Butterfly valve
-
Upload
chaitannya-mahatme -
Category
Business
-
view
491 -
download
0
description
Transcript of Butterfly valve
1250-SERIES Electrically Operated Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1250-00001
SUDE PUNE \ BANGALORE
MODEL NO.: 1250\200\WAF\CI\SG\BN\PN16 \LIN\SD-4000-20-E\POT\2LS\WCP \CPT200
Quotation Ref. No Quotation Date :
1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.
2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SG Iron Seating material Nitrile Flowing medium Water
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic Linear up to 60* Opening
Fitted with
Sdtork Make Three Phase Electrical Reversible Stayput Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Also Supplied With 3 Phase Panel Having Input Signal: 415 volts 3 Phase AC & 4-20mA Output Signal: 4-20mA
3. ACTUATOR DETAILS
4.1 Series
4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM
1.24 RPM
4.6 Output coupling
E-Type
4.7 Diameter of stem As Per Valve Requirement
4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚ 12 sec./90 deg.
4.10 Manual over-ride
Provided-Hand wheel with auto declutching arrangement
4.11 Travel Limit Switches
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches.
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator.
Provided Continuous type.
4.14 Class of Protection.
IP67
4.15 Duty Regulating
4.16 Weight of the actuator. 50 kg’s
4.17 Mounting Dimensions
4.18
Area of Operation
4.19
Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty Regulating
5.4 Insulation Class F
5.5 Rating
5 OPTIONAL ACCESSORIES
5.1
Feedback Potentiometer
Out put : 100-235 Ohms Provided
5.2
Additional Limit Switches
Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC
Provided
5.3
Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A
Provided
5.4
Remote Position indicator
Available in servo controller Digital : 0-100 %
Provided
5.5
Servo controller (Valve positioner) Panel Mounted
Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.
Provided
5.6 Interface Card Actuator Mounted
Input signal : 4-20 m A, Feed back : 100-235 Ohms,
Provided
5.6 Control Panel / Integral Starter
Integral starter inbuilt in panel Provided
5.7 Local Push Button Station
Provided
5.8
Space Heater Not Provided
5.9
Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection
By the Customer at our works
6.3 Test Certificates & Manuals
2 Sets with Unit
6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
1250-SERIES Electrically Operated Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1250-00001
SUDE PUNE / BANGALORE
MODEL NO.: 1250\200\WAF\CI\SG\BN\PN16\ ONF\SD-4000-20-E\2LS
Quotation Ref. No Quotation Date :
1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.
2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SG Iron Seating material Nitrile Flowing medium Water
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic On/Off Type
Fitted with
Sdtork Make Three Phase Electrical Reversible Stayput Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Supply Voltage: 415 volts 3 Phase AC .
3. ACTUATOR DETAILS
4.1 Series
4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM
1.24 RPM
4.6 Output coupling
E-Type
4.7 Diameter of stem
As Per Valve Requirement
4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚ 12 sec/90˚
4.10 Manual over-ride
Provided-Hand wheel with auto declutching arrangement
4.11 Travel Limit Switches
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches.
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator.
Provided Continuous type.
4.14 Class of Protection.
IP67
4.15 Duty On/Off Type
4.16 Weight of the actuator. 50 kg’s
4.17 Mounting Dimensions
4.18
Area of Operation
4.19
Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty On/Off Type
5.4 Insulation Class F
5.5 Rating 1 Hp
5 OPTIONAL ACCESSORIES
5.1
Feedback Potentiometer
Out put : 100-235 Ohms Provided
5.2
Additional Limit Switches
Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC
Provided
5.3
Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A
Not Provided
5.4
Remote Position indicator
Available in servo controller Digital : 0-100 %
Not Provided
5.5
Servo controller (Valve positioner) Panel Mounted
Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.
Not Provided
5.6 Interface Card Actuator Mounted
Input signal : 4-20 m A, Feed back : 100-235 Ohms,
Not Provided
5.6 Control Panel / Integral Starter
Integral starter inbuilt in control panel Not Provided
5.7 Local Push Button Station
Not Provided
5.8
Space Heater Not Provided
5.9
Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection
By the Customer at our works
6.3 Test Certificates & Manuals
2 Sets with Unit
6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
1258-SERIES Electrically Operated Plastic Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1258-00001
SUDE PUNE / BANGALORE
MODEL NO.: 1258\200\WAF\PVC\PVC\E\PN16 \PROP\SD-4000-20-E\2LS\POT\CPT200\WCP
Quotation Ref. No. Quotation Date :
1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.
2. MAKE SUDE 3 APPLICATION Chemical Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material PVC Disc Material PVC Seating material EPDM Flowing medium Chemical
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic Proportionate
Fitted with
Sdtork Make Three Phase Electrical Reversible Stayput Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Supply Voltage: 415 volts 3 Phase AC .
3. ACTUATOR DETAILS
4.1 Series
4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM
1.24 RPM
4.6 Output coupling
E-Type
4.7 Diameter of stem
As Per Valve Requirement
4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚ 12 sec/90˚
4.10 Manual over-ride
Provided-Hand wheel with auto declutching arrangement
4.11 Travel Limit Switches
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches.
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator.
Provided Continuous type.
4.14 Class of Protection.
IP67
4.15 Duty On/Off Type
4.16 Weight of the actuator. 50 kg’s
4.17 Mounting Dimensions
4.18
Area of Operation
4.19
Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty On/Off Type
5.4 Insulation Class F
5.5 Rating 1 Hp
5 OPTIONAL ACCESSORIES
5.1
Feedback Potentiometer
Out put : 100-235 Ohms Provided
5.2
Additional Limit Switches
Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC
Provided
5.3
Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A
Provided
5.4
Remote Position indicator
Available in servo controller Digital : 0-100 %
Inbuilt
5.5
Servo controller (Valve positioner) Panel Mounted
Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.
Provided
5.6 Interface Card Actuator Mounted
Input signal : 4-20 m A, Feed back : 100-235 Ohms,
Provided
5.6 Control Panel / Integral Starter
Integral starter provided in the panel Provided
5.7 Local Push Button Station
Provided
5.8
Space Heater Not Provided
5.9
Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection
By the Customer at our works
6.3 Test Certificates & Manuals
2 Sets with Unit
6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
1258-SERIES Electrically Operated Plastic Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1258-00002
SUDE PUNE / BANGALORE
MODEL NO.: 1258\200\WAF\PVC\PVC\E\PN16\ ONF\SD-4000-20-E\2LS
Quotation Ref. No. Quotation Date :
1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.
2. MAKE SUDE 3 APPLICATION 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material PVC Disc Material PVC Seating material EPDM Flowing medium Chemical
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic On/Off Type
Fitted with
Sdtork Make Three Phase Electrical Reversible Stayput Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Supply Voltage: 415 volts 3 Phase AC .
3. ACTUATOR DETAILS
4.1 Series
4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM
1.24 RPM
4.6 Output coupling
E-Type
4.7 Diameter of stem
As Per Valve Requirement
4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚ 12 sec/90˚
4.10 Manual over-ride
Provided-Hand wheel with auto declutching arrangement
4.11 Travel Limit Switches
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches.
Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator.
Provided Continuous type.
4.14 Class of Protection.
IP67
4.15 Duty On/Off Type
4.16 Weight of the actuator. 50 kg’s
4.17 Mounting Dimensions
4.18
Area of Operation
4.19
Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty On/Off Type
5.4 Insulation Class F
5.5 Rating 1 Hp
5 OPTIONAL ACCESSORIES
5.1
Feedback Potentiometer
Out put : 100-235 Ohms Not Provided
5.2
Additional Limit Switches
Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC
Provided
5.3
Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A
Not Provided
5.4
Remote Position indicator
Available in servo controller Digital : 0-100 %
Not Provided
5.5
Servo controller (Valve positioner) Panel Mounted
Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.
Not Provided
5.6 Interface Card Actuator Mounted
Input signal : 4-20 m A, Feed back : 100-235 Ohms,
Not Provided
5.6 Control Panel / Integral Starter
Refer Basic Specification Sheet Not Provided
5.7 Local Push Button Station
Refer Basic Specification Sheet Not Provided
5.8
Space Heater Not Provided
5.9
Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection
By the Customer at our works
6.3 Test Certificates & Manuals
2 Sets with Unit
6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
1260-SERIES Pneumatically Operated Butterfly Valve Technical Specifications
Data Sheet Ref. No :SU-1260-00001
SUDE PUNE / BANGALORE
MODEL NO.: 1260\200\WAF\CI\S6\BN\PN10\ LIN\DA20\EPPOS\PT-FB
Quotation Ref. No Quotation Date
1. ITEM Assembly of 2 Way Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator
2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SS316 Seating material Buna Nitrile Flowing medium Water
Pressure 10 Bar
Type of design PN10 Construction
Temperature 80oC
Characteristic Linear
Fitted with
Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean dry air
4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Clean dry air 4.19 Opening and Closing Time 0.65 [Open] & 0.55 [Close]
5 OPTIONAL ACCESSORIES
5.1 2 Wire Position Transmitter
Provided
5.2 Siemens Electro Pneumatic Positioner
Having Input signal: 4-20mA & Output signal: 4-20mA, Inlet Pressure: 6 Bar, Quality of air: Filtered Dry & Clean Air.
Provided
6 GENERAL POINTS 6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :
1260-SERIES Pneumatically Operated Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1260-00002
SUDE PUNE / BANGALORE
MODEL NO.: 1260\200\WAF\CI\S6\BN\PN10\ONF\DA20\ 1184D\4W5P2PDCPOP\06\6.0\BSP\AL\S4\ BN\SPC1\230VAC\GP\ALR\AFR\WPLSB
Quotation Ref. No Quotation Date
1. ITEM Assembly of 2 Way Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator
2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SS316 Seating material Buna Nitrile Flowing medium Water
Pressure 10 Bar
Type of design PN10 Construction
Temperature 80oC
Characteristic On / Off Type
Fitted with
Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated
4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing Time 0.65 [Open] & 0.55 [Close]
5 OPTIONAL ACCESSORIES
5.1 4 Way 5 Port 2 Position Double Coil Solenoid Valve
Of Size ¼”, Aluminum Body, BSP Screwed Having Coil voltage of 230 V AC in General Purpose Housing
Provided
5.2 Air Lock relay Of ¼” Size Provided 5.3 Air Filter Regulator Of ¼” Size Supplied With Gauges Provided 5.4 Weather Proof
Limit Switch Box Consisting of 2 nos micro switches having 1 NO + 1 NC Contacts for Sensing End Position of the Valve
Provided
6 GENERAL POINTS 6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :
1268-SERIES Pneumatically Operated Plastic Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1268-00001
SUDE PUNE / BANGALORE
MODEL NO.: 1268\200\WAF\PVC\PVC\E\LIN\DA20\EP POS\PT-FB
Quotation Ref. No Quotation Date
1. ITEM Assembly of 2 Way Plastic Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator
2. MAKE SUDE 3 APPLICATION Chemical Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material PVC Disc Material PVC Seating material EPDM Flowing medium Chemical
Pressure 10 Bar
Temperature 80oC
Characteristic Linear
Fitted with
Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean dry air
4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered 4.19 Opening and Closing
Time 0.65 [Open] & 0.55 [Close]
5 OPTIONAL ACCESSORIES
5.1 Position Transmitter
Provided
5.2 Siemens make Electro Pneumatic Positioner
Having Input Signal: 60 PSI & 4-20mA, Output signal: 4-20mA
Provided
6 GENERAL POINTS 6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :
1268-SERIES Pneumatically Operated Plastic Butterfly Valve Technical Specifications
Data Sheet Ref. No : SU-1268-00002
SUDE PUNE / BANGALORE
MODEL NO.: 1268\200\WAF\PVC\PVC\E\ONF\DA20\1184D\4W5P2PSCPOP\06\6.0\BSP\AL\S4\BN\SPC1\230VAC\GP\WPLSB
Quotation Ref. No Quotation Date
1. ITEM Assembly of 2 Way Plastic Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator
2. MAKE SUDE 3 APPLICATION Chemical Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material PVC Disc Material PVC Seating material EPDM Flowing medium Chemical
Pressure 10 Bar
Temperature 80oC
Characteristic On / Off type
Fitted with
Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated
4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing
Time 0.65 [Open] & 0.55 [Close]
5 OPTIONAL ACCESSORIES
5.1 4 Way 5 Port Single coil 2 position poppet type solenoid valve
Of ¼” size having Aluminum body with Coil voltage of 230 V AC Supply
Provided
5.2 Weather Proof Limit switch box
Consisting of 2 nos micro switches having 1 NO + 1 NC contacts for sensing end position of the valve
Provided
6 GENERAL POINTS 6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :