brochure design 83.imimg.com/data3/GD/MS/MY-2119512/cl_vardhmanelectromech.pdf · Vector Group...

4
FIND ON MAP REGESTERED OFFICE AND PLANT: VARDHMAN ELECTROMECH (PVT.) LIMITED. F-674, Phase-II, RIICO Industrial Area, Jaipur-302022 (Raj.) Tel : +91 141 6594601/2397768(O), Cell : +91 9829051599, +91 9829781124, Fax : +91 141 2398928 WWW.VARDHMANELECTROMECH.COM FOR SALES INQUIRY: Email: [email protected] FOR GENERAL INFORMATION: Email: [email protected] www.vardhmanelectromech.com MANUFACTURE OF DISTRIBUTION & POWER TRANSFORMERS VARDHMAN ELECTROMECH INNOVATION | RELIABILITY | QUALITY

Transcript of brochure design 83.imimg.com/data3/GD/MS/MY-2119512/cl_vardhmanelectromech.pdf · Vector Group...

Page 1: brochure design 83.imimg.com/data3/GD/MS/MY-2119512/cl_vardhmanelectromech.pdf · Vector Group Dyn11, Ynd11,Dyn5, Dd0 etc Frequency 50 Hz Insulation Class A Cooling ONAN/ONAF Winding

FIND ON MAP

REGESTERED OFFICE AND PLANT:

VARDHMAN ELECTROMECH (PVT.) LIMITED.

F-674, Phase-II, RIICO Industrial Area, Jaipur-302022 (Raj.)

Tel : +91 141 6594601/2397768(O),

Cell : +91 9829051599, +91 9829781124,

Fax : +91 141 2398928

WWW.VARDHMANELECTROMECH.COM

FOR SALES INQUIRY:

Email: [email protected]

FOR GENERAL INFORMATION:

Email: [email protected]

www.vardhmanelectromech.comMANUFACTURE OF DISTRIBUTION & POWER TRANSFORMERS

VARDHMAN ELECTROMECH

INNOVATION | RELIABILITY | QUALITY

Page 2: brochure design 83.imimg.com/data3/GD/MS/MY-2119512/cl_vardhmanelectromech.pdf · Vector Group Dyn11, Ynd11,Dyn5, Dd0 etc Frequency 50 Hz Insulation Class A Cooling ONAN/ONAF Winding

PRODUCTS

OIL FILLED TRANSFORMERS Vardhman make Oil filled transformers are innovatively engineered to achieve

optimum performance for its unique application.

• Step Up and Step down transformers

• Sturdy designs to withstand unpredictable system conditions

• Quality raw material and systems ensures long life of transformers

• Electrolytic Grade (EC) copper for excellent results

• Prime Grade CRGO used for longer life

• BEE complied 3-star rating green transformers for low losses

• Tailor made designs to meet customer requirement

SALIENT FEATURES:

TECHNICAL DATA:

Ratings & Voltage Class-Single Phase from 5KVA upto 200KVA 33KV Class

-Three Phase from 25KVA Upto 10MVA 33KV Class

Duty Indoor/Outdoor

Applicable Standards IS: 2026, IEC: 60076, BS, SANS, ANSI,DIN etc

Losses As per relevant standard/Customer requirement

Impedance As per relevant standards or as per customer requirement

Tapping Off Circuit Tap Changer(OCTC) or On load tap Changer(OLTC)

Vector Group Dyn11, Dyn5, Yzn11 etc

Frequency 50 Hz

Insulation Class A,B

Cooling ONAN/ONAF

Winding Material Copper(Cu)/ Aluminum (Al)

Insulating FluidMineral Oil or Synthetic Ester Oil confirming to relevant

standards or as per customer requirement.

Accessories and Fittings As per customer requirement

Vardhman Electromech Pvt Ltd. is one of the leading quality manufacturers of

Oil Cooled and Dr Type Transformers based at Jaipur, India. Established in year

1997 by a team of visionaries, Vardhman has supplied its transformers to

industrial giants like L&T Construction, Cairn Energy, Hindustan Zinc Limited,

Rays Power Expert(Pvt.) Limited to name a few and also supplied to various

State Bodies/Utilities such as NHAI, PWD, RHB, RSRDCL, KMDA, RRVPNL,

JdVVNL, AVVNL etc. Vardhman has implemented ISO 9001-2008 system to

ensure quality at each stage be it incoming, in-process, outgoing or final stage

inspections. With the help of our vendor partners and ample in-house

manufacturing facility, Vardhman is able to produce and supply its quality

products to its customers on time.

Spanning over an area of ---------- sqft. Vardhman has state of the art

manufacturing equipments and testing facility. Its testing Laboratory is fully

equipped with necessary instruments to carry out Routine Tests as per

required relevant standards. Vardhaman has the facility to design,

manufacture and test 10MVA 33KV Class Transformers and has an annual

capacity of 1000MVA. With the combination of constant innovation and R&D,

Vardhaman is able to cater successfully to the industries' changing needs over

the years. Our main objective at Vardhman is to support and respond on time

to its esteemed customers in every possible way so that that partnership can

go a long way.

ABOUT US

Page 3: brochure design 83.imimg.com/data3/GD/MS/MY-2119512/cl_vardhmanelectromech.pdf · Vector Group Dyn11, Ynd11,Dyn5, Dd0 etc Frequency 50 Hz Insulation Class A Cooling ONAN/ONAF Winding

TECHNICAL DATA:

Ratings & Voltage Class Three Phase from 100KVA Up to 2MVA 11KV Class

Duty Indoor/Outdoor

Applicable Standards IS: 11171, IEC: 60726, BS, SANS, ANSI,DIN etc

Losses As per relevant standard/Customer requirement

Impedance As per relevant standards or as per customer requirement

Tapping Off Circuit Tap Links (OCTL) or On load tap Changer(OLTC)

Vector Group Dyn11, Dyn5, Yzn11 etc

Frequency 50 Hz

Insulation Class F,H

Cooling AN/ANAF

Winding Material Copper(Cu)/ Aluminum (Al)

Accessories and Fittings As per customer requirement

DRY TYPE TRANSFORMERS

With proven designs and performing well in Western countries, Dry Type Transformers are

now widely used in Indian market as well. Vardhman make Cast Resin and Vacuum Pressure

Impregnated Dry Type Transformers are engineered with precision to perform well and

efficiently.

• Maintenance Free

• No Fire hazard therefore suitable to use in indoor applications

• Self Extinguishing and hence very safe

• High resistance to temperature fluctuations

• High Impulse and Short Circuit Strength

• Environmental friendly

• Low Partial Discharge

• Cable drop can be reduced as can be placed near to Load center

• Capable of withstanding vibration condition hence high performance

in earth quack prone areas.

SALIENT FEATURES:

Hermetically Sealed Oil filled transformers are widely used these day all over the world for its

compactness, excellent heat dissipating properties and longer life. Vardhman make Hermetically

sealed transformer is most commonly installed inside Package Sub-Stationsin India.

HERMETICALLY SEALED OIL FILLED TRANSFORMERS

• Step Up and Step down transformers

• Sealed type Bolted top with dry air inside.

• No conservator, so expansion of oil takes place through flexible

corrugated walls or compression of dry air.

• Maintenance free as oil has no contact with external air thus no contamination of oil.

• Suitable for installation inside Package sub-stations.

• Compact in size as compared to Normal Tank with PSR Radiators

• Excellent heat dissipation properties through corrugated fin walls.

• Can be with corrugated fins walls or Press Steel Radiators

• DGPT2/DMCR Relay for multiple protections is optional.

• Tailor made designs to meet customer requirement

SALIENT FEATURES:

TECHNICAL DATA:

Ratings & Voltage Class Three Phase from 25KVA Upto 1600 KVA 33KV Class

Duty Indoor/Outdoor

Applicable Standards IS: 2026, IEC: 60076, BS, SANS, ANSI etc

Losses As per relevant standard/Customer requirement

Impedance As per relevant standards or as per customer requirement

Tapping Off Circuit Tap Changer(OCTC) or On load tap Changer(OLTC)

Vector Group Dyn11, Dyn5, Yzn11 etc

Frequency 50 Hz

Insulation Class A

Cooling ONAN

Winding Material Copper(Cu)/ Aluminum (Al)

Accessories and Fittings As per customer requirement

Insulating FluidMineral Oil or Synthetic Ester Oil confirming to relevant

standards or as per customer requirement.

Page 4: brochure design 83.imimg.com/data3/GD/MS/MY-2119512/cl_vardhmanelectromech.pdf · Vector Group Dyn11, Ynd11,Dyn5, Dd0 etc Frequency 50 Hz Insulation Class A Cooling ONAN/ONAF Winding

SPECIALITY TRANSFORMERS

• LIGHTING/ISOLATION TRANSFOMRERS

• AUTO TRANSFORMRS

• FURNACE TRANSFROMERS (ARC AND INDUCTION)

• RECTIFIER TRANSFORMERS

• HIGH VOLTAGE TRANSFORMERS

Contributing a bit towards Green Environment, Vardhman manufactures

Transformers suitable for Solar Power Generation.

SOLAR INVERTER TRANSFORMERS

• Step Up transformers only

• Available in 2/3/4/5/6 winding

• Harmonics Content well within limits.

• Neutral may be Float type or suitable for Solid earthing

• Galvanized Shield is provided between HT and LT winding to reduce Harmonics

• Tailor made designs to meet customer requirement

SALIENT FEATURES:

TECHNICAL DATA:

Ratings & Voltage Class Three Phase from 500KVA Upto 5MVA 33KV Class

Duty Indoor/Outdoor

Applicable Standards IS: 2026, IEC: 60076, BS, SANS, ANSI etc

Losses As per relevant standard/Customer requirement

Impedance As per relevant standards or as per customer requirement

Tapping Off Circuit Tap Changer(OCTC) or *On load tap Changer(OLTC)

Vector Group Dyn11, Ynd11,Dyn5, Dd0 etc

Frequency 50 Hz

Insulation Class A

Cooling ONAN/ONAF

Winding Material Copper(Cu)

Accessories and Fittings As per customer requirement

Insulating FluidMineral Oil or Synthetic Ester Oil confirming to relevant

standards or as per customer requirement.

* Depends up on availability from manufacturer

SERVICESWe understand the losses incurred by our customers when it comes to failure of transformer.

That's why Vardhman has developed a dedicated team to bring back transformer into life at

the earliest possible time. Apart from expertise in manufacturing new transformers,

Vardhman's technical team is fully equipped to provide following services on transformers up

to 10MVA 33KV Class irrespective of transformer make.

Overhauling and Reconditioning:

Annual Rate Contract:

Repairs of damaged/failed transformer

Transformer rating Capacity Enhancement

Supply of Spares

CLIENTELE & APPROVALS:

Rajasthan Housing Board

Public Works Departments