BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL...
Transcript of BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL...
MA
NU
AL
WE
LDE
RS
BUTT WELDING MACHINESMANUAL WELDERS
These welders are controlled directly by the operator who, by hand or by means of a
mechanical spring system, supplies the welding force directly to the elements to join.
Their use is recommended when the operator must weld pipes and/or fittings that will not be
subjected to stress due to internal pressure after being laid. They are particularly suitable for
liquid drainage systems in both civil and industrial fields, made in Polyethylene (PE).
• HEATING PLATES page 14
• MINI 160 AC page 16
• MINI 160 SUPRA page 18
• VS 160 AC page 20
• VS 160 SUPRA page 22
• VR 250 page 24
• MAXI 315 page 26
MA
NU
AL
WE
LDE
RS
14
HEATING PLATES
Manual equipment featuring an Aluminium heating plate coated with anon-stick material (PTFE) and a practical, heat insulated plastic handle.Available with a fixed mechanical thermostat (TF) and with an adjustableelectronic thermoregulator (TE), with different working shapes and rangesaccording to the requirements.The TP L 500, available only in the version with an adjustable electronicthermoregulator (TE), is used for welding plastic sheets, but is particularlyindicated in “Waterstop” joins (used in the construction sector).
SUPPLIED WITH
All models are supplied with:- Heating plate;- Fork support.
ON REQUEST (ACCESSORIES)
- Bench vices (the same for all models, except for the TP 300);- Carrying cases in electro-painted steel;- Plate covers;- Footboard (not available for the TP 300 and TP L 500 models);- Gloves (for protection).
TP 125
TP 125/45°
TP 200
TP 300
Fork support
TP L 500
MA
NU
AL
WE
LDE
RS
15
Dimensions (W x D x H)
75 x 65 x 225 mm75 x 65 x 270 mm - TP 300
Weight0,75 Kg
0,80 Kg - TP 300
Bench vices
Dimensions(W x D x H)
410 x 205 x 92 mm
Weight
1,5 Kg
Footboard (not available for the TP 300 and TP L 500 models)
Model
TP 125TP 125/45°TP 200TP 300TP L 500
Dimensions(W x D x H)
300 x 100 x 480 mm260 x 127 x 440 mm295 x 104 x 550 mm350 x 170 x 620 mm240 x 165 x 855 mm
Weight
3,12 Kg3,20 Kg 3,50 Kg4,83 Kg8,63 Kg
Steel cases
(*) Available in 110 V -Single-phase - 50/60 Hzfor TP 125 TE -700 W, TP 200 TE -850 W and TP 300 TE -1300 W
(B) Maximum weldable profile
Steel case
Plate cover
Footboard
Gloves
Power supply (*)Working temperature
Ambient temperatureTime to reach welding temperature
(A) Materials
230 V - Single phase - 50/60 HzTF: 210°C (PE)
TE: 180 ÷ 280°C (A)-5 ÷ +40°C
TF: ~ 15 min. (25 min.TP 300)TE: ~ 10 min. (15 min. TP L 500)
PE, PP, PB, PVDF
TECHNICAL FEATURES
Model
TP 125TP 125/45°
TP 200TP 300
TP L 500
Pipe max Ø(O.D. )
110 mm110 mm180 mm280 mm
500 x 55 mm (B)
Absorbedpower700 W500 W1200 W1300 W1500 W
Dimensions (W x D x H)
140 x 50 x 410 mm140 x 130 x 370 mm200 x 50 x 440 mm300 x 50 x 550 mm270 x 50 x 750 mm
Weight
2,16 Kg1,95 Kg3,21 Kg5,09 Kg2,45 Kg
Dimensions (W x D x H)225 x 195 x 90 mm 160 x 360 x 240 mm - TP 300
Weight0,40 Kg
0,60 Kg - TP 300
Fork supports
Bench vice
MA
NU
AL
WE
LDE
RS
16
MINI 160 AC
An ideal welding machine for drainage pipes up to Ø160 mm.It consists of a machine body with a pressure regulating device, a pair ofclamps, two lateral supports, an electrically controlled milling cutter forlevelling the ends of the pipe and/or fitting with a safety microswitch, anextractable heating plate with automatic device to control the temperature, asliding support, and a tubular frame that acts also as a work bench andprotection when transporting.The MINI 160 AC can also weld fittings, like bends and tees.
SUPPLIED WITH
- Machine body with a milling cutter, lateral supports and service spanners;
- TP 200 TF plate;- Right clamp Ø160 AC;- Left clamp Ø160 AC;- Frame;- Steel case with adapters for clamps and lateral supports
Ø 40-125 mm (Ø 56 and 140 mm on request).
ON REQUEST (ACCESSORIES)
- TP 200 TE plate;- Set of clamps adapters AC Ø56 and 140 mm (4 pcs./Ø)
[Ø supplied singly];- Set of lateral supports adapters Ø56 and 140 mm (2 pcs./Ø)
[Ø supplied singly];- Plate cover for TP 200;- Gloves (for protection).
MINI 160 AC
Machine body
Lateral supports and adapters
TP 200
MA
NU
AL
WE
LDE
RS
17
Weight (Kg) AC clamp adapters (4 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø110 Ø125 Ø1401,43 1,41 1,34 1,33 1,28 1,16 0,91 0,78 0,60Total weight: 10,24 Kg
Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16Total weight : 2,53 Kg
Working rangePower supply Power absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature
Ambient temperatureTime to reach welding temperature(A) Materials
DIMENSIONS (W x D x H)FrameTP 200 plate Steel case with adapters AC clamps set Machine being transported Machine being used
WEIGHTFrameTP 200 plateSteel case with adaptersAC clamps set Machine with “SUPPLIED WITH”
40 ÷ 160 mm230 V - Single phase -50/60Hz
1200 W650 W1850 W
TF: 210°C (PE)TE: 180 ÷ 280°C (A)
-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.
PE, PP, PB, PVDF
525 x 470 x 710 mmSee page 15
200 x 235 x 100 mm170 x 15 x 279 mm525 x 480 x 710 mm800 x 930 x 1140 mm
4,00 KgSee page 15
1,54 Kg2,59 Kg50,60 Kg
TECHNICAL FEATURES
AC clamps and adapters
MINI frame support
AC steel case
MINI being transported
Plate cover and gloves
MA
NU
AL
WE
LDE
RS
18
The meaning of SUPRA
This word identifies the different
type of clamps mounted on this
welding machine. They have been
specifically designed to be able to
lock “branch” fittings (shaped like
a Y): with extractable and
interchangeable jaws, shaped
according to the diameter to weld, it
is possible to lock all branch points
(drawings 1, 2, 3).
MINI 160 SUPRA
An ideal welding machine for drainage pipes up to Ø160 mm.It consists of a machine body with a pressure regulating device, a pair ofclamps, two lateral supports, an electrically controlled milling cutter forlevelling the ends of the pipe and/or fitting with a safety microswitch, anextractable heating plate with automatic device to control the temperature, asliding support, and a tubular frame that acts also as a work bench andprotection when transporting.The MINI 160 SUPRA can also weld fittings like bends, tees and brancheswithout any additional equipment.
SUPPLIED WITH
- Machine body with a milling cutter, lateral supports and service spanners;
- TP 200 TF plate;- Lower right (half) clamp Ø 160 SUPRA;- Lower left (half) clamp Ø160 SUPRA;- Frame;- Steel case complete with extractable upper jaws SUPRA
Ø 40 - 160 mm, lower (half) clamps and lateral supports adapters Ø 40 - Ø125 mm (Ø 56 and 140 mm on request).
ON REQUEST (ACCESSORIES)
- TP 200 TE plate;- Lower (half) clamps adapters Ø 56 and 140 mm (2 pieces/Ø)
[Ø supplied singly];- Left/right extractable upper jaws SUPRA Ø 56 mm and 140 mm
(2 pieces/Ø) [Ø supplied singly];- Lateral supports adapters Ø56 mm and 140 mm (2 pieces/Ø)
[Ø supplied singly];- Plate cover for TP 200;- Gloves (for protection).
Machine body
TP 200
Lateral supports and adapters
MINI 160 SUPRA
drawing 1
drawing 2
drawing 3
MA
NU
AL
WE
LDE
RS
19
Weight (Kg) extractable upper jaws (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 1600,90 0,90 0,90 1,14 1,12 1,14 1,10 1,22 1,12 1,10
Total weight: 10,64 Kg
WEIGHTFrameTP 200 plateSteel case with adaptersLower (half) clamps SUPRAMachine with “SUPPLIED WITH”
40 ÷ 160 mm230 V - Single phase - 50/60 Hz
1200 W650 W1850 W
TF: 210°C TE: 180 ÷ 280°C (A)
-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.
PE, PP, PB, PVDF
525 x 470 x 710 mmSee page 15
535 x 230 x 110 mm174 x 15 x 279 mm525 x 480 x 710 mm800 x 930 x 1140 mm
TECHNICAL FEATURES
SUPRA clamps and adapters
MINI frame support
SUPRA steel case
MINI being transported
Plate cover and gloves
Weight (Kg) clamps adapters (lower half) (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,72 0,71 0,67 0,66 0,64 0,58 0,46 0,39 0,30
Total weight: 5,13 Kg
Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16
Total weight: 2,53 Kg
Working rangePower supplyPower absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature
Ambient temperatureTime to reach welding temperature
(A) Materials
DIMENSIONS (W x D x H)FrameTP 200 plateSteel case with adaptersLower (half) clamps SUPRAMachine being transported Machine being used
4,00 KgSee page 15
3,54 Kg1,33 Kg54,00 Kg
MA
NU
AL
WE
LDE
RS
20
Lateral supports and adapters
VS 160 AC
An ideal welding machine for drainage pipes up to Ø160 mm.
It consists of a machine body with a pressure regulating device, a pair of
clamps, two lateral supports, an electrically controlled milling cutter for
levelling the ends of the pipe and/or fitting with a safety microswitch, an
extractable heating plate with automatic device to control the temperature, a
sliding support and heat protection grid, a steel case that acts as a work
bench and cover when transporting the machine.
The VS 160 AC can weld fittings such as bends and tees.
SUPPLIED WITH
- Machine body with a milling cutter, lateral supports, adapters for
clamps and adapters for lateral supports Ø 40 - Ø 125 mm
(Ø 56 and 140 mm on request) and service spanners;
- TP 200 TF plate;
- Right clamp Ø160 AC;
- Left clamp Ø160 AC;
- Steel case (for transporting and for use as a work bench).
ON REQUEST (ACCESSORIES)
- TP 200 TE plate;
- Clamps adapters AC Ø 56 and 140 mm (4 pieces/Ø)
[Ø supplied singly];
- Lateral supports adapters Ø 56 and 140 mm (2 pieces/Ø)
[Ø supplied singly];
- Plate cover for TP 200;
- Gloves (for protection).
VS 160 AC
Machine body
TP 200
MA
NU
AL
WE
LDE
RS
21
40 ÷ 160 mm230 V - Single phase - 50/60 Hz
1200 W650 W1850 W
TF: 210°C (PE) TE: 180 ÷ 280°C (A)
-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.
PE, PP, PB, PVDF
805 x 565 x 705 mmSee page 15
235 x 20 x 356 mm835 x 565 x 760 mm
1055 x 925 x 1310 mm
20,00 KgSee page 15
2,76 Kg94,45 Kg
TECHNICAL FEATURES
AC clamps and adapters
Steel case
Plate cover and gloves
Weight (Kg) AC clamp adapters (4 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1401,43 1,41 1,34 1,33 1,28 1,16 0,91 0,78 0,60
Total weight: 10,24 Kg
Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16
Total weight: 2,53 Kg
Working rangePower supplyPower absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature
Ambient temperatureTime to reach welding temperature
(A) Materials
DIMENSIONS (W x D x H)Steel caseTP 200 plateAC clamps set Machine being transportedMachine being used
WEIGHTSteel caseTP 200 plateAC clamps setMachine with “SUPPLIED WITH”
The meaning of SUPRA
This word identifies the different
type of clamps mounted on this
welding machine. They have been
specifically designed to be able to
lock “branch” fittings (shaped like
a Y): with extractable and
interchangeable jaws, shaped
according to the diameter to weld, it
is possible to lock all branch points
(drawings 1, 2, 3).
drawing 1
drawing 2
drawing 3
MA
NU
AL
WE
LDE
RS
22
VS 160 SUPRA
An ideal welding machine for drainage pipes up to Ø160 mm. It consists
of a machine body with a pressure regulating device, a pair of clamps, two
lateral supports, an electrically controlled milling cutter for levelling the ends
of the pipe and/or fitting with a safety microswitch, an extractable heating
plate with automatic device to control the temperature, a sliding support and
heat protection grid, a steel case that acts as a work bench and cover when
transporting the machine.
The VS 160 SUPRA can weld fittings such as bends, tees and branches
without the need for any additional equipment.
SUPPLIED WITH
- Machine body with a milling cutter, lateral supports, lower (half)
clamps adapters and lateral supports adapters Ø 40 - Ø125 mm
(Ø 56 and 140 mm on request) and service spanners;
- TP 200 TF plate;
- Lower right (half) clamp Ø 160 SUPRA;
- Lower left (half) clamp Ø160 SUPRA;
- Steel case (for transporting and for use as a work bench);
- Extractable upper jaws SUPRA Ø 40 - Ø160 mm
(Ø 56 and 140 mm on request).
ON REQUEST (ACCESSORIES)
- TP 200 TE plate;
- Lower (half) clamps adapters Ø 56 and 140 mm (2 pieces/Ø)
[Ø supplied singly];
- Left/right extractable upper jaws SUPRA Ø 56 and 140 mm
(2 pieces/Ø) [Ø supplied singly];
- Lateral supports adapters Ø 56 and 140 mm (2 pieces/Ø)
[Ø supplied singly];
- Plate cover for TP 200;
- Gloves (for protection)
VS 160 SUPRA
Machine body
Lateral support
TP 200
MA
NU
AL
WE
LDE
RS
23
TECHNICAL FEATURES
SUPRA clamps and adapters
Steel case
Plate cover and gloves
Weight (Kg) extractable upper jaws (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 1600,90 0,90 0,90 1,14 1,12 1,14 1,10 1,22 1,12 1,10
Total weight: 10,64 Kg
Weight (Kg) clamps adapters (lower half) (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,72 0,71 0,67 0,66 0,64 0,58 0,46 0,39 0,30
Total weight: 5,13 Kg
Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16
Total weight: 2,53 Kg
Working rangePower supplyPower absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature
Ambient temperatureTime to reach welding temperature
(A) Materials
DIMENSIONS (W x D x H)Steel caseTP 200 plateLower (half) clamps SUPRAMachine being transported Machine being used
WEIGHTSteel caseTP 200 plateLower (half) clamps SUPRAMachine with “SUPPLIED WITH”
40 ÷ 160 mm230 V - Single phase - 50/60 Hz
1200 W650 W1850 W
TF: 210°C (PE)TE: 180 ÷ 280°C (A)
-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.
PE, PP, PB, PVDF
805 x 565 x 705 mmSee page 15
240 x 20 x 363 mm835 x 565 x 760 mm
1055 x 925 x 1310 mm
20,00 KgSee page 15
2,02 Kg98,50 Kg
The meaning of SUPRA
This word identifies the different
type of clamps mounted on this
welding machine. They have been
specifically designed to be able to
lock “branch” fittings (shaped like
a Y): with extractable and
interchangeable jaws, shaped
according to the diameter to weld, it
is possible to lock all branch points
(drawings 1, 2, 3).
drawing 1
drawing 2
drawing 3
MA
NU
AL
WE
LDE
RS
24
VR 250
A professional welding machine ideal for medium sized pipes and sewersup to Ø250 mm. It consists of a machine body with a pressure regulatingdevice, a pair of clamps, two lateral supports, an electrically controlled millingcutter for levelling the ends of the pipe and/or fitting with a safety microswitch,an extractable heating plate with automatic device to control the temperature,a sliding support and a steel case that acts as a work bench and cover whentransporting the machine.The VR 250 can weld fittings such as bends and tees. Branches can alsobe welded thanks to the upper extractable jaws (on request) called SUPRA.Available in 110 V and 230 V.
SUPPLIED WITH
- Machine body with a milling cutter, lateral supports, clamps adapters and lateral supports adapters Ø 75 - Ø 250 mm(Ø 140 and 180 mm on request) and service spanners;
- TP VR 250 TE plate;- Right clamp Ø 250;- Left clamp Ø 250;- Steel case (for transporting and for use as a work bench).
ON REQUEST (ACCESSORIES)
- Clamps adapters Ø 140 and 180 mm (4 pieces/Ø) [Ø supplied singly];
- Lateral supports adapters Ø 140 and 180 mm (2 pieces/Ø) [Ø supplied singly];
- Sets of extractable upper jaws SUPRA Ø 75, 90, 110, 125, 140, 160,180, 200, 225 mm (2 pieces/Ø) [Ø supplied singly];
- Wooden case for SUPRA extractable upper jaws;- Plate cover for TP VR 250;- Gloves (for protection).
VR 250
Machine body
Lateral supports and adapters
Heating plate
MA
NU
AL
WE
LDE
RS
25
75 ÷ 250 mm110 V 230 V
Single phase - 50/60Hz1300 W 1300 W450 W 705 W1750 W 2005 W
180 ÷ 280°C (A)-5 ÷ +40°C~ 20 min.
PE, PP, PB, PVDF
805 x 565 x 705 mm450 x 50 x 440 mm340 x 20 x 410 mm390 x 200 x 430 mm835 x 565 x 760 mm
835 x 1240 x 1530 mm
20,00 Kg5,84 Kg4,93 Kg
123,00 Kg5,50 Kg
TECHNICAL FEATURES
Basic clamps and adapters
Steel case
SUPRA extractable upper jaws
Wooden case for SUPRAextractable upper jaws
Weight (Kg) clamps adapters (4 pieces/Ø)Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 2253,80 3,00 2,90 2,80 2,50 2,20 1,90 1,50 1,50
Total weight: 22,10 Kg
Weight (Kg) SUPRA extractable jaws (2 pieces/Ø)Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 2252,30 2,30 2,40 2,40 2,50 2,50 2,50 2,30 2,60
Total weight: 21,80 Kg
Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 2501,20 1,1 1,00 1,10 0,90 0,80 0,70 0,60 0,50 0,40
Total weight: 8,30 Kg
Working rangePower supply
Power absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperatureAmbient temperatureTime to reach welding temperature(A) Materials
DIMENSIONS (W x D x H)Steel caseTP VR 250 TE plateBasic clampsWooden case for SUPRA extractable upper jaws Machine being transported Machine being used
WEIGHTSteel caseTP VR 250 TEBasic clampsMachine with “SUPPLIED WITH”Wooden case for SUPRA extractable upper jaws
MA
NU
AL
WE
LDE
RS
26
MAXI 315
A professional welding machine ideal for medium sized pipes and sewersup to Ø 315 mm. It consists of a machine body with pressure regulatingdevice, a pair of clamps, two lateral supports, an electrically controlled millingcutter for levelling the ends of the pipe and/or fitting with a safety microswitch,an extractable heating plate with automatic electronic device to control thetemperature, a sliding support, a tip-up metal frame on wheels that acts as awork bench and protection when transporting the machine.The MAXI 315 can weld fittings such as bends and tees. Branches can alsobe welded thanks to the single clamps (available on request) indicated forall diameters in the working range.Available in 110 V and 230 V.
SUPPLIED WITH
- Machine body with a milling cutter and lateral supports;- TP 315 TE plate;- Right clamp Ø 315;- Left clamp Ø 315;- Steel frame on wheels (for transporting and for use as a work
bench);- Wooden case containing the clamps and lateral supports adapters
Ø 200 and 250 mm (Ø90 to 280 mm on request), and the service spanners.
ON REQUEST (ACCESSORIES)
- Clamp adapters Ø 90, 110, 125, 140, 160, 180, 225, 280 mm(4 pieces/Ø) [Ø supplied singly];
- Lateral supports adapters Ø 90, 110, 125, 140, 160, 180, 225,280 mm (2 pieces/Ø) [Ø supplied singly];
- Wyes (Y) clamps (for welding branches) Ø 90, 110, 125, 140, 160,180, 200, 225, 250, 280, 315 mm (2 pieces/Ø) [Ø supplied singly];
- Special transport wooden case;- Plate cover for TP 315;- Gloves (for protection).
Maxi 315
Machine body
Lateral supports and adapters
Heating plate
MA
NU
AL
WE
LDE
RS
27
90 ÷ 315 mm110 V 230 V
Single phase - 50/60 Hz3000 W 3000 W800 W 705 W3800 W 3705 W
180 ÷ 280°C (A)-5 ÷ + 40°C~ 20 min.
PE, PP, PB, PVDF
1200 x 680 x 1045 mm580 x 80 x 490 mm413 x 23 x 410 mm510 x 410 x 245 mm
1200 x 680 x 1045 mm1420 x 1300 x 1570 mm1325 x 855 x 1275 mm
30,00 Kg10,56 Kg7,58 Kg7,30 Kg
183,00 Kg75,00 Kg
Working rangePower supply
Power absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperatureAmbient temperatureTime to reach welding temperature(A) Materials
DIMENSIONS (W x D x H)Frame on wheelsTP 315 MAXI TE plateBasic clampsWooden case for adapters Machine being transported Machine being used Special transport wooden case
WEIGHTFrame on wheelsTP 315 MAXI TE plateBasic clampsWooden case for adaptersMachine with “SUPPLIED WITH”Special transport wooden case
TECHNICAL FEATURES
Clamps and adapters
Frame on wheels
Case for adapters and service spanners
Wyes (Y) clamps
Weight (Kg) clamps adapters (4 pieces/Ø)Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 250 Ø 2806,30 6,10 5,90 5,50 5,20 4,80 4,70 3,70 3,00 2,00
Total weight: 47,20 Kg
Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 250 Ø 2801,10 1,00 1,00 0,90 0,80 0,70 0,60 0,50 0,40 0,30
Total weight: 7,30 Kg
Weight (Kg) wyes (Y) clamps (2 pieces/Ø)Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 250 Ø 280 Ø 3155,56 6,28 6,74 7,20 7,62 9,06 9,70 9,50 9,54 13,42 14,14
Total weight: 98,76 Kg