BTEC Higher Nationals in Engineering: A Practical Guide ... · practical demonstrations of...
Transcript of BTEC Higher Nationals in Engineering: A Practical Guide ... · practical demonstrations of...
t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g :A P r a c t i c a l G u i d e e n g i n e e r i n g e x c e l l e n c e i n e d u c at i o n
1t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
Since 1958, TecQuipment has been dedicated
to developing products that inspire students at
universities, colleges, schools and training centres in
over 100 countries.
The quality of our teaching equipment is central
throughout our design and production processes.
We manufacture all of our products in our own
factory in the UK under a ‘World Class’ quality system
accredited to ISO9001. We therefore have full control
and confi dence in the quality of our products that
we can deliver to you.
TecQuipment retains the reputation of market leader
in this industry by attention to detail and business
excellence.
Our fi ve-year warranty is reinforced by our
dedicated team of specialists at TecQuipment with
life-time support when you purchase our products.
Our products help students understand key concepts
in many fi elds of engineering and science, including
Aerodynamics, Fluid Mechanics, Thermodynamics,
Materials Testing, plus many more.
TecQuipment’s products include detailed manuals
and instructional material that are specifi cally
designed to aid instructors to provide students with
the facilities to grasp the key concepts covered by
the systems.
Through intuitive design and thorough safety
features, students are able to get hands-on with
complex systems that will spark a passion for
engineering and knowledge of the relevant topics.
I n s p i r i n g o u r f u t u r e e n g i n e e r s
2t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 3 D I S T I N C T I O N : D 2
U n i t 2
E n g i n e e r i n g M at h s
S i m p l e M e c h a n i s m s K i t ( E S 1 4)
Shows how three popular
mechanisms convert motion.
F R E E T O R S I O N A L V I B R AT I O N S ( T M 1 6 5 )
An experimental apparatus
that allows students to
investigate the oscillatory
motion of a disc attached to a
slender rod.
C A M A N A LY S I S M A C H I N E ( T M 1 0 2 1 )
A machine to allow students to
study the dynamic behaviour
of diff erent cams and followers
and their “bounce” speed.
C a m , C r a n k a n d T o g g l e K i t ( E S 1 2 )
Shows the characteristics of
a mechanical toggle, crank
motion and the most popular
shaped cams.
F R E E V I B R AT I O N S O F A C A N T I L E V E R ( T M 1 6 6 )
An experimental apparatus
that allows students to use
fundamental theory and
Rayleigh’s approximation to
calculate the frequency of
oscillation of a cantilever.
F r e e V i b r at i o n s o f a M a s s -S p r i n g s y s t e m ( T M 1 6 4)
Uses simple harmonic
motion theory to show how
to calculate the frequency of
oscillation in simple mass-
spring systems.
F R E E V I B R AT I O N O F A B E A M A N D S P R I N G ( T M 1 6 7 )
An experimental apparatus
that allows students to
investigate the oscillatory
motion of a rigid beam,
pivoted at one end and
suspended by a spring at the
other.
I n t r o d u c t i o nIn setting assignments and working within the structures of the BTEC Higher
Nationals Course 2017 this interactive document provides the course leader
and student with an enhanced reference for the key learning outcomes.
Follow the live links by hovering over the required equipment and discover
the detailed product overview and video demonstrations.
The TecQuipment resource guides you through the essential criteria to
teaching within a stimulating and engaging academic environment. With
practical demonstrations of fundamental engineering principles, students
can analyse data and information, make sense of this and reach evaluative
judgements. This is also supported through both the practical application
and our Versatile Data Acquisition System (VDAS®). Practical demonstrations
provide engaging and stimulating learning, and our products support you
in delivering motivating and inspirational learning that is active, fl exible and
progressive, securing students’ overall learning outcomes.
For easier navigation of this
document, please use the
bookmarks to go to the units
for which we can supply
some relevant teaching
products.
For more information on
any of our equipment listed
here, please click on the
product to go to the relevant
page on our website. Here
you can also download our
datasheets and request a
quotation.
3t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 2 M E R I T: M 2
L e a r n i n g o u t c o m e : L O 2 D I S T I N C T I O N : D 2
L e a r n i n g o u t c o m e : L O 3 PA S S : P 6M E R I T: M 3D I S T I N C T I O N : D 2
S I M P L E A N D C O M P O U N D P E N D U L U M S ( T M 1 6 1 )
An experimental apparatus
that allows students to study
simple harmonic motion
and the factors that aff ect
the period of oscillation of
pendulums.
L e a r n i n g o u t c o m e : L O 2 PA S S : P 3
H E AT T R A N S F E R E X P E R I M E N T s ( T D 1 0 0 2 )
A base unit and four optional
experiments that demonstrate
heat transfer.
H e at E x c h a n g e r E x p e r i m e n t s ( T D 3 6 0 )
A base unit and four optional
experiments that examine and
compare small-scale heat
exchangers to help students
understand how they work.
WAT E R T O A I R H E AT E X C H A N G E R S ( T D 1 0 0 7 )
An experimental unit to show
how cross-fl ow water to air
heat exchangers work.
T O R S I O N T E S T I N G M A C H I N E ( 3 0 N m ) ( S M 1 0 0 1 )
A bench mounted machine to
allow students to do torsion
tests on diff erent materials.
H a r d n e s s T e s t e r s ( S M 1 0 1 5 - 1 7 )
Bench-top industrial-
standard testers for accurate
measurements of Rockwell and
Vickers hardness.
B E N C H T O P T E N S I L E T E S T I N G M A C H I N E ( S M 1 0 0 2 )
A laboratory-scale hand
driven bench top tensile testing
machine, 20kN capacity.
U n i v e r s a l T e s t i n g M a c h i n e ( S M 1 0 0 0 )
A versatile test machine, that
with optional ancillaries, allows
a range of destructive and non
destructive material tests to be
completed.
U n i t 3
E n g i n e e r i n g S c i e n c e
E q u i l i b r i u m o f a b e a m ( S T F 5 )
Demonstrates the forces,
moments and reactions of a
rigid beam.
C o n t i n u o u s a n d I n d e t e r m i n at e B e a m s ( S T R 1 3 )
An experimental apparatus to
allow students to investigate
the properties of statically
indeterminate and continuous
beams.
B e a m A p pa r at u s ( S M 1 0 0 4)
A bench mounted beam
apparatus to allow students to
investigate the defl ections and
reactions in simply supported
and cantilevered beams.
4t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 3 PA S S : P 7
R o tat i o n a l F r i c t i o n K i t ( E S 1 7 )
Demonstrates how rotational
friction aff ects the effi ciency of
popular machine elements.
L e a r n i n g o u t c o m e : L O 1 PA S S : P 2
L e a r n i n g o u t c o m e : L O 2 PA S S : P 5
L e a r n i n g o u t c o m e : L O 3 PA S S : P 8
L e a r n i n g o u t c o m e : L O 1 PA S S : P 3 M E R I T: M 1
L e a r n i n g o u t c o m e : L O 1 PA S S : P 1
L e a r n i n g o u t c o m e : L O 1 D I S T I N C T I O N : D 1
L e a r n i n g o u t c o m e : L O 3 PA S S : P 6
U n i t 8
m e c h a n i c a l p r i n c i p l e s
B e n d i n g M o m e n t s i n a B e a m ( S T R 2 )
A simply supported beam
apparatus to demonstrate
and investigate the bending
moments and forces within a
structure.
T o r s i o n o f c i r c u l a r s e c t i o n s ( S T R 6 )
An experimental apparatus to
allow students to investigate
the relationship between
torque and defl ection in the
elastic region of solid sections
in various materials and a
single tubular section.
G y r o s c o p e ( T M 1 0 0 4)
Demonstrates the relationship
between gyroscopic couple
and the velocities of the rotor
and precession.
S h e a r F o r c e i n a b e a m ( S T R 3 )
A simply supported beam
apparatus to demonstrate and
investigate the shear forces
within a structure by use of
a loaded beam designed to
move in shear only.
B e n d i n g S t r e s s i n a B e a m ( S T R 5 )
An experimental apparatus to
allow students to investigate
the stresses and strains within
a structure in relation to
bending loads.
B e n d i n g S t r e s s i n a B e a m ( S T R 1 3 )
An experimental apparatus to
allow students to investigate
the stresses and strains within
a structure in relation to
bending loads.
G e a r T r a i n s k i t ( E S 1 3 )
Demonstrates the
characteristics of the most
popular gear sets.
B e a m A p pa r at u s ( S M 1 0 0 4)
A bench mounted beam
apparatus to allow students to
investigate the defl ections and
reactions in simply supported
and cantilevered beams.
G e a r e d s y s t e m s ( T M 1 0 1 8 )
An experimental unit to allow
students to fi nd the dynamic
effi ciency of various drive
types. The unit comes complete
with a gear drive unit which
can be confi gured as a simple
or compound drive.
D r i v e S y s t e m s k i t ( E S 1 1 )
Demonstrates the advantages
and disadvantages of three
popular drive systems - belt,
chain and a universal coupling.
5t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 4 D I S T I N C T I O N : D 4
L e a r n i n g o u t c o m e : L O 3 M E R I T: M 3
L e a r n i n g o u t c o m e : L O 4 PA S S : P 9 M E R I T: M 4
P O T E N T I A L A N D K I N E T I C E N E R G Y K I t ( E S 9 )
Shows the diff erence between
potential and kinetic energy
and how it can change from
one to the other.
f r e e a n d F o r c e d V i b r at i o n s ( T M 1 0 1 6 )
Allows students to investigate
the free and forced vibration of
a rigid beam and spring, and
a simply supported beam.
W H I R L I N G O F S H A F T S A N D C R I T I C A L S P E E D ( T M 1 0 0 1 )
A compact bench top
mounting experiment to
demonstrate the phenomena
of whirling shafts.
F r e e V i b r at i o n s o f a M a s s -S p r i n g s y s t e m ( T M 1 6 4)
Uses simple harmonic
motion theory to show how
to calculate the frequency of
oscillation in simple mass-
spring systems.
6t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 3 D I S T I N C T I O N : D 3
L e a r n i n g o u t c o m e : L O 4 D I S T I N C T I O N : D 4
U n i t 9
m at e r i a l s , P r o p e r t i e s a n d T e s t i n g
T O R S I O N T E S T I N G M A C H I N E ( 3 0 N m ) ( S M 1 0 0 1 )
A bench mounted machine to
allow students to do torsion
tests on diff erent materials.
C r e e p T e s t i n g M a c h i n e ( S M 1 0 0 6 )
A bench-mounted machine
that demonstrates the
phenomenon of creep under
diff erent conditions and in
diff erent materials.
C r e e p T e s t i n g M a c h i n e ( S M 1 0 0 6 )
A bench-mounted machine
that demonstrates the
phenomenon of creep under
diff erent conditions and in
diff erent materials.
H a r d n e s s T e s t e r s ( S M 1 0 1 5 - 1 7 )
Bench-top industrial-
standard testers for accurate
measurements of Rockwell and
Vickers hardness.
B E N C H T O P T E N S I L E T E S T I N G M A C H I N E ( S M 1 0 0 2 )
A laboratory-scale hand
driven bench top tensile testing
machine, 20kN capacity.
R o tat i n g Fat i g u e M A C H I N E ( S M 1 0 9 0 )
Demonstrates the failure of
materials when subjected to
an alternating stress.
R o tat i n g Fat i g u e M A C H I N E ( S M 1 0 9 0 )
Demonstrates the failure of
materials when subjected to
an alternating stress.
U n i v e r s a l T e s t i n g M a c h i n e ( S M 1 0 0 0 )
A versatile test machine, that
with optional ancillaries, allows
a range of destructive and non
destructive material tests to be
completed.
7t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 1 PA S S : P 1 , P 2
L e a r n i n g o u t c o m e : L O 3 PA S S : P 5
L e a r n i n g o u t c o m e : L O 3 M E R I T: M 3
L e a r n i n g o u t c o m e : L O 1 M E R I T: M 1
L e a r n i n g o u t c o m e : L O 1 D I S T I N C T I O N : D 1
L e a r n i n g o u t c o m e : L O 2 D I S T I N C T I O N : D 2
U n i t 1 1
F l u i d M e c h a n i c s
C e n t r e o f P r e s s u r e ( H 1 1 )
A pivoted clear plastic
assembly which students use to
fi nd the centre of pressure of a
totally or partially submerged
plane surface. Compact, self-
contained and excellent for
classroom demonstrations.
B E R N O U L L I ’ S T H E O R E M ( H 5 )
An educational Venturi
tube that allows students to
study the Venturi meter and
Bernoulli’s Theorem and to
make direct comparisons
between the results obtained
by experimentation and those
predicted by theory.
F L O W M E A S U R E M E N T M E T H O D S ( H 1 0 )
Investigates diff erent ways of
measuring fl ow including a
Venturi meter, an orifi ce plate
and a rotameter. At the same
time shows applications of the
steady fl ow energy equation
(Bernoulli’s equation).
M O D U L A R A I R - F L O W B E N C H ( A F 1 0 ) + B E R N O U L L I ’ S
E Q U AT I O N ( A F 1 1 )
A fully mobile bench to provide
basic airfl ow facilities to enable
a wide range of practical airfl ow
investigations. Suitable for
demonstration, laboratory and
project work at a basic level.
M O D U L A R A I R - F L O W B E N C H ( A F 1 0 ) + A E R O F O I L W I T H
TA P P I N G S ( A F 1 8 )
A fully mobile bench to provide
basic airfl ow facilities to enable
a wide range of practical airfl ow
investigations. Suitable for
demonstration, laboratory and
project work at a basic level.
P O S I T I V E D I S P L A C E M E N T P U M P M O D U L E ( M F P 1 0 3 )
Allows students to study and
perform tests on a range of
optional Positive Displacement
Pumps to understand how
they work and calculate their
performance.
P R E S S U R E M E A S U R E M E N T B E N C H ( H 3 0 )
A bench-mounting apparatus to
enable practical demonstrations
and investigations into pressure
and vacuum measurement
techniques using manometers
and Bourdon type gauges.
O S B O R N E - R E Y N O L D S A P PA R AT U S ( H 2 1 5 )
A self-contained bench-
mounting apparatus that
uses water to allow students
to investigate laminar and
turbulent fl ow and the
conditions at the transition.
L e a r n i n g o u t c o m e : L O 3 D i s t i n c t i o n : D 3
L e a r n i n g o u t c o m e : L O 4Pa s s : P 7, P 8M e r i t: M 4
C e n t r e o f P r e s s u r e ( H 4 0 8 )
A pivoted clear plastic
assembly which students use to
fi nd the centre of pressure of a
totally or partially submerged
plane surface. Compact, self-
contained and excellent for
classroom demonstrations.
C e n t r e o f P r e s s u r e ( M F P 1 0 1 )
A pivoted clear plastic
assembly which students use to
fi nd the centre of pressure of a
totally or partially submerged
plane surface. Compact, self-
contained and excellent for
classroom demonstrations.
8t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 1 PA S S : P 3
L e a r n i n g o u t c o m e : L O 4 PA S S : P 8 , P 9M e r i t: M 4D i s t i n c t i o n : D 4
L e a r n i n g o u t c o m e : L O 3 Pa s s : P 7D i s t i n c t i o n : D 3
U n i t 1 3
F u n d a m e n ta l s o f T h e r m o d y n a m i c s a n d H e at E n g i n e s
I D E A L G A S E S - B O Y L E ’ S L AW ( T D 1 0 0 0 )
Shows the relationship
between pressure and volume
of an ideal gas at a fi xed
temperature.
S m a l l E n g i n e T e s t S e t ( T D 2 0 0 )
A versatile engine test bed with
instrumentation to provide
the facilities to investigate the
operating characteristics of
single-cylinder and four-stroke
internal combustion engines.
I D E A L G A S E S - G AY- L U S S A C ’ S L AW ( T D 1 0 0 1 )
Demonstrates the relationship
between pressure and
temperatures of a fi xed volume
of ideal gas.
R e g e n e r at i v e E n g i n e T e s t S e t ( T D 3 0 0 )
A versatile engine test
bed with instrumentation
to provide the facilities to
investigate the operating
characteristics of compatible
and interchangeable single-
cylinder internal combustion
E x pa n s i o n o f a P e r f e c t G a s ( T D 1 0 0 4)
Bench-top apparatus to
demonstrate the behaviour
and expansion processes of a
perfect gas.
H e at E x c h a n g e r E x p e r i m e n t s ( T D 3 6 0 )
A base unit and four optional
experiments that examine and
compare small-scale heat
exchangers to help students
understand how they work.
9t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
U n i t 1 5
A u t o m at i o n , R o b o t i c s a n d P r o g r a m m a b l e L o g i c C o n t r o l l e r s ( P L C s )
U n i t 1 6
I n s t r u m e n tat i o n a n d C o n t r o l S y s t e m s
L e a r n i n g o u t c o m e : L O 1 D i s t i n c t i o n : D 1
L e a r n i n g o u t c o m e : L O 1 M e r i t: m 1 , M 2
L e a r n i n g o u t c o m e : L O 1 D i s t i n c t i o n : D 1
L e a r n i n g o u t c o m e : LO2, LO3, LO4 Pa s s : P 5 , P 6 , P 9 M e r i t: M 3 D i s t i n c t i o n : D 2 , D 3
P L C P r o c e s s ( C E 1 1 1 )
Provides a physical
system on which students
can gain experience
in the programming of
programmable logic
controllers (PLCs). The process
is a model of a two-tank
system typical of a chemical
process in which liquids are
measured before being mixed.
The task for the student is to
control liquid level and fl ow.
For use with the PLC Trainer
(CE123).
p r o c e s s c o n t r o l t r a i n i n g s y s t e m s ( T E 3 3 0 0 S e r i e s )
Four separate training systems
for a wide range of practical
experiments in pressure, fl ow,
level and temperature control.
p r o c e s s T r a i n e r ( C E 1 1 7 )
A fully integrated and self-
contained bench top process
control apparatus containing
valves, pumps, power supplies
and ancillaries to allow
fl ow, level, temperature and
pressure control strategies to
be investigated individually
and in combinations.
P L C T r a i n e r ( C E 1 2 3 )
Uses an industry standard
PLC to control the PLC
Process using ladder logic
programming running on a PC.
For use with the PLC Process
(CE111).
T e m p e r at u r e , M e a s u r e m e n t a n d C a l i b r at i o n ( T D 4 0 0 )
Studies the accuracy, linearity
and important characteristics
of popular temperature
measuring devices.
1 0t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 1 PA S S : P 1 , P 2 , P 3 M e r i t: M 1 D i s t i n c t i o n : D 1
L e a r n i n g o u t c o m e : L O 3 PA S S : P 7
L e a r n i n g o u t c o m e : L O 2 PA S S : P 4 , P 6
U n i t 3 0
O p e r at i o n s a n d P l a n t M a n a g e m e n t
I D E A L G A S E S - B O Y L E ’ S L AW ( T D 1 0 0 0 )
Shows the relationship
between pressure and volume
of an ideal gas at a fi xed
temperature.
F r i c t i o n l o s s i n a P i p e ( H 7 )
A bench-mounting apparatus
to allow students to investigate
friction losses in a small-bore
horizontal pipe under laminar
and turbulent fl ow conditions.
D r i v e S y s t e m s K i t ( E S 1 1 )
Demonstrates the advantages
and disadvantages of three
popular drive systems - belt,
chain and a universal coupling.
I D E A L G A S E S - G AY- L U S S A C ’ S L AW ( T D 1 0 0 1 )
Demonstrates the relationship
between pressure and
temperatures of a fi xed volume
of ideal gas.
P i p e w o r k E n e r g y L o s s e s ( H 3 4)
A simple single pipeline
apparatus to demonstrate
energy losses around typical
bends and fi ttings.
G e a r T r a i n s K i t ( E S 1 3 )
Demonstrates the
characteristics of the most
popular gear sets.
E x pa n s i o n o f a P e r f e c t G a s ( T D 1 0 0 4)
Bench-top apparatus to
demonstrate the behaviour
and expansion processes of a
perfect gas.
L o s s e s i n P i p i n g S y s t e m s ( H 1 6 )
An apparatus to allow students
to investigate the friction losses
in piping systems. The large
open format of the apparatus
makes it ideal for students
working in small or large
groups.
F l u i d F r i c t i o n A p pa r at u s ( H 4 0 8 )
A fl oor standing apparatus to
allow students to investigate
the phenomena of laminar,
transitional and turbulent fl ows
in pipe systems.
1 1t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 3 M e r i t: M 3
L e a r n i n g o u t c o m e : L O 3 D i s t i n c t i o n : D 3
F r i c t i o n l o s s i n a P i p e ( H 7 )
A bench-mounting apparatus
to allow students to investigate
friction losses in a small-bore
horizontal pipe under laminar
and turbulent fl ow conditions.
O S B O R N E - R E Y N O L D S A P PA R AT U S ( H 2 1 5 )
A self-contained bench-
mounting apparatus that
uses water to allow students
to investigate laminar and
turbulent fl ow and the
conditions at the transition.
F l o w M e t e r C a l i b r at i o n ( H 4 0 )
A compact unit that compares
and shows the accuracy, losses
and use of fundamental fl ow
meters. Includes a nozzle fl ow
meter as standard.
P R E S S U R E M E A S U R E M E N T B E N C H ( H 3 0 )
A bench-mounting apparatus to
enable practical demonstrations
and investigations into pressure
and vacuum measurement
techniques using manometers
and Bourdon type gauges.
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 1 1D i s t i n c t i o n : D 4
H e at E x c h a n g e r E x p e r i m e n t s ( T D 3 6 0 )
A base unit and four optional
experiments that examine and
compare small-scale heat
exchangers to help students
understand how they work.
L e a r n i n g o u t c o m e : L O 1 D i s t i n c t i o n : D 1
U n i t 3 1
E l e c t r i c a l S y s t e m s a n d Fa u lt F i n d i n g
D i s t r i b u t i o n T r a i n e r ( P S L4 0 )
Shows how electricity is
distributed and protected.
Investigates distribution
through transformers, radial
and ring-main circuits,
effi ciency and regulation.
1 2t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 1 D i s t i n c t i o n : D 1
L e a r n i n g o u t c o m e : L O 2 Pa s s : P 5
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 9 D i s t i n c t i o n : D 4
L e a r n i n g o u t c o m e : L O 3 Pa s s : P 6
L e a r n i n g o u t c o m e : L O 2 M e r i t: M 2 D i s t i n c t i o n : D 2
L e a r n i n g o u t c o m e : L O 2 Pa s s : P 4
U n i t 3 6
A d va n c e d M e c h a n i c a l P r i n c i p l e s
U N S Y M M E T R I C A L B E N D I N G A N D S H E A R C E N T R E ( S T R 7 )
An experimental apparatus to
allow students to investigate
defl ection and stability within a
structure in relation to beams
with unsymmetrical sections.
T h i n C y l i n d e r ( S M 1 0 0 7 )
A bench mounting apparatus
to allow the stresses and
strains of a pressurised
thin walled cylinder to be
investigated and analysed.
B e n d i n g S t r e s s i n a B e a m ( S T R 5 )
An experimental apparatus to
allow students to investigate
the stresses and strains within
a structure in relation to
bending loads.
P i n J o i n t e d F r a m e w o r k s ( S T R 8 )
An experimental apparatus
to allow students to create
a wide selection of pin-
jointed frameworks and then
investigate the eff ects resulting
from applying loading forces
to them.
T h i c k C y l i n d e r ( S M 1 0 1 1 )
A self-contained bench
mounting experimental
apparatus to enable students
to investigate the distribution of
radial and hoop stresses and
strains throughout the wall of a
thick cylinder and to compare
the practical results with those
predicted by theory.
S t r u c t u r e s S o f t wa r e ( S T R S )
A single seat virtual
experimentation pack to allow
computer based simulations
of all of the experiments in
TecQuipment’s Structures
Range. For use with a stand-
alone PC.
B e n d i n g S t r e s s i n a B e a m ( S T R 1 3 )
An experimental apparatus to
allow students to investigate
the stresses and strains within
a structure in relation to
bending loads.
B e n d i n g S t r e s s i n a B e a m ( S T R 1 3 )
An experimental apparatus to
allow students to investigate
the stresses and strains within
a structure in relation to
bending loads.
D r i v e S y s t e m s K i t ( E S 1 1 )
Demonstrates the advantages
and disadvantages of three
popular drive systems - belt,
chain and a universal coupling.
C a m , C r a n k a n d T o g g l e K i t ( E S 1 2 )
Shows the characteristics of
a mechanical toggle, crank
motion and the most popular
shaped cams.
C A M A N A LY S I S M A C H I N E ( T M 1 0 2 1 )
A machine to allow students to
study the dynamic behaviour
of diff erent cams and followers
and their “bounce” speed.
1 3t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 1 1
L e a r n i n g o u t c o m e : L O 2 Pa s s : P 3 , p 5 M e r i t: M 3 D i s t i n c t i o n : D 2
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 8 , p 9 M e r i t: M 5 D i s t i n c t i o n : D 4
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 1 0
L e a r n i n g o u t c o m e : L O 1 M e r i t: M 2
L e a r n i n g o u t c o m e : L O 3 D i s t i n c t i o n : D 3
G o v e r n o r s ( T m 1 0 2 7 )
Three interchangeable
governors (Hartnell, Porter
and Proell) show the eff ects of
speed, mass and geometry on
governor behaviour.
R e f r i g e r at i o n C y c l e ( E C 1 5 0 0 )
Bench-top unit that allows
students to investigate the
stages of refrigeration.
S u p e r H e at e d S t e a m P l a n t P e r f o r m a n c e ( T D 1 0 5 0 )
A laboratory-scale steam
plant that shows fundamental
thermodynamic principles
of energy conversion,
and mechanical power
measurement.
B a l a n c e o f R e c i p r o c at i n g m a s s e s ( T M 1 0 2 2 )
A model four cylinder engine
that shows the primary
and secondary forces and
moments when balancing
reciprocating masses.
R e c i p r o c at i n g C o m p r e s s o r M o d u l e ( M F P 1 0 4)
Allows students to study
and perform tests on a
reciprocating compressor: to
understand how it works and
calculate its performance.
T u r b o j e t T r a i n e r ( G T 1 0 0 )
A self-contained single-shaft
gas turbine thrust jet that uses
kerosene as the working fuel.
S tat i c a n d D y n a m i c B a l a n c i n g ( T M 1 0 0 2 )
For experiments in balancing a
rotating mass system, statically
and dynamically.
C e n t r i f u g a l C o m p r e s s o r M o d u l e ( M F P 1 0 5 )
Allows students to study and
perform tests on a centrifugal
compressor (blower) to
understand how it works and
calculate its performance.
T u r b o j e t T r a i n e r w i t h R e h e at ( G T 1 0 0 R S )
Based on the Turbo Jet
(GT100) this product has a
reheat (afterburner) section
for in-depth examination of a
working gas turbine.
U n i t 3 8
F u r t h e r T h e r m o d y n a m i c s
1 4t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 1 , L O 2 Pa s s : P 2 , P 4
U n i t 4 1
D i s t r i b u t e d C o n t r o l S y s t e m s
U n i t 4 2
F u r t h e r P r o g r a m m a b l e L o g i c C o n t r o l l e r s ( P L C s )
p r o c e s s c o n t r o l t r a i n i n g s y s t e m s ( T E 3 3 0 0 S e r i e s )
Four separate training systems
for a wide range of practical
experiments in pressure, fl ow,
level and temperature control.
L e a r n i n g o u t c o m e : L O 1 Pa s s : P 1 M e r i t: M 1
P L C P r o c e s s ( C E 1 1 1 )
Provides a physical
system on which students
can gain experience
in the programming of
programmable logic
controllers (PLCs). The process
is a model of a two-tank
system typical of a chemical
process in which liquids are
measured before being mixed.
The task for the student is to
control liquid level and fl ow.
For use with the PLC Trainer
(CE123).
P L C T r a i n e r ( C E 1 2 3 )
Uses an industry standard
PLC to control the PLC
Process using ladder logic
programming running on a PC.
For use with the PLC Process
(CE111).
L e a r n i n g o u t c o m e : L O 2 Pa s s : P 2
U n i t 5 3
U t i l i s at i o n o f E l e c t r i c a l P o w e r
P o w e r S y s t e m T r a i n e r ( P S S 1 )
A self-contained Power System
Trainer that allows engineers,
technicians and control room
operatives to gain knowledge-
based learning and skills-
based training in all aspects of
electrical power systems.
S e c o n d G e n e r at o r f o r P S S 1 ( P S S 3 )
A self-contained console
comprising a motor/ generator
machine set, instrumentation
and protection. Nominally
rated at 2 kVA to operate as a
second generator with the PSS1
Power System Trainer.
1 5t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 3 Pa s s : P 5 , P 6 , P 9 D i s t i n c t i o n : D 3
U n i t 5 4
F u r t h e r C o n t r o l E n g i n e e r i n g S y s t e m s
T h e r m a l C o n t r o l P r o c e s s A p pa r at u s ( C E 1 0 3 )
A compact self-contained
bench mounting temperature
control apparatus designed to
allow students at all academic
levels to investigate the basic
and advanced principles of
control.
C o u p l e d Ta n k s A p pa r at u s ( C E 1 0 8 )
A compact, bench-mounting
apparatus designed to allow
students at all academic
levels to investigate basic and
advanced principles of control
including control of multi-
variable systems.
B a l l a n d P l at e A p pa r at u s ( C E 1 5 1 )
A two-dimensional bench
mounting system to allow
controller design and real-time
control from within a MATLAB/
Simulink environment. Requires
MATLAB and Simulink and
other MathWorks products.
B a l l a n d B e a m A p pa r at u s ( C E 1 0 6 )
A compact self-contained
bench mounting apparatus
designed to allow students
at all academic levels
to investigate basic and
advanced principles of control
including control of naturally
unstable systems.
S e r v o T r a i n e r ( C E 1 1 0 )
A compact self-contained
bench mounting d.c. servo
apparatus designed to allow
students at all academic
levels to investigate basic and
advanced principles of control.
In particular the CE110 deals
with control issues relating to
position and speed control in
servo systems.
C o u p l e d Ta n k s A p pa r at u s ( C E 1 0 5 )
A self-contained, bench-
mounting apparatus designed
to allow students at all
academic levels to investigate
basic and advanced principles
of open and closed-loop
control of fl ow rate and liquid
level in single and dual tank
systems.
B a l l a n d H o o p A p pa r at u s ( C E 1 0 9 )
A compact self-contained
bench mounting apparatus
designed to allow students
at all academic levels
to investigate basic and
advanced principles of control
including systems that are
naturally oscillatory.
M a g n e t i c L e v i tat i o n M o d e l ( C E 1 5 2 )
A compact one dimensional
strongly non-linear unstable
magnetic levitation system to
be controlled from within a
MATLAB/Simulink environment.
E n g i n e S p e e d C o n t r o l A p pa r at u s ( C E 1 0 7 )
A compact self-contained
bench mounting apparatus
designed to allow students
at all academic levels
to investigate basic and
advanced principles of control
including control of non-
linear systems and inner-loop
feedback techniques.
H e l i c o p t e r M o d e l ( C E 1 5 0 )
A multi-dimensional naturally
unstable model helicopter
system with three manipulated
inputs and two measured
outputs to be controlled from
within a MATLAB/Simulink
environment.
1 6t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 7, P 8 M e r i t: M 5 D i s t i n c t i o n : D 4
L e a r n i n g o u t c o m e : L O 1 D i s t i n c t i o n : D 1
p r o c e s s c o n t r o l t r a i n i n g s y s t e m s ( T E 3 3 0 0 S e r i e s )
Four separate training systems
for a wide range of practical
experiments in pressure, fl ow,
level and temperature control.
p r o c e s s T r a i n e r ( C E 1 1 7 )
A fully integrated and self-
contained bench top process
control apparatus containing
valves, pumps, power supplies
and ancillaries to allow
fl ow, level, temperature and
pressure control strategies to
be investigated individually
and in combinations.
A i r C o n d i t i o n i n g T r a i n e r ( E C 1 5 0 1 )
Bench-top trainer, allows
students to investigate the
fundamental principles of air
conditioning.
U n i t 6 2
H e at i n g , V e n t i l at i o n a n d A i r C o n d i t i o n i n g ( H VA C )
1 7t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 2 Pa s s : P 4 , P 6
U n i t 6 3
I n d u s t r i a l S e r v i c e s
R e c i p r o c at i n g C o m p r e s s o r M o d u l e ( M F P 1 0 4)
Allows students to study
and perform tests on a
reciprocating compressor: to
understand how it works and
calculate its performance.
C e n t r i f u g a l C o m p r e s s o r M o d u l e ( M F P 1 0 5 )
Allows students to study and
perform tests on a centrifugal
compressor (blower) to
understand how it works and
calculate its performance.
1 8t e c q u i p m e n t. c o m i n f o @ t e c q u i p m e n t. c o m
B T E C H i g h e r N at i o n a l s i n E n g i n e e r i n g : A P r a c t i c a l G u i d e T e c Q u i p m e n t Lt d
L e a r n i n g o u t c o m e : L O 1 M e r i t: M 1
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 9
L e a r n i n g o u t c o m e : L O 4 Pa s s : P 1 0
U n i t 6 4
T h e r m o F l u i d s
I D E A L G A S E S - B O Y L E ’ S L AW ( T D 1 0 0 0 )
Shows the relationship
between pressure and volume
of an ideal gas at a fi xed
temperature.
I D E A L G A S E S - G AY- L U S S A C ’ S L AW ( T D 1 0 0 1 )
Demonstrates the relationship
between pressure and
temperatures of a fi xed volume
of ideal gas.
E x pa n s i o n o f a P e r f e c t G a s ( T D 1 0 0 4)
Bench-top apparatus to
demonstrate the behaviour
and expansion processes of a
perfect gas.
L e a r n i n g o u t c o m e : L O 2 M e r i t: M 2
S u p e r H e at e d S t e a m P l a n t P e r f o r m a n c e ( T D 1 0 5 0 )
A laboratory-scale steam
plant that shows fundamental
thermodynamic principles
of energy conversion,
and mechanical power
measurement.
L o s s e s i n P i p i n g S y s t e m s ( H 1 6 )
An apparatus to allow students
to investigate the friction losses
in piping systems. The large
open format of the apparatus
makes it ideal for students
working in small or large
groups.
M o d u l a r F l u i d P o w e r R a n g e ( M F P )
A range seven fl uid power
modules (MFP101–MFP107)
comprising pumps, fans and
compressors.
F l u i d F r i c t i o n A p pa r at u s ( H 4 0 8 )
A fl oor standing apparatus to
allow students to investigate
the phenomena of laminar,
transitional and turbulent fl ows
in pipe systems.
TecQuipment Ltd
Bonsall Street
Long Eaton
Nottingham NG10 2AN
0115 972 2611