BSC PreventiveMantenance Update Jan2012

Document number:

VN-RP-ENG-2004-011

Title: BSC&XCDR Preventive Maintenance Service Record Revision:

Release Date:

V02

07-Jan-2004

BSC_PreventiveMantenance_update_Jan2012.doc Page 1 / 17

BSC Hardware

Preventive Maintenance

Service Record

SITE NAME

REGION

CABINET

CONFIGURATION

Motorola Engineer

Motorola Signature

VNP Engineer

VNP Signature

DATE

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


A. BSS System Health Check

1. Cabinet view

2. General Configuration Cage Connection Type: Expansion Extension

Clock Synchronization Status: Phase locked Free run

GPRS Service: Available Unavailable

External Alarm System: Available Unavailable

Non Volatile Memory (NVM) Available Unavailable

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


3. Configuration and Link Diagram i. Hardware Configuration

Items Total Items Total

CAB GCLK

CAGE BSP GPROC

MSI CSFP GPROC

GDP OMF GPROC

XCDR LCF GPROC

KSW Pool GPROC

ii. Connection Configuration Connected to MSC:

Connected to RXCDR: The number of sites:

MMS

Port

Connected To

Network Entity

At Port Carried

MMS 0 0 TRAU_XXXM MMS 6 0 MTL-x, OML-x, XBL-x, OPL-x,, CIC:xxx-yyy,

MMS 0 1 BTS_N:XXX-YYY MMS 0 0 RSL-x, RTF channel

MMS 1 0

MMS 1 1

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


4. Event and alarm summary

5. Comments/Remarks

Any device with active alarms? Any device with repeated alarms? BSS software code object list in NVM and BSP are identical? Any redundancy lack: BSP, Pool GPROC?

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


B. Hardware Checking

1. BSSC CABINET CHECK

D.C Voltage Tests D.C. Power Supply Tests for cabinets (Requirement DC input 53.65 to 55.40 Volts)

DC input to First cabinet DC input to Second cabinet DC input to Third cabinet

Volts

Volts Volts

Digital Shelf IPSM Insert dummy load card into slot 18 and test each IPSM with only one IPSM powered up at a time. Record results.

Upper shelf in the first cabinet

Voltage IPSM 0 IPSM 1 IPSM 2 Limits

+ 12 volts +/- 600mvdc

- 12 volts +/- 600mvdc


Lower shelf in the first cabinet





Upper shelf in the second cabinet





Lower shelf in the second cabinet





Comment and Action Done:

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


2. CIRCUIT BREAKER ALARM TEST

Circuit breaker CB 0 CB 1 CB 2 CB 3 CB 4 CB 5 CB 6 CB 7 CB 8 CB 9

First Cabinet

Second Cabinet

Third Cabinet

Switch off each circuit breaker in turn and check alarms register on laptop indicate Pass or Fail in box.


3. EAS (FIX) ALARMS TESTS Purpose: 1. External alarm was installed and connected to this BSC? 2. Verify the functionality of all external alarms, which have been defined by Motorola on site. 3. Ensure the alarms are being reported to the OMCR 4. Motorola will only check those EAS alarms installed by Motorola.

Alarms E.A.S.

Optocoupler 1

Optocoupler 2

Optocoupler 3

Optocoupler 4

Optocoupler 5

Optocoupler 6

Optocoupler 7

Optocoupler 8


Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


4. SITE CHECK

Tasks Status

Check the distribution frame (DDF) wiring description table available and attached to DDF frame?

Check all MMS ports at DDF frame are labeled?

Check all BIB and power connections are securely fastened.

Perform air filter cleaning

Perform GCLK calibration

SLOT SERIAL

NUMBER OF GCLK BOARD

DATE

DATE OF LAST

CALIBRATION

FREQUENCY BEFORE

CALIBRATION


Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


5. CABLING/WIRING/MISC CHECK

Tasks Status

Having any cabling within the cabinets for loose/bad connections, signs of wear or rodent damage?

Having any ground wire connections at rack for tightness and signs of corrosion?

Having any check of DC power connections at rack for tightness and signs of corrosion?

Having any missing/loose screws on equipment racks?

Current BSC/RXCDR configuration matches with database configuration?

Having labeling for all Cabinets, DC cables, grounding cables, BIB cables, Alarm cable and Battery cables? Labeling cables at 2 ends and clearly?

Having label for DC circuit breaker to single cabinets?

All labels have the rule and follow with VNP or Motorola standard?


Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


6. EXTERIOR GROUND SYSTEM CHECK 1. If applicable, clean debris from inspection holes. Report broken or missing inspection hole covers. 2. Inspect the following grounding connections and notify customer of any action required. (Not tightness or signs of corrosion)


7. AIR CONDITIONING CHECK

Using digital thermometer to measure equipment room temperature, it should be not excessive 26 degree Celsius.


8. BATTERY SYSTEM CHECK Using Battery tester makes sure all cells of battery system having good inter-cell resistance and cell impedance as well. Note down any issue with battery system?


9. PICTURES

1. Equipment Room 2. BSSC cabinets and cages 3. Any installation abnormal

For the purpose of recording and filling, these pictures are printed and attached to section D

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


10. UPDATE INVENTORY OF BSC/RXCDR CABINET CAGE 0

CARDS BOARD POSITION PART NUMBER SERIAL NUMBER

CAGE

BTC SLOT 0

KSW SLOT 1

GCLK SLOT 2

GCLK SLOT 4

MSI/GDP SLOT 6

MSI/GDP SLOT 7

MSI/GDP SLOT 8

MSI/GDP SLOT 9

MSI/GDP SLOT 10

MSI/GDP SLOT 11

MSI/GDP SLOT 12

MSI/GDP SLOT 13

MSI/GDP SLOT 14

MSI/GDP SLOT 15

MSI/GDP SLOT 16

MSI/GDP SLOT 17

GPROC-2/GDP SLOT 18

GPROC-2/GDP SLOT 19

GPROC-2/GDP SLOT 20

GPROC-2/GDP SLOT 21

GPROC-2/GDP SLOT 22

GPROC-2/GDP SLOT 23

GPROC-2 SLOT 24

GPROC-2 SLOT 25

GPROC-2/NVRAM SLOT 26

KSW SLOT 27

BTC SLOT 28

IPSM SLOT 0

IPSM SLOT 1

IPSM SLOT 2

CAGE 1


CAGE

BTC SLOT 0

KSW SLOT 1

GCLK SLOT 2

GCLK SLOT 4

MSI/GDP SLOT 6

MSI/GDP SLOT 7

MSI/GDP SLOT 8

MSI/GDP SLOT 9

MSI/GDP SLOT 10

MSI/GDP SLOT 11

MSI/GDP SLOT 12

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


MSI/GDP SLOT 13

MSI/GDP SLOT 14

MSI/GDP SLOT 15

MSI/GDP SLOT 16

MSI/GDP SLOT 17

GPROC-2/GDP SLOT 18

GPROC-2/GDP SLOT 19

GPROC-2/GDP SLOT 20

GPROC-2/GDP SLOT 21

GPROC-2/GDP SLOT 22

GPROC-2/GDP SLOT 23

GPROC-2 SLOT 24

GPROC-2 SLOT 25


KSW SLOT 27

BTC SLOT 28

IPSM SLOT 0

IPSM SLOT 1

IPSM SLOT 2

CAGE 2


CAGE

BTC SLOT 0

KSW SLOT 1

GCLK SLOT 2

GCLK SLOT 4

MSI/GDP SLOT 6

MSI/GDP SLOT 7

MSI/GDP SLOT 8

MSI/GDP SLOT 9

MSI/GDP SLOT 10

MSI/GDP SLOT 11

MSI/GDP SLOT 12

MSI/GDP SLOT 13

MSI/GDP SLOT 14

MSI/GDP SLOT 15

MSI/GDP SLOT 16

MSI/GDP SLOT 17

GPROC-2/GDP SLOT 18

GPROC-2/GDP SLOT 19

GPROC-2/GDP SLOT 20

GPROC-2/GDP SLOT 21

GPROC-2/GDP SLOT 22

GPROC-2/GDP SLOT 23

GPROC-2 SLOT 24

GPROC-2 SLOT 25


KSW SLOT 27

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


BTC SLOT 28

IPSM SLOT 0

IPSM SLOT 1

IPSM SLOT 2

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


11. RECTIFIER MODULE TEST AND COMMISSIONING RESULTS

The first module

Date

Module Type

S/N

No. Item Verified Values Specification Pass Fail Remarks

1 AC Input 198 to 242V

2 Grounding

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


The fourth module

Date

Module Type

S/N


1 AC Input 198 to 242V

2 Grounding

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


12. POWER BOARD TEST AND COMMISSIONING RESULTS.

Power Type

S/N


1 LED Display Checking the

operation of LED

2 Major Alarm

(Mains Fails)

LED Indicated

Alarm activated

3 Minor Alarm

(Rec Fails)

LED Indicated

Alarm activated

4 HV Alarm 58.40 V

5 LV Alarm 48.25 V

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


C. Findings/Outstanding Issues

Document number:

VN-RP-ENG-2004-011


Release Date:

V02

07-Jan-2004


D. Equipment and Installation Pictures

BSC PreventiveMantenance Update Jan2012

Documents

Transcript of BSC PreventiveMantenance Update Jan2012