building drawing-Doors and types of door
-
Upload
roshankr92 -
Category
Engineering
-
view
404 -
download
0
Transcript of building drawing-Doors and types of door
ER.Roshan kr. Chaudhary
Faculty
Department of construction engineering
ER. RoshankumarchaudharyR.a.g.c, Thane
Dimensions and Details of Foundation C/S. DPC,
Different Types of Door and Windows
Roof Trusses, Flooring C/S, Staircase, Brick Masonry
Lintel, Arches, Chajja, C/S details of RCC Chajja,
Lintel, Beam, Footing, Column, Slab.
Staircase etc.
Minimum size in W.C/Bathroom.
75cm 190cm
Minimum size of Door in residential Building:
90cm 200cm
Note: Thumb Rule For ht. of the door.
Height=Width+1m
Ledged doors
Ledged and braced doors
Ledged and Framed doors
Ledged Framed and Braced doors
Framed and paneled doors
Flush doors
Louvered doors
Revolving Doors
Sliding Doors
Rolling Doors
Collapsible Doors
Formed of vertical boards battens.(Fig. next)
Battens supported by horizontal members ledges.
Sizes;
Ledges:10-20 cm wide,30mm thick
Battens:10-15 cm wide,20-30 mm thick
Similar to ledged doors but additional diagonal member is attached.
Diagonal member is called Bracing
Braces are 10-15 cm wide and 30mm thick.
It is combination of ledges, Frame and bracing.
Vertical Battens are not used.
Panels are Mounted between the frames.
One of the most popular type of door.
Factory made doors
Consists of rails and styles and pressed under high compression and temperature.
To allow Free passage free passage of air without compromising with Privacy Louver doors are used.
Louvers can be fixed or movable.
4 radiating Doors are attached to a central support.
Used where there is a continuous flow Rush.
Useful For AC halls of malls, Show rooms etc.
Shutter of the door slide instead of opening.
Rollers and guides are used to provide sliding to the door.
Consists of Frames ,A drum and a shutter.
A gear arrangement is also provided for relatively large sized Rolling doors.
Diameter of drum is about 20-30 cm.
Used in shops, Show rooms etc.