Building the Future · 2020-01-17 · Building the Future PRECAST Concrete Curbing. PRECAST...

2
Pipe Division & Curbing Sales P.O. Box 870 • Scituate, MA 02066 T: 1.800.322.4488 Precast Division P.O. Box 636 • Marshfield, MA 02050 T: 1.800.440.0009 Pembroke Concrete Products Residential Division 793 Washington Street • Pembroke, MA 02359 T: 1.800.698.6463 www.scituatecompanies.com Building the Future PRECAST Concrete Curbing

Transcript of Building the Future · 2020-01-17 · Building the Future PRECAST Concrete Curbing. PRECAST...

Page 1: Building the Future · 2020-01-17 · Building the Future PRECAST Concrete Curbing. PRECAST Concrete Curbing Specifications: Precast Concrete Curbing as manufactured by Scituate Concrete

Pipe Division & Curbing Sales P.O. Box 870 • Scituate, MA 02066 T: 1.800.322.4488

Precast Division P.O. Box 636 • Marshfield, MA 02050 T: 1.800.440.0009

Pembroke Concrete Products Residential Division 793 Washington Street • Pembroke, MA 02359 T: 1.800.698.6463

www.scituatecompanies.com

Building the Future

PRECASTConcrete Curbing

Page 2: Building the Future · 2020-01-17 · Building the Future PRECAST Concrete Curbing. PRECAST Concrete Curbing Specifications: Precast Concrete Curbing as manufactured by Scituate Concrete

PRECASTConcrete CurbingSpecifications:

Precast Concrete Curbing as manufactured by Scituate Concrete Products. The curbing shall yield 5,000 psi in 28 days minimum. Controlled 6 to 7 percent entrained air, reinforced with 2 - #4 rebars design located, fiber enhancement, plus high-range water reducing admixture. Install Precast Concrete Curbing compacted base as per manufacturer’s recommendations.

Specifications:Available in Radii

Standard radii shown below. Each section represents the number of pieces required to complete a 90° radius.

• 2 #4 Rebar• Fiber Reinforcement• Higher Impact Resistant• Structural Integrity

2 #4 RebarsReinforced Design Located to Enhance Load and Impact Deterrence

5/8" Chamfer

Also available in straight lengths3', 4', 5', 6', & 8'

Standard 8’ Length

Lower Installation Costs

Standard size: 18"H x 7"W with 1" in diameter x 3" deep dowel hole.

5/8 Chamfer Both Sides

Interlocking Dowel Pins System

Environmentally Enhancing

Building the Future

Easy to install Standard 8' length, Less Joints

90° 90° 90° 90° 90°

90°90°90°90°

90° 90°

2’ = (3.14) pc.3’ = (4.71) pc.

2’, 3’ - 1 pc.

25’ - 6 pc.

4’, 5’. 6’, 7’ - 2 pc.

30’ - 8 pc.

10’, 12’ - 3 pc.

35’ - 9 pc.

50’- 13 pc.60’- 16 pc.

45’ - 12 pc.

15’ - 4 pc.

40’ - 10 pc.

18’, 20’ - 5 pc.

4’ = (3.16) pc.5’ = (3.93) pc.6’ = (4.75) pc.7’ = (5.50) pc.

10’ = (5.23) pc.12’ = (6.28) pc.

15’ = (5.89) pc.

35’ = (6.11) pc.25’ = (6.28) pc. 30’ = (5.89) pc.

45’ = (5.89) pc.

50’ = (6.04) pc.60’ = (6.00) pc.

40’ = (6.28) pc.

18’ = (5.65) pc.20’ = (6.28) pc.

18"

7"

6"

18"

Special Additional Units Available

Pipe Division & Curbing Sales 1.800.322.4488

Pipe Division & Curbing Sales 1.800.322.4488

Transition18"12"

4', 6'

2', 4' 2'

90° Corner

18"

2'2'

Wheel Chair Ramp12"

6'

18"

18"

3 1/2"

4"

6"

Car Stop

12"

OPENING FOR#5 REBAR PIN

72"

6"

10"LIFTINGHOLE

CHAMFER34"

512"

512"

214"

Straight Curb Inlet

6' X 2' INLET 8' X 4' INLET

2'4'

18"

Single

Double