17

Brown field developmentat an attractive price

Dutch knowledge is called in when the going gets tough

THE PIONEERS OF OFFSHORE ENGINEERING

GustoMSC is an independent and reputable design & engineering

company of mobile offshore units and associated equipment.

In close cooperation with our clients, we translate experience, science and technical knowledge into realistic & innovative ideas.

In this way, GustoMSC enables and supports safe and efficient

operations at sea, contributing to a sustainable future.

www.gustomsc.com

32017

November | 2017

06 | Holland+You Trade between the Netherlands and the Gulf States has increased remarkably and Dutch businesses have built up an excellent reputation. More recently, diversification efforts in the Gulf countries - aimed at reducing dependence on oil and gas and increasing the share of the private sector in the economy - offer new opportunities for the Dutch.

08 | Brown field developmentThe offshore oil and gas industry is developing a general drive to increase the ultimate recovery rates from existing oil and gas fields. Home countries of these reservoirs will benefit from the additional income and decreased need of importing hydrocarbons. The brown fields need to be refurbished during their production life cycle to extend the production horizon.

10 | Stevshark Rex Vryhof has successfully completed extensive field tests with the revolutionary Stevshark Rex Anchor in Australian waters, proving its suitability for hard soils and carbonate soils. The anchor demonstrated extreme holding power.

Offshore Holland is a magazine with the

objective to promote the interests and export

opportunities of the Dutch supply- and service

companies in the upstream oil and gas industry.

Moreover technological developments will be

highlighted in order to contribute to a positive

representation and positioning of the Netherlands

as innovative and ingenious partner country.

Initiators

Supported by

AdvertisingNavingo BV

Jan van Galenstraat 56

3115 JG Schiedam

The Netherlands

Contact: Jeroen Tresfon

T: +31 10 209 2600. E: jt@navingo.com

EditorialHan Heilig - Managing Editor

T: +31 255 530577. E: han@practica.nl

ProductionPeter Ruiter - Practica Productions, IJmuiden

ContributionDaniëlle Veldman (IRO)

©All copyrights reserved by Offshore Holland

04 | Welcome by Guido Landsheer, Deputy Vice Minister for Foreign Trade

12 | Optimizing operational efficiency

14 | Global Excellence, Local Performance

15 | Hi-Traq trenching vehicle

16 | Moving water any way you want it

18 | Inspection of unscrapable pipelines

19 | Temperature measuring solutions

20 | Reel lay vessel Subsea 7

21 | HGI introduces new products

22 | FSM Certificate

23 | Load Solutions

24 | Successful debut on offshore access market

27 | Floorplan Dutch Pavilion

28 | Company profiles Dutch exhibitors

34 | Acquisition of Gardline

THE PIONEERS OF OFFSHORE ENGINEERING

GustoMSC is an independent and reputable design & engineering

company of mobile offshore units and associated equipment.

In close cooperation with our clients, we translate experience, science and technical knowledge into realistic & innovative ideas.

In this way, GustoMSC enables and supports safe and efficient

operations at sea, contributing to a sustainable future.

www.gustomsc.com

4 2017

ADIPEC is one of the premier oil and energy conferences, attracting tens of thousands of attendees and more than 2,000 exhibiting companies from more than 135 countries. This year’s theme is ‘Forging Ties, Driving Growth’, which resembles Dubai Expo 2020’s theme ‘Connecting Minds, Creating the Future’. This similarity is no coincidence as it underscores the UAE’s approach to economic growth. Located as a hub between Europe, Asia and Africa, the UAE understands that achieving sustainable and inclusive economic growth depends on cooperation and innovation. Cooperation and innovation also characterize the oil and gas industry in the Netherlands. The need for cooperation stems from the basic premise that “no one knows all the answers on their own.” Cooperation between the government, private sector and knowledge institutes has produced niche technologies in the areas of production optimization, asset integrity and use of big data to manage oil and gas fields.

The strength of the Dutch energy sector also lies in the fact that we provide a complete value chain proposition, from upstream to downstream activities, and from onshore to offshore solutions.

A second hallmark of the Dutch oil and gas industry is the relentless focus on innovation. Innovation is vital to stay ahead of the curve in a fast changing energy environment but critically important when oil and gas prices are low. Both our governments share the commitment to innovation, which resulted in a Memorandum of Understanding on innovation signed earlier this year by HE Minister Al Mansoori and Minister Henk Kamp. It encompasses government-to- government, business-to-business and knowledge-to-knowledge cooperation on a wide range of topics, including the water-food-energy nexus.

The cornerstone of our engagement with the GCC region is a strong relationship with the UAE. The fact that more than 200 Dutch companies

and knowledge institutes – including leading companies like Shell, Van Oord, Fugro, Boskalis, Wageningen University and Research, TNO as well as many SMEs – call Abu Dhabi or Dubai their home affirms they are long-term partners of the UAE and the wider GCC region.

I am positive that the 2017 edition of ADIPEC will strengthen existing ties and cement new bonds with counter-parts in the UAE and the GCC region. To increase our visibility, the Dutch pavilion will be given a Holland+You touch. Holland+You is a communication and branding platform initiated by the Dutch economic network in the GCC to strengthen the understanding between our country and the GCC region. I wish you a pleasant and productive ADIPEC 2017 and I look forward to having the opportunity to meet with many of you in beautiful Abu Dhabi.

Guido LandheerDeputy Vice Minister for Foreign Trade

It is a privilege to write the introduction to the latest edition of Offshore Holland. As the Dutch Deputy Vice Minister for Foreign Trade, I have witnessed first-hand the innovation, pragmatism and ‘can do’ mentality that characterizes our oil and gas industry. Our experience as a gas producing country and a logistics hub coupled with the international reach of Dutch oil, gas and maritime companies have made us global leaders in this industry. Our focus on innovation and cooperation is why the Netherlands was voted the most competitive country in the European Union in 2016, according to the World Economic Forum. It also helps explain the strong ties between the governments of the UAE and the Netherlands and its peoples. Ties premised on multifaceted economic bonds and a shared focus on innovation, which offers many opportunities to deepen our bilateral relationship. I am therefore excited to welcome all Dutch participants from the oil and gas sector to the annual Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) in Abu Dhabi from 13-16 November 2017.

Welcome

STRUGGLING WITH SAFETY AND RELIABILITY

DURING HIGH PRESSURE TESTING?

High pressure technology is our core competence

With over 25 years of experience in the oil and gas industry, we help our customers make quality business decisions to increase the productivity of their business in a cost-efficient way.

We engineer safe and reliable high pressure solutions for pressure testing, controlling, injection, filling, and other applications.

WWW.RESATO.COM/PRESSURE-TESTING

YOUR HIGH PRESSURE EXPERT.

ADIPEC - STAND 10610MEET US AT

Nord-Lock Benelux B.V. Tel: +31 (0)50-5275656 • Email: info@nord-lock.nlwww.nord-lock.nl

The Nord-Lock Group is focused on solving the toughest bolting challenges. We offer a unique combination of bolting expertise and a wide range of products, including Nord-Lock wedge-locking washers, Superbolt multi-jackbolt tensioners, Boltight hydraulic tensioning system and Expander System pivot technology. All designed and developed at our state-of-the-art production facilities.

Advantages:• Increases worker safety• Accurate & precise• Reduces downtime

Your partner in bolting solutions

Please visit us at: Booth 2B150 at Offshore Europe, Aberdeen Booth 2.010 at Offshore Energy, Amsterdam.

6 2017

More recently, diversification efforts in the Gulf countries – aimed at reducing dependence on oil and gas and increasing the share of the private sector in the economy – offer new opportunities for Dutch companies. The Dutch government in collaboration with business representatives has identified a few key market sectors that are of special interests to the Netherlands in its export endeavours, namely agriculture and horticulture, (renewable) energy, transport and logistics, aviation, health care and the creative industries. With regards to energy, Dutch companies remain market leaders in the oil and gas

sector and affiliated industries. An increasing number of Dutch SMEs have come up with innovative solutions to improve efficiency and enhance performance in this sector. The decline in oil prices has spurred the interest in these innovative solutions. A presence at ADIPEC provides the perfect gateway to furhter explore opportunities in the industry and region.

Gaining foothold ADIPEC is one of the biggest business events within the GCC and a key event within the oil and gas industry. Exhibitions play a crucial role in the

‘Doing Business’ mentality in the GCC. Not only are all the big players of the industry present, it is also the perfect place to gauge the competition. In a region where brand name is very important, it is the perfect way to catch the eye of local and foreign investors alike and gain a foothold in the market.

The IRO and the Dutch Economic Network in the GCC, by means of Holland+You, work together to promote the ADIPEC within the Dutch business community back in the Netherlands and strive to increase the visibility of Dutch

The Gulf Cooperation Council countries (Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates) have experienced high economic growth in recent decades largely due to wealth generated from abundant hydrocarbon reserves. In the meanwhile, trade between the Netherlands and the Gulf States has increased remarkably and Dutch businesses have built up an excellent reputation. As an illustration, the export of goods from the Netherlands to the Gulf reached N6.9 billion in 2015.

What can the Dutch Economic Government Network do for you?

72017 72017

businesses throughout the exhibition. Similarly, the cooperation allows to generate attention for the Dutch Economic Network’s services amongst IRO members. Next to activities at the trade show, the Dutch Economic Network co-organises a Breakfast Session with the BeNeLux Business Council and a reception with the IRO. In doing so, Dutch Economic Network hopes to bring you an improved ADIPEC experience. We encourage companies to reach out to a Dutch Economic Network representative for additional information.

ServicesThe Dutch Ministry of Foreign Affairs by means of its Embassies and Consulate General has established a number of tools in order to help Dutch companies penetrate the GCC market. The Dutch Economic Government Network in the GCC offers numerous services to assist Dutch companies in the region, such as market insights, identification of potential business partners as well as advice on establishing and/or expanding a business in the GCC to help Dutch businesses succeed in this increasingly challenging environment. The different services offered by the Dutch government are listed below:

• Trade requests and sector information: the Dutch Economic Network in the GCC answers trade request regarding, but not limited to, questions about exporting to and investing in the UAE, as well as requesting further information on potential business opportunities. Furthermore, regional sector opportunities reports have been made available. For an overview of the reports, please consult the Holland+You website: www.hollandplusyou.com.

• Business Partner Scan: the Dutch Economic Network in the GCC can source reputable potential business contacts in the specified target market for a small fee. These business partners can include agents or distributors as well as manufacturing partners.

• Company verification: the Dutch Economic Network will verify that a company of interest is correctly registered with the corresponding local authority.

• Trade missions and delegations: the Netherlands regularly organises official trade missions, delegations and joint submissions for exhibitions for and in the Gulf region. The GCC has several trade fairs that may be of interest. For further information on official trade missions and delegations refer to the trade mission agenda on www.rvo.nl. For an overview of all the events and exhibitions in the UAE visit www.hollandplusyou.com or www.eventseye.com.

• Trade disputes: the Dutch Economic Network can provide a list of law firms that can support businesses during a trade dispute. Common trade disputes include different interpretations of contracts and agreements as well as liability disputes arising from breach of local regulations and requirements.

• Support tools: the Dutch Economic Network liaises with ministries and other organisations in the Netherlands. RVO.nl has several tools to support Dutch starts-ups and/or established businesses with international ambitions.

• Other services: the Embassy and Consulate General in the GCC offer Dutch firms access to business contacts through the Dutch Economic Network.

Why Holland+You?The GCC is an increasingly important trading partner for the Netherlands and the Dutch government. In order to make the Netherlands more visible in the region, the Dutch Economic Government Network in the GCC launched Holland+You. Holland+You is a branding and communications toolbox that connects business needs in the region with Dutch solutions and offers a platform for interaction between Dutch and Gulf business stakeholders online as well as offline.

Holland+You focuses on: Generating, Connecting and Creating. Generating more interaction between our businesses, Connecting Dutch expertise and technology to demand in the GCC, and Creating a platform for interaction. We believe that by joining forces and mutually sharing our knowledge, we can together contribute to healthy societies, sustainable economies and a future-proof way of living. For additional information regarding the Dutch Economic Government Network, Holland+You and doing business in the GCC, please do not hesitate to consult the following relevant websites:

Embassy of the Kingdom of the Netherlands in Abu Dhabi:www.netherlandsworldwide.nl/countries/united-arab-emirates UAE Ministry of Economy: www.economy.ae More information about doing business in the Gulf Region:www.hollandplusyou.com Netherlands Enterprise Agency: www.rvo.nl UAE statistics, National Statistics Bureau: www.uaestatistics.gov.ae

8 2017

The offshore oil and gas industry is developing a general drive to increase the ultimate recovery rates from existing oil and gas fields. Home countries of these reservoirs will benefit from the additional income and decreased need of importing hydrocarbons. The existing oil and gas fields, or brown fields, need to be refurbished during their production life cycle to extend the production horizon. Apart from renewing the production platforms topsides and pipelines facilities,it also involves well workover, well intervention and re-drilling of wells to stimulate additional production from the reservoir.

Brown field development in a lower for longer oil price environment

NG-5500X-LD, latest version in GustoMSC’s successful series of self-propelled jack-up designs

92017 92017

Traditionally those well campaigns were undertaken with existing drilling units. For example in shallow waters tender barges or drilling jack-ups would be used. The use of tender barges is limited to existing wellhead platforms that are still able to carry the derrick equipment set. This use is often challenged by the physical condition of those platforms. Existing drilling jack-ups are a good alternative to barges and can operate more independently from the existing platforms with better uptime characteristics, but in-field rig transit and installation time needs to be accounted for. With frequent but short duration workover jobs per platform this will weigh in significantly on efficiency of the rig.

Perfect fit solution The NG-5500X-LD is the latest design in GustoMSC’s successful series of self-propelled jack-up designs, the NG series, of which already a significant fleet of units is in operation for many years.

It is the perfect fit solution for well intervention work in a large number of mature fields in the shallow waters of the Middle East, Asia and NW Europe, using its four legs and thrusters to gain a significant upside on the traditional barges and drilling jack-ups. The unit is suitable for the conditions of the brown fields typically found in the Middle East and Asia, which are characterized by water depths of up to 80 meters, but the unit is also able to work in the much harsher Southern North Sea conditions at water depths up to 50 meters. In this former domain of classic drilling jack-ups and tender barges with associated day rates and operational restrictions, the NG-5500X-LD offers the same intervention capabilities at a much more attractive rate and at modern safety and operational

standards. By being a DP-2 self- propelled four-legged jack-up platform the NG-5500X-LD is much faster to install since no ballasting operation is required for preloading the legs and the rig can move on its own power from one location to the next and by carrying its own cantilever the physical condition of the platform it will work on is not relevant, since all the drilling loads will be carried by the unit.

Key featuresOne of the key features of the NG-5500X-LD is that it is designed with practical operational and survival capability in mind. The unit is capable of remaining offshore when adverse weather conditions occur, reducing downtime due to demobilization and remobilization time. It stays connected to the well but at a reduced combined load, resulting in more workable days, greatly enhancing efficiency and a minimum of non-productive hours. A large clean main deck of over 1,200 m2 provides space for third party equipment, mission specific needs such as X-mas trees, spool pieces and valve blocks as well as space to allocate additional drill pipe, casing or tubing.

The light drilling cantilever truly bridges the gap between the successful

shallow to midwater service units and the full-fledged drilling rigs. The cantilever features the field proven and patented X-Y Skidding System which provides a large drilling envelope of 18.3 m x 7.9 m (60 ft x 26 ft), ensuring access to a vast majority of brown field platform well bay layouts seen in the Middle East, Asia and NW Europe.

ConclusionIn the ever increasing search by oil companies for optimizing cost and reducing risk in extending the economic life of mature oil fields a fast moving, quick installing light drilling unit that has no effect on the production platform is an increasingly interesting option. Such a rig can stimulate the existing wells, perform refracturing operations and even drill into nearby previously untouched parts of the reservoir, as well as install water injectors for additional pressure on the reservoir. The GustoMSC NG-5500X-LD is specifically designed to fulfill such a role at an attractive price and with unmatched technical capabilities, enabling the oil industry to produce longer from their existing assets while keeping the associated risk to their asset very low, due to the maturity of the design and the ingenuity and experience of the engineers behind the design.

NG-5500X-LD, latest version in GustoMSC’s successful series of self-propelled jack-up designs

Installation of a similar cantilever

skidding system on the drilling

jack up Swift 10.

The NG-5500X-LD is equipped with a light drilling

and well intervention system. This design solves

the puzzle of industry demand in reducing cost

and maximizing uptime efficiency.

10 2017

Vryhof has successfully completed extensive field tests with the revolutionary Stevshark Rex anchor in Australian waters, proving its suitability for hard soils and carbonate rocks. This completely new anchor with its radically new fluke and shank geometries has already been designated by insiders as the ‘game changer’ in the mooring industry.

Vryhof successfully tested Stevshark Rex in Australian calcarenite rock

Revolutionary anchor demonstrates extreme holding power

112017 112017

In 2016 a total of 15 tests were successfully carried out at three locations in the North Sea famed for their anchoring problems with stiff clays. In early 2017 the new anchor was used in the United Arab Emirates by a rock cutter suction dredger on cemented soils. The results received from this site were also very positive.

For the most recent test Vryhof selected test sites offshore Australia in close collaboration with Woodside Energy, one of the major Australian operators. “We were very interested in getting the test results of the Stevshark Rex anchor in remote and challenging territories such as the Angel Field in the North West Shelf of Australia with complex cemented soils of carbonite origin or calcarenite to calcilutite to limestone rocks,” explained Amy Rathmel, Geotechnical Engineer with Woodside Energy. “These geological settings can be quite brutal and very hard, so difficult for an anchor to embed.”

Within a period of several days, Deep Sea Mooring Australia coordinated and executed the test. The 18 tonnes Stevshark Rex anchor with 7.2 tonnes ballast was tested in one hundred meters of water at four different locations, each with their own ‘extreme’ soil characteristics. For the execution of the tests, Farstad’s ‘Far Scorpion’, having a bollard pull of 251 tonnes, was deployed.

The first test took place in a carbonate silty sand seabed, up to 4 meters thick and overlaying calcarenite rock.

The second test was performed in a thinner sediment (1 – 2 meters), also with rocks beneath. The soil for the third test consisted of calcarenite rock with rough/irregular topography, while the last test was in calcarenite

rock with a smooth bedrock surface.

All of the tests were successful. The holding power of the Stevshark Rex exceeded all expectations. The open geometry and the protruding fluke tips on the anchor effectively penetrated even the hard rock field at the final test site as predicted.

Leopoldo Bello, Managing Director of Vryhof Anchors said: “We are very pleased with the results of these tests offshore Australia, of course, proving that the Stevshark Rex is more efficient, more predictable and stronger, and delivers holding power

in extreme conditions unmatched by any other anchor. We are grateful to Woodside Energy, Farstad and our Australian colleagues for the fantastic cooperation. At Vryhof Anchors we offer anchoring solutions based on extensive practical experience, as well as knowledge of the geotechnics, experimental research, modelling and testing. The ability to use anchors in challenging soils is a perfect example of how Vryhof combines its products and services to support its customers in optimising the way they address their challenges in a cost efficient manner.”

At Vryhof Anchors

we offer anchoring

solutions based on

extensive practical

experience, as

well as knowledge

of the geotechnics,

experimental

research, modelling

and testing.

Leopoldo Bello,

Managing Director

Vryhof Anchors

12 2017

Optimizing operational efficiency

Add-on equipment drilling jack-ups

Modern day drilling jack-ups are highly specialized machines aimed at drilling wells in the most efficient way. But they are also built to a certain price point and thus cannot always do everything an owner might want to do with it when it is delivered from the yard, or after some years in service. For this reason GustoMSC has developed add-on equipment that will allow the existing jack-up to be used more effectively, increase capability or enable operations beyond the original design conditions.

Optimizing operational efficiency

by integration of new equipment.

132017 132017

The GustoMSC SmartCrane offers unique features that directly address the call for cost reduction from operators, while providing drilling contractors with a means to distinguish themselves. Focus of this equipment was to increase efficiency by enabling simultaneous operations (SIMOPS) independently of any operation in progress on the drill floor and enabling access for safe and efficient material handling underneath the cantilever and between the work platform and drill rig. The economical step change is found in rig day savings in plug and abandonment operations, which can amount to around 10% compared to the conventional procedure, in which all activities such as logging and cementing must be performed in a sequence on the drill floor.

The SmartCrane is fitted out with a series of wire line guide sheaves to guide the wire line to any position where the crane tip can reach. In addition, it provides a 20 metric ton hoisting capacity underneath the cantilever at any position outside the drilling riser, and also has the possibility to reach to the main deck of the rig. It can thus transfer containers and other pieces of equipment (<20mt) from the main deck of the rig to underneath the cantilever and vice versa.

Because of its electrical drive system, the SmartCrane requires little maintenance. It can be installed on a new build rig or retrofitted to an existing rig. Due to the efficient foundation interface, it requires little modification to the existing cantilever structure. The SmartCrane is easily dismountable enabling full reach and combined load capability for cantilever operations when needed. It is even possible to use the SmartCrane on different rigs of the same type when the same integration point is used on similar rigs in the drilling contractor jack-up fleet.

Texas deckA texas deck provides the ability to vertically support the riser or conductor from a separate platform, instead of from the rotary or top drive and move transversely along the stern of the rig. During transit the texas deck is folded up vertically against the stern and while elevated it is lowered into its horizontal working position. The texas deck enables the rig when it is working on subsea templates to temporarily hang off a marine riser with subsea BOP, such that it can install the subsea Xmas tree and pick up the riser again right after installation of the Xmas tree. This type of operation saves valuable time and thus increases the efficiency of the jack-up significantly.

The texas deck can also be used as an access platform to a fixed platform and can take part in the material handling route towards the platform, since it can be skidded within reach of the rig main cranes.

Add-on spudcansWhen a jack-up is assessed for suitability to work on a certain site but fails certain criteria of the site specific assessment, all is not lost. There is always one mitigating measure that can be taken, which is to reduce the VDL and/or combined load acting at the cantilever. But if that is not enough or not desirable there remains one more option: modification of the spudcan. A jack-up always relies on the soil for its stability by preloading the legs up to and beyond the expected maximum survival vertical leg reaction. This can then lead to severe penetration and cause too much leg to protrude below the hull. Another issue that can appear is lack of soil fixity, whereby the original spudcan cannot generate enough soil fixity to relieve the leg-hull interface. Both issues can be solved by enlarging the existing spudcan or fitting it with a skirt or a combination of these, either by using a temporary or a permanent welded structure, or by fitting add-on spudcans. These add-on spudcans are completely pre-fabricated spudcans that are attached to the lower end of the leg chords with a dedicated clamping mechanism. The advantage of using add-on spudcans is that they require very minimal non-productive time of the jack-up since it only needs a marine mating operation that does not even have to take place in a drydock. The add-on will usually be designed with a specific field in mind, enabling the jack-up that was previously unable to do the job to pass the site specific assessment and start working on that field.

14 2017

Dutch industry draws considerable attention in the implementation of remarkable projects worldwide. In all this work, quality and innovation continue to be key principles. Dutch Energy Solutions is founded by Association FME, Association IRO and the Ministry of Economic Affairs.

FocusDutch Energy Solutions focusses on three major topics:

Energy EfficiencyClean power generation with fossil fuels is essential for the future of the world. Rising energy consumption is increasing the emissions of pollutants and greenhouse gases; CO2 in particular. This is detrimental to the environment, specifically through increased average temperatures and related effects on local climates and rising sea levels. To mitigate the problem it is highly important to

develop high quality and efficient equipment. Dutch Energy Solutions promotes companies that contribute internationally to improvement of equipment and processes. Through international co-operation we stimulate early involvement of innovative suppliers to avoid energy spill and find solutions for efficient processes. Members of Dutch Energy Solutions are active in R&D, consultancy, design & engineering, fabrication and maintenance of high quality and efficient instruments and equipment.

Innovative SolutionsClean power generation with fossil fuels is essential for the future of the world. New technologies are developed by R&D institutes together with industrials players. Members of Dutch Energy Solutions like TNO, KEMA, Stork and Tebodin are based in the gulf region to work continuously on new technologies with suppliers and

end users. Innovations contribute to enhanced techniques for oil and gas recovery and smart use of fossil fuels.

Offshore, Logistics & TransportThe Ports of Rotterdam and Amsterdam are amongst the world’s largest. They play a pivotal role in European waterborne logistics. Our engineering and construction firms build amazing maritime structures, such as dykes, ports, bridges and artificial islands.

Dutch suppliers have relevant expertise in areas such as: oil exploration; the design and fabrication of offshore equipment; pipe laying (vessels); (de-)commissioning; and the transport and installation of offshore structures. The expertise of renowned maritime companies and many SME suppliers is founded on four centuries of maritime tradition.

www.dutch-energysolutions.nl

Dutch Energy Solutions is a collaboration of Oil & Gas suppliers, R&D companies, associations and governmental bodies. The objective of the cluster is to establish on-going exchange of information, knowledge and business contacts with partners in the Gulf region. Changing quality, efficiency demand and development of the supply chain in the gulf region ask for international collaboration and innovative solutions.

Global Excellence, Local Performance

Dutch Energy Solutions:

152017 152017

Upon conclusion of the agreement between the parties, Canyon would have the exclusive right to use the first Hi-Traq M1600, an asset built for both mechanical cutting and jetting operations. The modular asset would be available either as a stan-dalone trenching spread on a client asset (vessel or barge for shallow water operations) or on board one of Canyon’s class leading construction and trenching support vessels.

Next generationFollowing years of research and

development, IHC built the Hi-Traq to bring forward the next generation of trenching vehicle to the market. The vehicle offers enhanced manoeuvrability and the powerful tooling will enable safe, efficient burial in a range of seabed conditions. The Hi-Traq vehicle has recently completed onshore cutter testing and is entering final commissioning prior to being mobilised for sea trials. Canyon, with a strong track record in trenching, was the ideal partner to work with IHC to bring together both engineering, design and build

knowledge with operational expertise.

Alongside the co-operation to jointly market Hi-Traq, IHC will be providing further services to Canyon including engineering, modifications and upgrades to existing Canyon equipment. Additionally, both companies will collaborate to utilise existing and new assets to extend the range of services offered from both businesses, involving a wider scope of equipment pushing the businesses forwards in both current and diversified markets.

Introduction of Hi-Traq trenching vehicle

Royal IHC and Canyon Offshore form strategic alliance

Royal IHC has entered into a Memorandum Of Understanding with Canyon Offshore, a U.K. subsidiary of Houston-based Helix Energy Solutions Group, to work towards an exclusive arrangement to jointly bring the Hi-Traq trenching vehicle to the market.

16 2017

Van Heck operates on an international level in the field of water management and movement. With its diversity in pump units, Van Heck operates from dredging, salvage and offshore operations to sewer renovation and cool water applications. Every operation can be customized to meet the wishes of the client and the project’s demands.

Moving water any way you want it

Van Heck operates in the field of water management and movement

The brand new diesel driven HK800.

172017 172017

Van Heck’s equipment is designed and built on their own premises. Van Heck is constantly innovating and developing its fleet. Van Heck is also active in the offshore and maritime industries. Spearhead in these industries is equipment for ballast operations. This equipment is specifically designed for load-outs and float-overs, and ideally suited for salvage operations. The completely autonomous ballast and deballast system can be entirely controlled from a central point and has a total capacity of over 40,000 tons per hour.

CapabilitiesVan Heck’s capabilities in this field:• Load-out: Supply a complete

ballast system, including (ballast) engineering and operation, to load a construction from the shore onto a barge.

• Float-over/mating: Supply a complete ballast system, including engineering and operation, to install a platform on the offshore location.

• Jet trenching: Supply pumps to jet in cables on the ocean floor.

For less complicated operations a mini ballast and/or manually controlled system can be supplied.

Global availability In 2012, Van Heck started to use its proven expertise in water pumps to develop a new, innovative system for ‘green and easy oil recovery’, the Sea Trophy. This oil pump enables fast oil recovery out of fuel or cargo tanks if a ship is in distress or when incorrect fuelling has taken place. The aim of the Sea Trophy is to provide the ship with the ability to recover the fuel or cargo tank’s content in case of an emergency, when no other on-board equipment can help.

In 2016, Van Heck has announced the global availability of the Sea Trophy.

A number of Sea Trophy emergency response kits have been mobilised to strategic locations over the globe.

These sets are suitable for FOR (Fast Oil Recovery) systems on board vessels as well as with the standalone Milk Can solution, making tank access through holes as small as 200 mm diameter possible.

Each Sea Trophy emergency response kit consists of a complete set of tools and accessories, including the hydraulically driven Sea Trophy pump, capable of pumping oil with a flow of 70 m3/h.

Besides in The Netherlands, the emergency response kits will be available from bases in Miami, FL USA and Singapore. By distributing the kits globally, they can be on site very quickly. Every station has its own logistic services and can facilitate the mobilisation and operation of the Sea Trophy adequately.

LargestAfter a complex development process, Van Heck’s engineers succeeded in 2017 to build a mobile pump set with an even larger flow and volume. The brand new diesel driven HK800, like Van Heck’s present pride, the HK700, has been built on 20ft container size. Where the HK700 can pump around 7,000 m³/hour, the HK800 will reach a flow rate of almost 10,000 m³/hour! This comes down to draining an Olympic swimming pool within 15 minutes. The HK800 is extremely suitable for dredging projects and calamities. If desired, this pump set can be supplied with sound reduction. The first HK800 has already been rented for a nice dredging project in Egypt.

Contingency plansVan Heck has accumulated a broad insight into how to respond to diverse emergency situations. Key factors in emergency response are speed and a suitable solution. Van Heck’s contingency plans provide an answer to both these factors.

Advantages of a contingency plan• Significant time gain in reacting

to an emergency;• No need for site visits;• Everyone involved is prepared and

knows what actions must be taken;• Substantial cost reduction because

a prepared emergency response is considerably less expensive than emergency response without a plan;

• Limited damage due to prompt action;

• Professional and reassuring approach towards all parties.

How it worksFlood prone locations as pumping stations or other key areas at risk are best known within your organisation. After an inspection of the location(s) the desired contingency is discussed.

Van Heck proposes the best suited pumps for the location and the required pump capacity. Necessary site preparations and crane positions (and the type of cranes required) are also noted in the contingency plan. Van Heck provides preferably three versions for the pumping solution. This guarantees availability of equipment in case of an emergency.

When the installation drawings are completed, packing lists are produced, stating all the necessary material (pumps, piping, bends, gaskets, bolts and nuts etc.) with a loading plan showing the material divided over the required number of lorries.

18 2017

Roland Hendriks, General Manager of A. Hak Industrial Services Middle East, said: “A. Hak Industrial Services has a strong local presence in the Middle East and an impressive track record in cleaning and inspection of un-scrapable pipelines, which was key to our success in securing this contract. Our personnel and equipment resources are at the leading edge of inspection services, and our turnkey approach ensures the efficient and safe completion of every project.”

Inspection of un-scrapable pipelines is one of the most important services of A.Hak Industrial Services worldwide. With innovative technology, a large range of pipelines can be inspected, scanning the full surface of the pipe wall in high resolution. This allows a full overview of any wall-thickness reductions that may impact the pipeline’s integrity.

Growth strategyCommenting on the award, Rienk de

Vries, Managing Director of A. Hak Industrial Services said: “This contract is another step in our growth strategy to become the reference for un-scrapable pipeline inspections in the Middle East. We are very excited and honoured to work with such a reputable company as Al Tamimi. Combining our strengths, we will have positioned ourselves to serve Saudi Aramco in the best possible way and deliver the highest quality”.

A.Hak Industrial Services Middle East has secured the largest contract in the history of the company. Joining forces with Al Tamimi, the five year contract includes the inspection of the majority of the un-scrapable pipelines of Saudi Aramco in the Kingdom of Saudi Arabia. This award is one of the largest of its kind globally and confirms A.Hak’s position as a leader in delivering pipeline integrity services.

A.Hak signs its largest contract

Joining forces with Al Tamimi Energy to inspect Saudi Aramco’s un-scrapable pipelines

From left to right: Mr. Adnan Kanaan (Manager Pipeline Integrity-A.Hak

ME), Mr. Sulaiman Al-Rumaih (Vice President of P&I Services TAMIMI

Group of Co’s). Shaik Tariq Tamimi (President TAMIMI Group of Co’s),

Mr. Roland Hendriks (General Manager - A.Hak ME), Mr. Haitham

Al-Akkawi (Vice President - P&S TAMIMI Energy), Mr. Hattan Al Juhani

(Tendering Director - P&S TAMIMI Energy) and Mr. Jos Maat (Country

Manager KSA-A.Hak ME).

192017 192017

Joining forces with Al Tamimi Energy to inspect Saudi Aramco’s un-scrapable pipelines

Thermo Electric Instrumentation has been supplying a full range of gas turbine temperature sensors for over 40 years. Temperature sensing equipment is used in a number of places within a turbine engine. From the exhaust temperature, burner temperature, oil temperature, to the bearing (Pill type) temperature sensor. Our Pt100 sensors can also be supplied in a high vibration construction for applications such as within compressors, typically used alongside a turbine.

Our Thermo Electric sensors can be manufactured in either thermocouple or Pt100 construction and the majority of our sensors are assembled under special test conditions, based on the exact customer requirements and specifications.

Quality controlTo guarantee and maintain high quality standards the company is only using the highest quality grade materials. And manufactures all of his semiconductor thermocouples

in a dedicated clean-room – this removes any potential contamination hazards from our processes.

The production processes are underwritten and backed by a fully audited Quality Control System. In addition Thermo Electric Instrumentation supplies all semiconductor thermocouples in suitable packing materials to ensure the integrity of the product is retained in transit and that all products are ready to install upon arrival.

Thermo Electric Instrumentation from Waddinxveen develops, produces and supplies a wide range of modern measurement & control equipment and sensors for identifying and measuring pressure, temperature, flow and level. Quality, knowledge and service are of paramount importance and the company offers, from her expertise in instrumentation, high-quality products.

Specialists in temperature measuring solutions

Thermo Electric Instrumentation from Waddinxveen

Semiconductor Spike and Profile Thermocouples.

20 2017

In close cooperation with Subsea 7, IHC has incorporated several innovative features to make this the most technologically advanced vessel to date. The vessel’s compact dimensions are facilitated by the creative positioning of its three engine rooms and main reel, efficient use of the superstructure, and low-profile pipelay ramp. The smart use of space opens a large aft working deck, whilst the optimised mass distribution minimises the ballast water requirement.

With model tank testing already having been performed, Subsea 7 can be confident that it will receive a vessel from IHC that excels in

performance, both in transit and in DP conditions, and provides maximum comfort for the crew.

The design of the reel lay system focuses on operational efficiency and flexibility, alongside crew safety. The twin tensioner pipelay ramp tilts to allow pipeline installation from shallow waters to depths of up to 3000m. The large multi-level workstation optimises the efficiency of operations in and around the firing line, whilst a fixed auxiliary reel, recessed into the main deck, gives payload flexibility.

Royal IHC has delivered a total of

eight vessels to Subsea 7 in the course of their longstanding relationship. This new Reel lay vessel will be the first to be equipped with a pipe lay system, also designed, engineered and built by IHC.

Dave Vander Heyde, CEO Royal IHC: “We are very proud of the confidence that Subsea 7 has placed in IHC. Our integrated approach to vessel design will give Subsea 7 an industry leading asset that sets a new standard in offshore pipe lay. Based on the ratio between top pipe tension and payload to displacement, this will be one of the most cost effective vessels to enter the market.”

Royal IHC to design and build integrated reel lay vessel for Subsea 7

Most technologically advanced vessel

Royal IHC and Subsea 7 have signed a contract for the design and build of a new reel lay vessel. This high specification vessel will be capable of installing complex rigid flowlines including ºpipe-in-pipe systems. Delivery of the vessel is planned for early 2020.

212017 212017

For years there has been a demand for a portable explosion proof electrical space heater for climate control in the offshore markets. Until today no good alternative has come to the market. For us reason to explore the possibilities to build one.

DevelopmentTogether with a partner Heating Group International has been busy the past few years with the developing of an explosion proof fan heater. Today we are happy to announce we can introduce a mobile explosion proof fan heater of 30kW, the most powerful solution in the market. With a construction on wheels the

heater can easily be moved and with a mounted cetac plug easily installed.

Besides the introduction of the new explosion proof fan heater the company has optimized its existing production lines. With its finned tube air heaters, electric convectors, fan heaters and duct heaters, both explosion proof and for use in safe areas, the Heating Group can now offer a wide range of electric space heating for use in offshore applications. Key points are improving the technical specifications and lower its production costs. Finned tube air heaters and electric convectors are the first heaters the company introduces

with the revised design. Both heaters are being used for frost protection and climate control small rooms. Heating Group has managed to make the heater more compact than the other models. This not only improves the installation of the heater, also the production costs are being reduced with 20%.

Finally, the Heating Group is working on its product line of electrical heating cables. Soon its own brand self-limiting heating cables will be introduced. A complete range of heating cables for process heating as well as frost protection, together with all the necessary accessories.

Heating Group International, one of the leading production companies for industrial electrical heating systems in The Netherlands, is currently working on several new product lines in the field of industrial electrical space heating. For years the production of standardized electrical heaters has been core business for us. The continues improving of excising production lines and the introduction of new innovative heaters are key points in our business model. The policy is to introduce a new and improved heater every two months.

Product development explosion proof electrical heating

Heating Group International introduces several new products

22 2017

In order to obtain the Functional Safety Management certificate Mokveld followed the IEC 61508 chapter 6 and IEC 61511 chapter 5. Mokveld will be audited periodically to maintain this high safety level. During the last couple of years Mokveld already invested heavily in formal training of its staff, today employing more than 30 Certified Functional Safety Engineers. On top of this proof of the knowledge level and capabilities of its staff the Functional Safety Management certificate confirms that Mokveld also has the organisation structure and procedures in place to design, manufacture, integrate, test, inspect and service mission critical safety systems in a controlled manner.

With its head office in Gouda, The Netherlands, Mokveld has over 60 years of experience in designing and manufacturing valve systems for demanding severe service control and safety applications. Mokveld has been the market leader for High Integrity Pressure Protection Systems (HIPPS) for

decades. In addition to the continued focus on the safety performance of the products, now also the safety performance of the organisation behind it is third party certified.

Mokveld Valves, expert in engineered valve systems for the worldwide oil & gas markets is the first valve manufacturer in the world to have implemented a Functional Safety Management System for providing critical safety systems up to safety level SIL3, and to have it third party certified.

First valve manufacturer to receive FSM certificate

Mokveld Valves Gouda

232017 232017

The Van Beest Group, manufacturer of Excel chain accessories and Green Pin wire rope accessories, has acquired Load Solutions, based in Rådal, Norway. Load Solutions is the manufacturer of an innovative high performance chain made of Dyneema fiber and sold under the brand name Tycan. Tycan is eight times lighter than steel chain yet just as strong. By using Tycan customers can achieve greater productivity, reduced costs and a safer working environment for their staff.

Van Beest acquires Load Solutions

Manufacturer of Tycan chain

The product portfolio of Load Solutions is highly complementary to that of the Van Beest Group and will allow the combined businesses to offer customers a comprehensive range of rigging accessories.

Evert van Beuzekom, Vice President Sales and Procurement at the Van Beest Group comments: “Load Solutions from Norway is an industry leader with an innovative product portfolio that will support our growth strategy. The new combination ensures our customers can expect more of the innovative, premium-quality products that they have become used to.We are proud to welcome the Load Solutions employees to the Van Beest team and are excited about growing our business together.”

24 2017

This first SafeWay gangway is currently installed on the 95-metre long OCV ‘Olympic Intervention IV’, owned by Olympic Subsea ASA, Norway. The DP2 vessel, having

excellent seagoing properties, offers accommodation and workspace to 100 passengers (POB) and is chartered by the German wind turbine manufacturer Adwen GmbH for maintenance

activities and trouble shooting at three different wind parks located in the German sector of the North Sea. Under sometimes challenging weather conditions, with significant wave

Successful ‘new technology’ debut on offshore access market

First commercial charter in offshore wind sector for SafeWay

The Van Aalst Group with his headquarters in Dordrecht, the Netherlands, can look back on a very successful debut in the North Sea wind sector with the implementation of the project using the unique SafeWay motion compensated offshore access system. The design for transferring personnel and cargo safely and efficiently from an offshore vessel to a structure is so revolutionary that SafeWay believes the gangway will be a ‘game changer’ in the offshore oil, gas, wind and renewables industries. The unique 28 metre long walk-to-work Seagull-type is able to compensate for significant wave heights of up to 3,5 metre on a standard 75-metre long PSV hull, resulting in an operating window that can be significantly higher than other available systems in the market.

The possibility of a stepless 10-meter vertical height

adjustment enables the access arm of the SafeWay to

maintain a nearly horizontal position in all tidal conditions.

Adwen very consciously chose the SafeWay

gangway for having a unique active ‘free-float’ mode.

heights above 2.8 meter, 851 people transfers were carried out during 173 landings without any problem in 29 days, including an additional 301 cargo transfers. The gangway incorporates a 3D compensated crane capability, for which the design includes a separate winch to transfer up to 400 (or optional 1000) kilos. This efficient transfer of equipment helps expedite the operational work flow as well.

Major advantagesRalf Schuckert, site manager of Adwen, is enthusiastic about the smooth and high performance of the SafeWay gangway, designed to tailor to the needs of different market segments, weather conditions, sea states, cargo and crew loads. Adwen, part of Siemens Gamesa, has experience with other gangways as well, but especially points out two major advantages of SafeWay. Firstly, the 10 meter vertical lifting possibility of the SafeWay is praised by him.

Schuckert: “Secondly, the hovering above bulwark with stairs to a safe area on the turbine deck has great advantages as a 360 degree landing can be realised without any special preparation. That is why Adwen very consciously chose for using this gangway having a unique passive ‘free-float’ mode, the so-called Zero Impact Bumpering mode, enabling the access system to ‘float’ just above the entry point onto a platform or monopile, without actually touching it. Not only does the vessel get more freedom in heading, it also gives the access system greater workability compared to other systems. Moreover the hovering system exclude people from climbing over bulwark, thus increasing their safety.”

Adwen used the SafeWay access system for the first time during the

maintenance campaign at the Trianel Windpark Borkum, where 40 turbines had to be inspected. After this project the ‘Olympic Intervention IV’ was directed to the Wikinger wind park, 35 km off the German Island of Rügen and Germany’s first offshore wind farm Alpha Ventus, located 45 km off the coast of Borkum.

ComfortableMorten Endre Stakvik, captain of the ‘Olympic Intervention IV’ confirms the encouraging comment from client Adwen. “I had never worked before with a walk-to-work system that can be lifted vertically and my experience is quite positive. This gangway is behaving perfectly and it was amazing to witness the speed of the personal transfers as well as the cargo transfers. The cooperation with the SafeWay operators is great. They are very professional and what is more important, they explain the system to the maintenance technicians who make the crossing for the first time, in a very understandable way. And what I understand from these technicians it feels quite natural and comfortable walking 20 metres above sea level from our accommodation vessel to the structure. It’s kind of like crossing a street, but at sea. From the vessel you can walk straight to work in a totally covered construction. Just like walking in a jet bridge to a plane.”

RevolutionaryWijnand van Aalst, managing director of SafeWay, is excited about the excellent feedback. “With the development of the SafeWay we aimed to revolutionize the walk-to-work market, introducing a product which surpasses competition. We learned already from the first crossings earlier this year for Total E&P Nederland and Oranje-Nassau Energie (ONE) that our smart and

innovative approach is a big step forward in technology and safety, the latter being undeniable our number one priority. The system is 100% redundant with in total 440 alarm notifications, so a single-component technical failure will never cause hazardous situations. But in the eyes of the world we now had to prove what we were claiming since we unveiled the distinctive features of this motion compensated gangway in 2015. And that’s why we are so grateful to companies like Olympic Subsea and Adwen that they rewarded our innovative system with this contract and trust our capabilities.”

FeaturesThe Bureau Veritas approved SafeWay motion compensated gangway system incorporates three main features which are unique in the walk-to-work market: 1. Roll compensation: the SafeWay

technology is based on a unique roll cylinder, enabling the system to keep the mast in a vertical position at all times.

2. Height adjustment: the possibility of a stepless 10-meter vertical height adjustment enables the access arm to maintain a nearly horizontal position in all tidal conditions. This rules out unsafe uphill or downhill walking, further enhancing safety.

3. Zero Impact Bumpering: active free floating allowing maximum freedom in vessel heading and zero preparation at the landing point.

Second unitVan Aalst offers all different types of the SafeWay gangway for purchase as well as rental. Based on the positive feedback and market potential, Van Aalst has commenced building a second unit which will be available in Q41 of 2018.

252017

OFFSHORE WIND

MARINE ENERGY

OIL & GAS

Supported by

Savethe Date

Created and produced by

Dutch Pavilionduring Adipec 2017

Company Booth Number Aegex Technologies 11328Ampelmann Operations BV 11318Astava 11330Boskalis 11215Brooks Instrument BV 11320C-Job Naval Architects 11328Control Seal b.v. 11324GustoMSC BV 11230The Hague Business Agency 11328Heating Group International b.v. 11328Huisman Equipment BV 11250IRO 11236, 11328Mokveld Valves BV 11210Navingo BV 11232PECO Select Fasteners BV 11234Royal IHC 11332Selmers B.V. 11322Soluforce 11234Stork 11310Thermo Electric Instrumentation B.V. 11252TPU Services 11328TrustLube B.V. 11328Van Beest B.V. 11316Van Heck 11328Van Oord Offshore BV 11238

11238Van Oord

O�shore BV

11236IRO Lounge

11232Navingo

11234PECO SelectFasteners BV

11250Huisman

Equipment BV

11252Thermo Electric

Instrumentation BV

11234Saluforce

11322Selmers BV

11330

Astava

11324Control Seal BV

11328Aegex Technologies

C-Job Naval ArchitectsHeating Group International BV

IRO - TrustLube B.VVan Heck - TPU Services

The Hague Business Agency

11320Brooks

Instrument BV

11316Van Beest BV

11318Ampelmann

Operations BV

11230GustoMSC BV

11332Royal IHC

11310Stork

11210Mokveld Valves BV

11215Boskalis

OFFSHORE WIND

MARINE ENERGY

OIL & GAS

Supported by

Savethe Date

Created and produced by

272017

mail info@iro.nl

site www.iro.nl

adress Boompjes 40 (Willemswerf)

13th floor 3011 XB Rotterdam

The Netherlands

postal Postbus 390

3000 AJ Rotterdam

The Netherlands

phone +31 (0)79 341 19 81

fax +31 (0)79 341 97 64

www.iro.nl & www.iro-noc.nl

Aegex Technologies manufactures the world’s first globally certified ‘intrinsically safe’ Windows 10 tablet that is purpose-built for the most explosive (ATEX/IECEx Zone 1) hazardous areas in oil & gas operations.

The Aegex10 IS Tablet enables operators to communicate and manage data in real time for more efficient inspections, maintenance, process analysis and other operations.

The Aegex IS tablet is the foundation for an IoT for hazardous locations, where improving efficiency can result in enormous cost savings and decreased downtime, resulting in greater productivity and safety in oil & gas facilities.

Aegex Technologies Unit A4.002, Stationsplein 453013 AK RotterdamThe Netherlandsphone +31 (0)108 081 090mail contact@aegex.com

www.aegex.com Stand 11328

Boskalis is a leading global services provider operating in the dredging, maritime infrastructure and maritime services sectors. Boskalis provides creative and innovative all-round solutions to infrastructural challenges in the maritime, coastal and delta regions of the world.

Boskalis offers a wide variety of marine services and contracting for the oil and gas sector and offshore wind industry as well as salvage solutions, and has a number of strategic partnerships in harbor towage and terminal services.

With a versatile fleet over 900 vessels and floating equipment and 11,700 employees, including associated companies, Boskalis operates in 90 countries across six continents.

Boskalis Rosmolenweg 203356 LK PapendrechtThe Netherlandsphone +31 (0)786 969 000

Stand 11215www.boskalis.com

Since 1956, ASTAVA has been designing and manufacturing instrumentation & safety solutions for the oil & Gas market.

Astava is engeineering and manufacturing instrumentation and safety solutions.

We are serving worldwide the market for instrumentation and safety valves. From product to solutions we can offer a wide range of solutions.

Astava B.V. Industrieweg 307944 HS Meppel The Netherlandsphone +31 (0)522 237 030mail rfq@astava.com

Stand 11330www.astava.com

The global leader in offshore access solutionssets new standards in safety with its motioncompensating systems and services.

Ampelmann’s vision is to make offshore access as easy as crossing the street. The unique Ampelmann systems with fully motion compensating gangways allow safe, efficient and reliable transfers of personnel and cargo from vessels to offshore oil & gas platforms, turbines, F(P)SO’s and all other fixed and floating structures at sea.

Ampelmann has offices in Delft, Singapore, UAE, Qatar, Brazil, Aberdeen, Brunei and Houston. Over 3 million people have alreadywalked to work safely and over 4.5 million kg safe cargo transfers on more than 200 projects worldwide.

Ampelmann Operations B.V. Oostsingel 2092612 HL DelftThe Netherlandsphone +31 (0)202 400 121mail info@ampelmann.nl

Stand 11318www.ampelmann.nl

28 2017

292017

www.brooksInstrument.com Stand 11320

Brooks Instrument - a company of highly trained specialists with 70 years of experience in development and manufacturing of flowmeters.

Our portfolio: Metal Tube & Glass Tube Variable Area Flowmeters, Thermal Mass Flow Meters/ Controllers, Coriolis Mass Flow Meters/ Controllers, Pressure Controllers & Regulators and Vaporizer systems.

Serving EPC companies in oil & gas industries all over the world, we have many years of experience with handling projects, project documentation and test requirements.

Our strength is the ability to produce VA flowmeters for extreme conditions. Brooks Instrument has manufacturing locations, sales, and service offices in the Americas, Europe, Middle East and Asia.

Brooks Instrument B.V. Einsteinstraat 53 3902 HN Veenendaal The Netherlandsphone +31 (0)318 549 300mail Brookseu@BrooksInstrument.com

www.brooksInstrument.com Stand 11320

Stand 11328www.c-job.com

C-Job is an independent design and engineering company, delivering services to the maritime industry

Vision: At C-Job, we have a passion for ships. In everything we do, we offer a high quality, innovative and sustainable service based on the needs of our clients. We want to be the number one professional partner when it comes to design and engineering solutions in the maritime industry.

Mission: Our expertise, passion and involvement make us the no.1 independent design and engineering partner in the maritime industry. Our own success is measured by the success of our clients.

Core value: Your naval engineering partner. C-Job Naval Architects Regulusplein 12132 JN HoofddorpThe Netherlandsphone +31 (0)880 243 700mail info@c-job.com

Stand 11328www.c-job.com

Stand 11324www.controlseal.nl

Control Seal factory was established in 1907 originally as a ship engine producer and its success expanded to a valve manufacturing from 1985 based on significant engineering experience which made Control Seal one of the most experience valve manufacturer in the world.

Today Dutch based company delivered more than 220.000 valves that are installed on many different facilities of the leading end users like Saudi Aramco, Shell, BP or KNPC. Being listed on their approval lists is matter of course.

This position goes with hand of Control Seal main benefit which is longevity of its valves ensuring high performance with low maintenance and spare parts need bringing the end users higher revenue.

Control Seal B.V. P.O. Box 3309900 AH Appingedam The Netherlandsphone +31 (0)596 652 222mail info@controlseal.nl

Stand 11324www.controlseal.nl

See also page 2

The pioneers of Offshore Engineering

GustoMSC is an independent and reputable design & engineering company of mobile offshore units and associated equipment. In close cooperation with our clients, we translate experience, science and technical knowledge into realistic & innovative ideas.

The performance of new and existing jack-ups, vessels and semi-submersibles is further optimized by our operational support and engineering consultancy.

In this way, GustoMSC enables and supports safe and efficient operations at sea, contributing to a sustainable future.GustoMSC B.V.

Karel Doormanweg 353115 JD SchiedamThe Netherlandsphone +31 (0)102883 000mail info@gustomsc.com

www.gustomsc.com Stand 11230

292017

Worldwide Lifting, Drilling and Subsea Solutions

Huisman, founded in 1929, is a worldwide operating company with extensive experience in the design and manufacturing of heavy construction equipment. Our product range can be subdivided into six main categories: Cranes, Pipelay Equipment, Drilling Equipment, Winches, Vessel Designs and Special Projects. Products vary from stand-alone components to highly engineered integrated systems, from concept to installation and life time support.

As we have extensive operational experience with a wide variety of heavy construction equipment, we are able to use the best solutions for new products and projects.

Huisman Admiraal Trompstraat 2-43115 HH SchiedamThe Netherlandsphone +31 (0)880 702 222mail info@huisman-nl.com

Stand 11250www.huismanequipment.com

Heating Group International B.V. is a leading Dutch supplier of industrial electric (process) heating systems. Our key segments are Oil & Gas, Industrial, Ship Building and Commercial Building. Heating Group International designs bespoke heating solutions.

This goes further than the mere realization of the desired temperature within all constraints.

In order to really be able to optimize your processes, we think in integrated solutions; heaters and the control of those. That is unique. We do the design, but we also manufacture and we build the control panels. We supply and build heaters, but we also integrate these into your installation.

Heating Group International B.V. Bijsterhuizen 51186604 LX WijchenThe Netherlandsphone +31 (0)243 434 222mail hgi@heatinggroup.eu

Stand 11328www.heatinggroup.eu

The City of The Hague has a large track record in the Oil & Gas cluster. This stems not only from the proximity of the Port of Rotterdam and its petrochemical industry. The Hague is also home of the headquarters of Royal Dutch Shell.

This is one of the large players that have chosen to be in the proximity of the national government, which plays a major role in licensing for the Dutch North Sea Shelf.

The Hague Business Agency offers you a jump start into the Netherlands, a key strategic location in Europe. We guide you through the regulations, make you feel at home. Free of charge.

The Hague Business AgencyP.O. Box 16067 2500 BB The HagueThe Netherlandsphone +31 (0)683 210 172mail L.Kok@thehague.com

Stand 11328www.thehague.com

IRO - The association of dutch suppliers in the oil and gas industry and offshore renewable industry

Established nearly half a century ago, the association IRO is an independent non-profit organisation that supports and promotes the interests of its nearly 450 member companies.

The IRO members consist of a wide variety of both multinationals and SMEs. They represent the entire supply chain within the Oil, Gas and Offshore Renewable industry, with activities covering: Engineering & Consultancy, Construction & Fabrication, Plant & Equipment Supply, Contracting & Installation, Exploration & Production and Personnel & HSE, both for offshore upstream oil & gas and offshore renewables.

IRO Boompjes 40 3011 XB Rotterdam The Netherlandsphone +31 (0)793 411 981 mail info@iro.nl

Stand 11236, 11328www.iro.nl

30 2017

312017

PECO Select Fasteners BV can be your partner for (quick) deliveries for all kind of (special) fasteners.

PECO has a stock off more than 1000 tons in the complete rage of HSFG BOLTS (M12 UNTILL M72!) According EN 14399-4/6 (DIN 6914-6915-6916)

All European produced, we supply with 3.1 or even 3.2 certificate.

PECO can also supply high material grades as 10.9 , as well as Stainless Steel, Monel, Hastelloy, Duplex 1.4462 and Super Duplex 1.4501.

We sell solutions!PECO Select Fasteners B.V. Ambachtsweg 12 A2641 KS PijnackerThe Netherlandsphone +31 (0)850 432 230mail info@pecoselect.nl

Stand 11234www.pecoselect.nl

Mokveld, experts in engineered valve systems. For critical control and safety applications in the oil and gas industry. HIPPS, control, choke, check, on-off and surge relief valves custom made for the application. Sizes up to 84” pressure ratings up to 2500# and API 10 000. Higher ratings upon request. Onshore, offshore and subsea.

Come to stand 11210 to see the new low shear Typhoon System; a cost efficient way to debottleneck your separation and produced water treatment systems without requiring additional equipment.

Mokveld Valves B.V. P.O. Box 2272800 AE GoudaThe Netherlandsphone +31 (0)182 597 500mail sales@mokveld.com

www.mokveld.com Stand 11210

See also page 26

Offshore Energy Exhibition & Conference (OEEC) is one of Europe’s leading offshore energy events. It is unique in bringing together the oil & gas, offshore wind and marine energy industry. With the industry in transition OEEC offers offshore energy professionals the ideal meeting place to network, discuss and learn about the future of energy.

The event attracts a global audience of more than 12,000 offshore energy professionals. The three-day event features an exhibition where over 550 companies are showcasing their products and services. The accompanying conference addresses current and future issues in the offshore industry, covering developments in oil & gas, offshore wind and marine energy.

OEEC 2018 will take place at Amsterdam RAI on (22), 23 & 24 October 2018

Navingo B.V. Jan van Galenstraat 563115 JG SchiedamThe Netherlandsphone +31 (0)102 092 600mail info@offshore-energy.biz

Stand 11232www.offshore-energy.biz

See also back cover

Royal IHC enables its customers to execute complex projects from sea level to ocean floor in the most challenging of maritime environments. We are a reliable supplier of innovative and efficient equipment, vessels and services for the offshore, dredging and wet mining markets.

With a history steeped in Dutch shipbuilding since the mid-17th Century, we have in-depth knowledge and expertise of engineering and manufacturing high-performance integrated vessels and equipment, and providing sustainable services. With our commitment to technological innovation we strive to continuously meet the specific needs of each customer in a rapidly evolving world.

Royal IHC P.O. Box 32960 AA KinderdijkThe Netherlandsphone +31 (0)880 152 535mail info@royalihc.com

Stand 11332www.royalihc.com

312017

SoluForce® is the originator and technological leader in the research, development, manufacture, supply and installation of Flexible Composite Pipes (also known as RTP).

The SoluForce® pipe system is completely non-metallic and are completely corrosion resistant. When it comes to making marginal offshore oil and gas fields economically viable, SoluForce pipeline solutions offer a number of advantages over steel and other flexible options.

Light, strong, durable and reliable – and with shorter lead times – our pipeline systems are perfect for connecting marginal wells to nearby platforms, so eliminating the need for a new drilling platform. They are quicker, easier and cheaper to deploy with no welding required, no need for hot permits and no need for specialist pipe-laying barges.Pipelife Nederland B.V.

Flevolaan 71601 MA EnkhuizenThe Netherlandsphone +31 (0)228 355 555mail info@soluforce.com

Stand 11234www.soluforce.com

Stork, a Fluor company, maintains, modifies and assures the integrity of production facilities in the oil and gas, chemicals and process, metals and mining, power, and manufacturing industries. We are uniquely positioned to deliver integrated solutions covering the full asset life-cycle, adding value to the business and strengthening the competitive position of our Clients. We offer a wide range of seamless solutions and specialist services across all areas of asset management and maintenance, including

Inspection, Engineering and Consulting services, (Advanced) Non Destructive Testing, Heat treatment, Specialized Mechanical Services, Process Equipment services, Rotating equipment maintenance & services as well as Rope Access services. We also maintain and supply products for Power Services & Heat Treatment. Our key clients include GASCO, ZADCO, ADMA-OPCO, Borouge, Saudi ARAMCO, KNPC, Shell , ORPIC etc. We also have offices in KSA, Qatar, Kuwait and Oman.

Stork Wescon International B.V. Liwa Tower, Office No: 503Near ADNEC, Capital Centre,P.O.Box- 636, Abu Dhabi, UAEphone +971 2 632 7678mail ch.meauh@stork.com

Stand 11310www.stork.com

Thermo Electric Instrumentation B.V. is the market leader in the development and production of temperature measurement systems.

Our manufacturing and testing facilities are located in Waddinxveen, the Netherlands, where we engineer and manufacture thermocouples, RTD`s (Pt100) and thermowells for various markets and industries. Thermo Electric temperature sensors can be used for measuring, regulating, controlling and calibrating every process with a temperature range from the absolute zero point (-273 °C) up to more

than 1250 °C. Our products can be utilized in processes dealing with corrosive chemicals, vibrations, electrical interventions and high pressure. The product range of Thermo Electric includes multi-level temperature sensors for cracker-, storage-, or catalyst-reactor applications, tube-skin temperature sensors for boiler or furnace applications, spiral type thermowell constructions for high velocity applications and high-temperature resistant constructions with for example a double ceramic thermowell assembly.

Thermo Electric Instrumentation B.V. P.O. Box 852740 AB WaddinxveenThe Netherlandsphone +31 (0)857 607 300mail info@te-instrumentation.com

www.te-instrumentation.com Stand 11252

Selmers, a privately owned company from The Netherlands, specialises in the manufacturing of plants and equipment for internal and external pipe cleaning, pipe coating and pipe handling. Established back in 1966, the company has grown into a renowned supplier of comprehensive pipe coating systems, especially of tailor made equipment for both onshore and offshore pipe coating and pipe handling facilities.

Due to its experience, expertise and all-in engineering skills, Selmers manages to stay a step ahead providing new solutions and creating surplus value to its customers. A strong focus on customer needs enables Selmers to create relevant equipment for the pipe coating industry.

Selmers B.V. Biesland 31948 RJ Beverwijk The Netherlandsphone +31 (0)251 211 999mail info@selmers.com

Stand 11322www.selmers.com

32 2017

332017

TPU Services is located at Industrie-terrein Arnestein II in Middelburg, The Netherlands. An ideal location, perfectly attainable by car or by ship: the company is right at the Kanaal door Walcheren. TPU Services builds industrial dosing-skids an retractable injection quills, for the chemical industry. These are obtainable in various types.

The products are CE-certified and comply with all the national and international quality and safety standards. TPU dosing-skids will be established with Ex-proof pumps and therefore applicable in explosion-hazardous areas.

TPU Services and partners have extensive and proved experience manufacturing industrial dosing skids for several applications.

TPU Services B.V. Uijterschootweg 184338 PN MiddelburgThe Netherlandsphone +31 (0)118 625 516mail info@tpu-services.nl

Stand 11328www.tpu-services.nl

Van Oord is a leading international contractor specialising in dredging, marine engineering, and offshore projects.

The growth of the world economy and population increases the global demand for energy. To meet this demand, Van Oord provides integrated solutions with a focus on the installation, stabilisation, and protection of offshore oil, gas, and wind infrastructure.

The deployment of our in-house specialists and equipment allows us to execute engineering, procurement and construction contracts in the field of landfall construction.

Van Oord also leads the market in deep-sea rock installation for stabilising and protecting offshore infrastructure.Van Oord

PO Box 4584200 Al Gorinchem The Netherlandsphone +31 (0)888 265 200mail info@vanoord.com

Stand 11238www.vanoord.com

Van Beest is the leading manufacturer of premium quality lifting, lashing and mooring fittings sold under brands such as Green Pin®, Excel®, Tycan® and Irizar Forge.

Green Pin® is the leading brand for premium synthetic- and steel wire rope accessories such as shackles and turnbuckles and is widely known for its high quality and superior availability.

Our latest innovation, the Green Pin® Power Sling Shackle, enables you to lift the same load with lighter wire rope, reducing cost by 20%.

Van Beest B.V. P.O. Box 573360 AB SliedrechtThe Netherlandsphone +31 (0)184 413 300mail sales@vanbeest.nl

www.vanbeest.nl Stand 11316

Van Heck is an internationally operating company with 50 years’ experience in the field of water control and management. Van Heck’s speciality is often called upon to manage floods.

Van Heck’s expertise includes providing tailor-made solutions for dredging, civil and industrial projects, government and water boards. Van Heck is also active in the offshore industry with ballast services for load-out and float-over operations.

Van Heck’s newest innovation is the Sea Trophy. The first complete mobile pump system that enables the controlled, contained, fast oil recovery after incorrect or off-spec fuelling and in the event of grounding or calamity at sea.

Van Heck P.O. Box 148390 AA NoordwoldeThe Netherlandsphone +31 (0)561 431 739mail info@vanheckgroup.com

Stand 11328www.vanheckgroup.com / www.seatrophy.com

332017

34 2017

Royal Boskalis Westminster has recently acquired all shares of the Gardline Group. The UK based company’s main activities include marine geophysical surveys, offshore geotechnical services and environmental surveys.

Acquisition of subsea survey specialist Gardline

Boskalis fulfils strategic ambition

The ‘Ocean Researcher’.

With the acquisition Boskalis fulfils its strategic ambition to build a position in the offshore survey market and becomes a specialist provider of subsea geotechnical surveys with an exposure to the renewables market and the early cyclical oil and gas market. Gardline operates 15 survey related vessels in addition to 25 smaller vessels including crew transfer vessels and survey catamarans.

The consideration paid including assumed debt amounts to approximately GBP 40 million. The current annual revenue level is approximately GBP 60-70 million. Based on the challenging near-term outlook Boskalis does not expect the transaction to be EBIT accretive within the next few years. This transaction however positions Boskalis well for when end-markets recover.

Gardline was established in 1969 and was a second-generation family-owned business. The company’s principal offices are located in Great Yarmouth, UK with further activities in the USA, Brazil and Singapore. Gardline currently employs approximately 750 employees including a pool of 100 surveyors. With the acquisition Boskalis strengthens its position as marine services provider in Northwest Europe.

352017

The ‘Ocean Researcher’.

Challenging conditions in Offshore industry demand a new appraoch on anchoring.

Lorem dolor reperit incias vition cus ea deribusapit, ommoluptis nessi vo-luptature, nestori tature iscil magnimo loratemporro di de dolor. Lorem Du-sapit, ommoluptis nessi voluptature, nestori tature iscil magnimo loratem-porro di de dolor

Anchor 20tStevsharkMk5(flukeangleswere set based on the anchor anal-ysis carried out by Vryhof);

Chain 3 x 250m 84mm;Wire 1 x 180m 76mm;Buoy 7.5t Sub-Surface Buoy (used as sur-

face buoy preventing the need

TESTED, APPROVED AND INSTALLED

DISCOVER STEVSHARK®REX

REDEFININGBOUNDARIES

STEVSHARK®REX

No anchor can deliver the holding power of the STEVSHARK®REX The application of drag embedded anchors can now be expanded to the most remote and challenging territories on earth. Super strong soils are no longer prohibitive, opening up the economic possibility for operators to develop new energy resources in a much larger area globally.

vryhof.com/stevsharkREX

ROYALIHC.COM

TOGETHER WE CREATETOMORROW’S OFFSHORE

TECHNOLOGY

Ad A4 Adipec.indd 1 20-10-17 09:22