Brogan Reece
Transcript of Brogan Reece
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 1/10
Dancing DroidsDancing DroidsRobot
Team Members
brogan Reece
Mission
Training DateTuesday, 24 March 2009
Welcome to the mission training centre!
Today you will be trained to:
• Explain that computers can control devices
• Write a set of instructions
• Use inputs and outputs to control a model.
• Solve a problem using a robot.
You will need to show excellent team work skills and be
able to communicate with other computer scientists.
Newcastle City Learning Centre – 1/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 2/10
PRE-LAUNCHBefore you start; check your Robot is connected correctly.
Newcastle City Learning Centre – 2/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 3/10
Finding Out – Test 1
1.Build
this
program .
2. Send it
to the
Robot
RUN the program to test the motors. done
Make the robot turn 90 degrees right done
Newcastle City Learning Centre – 3/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 4/10
Make the robot turn 90 degrees left done
Make your robot go forwards for 6 seconds done
Make your robot go forwards slow for 6 seconds done
Make your robot go forwards fast for 6 seconds done
Using a touch sensor: Test 2
Build a program that makesyour Robot move forwards for
6 seconds then backwards
until it bumps into
something.
done
Program your robot to go forwards for 5 seconds when it
bumps into something. done
Can you make the robot do this over and over again? done
Newcastle City Learning Centre – 4/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 5/10
Newcastle City Learning Centre – 5/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 6/10
Using a light sensor: Test 3
Build a program that makesyour Robot move backwards on
a light surface for 1 second
then forwards until it meets
a black line.
Done``
Program your robot to change direction when it meets a
black line.
done
Newcastle City Learning Centre – 6/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 7/10
Mission 1
Program your Robot to move forwards for 4 seconds, reverse
for 3 seconds and stop. done
Mission 2
Program your Robot to travel backwards until it meets an
obstacle then stop. done
Newcastle City Learning Centre – 7/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 8/10
Mission 3
Program your Robot to move backwards until it meets an
obstacle and then move forwards for 3s. done
Mission 4
Program your Robot to move forwards until it comes to a
black line, then reverse and stop when it meets an
obstacle. done
Newcastle City Learning Centre – 8/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 9/10
Mission 5
Program your Robot to move in a circle, travelling
clockwise for 10 seconds. done
Mission 6
Program your Robot to move backwards until it meets an
obstacle and then move forwards until it meets a white
line. done
Newcastle City Learning Centre – 9/10
8/14/2019 Brogan Reece
http://slidepdf.com/reader/full/brogan-reece 10/10
Mission 7The obstacle course.
Use all the techniques from the previous missions to
program your robot to navigate through the course and stop
on the black surface at the end.
Newcastle City Learning Centre – 10/10