Broadband Fiber Catalog

7/29/2019 Broadband Fiber Catalog

1/73

For more information, call Customer Service at 800.982.1708 or 828.324.2200 Fax 828.328.3400 [email protected]

FIBERO

PTICCABLE

PRODUCTS

Fiber OpticCable Products

>Loose Tube

>Central Tube

>Fiber Drop

>Hybrids

>Tight Buffered

CommScope Fiber Optic Cable Products

p


2/73


Fiber Optic Cable

CommScope Fiber Optic Cable Products

Fiber Optic Cable Overview .................................................................................................... F3Fiber Optic Catalog Numbering Key .......................................................................................F7Cabled Fiber Specifications

Singlemode Fiber.................................................................................................................F8Multimode Fiber Specifications ........................................................................................... F11

Loose Tube Cable DesignsDry Stranded Loose Tube Armored ..................................................................................... F13Dry Stranded Loose Tube All-Dielectric ............................................................................... F14Dry Double Jacketed/Single Armored Stranded Loose Tube ................................................F15Arid-Core Stranded Loose Tube Armored .........................................................................F16Arid-Core Stranded Loose Tube All-Dielectric ....................................................................F17Arid-Core Double Jacketed/Single Armored Stranded Loose Tube .................................... F18Arid-Core Mini Stranded Loose Tube Armored .................................................................. F19Arid-Core Mini Stranded Loose Tube Non-Armored .......................................................... F20

LSZH Arid-Core Mini Stranded Loose Tube Armored ......................................................... F21LSZH Arid-Core Mini Stranded Loose Tube Non-Armored .................................................F22High Density Stranded Loose Tube .................................................................................... F23ADSS Short Span Stranded Loose Tube ..............................................................................F24Self-Supporting Figure-8 Dry Stranded Loose Tube Armored (0.250in) ............................... F25Self-Supporting Figure-8 Dry Stranded Loose Tube Non-Armored (0.250in) ....................... F26Self-Supporting Figure-8 Arid-CoreDry Stranded Loose Tube Armored (0.250in) ..............F27Self-Supporting Figure-8 Arid-Core Dry Stranded Loose Tube Non-Armored (0.250in) ...... F28Self-Supporting Figure-8 Dry Stranded Loose Tube Armored (0.188in) ............................... F29Self-Supporting Figure-8 Dry Stranded Loose Tube Non-Armored (0.188in) ....................... F30Self-Supporting Figure-8 Dry Stranded Loose Tube Armored (0.109in) ............................... F31Self-Supporting Figure-8 Dry Stranded Loose Tube Non-Armored (0.109in) ....................... F32Riser-Rated, Indoor/Outdoor Dry Stranded Loose Tube All-Dielectric ................................... F33Plenum-Rated, Indoor/Outdoor Dry Stranded Loose Tube All-Dielectric .............................. F34

Riser-Rated, Indoor/Outdoor Dry Stranded Loose Tube with Interlocking Armor .................. F35Plenum-Rated, Indoor/Outdoor Dry Stranded Loose Tube with Interlocking Armor .............. F36Central Tube Cable Designs

Central Tube Armored ....................................................................................................... F37Central Tube All-Dielectric ..................................................................................................F37Riser-Rated, Indoor/Outdoor Central Tube All-Dielectric ..................................................... F38

Fiber Drop Cable DesignsDrop Armored ...................................................................................................................F39Drop All-Dielectric .............................................................................................................F40Messengered Drop (0.109in) ............................................................................................. F41Messengered Drop (0.083in) ............................................................................................. F42Figure-8 Mini-Drop (Solid Messenger) ................................................................................ F43Flat Drop ...........................................................................................................................F44Toneable Flat Drop ............................................................................................................ F45LSZH, Indoor/Outdoor Central Tube All-Dielectric ..............................................................F46

ConQuest Fiber Optic Products ............................................................................................ F47Hybrid Cable Designs

Fiber/Coax Designs ...........................................................................................................F51Fiber/Twisted Pair Designs ..................................................................................................F53Fiber/Tone Wire Designs ....................................................................................................F55

Tight Buffered Cable DesignsRiser-Rated, Indoor/Outdoor LSZH Distribution ..................................................................F58Riser-Rated, Indoor/Outdoor LSZH Cordage ...................................................................... F59Riser-Rated, Indoor Distribution .......................................................................................... F60Riser-Rated, Indoor Cordage .............................................................................................. F61Plenum Rated, Indoor Distribution ...................................................................................... F62Plenum-Rated, Indoor Cordage ......................................................................................... F63

Packaging and Shipping Information ..................................................................................... F64


3/73


CommScope Fiber Optic Cable ProductsProven Quality and Performance

The Cable Industrys Fiber SupplierTM

Better fiber equals better fiber optic cable. CommScope

provides key optical and geometrical features in its standard

singlemode fiber for fusion splice compatibility with other fiber

manufacturers and legacy fiber. LightScope ZWP

singlemode

optical fiber cable continues a CommScope tradition of being

a leader in manufacturing innovative and performance-

enhanced products for the cable industry. LightScope ZWP

optical fiber cable makes available 30% more usable

transmission spectrum, which can be used for return path,

enhanced video services such as video on demand (VOD)

or Dedicated Wavelength Services for business or other

demanding applications.

CommScope has developed key families of fiber optic cables

specifically to be used throughout the HFC communication

hierarchy as well as an offering of fiber optic components

including connectors and other passive devices that are

commonly required in broadband infrastructure.

Outside Plant Cables for Standard

and Rugged Environments

For direct buried, underground conduit and aerial installations,

CommScope offers several designs, which include a variety of

loose tube cables. Design options include Drop Armored, a

smaller, lighter weight Central Tube cable construction; Central

Tube, Flat Drop, and Stranded Loose Tube cables. Craft

friendly product solutions are a foremost requirement in todays

fast paced world. CommScope engineers are committed

to offering evolutionary improvements and easy-to-handleconstructions in our fiber product offering. For example, our

Dry Loose Tube family of gel-free stranded loose tube cables

uses all-dry water blocking technology and reduced diameter

buffer tubes. The design is completely gel-free, yet provides

full water blocking protection for outside plant applications.

Any of these cables may be factory-installed in a variety of

CommScopes ConQuestpremium high density polyethylene

conduit including Toneable ConduitTM

a patented location and

damage prevention solution.

Indoor/Outdoor Cables for Strength and Safety-

Including Low-Smoke Zero-Halogen (LSZH) Types

CommScopes design for these cables offer construction and

jacketing suitable for outside usage yet comply with UL and

CSA riser (OFNR) or plenum (OFNP) flame standards. This

design allows you to run cable through the building entrance

without having to terminate and splice different cables

together which results in significant savings in time and labor.

Cable types include dielectric central tube designs, dielectric

stranded loose tube cables and Triathlon

, a specially designed

low-smoke/zero halogen distribution and cordage cable

construction.

Premise Cables for Safety and Performance

CommScopes premises cables are designed to handle the

unique stresses of indoor applications. Design options include

riser and plenum-rated distribution and cordage cables.

2

p

3


4/73


Test Reports -A Higher Standard for Higher Speeds

Every reel of CommScope fiber optic cable is subjected to

stringent testing throughout the entire manufacturing process.

Our state-of-the-art process controls and testing systems ensure

that every meter of CommScope cable consistently meets orexceeds our high standards.

To prove that our fiber optic cables

exceed industry standards, we go to the

extra step of attaching an individual

cable test report to each reel. In addition

to the paper copy of the test reports, we

also offer WebTrak, a web program

that puts cabling factory results on-line

for all of our fiber optic cables. It is

our understanding that sometimes this

critical test information is misplaced ornever makes it to the end-user. With WebTrak, it is easy to find

that important paperwork; CommScopes web interface puts

factory testing reports for individual cables on-line for 24 hour

immediate access.

The patented and trademarked WebTrak program resides

on our commscope.com website for quick access from any

computer. For access to the electronic test reports, all the

installers need is the 11

digit serial number printed

on the cable jacket and a

footage or meter markerfor reference. Installers can then enter this number on the

WebTrak portion of the CommScope website and pull up the

cables factory test results from anywhere in the world at any

time of the day or night.

Provides documentation of CommScope fiber optic cable

performance, allowing a convenient way to track a reel of

cable and verify performance.

Provides an alternative to managing paper reports. With

WebTrak, you can get all the information you need on-line.

Provides quick verifications to ensure the product meets

or exceeds performance requirements, should there be aperformance issue in the field.

Provides easy 24/7 access via the internet.

WebTrak is just one more example of how CommScope listens

to our customers and delivers. You get proof-positive that

the cable you purchase will perform to the level you require.

Remember, a network is only as good as the cable that connects

it. Specify the cables that make networks work fiber optic

cables from CommScope.

Request a FREE Broadband

Applications & Construction Library

CommScopes Broadband

Applications & Construction

Library includes a 5-piece

set of valuable reference

manuals plus a DVD

containing essential

training videos on topics

such as connectorization,

expansion loop

formation and fiber optic splicing. These tools

teach you how to protect the integrity of your broadband

plant while lowering operating/installation costs. From

construction and installation practices, to performance and

testing of cable CommScope Construction Manuals are

simply a must-have for anyone upgrading or maintaining

broadband networks. Download a PDF version at our

website: http://www.commscope.com or request a set by

phone at 1-800-982-1708.

CommScopes

Broadband Resource CenterTM

This repository of experience, knowledge, services and

tools is provided to CommScope customers to assist

installers, technicians, engineers, designers and managers

of broadband service providers. Tools in various media

and formats include: SpanMaster software for cable sag

and tension calculations; center conductor sizing guides;

attenuation slide rules; and call center spec assistance and

review. Call us at 1-866-333-3BRC (3272) or e-mail

[email protected] for answers to

product questions or issues related to any

CommScope broadband product.


5/73

CommScope Outside Plant CablesRobust Dielectric and Armored Constructions

All CommScope Outside Plant (OSP) cables are

designed and manufactured to provide outstanding

mechanical and optical performance. This cable family

includes a loose tube construction to provide multiple

levels of protection for the fiber strands. We manufacture

all loose tube cables with appropriate Excess FiberLength (EFL) to ensure, that when properly installed, the

fiber strands will remain strain-free, which is essential to

good optical performance and longevity. Our heavy-

duty products are engineered to withstand the rigors of

environmental extremes.

There are many cable choices when considering

applications that require environmental protection

and provide for network diversity. CommScope cable

surpasses requirements in the aerial, underground and

conduit applications. We offer self-support cable for

aerial environments and cable-in-conduit or armoredcables for extra protection in burial applications.

CommScope manufactures cables that are lightweight,

flexible and especially suited for aerial cable installations.

Our loose tube cables are available in armored and all-

dielectric versions.

OSP Fiber Optic Cable Design Options Include:

Drop - a small, lightweight Central Tube cable designed for

use when space is at a minimum; features a robust PBT

buffer tube and is available in fiber counts up to 12

Central Tube - armored and dielectric construction forpoint-to-point installations in counts up to 48 arranged in

easy-to-handle color-coded subunits of 12 fiber each

Stranded Loose Tube - for direct buried, underground

conduit and aerial installations; design variations range

from all-dielectric to armored constructions with up to

576 fibers

Dry Loose TubeCraft friendly product solutions are a foremost requirement

in todays fast paced world. CommScope engineers are

committed to offering evolutionary improvements and easy-to-handle constructions in our fiber product offering. The

latest example is our new Dry Loose Tube cable design. This

family of gel-free stranded loose tube cables uses all-dry water

blocking technology and reduced diameter buffer tubes. The

design is completely gel-free, yet provides full water blocking

protection for outside plant applications and meets all of the

requirements for outside plant cable.

Arid-Core Moisture Barrier

CommScope defeats moisture with a unique multi-level

approach. In addition to tough outer jacketing, we employArid-Core, a super-absorbent polymer technology. Arid-Core

is applied between the jacket and the buffer tubes in stranded

loose tube cables, and coats the central tubes of drop armored

and central tube cables. When moisture meets Arid-Core,

the polymer swells to prevent moisture migration - it acts as a

mechanical block to prevent further water penetration.

Drop CablesCommScopes Drop family of cables offer craft friendly access

product solutions for Fiber to the Premise (FTTP) applications

designed for use as systems develop commercial services andexpand networks to non-traditional customers. The design of

drop cables compliments the needs often found for the last

mile of your fiber network. Drop cables offer a compact,

flexible and cost-efficient configuration that provides low-loss

performance when twelve fibers or less are needed. Drop

cables are commonly used to branch from the main cable

route to outlying distribution points or the premise. All drop

cables can be pre-installed in conduit.CommScope OSP fiber optic cables are designed to meet or exceed therequirements of Telcordia, EIA/TIA, REA/RUS, IEC and RUS industry standards.

2For more information, call Customer Service at 800.982.1708 or 828.324.2200 Fax 828.328.3400 [email protected]

p

5


6/73

Stranded Loose TubeAvailable in All-Dielectric and Armored designs with up

to 576 fibers

For Direct Buried, Underground Conduit, and Aerialinstallations

Available in ADSS and Figure-8 constructions

Hybrid configurations that include coax or copperconductors are available

Mini-Diameter Stranded Loose TubeSmaller, lightweight cable design utilizing 2.0mm buffer

tubes

Available with up to 144 fibers in Armored, All-Dielectric and LSZH designs

Improved ease of handling and better utilization ofduct space

CommScope Cable Constructions


DropCost effective, low fiber count cables for outside plant

applications

Wide variety of flexible, versatile, and craft-friendlyproducts available

For Direct Buried, Underground Conduit, and AerialDrop applications

Small, lightweight cable designs developed for ease ofinstallation

Messenger Figure-8Multiple messenger size options for increased versatility

in designs with up to 60 fibers

Allows easy, one-step installation resulting in costsavings

Armored and Non-Armored versions with .250

messenger available with up to 288 fibers

Central TubeAvailable in All-Dielectric and Armored designs with up

to 48 fibers

Effective solution for point-to-point installations

Robust constructions offer excellent fiber protection

Single buffer tube saves time and reduces terminationcosts

Indoor/Outdoor Stranded Loose TubeRiser, Plenum, and Low Smoke Zero Halogen (LSZH)

constructions

Eliminates the need for a splice point when entering abuilding

Tough enough for the OSP environment and flamerated for indoor use

Hybrid Cables

Flexibility and options for future growth in a single

cost-effective cable run

Easier material management

Capable of voice transmission, cable location, and

site powering

Premise Cables

Complete line of Riser and Plenum rated cables for

indoor use

Engineered to provide excellent mechanical and optical

performance

FiberGuard Aluminum Interlocking Armor available


7/73

p


Fiber Optic Catalog Numbering KeySteps to Building the Catalog Number for the Cable You Need!

CABLE STYLE (Position 1)

D ......Dry

O .....Outdoor (Arid Core Standard)

S .......Self-Supporting (ADSS)

M .....Messenger

P .......Plenum

R.......Riser

Z ......Zero Halogen

FIBER COUNT* (Positions 2, 3, & 4)

Total Fiber Count (in increments of two)

*Substitute for XXX variable in catalog number.

CABLE MARKING (Position 9)

F .........Jacket Sequentially Marked in Feet (standard)

M ........Jacket Sequentially Marked in Meters

X .........Custom Print Required

FIBER TYPE (Positions 7 & 8)

Singlemode

8W.........LightScope ZWP

Dispersion-Unshifted,Matched-Clad, Singlemode Fiber

8F ...........Bend Insensitive Singlemode Fiber

8T ...........LightScope NZDTM

Non-Zero Dispersion-Shifted, Singlemode Fiber

Multimode6F...........62.5m, FDDI Grade, Multimode Fiber5M .........LazrSPEED 150, 50m, Multimode FiberCM .........Composite (Singlemode & Multimode)

HybridsHY..........Fiber/Copper

*XY variable in catalog number

CONSTRUCTION (Positions 5 & 6)

Loose Tube Cables

LA ..........Stranded Loose Tube Armored

LN .........Stranded Loose Tube Non-Armored

L2 ..........Stranded Loose Tube Double Jacketed,Single Armored

LZ.......... Indoor/Outdoor Stranded Loose Tube,Aluminum Interlocking Armor

DA .........Drop Armored

DN ........Drop Non-Armored

DF .........Flat DropMN........Mini-Drop Non-Armored

CA .........Central Tube Armored

CN........Central Tube Non-Armored, All-Dielectric

Tight Buffered Cables

DS .........Distribution IC .......Interconnect

SP ..........Simplex ZC......Zipcord

CABLE CONSTRUCTION SPECIFICS (Position 10)

Foroutdoorandindoor/outdoorloosetubecables,this value indicates the fiber content per subunit:01-12.......... Fiber Count Per Subunit

Forindoordistributioncables,thisvalueindicatesadditional information pertaining to the cableconstruction:SU ...............Single Unit ConstructionMU ..............Multi-Unit Construction

Forcordagecables,thisvalueindicatestheoutside diameter:16 ............... 1.6mm Jacket Outer Diameter25 ............... 2.5mm Jacket Outer Diameter29 ...............2.9mm Jacket Outer Diameter

COLOR FIELD (Positions 11 & 12)

Foroutdoorcables,thisfielddesignatesthetracer/stripe requirements:

NS.................No Stripe (Std) WH....................White

BL ..................Blue YL ......................Yellow

OR ................Orange VI.......................VioletGR ................Green

Forindoor/outdoorcables,thisfielddesignatesthe jacket color:

BK .................Black

Forindoorcables,thisfielddesignatesjacketcolor:

OR .........Orange -62.5m multimode and composite cablesYL ..........Yellow - singlemode cables

AQ.........Aqua - 50m multimode LazrSPEED

cables

Note: Non-standard jacket colors are available. (minimum order required)Please contact your Customer Service Representative for additional information.

ZZ variable in catalog number

NOTES

When Positions 7 & 8 are CM (composite cables),positions 14-23 are required.

Positions 14 & 15............. Singlemode fiber type

Positions 16 - 18 .............Singlemode fiber count(aaa variable in the catalog number)

Positions 19 & 20............. Multimode fiber type

Positions 21 - 23 .............. Multimode fiber count(bbb variable in the catalog number)

Please note that positions 13 and above are often used to differentiate similarcable constructions. Please see the individual product pages for additionalpart number details.

CommScopeCatalog Number

Position 1 2 3 4 5 6 7 8 9 10 11 12

7


8/73


Type 8W Singlemode Fiber SpecificationsAvailable in All CommScope Cable Types

Physical Characteristics

Cladding Diameter 125 0.7 m

Core/Clad Offset < 0.5 m

Coating Diameter (uncolored) 245 10 m

Coating Diameter (colored) 254 7 m

Coating/Cladding Concentricity Error, maximum 12 m

Clad Non-Circularity < 1%

Mechanical Characteristics

Proof Test 100 kpsi (.69 Gpa)

Coating Strip Force 0.3 - 2.0 lbf (1.3 - 8.9 N)

Fiber Curl > 4 m

Dynamic Fatigue Parameter > 20 nd

Macrobend 100 turns @ 50 mm mandrel

1310/1550 nm 0.05 dB maximum

Macrobend 100 turns @ 60 mm mandrel

1625nm 0.05 dB maximum

Macrobend 1 turn @ 32 mm mandrel

1550 nm 0.05 dB maximum

Optical Characteristics, Wavelength Specific

Attenuation, Loose Tube Cable

1310 nm 0.34 dB/km

1385 nm 0.31 dB/km

1550 nm 0.22 dB/km

Attenuation, Tight Buffer Cable

1310 nm 0.50 dB/km

1385 nm 0.50 dB/km

1550 nm 0.50 db/km

Mode Field Diameter1310 nm 9.2 + 0.3 m

1385 nm 9.6 + 0.6 m

1550 nm 10.4 + 0.5 m

Group Refractive Index

1310 nm 1.467

1385 nm 1.468

1550 nm 1.468

Dispersion

1310 nm 3.2 ps/(nm-km) from 1285 to 1330 nm

1550 nm 18 ps/(nm-km)

Optical Characteristics, General

Point Defects, maximum 0.10 dBCutoff Wavelength < 1260 nm

Zero Dispersion Wavelength 1302 - 1322 nm

Zero Dispersion Slope 0.090 ps/(km-nm-nm)

Polarization Mode Dispersion Link Design Value < 0.06 ps/sqrt(km)

Environmental Characteristics

Temperature Dependence -60C to +85C < 0.05 dB

Temperature Humidity Cycling -10C to +85C up to 95% RH < 0.05 dB

Water Immersion, 23 + 2C < 0.05 dB

Heat Aging, 85 + 2C < 0.05 dB

Zero Water Peak: Dispersion-Unshifted, Matched-Clad Singlemode FiberStandards Compliance: ITU-T G.652.D

Specifications are subject to change without notice.


9/73

p


9











Fiber Curl > 4 m


Macrobend 100 turns @ 50 mm diameter (maximum)

1550 nm 0.01 dB

1625 nm 0.05 dB

Macrobend 10 turns @ 30 mm diameter (maximum)

1550 nm 0.2 dB

1625 nm 0.5 dBMacrobend 1 turn @ 30 mm diameter (maximum)

1550 nm 0.02.dB

Macrobend 1 turn @ 20 mm diameter (maximum)

1550 nm 0.2 dB



1310 nm 0.36 dB/km

1385 0.33 dB/km

1550 nm 0.25 dB/km


1310 nm 0.50 dB/km

1385 nm 0.50 dB/km

1550 nm 0.50 db/km

Mode Field Diameter

1310 nm 8.9 + 0.4 m

1550 nm 10.0 + 0.5 m


1310 nm 1.467

1385 nm 1.467

1550 nm 1.468

Dispersion

1310 nm 3.5 ps/(nm-km) from 1285 to 1330 nm

1550 nm 18 ps/(nm-km)


Point Defects, maximum 0.10 dBCutoff Wavelength < 1260 nm









Dispersion-Unshifted, Matched-Clad Singlemode FiberStandards Compliance: ITU-T G.657.A

Bend Insensitive Type 8F Singlemode Fiber SpecificationsAvailable in All CommScope Cable Types



10/73


Non-Zero Dispersion Shifted Singlemode FiberStandards Compliance: ITU-T G.655.C, D

LightScope NZDTM Type 8T Singlemode Fiber SpecificationsAvailable in CommScope Outside Plant Cable Types







Clad Non-Circularity < 0.7%




Fiber Curl > 4 m


Macrobend 100 turns @ 75mm mandrel

1550 and 1625 nm 0.05 dB maximum

Macrobend 1 turn @ 32mm mandrel

1550 and 1625nm 0.50 dB maximum



1310 nm 0.45 dB/km

1550 nm 0.25 dB/km

1625 nm 0.34 dB/km

Mode Field Diameter

1550 nm 8.4 + 0.6 m

1625 nm 8.9 + 0.6 m


1310 nm 1.471

1550 nm 1.470

1625 nm 1.470

Dispersion

1310 nm -8 ps/(nm-km) (typical)

1550 nm 2.6 to 6 ps/(nm-km) from 1530 - 1565 nm

1625 nm 4.0 to 8.9 ps/(nm-km) from 1565 - 1625 nm


Maximum Attenuation at 1385 nm 0.45 dB/km

Point Defects, maximum 0.10 dB

Cutoff Wavelength < 1260 nm

Dispersion Slope < 0.05 ps/(km-nm-nm) at 1550 nm









11/73

p


62.5 micron, FDDI Grade Multimode FiberStandards Compliance: TIA 492AAAA (OM1)

Type 6F Multimode Fiber SpecificationsAvailable in All CommScope Cable Types


Core Diameter 62.5 2.5 m


Core/Clad Offset < 1.0 mCoating Diameter (uncolored) 245 10 m









850 nm and 1300 nm 0.50 dB maximum



850 nm 3.0 dB/km

1300 nm 1.0 dB/km


850 nm 3.4 dB/km

1300 nm 1.0 db/km

Bandwidth, OFL (Over-Filled Launch)

850 nm 220 MHz - km

1300 nm 500 MHz - km


850 nm 1.496

1300 nm 1.491

1 GB Ethernet Distance

850 nm 300 m

1300 nm 550 m


Numerical Aperature 0.275 0.015



Zero Dispersion Slope, maximum 0.097 ps/(km-nm-nm)








12/73


LazrSPEED 150, 50 micron Multimode FiberStandards Compliance: Exceeds TIA 492AAAB (OM2+)

LazrSPEED 150 Type 5M Multimode Fiber SpecificationsAvailable in All CommScope Cable Types


Core Diameter 50.0 2.5 m












850 nm and 1300 nm 0.50 dB maximum

Optical Characteristics, Wavelength SpecificAttenuation, Loose Tube Cable

850 nm 3.0 dB/km

1300 nm 1.0 dB/km


850 nm 3.0 dB/km

1300 nm 1.0 db/km

Bandwidth, OFL

850 nm 700 MHz - km

1300 nm 500 MHz - km

Bandwidth, Laser

850 nm 950 MHz - km

1300 nm 500 MHz - km

Differential Mode Delay850 nm 0.70 ps/m

1300 nm 0.88 ps/m


850 nm 1.483

1300 nm 1.479


850 nm 800 m

1300 nm 600 m


850 nm 150 m


Numerical Aperature 0.200 + 0.015





Temperature Dependence -60C to +85C 0.10 dB

Temperature Humidity Cycling -10C to 85C up to 95% RH 0.10 dB

Water Immersion, 23 + 2C 0.20 dB

Heat Aging, 85 + 2C 0.20 dB



13/73

p


Environmental Specifications

Installation Temperature -22 to +158F (-30 to +70C)

Operating Temperature -40 to +158F (-40 to +70C)

Storage Temperature -40 to +167F (-40 to +75C)

Mechanical Test SpecificationsTest Requirement Test Method

Compression 250 lbf/in (44 N/mm) FOTP-41; IEC 60794-1-2; Sec. 7

Flex 35 Cycles FOTP-24; IEC 60794-1-2; Sec. 10

Impact Cable Diameter Dependant FOTP-25; IEC 60794-1-2; Sec. 8

Strain See long & short term tensile loads FOTP-33; IEC 60794-1-2; Sec. 5Twist 10 Cycles FOTP-85; IEC 60794-1-2; Sec. 11

Water Penetration 24 Hours FOTP-82; IEC 60794-1-2; Sec. 24

Environmental Test SpecificationsTest Requirement Test Method

Cable Freeze 28 F (-2 C) FOTP-98

Drip N/A N/A

Heat Age -40 to +185F (-40 to +85C) N/A

Low High Bend -22 to +140F (-30 to +60C) FOTP-28; IEC 60794-1-2; Sec. 28

Temperature Cycle -40 to +158F (-40 to +70C) 24 Hours

Gel-Free Stranded Loose Tube Armored Cable(72 Fiber Version Shown)

PE Outer Jacket

Steel Tape Armoring

Water Swellable Tape

2.5mm Gel-Free Buffer Tubes

Dielectric Strength Member

Strength Elements

250 Micron Fibers

Binder

Ripcord (2)

Product Type/ CatalogSubunits

Outer Diameter Minimum Bend Radius Maximum Tensile Load WeightFiber Count Number inch/mm Loaded Unloaded Short Term Long Term lbs/ kg/

inch/cm inch/cm lbs/newtons lbs/newtons kft km

Single Jacket/Single Armor D-XXX-LA-XY-F12NS 5 0.45/11.5 6.8/17.3 4.5/11.5 607/2700 180/800 78 116

2 - 60 Fibers

62 - 72 Fibers D-XXX-LA-XY-F12NS 6 0.47/12.0 7.1/18.0 4.7/12.0 607/2700 180/800 82 123






Singlemode/Multimode D-XXX-LA-CM-F12NS/AAaaa/BBbbb Refer to above specifications. Composite (4-288 Fibers)

Outside Plant Gel-Free Stranded Loose Tube CableArmored

Jacket/Armor Combinations for Buried/Underground/Aerial Applications 100% dry stranded loose tube cable reduces cable prep time and keeps gel from getting on clothes, workbenches, or splicing equipment

Flexible 2.5mm buffer tubes improve kink resistance, reduce bend sensitivity, and facilitate route management in closures

Medium Density Polyethylene (MDPE) jacket is rugged, durable, and easy to strip

Corrugated steel tape armor is strong yet flexible providing additional crush and rodent protection

Rural Development Utilities Program (RDUP) listed, a program administered by the Rural Utilities Service (RUS)

Specifications are subject to change without notice.CommScope Optical Cables are qualified under the general guidelines to the following specifications:

ANSI/ICEA S-87-640-2006; Telcordia GR-20-CORE Issue 3; EN 187105; RUS/RDUP 7 CFR 1755.902 RDTelecommunications Program Listed.

Variables in the Catalog Number: XXX = Total Fiber Count XY = Fiber Grade 8WLightScope ZWP

Dispersion-Unshifted,Matched-Clad Singlemode Fiber

8T LightScope NZDTM

Non-Zero Dispersion-Shifted Singlemode Fiber

For Composites Only: aaa is replaced with singlemode fiber count bbb is replaced by multimode fiber count AAis replaced with singlemode type BB is replaced by multimode type

Buffer Tubes/Fiber identification colors: 1/Blue, 2/Orange, 3/Green, 4/Brown, 5/Slate, 6/White, 7/Red, 8/Black, 9/Yellow, 10/Violet, 11/Rose, 12/AquaBuffer Tubes 13-24 repeat color sequence with tracer stripe

6F 62.5m, FDDI Grade Multimode Fiber

5M LazrSPEED

150, 50m, Multimode Fiber

3


14/73


Gel-Free Stranded Loose TubeNon-Armored, All-Dielectric Cable(72 Fiber Version Shown)

PE Outer Jacket




Strength Elements

250 Micron Fibers

Binder

Ripcord (1)

Binder

For Buried/Underground/Aerial Applications

100% dry stranded loose tube cable reduces cable prep time and keeps gel from getting on clothes, workbenches, or splicing equipment

Lightweight, small design is installer-preferred due to ease of handling








Single Jacket/2 - 60 Fibers D-XXX-LN-XY-F12NS 5 0.40/10.2 6.0/15.3 4.0/10.2 607/2700 180/800 44 66

62 - 72 Fibers D-XXX-LN-XY-F12NS 6 0.42/10.5 6.3/15.8 4.2/10.5 607/2700 180/800 48 71






Singlemode/Multimode D-XXX-LN-CM-F12NS/AAaaa/BBbbb Refer to above specifications. Composite (4-288 Fibers)

Outside Plant Gel-Free Stranded Loose Tube CableNon-Armored, All-Dielectric



8T LightScope NZDTM



Buffer Tubes/Fiber identification colors: 1/Blue, 2/Orange, 3/Green, 4/Brown, 5/Slate, 6/White, 7/Red, 8/Black, 9/Yellow, 10/Violet, 11/Rose, 12/Aqua

Buffer Tubes 13-24 repeat color sequence with tracer stripe


5M LazrSPEED














Drip N/A N/A




CommScope Optical Cables are qualified under the general guidelines to the following specifications:ANSI/ICEA S-87-640-2006; Telcordia GR-20-CORE Issue 3; EN 187105; RUS/RDUP 7 CFR 1755.902 RDTelecommunications Program Listed.


15/73

p


Gel-Free Stranded Loose Tube Armored CableDouble Jacketed, Single Armored(72 Fiber Version Shown)

PE Outer Jacket

Steel Tape Armoring

Water Blocking Tape


PE Inner Jacket


Strength Elements250 Micron Fibers

Binder

Ripcord (2)

Double Jacket for Buried/Underground/Aerial Applications

100% dry stranded loose tube cable reduces cable prep time and keeps gel from getting on clothes, workbenches, or splicing equipment

Corrugated steel tape is strong yet flexible, providing additional crush and rodent protection







Double Jacket/Single Armor D-XXX-L2-XY-F12NS 5 0.59/15.0 8.9/22.5 5.9/15.0 607/2700 180/800 129 192

2 - 60 Fibers

62 - 72 Fibers D-XXX-L2-XY-F12NS 6 0.61/15.4 9.1/23.1 6.1/15.4 607/2700 180/800 134 200






Singlemode/Multimode D-XXX-L2-CM-F12NS/AAaaa/BBbbb Refer to above specifications. Composite (4-288 Fibers)

Outside Plant Gel-Free Stranded Loose Tube CableDouble Jacketed, Single Armored














Drip N/A N/A




CommScope Optical Cables are qualified under the general guidelines to the following specifications:ANSI/ICEA S-87-640-2006; Telcordia GR-20-CORE Issue 3; EN 187105; RUS/RDUP 7 CFR 1755.902 RDTelecommunications Program Listed.



8T LightScope NZDTM





5M LazrSPEED


5


16/73


Arid-Core Stranded Loose Tube Armored Cable(72 Fiber Version Shown)

PE Outer Jacket

Steel Tape Armoring


2.5 mm Gel Filled Buffer Tubes

Water Blocking Gel


Strength Elements

250 Micron Fiber

Binder

Ripcord (2)




Single Jacket/Single Armor O-XXX-LA-XY-F12NS/25T 5 0.45/11.5 6.8/17.2 4.5/11.5 607/2700 180/800 81 121

2 - 60 Fibers

62 - 72 Fibers O-XXX-LA-XY-F12NS/25T 6 0.47/11.9 7.0/17.9 4.7/11.9 607/2700 180/800 86 128






Singlemode/Multimode O-XXX-LA-CM-F12NS/25T/AAaaa/BBbbb Refer to above specifications. Composite (4-288 Fibers)

Outside Plant Arid-Core Stranded Loose Tube CableArmored

Jacket/Armor Combinations for Buried/Underground/Aerial Applications


Arid-Core water blocking technology helps protect fibers from moisture and reduces termination effort

Flexible 2.5mm buffer tubes improve kink resistance, reduce bend sensitivity and facilitates route management in closures

Medium Density Polyethylene (MDPE) jacket is rugged, durable and easy to strip















Drip N/A N/A




CommScope Optical Cables are qualified under the general guidelines to the following specifications:ANSI/ICEA S-87-640-2006; Telcordia GR-20-CORE Issue 3; EN 187105



8T LightScope NZDTM




Buffer Tubes 13-24 repeat color sequence with tracer stripes


5M LazrSPEED



17/73

p


Arid-Core Stranded Loose TubeNon-Armored, All-Dielectric Cable(72 Fiber Version Shown)

PE Outer Jacket


2.5 mm Buffer Tubes


Strength Elements

250 Micron Fibers

Binder

Ripcord (1)

Binder

For Buried/Underground/Aerial Applications Arid-Core water blocking technology helps protect fibers from moisture and reduces termination effort









Single Jacket/2 - 60 Fibers O-XXX-LN-XY-F12NS/25T 5 0.40/10.2 6.0/15.3 4.0/10.2 607/2700 180/800 48 71

62 - 72 Fibers O-XXX-LN-XY-F12NS/25T 6 0.42/10.5 6.2/15.8 4.2/10.5 607/2700 180/800 52 78






Singlemode/Multimode O-XXX-LN-CM-F12NS/25T/AAaaa/BBbbb Refer to above specifications. Composite (4-288 Fibers)

Outside Plant Arid-Core Stranded Loose Tube CableNon-Armored, All-Dielectric













Drip N/A N/A







8T LightScope NZDTM




Buffer Tubes 13-24 repeat color sequence with tracer stripes


5M LazrSPEED


7


18/73



Double Jacket/Single ArmorLoose Tube Cable(72 Fiber Version Shown)

PE Outer Jacket

Ripcord (2)

Steel Tape Armoring

Water Blocking Tape

Binder

2.5 mm Buffer Tubes

PE Inner Jacket


250 Micron Fibers

Water Blocking Tape

Strength Elements

Ripcord (1)

Multi-Jacketed Stranded Loose Tube CableDouble Jacketed, Single Armored

Jacket/Armor Combinations for Buried/Underground/Aerial ApplicationsCorrugated steel tape armor is strong yet flexible providing additional crush and rodent protection





Outer Minimum Bend Radius Maximum Tensile Load WeightProduct Type/ Catalog Sub Diameter Loaded Unloaded lbs/meters lbs/ kg/Fiber Count Number Units inch/mm inch/cm inch/cm Short Term Long Term kft km

Double Jacket/Single Armor O-XXX-L2-XY-F12NS/25T 5 0.59/15.0 8.8/22.4 5.9/15.0 607/2700 180/800 132 196

2 - 60 Fibers

62 - 72 Fibers O-XXX-L2-XY-F12NS/25T 6 0.60/15.3 9.0/23.0 6.0/15.3 607/2700 180/800 138 205






Singlemode/Multimode O-XXX-L2-CM-F12NS/25T/AAaaa/BBbbb Refer to above specifications. Composite (4-288 Fibers)

*Other jacket/armor configurations available upon request.



8T LightScope NZDTM





5M LazrSPEED














Drip N/A N/A




CommScope Optical Cables are qualified under the general guidelines to the following specifications:ANSI/ICEA S-87-640-2006; Telcordia GR-20-CORE Issue 3; EN 187105; RUS/RDUP CFR 1755.902 RDTelecommunications Program Listed


19/73

p



Outside Plant Arid-Core Mini Stranded Loose Tube CableArmored

Jacket/Armor Combinations for Buried/Underground/Lashed Aerial Applications

Very small 2.0 mm buffer tubes improve kink resistance and facilitate route management in closures



Smaller form factor cable can be utilized for tight duct spaces





Single Jacket/Single Armor2 - 72 Fibers O-XXX-LA-XY-FZZNS/20T 6 0.43/10.8 6.4/16.2 4.3/10.8 607/2700 180/800 79 117

74 - 96 FibersO-XXX-LA-XY-FZZNS/20T 8 0.48/12.1 7.2/18.2 4.8/12.1 607/2700 180/800 92 137

98 - 120 Fibers O-XXX-LA-XY-FZZNS/20T 10 0.52/13.1 7.8/19.7 5.2/13.1 607/2700 180/800 108 160

122 - 144 Fibers O-XXX-LA-XY-FZZNS/20T 12 0.58/14.6 8.6/22.0 5.8/14.6 607/2700 180/800 134 200






Compression (Armored) 250 lbf/in (44 N/mm) FOTP-41; IEC 60794-1-2; Sec. 7



Strain See long & short term tensile loads FOTP-33; IEC 60794-1-2; Sec. 5

Twist 10 Cycles FOTP-85; IEC 60794-1-2; Sec. 11

Water Penetration 24 Hours FOTP-82; IEC 60794-1-2; Sec. 24Environmental Test SpecificationsTest Requirement Test Method

Cable Freeze +28 F (-2 C) FOTP-98

Drip 140F (+70 C) FOTP-81; IEC 60794-1-2, Sec. 17





Mini-Diameter Stranded Loose Tube Cable(72 Fiber Armored Version Shown)

PE Outer Jacket

Steel Tape Armoring



Water Blocking Gel


Strength Elements

250 Micron Fiber

Binder

Ripcord (2)



8T LightScope NZDTM





5M LazrSPEED



20/73


Arid-Core Mini Stranded Loose TubeNon-Armored, All-Dielectric Cable(72 Fiber Version Shown)

PE Outer Jacket




Strength Elements

250 Micron Fibers

Binder

Ripcord (1)

Binder

For Buried/Underground/Lashed Aerial Applications


Smaller form factor cable which can be utilized for tight duct space requirements

Small and flexible 2.0mm buffer tubes improve kink resistance, reduce bend sensitivity, and facilitates route management in closures



Outside Plant Arid-Core Mini Stranded Loose Tube CableNon-Armored, All-Dielectric




Single Jacket/2 - 72 Fibers O-XXX-LN-XY-F12NS/20T 6 0.37/9.5 5.6/14.3 3.7/9.5 607/2700 180/800 48 72

74 - 96 FibersO-XXX-LN-XY-F12NS/20T 8 0.41/10.5 6.2/15.7 4.1/10.5 607/2700 180/800 58 86
















Drip +140F (+70C) FOTP-81; IEC 60794-1-2; Sec. 17







8T LightScope NZDTM





5M LazrSPEED



21/73

p


LSZH Arid Core Mini Stranded Loose TubeArmored Cable(72 Fiber Version Shown)

LSZH Outer JacketSteel Tape Armoring




Strength Elements

250 Micron Fibers

Ripcord (1)

Binder

For Indoor/Outdoor Applications that Require a LSZH Rating Helps eliminate transition splicing at the building entranceLightweight, small design is installer-preferred due to ease of handlingFlexible 2.0mm buffer tubes improve kink resistance, reduce bend sensitivity, and facilitate route management

UV-resistant jacket suitable for use outdoors Corrugated steel armor is strong yet flexible providing additional crush and rodent protection


Indoor/Outdoor LSZH Arid-Core

Mini Stranded Loose Tube CableLow-Smoke Zero-Halogen, Armored

Product Type/ Catalog Subunits Outer Diameter Minimum Bend Radius Maximum Tensile Load WeightFiber Count Number inch/mm Loaded Unloaded Short Term Long Term lbs/ kg/inch/cm inch/cm lbs/newtons lbs/newtons kft km

Single Jacket/2 - 72 Fibers Z-XXX-LA-XY-F12BK/20G 6 0.48/12.3 7.3/18.5 4.8/12.3 607/2700 180/800 123 183

74 - 96 FibersZ-XXX-LA-XY-F12BK/20G 8 0.54/13.6 8.0/20.4 5.4/13.6 607/2700 180/800 143 213

98 - 120 Fibers Z-XXX-LA-XY-F12BK/20G 10 0.58/14.6 8.6/21.9 5.8/14.6 607/2700 180/800 166 248

122 - 144 Fibers Z-XXX-LA-XY-F12BK/20G 12 0.64/16.1 9.5/24.2 6.4/16.1 607/2700 180/800 201 300

Flame Test Specifications

Flame Test Listing NEC Type: OFNR-LS (ETL) and c(ETL)

Flame Test Standard UL-1666, UL-1685, IEC 60332-3, IEC 61034-2; IEC 60754-2,

IEEE 383





















8T LightScope NZDTM





5M LazrSPEED



22/73


LSZH Mini Stranded Loose TubeNon-Armored, All-Dielectric Cable(72 Fiber Version Shown)

LSZH Outer Jacket




Strength Elements

250 Micron Fibers

Binder

Ripcord (1)

For Indoor/Outdoor Applications that Require a LSZH Rating

Helps eliminate transition splicing at the building entrance


Flexible 2.0mm buffer tubes improve kink resistance, reduce bend sensitivity, and facilitate route management

UV-resistant jacket suitable for use outdoors


Indoor/Outdoor LSZH Mini Stranded Loose Tube CableLow-Smoke Zero-Halogen, Non-Armored, All-Dielectric

Product Type/ Catalog Subunits Outer Diameter Minimum Bend Radius Maximum Tensile Load WeightFiber Count Number inch/mm Loaded Unloaded Short Term Long Term lbs/ kg/inch/cm inch/cm lbs/newtons lbs/newtons kft km

Single Jacket/2 - 72 Fibers Z-XXX-LN-XY-F12BK/20G 6 0.43/11.0 6.5/16.5 4.3/11.0 607/2700 180/800 85 127

74 - 96 FibersZ-XXX-LN-XY-F12BK/20G 8 0.47/12.0 7.1/18.0 4.7/12.0 607/2700 180/800 101 151

98 - 120 Fibers Z-XXX-LN-XY-F12BK/20G 10 0.52/13.3 7.8/19.9 5.2/13.3 607/2700 180/800 123 183

122 - 144 Fibers Z-XXX-LN-XY-F12BK/20G 12 0.58/14.7 8.7/22.0 5.8/14.7 607/2700 180/800 151 225



8T LightScope NZDTM





5M LazrSPEED


Flame Test Specifications

Flame Test Listing NEC Type: OFNR-LS (ETL) and c(ETL)

Flame Test Standard UL-1666, UL-1685, IEC 60332-3, IEC 61034-2; IEC 60754-2,

IEEE 383




















23/73

p


Outside Plant Stranded Loose Tube CableHigh Density Loose Tube

For Buried/Underground/Aerial Applications



Flexible buffer tubes improve kink resistance, reduce bend sensitivity and facilitates route management in closures

Eliminates the need for ribbonized fibers by giving you a compact cable with up to 576 loose fibers


All-Dielectric High DensityLoose Tube Fiber Cable(432 Fiber Version Shown)

PE Outer Jacket

Strength Elements

3.5 mm Gel FilledBuffer Tube


Fiber Binder Threads


250 Micron Optical Fibers

Ripcord (1)

SubunitDetail




Armored 290-432 Fibers O-XXX-LA-XY-F24NS 18 0.90/22.9 13.5/34.3 9.0/22.9 607/2700 180/800 241 358

434-576 Fibers O-XXX-LA-XY-F24NS 24 1.03/26.2 15.4/39.2 10.3/26.2 607/2700 180/800 310 461

All Dielectric 290-432 Fibers O-XXX-LN-XY-F24NS 18 0.85/21.5 12.7/32.2 8.5/21.5 607/2700 180/800 173 258

434-576 Fibers O-XXX-LN-XY-F24NS 24 0.98/24.8 14.6/37.2 9.8/24.8 607/2700 180/800 233 347

Double JacketedSingle Armored O-XXX-L2-XY-F24NS 18 1.02/25.9 15.3/38.9 10.2/25.9 607/2700 180/800 337 501

290-432 Fibers

434-576 Fibers O-XXX-L2-XY-F24NS 24 1.15/29.2 17.3/43.8 11.5/29.2 607/2700 180/800 423 630






Compression (dielectric) 125 lbf/in (22 N/mm) FOTP-41; IEC 60794-1-2; Sec. 7

Compression (armored) 250 lbf/in (44 N/mm) FOTP-41; IEC 60794-1-2; Sec. 7















8T LightScope NZDTM






5M LazrSPEED



24/73


Product Type/ Catalog Minimum Bend Radius Maximum Tensile Load Weight

Fiber Count NumberSub Outer Diameter

Loaded Unloaded Short Term Long Term l bs/ kg/

Units inch/mminch/cm lbs/newtons kft km kft km

Single JacketS-XXX-LN-XY-F12NS/NFB 5 0.46/11.8 7.0/17.7 4.6/11.8 960/4270 775/3447 66 99

2-60 Fibers

ADSS Short Span Loose Tube CableAll-Dielectric, Self-Supporting (ADSS) Aerial Design

For Aerial Long Haul and Metro Applications

Small cable diameter and bend radius for lightweight and ease of handling and installation

Designed for aerial spans requiring a self-supporting, non-messengered product

Single Medium Density Polyethylene (MDPE) jacket for fast convenient cable preparation

Fully qualified in accordance with Telcordia Technologies, EIA/TIA and IEEE Standards

Custom Sag & Tension Tables are available upon request.


ADSS Double Jacket Loose TubeAll-Dielectric Cable(60 Fiber Version Shown)

PE Outer Jacket

Aramid Strength Elements

3.0mm Gel-Filled Buffer Tube



Ripcord (1)

Binder

250 Micron Fibers

Other ADSS designs are available upon request.





















8T LightScope NZDTM

Non-Zero Dispersion-

Shifted Singlemode FiberFor Composites Only: aaa is replaced with singlemode fiber count bbb is replaced by multimode fiber count

AAis replaced with singlemode type BB is replaced by multimode type




5M LazrSPEED



25/73

p



Figure-8 Armored Cable(60 Fiber Version Shown)

MPDE Outer Jacket

Stranded 0.25 Galvanized Steel Messenger

Steel Tape Armoring

Binder


2.5 mm Gel Free Buffer Tube


250 Micron Fibers

Strength Elements

Ripcord (1)

Binder

Outside Plant Self-Supporting Figure-8 CableMessengered Stranded Loose Tube Armored

For Aerial Applications


Uses standard figure-8 cable hardware and installation practices

100% gel-free stranded loose tube cable reduces cable prep time



Minimum Bend Radius WeightProduct Type/ Catalog Buffer Cable OD Cable Height Messenger Loaded Unloaded lbs/ kg/Fiber Count Number Tubes inch/mm inch/cm Jacket. OD inch/cm inch/cm kft km

Figure-8 Armored 2 - 60 Fibers M-XXX-LA-XY-F12NS/ 5 0.47/11.9 0.89/22.5 0.33/8.3 7.0/17.8 4.7/11.9 230 342 25D



Operating Temperature -40 to +158F (-40 to +70C)Storage Temperature -40 to +167F (-40 to +75C)










Drip N/A N/A







8T LightScope NZDTM





5M LazrSPEED



26/73


For Aerial Applications


Uses standard figure-8 cable hardware and installation practices

100% gel-free stranded loose tube cable reduces cable prep time




Operating Temperature -40 to +158F (-40 to +70C)Storage Temperature -40 to +167F (-40 to +75C)










Drip N/A N/A





Figure-8 Self-SupportingNon-Armored Cable(60 Fiber Version Shown)

MDPE Outer Jacket

Stranded 0.25 Flooded Steel Messenger


Binder

Strength Elements

2.5 mm Gel-Free Buffer Tube


250 Micron Fiber

Ripcord

Binder

\ Cable Outer Messenger Minimum Bend Radius WeightProduct Type/ Catalog Buffer Diameter Cable Height Jacket OD Loaded Unloaded lbs/ kg/Fiber Count Number Tubes inch/mm inch/cm inch/mm inch/cm inch/cm kft km

Figure-8 Non-Armored 2 - 60 Fibers M-XXX-LN-XY-F12NS/ 5 0.41/10.5 0.85/21.7 0.33/8.3 16.5/42.0 8.2/21.0 200 299 25D

Outside Plant Self-Supporting Figure-8 CableMessengered Stranded Loose Tube Non-Armored


Variables in the Catalog Number:

XXX = Total Fiber Count XY = Fiber Grade 8WLightScope ZWP


8T LightScope NZDTM





5M LazrSPEED



27/73

p



Figure-8 Armored Cable(72 Fiber Version Shown)

MPDE Outer Jacket

Stranded 0.25 Galvanized Steel Messenger

Steel Tape Armoring

Binder


3.0 mm Gel Filled Buffer Tube


250 Micron Fibers

Strength Elements

Ripcord (1)

Binder

Outside Pla

Broadband Fiber Catalog

Documents

Transcript of Broadband Fiber Catalog