BRODD TWIGGY - kalmec.com · Twiggy sweeper is designed to dump into a container or directly on the...
Transcript of BRODD TWIGGY - kalmec.com · Twiggy sweeper is designed to dump into a container or directly on the...
”The flexible sweeper”
Narrow gauge variant of Twist compact sweeper.Suitable for narrow sidewalks and tight spaces.
BRODD TWIGGY®
The small compact trailer sweeper
Sweeping principleBoth side brushes (1) sweep the dirt into themiddle of the sweeper, the roller brush (2)throws the debris directly into the hopper (3). The sprinkler ramp (4) prevents the dust.
1.500 mm dumping height!Twiggy sweeper is designed to dump into a container or directly on the ground. Equipped with a large dirt hopper of 1,15 m3. This feature saves You several time-wasting and expensive daily transports to the discharge place.All operations are operated from a remotecontrol unit in the driver´s cab.
Easy and fast to couple upGo backwards close to the sweeper and couple up the draw bar, connect the electric system for remote control and lighting, connect the gear box with the hydraulic pump to the power-take-off of the towing vehicle.In a few minutes Twiggy is ready for sweeping!
Easy access for serviceThe electric, hydraulic controls, oil filter and water pump are protected from dust, dirt and wetness. They are placed at a convenient working height for service.
2
1
3
4
BRODD TWIGGY®
Full automatic floating broom suspensionDue to the unique ”BRODD float” system the brushes will always be automatically adjusted, no matter the grade of wear on the brushes and they always maintain the correct pressure to the surface.
Sprinkler systemThe water sprinkler system helps to prevent the dust around the sweeper.
Manual refuse input Bigger pieces of rubbish can be put by hand into the dirt hopper, since the top is within comfortable reach.
Remote controlAll sweeping operations are operated from the driver´s cab. Sweeping on/off, water pump on/off, dirt hopper up/down etc.
Side displacement of the draw barTwiggy is as standard equipped with a hydraulicleft/right displacement of the draw bar. It is remote controlled with joystick. The flexibility in curvesand around e.g. poles gets even better and You can simply sweep ”every corner” clean.
95
2465
350
140
0
200
3700
155
0
3000
TGTG00-16 TWIGGY R
rewizja: 2013-09-20
BRODD: 650000 650001
1156.15 kg
2013-09-20tkm
.
.
.
TG00-16 TWIGGY R
TWIGGY 2013Part/Product NAME:
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFBRODD POLONIA SosonowiecANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF BRODD group IS PROHIBITED.
COMMENTS:
WEIGHT: SHEET 1 OF 1
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
DATENAMEDIMENSIONS ARE IN MMTOLERANCES:FRACTIONALANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
DO NOT SCALE DRAWING
--
1FINISH
MATERIAL
REV.A
DWG. NO.SIZE
SCALE:1:50
BRODD POLONIA Sosnowiec
xxxxxx
1156.15 kgD:\TWIGGY\TWIGGY SW\TG00 TWIGGY\TG00-10 PDF1\TG00-16 TWIGGY R 0
1370
750 1
400
155
0
1430
TGTG00-19 TWIGGY T
rewizja: 2013-09-20
BRODD: 650000 650001
1156.15 kg
2013-09-20tkm
.
.
.
TG00-19 TWIGGY T
TWIGGY 2013Part/Product NAME:
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFBRODD POLONIA SosonowiecANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF BRODD group IS PROHIBITED.
COMMENTS:
WEIGHT: SHEET 1 OF 1
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
DATENAMEDIMENSIONS ARE IN MMTOLERANCES:FRACTIONALANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
DO NOT SCALE DRAWING
--
1FINISH
MATERIAL
REV.A
DWG. NO.SIZE
SCALE:1:50
BRODD POLONIA Sosnowiec
xxxxxx
1156.15 kgD:\TWIGGY\TWIGGY SW\TG00 TWIGGY\TG00-10 PDF1\TG00-19 TWIGGY T 0
1370
1000
1430
1900 (1500-2000)
140
0 1
550
TGTG00-17 TWIGGY P
rewizja: 2013-09-20
BRODD: 650000 650001
1156.15 kg
2013-09-20tkm
.
.
.
TG00-17 TWIGGY P
TWIGGY 2013Part/Product NAME:
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFBRODD POLONIA SosonowiecANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF BRODD group IS PROHIBITED.
COMMENTS:
WEIGHT: SHEET 1 OF 1
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
DATENAMEDIMENSIONS ARE IN MMTOLERANCES:FRACTIONALANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
DO NOT SCALE DRAWING
--
1FINISH
MATERIAL
REV.A
DWG. NO.SIZE
SCALE:1:50
BRODD POLONIA Sosnowiec
xxxxxx
1156.15 kgD:\TWIGGY\TWIGGY SW\TG00 TWIGGY\TG00-10 PDF1\TG00-17 TWIGGY P 0
BRODD group
TWIG
GY
ME
201
4
Polhemsgatan 1SE-392 39 Kalmar Tel. +46 480 859 00 Sweden Fax +46 480 172 50www. kalmec.com [email protected]
120 Years of experienceSince 1893 the Brodd Family has been producing high-quality brushes and other sweepingequipment. The third generation of the Brodd Family is today engaged in the production of
high capacity sweepers.
KALMEC ENGINEERINGWith 35 years of experience from the Middle East!
We introduced this kind of sweepers in 1983 in the Middle East countries and now based uponour wide experience we are pleased to present our new model with several technical improvements.