BTEC IT Unit 02 Lesson 09

Practical Work Briefing – P5, P6, P7

Mr C JohnstonICT Teacher

www.computechedu.co.uk

Session Objectives Understand how to install and configure software to

suit a user, Understand the grading requirements for the

practical work,

Practical Work Tasks Your practical work

Install missing hardware [P5] Configure ROM BIOS [P6] Install and configure an operating system to meet

user needs [P5/6] Select, install and configure security options and

utilities to meet the needs to the user, [P6] Select, install and configure application software to

meet the needs of the user, [P6]

Practical Overview

Install Hardware TESTING

Configure Bios

Install and Configure Operating System

Install and Configure Software

Testing Testing is the process of checking that things works as

we are expecting, For P7 you need to test the configured computer

system for functionality, taking screen shots as appropriate,

In ICT we test by writing a test table first with a range of tests and their expected result… Test Description Expected Outcome Pass /

FailActual Outcome

Corrective Action

Check that MS Word allows text to be entered

On screen showing “The quick brown fox jumps over the lazy dog”

Username and Password works

Time and date correct

OS loads

Scheduled tasks run at required time

Programs installed run

Printer worksPrograms installed

function – save, print, etc

Display settings are

correct

Testing Ideas

BTEC Book – Unit 02 p20-26

Practical Planning Whilst the practical demonstration is taking place you need

to create a project plan / test plan to help you with your work. Use the activity column to makes notes on the different tasks

you will perform and write some tests for each.

Activity

Test Plan

Test Expected Outcome Pass / Fail

Actual Outcome

Corrective Action

Install HDD

Has power Power cable connected to HDD drive

Data cable present IDE Cable attached to drive

Data cable connected properly

Red strip towards power connector (pin 1) on the drive – red strip towards pin 1 on the board

Jumpers set proper Set to master

HDD is secure in the case HDD is inserted properly and doesn’t move

Leave these column blank: they will get

filled in when you do the practical work

Activities Hardware Install Activities

HDD, Optical Disk Drive, RAM, Processor BIOS Config Activities

Date, Time, Drive Configuration, Boot Sequence, Password Operating System Pre-Install Activities

Partition, Format Drive, Regional Options, Languages, Product Key, Admin Password,

Operating System Post-Install Activities User accounts, appearance, organise folders, install printers,

scanners, webcams, security setting (firewall, malware, antivirus) - schedule, setup internet, activate windows, windows updates, install required drivers, customise start menu (do at end)

Task Guidance Ensure you have written your test plan before you start your practical work, Take lots of photos and screen shots to show you have carried out the practical work…

use some within your testing, Ensure your teacher completes the required witness statement, To write up the practical add few lines under each picture to state what you have done

– especially important for M3 where you need to justify the configuration selected.

• For P5, you must install at least one hardware and one software component in a stand-alone system. This is best evidenced with a witness statement or observation record and screenshots. You must use suitable safety equipment/tools and pay due regard to health and safety issues.

• For P6, you must configure some basic system settings, such as left and right mouse buttons, powersaving options, screen resolution, desktop theme, font size, default language setting, default folder locations etc. You may have needed considerable prompting to do so. This is best evidenced with a witness statement or observation record and screenshots.

• To achieve M3, you will need to have configured system and software settings in order to make the system more appropriate for the specified purpose,

• For P7, evidence will be provided by a test plan and subsequent test results. Screenshots may be relevant. Any test failures should be explained, with reasons.

P5 - set up a standalone computer system, installing hardware and software components,

P6 - configure a computer system to meet user needs,P7 - test a configured computer system for functionality.

P5 - set up a standalone computer system, installing hardware and software components,

P6 - configure a computer system to meet user needs,P7 - test a configured computer system for functionality.