOW of internationalisation.
What does the review of the five sales models of the Go To Market model
provide?
It is necessary to focus marketing efforts on a segment/industry or solution?
What does the review of the 12+1 possible internationalisation-related scena-
rios provide?
7.8. Resources for deepening knowledge
Recommended readings and cited sources
• Robert Grant, Contemporary strategy analysis, Blackwell.
• Geoffrey A. Moore, Crossing the Chasm: Marketing and Selling Disruptive Products
to Mainstream Customer.
• Geoffrey More, Inside the Tornado, Marketing strategies from Silicon Valleys Cutting
edge.
• Michael E. Porter, The Competitive Advantage: Creating and Sustaining Superior
Performance.
• Richard D. Lewis charted 24 different leadership styles in his book “When Cultures
Collide”.
• Eric Ries, The Lean Startup.
• Alexander Osterwalder, Business Model Generation.
• Business Evolves, Leadership endures (Russell Reynolds leadership series).
• Matthew Dixon, The challenger sale.
• Keith Rosen, Coaching Salespeople into sales champions.
• Anthony Gioeli, International Business Expansion.
138 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
138
certification guidebusiness mentor madri+d
module 7Mentoring for internationalising a startup
• The management consultant›s manual, Andrés Fernández Romero.
• Covey, Stephen R. The seven habits of highly effective people.
Websites and references
• Madrid mentoring network www.redmentoresmadrid.es
• madri+d mentoring articles blog
• h t t p : / / w w w. m a d r i m a s d . o r g / b l o g s / e m p r e n d e d o r e s / c a t e g o r y /
mentoring-para-emprendedores
• Spanish mentoring network. Mentoring Spain. Mentoring articles blog. www.men-
toringspain.com
• https://www.cebglobal.com
• http://www.theinnovativemanager.com/crossing-the-chasm-theory-how-to-mar-
ket-sell-and-improve-your-new-invention/
• https://www.fastcompany.com/1810674/culture-eats-strategy-lunch
• http://labs.openviewpartners.com/the-best-routes-to-market-for-international-ex-
pansion/#.V_-cIWya1O9
• https://hbr.org/2013/06/dont-just-create-value-capture-it
• http://www.gartner.com/webinar/3176522/player?commId=184883&channelId=
5500&srcId=1-6595640793
• https://hbr.org/2016/06/the-go-to-market-approach-startups-need-to-adopt
• http://www.businessinsider.com/leadership-styles-around-the-world-2013-12
Cited sources and images
• http://www.businessinsider.com/leadership-styles-around-the-world-2013-12
module 8Investment in the startup development stages
Hermógenes del Real Álvarez
140 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
140
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.1. Teaching goals
The main goals of this module are:
1. Awareness of the main contributions that a mentor may make to a startup in the
process of searching for the investment.
2. Awareness of the types of investors in the different startup development stages.
3. Awareness of the key aspects of the investment process that must be taken into
account by entrepreneurs and those who influence the decision-making process
by investors, at different development stages of the company.
8.2. Introduction to the module
We find ourselves in a situation in which mentoring requires having a clear empathy
with the universe of the investment and its expectations. The percentage of failure in
startups is very high, even for more experienced investors.
Underlying this fact is that recovery risk levels and non-return probability are very
high. For this reason, in the case of decisions made by investors which once taken
are irreversible, we must give them expert advice in a balanced manner. This is the
essential reason for which the decision to invest is considered to have the greatest
importance in the company’s beginnings.
The strategic nature of the investment decision arises from the need and interest in
analysing it in detail before undertaking it, since its premature liquidation, once per-
formed, may give rise to substantial losses.
In view of this decision, we must consider those aspects that make it possible to
increase the probabilities of success as a business, advance smartly, validate hypo-
theses to reduce risks and enhance the value proposition for investors, whether family
members or friends, business angels, companies or investment funds, banks or even
government agencies.
Putting ourselves in the investor’s shoes is especially relevant for entrepreneurs in
search of funding. As will be understood, this type of decisions cannot be taken ins-
tinctively, due to which it is essential to have a rigorous analysis methodology that will
make it possible to properly perform a full assessment of its viability.
We must put ourselves in the investor’s shoes.
141 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
141
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.3. Investor suitability and mentoring
When a mentor advises an entrepreneur or group of entrepreneurs on investors,
they must take into account the goals of both parties and ensure that there is mutual
interest.
The entrepreneur asks: what investor could be interested in my startup? what interests
the investor about my project? At this starting point, a good investor must have the
following characteristics:
• The investor must help in the decision-making process. The investor must tolerate
ambiguity, i.e. support the entrepreneur even if they are in disagreement at times.
A good investor has invested in the team and in the company, due to which their
intention is always to help.
• Networking. It may be the most important aspect of an investor. Their contact
network can facilitate access to people and companies that help to develop
startups.
• Another vital facet of the investor is that of helping to attract talent.
• The investor helps to support the pressure. They understand it. The workdays are
endless for the entrepreneur. They do not talk about anything else, but it is a relief
to have a shoulder on which to lean on once started up.
• The investor’s commitment is exactly the same as that of the entrepreneur, because
the investor contributes all its resources to ensure their mutual success.
• The investor must have enough funds to accompany the startup on its journey with
more than one round of investment. If the investor does not have enough funds,
they can help by facilitating access to the necessary investors in other rounds for
different reasons. For example, there are companies that require an unattainable
dimension in terms of amount but not in terms of contacts that would help to raise
and obtain the necessary funds.
• An investor who has the company’s interests in mind helps to understand that
reasonable debt is not necessarily bad. And they help to achieve different loans,
from both public and private entities, to achieve the most adequate capitalisation
and indebtedness structure.
The ideal investor has and does all of the above for the sake of the company.
Attitude is also a key aspect and, therefore, the mentor must know and help to
“choose” the ideal investor.
The mentor has holistic vision to see the soul of the investor and the entre-
preneur because they must be linked to the rational and emotional aspect
and startup of the business.
142 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
142
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.4. Development stages of the company and its investment
The truth is that the importance of finding an investor adequate to the stage of the
startup life cycle is usually underestimated.
Being successful in a business entails the difficulty for entrepreneurs of having to
grow in a balanced manner and with the appropriate resources to progress optimally.
We can ask ourselves what type of investor we need and at what point they will invest.
However, the most relevant aspect, in addition to the two previous aspects, is the
amount of money required for the development of the startup.
The development stages, types of investors and amount are:
• Idea or PRE-SEED stage (Investment <€0.1K)
Does not require a large amount of money. Promoters are usually the main in-
vestors. The pre-seed stage refers to the moment in which an idea arises, during
which it is necessary to put it into practice and in which the product is often not
protected. There are still no billings.
At this stage, the founders themselves perform the first injection of capital using
their own funds and also resort to the known 3F: “Family, Friends and Fools.”
• PRE-SEED - SEED stage (Investment between €0.5K and €100K)
In addition to the promoters and 3Fs, there are accelerators and other investors
(business angels) which, aside from the local investment culture, invest because,
regardless of the risk, the possibilities of success substantially lower the cost of
investment at this stage. It is a matter of instinct for businesses.
• SEED stage (Seed Investment <€0.3M)
When a startup enters the seed stage, it already has the finished product, with a
profiled and implemented business model. At this point we already have a team
working full-time and we go to market, billings become more stable and recurrent
and we can determine the break-even point of the project. At this stage the bulk
of the investment made by the business angels which have become involved in
the project and also participatory loans and public financing instruments come
into play. In Spain, for example, they are granted by ENISA, CDTI (Centre for the
Development of Industrial Technology) and other agencies.
• EARLY STAGE (Investment €0.5M-€1M)
Once we have placed our product or service on the market, sales are the crucial
element that will influence the investor’s decision. Customer metrics and indicators
(business KPIs) take the startup to its turning point. At this point the business plan
is mature and complete, in addition to the strategy, the product, the legal form, etc.
143 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
143
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
• The growth or MID STAGE (>€1.5M)
It focuses on streamlining operations and upscaling sales and, to this end, an in-
jection of capital and new investments are required. From this moment onwards,
venture capital funds come into play.
8.5. Mentoring and support for obtaining investment
Helping a company by maintaining a global vision is essential because the mentor
has a strong influence and this entails a significant responsibility in terms of what we
can contribute to obtain the investment in each of the stages of development of the
startup.
Next, the investor and entrepreneur embark on a journey together
accompanied by the mentor until defining the final business plan.
This journey takes place through the Cash Curve until defining the business plan, the
three stages of which are shown in the following figure: Generation of the idea, Mar-
keting and Implementation. The curve shows the cumulative cash, taking into account
all the resources related to the project and estimating income and expenses over time.
Figure 48. Cash curve.
SOURCE: Boston Consulting Group. (2006). Andrew, JP, Sirkin, H with Butman, J. Payback Rea-ping the Rewards of Innovation. Harvard Business School Press, January 2007.
144 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
144
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.6. Generation of the idea
At the early stages, investment plays a crucial role in companies’ future evolution,
without which we can hardly overcome the “death valley” and grow rapidly.
8.6.1. The idea
At this first stage, having a sufficiently clear idea of the “business” we want to start up
is essential to creating a company with high chances of market success. However,
this idea is not only valid at this early stage. The evolution of the business idea will
be constantly iterating and innovating, and this can only be achieved by reflecting on
the organisation itself and on its possibilities of increasing profitability and persisting
over time.
The concept of “business idea” will therefore be completed
by the “company project or business plan” but not immediately.
The basic issue at the start is knowing whether there is market value, i.e. if the product
or service meets a need of the real world better through an advantage in terms of cost
(cheaper), generating more income or delivering faster or to a different place than the
current solutions. Notwithstanding the fact that the attributes of the new product or
service provision must be clearly better than existing ones.
It is important to bear in mind that the forces installed in the market will not easily
cede market share, even if their solution is worse or non-existent. However, customers
seek to cover this need and are not worried about other competitors, but will have
to reach that market.
At this initial stage the mentor’s criterion, in addition to detecting uniqueness, must
convince the entrepreneur of the importance of evaluating the protection of the pro-
duct or of the service provision process through patents, utility models, intellectual
property, etc.
The keyword for an investor in relation to a product or service is feasibility: There are
products that cannot be made and services that cannot be provided. It is important
to know the implications for safety, environment and product design.
Questions for the mentor to contrast the idea
• Is it contextual or structural growth? That is, are the reasons that create an interest
in this product/service merely specific or are there reasonable expectations that
they will remain over time?
• Does it exist, has it been successfully tested or is it disruptive?
145 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
145
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
• Can it be patented or protected?
• Is there much competition in the geographic area where they want to start? How
does it evolve? Which are the difficulties most commonly encountered? Which are
the most significant competitive differences?
• What is the value proposition?
8.6.2. Market research
The importance of the idea is compared to how customers evaluate the product or
service and whether or not they perceive that their needs are met. The market analysis
is based on secondary databases until we start selling. If an investor wants to invest,
we must show them the recipient of the use of the product/service, who buys it, who
will pay for it and at what price.
The investor knows that, at this initial stage, the reliability of the data is low and the
evolution of the idea, compared to the final result that can be obtained, is highly voluble
due to being incipient. The mentor will help to build the trust of the marketing power.
Information that the mentor can compare:
• The potential market, its size and contribution of the product/service to this market.
• Expound the reasons and advantages offered to future customers to purchase the
product/service though the value proposition.
• Study the omnichannel retailing proposal.
• Detect the fixation criteria and pricing strategy with comparisons and algorithms.
• Detection of market segments to establish differentiated or undifferentiated sales
strategies.
8.6.3. Analysis of the environment
The returns affect the maturity sought by the investor. Knowing the value it provides
to customers, the uniqueness of the products and services and the chances that the
environment will react to the innovation and the way of managing and organising the
company are characteristics of efficiency and effectiveness that the investor seeks.
The mentor’s role is highlighted when the entrepreneur is aware of the strategic dyna-
mics of its situation, i.e. they know how to determine the following sequence:
146 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
146
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
Vision - Mission - Goal - Action
Within the scope of the business strategy, this sequence reveals the business mindset.
It is the characteristic sequence that must occur either when a business project is
created and implemented or when the strategy is established in an emerging “blue
ocean” or highly competitive industry. The mentor must not forget that the analysis
of the business environment is currently subjected to the fact that the digital trans-
formation processes that cause any sector be in a constant state of disruption can
dynamite the sequence and its normal development, with the ensuing increase in
uncertainty and risk.
Comparison questions for the mentor
• What is the market outlook three years from now? What social trend does the
project follow?
• Will we be well supplied and with the highest quality technology and products/
services, brand or will they be “free”?
• Can we maintain our positioning with respect to the competition in the future?
• Does the company have the possibility of establishing alliances, contracts and
special agreements with other companies?
• How does industry lobbying work?
• How much can I grow and what development can I expect?
• Am I sufficiently informed about seasonality, industry regulations or the existence
of stagnated sales?
• Are the contracts adapted to the legislation in force or is legislation non-existent?
• Could there be important changes in legislation in the short or medium term?
8.6.4. The entrepreneur
The entrepreneur or development team, together with commercial feasibility, are usua-
lly the most highly valued aspects of investor entry.
The most relevant aspects are those relating to the experience, capacity, nature,
commitment and context in which the team is developed.
It is important to know if any close family members are related to the business world,
if they know the business to be undertaken, if they have a related contact network
and appropriate and accredited training.
147 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
147
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
The mentor’s role often consists of curbing the team’s unbounded enthusiasm, becau-
se they will usually confirm the viability of the idea instinctively before even starting.
Investors are aware of the excessive risk of some entrepreneurs. Unfortunately, there
are “charismatic” people capable of deceiving the people around them for a certain
period of time. It is essential to know the personal and professional background of
any person with whom we want to undertake a business project. This will avoid many
subsequent disappointments.
The capability sought is not only technical and sales-oriented, but also managerial
skills and ability to comply with standards and legislation.
They must have sufficient character to overcome adversity (resilience) and physical
and mental resistance are crucial to creating a business. Details such as knowing how
to fire employees, request a loan, sell, resolve conflicts, build trust, etc.
The investor also expects the entrepreneur to undertake to wait to obtain better results
without rushing in headlong and with the support of its allies.
Another highly valued aspect is whether the entrepreneur is fully dedicated to the
business and if they have other obligations that can undermine their performance.
The investor expects the entrepreneur to be capable of assuming rationally detected
risks and avoid taking excessive risk. The money is presumably loaned by the investor
with a single objective in mind: that it is returned with the highest possible profitability
and, even better, within the established time frame.
Possible questions made by investors to the entrepreneurial team:
• Do you have self-confidence, perseverance and dedication to achieve the project
goals?
• Do you feel comfortable assuming risks?
• How much adaptation capacity do you have?
• Are you very organised?
• What do you think about optimism?
• Do you have management capacity?
• Why must we have innovative spirit?
• Are you market focused?
• Are you capable of detecting opportunities?
• What do you think of intuition?
148 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
148
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.6.5. Assessment of the Business Model
In order to assess the business model we will have to design it first. There will be too
many hypotheses to validate. Agile development helps, as a methodology, to put in
place a completely different vision:
We must not create the conceived product, but rather conceptualise the business
model, detect hypotheses on which it is based and test said ideas on the market as
soon as possible, with the objective of discovering a minimum product that will help
us validate our value proposition and make decisions.
A tool normally of great use to the mentor, the entrepreneur and the investor at this
first stage is the Business Model Canvas, seen in module 6 of this guide, since it is
based holistically on the value proposition as a strategic aspect and allows us not
only to analyse innovative products or services, but rather is key to making decisions
related to alliances, segments and analysis of income and expenses.
Some questions related to the business model include:
• Does it make sense to consider a licensing model?
• Is the entrepreneur aware that if it grows in size he or she will not be the appropriate
person to undertake the project?
• Does the entrepreneur have a vocation for sales and selling skills?
• What is the company’s risk level?
• What is the return on investment and within what time frame?
8.7. Marketing stage: investment prior to launch
Role of Business Angels as accelerators of the process and development of entrepre-
neurial projects has its maximum expression during the launch stage. Their mission,
as shown in figure 48, is to accelerate improved cash flow in order for the company
to advance if accepted by the market.
Agile methodologies are used to validate the idea without need for a formal
business plan.
149 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
149
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.7.1. Validation of the customer/problem hypothesis
The business model is full of unconfirmed hypotheses or ideas about what we expect
will happen, and the most important hypotheses are related to who the customer is
and their problems. If we make a mistake in this regard, the rest of the model will
collapse like a castle without foundations.
The company concept is tangible when it is applied to a product/service and its
feasibility can be proven and analysed. It is not necessary to develop a product with
all high-range features: what’s important is to prove that the expected functionalities
have been developed and can be manufactured.
During this stage, a first version of the product is developed that will help to validate
whether we are meeting the customer’s need in relation to our value proposition, i.e.
if our solution is adequate for them.
The Minimum Viable Product (MVP) is a initial version of the product that will help to
validate the hypothesis of whether the customer appreciates our value proposition.
This implies creating the basic model with the minimum elements that will allow us
to receive the greatest amount of information on the customer’s perception with the
least effort.
The investor’s money will be used to prove in the real world whether the MVP works
and to find customers who will validate all the hypothesis on our idea as often as
necessary: if it meets a need, if customers are willing to pay for it, if they like it or if it is
easy to use. That is, it is used to measure the results of the experiments and, above
all, to learn and change the course in accordance with said information. It is about
evolving if we are sure that we have identified the group of customers who have a
problem that we can/want to solve.
During this stage, the investor wants to make sure that the entrepreneur knows that
the money will not be assigned to paying salaries, but rather to developing the MVP.
8.7.2. Market validation
If we have defined the concept and the minimum viable product, the investor’s money
will be used to determine scalability through omnichannel retailing which, at this sta-
ge, is the main factor on which the investor focuses. The main reason is to attract
customers and, to this end, it is important to have reliable comparative information
on market behaviour.
For the convergence of interests between the entrepreneur and the investor, the initial
concept developed in the Minimum Viable Product must be proven with customers
-following Steve Blank’s contributions- to see if it works in order to validate all the
150 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
150
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
hypotheses on our idea. If it meets a need, if they are willing to pay for it, if the distri-
bution channels are adequate, if they like it, if it easy to use, etc.
This customer adoption process usually begins with a very small number of custo-
mers, but it must be supervised in technology-based companies, which are often
guided by mere technical interest, aside from commercial development and real bene-
fits. In these cases, the mentor and investor must detect whether the company is
being distorted by overdeveloping the MVP at the expense of developing its customer
portfolio and business model.
The results of this process serve to verify and modify our MVP in accordance with
said information, modify and iterate until its scalability is validated.
• The following questions summarise the information required to verify the following
hypotheses:
• Have you performed a market study such as a focus group or survey?
• Have you validated the empathy map?
• Have you studied the Customer Journey and Emotional Customer Journey?
• Have you validated the Service Blue Print in accordance with the interactions with
the customer and back office?
• Have you identified critical factors for the market environment?
• Have you identified the economic and market trends?
• Have you quantified the size of the market?
• Have you quantified the market segments?
• Have you identified the size, growth rate and competition of the market segment?
• Have you analysed the reaction of the competition to sharing the market, the
competitive position, product capabilities and resources?
8.7.3. Viability of the business: Validation of the Business Model
As observed in figure 48, the acceleration of income and proper identification of
costs and investment indicate that we have arrived at the first major crossroads in
the decision-making process. Business angels help us and prepare the moment of
entry of large investors and investment funds. These decisions may be irreversible
and significant, and the mentor must have sufficient expertise so that the more adjus-
ted the investment in terms of money and opportunity cost, the lower the investor’s
aversion to risk.
151 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
151
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
At this point we can analyse the scalability of the business. We will need the following
information:
• Time horizon. There is no golden rule, but we must establish a time period.
• Infrastructure, administration and technology support costs.
• Production and marketing effort costs.
• Expected income at the prices detected and validated by the customer.
The break-even point allows us to decide. Should we continue or not? There are times
when the idea should be given up from the start. The learning source may have been
substantial, but the analysis is even moreso. Although it may seem surprising for an
entrepreneur, there are businesses that do not work.
How do we know? Because the size of the market is not sufficiently large to cover
the costs or because the price that would have to be applied is so high that custo-
mers would not pay it. In this regard, there is a halo of hope when a business model
(B2B, B2C, B2B2C, etc.) that does not get off the ground can resort to not expecting
gains from financial transactions but rather from the information and volume of data
obtained.
We risk living under the illusion that we are emulating Google or Amazon with
a business model based on data we will not have and in which investors will
not readily invest.
The second decision would enlarge upon the first, i.e. if we do not give up, should we
pivot or persevere? We have reached the stage where the analysis of the break-even
point tells us whether we have chosen the wrong model, due to which we may have
to pivot the business model. This implies either changing and redesigning said model
on the basis of the lessons learned to date or persevering further.
The third and last decision would be: whether to be an influencer or be influenced.
The answer lies in creating partnerships with companies that will determine whether
we develop our own trademark or leverage the traction of other(s) to develop the idea.
Well-grounded decisions attract the money of investors who know they are assessing
the level of risk at the right time.
Investors can be crucial to creating partnerships to obtain sufficient support for dis-
ruptive ideas that transgress traditional models, because the goal is to determine the
level of income is required to achieve the return on investment requested by founders
and investors.
152 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
152
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
8.8. Execution stage. Launch
At this last stage we must establish a sound basis. All actions leading up to this point
have laid the foundations of the business plan, but before drafting and presenting the
final version at this stage we need to request substantial amounts of investment that
for an entrepreneur are usually unattainable and that will help the investor to decide
whether to invest or not.
8.8.1. Functional areas
The information obtained to date is valid. There are many things that are already done
and will be included in the business plan, such as the strategic analysis, environmental
analysis, definition of the product/service, business model, market validation, break-
even point, etc. However, the functional areas still have to be delimited.
The business plan must simultaneously address the production area, the marketing
strategy and the organisational structure in order to determine where to invest the
money and to develop a balanced financial model of the company.
Production plan
Once technical viability has been achieved with the MVP and the market aspect, the
goal now focuses on creating prototype with the information obtained. This prototype
seeks to obtain the product specifications, the manufacturing process required and
cost estimate.
It is essential to study the supply chain and flexibility of the installed capacity in order
to determine scalability and company value.
Marketing plan
The goal is to validate the market opportunity that the customer expects to obtain both
in attributes, service station, logistics, supplies, price, market capture and sales plan.
The analysis of the evolution of indicators and customer tracking will allow us to know
whether we should invest an advertising to promote our business or not. This is the
variable that requires the largest expenditure to test our product on the market and its
ROI is more than uncertain. The marketing plan, in written format, becomes a critical
component of the final business plan.
153 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
153
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
Structure and teams
The analysis of the investment project will consist of simulating, as realistically as
possible, what could occur if the decision was made to undertake it.
Normally, the development of the prototype and marketing plan will offer alternatives in
terms of, for example: people required, size, location, technology and launch calendar.
Without forgetting possible subcontracting and the intensive use of teams.
Consequently, a single investment project may be divided into various “projects” for
analysis purposes, with more or less marked differences depending on the required
casuistry and structure.
Financial plan
The financial plan groups together information from the other areas of the company.
If we are looking for an investor, the business plan will need to have a section that
includes information on the current value of the investment opportunity, the rate of
return, the anticipated funding requirements and return on the investment.
The reason for excluding finance until now is that a wrong decision could be made
upon mistakenly rejecting a project that does not easily guarantee future projections
due to their uncertainty. In these cases the measurement methods used are based
on comparison with other companies.
The necessary investment volume will be determined by the valuation of the company
and by its performance once started up.
8.8.2. Final considerations
The first stages of development of the company and its approximation to the mindset
of investors until performing the business plan. It is true that the business plan can
be defined as the set of priorities (mainly financial) established by the developer of
the system called company. In fact, it is usually materialised in a reference document,
which requires the approval of all the promoters in one way or another for the inves-
tors. This effectively constitutes a policy statement or development plan with the
guidelines that must be followed.
Many entrepreneurs rush headlong and are already at the early stage before even
protectng the product, i.e. they define a company plan when unnecessary. It does
not begin with a company plan but rather with the idea, which is the first step, and by
validating market needs, which is the second step.
154 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
154
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
The market will not do what entrepreneurs want
There are aspects such as those related to the legal structure with regard to share-
holder agreements and establishing rights in the rounds of investment that must be
prepared and planned. For example, transferring a high percentage to an investor
may strangle the company if it needs additional rounds of investment or financing
due to the concessions made prematurely and with clauses that may limit their future
development.
The most important part of the mentor’s role is to know how to distinguish between
a “business idea” and a “business mirage”. Not doing so could lead to mistakes in
the form of companies that excite but do not work. These situations, while shaping
the mentor’s assessment capacity and experience, it can also undermine his or her
self-esteem and that of the entrepreneur.
Key questions for the mentor
An approximation to the financial questions that will be asked by an investor upon
analysing the business will be as follows:
• Has the company overcome the deadlock?
• Is the company generating positive cash flows?
• How many rounds of investment does the company need?
• What sales and benefits are expected in the next 3-5 years?
• How long will the company’s money last?
• Is it a company designed to be sold?
8.9. Resources for deepening knowledge
Recommended readings
• The Boston Consulting Group Inc, USA 2006.
• Andrew, JP, Sirkin, H with Butman, J. Payback Reaping the Rewards of Innovation.
Harvard Business School Press, January 2007.
• Blank, S The Four Steps to the Epiphany. 3rd Ed. Lulu 2006.
Additional readings
• Lasa, Carmen et al., Agile Methods. Scrum, Kanban, Lean. ANAYA (2017).
155 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
155
certification guidebusiness mentor madri+d
module 8Investment in the startup development stages
Useful Websites About methodology
• http://www.venturecapitaltools.com/
• https://www.adventureros.es/
About Business Planning Agile methodologies
• https://javiermegias.com/blog/2013/07/por-que-emprender-ligero-problemas-bu-
siness-plan/
• https://innokabi.com/
About types of business models
• http://www.empirialab.com/que-rayos-es-b2b-b2c-b2a-b2e-c2c-c2b-g2c-b2g-p2p/
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Rafael García del Poyo
157 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
157
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
9.1. Teaching goals
The goal of this module is to provide an overview of the legal and/or business concepts
that may arise during the entrepreneurial process. Although it consists of offering an
overview of certain points, the main legal problems that may arise in entrepreneurial
initiatives that focus on the use of new information technologies will be developed
in greater depth, both due to their rise and to the widespread ‘ignorance’ of their
potential relevance in certain business models.
This brief section is also aimed at helping to understand the reality of the business
from a multidisciplinary and integrating perspective to help entrepreneurs to undertake
this adventure/process with a certain level of technical knowledge and solvency with
respect to the different real situations in their environment.
However, the purpose of these lines is not to offer guidelines for solving the problems
that may arise in this process, but rather endow entrepreneurs with practical and sim-
ple tools that will enhance their professional training with effectiveness and usefulness
to identify any possible contingencies that may arise as accurately as possible and
in the shortest possible time, or have the resources to identify those situations that
may give rise to controversies.
Lastly, this text is undoubtedly focused on obtaining general knowledge, albeit not less
rigorous, about the problems raised and their possible solutions, which will always
remain open and flexible to other reasonable arguments.
9.2. Basic legal concepts for mentors of technology-based entrepreneurs
9.2.1. General considerations
As a starting point, any business decision must include or be preceded by a series of
analysis that can be limited to the following:
Business project: The business project must contain at least one analysis:
• Market. Prior to embarking on a project a market analysis must be performed
objectively and realistically with the aim of answering the following questions,
among others:
- The project: Falls within a growing market?
- Belongs to an innovative sector?
- Are you aware of the degree of competition you will face in the market?
158 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
158
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• Administrative problems. Another element to be taken into account consists of
identifying administrative aspects such as:
- Work contracts, agreements, social security,..
- Permits, taxes, municipal licences,..
- Insurance.
• Financing. In general, it is the first obstacle to commencing a business project and
therefore constitutes a vital point:
- Do we have enough own resources?
- Must we seek other sources of financing such as credit facilities or loans?
- Are there public support measures for which the project is elegible?
Business plan: The business plan is a document which, as a general rule, will include
the following points:
• Description of the business or entrepreneurial initiative and its goal.
- Technical description.
- Geographical location.
- Economic and financial structure.
- Legal structure.
• Definition of the product/service.
- Needs to be met.
- Differences with products of the competition.
- Existence of any rights over the product or service to be marketed.
• Planning and market study.
- Marketing plan.
- Establishment of the distribution networks.
9.2.2. The business decision
No matter how difficult it may seem, meticulous planning of the entrepreneurial deci-
sion may avoid many headaches in the future. The first step is to decide whether
we want to carry out the entrepreneurial process autonomously or jointly with other
partners, known as FFF (Family, Fools and Friends).
159 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
159
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Once the decision to undertake a business project has been made we must assess,
among other aspects, the novelty of the business, the involvement where applicable
of the other partners, the trade name with which it will enter the market, etc. For this
reason, it may be advisable to sign a document -known in the market as Letter of
Intent (LOI) or Memorandum of Understanding (MOU)- in the case of not undertaking
the business project alone, among other people who want to become involved in
this process.
However, it should be noted that, in any case, the best option would be to request pro-
fessional advice on the legal form that would best adapt to each type of entrepreneur
in accordance with their capabilities, knowledge, circumstances and expectations,
since the business project may range from a self-employed professional to a public
limited liability company or other civil or special structures.
9.2.3. The letter of intent
The Letter of Intent can be defined as a preliminary contract in which the main clauses
that may guide the entrepreneurial process may be regulated. The main goal of these
agreements is to establish the parties’ intentions, in addition to the commitments they
intend to assume in the entrepreneurial process. However, it must be borne in mind
that this type of agreements are usually drafted in two differentiated ways.
On the one hand, there are those that only seek to translate a series of intentions of
the parties to develop this process in which certain obligations are assumed but which
are not binding, i.e. should any of the parties finally not ‘act’ as agreed, they cannot
be legally obliged to carry out the described actions. There are also obligations that
are drafted with a binding nature, whereby the other signatories of the agreement may
request compensation from the party which does not fulfil the acquired commitments
for the damages arising from the breach of their obligations.
As a general rule, this document is not used only by people who want to undertake
a business project, but is also widely used by companies as a preliminary document
prior to the negotiation of contracts or joint development of projects.
The two clauses par excellence of this type of agreements are the confidentiality and
exclusivity clauses. It should be noted that, regardless of the binding or non-binding
nature of the document, as a general rule the two previously identified clauses will be
binding in nature, i.e. the legally oblige the signatories thereof.
• Confidentiality clause: The confidentiality clause is a clause whereby the parties
undertake to maintain secrecy and not to disclose all this information, data, pro-
cesses, status of the negotiations, etc., that the parties define as confidential
information.
160 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
160
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• Exclusivity clause: The exclusivity clause is that whereby the parties undertake not
to carry out the actions determined therein with third parties (people/companies)
for a certain period of time.
It would be advisable for the Letter of Intent to regulate the actions that each partner
will carry out to undertake the business project in accordance with the structure
decided upon.
9.2.4. Structure
As a general rule, entrepreneurs can choose between the following structures to
develop your business:
• Natural persons:
- Individual Entrepreneur.
- Joint Property Entity.
- Civil Society Organisation.
• Legal persons:
- Business entities:
� Business Partnership.
� Private Limited Liability Company.
� Private Limited Liability Company New Company (between 1 and 5 natural
persons).
� Public Limited Liability Company.
� Partnership Limited by Shares.
- Special Trading Companies.
� Employee-Owned Company.
� Co-operative Company.
Next, we will reproduce the content, definition and characteristics of the different
structures mentioned earlier and which are available on the following website: http://
www.creatuempresa.org/es-es/paginas/faq.aspx
161 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
161
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Individual entrepreneur
The Individual or Self-Employed Entrepreneur is a natural person who regularly, per-
sonally, directly, on his or her own account and outside of the scope of management
and organisation of another person, carries out an economic or professional activity
for profit, employs or does not employ workers.
It is a classic figure in the business world and represents one of the most frequent
business structures. It is generally associated with self-employment, since the owner
of the company is in turn an employee therein, regardless of the activity and type of
work he or she carries out.
When creating a company, this figure is usually selected by retailer outlets (clothes,
food, stationery, gifts, jewellers, newsagents, etc.) and by professionals such as plum-
bers, electricians, painters, decorators, etc.
• Characteristics:
- Full management control of the company by the owner.
- The legal personality of the company is the same as that of its owner (entre-
preneur), who is personally accountable for all the obligations acquired by the
company.
- There is no differentiation between public equity and private equity (personal).
- It does not require a previous incorporation process. The formalities are initiated
at the start of the business activity.
- The contribution of capital to the company, both in terms of quality and quantity,
is only limited by the entrepreneur.
Joint property entity
A joint property entity is incorporated when an asset or right belongs in co-ownership
to various people and forms part of a business activity jointly carried out. We could
say that it is the simplest form of association between self-employed professionals.
• Characteristics:
- In order to carry out the activity, the existence of a private contract detailing the
nature of the contributions and the ownership interest of each joint owner in the
profit and loss of the joint property entity.
- Minimum contribution is not required. The contribution can consist solely of
assets, but not solely money or work.
- The joint property entity will be incorporated by means of a public deed when
the contribution consists of immovable property or rights in rem.
162 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
162
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
- Pursuant to the legislation in force, they are deemed to be entities subjected
to the special income allocation system of income, regardless of whether they
have legal personality.
Civil Society Organisation
A civil society organisation is a private collaboration contract between two or more
people who want to jointly carry out a profit-seeking activity through this contract,
whereby two or more people jointly invest their capital for the purpose of sharing the
profits between them.
• Characteristics:
- The capital consists of contributions from partners in the form of money, assets
or work, services or activity in general.
- It may or may not have its own legal personality depending on whether their
agreements are public or secret.
- When the agreements are secret, they will be governed by the provisions for
joint property entities.
- They may take any of the forms recognised by the Commercial Code, in accor-
dance with the object for which they are intended.
- The joint property entity will be incorporated by means of a public deed when
the contribution consists of immovable property or rights in rem.
- Pursuant to the legislation in force, they are deemed to be entities subjected
to the special income allocation system of income, regardless of whether they
have legal personality. Since 1 January 2016, civil society organisations must
file income tax returns when they have a commercial goal).
Business Partnership
A co-partnership in which all the partners, under a collective name and a single
company object, undertake to participate, in the established proportion, in the same
rights and obligations, and will be secondarily, personally and jointly liable for the
company’s debts.
• Characteristics:
- It operates under a collective name or company object.
- All the partners have equal ownership interests in the company.
- The company has patrimonial autonomy and covers its debts with its own equity,
although the partners will also be secondarily, unlimitedly and jointly liable for
the company’s debts.
163 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
163
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
- A collective partner who contributes “assets” to the company is called a “funding
partner” and a collective partner who only contributes “industry” (work, services
or activity in general) is called an “industrial partner”.
Private Limited Liability Company
It is a type of commercial company in which liability is limited to the capital contributed.
The capital will be comprised of the contributions of all the partners, divided into
indivisible and cumulative ownership interests.
Assets or economic rights susceptible to economic valuation only may be the object
of social contribution, but in no case work or services.
Shares shall not be treated as securities, nor may they be represented by means of
certificates or book entries, nor may they be called “shares”.
Sole-shareholder private limited liability company
It arises in response to the entrepreneur’s individual aspiration to carry out their indus-
try or trade with limited liability to their creditors.
• There are two types of sole-shareholder private limited liability companies:
- Company incorporated by a sole shareholder, whether an individual or a legal
entity.
- Company incorporated by two or more shareholders, where all the shares have
become the property of a single shareholder.
New enterprise private limited company
• Characteristics:
- It is a speciality of the Private Limited Liability Company (SRL).
- The company object is generic in order to allow greater flexibility in the execution
of the company’s activity without need to amend the company’s bylaws.
- The company name is composed of the surnames and name of one of the
partners plus a unique alphanumerical code (ID-CIRCE) followed by the words
“New Enterprise Private Limited Company” (SLNE).
- Indicative company bylaws may be used to reduce notary and registrar times
to a maximum of 24 hours each.
- There are two forms of incorporation: telematic and in person.
164 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
164
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
- The company will be governed by the shareholders at the Annual General Mee-
ting and managed by a single person or body.
- It may continue its operations in the SRL form by resolution of the shareholders
at the Annual General Meeting and amendment of the bylaws.
Public Limited Liability Company
A commercial company in which the share capital, divided into shares, is comprised of
shareholder contributions, which will not be personally liable for the company’s debts.
• Characteristics:
- Its incorporation is formalised through the execution of a public deed and sub-
sequent registration thereof in the Mercantile Registry.
- The name of a public limited liability company must necessarily include the
expression “Public Limited Liability Company” or its acronym, “S.A”.
- It must keep an Inventories and Financial Statements Book, a Journal (daily
record of operations) and a Minutes Book, which will include all the resolutions
adopted by the shareholders at the Ordinary and Extraordinary Annual General
Meetings and other collective bodies of the company.
- It will also keep a Registered Share Register in which the successive share
transfers will be recorded, as well as the establishment of rights in rem and other
taxes thereon. The company will only treat as shareholders those who have been
entered in the aforementioned register.
Partnership Limited by Shares:
A co-partnership which is defined by the existence of collective partners who contribu-
te capital and work and are secondarily, personally and jointly liable for the company’s
debts, and of limited partners who only contribute capital and whose liability is limited
to their contribution.
• Characteristics:
- It is a community of law in which the partners do not have ownership interests
and have full patrimonial autonomy.
- The prevalence of the collective partners on the company makes it possible to
consider it a co-partnership.
165 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
165
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Employee-Owned Company
Private limited liability companies in which the majority of the capital is owned by the
employees who personally and directly provide remunerated services therein and
whose employment relationship is indefinite.
• Requirements of a company to be classified as an “employee-owned company”:
- The majority of the share capital must be owned by employees who provide
remunerated services under an employment relationship for an indefinite period
of time.
- No partner will hold ownership interests representing more than a third of the
share capital, unless:
� the employee-owned company is initially incorporated by two worker-mem-
bers (each holding 50% of the capital and voting rights) with the obligation to
adapt the company with all the legal requirements in a period of 36 months,
� they are shareholders who are public entities, with a majority public sharehol-
ding, not-for-profit or social economy entities, in which case the ownership
interest may be higher without reaching 50% of the share capital.
- The number of hours/year worked by employees hired for an indefinite period
of time who are not shareholders will not exceed 49% of the total hours/year
worked by the worker-members as a whole. Employees with a disability equal
to or greater than 33% were not taken into account in the calculation of these
percentages.
Co-operative company
A company incorporated by people who become associated, under free adhesion
and voluntary resignation regime, to carry out business activities aimed at satisfying
their needs and economic and social aspirations, with a democratic structure and
operation.
• Characteristics:
- Company name: it will necessarily include the words “Co-operative Company”
or its acronym “S. Coop.”. This name will be exclusive.
- Headquarters: it will be established in the place where it carries out its activity
or centralises its administrative management and direction.
- Incorporation: the company will be incorporated by means of a public deed
that must be registered at the Co-operative Companies Register, whereby it
will acquire legal personality.
166 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
166
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
- Minimum share capital: it will be established in the bylaws and must be fully paid
up from the time of incorporation.
- Shareholder contributions: they will be made in legal tender. If envisaged in the
bylaws or resolved by the shareholders at the Annual General Meeting, they may
also consist of assets and rights susceptible of economic valuation.
- In first-degree co-operative companies, the total amount of contributions from
each shareholder will not exceed a third of the share capital, except in the
case of co-operative companies, not-for-profit entities or companies in which
co-operative companies have majority shareholdings.
After choosing the structure, in the event that we have opted for incorporating a com-
pany, the minimum requirements for executing the incorporation and startup would
be, by way of example, the following:
• Identification of the shareholders who will integrate the company.
• Identification of the people who, in representation of the shareholders, will be pre-
sent at the constituent instrument (they must be granted the necessary powers
and, as appropriate, adopt the resolutions required by the legislation or internal
practices of the country of implementation, if the shareholders are legal persons).
• Name of the company to be incorporated, previously verifying that there is no
other company with the same name in the country of implementation, duration
and registered office thereof.
• Company object or activity to be developed by the new company (it must be veri-
fied that in the country of implementation there are no obstacles to said activity by
companies with foreign capital.
• Liability of the shareholders in case of noncompliance.
• Registration at the relevant registries in the destination countries.
• Obtainment of government permits and licences (competent authorities, stock
exchange).
• Determination of restrictions on foreign investment.
• Specific approvals for certain types of industries or sectors.
• Notarisation of documents. Language problems.
Once we have defined/chosen the type of vehicle/structure through which to develop
the business, we must draft the so-called company bylaws. The company bylaws
are a series of rules that will govern the life of the incorporated company. However,
it should be noted that not all the structures proposed earlier will require drafting
company bylaws (e.g.: Individual entrepreneur).
167 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
167
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
In this connection, it should be noted that notaries have ‘standard’ company bylaws
to facilitate the incorporation process, in addition to additional costs of lawyers to
draft them. As mentioned earlier, the company bylaws can be defined as a set of
standards and rule that govern the life of the company. These bylaws will be limited by
the regulation because, on the one hand, their content will vary between one type of
company and another to adapt to the legal framework and, on the other, the wishes
of the parties that sign them will be limited to the legality in force.
For this reason, drafting the so-called shareholder’s agreement is common practice.
Shareholder’s agreements can be defined as contractual agreement between the sha-
reholders of a company aimed at regulating aspects not included in the bylaws. These
agreements are used to grant greater discretionality to the company’s shareholders
to regulate their relationships. Lastly, it should be noted that these agreements can
be defined at any time during the process, both at the start and once the company
in question is operating on the market.
Circumstances may arise where the parties consider it inadvisable to include them
in the deed of incorporation of the new company so as not to disclose them to third
parties through the Registry. To this end it is advisable to include everything relating
to strategy that will be followed at the company incorporated in the country of imple-
mentation. These agreement are used, inter alia, to regulate the following aspects:
• Private agreements in the decision-making process or in the distribution of share
capital
• Commercial policy
• Financial policy
• Financial situation and solvency of the contributing shareholders/Ways of measu-
ring assets, particularly contributions in kind
• Organisation of the new company
• Profile of the team who will hold positions of responsibility.
• Condition of signing additional contracts with third parties for the incorporation of
the company (particularly Industrial and Intellectual Property: licences, transfer of
technology, transfer of know-how, etc.)
Following are a series of clauses that must be included/considered in the preparation
of the memorandums of understanding or preliminary agreements. They would be
as follows:
Responsibility of the parties:
• Business aspects: applicable legislation vs Legal culture.
• Services, facilities, staff, products provided by each party.
168 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
168
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• Define asset contribution calendars and service provision levels.
• It is preferable to agree upon viable solutions in practice than to request clauses
impossible to fulfil.
• Contributions of the parties in cash or in kind.
• Assumption of costs, demand deposits, employee accounting system.
• Liability of the parties to each other, to the investee company and to third parties.
Term of the contract/pre-contract.
• Legal effects.
• Possible indemnities (normally limited to the contributions made).
Statements and guarantees (reps and warranties):
• Exclusivity agreements.
• Non-competition agreements (during and after the end of the contract/company).
Industrial and intellectual property:
• Protect the distinctive signs in the destination country and at the international level
(WIPO).
• Contractually protect the intangible assets that cannot be the object of registration
(e.g.: know-how, technology transfer, engineering contracts,...).
• Use of licences (software, trademarks, patents, dual-use goods,...) abroad and
manner in which the parties pool them.
• Parties’ rights to market or distribute products or services carried out by the inves-
tee company Transactions between the parties and transfer prices.
• Exist consequences: distribution of contributions, intellectual and industrial property
rights, restrictions to activities carried out in competition.
Verification of the suitability of signing models with recommended clauses:
• Agency, distribution and ICC International Franchising model contracts.
• UNIDO manual-type clauses for drafting mixed company incorporation agreements
in developing countries.
Confidentiality
• Data and information flows that will be placed at the disposal of the other party.
• Determine the manner of developing confidential technical information.
169 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
169
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Protection of personal data:
• International transfers to countries who do not have a level of privacy protection
equal to Spain require a specific contract that includes the standard contractual
clauses included in Decision 2002/16/EC.
• Prohibition to subcontract: a contract similar to that defined in the preceding para-
graph must be signed with each of the companies participating in the treatment.
Determination of the law applicable to the possible controversy:
• Regulation of Rome and Brussels (EU).
• Subject matter susceptible of submission: requires control of imperative right rules.
Determination of the competent jurisdiction vs arbitration (after mediation):
• Ad hoc.
• Institutional.
• National.
• International Commercial (Execution of arbitrary awards. 1958 New York Conven-
tion signatory countries).
• For Investment Protection (Novel and Complex).
Differences between jurisdiction and arbitration:
• Jurisdiction:
- Drawbacks: diversity of legislations, language barrier, slowness,..
- Advantages: enforcement of judgement / adoption of protective measures.
• Arbitration:
- Possibility of appealing to an institutional arbitration with bodies specialising in in-
ternational commercial arbitration: ICC, CIADI, CNUDMI (UNCITRAL), CIAC, etc.
- Arbitration chambers specialising in certain industries.
- Applicable legislation and place of the Arbitration.
- Advantages: speed, the place of Arbitration may be a neutral or more favourable
country for the investor.
- Greater privacy.
170 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
170
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
9.2.5. Authorisations and/or administrative licences
Furthermore, it should be noted that, in accordance with the activities that comprise
the object of the business, certain administrative licences or authorisations may have
to be obtained in order to start it up. In this regard, the casuistry may be very broad,
since the need may arise to request from an environmental administrative authorisation
to a licence to act as a provider of payment services.
These licence obtainment requirement are aimed mainly at those businesses which
have a greater regulatory impact such as banks or insurance, in which the Govern-
ment takes part, in order to grant a series of guarantees to the potential customers
and/or consumers.
9.2.6. Taxation
Another point to bear in mind when undertaking a business project and choosing the
regime that best suits out business model may be determined on many occasions by
the tax impact that the chosen structure may entail.
Therefore, the tax optimisation of the business will be one of the most important points
that must be analysed by a tax expert in order to globally assess the best structure
to start up the business.
9.2.7. New technologies
Next, as mentioned earlier, we understand that it is interesting to develop, in general,
the potential implications, inter alia, of the intellectual and industrial property and
data protection regulations and the law on services of the information society and
electronic commerce relative to entrepreneurial initiatives related to the use of new
technologies and the Internet.
9.2.8. Intellectual Property
Regulation:
• Consolidated Intellectual Property Law (TRLPI) approved by Royal Decree 1/1996,
of 12 April 1996, amended by Law 23/2006, single article, amending the TRLPI
of 1996.
• Law 5/1998, of 6 March, implementing Directive 96/6/EC into Spanish law.
• Directive 96/6/EC, of 11 March 1996, on the legal protection of databases.
171 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
171
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Intellectual property encompasses from the protection of the brand, trademark, web
domain up to copyright.
The legal protection of intellectual property is of vital importance to engage in electro-
nic commercial activities in the so-called “information society”. It is therefore essential
to determine, a clearly as possible, the ownership of the rights that can be inferred
from the contents and information based on new technologies, whose main charac-
teristic is to facilitate the transmission and wide dissemination thereof.
Elements protected by law:
• Graphic designs (website as a whole).
• Information contained.
• Source code (escrow).
• Software (maintenance: corrective evolution, service level agreements).
• Free software.
The law relating to intellectual property envisages moral and patrimonial rights.
In intellectual property protection, the owner is protected by both civil rights and
criminal laws.
Points to bear in mind and actions to be carried out:
• Establish a policy of links to our site, as well as links established from our site to
third-party website as utilities or tools for users for the purpose of limiting the poten-
tial liabilities that may arise from the linked contents (if they are illicit, they must be
removed to avoid liability under Article 17 of the Information Society Services Law)
or from the loss of advertising exploitation rights (inline links, if any).
• Protect, through the declaration of reservation of rights, certain company assets
against possible uses thereof by third parties. The protection of trademarks, names,
logos and contents (images, texts, design, etc.) of the website is a mechanism for
providing proof in the event of counterfeit by external and unauthorised third parties.
• Include limitations of liability on the possible damages that may be suffered by the
user while visiting our website arising from Internet viruses, as well as the collabo-
ration of our company with the competent authorities against possible illicit or har-
mful actions against third parties in bad faith (Article 11 of the Law on Information
Society Services and Electronic Commerce) and/or cause damages to our website.
Aspects relating to industrial property must be considered equally in the performance
of electronic commerce activities. Inventions can be patented and, in the sphere of
electronic commerce, patents on encryption and compression algorithms can filed.
172 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
172
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
However, Article 4.4.c) of Patent Law 4/2015, of 24 July, determines that the plans,
rules and methods for exercising the economic activity, as well as software, cannot
be patented.
9.2.9. Domain names
Another basic matter to be taken into account by Internet operators is the registration
and use of domain names. In this connection, Order ITC/1542/2005 approving the
National Plan on Internet domain names under the country code for Spain (“.es”),
revoking prior Order CTE/662/2003.
• Order ITC/1542/2005), of 19 May, approving the National Plan on Internet domain
names under the country code for Spain (“.es”).
• Flexibilisation of the applicable rules for assigning them, at their three levels,
novelties.
• Non-requirement of association between the domain name and the owner. Anyone
can request them using names or trademarks of other companies and/or people
without prior verification of their legitimacy.
• This does not exempt them from complying with legislation. If a third party claims a
domain name with which to justify an association arising from its company name,
trademark, etc., the applicant may lose the right to the assignment of said domain
name as a consequence of an out-of-court judgement given by a body called
ESNIC (Network Information Center of Spain).
Request assessment in relation to:
• Software licensing contracts (custom development, use, distribution, etc.)
• Legal issues associated with the assignment of domain names.
• Provision of services or web-based content.
• Escrow contracts / notarial snippets / click-wrap contracts.
• General protection of intellectual and industrial property: registrations, patentability
studies, trademark protection (nomenclator).
• Legal protection of databases.
• Legal issues of domain names.
173 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
173
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
9.2.10. Data protection
Another aspect of great importance in recent times both in ‘traditional’ businesses
and in those related to the world of new technologies is the processing of personal
data arising from the company’s operations.
At present, Organic Law 15/1999 on the Protection of Personal Data regulates the
processing of personal data of natural persons, obtained by public and private entities
in the exercise of their functions, preventing the indiscriminate use of this type of data
and imposing sanctions in cases of nonfulfilment of the obligations established therein.
This Organic Law applies to personal data, understood to be any numerical, alpha-
betic, graphic, photographic, acoustic or any other type of information concerning
natural persons, identified or identifiable, and therefore does not apply to data relating
to legal persons.
Personal data protection legislation relates to the following principles:
• Data quality:
• Data collection information rights:
• Consent of the affected party and data security:
• Disclosure of data and access to data by third parties:
• The establishment of minor, serious or very serious infringement of the obligations
imposed by said Law, penalised with fines of up to €601,012.10.
Another aspect worth mentioning is that relating the disclosure of data that implies
an international transfer or personal data, which requires the prior authorisation of the
Director of the Personal Data Protection Agency when the destination country(ies)
does/do not have a level of protection equal to Spain and are not adhered to the
Privacy Shield.
In this connection, it is understood that EU Member States guarantee an adequa-
te level of protection, requiring, in other cases, the corresponding declaration of
the Commission of European Communities or the determination of the adequacy of
the protection offered by the corresponding country by the Spanish Data Protection
Agency.
Notwithstanding the foregoing, it should be noted that, after the approval of the
General Data Protection Regulation (GDPR), the current regulation will be amended in
relation to data protection. Therefore, all companies must adopt measures to adapt to
this new regulation, since it envisages a series of sanctions in cases of infringements
exceeded those currently established by the Organic Data Protection Law. It will
become effective on 25 May 2018.
174 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
174
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
9.2.11. Electronic Commerce
Law 34/2002 on Information Society Services and Electronic Commerce (LSSI).
Law 34/2002 on Information Society Services and Electronic Commerce (LSSI), in
force since 12 October 2002, which transposes into Directive 2000/31/EC of the
European Parliament and of the Council on certain legal aspects of information society
services, in particular electronic commerce, in the internal market.
The LSSI considers an information society service to be provided at a distance,
electronically and at the request of a recipient of services against remuneration, also
comprising those not remunerated by the recipients, insofar as they constitute an
economic activity for the provider. In particular, information society services are con-
sidered to be:
• Contracting of goods and services via electronic means.
• Organisation and management of auctions via electronic means or of virtual sho-
pping centers or markets.
• Management of online purchases made by groups of people.
• Sending of commercial communications.
• Supply of information via telematic channels.
• Video On Demand (VOD), as a service that the user can select online and, in gene-
ral, distribution of content at the request of an individual recipient.
The LSSI will apply to information society services providers established in Spain.
In this connection, the provider will be understood to be established in Spain when
its residence or registered office is in Spain, provided that it coincides with the pla-
ce where the administrative management and direction of its business is effectively
centralised. Otherwise, it will be understood to be the place where said management
is carried out.
Also, the LSSI will apply to the services of providers resident or domiciled in another
State when offered through a permanent establishment located in Spain.
Consequently, the use of technological means located in Spain to provide or access
the service alone will not serve to determine the provider’s establishment in Spain.
Notwithstanding the foregoing, the requirements of the LSSI will apply to the providers
of services established in another EU or EES State when the recipient of the services
is domiciled in Spain and the services affect:
• Intellectual and industrial property rights.
• Broadcast of advertising by collective investment institutions.
175 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
175
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• Direct insurance activities.
• Obligations arising from contracts with consumers.
• Lawfulness of unsolicited commercial communications via email.
Principle of free provision of services and exemption from prior authorisation to provide
the information society services.
Obligations of providers of information society services:
• Have means that will grant the recipients of the services and the competent bodies
easy, direct and free access to identifying information about the provider (company
name, registered office, registry data, employer identification number, etc.), about
the price of the product (indicating if it includes applicable taxes and delivery costs)
and about the codes of conduct to which it is subscribed.
In the case of intermediary service providers, collaborate with the competent bodies
in the interruption of the provision of information society service or content removal.
• Obligations to retain data about connection and traffic generated during a service
provision.
Determining a specific liability system for information society services providers.
• Network operators and access provider will not be responsible for the information
transmitted.
• Service providers which make a temporary backup of data requested by users are
not responsible for the information stored, unless they modify it or grant access
thereto to recipients who do not fulfil, inter alia, the conditions imposed for such
purpose.
• Providers of data housing or warehousing services will not be responsible for the
information stored if they are effectively unaware that said data is illicit or, if aware,
act diligently to remove or impede access to the data.
• Service providers who provide links to contents or search engines will not be
responsible if they are unaware of the illicitness of the activity or the information to
which they make reference or recommend.
• The establishment of a specific system for electronic commercial communica-
tions, notwithstanding the commercial, advertising and personal data protection
legislation in force. Thus, electronic commercial communications must be clearly
identifiable, indicating the natural or legal person on behalf of whom they are sent.
• Furthermore, sending of advertising or promotional communications by email or
other equivalent means of communication not previously solicited or expressly
authorised by their recipients is prohibited.
176 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
176
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• The regulation of online contracting recognises effects to contracts concluded
via said means with the consent and other necessary validity requirements, not
requiring the prior consent of the parties on the use of electronic means. Also, the
following online contracting guidelines are established:
• The requirement whereby a document must be writing will be deemed to be fulfilled
when contained on electronic media.
• Acceptance in court of documents on electronic media as documentary proof.
• The determination of the law applicable to online contracts will be governed by the
rules of private international law.
• A series of obligations are established prior to the start of the contracting pro-
cedure, which affects the information that must be provided on the contracting
procedure.
• The offerer is obliged to confirm receipt of acceptance by means of an acknowle-
dgement email within 24 hours of receiving acceptance.
• Contracts concluded online in which a consumer participates will be presumed
to be concluded at the habitual place of residence. When these contracts are
concluded between business owners or professional, they will be presumed to
be concluded, in the absence of an agreement, at the place where the service
provider is established.
• The recognition of an injunction against conducts contrary to the LSSI that are
detrimental to collective or undefined consumer interests and potentiation of out-
of-court solution of conflicts.
• The establishment of minor, serious or very serious infringement of the obligations
imposed by the LSSI, penalised with fines of up to €600,000.
9.2.12. Online payment
Main issues:
• Security of payments (ssl, net) and conventional payment methods.
• Encryption algorithms (dual-use goods, export restrictions).
• Software licences: virtual POSs.
• Rejection of charges with a credit card made “without the physical presence of a
magnetic stripe”.
• Distance sales: requirement of pre-payment as a differentiating element only for a
customer and at their request.
177 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
177
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
Law 281/2002, of 23 November, on Measures of Reform of the Financial System
which transposes into Directive 2000/46/EC, of 18 September 2000, on the activity
of issuing electronic money, in addition to the prudential control of said entities, which
regulates, inter alia, the following points.
• Clearances for regulating specialities in the online contracting of investment servi-
ces and banking services.
• Electronic money entities.
• Main activity: issue payment methods in the form of electronic money.
• Reserved name (EDE).
• Authorisation by the Ministry of Economy and control and inspection by the Bank
of Spain.
In this respect we understand that it would be necessary to request assessment in
the following subject matter:
• Virtual POS licensing and sublicensing contracts.
• IT outsourcing contracts for the provision of POS financial services (bank, IT
company).
• Service-level agreements for the provision of services.
• Legal assessment for issuing electronic money and establishment of guarantees.
9.2.13. Electronic invoicing
Ministry of Finance Order of 5 December 2002:
• Use of advanced electronic signature systems or any other electronic exchange
system that makes it possible to guarantee authenticity and integrity.
• Concept of electronic invoicing: any electronic document that fulfils the issuance
and content terms and conditions stipulated in Royal Decree 2402/1985.
• The taxpayers are the users.
• Guarantees of authenticity and integrity.
• Authorisation and use of electronic invoicing systems.
• Filing of electronic invoices.
Order EHA/962/2007, of 10 April, developing certain provisions on electronic invoicing
and electronic filing of invoices:
• System of “remittance of electronic invoices”.
178 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
178
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• It clarifies that the express consent of the recipient may be written or verbal.
• In those cases where the recognised electronic signature (RES) is used to send
the invoice: the certificate of good standing of the issuer of the document must
be used (even if issued by the recipient of the invoice or a third party in the name
and on behalf of another).
• Invoices received from third countries:
• System of “filing” of invoices sent electronically.
• The issuer must ensure that there are security copies and contingency plans (acci-
dent or malfunction).
• Legibility: any format or medium must facilitate the decryption or uncoding.
• Full access and without delay: direct query, full access to the information system
(online query).
9.2.14. Taxation and e-commerce
Direct taxation:
VAT - principles:
• Adaptation to current legislation (without new taxes).
• Digitised products: they will be treated like service provisions (not customs).
• Taxation where the consumption takes place.
• Electronic invoicing and registration.
• Simplicity in the fulfilment of formal obligations.
VAT - online sales:
• Principles:
- Treatment like services.
- Taxation instead of consumption (use and wear and tear).
• Problem:
- Who pays the tax?
- Where does the consumption take place?
- How is compliance ensured?
• National / international tax plans.
• Electronic invoice recognition plans.
179 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
179
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• VAT study / customs / indirect taxes.
Indirect taxation
Traditional approach
• Taxation on worldwide income in the country of residence with deduction of foreign
taxes.
• Nature of the income.
• Taxation at the “source” as a non-resident:
• Withholding by the payer
• Easy identification of the tax
- Domicile of the foreign company
• Application of double taxation agreements.
• Application of exemptions of Spanish legislation.
9.2.15. Concept of permanent establishment
• Amendments to Article 5 of the model agreement of the OECD.
• Distinction between a computer or server, which may constitute a permanent
establishment, and the software used by that computer, which may not constitute
a permanent establishment.
• Permanence requirement.
• Independence of existence or non-existence of employees.
• Internet service providers do not constitute permanent establishments because
they will not generally be agents dependent on such companies.
• The websites through which the electronic business is carried out cannot be clas-
sified as permanent establishments.
9.3. Resources for deepening knowledge
Bibliography
• Paniza Fullana, A. Remote procurement and consumer defence. Granada 2003.
• Barriuso Ruiz, C.: eProcurement. Madrid 2002 (2nd edition).
180 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
180
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• Carrascosa López, V., Pozo Arranz, M.A. and Rodríguez de Castro, E.P.: eProcu-
rement: the new contractual horizon. Electronic contracts. Granada 1999. Second
edition.
• Bercovitz Rodríguez- Cano, R. and Leguina Villa, J. (Coordinators): Observations
on the Retailing Law. Madrid 1997.
• Clemente Meoro, M. E. Civil Liability and Online Contracts. Editorial Comares.
• Prada Alonso, J. Consumer protection and civil liability. Ed. Marcial Pons
• De Roselló Moreno, R. e-commerce and consumer protection. Ed. Cedecs 2001.
• Calvo Caravaca, A.L. and Carrascosa González, J. Conflicts of laws and conflicts
of jurisdiction on the Internet. Madrid 2001.
• De Miguel Asensio, P.A. Private Internet Law. Ed. Civitas 2003, 3rd edition.
• Adam Muñoz, M.D. Online consume contract in Community Private International
Law. Consumer Studies, no. 52, 2000, pages 25 to 40.
• Mateu de Ros, R., Cendoya Méndez de Vigo (Coordinators). Internet Law. ePro-
curement and digital signature. Ed. Aranzadi 2003, 2nd edition.
• Martínez Nadal, A. Observations on Law 59/2003 on electronic signature. Ed.
Civitas, 2004.
• García Mas, F.J. e-commerce and digital signatures. Legal analysis of Information
Society services (2nd edition), Lex Nova 2004.
• Santaella López. M. Telecommunications and electronic payment methods. ICADE
magazine, no. 43, January-April 1998.
• García Tesón, P. Sessions of the Escuela Superior de Cajas de Ahorros (Higher
School of Savings Banks) on the LSSI (Information Society Services and Electro-
nic Commerce Law) and electronic signature: latest regulatory developments in
Information Society services. Madrid, 22 and 23 October 2003.
• Doral Gómez, A. Security of the Internet and means of electronic payment. Ed
Pearson Educación, 2003.
• Alvarado Herrera, L. Means of Payment. Revista de Contratación Electrónica:,
2000.04.
• Aparicio Salom, J. Study on the Organic Law on the Protection of Personal Data.
Ed. Aranzadi, 2003 (2nd edition).
• Herrán Ortiz, I. Right to privacy in the new Organic Law on the Protection of Per-
sonal Data. Ed. Dykinson 2002.
• Various Authors. Practical study on the protection of personal data. Ed. Lex Nova,
2005.
181 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
181
certification guidebusiness mentor madri+d
module 9Basic legal concepts for mentoring for technology-based entrepreneurs
• Various Authors. Personal data protection factbook. Ed. Aranzadi, 2003.
• Erdozain López, J.C. Copyright and intellectual property on the Internet. Ed. Tec-
nos. 2003.
De Miguel Asensio, P.A. Private Internet Law. Ed. Civitas 2003, 3rd edition.
• Kahin, B. and Varian Hal R. Internet publishing and beyond: the economics of digital
information and intellectual property Cambridge Publishing, MIT Press, cop. 2000.
• Ribas Alejandro, J. Legal aspects of e-commerce. Ed. Aranzadi 2003, 2nd edition.
• Lenley, Mark A. Software and Internet Law. Gaithersburg, New York: Aspen Law
& Business, 2000.
• Juliá Barceló, R. e-commerce between entrepreneurs: training and proof of elec-
tronic contract (EDI) Ed. Tirant Lo Blanch, 2000.
• Lara Pérez, A. Notes on taxation for e-commerce. Ed. Instituto de Estudios Fis-
cales, 2002.
• Bustos Buiza, J.A. Taxation for e-commerce: Personal Income Tax, Value-Added
Tax, Corporate Tax Publicac. Francis Lefebvre, 2001.
• Oliver Cuello, R. Taxation for e-commerce. Tirant Lo Blanch, 1999.
Links
• Revista de Contratación Electrónica (www.vlex.com)
• www.mcx.es/Polcomer/Comerin/ComercioElectronico/ComercioElectronico.htm
• www.alfa-redi.org/casovirtual/
• Revista Española de Derecho Internacional
• www-derecho.unex.es/biblioteca/Sumarios/esinternacional.htm
• Spanish Royal Mint: www.fnmt.es
• Madrid Chamber of Commerce: www.camerfirma.es
• www.iec.csic.es/criptonomicon/comercio/mediospago.html
• www.agpd.es
• www.datospersonales.org
• www.wipo.org
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
Julio Marco Barroso
183 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
183
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
10.1. Module goals
This module includes:
• An introduction to the concepts and phases of the coaching process applied to
mentoring relationships.
• An analysis of the tools and key elements used in a coaching process, such as the
generation of an adequate context and active and empathetic listening.
• The analysis of other tools and key elements of special relevance in mentoring
relationships aimed at entrepreneurs, such as the art of asking and incitement to
action.
10.2. Introduction to coaching for mentors
With globalisation, uncertainty, competition, new technologies and change in values,
our planet is unrecognisable in most aspects; however, in the sphere of teaching, at
Universities and Business Schools, evolution has been virtually zero.
They forgot to awaken our talents, to teach us how to manage our emotions, to help
us to find the purpose of our life, to make us unique and unparalleled beings.
They forgot to teach us that the answer to everything that happens to us consists of
asking ourselves “Why?”, but rather “What for?”. The first returns us to the past, to
problems, to justifications, and the second to the future, to finding solutions, to action.
Despite all this evolution, modern-day executives continue to lack what Anglo-Sa-
xons call “soft skills” or “non-technical skills” when they reach the corporate world,
because no one has bothered to teach them. It is only once they become executives
when companies, or sometimes the executives themselves, must spend a fortune
to become leaders, to undergo Coaching to leverage their skills and to potentiate
their emotional intelligence, communication, leadership, attitude, commitment and
self-esteem.
Coaching was born to fill this void that neither consulting, nor mentoring, nor mana-
gement, nor psychology can fill.
Throughout this workshop we will work on a global vision of what is Coaching, who-
se scope of action has grown parallel to its popularity, both in organisations and at
particular and personal level.
184 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
184
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
In essence, Coaching is a transformational learning methodology that takes you from
where you are to where you want to go. It is the process of helping people and teams
to take their career to new heights, drawing on their strengths and helping them to
cross their boundaries and exceed their personal limits until reaching their full potential.
The key to connecting to people is, firstly, asking powerful questions and then listening
actively and empathetically. It seems obvious but it is not so easy, as we will see.
We will analyse what is Coaching, what is a Coach, the 11 ICF core coaching com-
petencies that a Coach must have, the Coach’s work, its benefits, why it is in vogue,
how to carry out a Coaching proces and what tools to use in each of the phases of
the process, how to perform a session, the Coach’s toolbox, what is a breakdown
and when it occurs, what are mind maps, values, beliefs and personal judgements
and how to align them with your profession and your life. And, above all, how all this
can help you in a Mentoring process.
10.3. The stages of the coaching process: the “grow” model
The “GROW” Model is a structured model based on solving problems, setting goals
and focusing on results. It is one of the most widely used models in the corporate
and executive coaching world. Sir John Whitmore, who died in 2017, is the reference
coach used by this method, which we can define as follows:
• Goal
We will begin by defining a specific goal that must fulfil the following principles: it
must be measurable and attainable and, at the same time, achievable and must
give rise to a successful experience. To this end, we will ask the following questions:
What do you want? What is your goal?
• Reality
After defining the goal, the next step is to define your current situation. We do
this by asking the following questions: Where am I? What would happen if I don’t
change? What is the cause? What are the consequences if I don’t change this?
• Options (or Obstacles)
Find the options for overcoming the current situation and achieving the goal or
objective: What can I do now? What are my alternatives? Analysing the situation:
What would be the benefits? What are the costs I am willing to assume? What if...?
• Will or Way Forward (Commitment/DECISION)
Define and follow the goal-oriented action plan, stimulating self-motivation and
establishing the commitment to achieving the set goal: What am I going to do?
185 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
185
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
How will I do it? When? Where? With whom will I do it? Finding support: What
obstacles do I have to overcome? What are the probabilities of success?
In the “GROW” Model we use questions, it is an executive method that is simple,
easy to design, use and understand, is valid for any type of goal achievement and to
successfully achieve tangible results.
The difference between a wish and a goal is action: What are you waiting for?
QUESTIONS in the different Phases in the “GROW” Model
The questions for analysing the GOAL are:
• What do you want to achieve in the long term?
• What does success mean to you?
• How much personal control or influence do you have on your goal?
• What could be a significant milestone in the journey towards your goal?
• What do you expect to achieve through your goal?
• How do you intend to measure it?
Next, the questions for analysing REALITY are:
• What is happening now with respect to your goal? When is it happening?
Where is it happening? To what extent? With what frequency?
• Who is involved both directly and indirectly?
• When things go wrong with respect to your goal, what occurs exactly?
• How does your goal affect other people?
• What have you done on this respect to date?
• What results have you obtained?
• What is preventing you from achieving it?
• Is that what is really stopping you?
Next, the questions on your OPTIONS:
• What options have you explored to achieve your goal?
• What else can you do?
• What would happen if you didn’t need money or time or any other resource?
• What resources do you need?
186 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
186
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
Next, the questions for analysing the DECISION are:
• What are your success criteria and measures?
• When exactly would you like to start and end the path to your goal?
• What could prevent you from achieving your goal?
• What personal limitations could you encounter?
• Who should know your plans?
• What support do you need and from whom?
When a coach works with the GROW Model, they can help the person to:
• Identify their own aspirations.
• Diagnose their current situation.
• Identify their limiting beliefs.
• Recognise their possibilities and available resources.
• Determine the actions they want to carry out to achieve their personal and pro-
fessional goals.
• Develop will, desire and intention.
Albert Einstein said that there is a driving force more powerful than steam, electricity
and nuclear power: the will. It is a known fact that will can change the world and move
mountains, but at times that will must be oriented, guided and motivated, which is
why your coach can help you.
10.4. Analysis of the key elements and tools used in a coaching process
10.4.1. How to build trust: context and rapport
Creating the appropriate Context
Tom Peters said that, although technical knowledge is essential, trust is key when
working with people and organisations. Trust is the basis of everything and one of the
best ways of providing it is by creating the appropriate context.
In Capital Risk we say that in order to win the trust of your investors we must firstly
fulfil what we say and then fulfil their expectations.
And why is it so important?
187 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
187
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
Because all our conversations take place within a context and all contexts have an
essential influence on the conversation.
We must firstly create the appropriate context, sharpen our axe and have superficial
conversations before having in-depth conversations. This will open many doors at
personal and professional level.
The greater our ability to create the appropriate context, the easier it will be to achieve
the result. This may not be as evident as it seems, because people to not appear to
be aware of this and, even if they are, it is not enough to know, we must do. Do you
normally dedicate time to creating the appropriate context before and during your
conversations? Think about it!
Processes often fail because people do not take it seriously enough, we go too fast
and do not take enough time to create and generate this context.
This is also the case of magicians: before doing a trick they prepare all the parapher-
nalia to prepare the audience. They do not do the trick directly. Or athletes: before
practising or competing they have to warm up their muscles to avoid injuries and
perform at their best.
The Setting conditions everything. The same applies in a negotiation: you prepare
the setting and talk at the end of the meal, but there are preliminary conversations.
The context exerts influence beneath the level of consciousness. It influences the
subconscious. Without trust there cannot be effective communication. Communica-
tion is deformed.
“One gramme of trust generates one kilo of commitment”
To make a good first impression it is also essential to create the appropriate context.
And the first impression completely conditions the rest of the relationship are the
foundations that guarantee success.
All communication takes place within a context (everything that accompanies what
we say) that has a basic influence, but we are not always consistent with what we
want to achieve and the context we choose to achieve it.
The two key tips to achieving the appropriate context:
1. Always look for the best place and time for a personal or professional conversation.
Analyse your sense of timing! Would you ask your boss for a raise when the com-
pany is laying off workers? Do you talk about having children on your first date?
Where did you propose to your spouse?
188 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
188
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
2. Do not go directly to the point. A good conversation requires time and effort. You
can create context by having superficial conversations that will break the ice and
are the perfect starter for an in-depth conversation.
In short, the context can predispose others in favour or against you. Give it the
importance it deserves and learn to create it.
Rapport: Key to creating a climate of trust
Rapport is the first phase to take into account before starting a coaching session. This
Rapport phase consists of creating a scenario in which the person feels comfortable
and confident, build rapport between them and the coach. The goal is to capture
the spoken language (words) and non-spoken language (body language and tone
of voice) of a person to make them feel comfortable and communicate better by
building rapport between them. To build this rapport, the coach equates their body
language with that of the coachee (breathing, position, movements, etc.) and tone of
voice, sensitively and respectfully without imitating them. The purpose of Rapport is:
connect to the person.
To build rapport we do not have to know how the other person feels, just coordinate
our body language to synchronise with them. This coordination, a balance is biologica-
lly created to bring the person to the coach’s turf. If the coach does not build rapport
with their coachee, the coaching session will lack order and consistency.
By adopting the coachee’s behaviour we achieve two things: first, that the person
feels more comfortable and confident. Second, by “putting ourselves in their shoes”
we can better understand their viewpoint (visual representation) or their way of feeling
things (kinaesthetics) or interpreting reality (auditory), in order to jointly achieve the
goal proposed in our coaching action table.
There are channels through which people perceive the world and which are used by
the coach to help to connect to them and to listen to them more attentively, thereby
respecting their emotions. These channels are: visual, auditory, kinaesthetic or sen-
sory, olfactory and gustatory. The coach needs to detect the channel or channels
through which their customer transmits information in order to focus on them and
build a good rapport.
Rapport using silence: Silence can be as beneficial as dialogue during a coaching
session or during a daily conversation.
Most people need some time to reflect on their answers before voicing their thoughts.
Also, while the person is speaking other thoughts may appear due to not having
thought about the answer in silence.
189 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
189
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
When having conversations on delicate matters it is advisable to establish breaks in
the conversation. This will allow the other person to arrange his or her thoughts better
and also to assimilate new elements that may appear.
One technique is to “Adopt the three-second rule”, i.e. wait three seconds to obtain
an answer before assuming that your question needs additional clarification, and allow
three seconds of silence to pass after the answer before speaking again. The latter
helps the person to think about what they are telling us.
The conclusion is that:
“We cannot communicate effectively without rapport”
10.4.2. We listen but We do not hear: active and empathetic listening
“From listening comes wisdom, and from speaking, repentance.”
Italian proverb
We will now talk about one of the main Coaching and Communication tools, possibly
the most important one because it changes everything, and for which we are hardly
prepared.
First of all, take note of this principle: “The success of a good speaker and captivator
lies in listening and not speaking”. I guarantee that when you master active listening,
your power to influence and captivate others grows exponentially.
The Royal Spanish Academy defines listening as: “paying attention to what you hear”.
Listening is a linguistic act. It is the first act of Language. However, we spend 64% of
our life listening and no one has shown us how to do it. For most people, listening is
waiting for the other person to shut up so we can have our say.
How do you learn more, speaking or listening?
When do you make more mistakes, speaking or listening?
Ernest Hemingway said that we take two years to learn to talk and 40 to learn to listen.
“Nature is very wise, it has given man two ears and a single mouth.”
Chinese proverb
190 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
190
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
Listening is not just hearing, it is a much more complex process and, however, we
want to do several things at the same time and we cannot concentrate. “You go on,
I’m listening...” and naturally, in this way we will not build any type of trust. To listen
well, we have to be present. Without presence, there is no listening. And without
listening, there are no powerful conversations.
Listening is interpreting what we are perceiving and, to this end, it is not enough to
hear words; we must take into account the tone of voice, expressions, gestures,
body language, etc., i.e. everything the other person is not saying. Listening to emo-
tions and body language. When we empathise we become the mirror of the other
person, involuntarily adopting their gestures, their tone of voice, their breathing, etc.
At that moment a rapport is built in which both parties feel closely connected to each
together.
Trust is always generated by listening, but we often think about what we are going
to say instead of listening. According to famous management guru Peter Drucker:
“Many executives think they are marvellous because they are good speakers, but
they don’t realise that real success is achieved by listening well”.
Listening levels
There are different listening levels:
• Biological: it is the physiological type of listening. It is Hearing, which has nothing
to do with listening. Most of the time, due to lack of time or interest, or because
we do not like what is being said, we hear but we do not listen.
• Feigned listening: You are always found out. “You’re not listening to me...”, “You
go ahead, I’m listening”, “Right Dad, what did I just say?”, “Alright, I’m sorry... can
you say it again?”. This used to happen a lot with my young daughters before
becoming a coach.
• Selective Listening: we only listen only to what is in accordance with our beliefs.
We disregard the rest. We filter what suits us.
• Active Listening: We listen and also ask.
• Empathetic Listening: Here we are talking about playing in the premier league.
It is the most difficult and the type we use in Coaching. Be careful not to listen to
ourselves instead of listening to the other. Like we do in the Coaching process, turn
off your internal radio (do not think about or judge what your customer is telling you,
or think about what you are going to answer, or what you are going to ask them)
and focus all your attention on the other person. When you listen to someone, you
must feel that for you it is the most important thing in the world. Moreover, that is
how it should be to achieve excellent listening.
191 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
191
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
What you should do: What you should not do:
Establish eye contact Think about what you are going to answer
Take an interest Judge or argue
Listen with your five senses Interrupt or finish their sentences
Copy their gestures Anticipate and guess what they are going to say
Nod your head Do other things at the same time
Take notes Provide solutions (only if requested)
Ask related questions Become restless
Focus all your attention on them Filter: listen only to what we agree with
Advantages of Active Listening
• Helps to improve our relationship with others.
• Builds trust.
• Stimulates people, since listening to them boosts their confidence and gives them
importance.
• Empowers them Makes them feel important.
• Allows you to obtain more information.
Tip: Listen twice as much as you speak. Listen to their silences, their gestures,
their postures,... and, in order to always verify that you listened to what they wanted
to tell you, verify, summarise it and say: “Let me see if I understood you correctly.”
You will avoid a great many misunderstandings!
Be passionate about what they are saying and you will win their trust and affection.
10.4.3. The art of asking: “powerful questions”
Another great Coaching tool.
In order to ensure effective communication, ask powerful questions that will make
the other person reflect, stir them inside, allow them to speak at length,... that require
more than a yes or no for an answer. We already saw the importance of questions
in the Coaching process, but you must also learn to use them in your personal and
professional life (mentoring, consulting, team leading, etc.) if you want to be successful
and be a great communicator.
192 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
192
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
Turn the art of asking into a habit.
What are powerful questions: (USE THEM!)
What for? How is your current life? Which are your most immediate goals?
What resources do you have to achieve them? What else do you need?
What would be your ideal life? What are you doing to achieve it?
What else can you do? What would you like to maintain? What else?
What would you like to change? And what else? If you’re so interested,
why haven’t you achieved it yet? How do you see yourself in five years’ time?
And in 30 years? If you weren’t afraid, what things would you do?
What can I obtain from my interlocutor if I ask them the right questions?
• Information: your desires, your problems, your situation, your opinion, your
needs…
• Caution: The person speaking should not become distracted
• Empathy: The right questions and good empathetic listening are the best com-
pliment to anyone
• Time: For me to think
• Control: I accompany my interlocutor down the right path
Personal tip: The key to your success lies in asking powerful questions and
listening empathetically.
Why do Coaches ask powerful questions instead of giving advice?
In mentoring for startups, the mentor gives entrepreneurs advice and recommenda-
tions, through a strategic role focused on business goals. Also, their advisor role can
be enriched by coaching techniques and, in particular, by asking powerful questions.
Questions are generative, creative and provide options, while advice narrows the
focus and acts like a funnel.
Questions stimulate reflection and search, help to make us more responsible and
empower us. However, advice rids us of responsibility. Whenever we give advice we
stand above the other; we are transmitting an implicit message: I do not believe in
you, I do not believe that you are capable of finding the answer. Advice generates an
energy that disempowers and weakens.
Coaches unlearn to give advice and learn to ask powerful and generative questions,
while developing an appreciative and trusting look that says: I believe in you, I believe
you have the answers. And then a miracle occurs, the person is empowered, they
193 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
193
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
remain firm and can answer certain questions that make them reflect, look at things
from another perspective, find solutions where we only saw problems.
Advice takes away a learning opportunity. The person receiving the advice misses
the opportunity to find it on their own. The person giving it misses the opportunity
to let go, open up, listen, co-create and possibly learn something new beyond their
own perception.
10.4.4. Incite to action: the importance of doing
Action
The W, like we mentioned in the GROW model, makes reference to something very
important: Will; also, without will, without action we do not progress, we need our
customer’s will (coachee), because as a coach I can give you many indications, orient
you and guide you, but if I do not have your will, your implementation, the coaching
process does not exist. That is why we must establish a detailed action plan
and timing to motivate the coachee and engage them by asking questions
such as:
What are the next steps or the first step you are going to take?
When are you going to start? What are you going to do? How?...
Humans have great resistance to change (“it has always been done that way,” we
think), normally unconsciously. We tend to fall back on what is familiar, known and
can be controlled. Most of the time we know what we have to do but there are many
constraints that impede us from doing it (fears, laziness, uncertainty, habits,...). For
this reason, one of the most important goals of Coaching is to make the customer
aware that they are not acting and get them going.
The energy required to change a Habit (unlearn) is comparable to that required to
escape the Earth’s gravitational pull. Apollo XI consumed more fuel during the first 200
km than during the 400,000 km on its journey to the moon. How to move a stationary
car; moving it is initially very difficult but once started up, there is no stopping it.
An exciting goal is required, an EMOTION (reason leads you to conclusions, emotion to
action) and ideally someone to accompany you (a coach), to get you going and mobi-
lise all the necessary energy to counteract the strong pull of our entrenched habits.
The problem is that... we know what we have to do but we do not do it.
Don’t ask yourself if you know or if you don’t know... The powerful question is: “ask
yourself if you are or aren’t doing it”. That makes the difference.
194 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
194
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
A dream without Action can become a nightmare.
It is not about doing for the sake of doing. We must know how to ACT (there is nothing
worse than a motivated useless person; if you don’t know, don’t touch).
According to Peter Drucker:
“There is nothing so useless as doing efficiently that
which should not be done at all.”
Another problem is that humans are evaluation machines on the one hand and, on
the other, complaining machines.
On the one hand, we look for the meaning of things rather than the solution. We do
not act. This leads us to a vicious circle of INACTION. Also, we normally blame others
to elude our responsibility.
And on the other, we are full of paralysing fear. The problem is that many times fear...
toxic fear, paralyses us and prevents us from acting, taking action. This fear that pre-
vent us from acting is the wall that separates... what you are... from what you could be.
Assertions such as “I’d like to”, “I should”, “I’ll try”... are no good; that is not power,
there is no commitment (a decision is not a wish).
Successful people act and make decisions quickly.
10.5. Resources for deepening knowledge
Recommended readings and cited sources
• The inner game of tennis. Timothy Gallway.
• Coaching for performance. John Whitmore.
• The art of coal-blowing. Leonardo Wolk.
• Language Ontology. Rafael Echeverrería.
• Coaching: tools for change. Robert Dilts.
• Come with me to Itaca. Julio Marco.
• Co-Active Coaching. Augere.
• Mentoring and Coaching. Beatriz Valderrama.
195 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
195
certification guidebusiness mentor madri+d
module 10Mentoring for entrepreneurs and coaching. Process, stages, skills and tools
Websites and references
• www.icfespana.com
• www.portaldelcoaching.com
• www.aecop.es
• Coaching Capital. Capital Radio (103.2 FM) Friday 6:30-7:30 pm.
• ICF Professional Coaching Sessions.
module 11Team management and coaching
Ana Mª Aceituno Alcalá
197 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
197
certification guidebusiness mentor madri+d
module 11Team management and coaching
11.1. Teaching goals
• Understand the different leadership styles.
• Understand the key guidelines of interpersonal communication in teams.
• Analyse the characteristics of the teams as a whole and of the individuals that
comprise them.
• Know Belbin’s Team Roles model for effective team management.
11.2. Team management and coaching
Teams make up organisations of all types. It is the most natural choice for their opera-
tions, just like the human body. However, team management is considered something
“soft” in business spheres. It forms part of the skillset, but not of the essence of the
organisation in its structure as such.
For an entrepreneur it is key to have a talented team and know how to manage it
properly. To this end, they need to know relevant aspects related to:
a) Adapt leadership styles to the company’s needs and teams under their control.
b) Basic communication guideline to build trust and a good climate in the team.
c) Coaching tools such as:
- Team Diagnostic Assessment (TDA) to determine the team’s productivity and
positivity.
- Belbin’s Team Roles to leverage the strengths of the team members insofar as
possible and improve their weaknesses.
11.2.1. Leadership styles
Tom Peters, author of “Leadership”, breaks down the ten essential things that a
leader must do:
1. Say “I don’t know” as a strategic part of the leadership vocabulary. Admitting
not knowing is a sign of strength.
2. See major potential beyond the reigning uncertainty.
3. Do, be an action figure, even if we do not get it right the first time.
198 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
198
certification guidebusiness mentor madri+d
module 11Team management and coaching
4. Fail, accept that mistakes are the price of greatness.
5. Weave, joining people (not giving them orders) is essential in this age of uncer-
tainty and constant change.
6. Plan, reach specific agreements for your subordinates. Use the mantra “be a
mentor, be a mentor, be a mentor!”
7. Act, in a confidence game.
8. Reduce, clarify the confusion that prevents you from focusing.
9. Chill out, rest, avoid “burnout”.
10. Love, express your passion for what you do in every possible way.
This author also cites North American psychologist William James when he affirms that
the most profound human need is to be appreciated. Respect for people is essential.
Most talented people take their skills where they feel most appreciated, because they
have many options to choose from.
Appreciation can be understood in many ways: opportunities, economic compen-
sation, corporate awareness of work/life balance, acknowledgement of work,... in
short, respect.
All this, added to enthusiasm, will guarantee a very positive work environment for
development and high performance.
However, the exercise of leadership is not the same under all circumstances or for
everyone. A leader must act differently depending on the experience and level of
knowledge of the teams and companies. They must adapt to their reality at any given
time.
In his book “Leadership”, Tom Peters mentions three leadership styles:
• Leaders who develop talent.
Those who establish long-term organisational fundamentals. He offers the example
of Jack Welch at General Electric.
• Leaders who sell hope.
This style is based on the cases of Roosevelt, who wasn’t a great economist, and
Churchill, who did not have an innate talent for military strategy. Their common trait
was that they never lost hope in difficult circumstances and times.
199 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
199
certification guidebusiness mentor madri+d
module 11Team management and coaching
• The IPM leaders who Peters calls inspired profit mechanics.
These leaders draw the most extraordinary conclusions from the most unwieldy
and shady datasets of an organisation.
Similarly, these three types of leadership are required: mentor, visionary and operations
genius. Peters calls it the “golden leadership triangle”, which is essential for all
types of organisations.
To this interpretation of the different leadership styles we must add another vision
related to work and relationship.
In this case, he cites Halpin and Winer as the first leaders who approached the
selection of leaders from a group of people with an inquiring mind. On this basis,
Blake and Mouton elaborated their famous grid, which is very useful for determining
leadership styles.
Figure 49. Leadership style according to the degree of interest in people and results.
Interest in PRODUCTION
Vacation club
Teamwork
Beaurocracy Tyranny
Paternalism
Inte
rest
in P
EOPL
ELo
w
Low High
High
TEAMWORK: LEADERSHIP STYLES
1. Impoverished Style
Low interest in personal relationships and low interest in productivity, without grea-
ter involvement or commitment in the work.
200 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
200
certification guidebusiness mentor madri+d
module 11Team management and coaching
2. Country Club Style
The leader shows a high interest in the relationship with the team, neglecting pro-
duction. This implies that there will be a very good work climate, but it may not last
long because there is no production and this is inviable for the company.
3. Produce-or-Perish Style
No interest whatsoever in personal relationships and very interest in results. In this
case, people don’t count, but rather are only work instruments; this situation leads
to personal burnout and erodes the organisation.
4. Paternalistic Style
A style more typical of SMEs and family-run companies where the leadership style
is highly personalistic and paternalistic, with unformal procedures.
5. Teamwork Style
It implies an exact balance between interest in people and results. Care must be
taken with the two variables, starting with considering employees as people.
Effective leadership is based on differentiating well between people, in terms of their
human and professional components, to supervise them more closely -in the case of
junior or incompetent employees- or to delegate based on trust and commitment -in
the case senior employees-.
11.2.2. Johari Window
The Johari Window is a cognitive psychology tool developed by psychologists
Joseph Luft and Harry Ingham to analyse human interaction processes. This model
studies the dynamics of interpersonal relationships to understand and manage com-
munication within a team, seeking to achieve open communication through three
processes:
• Opening.
• Feedback and.
• Discovery.
201 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
201
certification guidebusiness mentor madri+d
module 11Team management and coaching
Figure 50. Johari Window.
OPEN or ARENA BLIND SPOT
HIDDEN or FAÇADE UNKNOWN
Known to self
SELF Receives feedback
THE
GROU
P Re
ceiv
es fe
edba
ck
Not known to self
Know
n to
oth
ers
Not k
now
n to
oth
ers
Communication is structured on four quadrants:
• Two that reflect what others know (open or arena and blind spot) and
• another two that are only known to us (hidden or façade and unknown area).
The open or arena quadrant is the information we share with others through
language.
The blind spot is what others know about us but we ignore. It is advisable to minimise
this area in teams. It is important for people to request and receive feedback and, if
necessary, accept constructive criticism.
In situations of confusion and mistrust, it is precisely in this blind spot where a bad
teamworking environment can be generated.
The hidden or façade quadrant contains information that is known to us but that
we do not tell others because it is not convenient or for fear of not being accepted.
It may be past mistakes, etc.
202 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
202
certification guidebusiness mentor madri+d
module 11Team management and coaching
As in the case of the blind spot, the hidden or façade quadrant also constitutes a
mistrust area in which there may be conflicts, at least latent.
Lastly, the unknown quadrant contains what neither we nor others know in the
present. This information could come from situations out of the ordinary.
Based on the above, time must be dedicated to communication within work teams
to achieve openness, constructive feedback and discovery.
11.2.3. Team diagnosis - TDA (Team Diagnostic Assessment)
One of the many tools used in team coaching is TDA (Team Diagnostic Assess-
ment). It is aimed at diagnosing the situation of a team at any given time, assessing
factors related to work, relationships and team climate from the viewpoint of each
team member.
Productivity is understood as the capacity to act functionally as a team, analysing
the following aspects:
• Team leadership.
• Goals and strategy.
• Alignment.
• Proactivity.
• Decision-making.
• Resources.
• Responsibility.
203 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
203
certification guidebusiness mentor madri+d
module 11Team management and coaching
Figure 51. The seven strengths of productivity. Source: www.teamcoachinginternational.com
7 Productivity
Strenghts
Proactive
Goals & Strategies
Accountability
Leadership
Resources
Decision Making
Alignment
Positivity consists of all the necessary processes and relationships to work as a
team from the viewpoint of:
• Trust.
• Respect.
• Optimism.
• Camaraderie.
• Diversity of Values.
• Communication.
• Constructive Interaction.
204 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
204
certification guidebusiness mentor madri+d
module 11Team management and coaching
Figure 52. The seven strengths of positivity. Source: www.teamcoachinginternational.com
7 Positivity
Strenghts
Trust
Optimism
Communication
Constructive interaction
Respect
Values Diversity
Camaraderie
This tool considers the team as a system with culture and its own rules, with its own
identity and expectations of the team as a whole. It takes a snapshot of the team at
any given time as a starting point for the coaching process.
From that time, a map is elaborated to begin the team’s transformation journey, iden-
tifying the variables on which to establish the different steps to be followed.
205 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
205
certification guidebusiness mentor madri+d
module 11Team management and coaching
Figure 53. Figurative map of Team Diagnostic Assessment. Source: www.objcoaching.com
TDA focuses on creating highly productive work teams that are sustainable over time.
It provides a pattern of the team’s current situation, its strengths and development
areas, as well as a work map for developing as highly productive and positive teams,
and ensuring that these changes are sustainable over time.
11.2.4. Belbin’s Roles Model
In the 1970s, Dr. Meredith Belbin and his team carried out research at Henley Mana-
gement College, where they studied many teams to discover the reason why some
work and others don’t.
Their aim was to discover their functional dynamics to determine whether their pro-
blems could be predicted and avoided and how.
206 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
206
certification guidebusiness mentor madri+d
module 11Team management and coaching
The study was carried out on international management teams over a period of nine
years. Each participant completed psychometric questionnaires to link traits such as
personality and behaviour in order to accurately determine their effect on the team.
As research progressed, the difference between the success and failure of the teams
did not depend on factors such as intellect, but rather behaviour. The research team
identified behaviour patterns or “Team Roles”.
The “Team Role” is a tendency to behave,
contribute and interrelate with others in a certain way
207 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
207
certification guidebusiness mentor madri+d
module 11Team management and coaching
Figure 54. Belbin’s Roles Model® 2014.
208 / 221
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
208
certification guidebusiness mentor madri+d
module 11Team management and coaching
This Team Role model is currently used in multiple organisations worldwide. In this
manner, we leverage our strength to a maximum and improve our weaknesses. Being
aware of the difficulties allows us to avoid them or reduce their intensity.
It should be noted that most of us have a series of “preferred Team Roles” or
behaviours we perform more frequently and naturally.
We also have “Roles capable of being assumed”, which may not reflect our most
natural behaviour, but we can learn them in the event that it is necessary to manage
the team and achieve results.
Lastly, we have “less preferred Roles”, which we must not assume because we
would act against our own nature. Consequently, the effort to be made is significant
and the result poor.
If the work requires Team Roles different to ours, it is advisable to find and work with
other people whose roles are complementary to ours. Since people tend to have
more than one preferred role, a team of four could perfectly represent the nine Belbin
Team Role.
For further information, please click the link: www.belbin.es
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Javier Criado Nesofsky
certification guidebusiness mentor madri+d
210 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
210
12.1. Teaching goals
• Understand the importance of communication to the success of a business project
and analyse the basic concepts of communication as a strategic tool.
• Understand the current context of communication in a world in which all stake-
holders interact in a competitive digital transformation environment and Industry
4.0, with all the tool and trends represented by Web 3.0, and at a moment in time
characterised by Digital Transformation.
• Know the importance of having a communication strategy based on transparency
and dialogue with stakeholders and understand the flow of relevant information
for each context.
12.2. Communication 4.0: Strategic tool
Introduction
The most characteristic feature of this module on Communication 4.0 is that before
even being completed it already needs revision and updating. Such is the speed of
change and innovation in the sphere of economics, technology and evolution of social
uses that communication mechanisms constantly need to be reviewed and updated.
Some conceptual frameworks are more enduring, but much of what we consider
updated knowledge becomes outdated and marginal from day to day. Therefore,
what follows is “work in progress” and we invite readers to endeavour to stay updated
through a constant constructive regeneration effort.
The success of a project depends to a large extent on the entrepreneur’s ability to
communicate effectively with relevant stakeholders, from customers and the market
in general to key employees and service providers, and investors and other potential
funding providers.
All within the broadest framework of the growing awareness that we are living in a
globalised and paradoxically small world, and that our individual and collective action
generate an impact that directly affects everyone collectively and individually, and that
we are becoming increasingly aware of everything almost instantaneously.
The understanding is that Communication 4.0 can be facilitated under the current
technological development, new business paradigms and current social trends.
1. Communication 4.0 and its context,
2. What should be communicated,
certification guidebusiness mentor madri+d
211 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
211
3. Responsible communication or communication in times of crisis.
“How to communicate” is a major factor, but more appropriate for in-person works-
hops or collaboration with graphic design experts in general.
In this module we will outline the first three points that will serve as a framework to
include any other relevant information and that is capable in itself of creating a useful
communication strategy and, above all, adapted to the features of the project and
its development stage.
1. What is Communication 4.0?
Communication 4.0 consists of the techniques and strategies arising from the appea-
rance of what is known as Web 3.0 and that complement the development of the
so-called fourth industrial revolution or Industry 4.0. They are a series of activities
that serve as a basis for developing projects that will align with and grow under
the new paradigm. Communication 4.0 is based more than ever on recognising the
importance of a multi-channel relationship coordinated with all the stakeholders of a
company or business project. Communication 4.0 is an essential part of any digital
transformation project.
Web 3.0 aims to endow the Internet with human abilities and, through new technolo-
gies and applications, create social and environmental benefits. Web 3.0 technologies
are characterised by the intensive use of data, application of artificial intelligence,
appearance of the semantic web and natural language to interact with databases, and
emergence of 3D with its applications such as VR (Virtual Reality) or A (Augmented
Reality). The expression Web 3.0 appeared for the first time in 2006 in an article written
by Jeffrey Zeldman, precursor of standard-based web design, which guarantees that
a website can be used with any browser and on any web-enabled device.
certification guidebusiness mentor madri+d
212 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
212
Figure 55. Elements of the Web 3.0.
Artificial intelligence
Mobility
3D Web Customisation
Semantic Web Database
Web 3.0
Industry 4.0 is the name given to the Fourth Industrial Revolution, emphasising
and accentuating the idea of a growing and adequate digitalisation and cooperation
among all economic production agents. The aim of the Fourth Industrial Revolution is
the implementation of smart factories, capable of better meeting customer demands
and of adapting production processes to current competitive circumstances. The
final result is much more efficient use of resources. The main technological bases of
Industry 4.0 are:
1. Internet of Things (IoT);
2. Cyber-physical or robotic systems;
3. “Maker” culture (DIY culture);
4. Use of software-based simulations of designs and processes; and
5. Use of additive manufacturing or 3D printing.
Industry 4.0 is not confined exclusively to these five points and it is not a consolida-
ted and tested reality, but rather a new paradigm in industrial development that will
give rise to significant social changes in the coming years. The intensive use of the
Internet and cutting edge technologies with the primary aim of developing smarter
and more environmentally-friendly industrial plants and power plants -in short, more
certification guidebusiness mentor madri+d
213 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
213
sustainable- represents the vision to which the Fourth Industrial Revolution aspires,
with production chains that are much more interconnected and aligned with market
supply and demand cycles.
Industry 4.0 concept or new industrial structure was coined at the 2011 Hannover
Trade Fair for the first time and, in 2013, a detailed report describing the concept and
its implications was presented at the same industrial technology fair.
Figure 56. Industry 4.0.
Source: FormaCad.
Digital Transformation
Digital Transformation (DT) consist of new business opportunities that arise on the
back of new technologies. This approach is not only technological, but also implies
new skills both in people and in the reinvention of organisations, and that affect tradi-
tional markets worldwide. DT does not focus on the technology used (Big Data, Cloud,
Internet of Things, mobility, social business), but rather on using that technology to
achieve the company’s strategic goals. Digital Transformation must be linked to a
company’s vision and mission.
certification guidebusiness mentor madri+d
214 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
214
Figure 57. Factors of Digital Transformation.
Source: Delion.
Stakeholders
The term “stakeholder” quickly became popular after being used by Edward Free-
man in his book: Strategic Management: A Stakeholder Approach (Pitman, 1984),
and makes reference to «any stakeholder affected by or that may be affected by a
company’s activities». According to Freeman, these stakeholders must be considered
essential elements in the strategic planning of a company.
Figure 58. Stakeholders.
Stakeholders
Employees
Financial sector
Executives
Society
Governance Suppliers
Customers Shareholders
certification guidebusiness mentor madri+d
215 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
215
The “stakeholder” concept is useful for many reasons. On the one hand, it makes
it possible to segment the impact of the economic activity in each of the social and
economic agents that comprise a heterogeneous set of markets, corporate ecosys-
tems and society as a whole, allowing a rich and varied understanding of the complex
interrelationships between production factors and their interests or motivations.
At times, the requirements or needs of each stakeholder are compatible and harmo-
nised. In other cases they are antagonistic and require explicit or implicit negotiation
to work.
The two most relevant underlying trends faced by stakeholders are globalisation and
increased speed of change.
Globalisation is the result of an increasingly interconnected world. The increased
speed of change is a result thereof. Greater interaction, between more connected
interlocutors, implies faster change and increased general entropy of the world system.
The increased speed of change processes can be understood by analysing the speed
at which innovations or new available products/services have penetrated the market,
reaching, for example, 100 million users (see graph).
Figure 59. Market entry speed of some innovations.
Fuente: ©Statista_es. Key issues for digital transformation in the G20.
certification guidebusiness mentor madri+d
216 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
216
The increased speed of change and acceptance of new elements in the competitive
landscape causes two nearly contrary effects:
1. When a product or service penetrates the market, its acceptance and growth
occurs more rapidly.
2. Market leader status quo is under continuous threat and the need to innovate in
order not to become obsolete is becoming increasingly urgent.
2. What is it relevant to communicate?
In the current market scenario, the marketing and communication activity is based
on an increasingly intense dialogue. The company decides what to communicate in
order to define its mission and product and service offering in order to position itself
in the minds of the individuals who comprise the market. This process maintains
the usual complexity, responding to traditional patterns and also incorporates new
patterns related to the boom of social networks and of multi-channel interoperability
provided by Web 3.0.
The decision of what to communicate, when and, in principle, to whom, is an internal
decision. From that time, the concept of dialogue, marked by new elements such as
virality, “inbound marketing” or “eyeball hang time” has become relevant and makes
messages be amplified, lost or modified, taking on a life of their own.
In a world in which interlocution may be continuous and all control thereover is lost,
messages must be clear, transparency high and the need for differentiation more
important than ever.
Brands are increasingly more the result of continuous interaction and of premeditated
design of messages and interventions aimed at the participation of the individual or
consumer agent in a continuous generation of unique, memorable and communicable
experiences.
Among all the business communication formats, the most demanding and compre-
hensive is probably the elevator pitch. The idea, described for the first time by quality
systems expert Phillip B. Crosby in his book, “The Art of Getting Your Own Sweet
Way” (1981), consists of conveying a clear and stunning idea within a very limited time.
Today, the elevator pitch is the essential element of countless events throughout the
world, where entrepreneurs meet with investors or other stakeholders and describe
their business idea within a limited time of generally between 3 and 10 minutes, using
a slide presentation.
certification guidebusiness mentor madri+d
217 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
217
The effectiveness of the method for transmitting the essentiality of a project, company
or startup in elevator pitch format is so high that it has become the basic tool for initia-
ting the financing process of a very high percentage of innovative companies at their
initial stages. At some primordial stage, practically all the current technology giants,
from Google to Facebook, from Apple to Amazon, were simply a story summarised
in a few slides and told in a few minutes.
The effectiveness of the elevator pitch concept is so high that even the public sector
has begun to use it to assign their R&D&i budgets. Since the beginning of 2018, the
star programme of the European Union, managed by EASME (Executive Agency for
SMEs), to fund innovative projects conceptualised by SMEs (small and medium-si-
zed companies) uses it in its final selection stage. This programme, known as a SME
Instrument, invites some 120 projects to Brussels every four months to defend their
potential in a format consisting of a 10-minute presentation and 20-minute Q&A.
The template used for this elevator pitch consists of ten slides that summarise all
the messages that a company may have or need to convey, regardless of the target
audience or stakeholders.
In fact, the European Union proposes a pitch deck template very similar to that
used by entrepreneurs in any presentation to investors and other stakeholders at any
pitching event.
This template, inspired in traditional investor pitch decks used in Silicon Valley, has
the following basic structure of ten slides or chapters:
1. Purpose of the company
a. What is the mission?
b. Describes the company and its purpose in a single sentence.
2. Problem / Solution
a. What is the customer’s “pain”?
b. Is there currently a need in the Market or an unresolved problem?
c. It describes how its innovation mitigates a pain or meets a customer’s need.
3. Value proposition
a. How do customers value your product/service?
b. Define and assess the specific benefits your customer obtains upon using your
product/service.
4. Market opportunity and risks
certification guidebusiness mentor madri+d
218 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
218
a. How big is the Market potential?
b. Does it project the market size and share that your product/service will achieve?
c. Explain how your product/service will transform the Market?
d. Draw up a list of main risks faced by your innovation and what will be your res-
ponse to address them.
5. Competition
a. Who are your competitors and what is your position with respect to them?
b. Explain how you will overcome the competition.
6. Business model
a. How will you generate sales?
b. Describe your income model, prices, cost structure and when will you begin to
produce income and reach the break-even point.
7. Marketing strategy
a. What are your plans for entering the market and reach your customers?
b. Explain how long you will take to go to market and give some examples of current
market interest in your product/service.
8. Financial projections
a. Detail your projection in terms of sales, customers and market needs.
b. How will the funding received be used?
c. Detail the level and origin of the investment obtained to date and how the ad-
ditional contribution will contribute to the success of the project.
9. Team
a. Who are the most relevant members of the company’s team and other particu-
larly relevant professionals who collaborate (partners, advisors)?
b. Demonstrate that the team has determination, strength and experience to achie-
ve the commercial success of their innovation.
c. Describe the successful experiences of the members of the team in commercial
activities.
10. Conclusion
a. Final remarks to convince and remember.
certification guidebusiness mentor madri+d
219 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
219
In fact, all the messages that a company must convey to any stakeholder makes
reference and fits easily into at least one of these ten essential chapters.
3. Responsible communication or communication in times of crisis
All communications relative to the corporate social responsibility of a company regard-
less of its size may be included and is an evolution of its (1) Purpose or (3) Value
Proposition. In fact, a small market-breaking or disruptive company does not require
the development of a “corporate social responsibility” in the sense in which a large
corporation applies it, since its unequivocal contribution to society depends on its
mere design and purpose, which can be expressed by (1) Purpose.
Lastly, in one of the most complex circumstances that exist, when a very serious mis-
take has been made and the concept of “crisis management” comes into play within
the framework of Communication 4.0, the steps below must be followed:
1. Removal, as appropriate, of incorrect information or that gave rise to the conflict;
2. Apologise via different channels;
3. Apply the concept of transparency without delay;
4. Open constructive dialogue with all the interested parties; and
5. Take responsibility and show commitment to compensation.
12.3. Resources for deepening knowledge
Recommended readings
Books
• Botella, Fernando, “Welcome to the Revolution 4.0: Everything you need to know
to triumph in the digital era”, Alienta Editorial, May 2018.
• Frederick, Peter, “Persuasive Writing: how to harness the power of words”, Prentice
Hall- Pearson, March 2011.
• Freeman, Edward, “Strategic Management: A Stakeholder Approach”, Pitman,
1984.
• Pérez de las Heras, Mónica, “Write, speak, seduce”. LID; Edition: 1, April 2013,
Collection: Acción empresarial.
certification guidebusiness mentor madri+d
220 / 221
module 12Communication to stakeholders 4.0, a key component for the success of a business project
Fundación para el Conocimiento madri+d
EDUCATION AND RESEARCH BOARD · COMUNIDAD DE MADRID
220
Articles
• “INDUSTRY 4.0 and Engineering Professionals”, Madrid, December 2016, Miguel
Obradors Melcior. Engineering and Information Society Committee.
https://iies.es/industria-4-0-y-los-profesionales-de-la-ingenieria/
• “Elevator pitch or elevator speech… in any case, a tool for selling”, Roberto Espi-
nosa, February 2015.
https://www.sintetia.com/elevator-pitch-o-elevator-speech-en-todo-caso-una-he-
rramienta-para-vender/
Reference
• “Industry 4.0”
https://es.wikipedia.org/wiki/Industria_4.0
• “Inbound marketing”
https://es.wikipedia.org/wiki/Mercadotecnia_de_atracci%C3%B3n
• ”SME Instrument Pitch Deck Template”, EASME, EU
https://ec.europa.eu/easme/sites/easme-site/files/eic-pilot-sme-instrument-pitch-
deck-templates.pdf
• “Digital transformation”
https://es.wikipedia.org/wiki/Transformaci%C3%B3n_digital
• “Web 3.0” by Jeffrey Zeldman (January 17, 2006).
https://alistapart.com/article/web3point0
• “Web 3.0”
https://es.wikipedia.org/wiki/Web_3.0
Direción General de Investigación e InnovaciónCONSEJERÍA DE EDUCACIÓN
E INVESTIGACIÓN
Direción General de Investigación e InnovaciónCONSEJERÍA DE EDUCACIÓN
E INVESTIGACIÓN
For an entrepreneur, having the opportunity to find answers to their questions
can mark the difference between avoiding or not avoiding big mistakes,
between managing or not managing their startup more effectively and with
better bottom line results.
Mentors can provide business management contacts or knowledge of pro-
fessional or personal skills that could prove essential at a certain point of
the startup life cycle.
Networks such as the madri+d Mentoring Network, leader of quality
mentoring, facilitate this approximation. Also, the madri+d International
Business Mentor Certification contributes to driving and managing men-
toring networks and programmes more effectively.
This certification guide consists of twelve easy-read training modules which
include techniques and tools in the most relevant knowledge areas, both
for entrepreneurial mentors and for entrepreneurial support programme
managers.