Brochure 3
121
CI/SfB Xt7 Commercial and public buildings
-
Upload
poorni-dassanayake -
Category
Documents
-
view
142 -
download
12
Transcript of Brochure 3
CI/SfB Xt7
Allgood plc297 Euston RoadLondon NW1 3AQTelephone: 020 7387 9951Facsimile: 020 7380 1232E-mail: [email protected]: www.allgood.co.uk
63-83 Brearley StreetBirmingham B19 3NTTelephone: 0121 359 4415Facsimile: 0121 359 5832E-mail: [email protected]: www.allgood.co.uk
28 Queen StreetManchester M2 5HXTelephone: 0161 834 6717Facsimile: 0161 834 6839E-mail: [email protected]: www.allgood.co.uk
The Wright Business Centre1 Lonmay Road, Glasgow G33 4ELTelephone: 0141 773 6298Facsimile: 0141 771 9569E-mail: [email protected]: www.allgood.co.uk
uk projects
Allgood Worldwide297 Euston RoadLondon NW1 3AQTelephone: +44 (0)20 7255 9330Facsimile: +44 (0)20 7383 7950E-mail: [email protected]: www.allgoodww.com
overseas projectsCommercial and public buildings
CI/SfBXt7
- comm
ercial and public buildings
Allgood would like to thank Ergonom, Domus Tiles, PB Digital and Rob Wyatt Photography for their contributions to this brochure.
All information and details in this brochure are correct at time of going to press. However, Allgood plc reserves the right to change the product specifications without notice.
All dimensions are subject to production tolerances of ± 1mm.
Printed on Consort 155, a paper produced using an environmentally friendly, elemental chlorine-free bleaching process, whilst its fibre contains raw materials sourced from Forest Stewardship Council (FSC) sustainable sources.
0, 9, sembla, modric and 8 are registered trademarks.
© Allgood plc 2011FS 14846EMS 552362advancing architectural ironmongery
1
From stunning work environments to the most prestigious public buildings, Allgood has the expertise and experience to manage the entire door hardware co-ordination from design concept to final handover.
2
P.5
3. accessories
1.
P.29
2.
P.5
P.29
P.15
3
4. washroom
5. 8
Contents
P.45
P.53
6. index P.113
4
5
Finishes and grips Lever handlesPull handlesEntrance pull handles
6-78-9
10-1112
1.
6
The main design principle of Sembla is the central node; the component which makes the physical connection to the door.
Around the node a choice of pulls, grips and tips may be selected, allowing the specifier the opportunity to choose the detail that most suits their aesthetic requirement.
The Sembla range is available in various finishes, providing a wide choice of aesthetic options. To select the product in the finish that you require, just add the finish prefix to the part number of the item.
If you would like to substitute the standard grip and tip to one of the alternative, please add the grip suffix to the end of the product number.
SPSTSatin Stainless Steel. Polished Stainless Steel.
KTKnurled Satin Stainless Steel grip and tip.
LTLight Wood grip and tip.
Sourced from a FSC (Forest Stewardship Council) sustainable approved source, Light Wood grips are made from beech timber.
77
MAModric Anodised Aluminium.
Finishes and grips
DTDark Wood grip and tip.
Sourced from a FSC (Forest Stewardship Council) sustainable approved source, Dark Wood grips are made from beech timber with a rich mahogany stain.
STSoft Touch grip and tip.
Soft Touch Sembla is a polyurethane based black coating with excellent durability. The finish gives the visual effect of low gloss with a soft feel, providing a tactile gripping experience.
Alternative colours available on request.
LELeather grip and tip.
Leather Sembla can provide an interior with a continuation of a soft furnishing theme and provide a warm and luxurious grip.
8
57
20
50
148
3
57
20
147
50
3
57
20
147
50
3
3623 3643Sembla lever handles with straight grip and drum tips on concealed Quadaxial fixing roses. Finishes: ST • SP • MAGrips: KT • LT • DT • ST • LE
Sembla lever handles with straight grip and bullet tips on concealed Quadaxial fixing roses. Finishes: ST • SP • MAGrips: KT • LT • DT • ST • LENote: Bullet tips supplied plain
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.
All Sembla lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
99
3626 3646 3640Sembla lever handles with crescent grip and drum tips on concealed Quadaxial fixing roses.Finishes: ST • SP • MAGrips: ST
Sembla lever handles with crescent grip and bullet tips on concealed Quadaxial fixing roses.Finishes: ST • SP • MAGrips: LT • DT • ST • LENote: Bullet tips supplied plain
Sembla lever handles with propeller grip and bullet tips on concealed Quadaxial fixing roses.Finishes: ST • SPGrips: XST • LENote: Bullet tips supplied plain
Lever handles
57
20
146
50
3
57
20
147
50
3
57
20
148
50
3
57
20
148
50
3
57
20
147
50
3
57
20
146
50
3
10
1628 1648Sembla pull handle with drum tips and bolt through fixings. 400mm centres.Finishes: ST • SP • MAGrips: KT • LT • DT • ST • LE
Sembla pull handle with bullet tips and bolt through fixings. 400mm centres.Finishes: ST • SP • MAGrips: KT • LT • DT • ST • LENote: Bullet tips supplied plain
1628BB Pair, as above, with back-to-back fixings.
1648BBPair, as above with back-to-back fixings.
1629Sembla pull handle as 1628 but with 600mm centres.
1629BB Pair, as above, with back-to-back fixings.
1649
1649BB
Sembla pull handle as 1648 but with 600mm centres.
Pair, as above, with back-to-back fixings.
400/600
6520
453/653400/600
6520
454/654
1111
1638 1668Sembla pull handle with straight tips and bolt through fixings. 400mm centres.Finishes: ST • SP • MAGrips: KT • LT • DT • ST • LE
Sembla pull handle with crescent tips and bolt through fixings. 400mm centres.Finishes: ST • SP • MAGrips: ST
Pull handles
1638BBPair, as above, with back-to-back fixings.
1668BBPair, as above, with back-to-back fixings.
1639Sembla pull handle as 1638 but with 600mm centres.
1639BBPair, as above, with back-to-back fixings.
1669Sembla pull handle as 1668 but with 600mm centres
1669BBPair, as above, with back-to-back fixings.
400/600
6520
639/839 400/600
6520
639/839
12
1729 1729CSembla entrance pull handle with drum tips and bolt through fixings. 600mm centres.Finishes: ST • SP • MAGrips: LT • DT • ST • LE
Sembla cranked entrance pull handle with drum tips and bolt through fixings. 600mm centres.Finishes: ST • SP • MAGrips: LT • DT • ST • LE
1729BBPair, as above, with back-to-back fixings.
1729CBBPair, as above, with back-to-back fixings.
Note: Additional length Sembla entrance pull handles can be made to order. Please contact Allgood for specification advice.
38
692 600
38 76
692 600
10038
13
Entrance pull handles
14
15
2 .
Finishes Lever handlesPull handles
16-1718-2324-27
16
The Modric range of door funiture was conceived in 1965 on the basis of a dimensionally and asethetically co-ordinated range of items to allow maximum interchangeability.
The principle of modular unsprung components was revolutionary and Modric soon became a design classic.
Through continuous development to the range, Modric today represents a timeless, clean-cut range of door funiture available in a number of metallic finishes. Products are hand finished to provide the very best quaility available. Modric is known for fine design and extraordinary durability.
SS PSSatin Stainless Steel. Polished Stainless Steel.
17
Finishes
MAModric Anodised Aluminium.
18
3502
3502D
3503Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • MA
As above but with extra projection from the door.Finishes: SS • PS • MA
Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • MA
127
19
52
3
50
127
19
52
3
50
140
50
65
3
19
48
125
19
52
3
50
125
19
52
3
50
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.
All Modric lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
19
3504 3506Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • MA
Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • MA
Lever handles
60
137
11
22
50
3
133
22
55
3
50
133
22
55
3
50
3506DAs above but with extra projection from the door.Finishes: SS • PS • MA
139
22
6748
50
3515Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • MA
24
115
58
3
50
20
3530Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
50
3
28
1950
137
16
16
28
50
3
28
1950
137
16
16
28
3520Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
56
3
12
2250
135
12.5
25
25
56
3
12
2250
135
12.5
25
25
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.
All Modric lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
21
3540Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
Lever handles
45
3
25
1850
1351045
3
25
1850
13510
3545Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
44
3
20
1850
12710
44
3
20
1850
12710
22
3560Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
57
3
20
2050
146
57
3
20
2050
146
3550Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
57
3
20
2050
146
57
3
20
2050
146
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.
All Modric lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
23
Lever handles
3570Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS
59
3
20
2050
130
59
3
20
2050
130
24
Other lengths available to special order. Please note, the maximum recommended fixing centres for handles utilising two fixings is 1200mm. Please contact Allgood for specification advice.
6594 6594CModric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • MA
Modric cranked pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • MA
6594BBPair, as above, with back-to-back fixings.
6594CBBPair, as above, with back-to-back fixings.
6597 6597CModric pull handle as 6594 but with 600mm centres.
Modric cranked pull handle as 6594C but with 600mm centres.
6597BBPair, as above, with back-to-back fixings.
6597CBBPair, as above, with back-to-back fixings.
419/619
19 70
400/600
90
400/600419/619
63
19
25
59
500/700 400/600
25
12.5
Pull handles
1720Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1720BBPair, as above, with back-to-back fixings.
1721Modric pull handle as 1720 but with 600mm centres.
1721BBPair, as above, with back-to-back fixings.
1730Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1730BBPair, as above, with back-to-back fixings
1731Modric pull handle as 1730 but with 600mm centres.
1731BBPair, as above, with back-to-back fixings
500/700 400/600
28 61
16
1740Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1740BBPair, as above, with back-to-back fixings
1741Modric pull handle as 1740 but with 600mm centres.
1741BBPair, as above, with back-to-back fixings
55
500/700 400/600
2510
26
Other lengths available to special order. Please note, the maximum recommended fixing centres for handles utilising two fixings is 1200mm. Please contact Allgood for specification advice.
1750Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1750BBPair, as above, with back-to-back fixings
1751Modric pull handle as 1750 but with 600mm centres.
1751BBPair, as above, with back-to-back fixings
63
500/700 400/600
19
1745Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1745BBPair, as above, with back-to-back fixings
1746Modric pull handle as 1745 but with 600mm centres.
1746BBPair, as above, with back-to-back fixings
500/700 400/600
20 5510
27
67
500/700 400/600
19
Pull handles
1760Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1761Modric pull handle as 1760 but with 600mm centres.
1760BBPair, as above, with back-to-back fixings
1761BBPair, as above, with back-to-back fixings
1770Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS
1771Modric pull handle as 1770 but with 600mm centres.
1770BBPair, as above, with back-to-back fixings
1771BBPair, as above, with back-to-back fixings
19
400/600419/619
65
28
29
Escutcheons and WC turnsPush and kick platesDoor stopsCoat hooksFlush and ledge pullsDoor signageMandatory signage
30-3132-3334-3536-3738-3940-4142-43
3. accessories
30
796Q 8Euro profile cylinder escutcheon.Finishes: SS • PS • MA
Euro profile cylinder pull.Finishes: SS • PS • MA
38 18
76
3
50
98580Escutcheon for use with 8397 lock.Finish: SS (XX98580SS)
13 11
20 13
accessories
31
771Q2532 771Q2531WC turn on concealed fixing rose.Finishes: SS • PS • MA
WC turn on concealed fixing rose.Finishes: SS • PS • MA
Escutcheons and WC turns
3
50
303
50
27
20
65
786QEmergency release.Finishes: SS • PS • MA
3
50
60
779QEmergency release with external indicator.Finishes: SS • PS • MA
50
360
13010WC turn on concealed fixing rose.Finishes: SS • PS
50
453
100
700
1.5
6801KPush plate.Finishes: SS • PS • MA
6801GPush plate. Finishes: SS • PS • MA
761.5
450
32
accessories
Push and kick plates
33
6851Kick plate.
• 1.5mm thick
• Dimensions to suit any application
Finishes: SS • PS • MA
34
2301 2304Door stop.Finishes: SS • PS • MA
Magnetic door holder.Finishes: SS • PS
35
38
47
35
10
27
15
10
50 2.5
25
2302Door stopFinishes: SS • PS • MA
22
32
32
accessories
35
Door stops
2307Door stop.Finishes: SS • PS • MA
102
25
1619
63
2308Door bumper.
Finishes: SS • PS • MA
3247
26
2305Door stop.Finishes: SS • PS • MA
2311Door stop.Finishes: SS • PS • MA
2309Door stopFinishes: SS • PS
385
25114.5
342
47
Coat hook.Finish: MA
65506546Coat hook.Finish: MA
5522
70
1813
85
50
36
accessories
6551Buffered coat hook.Finish: MA
Coat hooks
6555Coat hook.Finish: MA
1813
40
1813
88
53
6557Coat hook.Finishes: ST • SP
4762
5720?
37
38
6250Flush pull handle. Tested to BS EN 1634 for 30 and 60 minutes. Finishes: SS • PS • MA
6250FPIntumescent pack for 6250 and 6260 flush pull handles.Finish: XX
152
223
152
6215Flush pull handle.Finishes: SS • PS • MA
76
38 133
accessories
39
1714/10Ledge pull. Finishes: SS (XX1714/1S) PS (XX1714/1P)
30
45
100
2.5
1714/20Ledge pull. Finishes: SS (XX1714/2S) PS (XX1714/2P)
30
45
200
2.5
1716/20As above but with 70mm projection. Finishes: SS (XX1716/2S) PS (XX1716/2P)
Flush and ledge pulls
1716/10As above but with 70mm projection. Finishes: SS (XX1716/1S) PS (XX1716/1P)
6260Flush pull handle. Tested to BS EN 1634 for 30 and 60 minutes. Finishes: SS • PS • MA
152
223
25
76
30
70
100
2.5
30
200
70
2.5
40
8432‘Male’ sign.Finishes: SS • PS • MA
76
3
8433‘Female’ sign.Finishes: SS • PS • MA
76
3
8456‘Shower’ sign.Finishes: SS • PS • MA
76
3
76
2
76
2
76
2
8440‘No Smoking’ sign.Finishes: SS • PS • MA
76
2
accessories
41
Door signage
8457‘Baby change’ sign. Finishes: SS • PS • MA
76
BabyChange
2
76
2
8434‘Unisex’ sign.Finishes: SS • PS • MA
8435‘Disabled’ sign.Finishes: SS • PS • MA
76
2
8459‘First aid’ sign.Finishes: SS • PS • MA
76
2
8436‘Ambulant’ sign.Finishes: SS • PS • MA
76
2
8458‘Cloakroom’ sign. Finishes: SS • PS • MA
76
3
76
2
accessories
8447‘Automatic fire door keep clear’ sign.Finishes: SS • PS • MA
76
2
8448‘Fire door keep locked’ sign.Finishes: SS • PS • MA
76
2
42
8449‘Fire door keep shut’ sign.Finishes: SS • PS • MA
Mandatory signage
76
2
Push bar to open100
600
30057‘Push bar to open’ sign.Finish: XX (plastic)
43
45
Doc M grab rails 46-47Dispensers and bins 48-51
4. washroom
46
16000TRClip on toilet roll holder for use with 16000N.Finish: SS
16000NLift-up grab rail.Finish: SS
850
350
35
90250
111
105
25
8
153
47
washroom
47
16001NGrab rail.Finish: SS
16002NBackrest rail.Finish: SS
16002PBackrest pad for use with 16002N.Finish: XX (white vinyl)
Doc M grab rails
35
90600
95 60
400
250
90
35
295
45
365
9851598510Counter mounted soap dispenser.Finish: SS
150
53
30.9
57
32 45
Wall mounted soap dispenser.Finish: SS
88
170193
63
washroom
48
Dispensers and bins
98520Wall mounted waste bin.Finish: SS
99
369
270
49
50
washroom
98530Wall mounted paper towel dispenser.Finish: SS
278 103
344
17
51
98540Wall mounted maxi roll dispenser.Finish: SS
150 12110
308 300
Dispensers
52
53
5.
Hinges 54-57Floor springs 58-61Floor spring accessories 62-65Cubicle pivot sets and pivotsOverhead door closers 68-69Slide arm overhead door 70-71closers Electrohydraulic and swing 72-73 free overhead door closersConcealed overhead door 74-77closers Selectors and stays 78-79Electromagnetic hold open 80-81devicesAutomatic door operators 82-83 Push pads and power 84-85transfer devices71’ series locks 86-8971’ series accessories 90-9199’ series redlocks 92-94Solenoid redlocks 94-95Cylinders 96-97Cubicle deadlocks and roller 98-99catchesElectromagnet shearlocks 100-101Surface mounted 102-103electromagnetsPanic hardware 104-105Flushbolts 106-107Flushbolt accessories 108-109Spindles 110-111Miscellaneous hardware 112
66-67
54
8064CB
100
100
Butt hinge.
• Loadbearingcapacityto120kg
• Concealed self-lubricating bearings
• Maintenancefree
• Completewithstainlesssteelwoodscrewsfor timber door fixings
• IndependentlytestedtoBSEN1935 4 7 6 1 1 4 0 13
CE marked 1121-CPD-AC0099•
Certifire approved CF287•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 25 year guarantee
Finishes: SS • PS
8066CBButt hinge.
• Load bearing capacity to 120kg
Concealed self-lubricating bearings•
• Maintenance free
• Completewithstainlesssteelwoodscrewsfor timber door fixings
• IndependentlytestedtoBSEN1935 4 7 6 1 1 4 0 13
CE marked 1121-CPD-AC0099•
Certifire approved CF287•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 25 year guarantee
Finishes: SS • PS
8066RCBAs above but with 10mm radius corners.Finishes: SS • PS
8064RCBAs above but with 10mm radius corners.Finishes: SS • PS
100
75
55
114
114 93
125
3535
1111
16.5
16.5
1910.5 11.511.5 10.5
125
93
Hinges
8080CB8069CBButt hinge.
• Load bearing capacity to 120kg
Concealed self-lubricating bearings•
• Maintenance free
• Complete with M6 12MT posidrive truncated undercut stainless steel machine screws for metal door fixings
• IndependentlytestedtoBSEN1935 4 7 6 1 1 4 0 13
CE marked 1121-CPD-AC0099•
Certifire approved CF287•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 25 year guarantee
Finishes: SS • PS
Butt hinge.
• Load bearing capacity to 200kg
Self-lubricating bearings•
• Maintenance free
• Completewithstainlesssteelwoodscrewsfor timber door fixings
• IndependentlytestedtoBSEN1935
CE marked • 1121-CPD-AC0120
Certifire approved CF287•
Incorporated in successful fire tests and • assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 25 year guarantee
Finishes: SS • PS
8069MTMetal threaded screws for use with 8069CB hinge on metal doors. One pack per hinge. Finish: XX
100
75
8068CBButt hinge.
• Load bearing capacity to 120kg
Concealed self-lubricating bearings•
• Maintenance free
• Complete with M6 12MT posidrive truncated undercut stainless steel machine screws for metal door fixings
• IndependentlytestedtoBSEN1935 4 7 6 1 1 4 0 13
CE marked • 1121-CPD-AC0099
Certifire approved CF287•
Incorporated in successful fire tests and • assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 25 year guarantee
Finishes: SS • PS
4 7 7 1 1 4 0 14
8025L/RRising butt hinge.
• STATE HAND (EG. 8025L or 8025R) - Left hand shown
• Load bearing capacity to 60kg
• Requiresregularlubrication
Minimum door thickness: 29mm•
• Only2butthingesrequiredperdoor
Finishes: SS • PS
8026L/RFalling butt hinge.
• STATE HAND (EG. 8026L or 8026R) - Right hand shown
• Load bearing capacity to 60kg
• Requiresregularlubrication
Minimum door thickness: 29mm•
• Only2butthingesrequiredperdoor
Finishes: SS • PS
100
77
100
77
56
Hinges
100
75 2828
117
79
10218NPConcealed hinge.
Minimum door thickness: 41mm•
Incorporatedinsuccessfulfiretestsand• assessed to BS 476 Pt 22 up to 30 minutes.
Finish: XX (Nickel plated)
8081CBButt hinge.
• Complete with integral security bolt
• Load bearing capacity to 120kg
Concealed self-lubricating bearings•
• Maintenance free
• Completewithstainlesssteelwoodscrewsfor timber door fixings
• IndependentlytestedtoBSEN1935 4 7 6 1 1 4 0 13
CE marked 1121-CPD-AC0099•
Certifire approved CF287•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 25 year guarantee
Finishes: SS • PS
57
8064FPIntumescentpackfor8064CBhinges.
Finish: XX
8066FPIntumescentfor8066CB,8080CBand8081CBhinge.
Finish: XX
8068FPIntumescentfor8068CBhinges.
Finish: XX
8069FPIntumescentfor8069CBhinges.
Finish: XX
58
Options
• 9331SL Single action, left hand•9331SR Singleaction,righthand•9331D Doubleaction
9331
Note:9331 floor spring does not come with straps and top centres. Please specify the relevant accessories for your application (page 62-63).
Commander floor spring and cover plate.
• Adjustablepower(3-6)
• Adjustableclosingspeed
• Fixed backcheck operational from 70°
• Maximumdoorweight:300kg
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0229/32•
Certifire approved CF731•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
10 year guarantee•
Finishes: SS • PS
3 8 6/3 1 1 4
362
342
54
82 105
59
Floor springs
9331SO
Note:9331SO floor spring does not come with straps and top centres. Please specify the relevant accessories for your application (page 62-63).
Commander hold open floor spring and cover plate.
• Adjustablepower(3-6)
• Adjustableclosingspeed
• Fixed backcheck operational from 70°
• Maximumdoorweight:300kg
• IndependentlytestedtoBSEN1154
10 year guarantee•
Finishes: SS •PS
3 8 6/3 1 1 4
362
342
54
82 105
Cavalier floor spring and cover plate.
• Adjustablepower(1-4)
• Adjustableclosingspeed
• Maximumdoorweight:150kg
• Fixedbackcheckoperationalfrom70˚
• Holdopenversionavailable-specify9347SO (non fire doors)
• Topreventwateregressintothefloorspringunit,specifyXX9331XGsealingcompound,whichsealsthefloorspringinto the floor box
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0230•
Certifire approved CF731•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 60 minutes on timber doors
10 year guarantee•
Finishes: SS •PS
60
9347
Note:9347 floor spring does not come with straps and top centres. Please specify the releavnt accessories for your application (page 62-63).
298
278
42
82 105
3 8 4/1 1 1 4
61
9531Commander electrohydraulic floor spring and cover plate.
• Electrohydraulichold-openfacilityfrom80° onwards
• 24VDC/110ma
• Adjustablepower(3-6)
• Adjustableclosingspeed
• Maximumdoorweight:300kg
• IndependentlytestedtoBSEN1155
CE marked 0672-CPD-0231/33•
Certifire approved CF731•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
10 year guarantee•
Finishes: SS •PS
Note:9531 floor spring does not come with straps and top centres. Please specify the releavnt accessories for your application (page 62-63).
3 8 6/3 1 1 4
348
328
54
82 105
15
17
Options
•9531SL Singleaction,lefthand•9531SR Singleaction,righthand•9531D Doubleaction
Floor springs
62
9331STC516mm single action offset top centre.Finish: SS
25mm single action offset top centre.Finish: SS
9331STC6
48
48
22
8
3˚�
8194
194
194
Top centre
Strap
22
25
25
25
22
8
8
Strap cover
30mm ø
48
48
22
8
3˚�
8194
194
194
Top centre
Strap
22
25
25
25
22
8
8
Strap cover
30mm ø
39
22
8
8194
194
194
Top centre
Strap
Strap cover
3∞
8
8
39
22
30mm ø
22
16
16
39
22
8
8194
194
194
Top centre
Strap
Strap cover
3˚
8
8
39
22
30mm ø
22
16
16
39
22
8
8194
194
194
Top centre
Strap
Strap cover
3∞
8
8
39
22
30mm ø
22
16
16
39
22
8
8194
194
194
Top centre
Strap
Strap cover
3∞
8
8
39
22
30mm ø
22
16
16
9331SBS516mm single action offset bottom strap.Finish: SS
25mm single action offset bottom strap.Finish: SS
9331SBS6
63
9331DTC9331STC3
Intumescentpackforsingleactionstraps.Finish: XX
Intumescentpackfordoubleactionstraps.Finish: XX
36mm single action offset top centre.Finish: SS
Double action top centre.Finish: SS
9331SFP
9331DFP
Floor spring accessories
32 22
8
200
40
Top centre
Strap
40
165
200
30
34
42
21
63
8
22
18
18
32 22
8
200
40
Top centre
Strap
40
165
200
30
34
42
21
63
8
22
18
18
39
22
8
8194
194
194
Top centre
Strap
Strap cover
3∞
8
8
39
22
30mm ø
22
16
16
59
22
8194
194
Top centre
Strap
Strap cover
8
59
22
30mm ø
22
36
36
36
8194
8
3 ∞
59
22
8194
194
Top centre
Strap
Strap cover
8
59
22
30mm ø
22
36
36
36
8194
8
3 ∞
Extensionspindlefor9331,9331SO,9347and 9531 floor springs to achieve clearance from finished floor level.
Depth Full product No. Clearance
10mm XX9331SP10 18mm
20mm XX9331SP20 28mm
30mm XX9331SP30 38mm
40mm XX9331SP40 48mm
50mm XX9331SP50 58mm
Finish: XX
9331SP
9331DBS9331SBS336mm single action offset bottom strap.Finish: SS
Double action bottom strap.Finish: SS
64
Coffin box for 9331 floor spring.
Finish: XX
Coffin box for 9347 floor spring.
Finish: XX
Coffin box for 9531 floor spring.
Finish: XX
9331CB
9347CB
9531CB
345
144
58 55
3
84 124
331
143
54 51
3
83 123
281
146
46 43
3
86 126
65
Floor springs accessories
9331CT10
9347CT10
9531CT10
9331CC
9347CC
9531CC
Carpet tray for 9331 floor spring.Finish: XX
Carpet tray for 9347 floor spring.Finish: XX
Carpet tray for 9531 floor spring.Finish: XX
Cover plate for use with 9331CB coffin box.Finish: XX
Cover plate for use with 9347CB coffin box.Finish: XX
Cover plate for use with 9531CB coffin box.Finish: XX
364.5
45 62 110
10
350.5
45 62 110
10
300.5
45 62 110
10
9331AKFloor spring coffin box anchor kit.Finish: XX
66
13001Double action pivot.
• For emergency use in hospitals or wherever the ill or infirm run the risk of falling over and blocking an inward opening bathroom or toilet door
• Allows the door to swing in either direction. Specifically designed for use with the 13006 emergency release door stop
• Bottom bracket is frame mounted but must be floor supported when used on doors weighing in excess of 30kg
• Maximumdoorweight:80kg
• Maximumdoorwidth:1100mm
• Maximumdoorthickness:44mm
Finish: SS
80
6
6
6
6
5237
110
110
52
52
130
67
Cubicle pivot sets and pivots
9250Heavy duty floor pivot.
• 150kgloadcapacity
• Thrustrollerbearing
• Extendedspindleheightavailableto special order
Finish: SS
Emergency release door stop.
• Tobeusedwith13001 double action pivot.Intheeventofsomeonefalling againstthedoorontheinside,the emergency release door stop can be depressed,allowingthedoortoopen outwards
• Stop release resets automatically
• Includesholdbackfacility
• Allows single action doors to operate as double action when hung on centre pivots
Finish: SS
13006
80
40
25.2 28.664
3R814
314024
20
Note:9250 pivot does not come with straps and top centres. Please specify the relevant accessories for your application (page 62-63).
4527
1032
45
3036
9098
15
68
9251/6
29755
72
Universal closing overhead door closer.
• Universal fixing (Fig 1 & Fig 6)
• Adjustablepower2-4(Fig1)and1-3(Fig6)
• Adjustableclosingspeedwithindependentlatch action
• Adjustablebackcheckbetweenangleofoperation,65°–180°
• Maximumdoorweight: 80kg (Fig1) / 60kg (Fig6)
• Maximumdoorwidth: 1100mm (Fig1) / 950mm (Fig6)
• IndependentlytestedtoBSEN1154 in Fig 1 application
• IndependentlytestedtoBSEN1154 in Fig 6 application
CE marked 0672-CPD-0225•
Certifire approved CF704•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS •PS • MA
4 8 4 /2 1 1 4
4 8 3 /1 1 1 4
69
Delayed closing overhead door closer.
• Delayed closing function with 0-30 second adjustabledelaybetween70°-180°
• Universal fixing (Fig 1 & Fig 6)
• Adjustablepower2-6(Fig1)and1-5(Fig6)
• Adjustableclosingspeedwithindependentlatch action
• Adjustablebackcheckbetweenangleofoperation,70°–180°
• Maximumdoorweight: 120kg (Fig1) / 100kg (Fig6)
• Maximumdoorwidth: 1400mm (Fig1) / 1250mm (Fig6)
• IndependentlytestedtoBSEN1154 in Fig 1 application
• IndependentlytestedtoBSEN1154 in Fig 6 application
CE marked 0672-CPD-0226•
Certifire approved CF704•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS •PS • MA
Overhead door closers
9251/6DC
29755
72
4 8 6 /2 1 1 4
4 8 5 /1 1 1 4
9251FNFace fixing bracket to suit flush frames for use in Fig 1 applications with 9251/6 and 9251/6DC overhead door closers.Finishes: SS •PS • MA
9256FNAlternative face fixing bracket for use in Fig 6 applications with 9251/6 and 9251/6DC overhead door closers.Finishes: SS •PS • MA
58
58
23
20
44
56
72
36
70
Slide arm overhead door closer for single action doors.
• Fixedtoopeningfaceofdoor
• Adjustablepower(2-3)
• Adjustableclosingspeedwithindependentlatch action
• Adjustablebackcheckbetweenangleofoperation,65°–180°
• Maximumdoorweight:60kg
• Maximumdoorwidth:950mm
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0227•
Certifire approved CF703•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS •PS • MA
9267
4 8 3/2 1 1 4
297
448.5
55
72
30.5
20.5
71
297
448.5
55
72
30.5
20.5
Slide arm overhead door closers
9268Slide arm overhead door closer.
• Fixedtoopeningfaceofdoor
• Adjustablepower(3-6)
• Adjustableclosingspeedwithindependentlatch action
• Adjustablebackcheckbetweenangleofoperation,70°–180°
• Maximumdoorweight:120kg
• Maximumdoorwidth:1400mm
• IndependentlytestedtoBSEN1154
CE marked 0432-CPD-0010.01•
Certifire approved CF703•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS •PS • MA
3 8 3/6 1 1 4
Electrohydraulic hold-open overhead door closer.
• Electrohydraulichold-openfacilityfrom80°–180°
• 24VDC/45ma
• Fixedtoopeningfaceofdoor
• Completewithblackloop(9581armouredloop sold separately)
• Adjustablepower(1-6)
• Adjustableclosingspeed
• Maximumdoorweight:120kg
• Maximumdoorwidth:1400mm
• IndependentlytestedtoBSEN1155
CE marked 1121-CPD-0228•
Certifire approved CF704•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS •PS • MA
9551
3 8 6 /1 1 1 4
34052
72
72
Options
•9551L Singleaction,lefthand•9551R Singleaction,righthand
Electrohydraulic and swing free overhead door closers
34052
72
Swing-free overhead door closer.
• 24VDC/45ma
• Fixedtoopeningfaceofdoor
• Completewithblackloop(9581armouredloop sold separately)
• Adjustablepower(1-6)
• Adjustableclosingspeed
• Maximumdoorweight:120kg
• Maximumdoorwidth:1400mm
• IndependentlytestedtoBSEN1155
CE marked 1121-CPD-0228•
Certifire approved CF704•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS •PS • MA
9571
3 8 6 /1 1 1 4
9581Surface mounted armoured loop.
• Alternativebrackettobeusedwith9551L/R or 9571L/R door closers
• Fortimberandmetaldoorframes
Finish: XX
30
45
50 19
73
Options
•9571L Singleaction,lefthand•9571R Singleaction,righthand
9133S
74
Fully concealed overhead door closer for single action doors.
• Adjustablepower(2-4)
Maximum door weight: 130kg•
• Maximum door width: 1100mm
Minimum door thickness: 40mm•
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0069•
Certifire approved CF242•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 60 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS • PS
9133SEAsabove,butwithtrackandarmcompletewith electrical hold open device for single action doors.
Finishes: SS • PS
3 8 4 /2 1 1 4
45
20.7
440
8.5
31
32240
75
Concealed overhead door closers
9134S
32
8.5
440
247 40
20
54
10
Fully concealed overhead door closer for single action doors.
• Adjustablepower(3-6)
Maximum door weight: 180kg•
• Maximum door width: 1400mm
Minimum door thickness: 50mm•
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0069•
Certifire approved CF242•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 60 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS • PS
9134SEAs above but with track and arm complete with electrical hold-open device for single action doors.
Finishes: SS • PS
3 8 4 /2 1 1 4
9133FPIntumescentpackfor9133Sand9133SEconcealed door closers.Finish: XX
9134FPIntumescentpackfor9134Sand9134SEconcealed door closers.Finish: XX
9135D
76
Fully concealed overhead door closer for double action doors.
• Adjustablepower(2-4)
• Adjustablehydraulicbackcheck
Maximum door weight: 130kg•
• Maximum door width: 1100mm
Minimum door thickness: 40mm•
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0069•
Certifire approved CF242•
The mortice for body and slide channel •mustbeincreasedby1mminallplanes,toaccommodate the XX9315FP intumescent pack
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 60 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS • PS
9135DEAsabove,butwithfinishedtrackandarmcomplete with electrical hold open device and intumescent pack for double action doors.
Finishes: SS • PS
3 8 4 /2 1 1 4
20.7
10
440
240 40
31
45
20.7
90 4520.7
77
Concealed overhead door closers
9136D20
.7
10
440
250 40
31
54
20.7
90 4520.7
Fully concealed overhead door closer for double action doors.
• Adjustablepower(3-6)
Maximum door weight: 180kg•
• Maximum door width: 1400mm
Minimum door thickness: 50mm•
• IndependentlytestedtoBSEN1154
CE marked 0672-CPD-0069•
Certifire approved CF242•
Incorporatedinsuccessfulfiretestsand• assessed to BS EN 1634-1 and BS 476 Pt 22 up to 60 minutes on timber doors and 240 minutes on metal doors
10 year guarantee•
Finishes: SS • PS
9136DEAs above but with track and arm complete with electrical hold-open device for single action doors.
Finishes: SS • PS
3 8 4 /2 1 1 4
9135FPIntumescentpackfor9135Dand9135DEconcealed door closers.Finish: XX
9136FPIntumescentpackfor9136Dand9136DEconcealed door closers.Finish: XX
78
Concealed overhead door restraining stay.
• Adjustablefrictionslideblockandspring buffer to cushion door opening
• Notforusewithconcealeddoorclosing devices
• Canbefittedtosetthemaximumopening to70°,90°or110°
Finish: XX
11004
495
13
16
933
79
Selectors and stays
9149GSelector stay for pairs of rebated doors with flush overpanels.
• The door selector will only allow the door leaves to close in the correct order maintaining the fire resistant seal
• IndependentlytestedtoBSEN1158
CE marked 1121-CPD-AF0001•
• Incorporatedinsuccessfulfiretestsandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on both timber and metal doors
10 year guarantee•
Finishes: SS •PS • MA
3 5 5/3 1 1 3
45
9
219 25
4877
77
4127
103
9.5
4555
71
71
55
19
1945
9
219 25
4877
77
4127
103
9.5
4555
71
71
55
19
19
45
9
219 25
4877
77
4127
103
9.5
4555
71
71
55
19
19
80
71
86
86
73
2825
27
47
9409Electromagnetic hold open device.
• 24vDC/71mA
• 112newtonsholdingforce
• Canbeusedinconjunctionwithanystandard door closer or floor spring
• Theunitisfail-safe,holdingthedooropenuntil released through alarm activation or power failure
IndependentlytestedtoBSEN1155 •
CE marked 1121-CPD-AE0018•
Certifire approved CF 531•
Incorporatedinsuccessfulfiretestsand•assessed to BS EN 1634-1 and BS 476 Pt 22 up to 120 minutes on timber doors and 240 minutes on metal doors
Finish: SS
3 5 6 / 3 1 1 3
81
9410
Electromagnetic hold open devices
9409BFloor mounting bracket.
• Usedinconjunctionwith9409and9410to create a floor mounted electromagnetic hold open device.
Finish: SS
Surface mounted sleeve.
• Usedinconjunctionwith9409tocreatea surface mounted electromagnetic hold open device.
Finish: SS
110.5
100.5 50.5
85
21
21
85 36
82
70
20.5
122650
710
70
7070
122650
71941
71943
71944
Single operator, frame mounted on pull side ofdoor.Completewith71999safetysensorsand71999COsafetysensorcut-outswitch.
Finish: XX
As above but a pair for double doors.
As above but a pair for double doors.
71942Single operator, frame mounted on push side ofdoor.Completewith71999safetysensorsand71999COsafetysensorcut-outswitch.
Finish: XX
83
Underfloor automatic operators
570
210
135
64
85
OUTSIDE
INSIDE
OUTSIDE
INSIDE
71961NSinglefloormountedoperator.Forusewithlefthandeddoors,openingin(seebelow).
Finish: XX
71962NAsabove,butforusewithrighthandeddoors,openingout(seebelow).
570
210
135
64
85
OUTSIDE
INSIDE
OUTSIDE
INSIDE
71963NSinglefloormountedoperator.Forusewithrighthandeddoors,openingin(seebelow).
Finish: XX
71964NAsabove,butforusewithlefthandeddoors,openingout(seebelow).
OUTSIDE
INSIDE
71965NDoublefloormountedoperator.Forusewithdoubledoorsopeningin(seebelow).
Finish: XX
OUTSIDE
INSIDE
71966NAsabove,butforusewithlefthandeddoors,openingout(seebelow).
84
79052NArmoured loop
• Surfacemounted
• Designedforcarryingmaximum24v,8mmdiameter cable from door frame to door
• Greynyloncoveredspringcable
• Noconnections/cableprovided
Finish: XX
71921Circularpushpadwith‘DISABLED PuSh tO OPEN’ infilled in blue.
Finish: XX
71920Asabove,withplainpushpad.
Finish: XX
71926Surfacemountedsurroundforusewithabove push pads.
Finish: XX
PUSHTO OPEN
114
114 21
48
22
40
85
Push pads and power transfer devices
100
75292 259
24
79053N 8066CT2Concealed armoured loop.
• Designedforcarryingmaximum24v,6mmdiameter cable from door frame to door
• Whendoorisclosedtherearenovisiblesigns of connection
• Loopmaybeinstalledeitherwayup,withchannel in door or frame
• Notsuitablefordoubleactiondoors
• Nickelplatedonsteel(otherfinishesavailableonrequest)
• Notsuitablefor240vACcable
Finish: XX
TwowaypowertransferbutthingewithNewtonBearing.
• Twinpowerconductors
• Grade304stainlesssteel
• Maintenancefreeandtotallycorrosionproof,withsmootheractionthanballbearings and uprated load bearing
• 1200mmfreetailsoneachsideofhinge
• Maximum50v/500mAperconductor
• Fordoorsupto120kg,whenusedinconjunctionbetweenapairof8066CBhinges
• Hingemustbesecondfromtopofdoorormiddle position
Finishes: SS • PS
8066CT8Asabovebutwitheightwaypowertransfer.
Finishes: SS • PS
86
7104F60 7108F60Verticalmorticelatch.
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7104FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN12209 3 X 1 0 G B 0 2 0
• CE Marked 1121-CPD-AG0062
• CertifireapprovedCF537
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
Verticalmorticebathroomlock.
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7108FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN12209
• CE Marked 1121-CPD-AG0061
• CertifireapprovedCF537
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
80
38
11
60
93
16521.5
466332
45
20
12
235
78
38
11
60
93
1651021.5
466332
35
45
72
20
12
235 8
3 X 1 0 G - B 0 2 0
The 71 Series modular lock system is a full suite of heavy duty mortice locks for unsprung door furniture with many benefits.
• Modularcasesizesforeasierdoor preparation.
• 80mmand100mmbacksetoptionsalso available. Contact Allgood for details.
• Lowfrictionlatchboltsgivesasmoother andquieterlockingactionandreduces damage to the door.
• Reversiblestrikeplates.
• Unique‘griptight’followerswhichprevent movement of the spindle within the follower,thuseliminatingloosenessof lever handles
• Solidstainlesssteellatchbolts,deadbolts and followers provide enhanced durability and security.
• Highqualityspringsinlocksandlatches for lever handles provide enhanced durability and prevent lever handles from sagging.
• Radiusedfaceplatesandstrikeplatesare available to allow router preparation of doors and frames in the factory.
87
7125F60
71’ series locks
Verticallifttolock(L2L)morticelock.
• Theinternalleverhasadualfunction. Whenliftedup,theleversimultaneously throws the deadbolt and actuates the external indicator. Depressing the inside leverwithdrawsthedeadbolt,the latchbolt and resets the indicator. The external lever only operates latchbolt.
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7125FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN12209
• CE Marked 1121-CPD-AG0104
• CertifireapprovedCF347
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
Verticaleuroprofilecylindermorticeemergency lock.
• Insideleverhandlewithdrawsboth latchanddeadboltinoneaction,allowing escapeforfireandsafetyreasons,without compromising security as per ‘Secured by Design’.
Heavily sprung for lever handles•
InternalleverhandlerequiresaXX9052NT•half spindle
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7178FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF347
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
78
38
11
60
93
165
12
21.5
4632
35
20
12
235 872
38
11
60
93
1652021.5
46
8
6332
35
20
12
235 8
7178F60
3 X 8 1 0 G - B 0 3 0
7179F60 7181F60Verticaleuroprofilecylindermorticelock.
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7179FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN12209 3 X 8 1 0 G 4 B A 2 0
• CE Marked 1121-CPD-AG0060
• CertifireapprovedCF537
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
Verticaleuroprofilecylindermorticenightlatch.
Anti thrust bolt inhibits the latch from •being forced back when in the locked position
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7181FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF347
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
72
38
11
60
93
1652221.5
46
8
6332
35
20
12
235 8
80
38
11
6093
16521.5
46 633245
20
12
235
The 71 Series modular lock system is a full suite of heavy duty mortice locks for unsprung door furniture with many benefits.
• Modularcasesizesforeasierdoor preparation.
• 80mmand100mmbacksetoptionsare available. Contact Allgood for details.
• Lowfrictionlatchboltsgivesasmoother andquieterlockingactionandreduces damage to the door.
• Reversiblestrikeplates.
• Unique‘griptight’followerswhichprevent movement of the spindle within the follower,thuseliminatingloosenessof lever handles
• Solidstainlesssteellatchbolts,deadbolts and followers provide enhanced durability and security.
• Highqualityspringsinlocksandlatches for lever handles provide enhanced durability and prevent lever handles from sagging.
• Radiusedfaceplatesandstrikeplatesare available to allow router preparation of doors and frames in the factory.
88
7182F60
71’ series locks
Verticaleuroprofilecylindermorticelock.
• Lever handles on both sides will withdraw latchbolt.Ifdeadboltisprojected,the inside handle only will withdraw both bolts. Door then remains unlocked until manually re-locked by key from outside or turn from inside.
Supplied with split spindle•
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7182FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF347
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
Verticaleuroprofilecylindermorticedeadlock.
• Bolt through fixing holes for furniture
• Complete with strike plate. Specify 7186FS60 for lock with radius strike plate.
• IndependentlytestedtoBSEN12209
• CE Marked 1121-CPD-AG0059
• CertifireapprovedCF537
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
72
38
11
60
93
1652021.5
46
8
6332
35
20
12
2358
72
38
60
93
1652221.5
46
8
63
35
20
8235
7186F60
89
3 X 8 1 0 G 4 B A 0 0
7145N/13 7179MGRebate component kit to suit 71 series locks.
Finishes: SS • PS
Mortar guard to suit 71 series locks.
Finishes: SS • PS
36
247
27
150
36
16
238
24
11
2614
17
179
20
20
23
23
10
90
71’ series accessories
91
92
Verticaleuroprofilecylindermorticeapartment entrance lock.
• 3 part low friction latchbolt
• Anti-thrustbolt
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
•Suppliedwithsplitspindle
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN12209
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
Verticalmorticelatch.
• 3 part low friction latchbolt
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN12209
• CE Marked 1121-CPD-AG0055
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
9960 9962HDP
3 X 8 1 0 F - B 0 3 0
3 X 8 1 0 F 3 B A 3 0
36
134
37
56
203
19
72108
35–38
32
16 36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
Suitable for severe usage doors and where a higherdegreeofsecurityisrequired.Redlocksare available with a special bolt to allow use with approved 19mm electric release or monitor strikes and can be manufactured to incorporate microswitch monitors for alarm and access control.
93
Verticaleuroprofilecylindermorticedeadlock.
• Deadbolt incorporating hardened steel pins
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN12209
• CE Marked 1121-CPD-AG0055
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
Verticalmorticebathroomlock.
• 3 part low friction latchbolt
• Anti-thrustbolt
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearguarantee
Finishes: SS • PS
9964P 9968P
99‘ series redlocks
108
134
38
61
203
25
72108
32
12.536
72
16
134
37
10203
19
10
72108
35–38
32
16
12
9980PVerticaleuroprofilecylindermortice deadlocking nightlatch.
• 3 part low friction latchbolt (For holdback facility please specify 9981HBP)
• Anti-thrustbolt
Heavily sprung for lever handles•
Reversible latchbolt without opening •lockcase
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN12209
• CE Marked 1121-CPD-AG0058
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
3 X 8 1 0 F 3 K A 3 0
36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
94
9990HDPVerticaleuroprofilecylindermorticeescapenightlatch.
Reversible latchbolt without opening •lockcase
• ‘Alwaysfreetoescape’facilityasperSecured by Design proposals
• Suppliedwithsplitspindle
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
• 10yearguarantee
Finishes: SS • PS
36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
79941P1L/RVerticalsolenoidredlockwithoneleversolenoid controlled and the other lever free to escape.
•STATE HAND (EG. 79941P1L OR 79941P1R) - Left hand shown
• Suppliedwithsplitspindle
• 12 vDC fail secure
• Non-monitored
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearmechanicalguarantee, 1 year electrical guarantee
Finishes: SS • PS
79941P2L/RAs above but 24 vDC fail secure.
Finishes: SS • PS
36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
99’ series redlocks are suitable for severe usagedoorsthatrequireahigherdegreeofsecurity. All mortice and solenoid bolts come completewitha3partlowfrictionlatchbolt,anti-thrust bolt and are heavily sprung for lever handles.
95
99‘ series redlocks and solenoid redlocks
79945P5L/R 79946P5L/R79942P1L/RVerticalsolenoidredlockwithoneleversolenoid controlled and the other lever free to escape.
• STATE HAND (EG. 79945P5L OR 79945P5R) - Left hand shown
• Includesrequesttoexitfunction(RTE)
• Suppliedwithsplitspindle
• 12 vDC fail secure
• Twin-monitored
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearmechanicalguarantee, 1 year electrical guarantee
Finishes: SS • PS
Verticalsolenoidredlockwithoneleversolenoid controlled and the other lever free to escape.
• STATE HAND (EG. 79946P5L OR 79946P5R) - Left hand shown
• Includesrequesttoexitfunction(RTE)
• Suppliedwithsplitspindle
• 12 vDC fail safe
• Twin-monitored
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearmechanicalguarantee, 1 year electrical guarantee
Finishes: SS • PS
Verticalsolenoidredlockwithoneleversolenoid controlled and the other lever free to escape.
• STATE HAND (EG. 79942P1L OR 79942P1R) - Left hand shown
• Suppliedwithsplitspindle
• 12 vDC fail safe
• Non-monitored
• ULlistedandcomplieswithANSI115.1.SuitsstandardANSIpreparationformetaldoors
• IndependentlytestedtoBSEN179
• CE Marked 1121-CPD-ABB035
• CertifireapprovedCF623
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearmechanicalguarantee, 1 year electrical guarantee
Finishes: SS • PS
79942P2L/RAs above but 24 vDC fail safe.
Finishes: SS • PS
79946P6L/RAs above but 24 vDC fail safe.
Finishes: SS • PS
79945P6L/RAs above but 24 vDC fail secure.
Finishes: SS • PS
36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
36
72
16
134
37
10203
19
10
72108
35–38
32
16
12
96
7418A 7419AEuro profile double cylinder with key operation on both sides.
Patented 6 pin cylinder with hardened •drivers and body insert
Mushroom type drivers; make aligning •of the pins by a picking tool almost impossible
Available individually keyed or as part of a •masterkeysuitetocustomerrequirements
IndependentlytestedtoBSEN1303•
Incorporatedinsuccessfulfiretestand•assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
Variations(mm) V Wa 63 31.5 (standard)b 71 35.5c 80 40
Finishes: SN (XX7418NA) •PC
Euro profile double cylinder with key operationononesideanduniqueAllgoodturn on the other.
Patented 6 pin cylinder with hardened •drivers and body insert
Mushroom type drivers; make aligning •of the pins by a picking tool almost impossible
Available individually keyed or as part of a •masterkeysuitetocustomerrequirements
IndependentlytestedtoBSEN1303 •
Incorporatedinsuccessfulfiretestand•assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
Variations(mm) V Wa 63 31.5 (standard)b 71 35.5c 80 40
Finishes: SN (XX7419NA) •PC
1 6 0 1 0 C 6 21 6 0 1 0 C 6 2
33
1710 W
V
33
17
17
10 WV
25
97
7420A 7447APREuroprofilesinglecylinderwithuniqueAllgood turn only.
Patented 6 pin cylinder with hardened •drivers and body insert
IndependentlytestedtoBSEN1303•
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
Variations(mm) V Wa 41.5 31.5 (standard)b 45.5 35.5c 50 40
Finishes: SN (XX7447NAPR) •PC
Euro profile single cylinder with key operation on one side only.
Patented 6 pin cylinder with hardened •drivers and body insert
Mushroom type drivers; make aligning •of the pins by a picking tool almost impossible
Available individually keyed or as part of a •masterkeysuitetocustomerrequirements
IndependentlytestedtoBSEN1303•
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors and 120 minutes on metal doors
Variations(mm) V Wa 41.5 31.5 (standard)b 45.5 35.5c 50 40
Finishes: SN (XX7420NA) •PC
Cylinders
1 6 0 1 0 C 6 2
1 6 0 1 0 C 6 2
33
1710 W
V
33
1710 W25
V
17
7493AConstruction cylinder for use with euro profile locks during construction phase to prevent misuse and loss of keys.
Finish: XX
1817
33
7494Temporary cylinder and turn
Finish: XX
7495Temporary half cylinder
Finish: XX
98
7518MGMortar guard to suit 7518 strike plates.
Finish: XX
7518Cubicle mortice deadlock.
Deadbolt operated by snib from inside and •by indicator/release from outside
8mm follower•
Bolt through fixing holes•
Finishes: SS • PS
2
4926
75.557
810
89
1813
71
7519Claw bolt sliding door mortice deadlock.
Claw bolt operated by snib from inside and •indicator/release from outside
8mm follower•
Bolt through fixing holes •
Finishes: SS • PS
2
49
75.557
118
2513
71 2589
99
Cubicle deadlocks and roller catches
10772Adjustableheavydutyrollercatch.
Finishes: SS • PS
64 51 76 65
442222
63 53 70 60
17 14
10780Magnetic catch.
Finish: XX (White plastic)
8397Katkin access panel lock.
Flush fitting•
Special captive key can only be removed in •the locked position
Key can be used as a handle to lift out •access panels
• Incorporatedinsuccessfulfiretestandassessed to BS EN 1634-1 up to 60 minutes on timber doors
Finish: MA
77
61
8397AKatkin key with hole for chain.
Finish: MA
Options A
• 8397/13 13mm• 8397/25 25mm• 8397/45 45mm• 8397/54 54mm
16 14
19 A17
35
76
100
75580N 75581NMortice mini electromagnet shearlock with armature.
• 1000kgholdingforce
• BSEN1634-1for60minutesin54mmthick doors and 30 minutes in 44mm thick doors
• Foruseinsingleactiondoorapplications
• Suitablefortimberdoorandframe,metaldoor and frame or glass door with top rail and frame
• Dual12/24vDCvoltage
• Currentdraw@12/24v:currentsurgeof1.6 Amps reducing to 450mA at normal operation
120 minutes on metal doors•
Finish: XX
Surface mounted mini electromagnet shearlock with armature.
• 1000kgholdingforce
• BSEN1634-1for60minutesin54mmthick doors and 30 minutes in 44mm thick doors
• Foruseinsingleactiondoorapplications
• Suitablefortimberdoorandframe,metaldoor and frame or glass door with top rail and frame.
• Dual12/24vDCvoltage
• Currentdraw@12/24v:currentsurgeof1.6 Amps reducing to 450mA at normal operation
120 minutes on metal doors•
Finish: XX
163
163
30
25
30
25
3
3
163
163
30
25
30
25
3
3
200
204
30
30
30
30
200
204
30
30
30
30
101
163
163
30
25
30
25
3
3
200
204
30
30
30
30
75582N 75583NGlassdoorbrackettobeusedinconjunctionwith 75581 and 75583.
To be used in single action door •applications and on 10mm or 12mm thick doors
Onebracketrequiredforeachhousing.•i.e. one for door and one for transom if required
Adhesive not supplied. Recommended •adhesive is Loctite™ 317 adhesive with Loctite™ 734 activator
Finish: XX
Electromagnet shearlocks
Semi-concealed mini electromagnet shearlock with armature.
• Consistsofmorticedmagnethousingandsurface mount armature
• 1000kgholdingforce
• BSEN1634-1for60minutesin54mmthick doors and 30 minutes in 44mm thick doors
• Fordoorsinrecessedframesituations
• Suitablefortimberdoorandframe,metal door and frame and glass doors inconjunctionwiththe75582glassmounting bracket
• Dual12/24vDCvoltage
• Currentdraw@12/24v:currentsurgeof1.6 Amps reducing to 450mA at normal operation
Finish: XX
41 39
200 24
9
75580FPIntumescentpacktosuit75580Nshearlock
Finish: XX
102
75574Surface mounted electromagnet with armature.
• 300kgholdingforce
• Foruseinsingledoorapplications
• MBSmonitored
• Dual12/24vDCvoltage
• 250mAcurrentdraw@12v 125mAcurrentdraw@24v
• Forunitwithintegraldoorpositionswitchplease specify 75574SPS (longer armature applies)
Finish: XX
250
10
12140
28
52.531.5
103
75574DDouble surface mounted electromagnet with armature.
• 300kgholdingforce
• Foruseindoubledoorapplications
• MBSmonitored
• Dual12/24vDCvoltage
• 250mAcurrentdraw@12v 125mAcurrentdraw@24v
• Forunitwithintegraldoorpositionswitchplease specify 75574DPS (longer armature applies)
Finish: XX
Surface mounted electromagnets
500
12140
28
52.5
10
31.5
140
104
9320Surface mounted 3 point Touchbar bolt.
•Applicableforsingledoorsandpairsof rebateddoorswhenusedinconjunction with 9325 Touchbar latch (page 105)
• Tosuitdoorsupto2585mmhighand 860mm wide
• Suitablefortimber,aluminium,steeland PVCdoors
• Reversiblemechanism
• Canbeoperatedfromoutsidebyoptional 9326 external access device (page 105)
• IndependentlytestedtoBSEN1125
• CEmarked1520-CPD-2008
• Incorporatedinsuccessfulfiretestsand assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearguarantee
Finishes: SS (XX9320S) Silver (XX9320)
3 7 7 B 1 4 2 2 B A
20
53
23
6036
102
2650
23
32 56
840
32
105
Panic hardware
9325Surface mounted single point Touchbar latch.
•Applicableforsingledoorsandpairsof rebateddoorswhenusedinconjunction with 9320 Touchbar bolt (page 104)
• Tosuitdoorsupto2585mmhighand 860mm wide
• Suitablefortimber,aluminium,steeland PVCdoors
• Reversiblemechanism
• Canbeoperatedfromoutsidebyoptional 9326 external access device (page 105)
• IndependentlytestedtoBSEN1125
• CEmarked1520-CPD-2008
• Incorporatedinsuccessfulfiretestsand assessed to BS EN 1634-1 and BS 476 Pt 22 up to 90 minutes on timber doors
• 10yearguarantee
Finishes: SS (XX9325S) Silver (XX9325)
3 7 7 B 1 4 2 2 B A
9326External access device with half pair 3502 Modric lever handle.
• For use with 9320 and 9325 Touchbar bolt and latch respectively
• To suit timber doors up to 100mm thick
• Lever handle is engaged or disengaged by operating the cylinder
• Non-handed
• 7420Acylindermustbespecifiedseparately
• Can be integrated into a master key suite
Finishes: SS (XX9326S) Silver (XX9326)
9326EAs above but with electronic access control facility.Finishes: SS (XX9326SE) Silver (XX9326E)
137
19
37 25 52
4135127
166
37 25 52
4135127
19
32 56
53840
36
106
48800Lever action flushbolt.Finishes: SS • PS
19
38
203
11
15
4230
19
19
38
457
11
15
3827
20
48801Lever action flushbolt.Finishes: SS • PS
107
19
38
609
11
15
3827
20
19
38
914
11
15
3827
20
76015SCLever action flushbolt for metal doors. Finish: XX (Satin chrome)
48802Lever action flushbolt.Finishes: SS • PS
24
38
170
25
2450
57 25
12
Flushbolts
48803Lever action flushbolt.Finishes: SS • PS
7053Dirt excluding flushbolt socket.Finishes: SC • PC
20
15
32
44
7051Easy clean flushbolt socket.Finishes: SC • PC
19
4
62
108
Flushbolt accessories
48802FP48800FPIntumescentpackfor48800flushbolt.Finish: XX
48801FPIntumescentpackfor48801flushbolt.Finish: XX
48803FPIntumescentpackfor48803flushbolt.Finish: XX
109
Intumescentpackfor48802flushbolt.Finish: XX
110
9052NT9064T
9066T
9067T
Half spindle.
Finish: XX
Spindle with through bolts supplied for quadaxialhandles.Forusewithdoors32-55mm thick.
Finish: XX
As above but for use with doors 45-64mm thick.
Finish: XX
As above but for use with doors 65-90mm thick.Finish: XX
584
8
50
28
40 16
908
8
1008
8
1218
8
111
Mortice rigidiser for rigid fixing of lever and knob furniture. Suits 8mm spindles and 38mm centre fixing roses.
Finish: XX
474609055Indicatordrivespindleforusewith7125liftto lock (L2L) mortice lock.
Finish: XX
182
55
85
18
6 8 6
55
88
50
28
40 16
Spindles
79943/55Solid9.5mm/8mmdoublespindleforusewithsolenoidredlockswhencontrollinginsideandoutside levers.Finish: XX
Miscellaneous hardware
30041Spindle converter sleeve.Finish: XX
7.8
1.47.85
35
3
9030Construction levers for use with 8mm follower locks during construction phase to avoid loss and damage to finished ironmongery.Finish: XX
125
70
16
8
112
9561Quadaxial fixing kit comprising: •Piloted cutter •22mmø forstner bit •5/16” drill bit •Whizzerbit •T-bar hex wrenchFinish: XX
6.index
113
114
Alphabetical index
Armoured loopAutomatic door operatorsBackrest padBackrest railClaw bolt silding door deadlockCoat hooksConcealed door closersConstruction leversCubicle deadlockCubicle pivot setsCylinder pullCylindersDoc M grab railsDoor bumperDoor closersDoor stopsElectrohydraulic hold open overhead door closersElectromagnetic hold open devicesElectromagnetic shearlocksEmergency releaseEmergency release door stopEntrance pull handlesEscutcheonsFloor springsFloor spring accessoriesFlushboltsFlushbolts accessoriesFlush pullsHingesKatkin access panel lockKatkin keyKick plateLedge pullLever handlesLocksMagnetic catchMagnetic door holderMaxi roll dispenserMortar guard for 71’ series locksPanic hardwarePivotsPower transfer butt hingePull handlesPush padsPush platesRebate component kitRoller catchSelectors and staysSignageSlide arm overhead door closerSoap dispenserSpindle converter sleeveSpindlesSurface mounted electromagnetsSwing free overhead door closerTowel dispenserWaste binWC turn
.............................................................................84,85............................................................82,83
...................................................................................... 47....................................................................................... 47
......................................................... 98....................................................................................36,37
.............................................................74,75,76,77........................................................................... 112
................................................................................ 98............................................................................... 66
....................................................................................... 30.......................................................................................96,97
...........................................................................46,47...................................................................................... 35..................................................................................68,69
....................................................................................34,35............................. 72
..............................................80,81.......................................................100,101
............................................................................. 31............................................................. 67
......................................................................... 12....................................................................................... 30.....................................................................58,59,60,61
................................................................62,63..................................................................................106,107
..............................................................108,109....................................................................................38,39
..............................................................................54,55,56,57..................................................................... 99
.......................................................................................... 99........................................................................................... 33.......................................................................................... 39
................................................8,9,18,19,20,21,22,23..........................................................86,87,88,89,92,93,94,95
.................................................................................. 99......................................................................... 34
............................................................................. 51....................................................... 90
........................................................................104,105................................................................................................. 67
................................................................... 85...........................................................10,11,24,25,26,27
.......................................................... ................................ 84......................................................................................... 32
........................................................................ 90........................................................................................ 99
.......................................................................78,79.............................................................................40,41,42,43
....................................................70,71................................................................................... 48
................................................................... 112....................................................................................110,111
.............................................102,103........................................................ 73
.................................................................................. 50........................................................................................... 49
.............................................................................................. 31
115
Numerical index
1770BB17711771BB23012302230423052307230823092311300413005735023502D3503350435063506D3515352035303540354535503560357036233626364036433646474604880048800FP4880148801FP4880248802FP 4880348803FP621562506250FP62606546655065516555655765946594BB6594C6594CBB65976597BB6597C6597CBB6801G6801K6851
10218NP10772107801100413001130061301016000N16000TR16001N16002N16002P16281628BB16291629BB16381638BB16391639BB16481648BB16491649BB16681668BB16691669BB1714/101714/201716/101716/2017201720BB17211721BB17291729BB1729C1729CBB17301730BB17311731BB17401740BB17411741BB17451745BB17461746BB17501750BB17511751BB17601760BB17611761BB1770
............................................................................................ 57................................................................................................. 99................................................................................................. 99................................................................................................. 78................................................................................................. 66................................................................................................. 67................................................................................................. 31
.............................................................................................. 46............................................................................................. 46
.............................................................................................. 47
...............................................................................................47............................................................................................... 47
....................................................................................................10.............................................................................................. 10
................................................................................................... 10.............................................................................................. 10
................................................................................................... 11............................................................................................... 11
................................................................................................... 11.............................................................................................. 11
................................................................................................... 10............................................................................................... 10
................................................................................................... 10............................................................................................... 10
................................................................................................... 11............................................................................................... 11
................................................................................................... 11............................................................................................... 11.............................................................................................. 39.............................................................................................. 39.............................................................................................. 39.............................................................................................. 39
................................................................................................... 25............................................................................................... 25
....................................................................................................25................................................................................................25
................................................................................................... 12............................................................................................... 12
................................................................................................. 12 ............................................................................................ 12
.................................................................................................. 25 ............................................................................................... 25
................................................................................................... 25............................................................................................... 25
................................................................................................... 25............................................................................................... 25
................................................................................................... 25............................................................................................... 25
................................................................................................... 26............................................................................................... 26
................................................................................................... 26............................................................................................... 26
................................................................................................... 26............................................................................................... 26
................................................................................................... 26............................................................................................... 26
.................................................................................................. 27............................................................................................... 27
................................................................................................... 27............................................................................................... 27
................................................................................................... 27
............................................................................................... 27...................................................................................................27
............................................................................................... 27.................................................................................................. 34.................................................................................................. 34.................................................................................................. 34.................................................................................................. 35 .................................................................................................. 35.................................................................................................. 35.................................................................................................. 35.................................................................................................. 35................................................................................................112................................................................................................. 43
.................................................................................................. 18................................................................................................. 18
.................................................................................................. 18
...................................................................................................19................................................................................................. 19................................................................................................. 19
.................................................................................................. 19
.................................................................................................. 20
.................................................................................................. 20
.................................................................................................. 21
.................................................................................................. 21
.................................................................................................. 22
.................................................................................................. 22
.................................................................................................. 23
.................................................................................................. 8
.................................................................................................. 9
.................................................................................................. 9
.................................................................................................. 8
.................................................................................................. 9............................................................................................... 111................................................................................................106
........................................................................................... 109................................................................................................106
............................................................................................109................................................................................................107
...........................................................................................109............................................................................................... 107
........................................................................................... 109.................................................................................................. 38 .................................................................................................. 38
............................................................................................... 38.................................................................................................. 39.................................................................................................. 36.................................................................................................. 36...................................................................................................37...................................................................................................37.................................................................................................. 37 .................................................................................................. 24
............................................................................................... 24................................................................................................. 24
............................................................................................. 24.................................................................................................. 24
............................................................................................... 24................................................................................................. 24
............................................................................................ 24................................................................................................ 32
................................................................................................. 32.................................................................................................. 33
Numerical index
.............................................................................................. 56............................................................................................... 54............................................................................................... 57
............................................................................................. 54............................................................................................... 54
............................................................................................. 85
............................................................................................. 85............................................................................................... 57
............................................................................................ 54............................................................................................... 55............................................................................................... 57............................................................................................... 55............................................................................................... 57...............................................................................................55............................................................................................... 55.............................................................................................. 57
.................................................................................................. 99................................................................................................. 99
.................................................................................................. 40
.................................................................................................. 40
.................................................................................................. 41
.................................................................................................. 41
.................................................................................................. 41
.................................................................................................. 40
.................................................................................................. 42
.................................................................................................. 42
.................................................................................................. 43
.................................................................................................. 40
.................................................................................................. 41
.................................................................................................. 41
.................................................................................................. 41
................................................................................................ 112............................................................................................. 110
................................................................................................ 111............................................................................................... 110............................................................................................... 110............................................................................................... 110
............................................................................................... 75................................................................................................. 74
............................................................................................... 74................................................................................................. 75................................................................................................. 75
............................................................................................... 75................................................................................................. 76
............................................................................................... 76
............................................................................................... 77................................................................................................. 77
............................................................................................... 77
............................................................................................... 77................................................................................................. 79
.................................................................................................. 67............................................................................................... 69
................................................................................................ 68........................................................................................... 69
............................................................................................... 69.................................................................................................. 70.................................................................................................. 71................................................................................................ 104................................................................................................ 105................................................................................................ 105............................................................................................... 105
8026L/R8064CB8064FP8064RCB8066CB8066CT28066CT88066FP8066RCB8068CB8068FP8069CB8069FP8069MT8080CB8081CB83978397A843284338434843584368440844784488449845684578458845990309052NT90559064T9066T9067T9133FP9133S9133SE9134FP9134S9134SE9135D9135DE9135FP9136D9136DE9136FP9149G92509251FN9251/69251/6DC9256FN926792689320932593269326E
................................................................................................. 108
................................................................................................. 108............................................................................................. 86............................................................................................. 86............................................................................................. 87........................................................................................... 90
............................................................................................. 87
............................................................................................. 88
............................................................................................. 90
............................................................................................. 88
............................................................................................. 89
............................................................................................. 89................................................................................................. 84................................................................................................. 84................................................................................................. 84................................................................................................. 82................................................................................................. 82................................................................................................. 82................................................................................................. 82
.............................................................................................. 83
.............................................................................................. 83
.............................................................................................. 83
.............................................................................................. 83
.............................................................................................. 83
.............................................................................................. 83................................................................................................ 96................................................................................................ 96................................................................................................ 97
............................................................................................ 97................................................................................................ 97
................................................................................................... 97
................................................................................................... 97
................................................................................................... 98............................................................................................. 98
................................................................................................... 98................................................................................................102
............................................................................................ 103
............................................................................................ 100........................................................................................... 101
............................................................................................ 100
............................................................................................ 101
............................................................................................ 101........................................................................................... 107
.......................................................................................... 31
.......................................................................................... 31.................................................................................................. 31.................................................................................................. 31
...............................................................................................84
.............................................................................................. 85.................................................................................................. 30
........................................................................................ 94
........................................................................................ 94
........................................................................................ 95
........................................................................................ 95.......................................................................................... 111
........................................................................................ 95
........................................................................................ 95
........................................................................................ 95
........................................................................................ 95........................................................................................................ 30
.............................................................................................. 56
705170537104F607108F607125F607145N/137178F607179F607179MG7181F607182F607186F607192071921719267194171942719437194471961N71962N71963N71964N71965N71966N7418A7419A7420A7447APR7493A7494749575187518MG75197557475574D75580N75580FP75581N75582N75583N76015SC771Q2531771Q2532779Q786Q79052N79053N796Q79941P1L/R79941P2L/R79942P1L/R79942P2L/R79943/5579945P5L/R79945P6L/R79946P5L/R79946P6L/R88025L/R
116
Numerical index
93319331AK9331CB9331CC9331CT109331DBS9331DFP9331DTC9331SBS39331SBS59331SBS69331SFP9331SO9331SP9331STC39331STC59331STC693479347CB9347CC9347CT1094099409B94109531CB9531CC9531CT109531955195619571958198510985159852098530985409858099609962HDP9964P9968P9980P9990HDP
.................................................................................................. 58.............................................................................................. 65............................................................................................... 64............................................................................................... 65
.......................................................................................... 65............................................................................................. 63............................................................................................. 63............................................................................................. 63........................................................................................... 63........................................................................................... 62........................................................................................... 62
............................................................................................. 63............................................................................................... 59................................................................................................63
............................................................................................63
........................................................................................... 62
........................................................................................... 62................................................................................................... 60
............................................................................................... 64
............................................................................................... 65........................................................................................... 65
................................................................................................... 80................................................................................................. 81
................................................................................................... 81............................................................................................... 64............................................................................................... 65
........................................................................................... 65................................................................................................. 61
................................................................................................... 72
................................................................................................. 112
................................................................................................... 73
................................................................................................... 73................................................................................................. 48................................................................................................. 48................................................................................................. 49................................................................................................. 50................................................................................................. 51................................................................................................. 30
....................................................................................................92.............................................................................................92
................................................................................................. 93
................................................................................................. 93
................................................................................................. 93 ............................................................................................ 94
117
Allgood would like to thank Ergonom, Domus Tiles, PB Digital and Rob Wyatt Photography for their contributions to this brochure.
All information and details in this brochure are correct at time of going to press. However, Allgood plc reserves the right to change the product specifications without notice.
All dimensions are subject to production tolerances of ± 1mm.
Printed on Consort 155, a paper produced using an environmentally friendly, elemental chlorine-free bleaching process, whilst its fibre contains raw materials sourced from Forest Stewardship Council (FSC) sustainable sources.
0, 9, sembla, modric and 8 are registered trademarks.
© Allgood plc 2011FS 14846EMS 552362advancing architectural ironmongery
CI/SfB Xt7
Allgood plc297 Euston RoadLondon NW1 3AQTelephone: 020 7387 9951Facsimile: 020 7380 1232E-mail: [email protected]: www.allgood.co.uk
63-83 Brearley StreetBirmingham B19 3NTTelephone: 0121 359 4415Facsimile: 0121 359 5832E-mail: [email protected]: www.allgood.co.uk
28 Queen StreetManchester M2 5HXTelephone: 0161 834 6717Facsimile: 0161 834 6839E-mail: [email protected]: www.allgood.co.uk
The Wright Business Centre1 Lonmay Road, Glasgow G33 4ELTelephone: 0141 773 6298Facsimile: 0141 771 9569E-mail: [email protected]: www.allgood.co.uk
uk projects
Allgood Worldwide297 Euston RoadLondon NW1 3AQTelephone: +44 (0)20 7255 9330Facsimile: +44 (0)20 7383 7950E-mail: [email protected]: www.allgoodww.com
overseas projectsCommercial and public buildings
CI/SfBXt7
- comm
ercial and public buildings
