Bucket Capacity : 0.60 - 1.40 m Engine Power : 200 kW / 2,100 … · Values are for HD arm (3.10m)...
Transcript of Bucket Capacity : 0.60 - 1.40 m Engine Power : 200 kW / 2,100 … · Values are for HD arm (3.10m)...
SK300LC-10/SK300NLC-10
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with speci�cations that di�er from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer.Due to our policy of continuous product improvements all designs and speci�cations are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice.
Inquiries To:
September 2018 | POD001
Veluwezoom 151327 AE AlmereThe Netherlandswww.kobelco-europe.com
KOBELCO CONSTRUCTION MACHINERY EUROPE B.V.
0.60 - 1.40 m3
200 kW / 2,100 min-1
Bucket Capacity :
Engine Power :
30,200 - 33,200 kg
Operating Weight :
1 2
productivityIncrease in
means“Power”
Higher fuele�ciency
means“E�ciency”
* NOx: Nitrogen Oxide
Power Meets E�ciency
To urban centers, and to mines around the world. Kobelco’s all-out
innovation brings you durable earth-friendly construction machinery that’s
equal to any task, at sites all over the planet. Increased power and even
greater fuel economy bring higher e�ciency to any project. Kobelco
SK300LC machines are also more durable than ever, able to withstand the
rigors of the toughest job sites. It all adds up to new levels of value that are a
step ahead of the times. Also, this machine conforms to Stage IV Exhaust
Emission Standards, thanks to its signi�cantly reduced NOx* emissions.
While focusing on the global environment of the future, Kobelco o�ers
next-generation productivity to meet the need for lower life cycle costs and
exceed the expectations of customers the world over.
1 2
productivityIncrease in
means“Power”
Higher fuele�ciency
means“E�ciency”
* NOx: Nitrogen Oxide
Power Meets E�ciency
To urban centers, and to mines around the world. Kobelco’s all-out
innovation brings you durable earth-friendly construction machinery that’s
equal to any task, at sites all over the planet. Increased power and even
greater fuel economy bring higher e�ciency to any project. Kobelco
SK300LC machines are also more durable than ever, able to withstand the
rigors of the toughest job sites. It all adds up to new levels of value that are a
step ahead of the times. Also, this machine conforms to Stage IV Exhaust
Emission Standards, thanks to its signi�cantly reduced NOx* emissions.
While focusing on the global environment of the future, Kobelco o�ers
next-generation productivity to meet the need for lower life cycle costs and
exceed the expectations of customers the world over.
Arm Inter�ow SystemWhen lowering the boom, this system uses the downward force generated by the boom’s weight to push �uid to the shovel arm. This greatly reduces the need to apply power from outside the system.
Hydraulic circuit reduces energy lossWe have made every e�ort to enhance fuel e�ciency by minimizing hydraulic pressure resistance, improving the hydraulic line layout to control friction resistance loss and minimizing valve resistance.
Hydraulic System: Revolutionary Technology Saves Fuel
Evolution Continues, with Improved Fuel E�ciency
The boom weight puts force on the boom cylinder
Boom weight
1
2
4
3
Hydraulic �uid pushed from the boom cylinder goes to the arm cylinder
Arm cylinder contracts Arm opens
Improved hydraulic piping is an e�ective means of reducing pressure loss.
Larger hydraulic piping Smoother hydraulic piping Low-resistance connections
In Pursuit of Improved Fuel E�ciency
Engine Meets Stage IV Standards
VG Turbo Reduces PM
The variable-geometry turbocharger adjusts air intake to maximize combustion e�ciency. At low engine speeds the nozzles are closed, the turbo speed increased and air intake is boosted. This helps lower fuel consumption.
EGR Cooler Reduces NOx
Cooled exhaust gases from the EGR coolerare mixed with fresh air in the intake. Therecirculated air lowers the combustiontemperature which reduces NOx.
SCR System with DEF/AdBlueThe engine exhaust system has an SCR system that converts NOx emissions into harmless nitrogen and water. Combining this with a post-exhaust gas treatment system that captures and disposes of PM, the SK300LC has a much cleaner exhaust that meets Stage IV exhaust emission standards.
* SCR: Selective Catalytic Reduction
AIS (Auto Idle Stop)If the boarding/disembarking lever is left up, the engine will stop automatically.This eliminates wasteful idling during standby, saving fuel and reducing CO2 emissions as well.
4 sec
Pull up safety lock lever
Engine stops
Engine deceleration
Alarm
55 sec
60 sec Elapsed time
Variable nozzle
At low-speed At high-speed
Air intake Exhaust
Water-cooled EGR
Elec
tron
ic c
ontr
ol
EGR
valv
e
3 4
The new arm inter�ow system more e�ciently
controls hydraulic �uid �ow, and signi�cant
reduction of in-line resistance and pressure loss
boosts fuel e�ciency.
The engine, already well-known for its
environmental performance has a new SCR* system,
and its reduced NOx emissions means the engine
now meets Stage IV Standards.
1 2 3 4
Engi
ne rp
m
Reduces Fuel Consumption and Minimizes Exhaust EmissionsHino engines are renowned for fuel e�ciency and environmental performance, and Kobelco has tuned these powerplants especially for construction machinery. The pressure within the common rail fuel injection system, the VG turbo, and the exhaust gas after-treatment system reduce exhaust PM*3 while the large-capacity EGR cooler sharply reduces the formation of NOx gases.
*3 PM: Particulate Matter
NEW
NEW
ECO-mode: engineered for economy Kobelco’s ECO-mode maximizes the operating e�ciency of the engine and other components to achieve much greater fuel e�ciency. Just press a button to choose the operation mode best suited to the task at hand and the working conditions.
ECO-mode
Optimal operation with three modes
Ideal balance of productivity and fuel e�ciency for a range of urban engineering projects
S-mode
Minimum fuel consumption for utility projects and other work that demands precision
H-mode Maximum power for maximum productivity on your toughest jobs
Higher fuele�ciency
means“E�ciency”
NOx
SCR catalyst
Arm Inter�ow SystemWhen lowering the boom, this system uses the downward force generated by the boom’s weight to push �uid to the shovel arm. This greatly reduces the need to apply power from outside the system.
Hydraulic circuit reduces energy lossWe have made every e�ort to enhance fuel e�ciency by minimizing hydraulic pressure resistance, improving the hydraulic line layout to control friction resistance loss and minimizing valve resistance.
Hydraulic System: Revolutionary Technology Saves Fuel
Evolution Continues, with Improved Fuel E�ciency
The boom weight puts force on the boom cylinder
Boom weight
1
2
4
3
Hydraulic �uid pushed from the boom cylinder goes to the arm cylinder
Arm cylinder contracts Arm opens
Improved hydraulic piping is an e�ective means of reducing pressure loss.
Larger hydraulic piping Smoother hydraulic piping Low-resistance connections
In Pursuit of Improved Fuel E�ciency
Engine Meets Stage IV Standards
VG Turbo Reduces PM
The variable-geometry turbocharger adjusts air intake to maximize combustion e�ciency. At low engine speeds the nozzles are closed, the turbo speed increased and air intake is boosted. This helps lower fuel consumption.
EGR Cooler Reduces NOx
Cooled exhaust gases from the EGR coolerare mixed with fresh air in the intake. Therecirculated air lowers the combustiontemperature which reduces NOx.
SCR System with DEF/AdBlueThe engine exhaust system has an SCR system that converts NOx emissions into harmless nitrogen and water. Combining this with a post-exhaust gas treatment system that captures and disposes of PM, the SK300LC has a much cleaner exhaust that meets Stage IV exhaust emission standards.
* SCR: Selective Catalytic Reduction
AIS (Auto Idle Stop)If the boarding/disembarking lever is left up, the engine will stop automatically.This eliminates wasteful idling during standby, saving fuel and reducing CO2 emissions as well.
4 sec
Pull up safety lock lever
Engine stops
Engine deceleration
Alarm
55 sec
60 sec Elapsed time
Variable nozzle
At low-speed At high-speed
Air intake Exhaust
Water-cooled EGR
Elec
tron
ic c
ontr
ol
EGR
valv
e
3 4
The new arm inter�ow system more e�ciently
controls hydraulic �uid �ow, and signi�cant
reduction of in-line resistance and pressure loss
boosts fuel e�ciency.
The engine, already well-known for its
environmental performance has a new SCR* system,
and its reduced NOx emissions means the engine
now meets Stage IV Standards.
1 2 3 4
Engi
ne rp
m
Reduces Fuel Consumption and Minimizes Exhaust EmissionsHino engines are renowned for fuel e�ciency and environmental performance, and Kobelco has tuned these powerplants especially for construction machinery. The pressure within the common rail fuel injection system, the VG turbo, and the exhaust gas after-treatment system reduce exhaust PM*3 while the large-capacity EGR cooler sharply reduces the formation of NOx gases.
*3 PM: Particulate Matter
NEW
NEW
ECO-mode: engineered for economy Kobelco’s ECO-mode maximizes the operating e�ciency of the engine and other components to achieve much greater fuel e�ciency. Just press a button to choose the operation mode best suited to the task at hand and the working conditions.
ECO-mode
Optimal operation with three modes
Ideal balance of productivity and fuel e�ciency for a range of urban engineering projects
S-mode
Minimum fuel consumption for utility projects and other work that demands precision
H-mode Maximum power for maximum productivity on your toughest jobs
Higher fuele�ciency
means“E�ciency”
NOx
SCR catalyst
A quick hitch hydraulic line, which speeds up attachment changes, is available as an option.
Piping for Quick Hitch (optional)
A Light Touch on the Lever Means Smoother, Less Tiring Work
2
4
5 6
3
1
More Power and Higher E�ciency
It takes 25%* less e�ort to work the operation lever, which reduces fatigue over long working hours or continued operations.
Multi-Display in ColorBrilliant colors and graphic displays are easy to recognize on the LCD multi-display in the console. The display shows fuel consumption, maintenance intervals, and more.
One-Touch Attachment Mode SwitchA simple �ick of a switch converts the hydraulic circuit and �ow amount to match attachment changes. Icons help the operator to con�rm the proper con�guration at a glance.
MaintenanceFuel consumptionPM accumulation/AdBlue accumulation display
Nibbler modeBreaker mode
Top Class Traveling ForcePowerful traveling force and pulling force deliver plenty of speed when climbing slopes or negotiating bad roads, and the agility to change direction swiftly and smoothly.
Complying with Transport Regulations
1
2
3
4
5
6
Max. digging reach
Max. digging depth
Max. vertical wall digging depth
10,870mm
7,200mm
6,230mm
Top-class excavating reach extends working range
Get More Done Faster with Superior Operability
Operator-friendly Features Include Controls that Are Easy to See, Easy to Use
Max. Arm Crowding Force
Normal: 126kN With Power Boost: 139kN
Max. Bucket Digging Force
Normal: 188kN With Power Boost: 208kN
Max. Engine Power
Drawbar Pulling Force: 280kN
5 6
Values are for HD arm (3.10m)
Values are for HD arm (3.10m)
values are for HD arm(3.10m)
The highly e�cient hydraulic system minimizes fuel consumption while maximizing power. With nimble movement
and ample digging power, this excavator promises to improve your job productivity.
Analog gauge provides an intuitive reading of fuel level and engine water temperature
Green indicator light shows low fuel consumption during operation
PM accumulation display (left)/AdBlue level gauge (right)
Fuel consumption/Switch indicator for rear camera images
Digging mode switch
Monitor display switch
NEW
Power Output (ISO 9249) kW/min-1 Net 188 / 2,100
(ISO 14396) kW/min-1 Net 200 / 2,100
Max.Torque (ISO 9249) N·m/min-1 Net 988 / 1,600
(ISO 14396) N·m/min-1 Net 1017/ 1,600
3,270mm
10,710mm*SK300NLC
3,190mm2,990mm*
*Compared to SK350LC-9
E�cient Performance!Top-Class Powerful Digging
A quick hitch hydraulic line, which speeds up attachment changes, is available as an option.
Piping for Quick Hitch (optional)
A Light Touch on the Lever Means Smoother, Less Tiring Work
2
4
5 6
3
1
More Power and Higher E�ciency
It takes 25%* less e�ort to work the operation lever, which reduces fatigue over long working hours or continued operations.
Multi-Display in ColorBrilliant colors and graphic displays are easy to recognize on the LCD multi-display in the console. The display shows fuel consumption, maintenance intervals, and more.
One-Touch Attachment Mode SwitchA simple �ick of a switch converts the hydraulic circuit and �ow amount to match attachment changes. Icons help the operator to con�rm the proper con�guration at a glance.
MaintenanceFuel consumptionPM accumulation/AdBlue accumulation display
Nibbler modeBreaker mode
Top Class Traveling ForcePowerful traveling force and pulling force deliver plenty of speed when climbing slopes or negotiating bad roads, and the agility to change direction swiftly and smoothly.
Complying with Transport Regulations
1
2
3
4
5
6
Max. digging reach
Max. digging depth
Max. vertical wall digging depth
10,870mm
7,200mm
6,230mm
Top-class excavating reach extends working range
Get More Done Faster with Superior Operability
Operator-friendly Features Include Controls that Are Easy to See, Easy to Use
Max. Arm Crowding Force
Normal: 126kN With Power Boost: 139kN
Max. Bucket Digging Force
Normal: 188kN With Power Boost: 208kN
Max. Engine Power
Drawbar Pulling Force: 280kN
5 6
Values are for HD arm (3.10m)
Values are for HD arm (3.10m)
values are for HD arm(3.10m)
The highly e�cient hydraulic system minimizes fuel consumption while maximizing power. With nimble movement
and ample digging power, this excavator promises to improve your job productivity.
Analog gauge provides an intuitive reading of fuel level and engine water temperature
Green indicator light shows low fuel consumption during operation
PM accumulation display (left)/AdBlue level gauge (right)
Fuel consumption/Switch indicator for rear camera images
Digging mode switch
Monitor display switch
NEW
Power Output (ISO 9249) kW/min-1 Net 188 / 2,100
(ISO 14396) kW/min-1 Net 200 / 2,100
Max.Torque (ISO 9249) N·m/min-1 Net 988 / 1,600
(ISO 14396) N·m/min-1 Net 1017/ 1,600
3,270mm
10,710mm*SK300NLC
3,190mm2,990mm*
*Compared to SK350LC-9
E�cient Performance!Top-Class Powerful Digging
Double-Element Air Cleaner The large-capacity element features a double-�lter structure that keeps the engine running clean even in industrial environments.
Fuel FilterThe pre-�lter, with built-in water separator maximizes �ltering performance.
Structural design increases strength, while
eliminating hydraulic problems. Enhanced
durability takes productivity to a new level.
Improved Filtration System ReliabilityImproved Filtration System ReliabilityImproved Filtration System ReliabilityImproved Filtration System Reliability
NEW
NEW
NEW
Clean, contaminant-free fuel and hydraulic �uid are essential to stable performance. The improved �ltration systems reduce
the risk of mechanical trouble and enhance longevity and durability.
Increased Power,with Enhanced Durabilityto Maintain theMachine's Value
Hydraulic Fluid Filter Clog DetectorPressure sensors at the inlet and outlet of the hydraulic �uid �lter monitor di�erences in pressure to determine the degree of clogging If the di�erence in pressure exceeds a predetermined level, a warning appears on the multi-display, so any contamination can be removed from the �lter before it reaches the hydraulic �uid reservoir.
productivityIncrease in
means“Power”
Larger-size Return
Fuel tank
EngineMain �lter
Pre-�lter
Hydraulic �uid �lter Hydraulic �uid reservoir
Pressuredetection system
Pressuredetection system
7 8
1
Hydraulic Fluid FilterRecognized as the best in the industry, our super-�ne �lter separates out even the smallest particles. New cover prevents contamination when changing �lters.
NEW
Built to Operate in Tough Working Environments
Newly designed boom
Increased boom foot cross section for improve durability against tensile stress
Current New
Redesigned boom o�ers excellent durability during demanding work conditions to reliably
handle work volume.
1
Double-Element Air Cleaner The large-capacity element features a double-�lter structure that keeps the engine running clean even in industrial environments.
Fuel FilterThe pre-�lter, with built-in water separator maximizes �ltering performance.
Structural design increases strength, while
eliminating hydraulic problems. Enhanced
durability takes productivity to a new level.
Improved Filtration System ReliabilityImproved Filtration System ReliabilityImproved Filtration System ReliabilityImproved Filtration System Reliability
NEW
NEW
NEW
Clean, contaminant-free fuel and hydraulic �uid are essential to stable performance. The improved �ltration systems reduce
the risk of mechanical trouble and enhance longevity and durability.
Increased Power,with Enhanced Durabilityto Maintain theMachine's Value
Hydraulic Fluid Filter Clog DetectorPressure sensors at the inlet and outlet of the hydraulic �uid �lter monitor di�erences in pressure to determine the degree of clogging If the di�erence in pressure exceeds a predetermined level, a warning appears on the multi-display, so any contamination can be removed from the �lter before it reaches the hydraulic �uid reservoir.
productivityIncrease in
means“Power”
Larger-size Return
Fuel tank
EngineMain �lter
Pre-�lter
Hydraulic �uid �lter Hydraulic �uid reservoir
Pressuredetection system
Pressuredetection system
7 8
1
Hydraulic Fluid FilterRecognized as the best in the industry, our super-�ne �lter separates out even the smallest particles. New cover prevents contamination when changing �lters.
NEW
Built to Operate in Tough Working Environments
Newly designed boom
Increased boom foot cross section for improve durability against tensile stress
Current New
Redesigned boom o�ers excellent durability during demanding work conditions to reliably
handle work volume.
1
Hammer for emergency exit
TOP Guard is �tted as standard.
Comfortable Cab Is Now Safer than Ever
NEW
Seat recliner can be pushed back �at Double slides allow adjustment for optimum comfort
Automatic AM/FM radio
Spacious storage tray
Seat suspension absorbs vibration
Large cup holder
Comfort
USB pin/24V power outlet
Safety
Expanded Field of View for Greater Safety
Interior Equipment Adds to Comfort and Convenience
More Comfortable Seat Means Higher ProductivitySuper-Airtight CabAir Conditioner Register behind the Seat
Quiet Inside
The high level of air-tightness keeps dust out of the cab.
The high level of air-tightness ensures a quiet, comfortable cabin interior.
The large air-conditioner has registers on the back pillars that blow from behind and to the right and left of the operator’s seat. They can be adjusted to put a direct �ow of cool/warm air on the operator, which means a more comfortable operating environment.
Rear view
Low VibrationCoil springs absorb small vibrations, and high suspension mounts �lled with silicone oil reduce heavy vibration. The long stroke achieved by this system provides excellent protection from vibration.
ROPS CabROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-12117-2: 2008) and ensures greater safety for the operator should the machine tip over.
Broad View Liberates the OperatorThe front window features one large piece of glass without a center pillar on the right side for a wide, unobstructed view.
Right Side Camera Fitted as StandardFurther to the existing rear-view camera, a camera for the right side is �tted as standard for easy safety checks all round the machine.
Rear view shows the area directly behind the cab.
Twice the stroke of a conventional mount
Coil spring
Silicone oil
9 10
A work environment that is quieter and
more comfortable. A cab that puts the
operator �rst is key to improved safety.
Large Cab Is Easy to Get in and out ofThe expanded cab provides plenty of room for a large door, more headroom and smoother entry and exit.
Rear View Camera Right side View Camera
Hammer for emergency exit
TOP Guard is �tted as standard.
Comfortable Cab Is Now Safer than Ever
NEW
Seat recliner can be pushed back �at Double slides allow adjustment for optimum comfort
Automatic AM/FM radio
Spacious storage tray
Seat suspension absorbs vibration
Large cup holder
Comfort
USB pin/24V power outlet
Safety
Expanded Field of View for Greater Safety
Interior Equipment Adds to Comfort and Convenience
More Comfortable Seat Means Higher ProductivitySuper-Airtight CabAir Conditioner Register behind the Seat
Quiet Inside
The high level of air-tightness keeps dust out of the cab.
The high level of air-tightness ensures a quiet, comfortable cabin interior.
The large air-conditioner has registers on the back pillars that blow from behind and to the right and left of the operator’s seat. They can be adjusted to put a direct �ow of cool/warm air on the operator, which means a more comfortable operating environment.
Rear view
Low VibrationCoil springs absorb small vibrations, and high suspension mounts �lled with silicone oil reduce heavy vibration. The long stroke achieved by this system provides excellent protection from vibration.
ROPS CabROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-12117-2: 2008) and ensures greater safety for the operator should the machine tip over.
Broad View Liberates the OperatorThe front window features one large piece of glass without a center pillar on the right side for a wide, unobstructed view.
Right Side Camera Fitted as StandardFurther to the existing rear-view camera, a camera for the right side is �tted as standard for easy safety checks all round the machine.
Rear view shows the area directly behind the cab.
Twice the stroke of a conventional mount
Coil spring
Silicone oil
9 10
A work environment that is quieter and
more comfortable. A cab that puts the
operator �rst is key to improved safety.
Large Cab Is Easy to Get in and out ofThe expanded cab provides plenty of room for a large door, more headroom and smoother entry and exit.
Rear View Camera Right side View Camera
Web server
Hydraulic excavator
KOBELCO service personnel/dealer/customer
Base station Digging Hrs Trveling Hrs Idle Hrs
Opt Att Hrs Cane Mode Hrs Ave,Fuel Consumption
Messages displayed when the
machine returns to the set area.Direct Access to Operational Status
Maintenance Data and Warning Alerts
KOMEXS (Kobelco Monitoring Excavator System) uses satellite communication and internet to relay data, and therefore can be deployed in areas where other forms of communication are di�cult. When a hydraulic excavator is �tted with this system, data on the machine’s operation, such as operating hours, location, fuel consumption, and maintenance status can be obtained remotely.
Remote Monitoring for Peace of Mind
GPS
Customer KOBELCO o�ce KOBELCO service personnel
Security SystemLocation DataAccurate location data can be obtained even from sites where communications are di�cult.
Latest location Location records Work data
Daily report Fuel consumption
Area Alarm It can be set an alarm if the machine is moved out of its designated area to another location.
Engine Start AlarmThe system can be set an alarm if the machine is operated outside designated time.
Engine start alarm outside prescribed work time
Operating Hours• A comparison of operating times of machines at multiple locations shows which locations are busier and more pro�table.• Operating hours on site can be accurately recorded, for running time calculations needed for rental machines, etc.
Machine Maintenance Data• Provides maintenance status of separate machines operating at multiple sites.• Maintenance data is also relayed to KOBELCO service personnel, for more e�cient planning of periodic servicing.
Warning AlertsThis system warns an alert if an anomaly is sensed, preventing damage that could result in machine downtime.
Alarm Information Can Be Received through E-mailAlarm information or maintenance notice can be received through E-mail, using a computer or cell phone.
Daily/Monthly ReportsOperational data downloaded onto a computer helps in formulating daily and monthly reports.
Fuel Consumption DataData on fuel consumption and idling times can be used to indicate improvements in fuel consumption.
Graph of Work ContentThe graph shows how working hours are divided among di�erent operating categories, including digging, idling, traveling and optional operations.
Maintenance
Alarm for outside of reset area
11 12
Work status
Web server
Hydraulic excavator
KOBELCO service personnel/dealer/customer
Base station Digging Hrs Trveling Hrs Idle Hrs
Opt Att Hrs Cane Mode Hrs Ave,Fuel Consumption
Messages displayed when the
machine returns to the set area.Direct Access to Operational Status
Maintenance Data and Warning Alerts
KOMEXS (Kobelco Monitoring Excavator System) uses satellite communication and internet to relay data, and therefore can be deployed in areas where other forms of communication are di�cult. When a hydraulic excavator is �tted with this system, data on the machine’s operation, such as operating hours, location, fuel consumption, and maintenance status can be obtained remotely.
Remote Monitoring for Peace of Mind
GPS
Customer KOBELCO o�ce KOBELCO service personnel
Security SystemLocation DataAccurate location data can be obtained even from sites where communications are di�cult.
Latest location Location records Work data
Daily report Fuel consumption
Area Alarm It can be set an alarm if the machine is moved out of its designated area to another location.
Engine Start AlarmThe system can be set an alarm if the machine is operated outside designated time.
Engine start alarm outside prescribed work time
Operating Hours• A comparison of operating times of machines at multiple locations shows which locations are busier and more pro�table.• Operating hours on site can be accurately recorded, for running time calculations needed for rental machines, etc.
Machine Maintenance Data• Provides maintenance status of separate machines operating at multiple sites.• Maintenance data is also relayed to KOBELCO service personnel, for more e�cient planning of periodic servicing.
Warning AlertsThis system warns an alert if an anomaly is sensed, preventing damage that could result in machine downtime.
Alarm Information Can Be Received through E-mailAlarm information or maintenance notice can be received through E-mail, using a computer or cell phone.
Daily/Monthly ReportsOperational data downloaded onto a computer helps in formulating daily and monthly reports.
Fuel Consumption DataData on fuel consumption and idling times can be used to indicate improvements in fuel consumption.
Graph of Work ContentThe graph shows how working hours are divided among di�erent operating categories, including digging, idling, traveling and optional operations.
Maintenance
Alarm for outside of reset area
11 12
Work status
2
3
E�cient Maintenance Keeps the Machine in Peak Operating Condition
More E�cient Maintenance Inside the Cab
Easy Cleaning
More �nely di�erentiated fuses make it easier to locate malfunctions.
Laid out for easy access to radiator and cooling system elements
Engine oil pan equipped with drain valve.Detachable two-piece �oor mat with handles for easy removal. A �oor drain is located under �oor mat.
Internal and external air conditioner �lters can be easily removed without tools for cleaning.
If the monitor warning goes o�, the �lter should be reactivated manually using a switch.
Displays only the maintenance information that’s needed, when it’s needed
Self-diagnostic function provides early-warning detection and display of electrical system malfunctions
Service-diagnostic function makes it easier to check the status of the machine
Record function of previous breakdowns including irregular and transient malfunction
Machine Information Display Function
1
2
3
Fuel �lter
Pre-�lter
Engine oil �lter
Engine oil panDetachable two-piece �oor matCrawler frame
Air conditioner �lters DPF reactivation switchEasy-access fuse box
Double-element air cleaner
Right sideLeft side
Positioned where the step opens.
Engine oil �lterFuel �lter/Pre-�lter
Examples of displaying maintenance information
Special crawler frame design is easily cleaned of mud.
Highly Durable Super-�ne FilterThe high-capacity hydraulic oil �lter incorporates glass �ber
with superior cleaning power and durability.
Long-Interval MaintenanceLong-life hydraulic oil reduces cost and labor.
Replacement cycle:
1,000 hours
Long-life hydraulic oil:
5,000 hours
DEF/AdBlue tankGenerous space for maintenance work Step/Hand rail
13 14
Easy, On-the-Spot MaintenanceThere is ample space in the engine compartment for a mechanic to do maintenance work inside. The distance between steps is lower so entry and exit is easier. And the mechanic can work in comfort, without contortions or unnatural body positions. Finally, the hood is lighter and easier to raise and lower.
Maintenance Work, Daily Checks, Etc., Can Be Done from Ground LevelThe layout allows for easy access from the ground for many daily checks and regular maintenance tasks.
NEW
1
2
3
E�cient Maintenance Keeps the Machine in Peak Operating Condition
More E�cient Maintenance Inside the Cab
Easy Cleaning
More �nely di�erentiated fuses make it easier to locate malfunctions.
Laid out for easy access to radiator and cooling system elements
Engine oil pan equipped with drain valve.Detachable two-piece �oor mat with handles for easy removal. A �oor drain is located under �oor mat.
Internal and external air conditioner �lters can be easily removed without tools for cleaning.
If the monitor warning goes o�, the �lter should be reactivated manually using a switch.
Displays only the maintenance information that’s needed, when it’s needed
Self-diagnostic function provides early-warning detection and display of electrical system malfunctions
Service-diagnostic function makes it easier to check the status of the machine
Record function of previous breakdowns including irregular and transient malfunction
Machine Information Display Function
1
2
3
Fuel �lter
Pre-�lter
Engine oil �lter
Engine oil panDetachable two-piece �oor matCrawler frame
Air conditioner �lters DPF reactivation switchEasy-access fuse box
Double-element air cleaner
Right sideLeft side
Positioned where the step opens.
Engine oil �lterFuel �lter/Pre-�lter
Examples of displaying maintenance information
Special crawler frame design is easily cleaned of mud.
Highly Durable Super-�ne FilterThe high-capacity hydraulic oil �lter incorporates glass �ber
with superior cleaning power and durability.
Long-Interval MaintenanceLong-life hydraulic oil reduces cost and labor.
Replacement cycle:
1,000 hours
Long-life hydraulic oil:
5,000 hours
DEF/AdBlue tankGenerous space for maintenance work Step/Hand rail
13 14
Easy, On-the-Spot MaintenanceThere is ample space in the engine compartment for a mechanic to do maintenance work inside. The distance between steps is lower so entry and exit is easier. And the mechanic can work in comfort, without contortions or unnatural body positions. Finally, the hood is lighter and easier to raise and lower.
Maintenance Work, Daily Checks, Etc., Can Be Done from Ground LevelThe layout allows for easy access from the ground for many daily checks and regular maintenance tasks.
NEW
1
Speci�cations SK300LC-10 SK300NLC-10
15 16
Unit: m
Digging Force (ISO 6015) Unit: kN
Arm length
Overall lengthOverall height (to top of boom)
Overall width of crawler SK300LC
SK300NLCOverall height (to top of cab)Ground clearance of rear end*Ground clearance*Tail swing radius
AB
C
DEFG
10,7103,2703,1902,9903,2001,200510
3,300
10,8303,500
10,7703,480
Short2.40 m
Long4.00 m
Standard3.10 m
Operating Weight & Ground Pressure
Dimensions
Working Ranges
Unit: mm
Shaped Shoe width mm
Overall width of crawler SK300LC mm
SK300NLC mm
Ground pressure SK300LC kPa
SK300NLC kPa
Operating weight SK300LC kg
SK300NLC kg
In standard trim, with standard boom, 3.10 m arm, and 1.2 m3 ISO heaped bucket.
Boom 6.20 m Arm Short Standard LongRange 2.40 m 3.10 m 4.00 ma- Max. digging reach
b- Max. digging reach at ground level
c- Max. digging depthd- Max. digging heighte- Max. dumping clearancef- Min. dumping clearance
g- Max. vertical wall digging depth
h- Min. swing radius
i- Horizontal digging stroke at ground level
j- Digging depth for 2.4 m (8') �at bottom
Bucket capacity ISO heaped m3
Arm length
Bucket digging forceArm crowding force
G'
H
I
J
KL
Distance from center of swing to rear end
Tumbler distance SK300LC
SK300NLC
Overall length of crawler SK300LC
SK300NLC
Track gauge SK300LC
SK300NLCShoe widthOverall width of upperstructure
3,2704,0004,0004,8704,8702,5902,390600
2,980
*Power Boost engaged
Re�lling Capacities & Lubrications
503L35L28.5L2×7.5L7.4L245L tank oil level410L hydraulic system83L
Fuel tankCooling systemEngine oilTravel reduction gearSwing reduction gear
Hydraulic oil tank
DEF/Urea tank
Boom, Arm & Bucket
140mm×1,305mm150mm×1,675mm130mm×1,208mm
Boom cylindersArm cylinderBucket cylinder
105dB(A) (ISO6395)70dB(A) (ISO6396)
Cab & Control
CabAll-weather, sound-suppressed steel cab mounted on the high suspensionmounts �lled with silicone oil and equipped with a heavy, insulated �oor mat.Control
Noise levels
Two hand levers and two foot pedals for travelTwo hand levers for excavating and swingElectric rotary-type engine throttle
ExternalOperator
Engine
Model J08EVV-KSDPWater-cooled, 4cycle 6cylinder direct injection type diesel engine with intercooler turbo-charger (complies with EU (NRMM) Stage IV, EPA Tier IV Final)6112 mm x 130 mm7.684L188 kW/2,100 min-1 (ISO 9249)200 kW/2,100 min-1 (ISO 14396)988 N . m/1,600 min-1 (ISO 9249)1,017 N . m/1,600 min-1 (ISO 14396)
Type
No. of cylindersBore and strokeDisplacement
Rated power output
Max. torque
Swing System
Axial piston motor
Oil disc brake, hydraulic operated automatically
10.3min-1
98.6kN . m3,300mm4,430mm
Swing motor
Parking brake
Swing speedSwing torqueTail swing radiusMin front swing radius
Travel System
2 x axial-piston, two-step motorsHydraulic brake per motorOil disc brake per motors50 each side5.2/3.1 km/h280KN70% (35deg)
Travel motors Travel brakesParking brakeTravel shoesTravel speed (high/low)Drawbar pulling forceGradeability
6003,1902,990
58 (59)58 (59)
30,400 (31,000)30,300 (30,900)
7003,2903,090
50 (51)50 (51)
30,900 (31,500)30,800 (31,400)
800*3,390
-45 (45)
-31,300 (31,900)
-
900*3,490
-40 (41)
-31,700 (32,300)
-
Hydraulic System
Two variable displacement pumps + one gear pump2 x 245 L/min, 1 x 21 L/min
34.3Mpa37.8Mpa34.3Mpa29.0Mpa5.0MpaGear type8-spoolAir cooled type
Type
Max. discharge �ow
Boom, arm and bucketPower BoostTravel circuitSwing circuitControl circuitPilot control pumpMain control valveOil cooler
Pump
Relief valve setting
188/208*
126/139*188/208*
105/115*188/208*
158/174*
11,720
11,540
8,10010,4307,5301,660
7,080
4,550
7,100
7,970
0.8
10,230
10,030
6,5009,7406,8303,260
5,650
4,400
4,000
6,310
1.4
10,870
10,680
7,20010,0107,1102,560
6,230
4,430
5,580
7,040
1.2
Short2.40 m
Long4.00 m
Standard3.10 m
Recommended Loading only Not recommended
*Without including height of shoe
C
L
D
JK
F
A
B
E
G, G’
I
H
Attachments
Backhoe bucket and combination
Bucket capacity ISO heaped m3
Opening width mm
Bucket weight kg
2.40 m short arm
Combination 3.10 m standard arm
4.00 m long arm
Use Backhoe bucket0.60
800
620
0.80
1,000
720
1.20
1,420
950
1.40
1,400
930
2.40 m Short Arm 4.00 m Long Arm3.10 m Standard Arm
ab
h
e
f
gjc
d
1213m 11 10 9 8 7 6 5 4 3 2 1
1
2
3
4
5
6
7
8
9m
11
12m
10
9
8
7
6
5
4
3
i
Double grouser shoes600
3,1902,990
57 (59)57 (58)
30,300 (30,900)30,200 (30,800)
Triple grouser shoes (even height)
*Only for LC version ( ): Additional weight
Speci�cations SK300LC-10 SK300NLC-10
15 16
Unit: m
Digging Force (ISO 6015) Unit: kN
Arm length
Overall lengthOverall height (to top of boom)
Overall width of crawler SK300LC
SK300NLCOverall height (to top of cab)Ground clearance of rear end*Ground clearance*Tail swing radius
AB
C
DEFG
10,7103,2703,1902,9903,2001,200510
3,300
10,8303,500
10,7703,480
Short2.40 m
Long4.00 m
Standard3.10 m
Operating Weight & Ground Pressure
Dimensions
Working Ranges
Unit: mm
Shaped Shoe width mm
Overall width of crawler SK300LC mm
SK300NLC mm
Ground pressure SK300LC kPa
SK300NLC kPa
Operating weight SK300LC kg
SK300NLC kg
In standard trim, with standard boom, 3.10 m arm, and 1.2 m3 ISO heaped bucket.
Boom 6.20 m Arm Short Standard LongRange 2.40 m 3.10 m 4.00 ma- Max. digging reach
b- Max. digging reach at ground level
c- Max. digging depthd- Max. digging heighte- Max. dumping clearancef- Min. dumping clearance
g- Max. vertical wall digging depth
h- Min. swing radius
i- Horizontal digging stroke at ground level
j- Digging depth for 2.4 m (8') �at bottom
Bucket capacity ISO heaped m3
Arm length
Bucket digging forceArm crowding force
G'
H
I
J
KL
Distance from center of swing to rear end
Tumbler distance SK300LC
SK300NLC
Overall length of crawler SK300LC
SK300NLC
Track gauge SK300LC
SK300NLCShoe widthOverall width of upperstructure
3,2704,0004,0004,8704,8702,5902,390600
2,980
*Power Boost engaged
Re�lling Capacities & Lubrications
503L35L28.5L2×7.5L7.4L245L tank oil level410L hydraulic system83L
Fuel tankCooling systemEngine oilTravel reduction gearSwing reduction gear
Hydraulic oil tank
DEF/Urea tank
Boom, Arm & Bucket
140mm×1,305mm150mm×1,675mm130mm×1,208mm
Boom cylindersArm cylinderBucket cylinder
105dB(A) (ISO6395)70dB(A) (ISO6396)
Cab & Control
CabAll-weather, sound-suppressed steel cab mounted on the high suspensionmounts �lled with silicone oil and equipped with a heavy, insulated �oor mat.Control
Noise levels
Two hand levers and two foot pedals for travelTwo hand levers for excavating and swingElectric rotary-type engine throttle
ExternalOperator
Engine
Model J08EVV-KSDPWater-cooled, 4cycle 6cylinder direct injection type diesel engine with intercooler turbo-charger (complies with EU (NRMM) Stage IV, EPA Tier IV Final)6112 mm x 130 mm7.684L188 kW/2,100 min-1 (ISO 9249)200 kW/2,100 min-1 (ISO 14396)988 N . m/1,600 min-1 (ISO 9249)1,017 N . m/1,600 min-1 (ISO 14396)
Type
No. of cylindersBore and strokeDisplacement
Rated power output
Max. torque
Swing System
Axial piston motor
Oil disc brake, hydraulic operated automatically
10.3min-1
98.6kN . m3,300mm4,430mm
Swing motor
Parking brake
Swing speedSwing torqueTail swing radiusMin front swing radius
Travel System
2 x axial-piston, two-step motorsHydraulic brake per motorOil disc brake per motors50 each side5.2/3.1 km/h280KN70% (35deg)
Travel motors Travel brakesParking brakeTravel shoesTravel speed (high/low)Drawbar pulling forceGradeability
6003,1902,990
58 (59)58 (59)
30,400 (31,000)30,300 (30,900)
7003,2903,090
50 (51)50 (51)
30,900 (31,500)30,800 (31,400)
800*3,390
-45 (45)
-31,300 (31,900)
-
900*3,490
-40 (41)
-31,700 (32,300)
-
Hydraulic System
Two variable displacement pumps + one gear pump2 x 245 L/min, 1 x 21 L/min
34.3Mpa37.8Mpa34.3Mpa29.0Mpa5.0MpaGear type8-spoolAir cooled type
Type
Max. discharge �ow
Boom, arm and bucketPower BoostTravel circuitSwing circuitControl circuitPilot control pumpMain control valveOil cooler
Pump
Relief valve setting
188/208*
126/139*188/208*
105/115*188/208*
158/174*
11,720
11,540
8,10010,4307,5301,660
7,080
4,550
7,100
7,970
0.8
10,230
10,030
6,5009,7406,8303,260
5,650
4,400
4,000
6,310
1.4
10,870
10,680
7,20010,0107,1102,560
6,230
4,430
5,580
7,040
1.2
Short2.40 m
Long4.00 m
Standard3.10 m
Recommended Loading only Not recommended
*Without including height of shoe
C
L
D
JK
F
A
B
E
G, G’
I
H
Attachments
Backhoe bucket and combination
Bucket capacity ISO heaped m3
Opening width mm
Bucket weight kg
2.40 m short arm
Combination 3.10 m standard arm
4.00 m long arm
Use Backhoe bucket0.60
800
620
0.80
1,000
720
1.20
1,420
950
1.40
1,400
930
2.40 m Short Arm 4.00 m Long Arm3.10 m Standard Arm
ab
h
e
f
gjc
d
1213m 11 10 9 8 7 6 5 4 3 2 1
1
2
3
4
5
6
7
8
9m
11
12m
10
9
8
7
6
5
4
3
i
Double grouser shoes600
3,1902,990
57 (59)57 (58)
30,300 (30,900)30,200 (30,800)
Triple grouser shoes (even height)
*Only for LC version ( ): Additional weight
SK300LC-10 SK300NLC-10Lifting Capacities
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in KilogramsBucket: Without bucketRelief valve setting: 37.8 MPa
Notes:
17 18
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Radius
3.0 m 4.5 m 6.0 m 7.5 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
*11,310*20,440
*11,310*20,440
*10,620
*16,450*16,100*14,920*12,190
*10,620
10,64010,68010,87011,280
*7,060*7,370*8,450*9,860
*11,12011,78011,730
*11,240
*7,060*7,370
8,1107,6607,2907,0907,0507,170
*7,270*7,570*8,230
8,6108,4708,460
5,9205,7905,5905,3905,2705,260
*7,330*7,240*7,150
7,1507,0007,2207,920
*9,220*9,480
7,2705,7004,9304,5504,4304,5404,9605,9108,420
6.63 m7.66 m8.28 m8.60 m8.64 m8.41 m7.88 m6.98 m5.53 m
kgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.20 m Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
Radius
3.0 m 4.5 m 6.0 m 7.5 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
*11,310*20,440
*11,31019,330
*10,620
*16,450*16,100*14,920*12,190
*10,620
9,6009,6409,820
10,220
*7,060*7,370*8,450*9,860
*11,12011,75011,710
*11,240
*7,060*7,370
7,4507,0106,6506,4606,4206,530
*7,270*7,570*8,230
8,5908,4508,440
5,4505,3305,1304,9404,8204,810
*7,330*7,240*7,150
7,1406,9907,2007,900
*9,220*9,480
6,7105,2504,5304,1804,0604,1604,5305,4107,680
6.63 m7.66 m8.28 m8.60 m8.64 m8.41 m7.88 m6.98 m5.53 m
kgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.20 m Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.20 m Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*7,090*10,790*15,200
*7,090*10,790*15,200
*16,410
*7,360*10,630*15,010*21,200*17,360
*16,410
*7,360*10,630*15,010
20,950*17,360
*9,960*13,000*14,990*15,850*15,790*14,740*12,070
*9,96011,10010,45010,19010,18010,38010,840
*7,730*9,330
*10,620*11,400
11,340*10,910
*8,400
*7,7307,3406,9406,7206,6706,7907,190
*5,240*5,830*6,680*7,600
8,3008,1408,110
*8,210
*5,240*5,830
5,6105,3205,0804,9304,9105,050
9.0 m
*4,300*5,710*6,150
6,4806,3406,260
*4,3004,3504,2004,0403,9103,840
At Max. Reach
*3,360*3,040*2,900*2,870*2,920*3,070*3,330*3,770*4,520*6,040*8,340
*3,360*3,040*2,900*2,870*2,920*3,070*3,330
3,5804,0104,9107,160
Radius
7.26 m8.49 m9.31 m9.83 m
10.10 m10.13 m
9.93 m9.49 m8.77 m7.68 m6.02 m
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.20 m Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,360
*11,650*18,300*19,360
*12,250*14,890*16,150*16,330*15,630*13,750
11,82011,00010,64010,57010,68010,970
*7,560*9,060
*10,500*11,510
11,660*11,640*10,120
*7,5607,8007,3707,0906,9807,0207,250
*6,370*6,870*7,640*8,450
8,4508,3708,430
6,0505,8705,6405,4105,2405,1705,230
*6,2906,590
*5,690
4,2704,1604,090
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070*4,030
4,0903,9804,0504,3505,0206,540
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.20 m Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,360
*11,650*18,300*19,360
*12,250*14,890*16,150*16,330*15,630*13,750
10,7409,9409,5909,5209,6309,920
*7,560*9,060
*10,500*11,510
11,640*11,640*10,120
*7,5607,1506,7306,4606,3506,3906,610
*6,370*6,870*7,640*8,450
8,4308,3508,420
5,5805,4105,1804,9504,7904,7204,780
*6,2906,570
*5,690
3,9203,8103,740
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070*4,030
3,7503,6403,7003,9704,5805,980
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.02 m Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,360
*11,650*18,300*19,360
*12,250*14,890*15,150*16,330*15,630*13,750
11,33010,51010,15010,08010,19010,480
*7,560*9,060
*10,50011,35011,22011,260
*10,120
*7,5607,4707,0406,7706,6506,6906,920
*6,370*6,870*7,640
8,3108,1208,0408,110
5,8005,6305,3905,1604,9904,9204,980
*6,2906,330
*5,690
4,0703,9603,890
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070*4,030
3,8903,7803,8504,1404,7806,250
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.02 m Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,630
*11,65018,03018,550
*12,250*14,890*16,150*16,330*15,630*13,750
10,2909,4909,1409,0709,1809,470
*7,560*9,060
*10,50011,39011,26011,310
*10,120
7,3106,8406,4206,1506,0406,0806,310
*6,370*6,870*7,640
8,3408,1608,0808,140
5,3505,1804,9504,7204,5504,4804,540
*6,2906,360
*5,690
3,7303,6303,550
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070
3,8503,5703,4603,5203,7804,3605,700
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.20 m Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*7,090*10,790*15,200
*7,090*10,790*15,200
*16,410
*7,360*10,630*15,010*21,200*17,360
*16,410
*7,360*10,630*15,010
18,370*17,360
*9,960*13,000*14,990*15,850*15,790*14,740*12,070
*9,96010,030
9,4009,1509,1509,3409,780
*7,730*9,330
*10,62011,38011,320
*10,910*8,400
7,7206,6906,3006,0906,0406,1506,550
*5,240*5,830*6,680*7,600
8,2808,1208,090
*8,210
*5,2405,4305,1504,8604,6204,4804,4604,590
9.0 m
*4,300*5,710*6,150
6,4706,3206,250
4,0703,9903,8503,6903,5603,490
At Max. Reach
*3,360*3,040*2,900*2,870*2,920*3,070*3,330*3,770*4,520*6,040*8,340
*3,360*3,040*2,900*2,870*2,920
3,0503,0803,2603,6504,4706,520
Radius
7.26 m8.49 m9.31 m9.83 m
10.10 m10.13 m
9.93 m9.49 m8.77 m7.68 m6.02 m
SK300LC-10 SK300NLC-10Lifting Capacities
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in KilogramsBucket: Without bucketRelief valve setting: 37.8 MPa
Notes:
17 18
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Radius
3.0 m 4.5 m 6.0 m 7.5 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
*11,310*20,440
*11,310*20,440
*10,620
*16,450*16,100*14,920*12,190
*10,620
10,64010,68010,87011,280
*7,060*7,370*8,450*9,860
*11,12011,78011,730
*11,240
*7,060*7,370
8,1107,6607,2907,0907,0507,170
*7,270*7,570*8,230
8,6108,4708,460
5,9205,7905,5905,3905,2705,260
*7,330*7,240*7,150
7,1507,0007,2207,920
*9,220*9,480
7,2705,7004,9304,5504,4304,5404,9605,9108,420
6.63 m7.66 m8.28 m8.60 m8.64 m8.41 m7.88 m6.98 m5.53 m
kgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.20 m Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
Radius
3.0 m 4.5 m 6.0 m 7.5 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
*11,310*20,440
*11,31019,330
*10,620
*16,450*16,100*14,920*12,190
*10,620
9,6009,6409,820
10,220
*7,060*7,370*8,450*9,860
*11,12011,75011,710
*11,240
*7,060*7,370
7,4507,0106,6506,4606,4206,530
*7,270*7,570*8,230
8,5908,4508,440
5,4505,3305,1304,9404,8204,810
*7,330*7,240*7,150
7,1406,9907,2007,900
*9,220*9,480
6,7105,2504,5304,1804,0604,1604,5305,4107,680
6.63 m7.66 m8.28 m8.60 m8.64 m8.41 m7.88 m6.98 m5.53 m
kgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.20 m Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.20 m Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*7,090*10,790*15,200
*7,090*10,790*15,200
*16,410
*7,360*10,630*15,010*21,200*17,360
*16,410
*7,360*10,630*15,010
20,950*17,360
*9,960*13,000*14,990*15,850*15,790*14,740*12,070
*9,96011,10010,45010,19010,18010,38010,840
*7,730*9,330
*10,620*11,400
11,340*10,910
*8,400
*7,7307,3406,9406,7206,6706,7907,190
*5,240*5,830*6,680*7,600
8,3008,1408,110
*8,210
*5,240*5,830
5,6105,3205,0804,9304,9105,050
9.0 m
*4,300*5,710*6,150
6,4806,3406,260
*4,3004,3504,2004,0403,9103,840
At Max. Reach
*3,360*3,040*2,900*2,870*2,920*3,070*3,330*3,770*4,520*6,040*8,340
*3,360*3,040*2,900*2,870*2,920*3,070*3,330
3,5804,0104,9107,160
Radius
7.26 m8.49 m9.31 m9.83 m
10.10 m10.13 m
9.93 m9.49 m8.77 m7.68 m6.02 m
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.20 m Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,360
*11,650*18,300*19,360
*12,250*14,890*16,150*16,330*15,630*13,750
11,82011,00010,64010,57010,68010,970
*7,560*9,060
*10,500*11,510
11,660*11,640*10,120
*7,5607,8007,3707,0906,9807,0207,250
*6,370*6,870*7,640*8,450
8,4508,3708,430
6,0505,8705,6405,4105,2405,1705,230
*6,2906,590
*5,690
4,2704,1604,090
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070*4,030
4,0903,9804,0504,3505,0206,540
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.20 m Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,360
*11,650*18,300*19,360
*12,250*14,890*16,150*16,330*15,630*13,750
10,7409,9409,5909,5209,6309,920
*7,560*9,060
*10,500*11,510
11,640*11,640*10,120
*7,5607,1506,7306,4606,3506,3906,610
*6,370*6,870*7,640*8,450
8,4308,3508,420
5,5805,4105,1804,9504,7904,7204,780
*6,2906,570
*5,690
3,9203,8103,740
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070*4,030
3,7503,6403,7003,9704,5805,980
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300LC Boom: 6.02 m Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,360
*11,650*18,300*19,360
*12,250*14,890*15,150*16,330*15,630*13,750
11,33010,51010,15010,08010,19010,480
*7,560*9,060
*10,50011,35011,22011,260
*10,120
*7,5607,4707,0406,7706,6506,6906,920
*6,370*6,870*7,640
8,3108,1208,0408,110
5,8005,6305,3905,1604,9904,9204,980
*6,2906,330
*5,690
4,0703,9603,890
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070*4,030
3,8903,7803,8504,1404,7806,250
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
7.45 m8.37 m8.95 m9.24 m9.28 m9.06 m8.57 m7.76 m6.50 m
kgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.02 m Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift)
*13,610 *13,610*11,650*18,300*19,630
*11,65018,03018,550
*12,250*14,890*16,150*16,330*15,630*13,750
10,2909,4909,1409,0709,1809,470
*7,560*9,060
*10,50011,39011,26011,310
*10,120
7,3106,8406,4206,1506,0406,0806,310
*6,370*6,870*7,640
8,3408,1608,0808,140
5,3505,1804,9504,7204,5504,4804,540
*6,2906,360
*5,690
3,7303,6303,550
*4,280*4,070*4,030*4,120*4,370*4,800*5,550*6,970*8,950
*4,280*4,070
3,8503,5703,4603,5203,7804,3605,700
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 6.20 m Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*7,090*10,790*15,200
*7,090*10,790*15,200
*16,410
*7,360*10,630*15,010*21,200*17,360
*16,410
*7,360*10,630*15,010
18,370*17,360
*9,960*13,000*14,990*15,850*15,790*14,740*12,070
*9,96010,030
9,4009,1509,1509,3409,780
*7,730*9,330
*10,62011,38011,320
*10,910*8,400
7,7206,6906,3006,0906,0406,1506,550
*5,240*5,830*6,680*7,600
8,2808,1208,090
*8,210
*5,2405,4305,1504,8604,6204,4804,4604,590
9.0 m
*4,300*5,710*6,150
6,4706,3206,250
4,0703,9903,8503,6903,5603,490
At Max. Reach
*3,360*3,040*2,900*2,870*2,920*3,070*3,330*3,770*4,520*6,040*8,340
*3,360*3,040*2,900*2,870*2,920
3,0503,0803,2603,6504,4706,520
Radius
7.26 m8.49 m9.31 m9.83 m
10.10 m10.13 m
9.93 m9.49 m8.77 m7.68 m6.02 m
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in Kilograms Bucket: Without bucketRelief valve setting: 37.8 MPa (385 kgf/cm2)
Lifting Capacities
Unit: m
Unit: mm
Digging Force (ISO 6015) Unit: kN
Dimensions
Working Ranges
Boom 3.32 m + 2.98 m Arm Short Standard LongRange 2.4 m 3.1 m 4.0 ma- Max. digging reach
b- Max. digging reach at ground level
c- Max. digging depthd- Max. digging heighte- Max. dumping clearancef- Min. dumping clearance
g- Max. vertical wall digging depth
h- Min. swing radius
i- Horizontal digging stroke at ground level
j- Digging depth for 2.4 m (8') �at bottom
Bucket capacity ISO heaped m3
10.30
10.10
6.2111.228.13
0.985
4.37
3.39
6.15
6.11
1.20
10.95
10.76
6.9011.698.60
0.285
5.00
3.0
7.47
6.80
1.20
11.81
11.63
7.7912.349.25
0.615
5.76
3.12
9.21
7.70
1.20
Arm length Short Standard Long
2.4 m 3.1 m 4.0 m
Bucket digging force
Arm crowding force
*Power Boost engaged
( ): Additional weight
K
A
L
D
F
B
CJ
Notes:
HI
G G’
E
2 Piece Boom Speci�cations
19 20
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
188208*158174*
188208*126139*
188208*105115*
Arm length
Overall lengthOverall height (to top of boom)
Overall width of crawler SK300LC
SK300NLCOverall height (to top of cab)Ground clearance of rear end*Ground clearance*Tail swing radiusDistance from center of swing to rear endTumbler distance Overall length of crawler
Track gauge SK300LC
SK300NLCShoe widthOverall width of upperstructure
AB
C
DEFGG'HI
J
KL
10,8403,270
10,8603,460
10,7803,1003,1902,9903,2001,200510
3,3003,2704,0004,8702,5902,390600
2,980
Short2.4 m
Long4.0 m
Standard3.1 m
*Without including height of shoe
Operating Weight & Ground Pressure
Shaped Double grouser shoes Triple grouser shoes (even height)Shoe width mm
Overall width of crawler SK300LC mm
SK300NLC mm
Ground pressure SK300LC kPa
SK300NLC kPa
Operating weight SK300LC kg
SK300NLC kg
In standard trim, with 2piece boom, 3.1 m arm, and 1.2 m3 ISO heaped bucket.
6003,1902,990
60 (61)59 (61)
31,400 (32,000)31,300 (31,900)
6003,1902,990
59 (60)59 (60)
31,200 (31,800)31,100 (31,700)
7003,2903,090
52 (53)52 (53)
31,800 (32,400)31,700 (32,300)
8003,390
–46 (47)
–32,200 (32,800)
–
9003,490
–41 (42)
–32,600 (33,200)
–
SK300LC-10 SK300NLC-10
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift)
*26,470
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m*26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,03021,56019,65019,300
*10,830*15,690
20,800
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
*12,02010,94010,020
9,6409,590
10,38010,300
*5,810*8,240*8,630*9,510
*10,570*11,390
11,090*10,960*11,630
*8,150
*5,810*8,240
8,2007,7507,2106,7306,4206,9106,6406,710
*4,750*7,790*8,140*8,430*8,140*7,940*7,860*7,240
*4,750*5,640*5,440*5,170
5,0205,0704,8404,790
*4,400*6,320*6,190
6,110
*3,9703,9303,8103,710
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*5,320*6,390*5,280
*5,510*4,500*4,090*3,940
3,6503,5403,6103,8904,510
*5,280
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*27,700 *27,700
*14,850*20,090*25,060*24,270
*17,560
*14,850*20,090
21,66021,070
*17,560
*10,680
*11,240*13,250*14,970*16,030*14,930*13,570*15,900
*10,680
*11,24012,33011,32010,61010,30010,38011,010
*9,150*9,390
*10,190*11,110*11,670*11,570*10,970*10,630
*8,6008,4207,9907,4807,0707,5607,2407,120
*8,440*8,630*8,750*8,510*8,370*8,170
*5,810*5,670
5,6105,5105,2905,160
At Max. Reach
*9,220*7,820*7,290*7,150*6,980*6,840*7,060*7,260*6,500*4,490
*9,220*7,010*5,480*4,730
4,3604,2404,3504,7605,700
*4,490
Radius
5.05 m6.72 m7.73 m8.36 m8.67 m8.71 m8.48 m7.95 m7.07 m5.64 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*26,470 *26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,030*21,760
20,90020,550
*10,830*15,690
22,050
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
*12,02011,58010,66010,28010,23011,02010,940
*5,810*8,240*8,630*9,510
*10,570*11,390*11,620*11,120*11,630
*8,150
*5,810*8,240*8,630
8,1907,6407,1606,8607,3507,070
*4,750*7,790*8,140*8,630*8,540*8,340*8,260*7,240
*4,750*5,960*5,770*5,500*5,240
5,0605,1705,110
9.0 m
*4,400*6,630*6,500*6,420
*4,2304,1904,0703,970
At Max. Reach
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*5,320*6,390*5,280
*5,510*4,500*4,090*4,020*3,890
3,7903,8704,1604,810
*5,280
Radius
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m
Short Arm Standard Arm Long Arm
14 m
13
12
11
10
9
8
7
6
5
4
1
2
3
4
5
6
7
8 m1213 m 11 10 9 8 7 6 5 4 3 2 1
d
c j
e
f
g
ab
h
i
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 10.5 m9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*36,410*17,480*18,570
*36,410*17,480*18,570
*19,720*24,050
*6,600*9,930
*14,380
*17,650
*19,72020,630*6,600*9,930
*14,380
*17,650
*8,420*12,650*14,710*15,520*15,130*13,690*15,610*10,470
*8,42012,07010,82010,110
9,8409,870
10,630*10,470
*6,800*8,360*9,570
*10,630*11,230*11,170*10,340*10,680
*6,800*8,360
7,7707,1606,7206,4906,9906,810
*5,870*6,690*7,330*7,920*8,480*8,220*8,030*7,970*6,510
*5,8706,0805,8305,5005,170
*4,9105,1404,9204,940
9.0 m
*4,730*6,180*6,680*6,410*6,210*6,180
*4,350*4,250*4,090
4,1203,9303,780
At Max. Reach
*5,560*4,140*3,520*3,200*3,040*2,990*3,040*3,250*3,630*4,290*5,270*3,720
*5,560*4,140*3,520*3,200*3,040*2,990*3,040*3,220
3,4103,8404,710
*3,720
Radius
5.52 m7.39 m8.60 m9.41 m9.92 m
10.19 m10.22 m10.03 m
9.59 m8.87 m7.80 m6.17 m
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in Kilograms Bucket: Without bucketRelief valve setting: 37.8 MPa (385 kgf/cm2)
Lifting Capacities
Unit: m
Unit: mm
Digging Force (ISO 6015) Unit: kN
Dimensions
Working Ranges
Boom 3.32 m + 2.98 m Arm Short Standard LongRange 2.4 m 3.1 m 4.0 ma- Max. digging reach
b- Max. digging reach at ground level
c- Max. digging depthd- Max. digging heighte- Max. dumping clearancef- Min. dumping clearance
g- Max. vertical wall digging depth
h- Min. swing radius
i- Horizontal digging stroke at ground level
j- Digging depth for 2.4 m (8') �at bottom
Bucket capacity ISO heaped m3
10.30
10.10
6.2111.228.13
0.985
4.37
3.39
6.15
6.11
1.20
10.95
10.76
6.9011.698.60
0.285
5.00
3.0
7.47
6.80
1.20
11.81
11.63
7.7912.349.25
0.615
5.76
3.12
9.21
7.70
1.20
Arm length Short Standard Long
2.4 m 3.1 m 4.0 m
Bucket digging force
Arm crowding force
*Power Boost engaged
( ): Additional weight
K
A
L
D
F
B
CJ
Notes:
HI
G G’
E
2 Piece Boom Speci�cations
19 20
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
188208*158174*
188208*126139*
188208*105115*
Arm length
Overall lengthOverall height (to top of boom)
Overall width of crawler SK300LC
SK300NLCOverall height (to top of cab)Ground clearance of rear end*Ground clearance*Tail swing radiusDistance from center of swing to rear endTumbler distance Overall length of crawler
Track gauge SK300LC
SK300NLCShoe widthOverall width of upperstructure
AB
C
DEFGG'HI
J
KL
10,8403,270
10,8603,460
10,7803,1003,1902,9903,2001,200510
3,3003,2704,0004,8702,5902,390600
2,980
Short2.4 m
Long4.0 m
Standard3.1 m
*Without including height of shoe
Operating Weight & Ground Pressure
Shaped Double grouser shoes Triple grouser shoes (even height)Shoe width mm
Overall width of crawler SK300LC mm
SK300NLC mm
Ground pressure SK300LC kPa
SK300NLC kPa
Operating weight SK300LC kg
SK300NLC kg
In standard trim, with 2piece boom, 3.1 m arm, and 1.2 m3 ISO heaped bucket.
6003,1902,990
60 (61)59 (61)
31,400 (32,000)31,300 (31,900)
6003,1902,990
59 (60)59 (60)
31,200 (31,800)31,100 (31,700)
7003,2903,090
52 (53)52 (53)
31,800 (32,400)31,700 (32,300)
8003,390
–46 (47)
–32,200 (32,800)
–
9003,490
–41 (42)
–32,600 (33,200)
–
SK300LC-10 SK300NLC-10
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift)
*26,470
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m*26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,03021,56019,65019,300
*10,830*15,690
20,800
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
*12,02010,94010,020
9,6409,590
10,38010,300
*5,810*8,240*8,630*9,510
*10,570*11,390
11,090*10,960*11,630
*8,150
*5,810*8,240
8,2007,7507,2106,7306,4206,9106,6406,710
*4,750*7,790*8,140*8,430*8,140*7,940*7,860*7,240
*4,750*5,640*5,440*5,170
5,0205,0704,8404,790
*4,400*6,320*6,190
6,110
*3,9703,9303,8103,710
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*5,320*6,390*5,280
*5,510*4,500*4,090*3,940
3,6503,5403,6103,8904,510
*5,280
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*27,700 *27,700
*14,850*20,090*25,060*24,270
*17,560
*14,850*20,090
21,66021,070
*17,560
*10,680
*11,240*13,250*14,970*16,030*14,930*13,570*15,900
*10,680
*11,24012,33011,32010,61010,30010,38011,010
*9,150*9,390
*10,190*11,110*11,670*11,570*10,970*10,630
*8,6008,4207,9907,4807,0707,5607,2407,120
*8,440*8,630*8,750*8,510*8,370*8,170
*5,810*5,670
5,6105,5105,2905,160
At Max. Reach
*9,220*7,820*7,290*7,150*6,980*6,840*7,060*7,260*6,500*4,490
*9,220*7,010*5,480*4,730
4,3604,2404,3504,7605,700
*4,490
Radius
5.05 m6.72 m7.73 m8.36 m8.67 m8.71 m8.48 m7.95 m7.07 m5.64 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*26,470 *26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,030*21,760
20,90020,550
*10,830*15,690
22,050
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
*12,02011,58010,66010,28010,23011,02010,940
*5,810*8,240*8,630*9,510
*10,570*11,390*11,620*11,120*11,630
*8,150
*5,810*8,240*8,630
8,1907,6407,1606,8607,3507,070
*4,750*7,790*8,140*8,630*8,540*8,340*8,260*7,240
*4,750*5,960*5,770*5,500*5,240
5,0605,1705,110
9.0 m
*4,400*6,630*6,500*6,420
*4,2304,1904,0703,970
At Max. Reach
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*5,320*6,390*5,280
*5,510*4,500*4,090*4,020*3,890
3,7903,8704,1604,810
*5,280
Radius
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m
Short Arm Standard Arm Long Arm
14 m
13
12
11
10
9
8
7
6
5
4
1
2
3
4
5
6
7
8 m1213 m 11 10 9 8 7 6 5 4 3 2 1
d
c j
e
f
g
ab
h
i
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 10.5 m9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkgkg
SK300LC Boom: 2 piece boom Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*36,410*17,480*18,570
*36,410*17,480*18,570
*19,720*24,050
*6,600*9,930
*14,380
*17,650
*19,72020,630*6,600*9,930
*14,380
*17,650
*8,420*12,650*14,710*15,520*15,130*13,690*15,610*10,470
*8,42012,07010,82010,110
9,8409,870
10,630*10,470
*6,800*8,360*9,570
*10,630*11,230*11,170*10,340*10,680
*6,800*8,360
7,7707,1606,7206,4906,9906,810
*5,870*6,690*7,330*7,920*8,480*8,220*8,030*7,970*6,510
*5,8706,0805,8305,5005,170
*4,9105,1404,9204,940
9.0 m
*4,730*6,180*6,680*6,410*6,210*6,180
*4,350*4,250*4,090
4,1203,9303,780
At Max. Reach
*5,560*4,140*3,520*3,200*3,040*2,990*3,040*3,250*3,630*4,290*5,270*3,720
*5,560*4,140*3,520*3,200*3,040*2,990*3,040*3,220
3,4103,8404,710
*3,720
Radius
5.52 m7.39 m8.60 m9.41 m9.92 m
10.19 m10.22 m10.03 m
9.59 m8.87 m7.80 m6.17 m
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in Kilograms Bucket: Without bucketRelief valve setting: 37.8 MPa (385 kgf/cm2)
Lifting Capacities
Notes:
21 22
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for speci�cs.
STANDARD EQUIPMENT
ENGINE Engine, HINO J08EVV-KSDP, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 120Ah) Starting motor (24V - 5 kW), 60 amp alternator Automatic engine shut-down for low engine oil pressure Engine oil pan drain cock Double element air cleaner Refueling pump
CONTROL Working mode selector (H-mode, S-mode and ECO-mode) Power Boost Heavy lift Object Handling Kit (boom and arm safety valve + hook) Extra N&B piping (proportional hand controlled)
SWING SYSTEM & TRAVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic shift down Sealed & lubricated track links Grease-type track adjusters Automatic swing brake
HYDRAULIC Arm regeneration system Auto warm up system Aluminum hydraulic oil cooler Hydraulic �uid �lter clog detector Hydraulic pressure adjustment function for N&B piping Quick hitch piping
MIRRORS, LIGHTS & CAMERA Rearview mirror Three front working lights Rear & right side camera
CAB & CONTROL Two control levers, pilot-operated Horn, electric Cab light (interior) Luggage tray Large cup holder Detachable two-piece �oor mat Headrest Handrails I Intermittent windshield wiper with double-spray washer Skylight Tinted safety glass Pull-up type front window and removable lower front window Easy-to-read multi-display color monitor Automatic air conditioner Emergency escape hammer Grammer air suspension seat with heater (Optional for N&B piping speci�cation) Radio, AM/FM stereo with speaker USB pin Top guard (ISO10262 : 1998) Remote machine monitoring system “KOMEXS” Tow eyes
Various optional arms Wide range of shoes Additional track guide Two cab lights Extended guard rail Rain visor (may interfere with bucket action)
Cab guard Travel alarm Lower under cover Bigger capacity P4 pump and steel PTO housing Additional weight (600kg)
OPTIONAL EQUIPMENT
SK300LC-10 SK300NLC-10
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*27,700 *27,700
*14,850*20,090*25,060*24,270
*17,560
*14,850*20,090
19,01018,450
*17,560
*10,680
*11,240*13,250*14,970*16,030*14,930*13,570*15,900
*10,680
*11,24011,21010,230
9,5509,2509,3209,870
*9,150*9,390
*10,190*11,110*11,670*11,540*10,970*10,630
*7,8807,7407,3206,8206,4206,9006,540
*8,440*8,630*8,680*8,440*8,300*8,170
5,4105,3605,2205,0104,7904,670
At Max. Reach
*9,220*7,820*7,290*7,150*6,930*6,780*7,000*7,260*6,500*4,490
*9,220*6,410*5,000
4,3003,9703,8603,9604,3305,190
*4,490
Radius
5.05 m6.72 m7.73 m8.36 m8.67 m8.71 m8.48 m7.95 m7.07 m5.64 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*26,470 *26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,03020,09018,29017,970
*10,830*15,690
19,380
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
11,70010,480
9,5909,2209,1709,8909,860
*5,810*8,240*8,630*9,510
*10,570*11,390
11,560*11,120*11,630
*8,150
*5,8108,1607,9407,5106,9706,5006,2106,6506,3806,490
*4,750*7,790*8,140*8,630*8,470*8,270*8,190*7,240
*4,750*5,460*5,260*5,000
5,0204,8904,6704,620
9.0 m
*4,400*6,580*4,810*4,590
3,8703,8003,6903,590
At Max. Reach
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*4,510*5,360*5,280
*5,510*4,500*4,090*3,810
3,5503,4503,5103,780
*4,380*5,280
Radius
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 10.5 m9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*36,410*17,480*18,570
*36,410*17,480*18,570
*19,720*24,050
*6,600*9,930
*14,380
*17,650
*19,72018,030*6,600*9,930
*14,380
*17,650
*8,420*12,650*14,710*15,520*15,130*13,690*15,610*10,470
*8,42010,940
9,7409,0408,7908,8109,5209,710
*6,800*8,360*9,570
*10,630*11,230*11,170*10,340*10,680
*6,8007,7107,0906,5006,0705,8406,3006,120
*5,870*6,690*7,330*7,920
8,440*8,130*7,970*7,950*6,510
*5,6705,5905,3505,0204,700
*4,3804,6504,4304,450
9.0 m
*4,730*6,180*6,550*6,360*6,200*6,130
*3,960*3,860
3,9003,7303,5403,390
At Max. Reach
*5,560*4,140*3,520*3,205*3,040*2,990*3,040*3,250*3,630*4,290*5,270*3,720
*5,560*4,140*3,520*3,205*3,040*2,950
2,8702,9103,0803,4704,270
*3,720
Radius
5.52 m7.39 m8.60 m9.41 m9.92 m
10.19 m10.22 m10.03 m
9.59 m8.87 m7.80 m6.17 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift) 9.0 m At Max. Reach
Radius
*26,470
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m*26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,03018,94017,14016,820
*10,830*15,690
18,230
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
11,0909,8808,9808,6208,5709,3009,260
*5,810*8,240*8,630*9,510
*10,57011,36011,010
*10,870*9,700*8,150
*5,8107,7507,5307,1006,5606,0905,7906,2505,9806,070
*4,750*7,790*8,140*8,360*8,070*7,870*7,790*7,240
*4,750*5,150*4,960*4,690
4,8704,5904,3704,320
*4,400*6,260*6,140*6,060
3,6203,5603,4503,340
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*5,320*6,390*5,280
*5,510*4,500*4,090
3,5903,3103,2103,2603,5204,080
*5,280
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in Kilograms Bucket: Without bucketRelief valve setting: 37.8 MPa (385 kgf/cm2)
Lifting Capacities
Notes:
21 22
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.
2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for speci�cs.
STANDARD EQUIPMENT
ENGINE Engine, HINO J08EVV-KSDP, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 120Ah) Starting motor (24V - 5 kW), 60 amp alternator Automatic engine shut-down for low engine oil pressure Engine oil pan drain cock Double element air cleaner Refueling pump
CONTROL Working mode selector (H-mode, S-mode and ECO-mode) Power Boost Heavy lift Object Handling Kit (boom and arm safety valve + hook) Extra N&B piping (proportional hand controlled)
SWING SYSTEM & TRAVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic shift down Sealed & lubricated track links Grease-type track adjusters Automatic swing brake
HYDRAULIC Arm regeneration system Auto warm up system Aluminum hydraulic oil cooler Hydraulic �uid �lter clog detector Hydraulic pressure adjustment function for N&B piping Quick hitch piping
MIRRORS, LIGHTS & CAMERA Rearview mirror Three front working lights Rear & right side camera
CAB & CONTROL Two control levers, pilot-operated Horn, electric Cab light (interior) Luggage tray Large cup holder Detachable two-piece �oor mat Headrest Handrails I Intermittent windshield wiper with double-spray washer Skylight Tinted safety glass Pull-up type front window and removable lower front window Easy-to-read multi-display color monitor Automatic air conditioner Emergency escape hammer Grammer air suspension seat with heater (Optional for N&B piping speci�cation) Radio, AM/FM stereo with speaker USB pin Top guard (ISO10262 : 1998) Remote machine monitoring system “KOMEXS” Tow eyes
Various optional arms Wide range of shoes Additional track guide Two cab lights Extended guard rail Rain visor (may interfere with bucket action)
Cab guard Travel alarm Lower under cover Bigger capacity P4 pump and steel PTO housing Additional weight (600kg)
OPTIONAL EQUIPMENT
SK300LC-10 SK300NLC-10
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 2.40 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*27,700 *27,700
*14,850*20,090*25,060*24,270
*17,560
*14,850*20,090
19,01018,450
*17,560
*10,680
*11,240*13,250*14,970*16,030*14,930*13,570*15,900
*10,680
*11,24011,21010,230
9,5509,2509,3209,870
*9,150*9,390
*10,190*11,110*11,670*11,540*10,970*10,630
*7,8807,7407,3206,8206,4206,9006,540
*8,440*8,630*8,680*8,440*8,300*8,170
5,4105,3605,2205,0104,7904,670
At Max. Reach
*9,220*7,820*7,290*7,150*6,930*6,780*7,000*7,260*6,500*4,490
*9,220*6,410*5,000
4,3003,9703,8603,9604,3305,190
*4,490
Radius
5.05 m6.72 m7.73 m8.36 m8.67 m8.71 m8.48 m7.95 m7.07 m5.64 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*26,470 *26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,03020,09018,29017,970
*10,830*15,690
19,380
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
11,70010,480
9,5909,2209,1709,8909,860
*5,810*8,240*8,630*9,510
*10,570*11,390
11,560*11,120*11,630
*8,150
*5,8108,1607,9407,5106,9706,5006,2106,6506,3806,490
*4,750*7,790*8,140*8,630*8,470*8,270*8,190*7,240
*4,750*5,460*5,260*5,000
5,0204,8904,6704,620
9.0 m
*4,400*6,580*4,810*4,590
3,8703,8003,6903,590
At Max. Reach
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*4,510*5,360*5,280
*5,510*4,500*4,090*3,810
3,5503,4503,5103,780
*4,380*5,280
Radius
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 10.5 m9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 4.00 m Bucket: without Shoe: 600 mm Additional weight (Heavy Lift)
*36,410*17,480*18,570
*36,410*17,480*18,570
*19,720*24,050
*6,600*9,930
*14,380
*17,650
*19,72018,030*6,600*9,930
*14,380
*17,650
*8,420*12,650*14,710*15,520*15,130*13,690*15,610*10,470
*8,42010,940
9,7409,0408,7908,8109,5209,710
*6,800*8,360*9,570
*10,630*11,230*11,170*10,340*10,680
*6,8007,7107,0906,5006,0705,8406,3006,120
*5,870*6,690*7,330*7,920
8,440*8,130*7,970*7,950*6,510
*5,6705,5905,3505,0204,700
*4,3804,6504,4304,450
9.0 m
*4,730*6,180*6,550*6,360*6,200*6,130
*3,960*3,860
3,9003,7303,5403,390
At Max. Reach
*5,560*4,140*3,520*3,205*3,040*2,990*3,040*3,250*3,630*4,290*5,270*3,720
*5,560*4,140*3,520*3,205*3,040*2,950
2,8702,9103,0803,4704,270
*3,720
Radius
5.52 m7.39 m8.60 m9.41 m9.92 m
10.19 m10.22 m10.03 m
9.59 m8.87 m7.80 m6.17 m
1.5 m 3.0 m 4.5 m 6.0 m 7.5 mA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK300NLC Boom: 2 piece boom Arm: 3.10 m Bucket: without Shoe: 600 mm Standard weight (Heavy Lift) 9.0 m At Max. Reach
Radius
*26,470
6.12 m7.55 m8.46 m9.03 m9.32 m9.36 m9.14 m8.66 m7.86 m6.61 m*26,470
*18,030*21,760*25,200*22,270*10,830*15,690*22,130
*18,03018,94017,14016,820
*10,830*15,690
18,230
*12,020*14,380*15,810*15,770*14,630*16,480*13,680
11,0909,8808,9808,6208,5709,3009,260
*5,810*8,240*8,630*9,510
*10,57011,36011,010
*10,870*9,700*8,150
*5,8107,7507,5307,1006,5606,0905,7906,2505,9806,070
*4,750*7,790*8,140*8,360*8,070*7,870*7,790*7,240
*4,750*5,150*4,960*4,690
4,8704,5904,3704,320
*4,400*6,260*6,140*6,060
3,6203,5603,4503,340
*5,510*4,500*4,090*4,020*4,090*4,290*4,660*5,320*6,390*5,280
*5,510*4,500*4,090
3,5903,3103,2103,2603,5204,080
*5,280
SK300LC-10/SK300NLC-10
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with speci�cations that di�er from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer.Due to our policy of continuous product improvements all designs and speci�cations are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice.
Inquiries To:
September 2018 | POD001
Veluwezoom 151327 AE AlmereThe Netherlandswww.kobelco-europe.com
KOBELCO CONSTRUCTION MACHINERY EUROPE B.V.
0.60 - 1.40 m3
200 kW / 2,100 min-1
Bucket Capacity :
Engine Power :
30,200 - 33,200 kg
Operating Weight :