Burgess Accessories

Accessories

CTH/4The CTH/4 accepts chairs stacked on it for transportation enabling the user to wheel the trolley without having to take any of the load.

Features include a strap to retain thestack of chairs in position, a tubularmild steel powder coated frame and rubber wheels.

Accepts Flair.

Dimensions (cm)Length 82 Width 66 Height 110 Weight 12.5kg

CTH/5The CTH/5 is a 2-wheeled chair trolley for transporting stacks of chairs under the rear legs. It has an extra rail incorporated lower down to accommodate chair models with lower backs.

Accepts Forum, Tiani & Vio.


CTH/6The CTH/6 is a 3-wheeled chair trolley for transporting stacks of chairs. The trolley enables the chairs to be moved with maximum ease and minimum effort.

Accepts Cello, Comfortflex, Como, Fiora, Orvia, Siena, Turini & Vario.

Dimensions (cm)Length 84 Width 66 Height 105.5 Weight 11kg

CHAIR TROLLEYS AND TABLE TRUCKSOur range of Chair Trolleys and Table Trucks have been designed to safely transport all our chair and table ranges. There are six Chair Trolleys to choose from and you will find the relevant model for all our chair ranges in the information featured.

Our Table Trucks (overleaf) are designed for easy manoeuvrability and protection from damage whilst the tables are being stored. The TT/F and TTE/M are designed for our Slimfold range and the TTFC is designed specifically for our System-C and Configure-8 ranges.

CTH/8The CTH/8 is a 2-wheeled chair trolley with padded panel for transporting stacks of Evosa chairs. The additional front loop slides under the seat frame to ensure the stack is supported during use. The trolley enables the chairs to be moved with maximum ease and minimum effort.

Accepts Evosa.

Dimensions (cm)Length 80 Width 65.5 Height 125 Weight 10.3kg (approx)

CTH/7The CTH/7 is a 2-wheeled chair trolley with a padded panel for transporting stacks of mesh backed chairs. The trolley enables the chairs to be moved with maximum ease and minimum effort.

Accepts Sentrum.


CTH/1The CTH/1 is a 2-wheeled chair trolley for transporting stacks of chairs under the rear legs.

Features include a tubular mild steel, powder coated frame and rubber wheels.

All models EXCEPT Evosa, Forum, Sentrum, Tiani and Vio.


TT/FDesigned specifically for our Slimfold Tables. The TT/F Table Truck provides a simple solution for rectangular tables, allowing flat, stacked storage for up to 10 tables.

It has the same features as for the TTFC.

TTF/13 144 82 112 31.3kg L < 122 W < 76

TTF/14 175 82 112 32.3kg L < 152 W < 76

TTF/15 205 82 112 33.2kg L < 183 W < 76

MODEL Length Width Height Weight Accepts Tables

The weights of all trolleys are when they are unloaded.All measurements are in cm.

TTFC TABLE TRUCKDesigned specifically for our System-C and Configure-8 Tables, this provides a simple and efficient means of storage and transportation. The TTFC Table Truck range provides a simple solution for rectangular tables, allowing flat, stacked storage for up to 8 tables and has 4 removable handles with foam sleeves to protect hardwood lipping.

Features include:• Tubular mild steel construction throughout, with ply boarding where required.• Pewter hammer finish powder coated frame.• Grey non-marking corner buffers.• Swivel and braked castors.

TTFC 1245 133 89 133 48kg SYS.1 / C.811

TTFC 1260 133 89 133 48kg SYS.5 / C.821

TTFC 1275 133 89 133 48kg SYS.9 / C.831

TTFC 1345 143 89 133 50kg SYS.13 / C.812

TTFC 1360 143 89 133 50kg SYS.14 / C.822

TTFC 1375 143 89 133 50kg SYS.15 / C.832

TTFC 1545 163 89 133 51kg SYS.2 / C.813

TTFC 1560 163 89 133 51kg SYS.6 / C.823

TTFC 1575 163 89 133 51kg SYS.10 / C.833 TTFC 1845 193 89 133 54kg SYS.3 / C.814

TTFC 1860 193 89 133 54kg SYS.7 / C.824

TTFC 1875 193 89 133 54kg SYS.11 / C.834

MODEL Length Width Height Weight Accepts Tables

TTE/MDesigned specifically for our Slimfold Tables. The TTE/M Multipurpose Table Truck range provides ‘on edge’ storage for round, half-round or rectangular tables. There is space for up to 10 tables, and internal divisions allow safe loading/unloading with removable end handles to secure the payload whilst in transit.

It has the same features as for the TTFC.

TTE/2M 130 82 144 36kg DIA122

TTE/3M 160 82 168 38kg DIA152

TTE/4M 191 82 192 39kg DIA183

MODEL Length Width Loaded Weight Accepts Height Tables

BOX

DOUBLE ACCORDION

SHIRRED

DANCE FLOORSWe have a wide range of Dance Floors available from polished wood parquet sections to modern high gloss finishes, as well as an eye catching black and white check design, all supplied with aluminium border trim.

Dimensions (cm)FLORLOK/OUTLOK Caddy 112 x 70 x 127 26kg

PUBLOK Caddy 140 x 68 x 130 26kg

TABLE AND STAGE SKIRTINGOur Table and Stage Skirting is available in three heading styles: box, double accordion or shirred, and is manufactured to your specific size requirements.The skirting is attached with a velcro system, and the fabric can be selected from a large range of colours and fabric finishes. Please ask for our selection of fabric swatch cards, or visit our website where you can download them in pdf format.

CHAIR COVERSOur made to order chair covers give that finishing touch to any event or celebration.

There are four chair cover designs to choose from, and there is a full range of colours in each fabric so you can match your decor or table linen.

A Plain front with ties at the back. Shown here in Buckingham fabric.B Plain front with two pleats at the back and separate sash. Shown here in Dimensions fabric. C Plain front with two pleats at the back. Shown here in Dimensions fabric.D Plain front with butterfly bow and two pleats at the back. Shown here in Dimensions fabric.

A

B

CD

BI-FOLD SCREENSDesigned for room dividing or screening off areas, our Bi-fold Screens can be manufactured to complement your interior colour scheme from a wide range of fabric colours, or suitable fabric can be specified, with full frame finish options.

Please ask for our fabric swatch card and frame finishes card, or visit our website where you can download them in pdf format.Dimensions (cm)Overall Height: 192 Length when fully extended: 241 Length when folded: 121 Overall Width (Castor Mounting): 46

DARK BLUE

BARRIER SYSTEMSWe have three Barrier Systems to choose from:

EXECUTIVE 4-WAY LOOP RANGEThese posts are available in both chrome and brass, incorporating a four way top plate, sign holders and additional wall plate.

CLASSIC 4-WAY LOOP RANGEIncludes most features of the Executive Range, and a choice of either classic ball or contemporary coronet post heads.

ROPESA choice of three standard braided or twisted rope colours in 1m, 1.5m and 2m lengths with chrome snap ends.

BRAIDED ROPES

TWISTED ROPES

FLEXI RANGEThis has an innovative rewinding mechanism, a four directional system, 3m maximum length and remarkably strong tape available in four colours. With this range there are accessories such as sign and brochure holders, and acrylic shelves.

BURGUNDY BLACK

RED BLUE BLACK

CORONET BALL

FOUR DIRECTIONAL SYSTEM

BLACK GREY

RED BLUE

SIGN HOLDERSAvailable in A4 landscape or portrait

MercuryPowder Coated Mild SteelW600 x D400 x H1135mm

Approx Weight 35kg

LECTERNSBurgess have an extensive range of Lecterns available in real wood veneer, melamine laminate, powder coated mild steel and clear acrylic. Some of our lecterns offer you the choice to add optional extras such as cable management, logo and more (where available).

The selection we offer means you are sure to be able to find the perfect lectern for your venue.

Venus20mm Acrylic

W600 x D400 x H1180mmApprox Weight 30kg

JupiterReal Wood VeneerCable ManagementW660 x D530 x H1170mmApprox Weight 50kg Neptune

Real Wood VeneerCable Management / 1 Shelf26mm Wood ThroughoutW600 x D400 x H1150mmApprox Weight 30kg

Mars12mm Acrylic

Frosted Front Panel / Clear Side Panels / One ShelfW600 x D400 x H1180mm

Approx Weight 30kg

SaturnReal Wood Veneer30mm Wood ThroughoutW700x D450 x H1120mmApprox Weight 40kg

FINISH OPTIONSReal Wood VeneerAvailable for Jupiter, Neptune and SaturnMaple Veneer • Ash Veneer • Beech Veneer • Oak Veneer Walnut Veneer • Cherry Veneer • Mahogany VeneerMelamine LaminatesAvailable for Neptune onlyMaple Melamine • Ash Melamine • Beech Melamine Oak Melamine • Walnut Melamine • Cherry Melamine

OPTIONAL EXTRAS - Wood & MelamineCable Management • Logo • Glass Holder with GlassLectern Light Pack • LED Gooseneck Light • Lectern Cover

OPTIONAL EXTRAS - AcrylicLogo • Lectern Light Pack • Lectern Cover • Anti-Static Acrylic Cleaner

MoonOnly available inSolid Indonesian MahoganyW680 x D400 x H1190mmApprox Weight 25kg

SILVER/GREY

LECTRUM L2001 / L2001CLectrum has a unique, dynamic design. Constructed of custom aluminium extrusions and aluminium plate with a dress panel in a range of colours.

Features include:

Built-in document shield with concealed 150mm halogen gooseneck reading light.

Concealed cable management.

Microphone and low voltage power cables concealed within leg, terminated at connection box on lower cross bar.

Dual XLR microphone inputs with on-board phantom power for condenser microphones.

Gently curved, illuminated dress panel in velour fabric, available in a wide range of colours.

Customised logos available.

Adjustable height glides under toes.

Model L2001C onlyProgrammable LCD clock with count-down timer and low level audible alarm.

FINISHES:STANDARD

PREMIUM

…

For the dress panel please ask for the fabric swatch card or visit our website where you can download it in pdf format.

BLACK

GOLD SILVER

OPTIONALCustomised logos available.Curved backing panel fitted

to dress panel with velcro for ease of removal.

Dress panel available in a range of colours.

Low level light

60cm

17cm

90cm

54.5cmNeptuneReal Wood VeneerCable Management / 1 Shelf26mm Wood ThroughoutW600 x D400 x H1150mmApprox Weight 30kg

Burgess Furniture Ltd

Hanworth Trading Estate, Feltham, Middlesex TW13 6EH UK

Telephone +44 (0)20 8894 9231Fax +44 (0)20 8894 2943

Email [email protected] www.burgessfurniture.com

The paper used for this brochure is made from 100% recycled material. Please recycle.

Environmental Policy

As a leading industrial enterprise, we recognise our responsibility to the environment and are committed to achieving best environmental practice.

To this end we actively ensure that the environmental impact all of our materials, processes and products is reduced as much as possible or eliminated. The company is certified to ISO 14001 as well as having membership to ‘Club Green’, the highly acclaimed initiative run by FIRA.

For more information visit our website: www.burgessfurniture.com/environmental-policy.html

Made in Britain

We are proud to say that for over half a century we have made all our chairs and tables to exacting standards in our West London factory.

follow us on:

Environmental Management

Quality Management

MADE IN BRITAIN

Issue date: January 2015

Burgess Accessories

Documents

Transcript of Burgess Accessories