· BS8100, BS5950 & BS EN 61400-12.1 Hollow Section Speciﬁcations S275 or S355 to BS EN...

www.konastructures.com

KONA are industry leaders in Met Masts and Meteorological Instrument Technologies. We provide a full turnkey solution encompassing Design, Manufacture, Installation, Commissioning, Maintenance and Refurbishment services to our clients across Ireland, UK, Europe, Middle East, and Africa..

We are renowned work at height experts since 1981 and are fully certified with unlimited height insurance for erecting Guyed Masts & Self Supporting Towers.

Our SLX brand of met masts and instrumentation mounts are designed to fully comply with IEC 61400.12.1 for Wind Resource Assessment, Power Curve Testing and Reference Wind Measurements. The SLX model range includes TMMs (temporary met masts) & PMMs (permanent met masts) for Onshore Wind and PMMs for Offshore Wind.

SLX Series 1 - Tubular Met Mast SLX Series 2 - Lattice Met Mast (Light Duty) SLX Series 3 - Lattice Met Mast (Medium Duty) SLX Series 4 - Lattice Met Mast (Heavy Duty) SLX Series 5 - Self Supporting Lattice (Onshore) SLX Series 6 - Self Supporting Lattice (Offshore)

We also offer a full range of Meteorological Instruments, Data Loggers, SoDARS, LiDARS, Ancillaries & Accessories.

Industry leading Installation Methodology & Reporting.

All personnel trained & certified.

Sea Survival trained, certified & equipped.

Helicopter, Musteg, Unimog, Bogmaster experienced.

All work full time supervised.

All sites fully controlled - H&S and Environmental.

Certified loads cells for “pull testing” ground anchors.

Certified remote winching system.

Certified hauling system.

Certified derrick system for tubular masts.

Full Unlimited Height EL & PL insurance.

Certified to ISO 9001, ISO 14001, OHSAS 18001 and Achilles verified company.

SLX masts are CE marking certified.

SLX Mast Structures - reaching new heights in met mast safety

SLX Series 1: Tubular Met MastDesigned as temporary met mast solution for Wind Resource Assessment on single turbine sites (medium wind).

Model range:

SLX Series 1/LD - 10m to 30m. SLX Series 1 - 30m to 50m.

SLX Series 1/HD - 60m to 80m.

Full range of meteorological instrument support booms, ground anchors, mast foundation frames etc. available as required. Designed to BS8100, BS5950 & BS EN 61400:12:1.


SLX Series 1: Tubular Met MastTechnical Specification

Mast Height 70m 60m 50m

Anchor Radius 45m 39m 33m

Guy Wire 8mm RHOL galvanised wire

6mm RHOL galvanised wire


Guy Wire Specification

BS EN 12385-5:2002 (upgrade available for coastal sites)

Galvanising BS EN ISO 1461 (85 micron—upgrade available for coastal sites)

Design Specification BS8100, BS5950 & BS EN 61400-12.1

Hollow SectionSpecifications S275 or S355 to BS EN 10210-1:2006

* The above information is produced for tender purposes only & is subject to site specific alterations at contract stage

70m SLX1 Met Mast 60m SLX1 Met Mast 50m SLX1 Met Mast

IRELAND:

Wireless House 12, Dunboyne Business Park Dunboyne, Co. Meath, Ireland Tel: +353 (0) 1 801 5472

UK:KONA Wind Development Services (WDS), 69 Buchanan Street, Glasgow, G1 3HL Tel: +44 (0) 141 314 3572

UAE:P.O. Box 8431, SAIF Zone, Sharjah, UAETel: +971 4 3372902

[email protected] | www.konastructures.com

SLX Series 2: Lattice Met Mast (Light Duty)Designed as temporary met mast solution for Wind Resource Assessment & Power Curve Testing.

Model range:

SLX Series 2 - 10m to 30m. SLX Series 2/HD - 30m to 50m.

Full range of meteorological instrument support booms, ground anchors, mast foundation frames etc. available as required.Available as part of our Met Mast Rental Scheme as a complete system c/w instruments, data logger & booms to BS EN 61400:12:1.


SLX Series 2: Lattice Met Mast (Light Duty) Technical Specification






Fittings Coiled and terminated guy wires c/w individual guy tensioners, shackles, thimbles & wire grips


Design Specification BS EN 61400-12.1




IRELAND:





SLX Series 3: Lattice Met Mast (Medium Duty)Designed as temporary met mast solution for Wind Resource Assessment & Power Curve Testing.Suitable for re-deployment over a number of sites.Suitable for high altitude sites and ice loading.

Model range:

SLX Series 3 - 30m to 60m. SLX Series 3/HD - 60m to 80m.

SLX Series 3/380 - 80m to 100m.

Full range of meteorological instrument support booms, ground anchors, mast foundation frames etc. available as required.

Designed to BS8100, BS5950 & BS EN 61400:12:1.


SLX Series 3: Lattice Met Mast (Medium Duty) Technical Specification






Guy Wire Specifications







IRELAND:





SLX Series 4: Lattice Met Mast (Heavy Duty)Suitable for Reference Wind Measurements on operational wind farms.Site specific designs for high altitude sites / ice loading / heavy payload.Permanent mast for 25 years on site. Integrated climbing ladder for maintenance.

Model range:

SLX Series 4 - 80m to 125m.

Full range of meteorological instrument support booms, ground anchors, mast foundation frames etc. available as required.



SLX Series 4: Lattice Met Mast (Heavy Duty) Technical Specification













IRELAND:





SLX Series 5: Self Supporting Lattice(Onshore)

Suitable for Reference Wind Measurements on operational wind farms.

Site specific designs for high altitude sites / ice loading / heavy payload. Permanent mast for 25 years on site. Integrated climbing ladder for

maintenance.

Full range of meteorological instrument support booms, mast foundations, anti climb frames etc. available as required.



SLX Series 5: Self Supporting Lattice Met Mast Technical Specifications


Foundation Dims Site Specific







100m SLX4 Met Mast 90m SLX4 Met Mast 80m SLX4 Met Mast100m SLX5 Met Mast 80m SLX5 Met Mast 65m SLX5 Met Mast

IRELAND:





SLX Series 6: Self Supporting Lattice (Offshore)

Suitable for Reference Wind Measurements on operational offshore wind farms.

Full range of platforms, handrails, fall arrest systems, meteorological instruments & sensors, instrument support booms, autonomous power systems, data wireless communications, warning lights and nav-aids

available as required.


SLX Series 6: Offshore Met Mast

Triangular or Square lattice construction incorporating :

Footings designed to connect to foundation interface Peak, cantilever mounts and lightning finials

Full length access ladder / climbing stepsCertified fall arrest system

Work / Rest platformsBooms / mounts for meteorological instruments

Aircraft warning lightsNavigation aids

Meteorological instrumentsData loggers and Data communication systems

Autonomous power supply systemsAll models include 3D modelling, static and dynamic analysis and fatigue assessment of

all major full strength welded connections.All flange welds are full strength type and certificated.

All welding UT testing and certification carried out by qualified independent third party.

Mast Height To client specifications

Foundation Dims Site Specific; to suit foundation

Galvanising BS EN ISO 1461 with 125 micron coating

Design Specification BS8100 BS5950 DNV-OS-J101 OCT 2010.

Hollow SectionSpecifications BS EN 10210 - 1 : 2006. BS EN 10025 - 2 : 2004.


IRELAND:





Dunboyne - IRELAND:

Wireless House 12, Dunboyne Business Park Dunboyne, Co. Meath Ireland Tel: +353 (0) 1 801 5472

Glasgow - UK:

KONA Wind Development Services (WDS), 69 Buchanan Street, Glasgow, G1 3HL Tel: +44 (0)141 314 3572

Sharjah - UAE:

P.O. Box 8431, SAIF Zone, Sharjah, UAETel: +971 4 3372902

Contact Us:

Email: [email protected] Website: www.konastructures.com


· BS8100, BS5950 & BS EN 61400-12.1 Hollow Section Speciﬁcations S275 or S355 to BS EN...

Documents

Transcript of · BS8100, BS5950 & BS EN 61400-12.1 Hollow Section Speciﬁcations S275 or S355 to BS EN...