Akihabara UDX, 4-14-1, Soto-Kanda, Chiyoda-ku, Tokyo, 101-0021, JapanInternational Division PHONE: 81-3-3526-8316 Home page address: CX-E171

http://www.hitachi-medical.co.jp/english

Hitachi Medical Corporation(Head Office, Kashiwa, Osaka and Mobara works), is certified as complying with the International Environmental Management System (ISO 14001).

● Specifications and appearance of the product are subject to change due to improvement.● Be sure to read the Instruction manual of the product for your proper operation.● Radnext is a registered trademark or trademark of Hitachi Medical Corporation in Japan and other countries.

235

790

2,000

1,121 700

790

2,000

1,026 700

64

05

50

2,000

650 600

550

574 (400)(516st)

510

170

180

0

68

0

152

0（

Tota

l he

igh

t o

f th

e s

up

po

rt c

olu

mn）

Bucky stand/table Scale: 1/70Unit: mm

AS-MK1 Vertical bucky standWeight:100kg

AS-MD1 Elevating floating bucky tableWeight:210kg

AS-MB1 Floating bucky tableWeight:120kg

AS-MA1 fixed bucky tableWeight: 50kg

600(Small base)

1,1

20

(Ve

rtic

al s

tro

ke)

1,1

20

(Up

/dow

n s

tro

ke)

±500: Tabletop right/left movement ±430: Tabletop right/left movement

Detector movement range (right/left)±100

Detector movement range(raight/left)±180

35

0~

90

0:

Tabl

eto

p h

eig

ht

55

0:

Tabl

eto

p h

eig

ht

±75: Tabletop fore/back movement ±75:

Tabletop fore/back movement

General Radiography System

1 2

◎Combination of a high-precision and high-performance 50kW inverter type X-ray high voltage generator

◎X-ray high voltage generator with an easy-to-see large LCD color touch panel

◎Design your system to fit your work environment; choose from our wide product lineup

General Radiography System

New Style, Smooth Control.To give your patients the very best care and to give you a little more peace of mind

when performing daily examinations...

Our aim was to create a more comfortable examination environment for you to meet the

daily and diverse needs of your patients; so we provide general radiography for care of

patient, along with highly accurate examination.

We listened to a wide range of on-the-spot views, and conducted a careful analysis of

the key points. We are confident that our new one-hand grip controller provides easy

operation, and it will certainly improve the workflow of whole examinations.

Hope you enjoy more comfortable and easier examination environment with our new

features.

3

Cost-effective digital angle indicatorSmart set with newly-developed one hand grip controller, in addition to the traditional outer frame handle.Single-handed movements and settings of the X-ray tubes.

Easy-to-see color LCD touch panelAdvanced smart set with an easy-to-see color LCD panel.Check and change radiographic parameters and regions in the examination room.

Motorized collimator in standard configurationA hand-operated Motorized collimator allows manual-like light operation. The collimator size can be selected from the LCD display according to the image size. A bucky center indication laser is also equipped for easier center alignment.

I Smart set smooth single-handed operation

I Advanced smart set (optional) Checking/changing of parameters, in addition to single-handed operation

Height trackingThe height of the X-ray tube assembly automatically follows the vertical movement of the vertical bucky stand.* Optional for Smart set.

Additional options need to be added to

the vertical bucky stand as well.

SID trackingThe X-ray tube assembly automatically follows the vertical movement of the bucky table and enables the SID to be fixed.

* Optional for Smart set.

Vertical strokeNow covering a wide area of 1650mm and with 150mm of extended stroke, the system flexibly meets the requirements of many different examinations.

Rotating mechanism around the supporting columnSince the supporting column can be electromagnetically locked at any desired position, angle-setting for lateral direction is very easy.

4

One-hand grip controller is located at a lower position than the outer frame handle, and allows easy single-handed positioning even at those higher positions that are hard to operate only with outer frame handle.

Using the outer frame handle that is easy to hold even at lower positions or the one-hand grip controller that allows you to change directions freely according to the desired position, you can perform various positioning easily without stressful posture.

By using outer frame handle or one-hand grip controller, smooth movement of the X-ray tube in any direction is possible.

Even when the X-ray tube is located horizontally, the one- hand grip controller operates in a natural way.

Our newly-developed one-hand grip controller enables easy singlehand operation.

Effi cient operation with gentle patient careEquipped not just with the traditional outer frame handle, but also

with the newly-developed one-hand grip controller. After in-depth on-

site research, we developed this new freely-rotating one-hand grip

allowing you to make settings in any position or direction that you

select and also ensure smooth X-ray tube movement.

Smoother operation combining the new outer frame handle with our one-hand grip controllerAssigning your most popular functions to the grip switch improves

operability, and the new outer frame handle and one-hand grip

controller combination, ensures a more comfortable workflow.

Functions / strokes

Line UP

Positioning / movements

A wide variety of functions improve the workflow.

Flexible PositioningSmooth Motion Smooth longitudinal movement

* Stand for control console:Optional

5 6

Light weight and compact designChoose the best system mounting method for your clinic layout; flexible design for a low ceiling height or narrow X-ray room.

Easy positioningSmooth and quick manual control of tube support movements: back and forth, lateral and vertical movements.

* A control console for X-ray tube assembly support is added when incorporating the optional electromagnetic off-lock system.

* Universal Bucky stand YUB-1 (variable SID optional)

Ceiling - floor mounted type

Floor mounted type

Multi-purpose buckyNo more stressful positioning: simply use the bucky stand or table when you start.

Upright chest radiographyFor upright chest radiography just set the SID to 2m.

I Universal set A single unit can accommodate an upright position and recumbent position.

I Compact set Cost-effective and simple confi guration

Electromagnetic off-lock mechanism (Optional)For rapid positioning by switch operation, simply incorporate into the mechanism.

Auto tracking mechanism (Optional)To improve your chest radiography workflow, an auto-tracking mechanism, the same as the ceiling-traveling type is available with the compact floor-support type stand.

Electromagnetic off-lock mechanismThis mechanism allows easy positioning.

An example of layout Scale:1/100Unit:mmCompact set

３５００

２５００

２30０

３0００

An example of layout Scale:1/100Unit:mmUniversal set

Anatomical programAll at the touch of a button...with an anatomical system, up to 960 programs and easy touch panel registration, selecting X-ray radiographic parameters has never been easier.

Sequence programRegister plural radiographic parameters for each patient as a sequence program, and read out with one-touch operation.

Imaging

Combination of a high-precision and a high-performance inverter type X-ray high voltage generator has realized accurate control and multiple functions. An easy-to-use, operator-friendly X-ray high voltage generator.

Interface

A light and easy-to-see large LCD color touch panel is adopted in the control console.Not only X-ray parameters settings, but also region setting by anatomical program can be easily made within the touch panel operation. In addition, radiographic parameters can be set online from other connected imaging systems such as CR. (optional)

Design

The needs for X-ray examinations are versatile, and required functions are different depending on each institution and examination room. To respond to these various needs, Hitachi makes a wide variety of product lineup available.

Automatic exposure detectorHI-AUTO (photo-timer) or an ion chamber can be connected. The adopted digital-control tube voltage compensation and subject body thickness compensation allows obtaining a stable density. (optional)

Smooth operation with large LCD color touch panel.A console with an easy-to-see large LCD color touch panel.The large LCD touch panel for more inntutive and accurate operation.

Setting of radiography conditionBy connecting with imaging systems such as CR and FPD, radiographic parameters can be set online (Optional).

Inverter X-ray high voltage generator

*The NDD method is a method proposed by The Exposure Reduction Committee of IbarakiAssociation of Radiologic Technologists (Chairman: Mr. Takehiko Mori), its coefficientswere introduced and software was developed by Mr. Itsuki Sato of Ibaraki PrefecturalUniversity of Medical Science.

Exposure dose controlExposure dose is controlled quantitatively by the NDD method, and fluoroscopic and radiographic exposure doses are calculated and displayed. An area dosimeter can be connected optionally.

A foldable bucky table is also included.

87

System configuration

General Radiography System Radnext 50 : Optional: Standard configuration

(Note 1) Standard is marked with a ○ ; however, feel free to choose and combine components marked with a △ .

(Note) For details on the electric equipment such as the recommendable capacity of a distribution transformer, contact our sales representative.

Advancedsmart set

Compactset

Universalset

Components Contents Smart set

Specification of the X-ray high voltage generator for Radnext50

DHF-155H4

SX-A300 standard

SX-A300 with LCD

FS-20A

FS-20B

FS-20C

FS-20D

YUB-1

UH-6PC-31E

UH-6FC-31E

UH-6GE-31E

U-6CE-55TB

U-6AC-31TL

285kJ(400kHU)0.6/1.2mm 12°

210kJ(300kHU)0.6/1.2mm 12°

140kJ(200kHU)0.6/1.2mm 17°

100kJ(140kHU)1.0/2.0mm 17°

210kJ(300kHU)0.6/1.2mm 12°

Motorized collimator

Manual collimator

Nominal max. power

Short-time rating

Technique selection

Tube voltage/Tube current

Timer

Anatomical program

Sequence program

Number of connectable X-ray

tubes

X-ray tube control

Self-diagnostic function

50kW

80kV・630mA/100kV・500mA/150kV・320mA

Max. 8 types

40～150kV (1kV step)/10～800mA (20 or 39 steps)

1ms～8s (79 steps)

120 types for each technique (Max. 960 types)

Max. 120 types × Max. 12 stages

With the high voltage switcher (optional) combined, up to two tubes

can be controlled.

CPU always monitors permissible load data corresponding to

selected X-ray tube assembly and radiographic parameters.

CPU measures irradiation mAs to calculate and control residual

anode heat capacity of each X-ray tube connected.

Provided with protective and failure diagnosis functions by CPU

Radnext50

Power requirements

200/220/240±10% 380/415/440/480±10%

Options

Control stand

Ion chamber: up to 3 sheets connectable (3 fields/1 sheet)

HI-AUTO: up to 4 ch connectable

50/60Hz

Radnext50

3 φ 200V series

200/220/240±10%

1 φ 200V series 3 φ 400V series

Rated supply voltage

Rated supply frequency

X-ray high voltage generator

X-ray tube support

50kW invertor

Ceiling traveling type

(SID variable, optional)Universal type

Floor-mount type

X-ray tube assembly(Note 1)

X-ray variable collimator

Automatic exposure detector

CR/RIS connection, function to connect the area dose meter

Wall/floor-mount type

Wall/floor traveling type

Ceiling/floor traveling type

Floor trabeling type

Built-in full-size FPDThe FPD can be set and used on an upright bucky stand / bucky table (floating type). Any microscopic affected region can be clearly visualized by high-definition FPD with a 139μm pixel size. The wide exposure area, approximately 43cm x 43cm, is ideal for the larger patient, and chest and pelvis examinations.

Selecting the scintillator best suited to your needs

We provide a cost-effective model, and a cesium iodide (Csl) scintillator model (built-in full sized FPD only) for lower dose X-rays.

An example usage on the vertical bucky stand

An example usage on the floating bucky table

An example usage with the FPD removed

Multipurpose cassette-sized FPDA truly versatile FPD; it can be mounted, simply placed on the examination table, or held by the patient.

＋ FPDpanel

Digitalradiography

(Note)

AS-MK1 Vertical bucky stand AS-MA1 fixed bucky table AS-MB1 Floating bucky table AS-MD1 Elevating floating bucky table

Hitachi also provides support for system digitization.Drawing upon our years of experience, we will configure the system best suited to your needs, including FPD, any equipment to be combined and image processing.

Evolving into a digital radiography system by combining with FPD.

Many different upright bucky stands and bucky tables are available for you to choose to best suit your use and examination room layout.

Variation　A wide variety of equipment to suit your needs and clinic layout (Optional).

(Note) FPD and digital radiography units are optional.

＊ The cassette FPD can be combined with the existing upright bucky stand/bucky table.For more information about combining the FPD with the existing upright bucky stand/bucky table, contact our sales representative.

109

X-ray tube support unit Scale: 1/70Unit: mm

X-ray high voltage generator

35086

155.5

ＣＮ

240

X-ray control unit　 Weight: Approx. 215kg（Depends on system configuration.）

Control console with stand(Optional)　 Weight: 14kg

Control console　 Weight: 5kg

700 480

320 360

1068

Stroke250

2230

700

720

220

Ceiling-suspended type for the smart set/advanced smart set (SX-A300)

Weight:365kg(standard)~490kg(Max)

Wall-floor mounted type for the Compact set (FS-20B)

Weight: 130kg (excluding X-ray tube assembly, X-ray variable collimator.)

Universal Bucky stand YUB-1 (SID variable, optional)

Weight: 290kg (excluding X-ray tube assembly, variable collimator, supporting fork,

high voltage cable.)

1,120 Note 1 1,108 Note 1

2,000

600

825

1,156

(520 Note 2)

400~

1,53

0

594

330

264

Note 1: When SID is 2m　Note 2: When SID is 1m

980 Note 11,020 Note 1

(480 Note 2)

12

287

Rotationcenter

Foculspot

442

249

movement range 299 to 3375(In case of standard length: 3950)

(In case of standard length: 2000)movement range 257 to 1543

Focal spot(+90°rotation)

External ceiling rail 3950 (min. 1000 to max. 6000)

Inte

rna

l mov

abl

e r

ail

20

00

(min

. 10

00

to m

ax.

40

00

)

12

1800

86

0 to

25

10F

oca

l sp

ot

mov

em

en

t ra

ng

efo

r d

ecu

bitu

s ra

dio

gra

phy

84

8 to

24

98

Fo

cal s

po

t m

ove

me

nt

ran

ge

for

up

rig

ht

rad

iogr

ap

hy

Turningradius

1,800: Wall rail 250Ceiling surface

Floor level2,200: Floor rail

Str

oke

1,2

00

Wa

ll su

rfa

ce

20

or

mo

re

Scale: 1/70unit: mm

Scale: 1/70unit: mm

Scale: 1/20unit: mm

Specification of the ceiling suspended X-ray tube support unit for Radnext50

7 segments display

Manual collimator

LCD touch-panel

Motorized collimator

3075mm (For standard rail: 3950mm) (Electromagnetic off-lock system)

1285mm (For standard rail: 2000mm) (Electromagnetic off-lock system)

±180°/ Click stop at every 45° (Electromagnetic off-lock system)

±180°/ Click stop at every 90° (Electromagnetic off-lock system)

－

Option

○

○

Smart set (standard)

Advanced smart set (with LCD)

1650mm (Note 1)

2800mm

Height (Upright position)

SID (Recumbent)

(Note 1) 1,600mm when the auto-tracking function is activated.

Control area display

X-ray collimator

Vertical stroke

Longitudinal stroke

Transverse stroke

Rotation around the support arm

Rotation around the support column

Specifications of the floor mounted type X-ray tube support unit for Radnext50

1200mm

250mm

○

1500mm

Manual fixing type

Compact set

Standard

Wall/floor traveling

FS-20B

2230mm

1500mm

Wall/floor-mount type

FS-20A

2150mm

−

Option

Ceiling/floor traveling

FS-20C

2230mm

Floor traveling

FS-20D

2180m

Type

Unit model number

Overall height of support column

X-ray tube vertical stroke

X-ray tube lateral stroke

X-ray tube back and forth (arm) stroke

Locking methodElectromagnetic

Electromagnetic-off-lock

Auto-tracking function (Height direction only)

Option

○（Up/down, Right/left, Fore/back）

○（Up/down ,Fore/back）

○（Up/down, Right/left, Fore/back）

○（Up/down, Right/left, Fore/back）

Auto-tracking function

Programmable brake system function

Recommendable standard ceiling height

Auto collimation function

The ceiling suspended X-ray tube support unit SX-A300 is compact and easy to operate in the examination room.A stand-alone X-ray high voltage generator requires less installation space, leaving a more spacious examination room.

An example of a system confi guration for a ceiling suspended X-ray tube support unit (Smart set)