Building structures report [individual]

BUILDING STRUCTURES

( ARC 2522 / 2523 )

PROJECT 2:

EXTENSION OF AN R.C BUNGALOW

GERTRUDE LEE YUE SIEW

0306265

KEE TING TING

0310019

MEERA NAZREEN MASRULHISHAM

0309630

NURUL JANNAH MASTURAH JAILANI

0310210

SHARIFAH DIYANA SYED HUSSAIN

1006AH78373

SOH YOU SHING

0308010

SURAYYN SELVAN

0309818

YASEEN SYED

0309021

BUILDING STRUCTURES ( ARC 2522/2523 )

TABLE OF CONTENTS


1.0 INTRODUCTION

1.1 Introduction to Project

This project required us to obtain a floor plan of a bungalow with a maximum height

of 3 storeys. Using the floor plans obtained, in groups of 8, we were required to frame the

building and prepare structural plans of the building which includes a foundation plan,

ground floor plan, first floor plan and a roof plan.

Within a subgroup of 2 members, we were required to propose an extension to the

bungalow that must not exceed 30% of the existing floor area and should be of two

storeys. The extension then needs to be framed and we were to identify and quantify the

loads acting on the structures through a beam and column analysis.

1.2 Introduction to the Case Study

We chose to extend one of IJM Land’s projects at Nusa Duta in Iskandar Malaysia

which is a 2-storey bungalow. The project includes a variety of Semi-D’s and bungalows in

a gated community area. We chose the Type B bungalow which includes a built up area of

4401 sq ft and 5 + 1 bedrooms and 6 bathrooms. In total, there a 14 units of the Type B

bungalow that range from RM 2. 722, 000 per unit. The bungalow’s structure is made out

of a reinforced concrete frame and the walls are bricks with a cement plaster finish. The

rood is a combination of a metal roof and reinforced concrete as well.

Development Site Plan of IJM Land’s project at Nusa Duta


1.2.1 Floor Plans

Ground Floor Plan from Brochure ( scale 1:100 )


1.2.1 Floor Plans

First Floor Plan from Brochure ( scale 1:100 )


1.2.1 Floor Plans

Ground Floor Plan ( nts )


1.2.1 Floor Plans

First Floor Plan ( nts )


1.2.2 Perspectives

Exterior Perspective

Interior Perspective


1.2.3 Structural Plans

a) Foundation Plan ( scale 1:100 )



b) Ground Floor Plan ( scale 1:100 )



c) First Floor Plan ( scale 1:100 )



d) Roof Plan ( scale 1:100 )


2.3 Design Proposal (Sharifah Diyana & Jannah Jailani)

2.1.1 Design Brief

We are to propose an extension to the existing building within the given limit of

100m3 per floor and it must reach a total of 30% area of the house. The

extension must also be two storey in height. The extension is proposed to

enlarge existing areas, as well as adding new spaces to the house. The

extension for the ground floor is larger as compared to the first floor. The

ground floor extension includes enlarging the kitchen, pantry and storage

room. The first floor is extended to provide a closet with a balcony as well for

the existing room.


2.1.2 Floor Plans

a) Ground Floor Plan


2.1.2 Floor Plans

b) First Floor Plan


2.1.2 Floor Plans

c) Roof Plan



a) Foundation Plan (scale 1:100 )



b) Ground Floor Plan (scale 1:100 )



c) First Floor Plan (scale 1:100 )



d) Roof Plan (scale 1:100 )


2.1.4 3D Structural Model


2.1.5 Beam Analysis

a) Load Distribution Analysis

Building structures report [individual]

Education

Transcript of Building structures report [individual]