Soil Conditioner & Fertiliser - BioMAX BioLogic Blend Improve soil phosphorus availability.Rapid soil improvement of soil structure, moisture retention, nutrient release and stimulate soil biological processes.

Phosphorus 2.3%Sulphur 1.6%Calcium 6.4%Iron 1.6%Humic 22.6%

Upfront Fertiliser with Humic - NutriMAX Granular RangeIncrease fertiliser availability, and return on nutrient investment.Easy apply NPS granular fertilisers blended with BioMAX Soluble Humate Prill with coating technology to reduce dust and moisture absorption.

Various analyses available.Blends of MAP, SOA, DAP, Urea, Guano with Humates (5-20%). Refer to product flyer for analysis details.

Sustained Phosphorus Source - NutriMAX Guano GranulesSustained phosphorus release for better and healthier soils and crops.

Phosphorus 12%Calcium 29%Silica 9%Magnesium 2%Iron, Manganese, Zinc, Boron

Concentrated Soluble Humic - BioMAX Soluble Humate PrillIncrease fertiliser availability.Rapid soil improvement of soil structure, moisture retention, nutrient release and stimulate soil biological processes.

Broadacre Cropping Range

Custom blends available

Humic Acid 50%

Also available as a GranuleHumic Acid 65%

Seed Dressing - SureCROP VAMStimulate root growth, root mass and early vigour.Better plant access to moisture and nutrients in the root zone.Increase phosphorus uptake. Healthy Soil Healthy People

Manufactured in Australia by LawrieCo www.lawrieco.com.au Ph 08 8260 1134 2A Capelli Road, Wingfield SA 5013

VAMTYPICAL ANALYSIS (w/v)

RECOMMENDATIONS

Rates and timings may change depending on crop and season. Always consult a LawrieCo consultant or distributor for specific recommendations.

MYCHORRIZAL FUNGI AND NUTRIENT SEED TREATMENT WITH BACILLUS & TRICHODERMAStimulate root growth, root mass and seedling vigour. Better moisture and nutrient access in the root zone. Establish natural mycorrhizal fungi and plant root colonisation.

Not applicable to 1000L containers

APPLICATIONAGITATE WELL BEFORE USEConditions of use: Apply to seed just prior to sowing, up to 14 days in advance.Apply using conventional seed dressing applicator. Determine auger flow rate and apply appropriate volume via hopper.If required, use LawrieCo BioMAX Fulvic or water as a thinner for easier application. (2L BioMAX Fulvic to 10L SureCROP VAM).For Rootlings/Nursery, ensure root coverage. Dilute as per recommendations.Compatibility: Compatible with rhizobium innoculums that have pH 6.5 or above. Compatible with chemically treated seed. Ensure 2L BioMAX Fulvic is mixed in with every 10L of SureCROP VAM prior to application to seed. BioMAX Fulvic will provide a ‘buffer’ between chemical and biological components. Do Not mix SureCROP VAM directly with chemicals.Contact LawrieCo / your distributor for further compatibility information

May be harmful if swallowed. If medical advice is needed, have the product container or label on hand.SAFETY DIRECTIONS Wash hands thoroughly after handling. Wear eye protection/face protection (AS/NZS 1336/37). Dispose of contents/container to an approved waste disposal plant in accordance with local regulations. FIRST AIDIf Swallowed: do NOT induce vomiting. Rinse mouth and give plenty of water to drink. If in Eyes: hold eye lids apart and flush continuously with running water for 15 minutes. If skin or hair contact occurs: remove contaminated clothing and wash with plenty of soap and water. If any symptoms persist get medical advice/attention or contact a Poisons Information Centre (phone 13 11 26).Additional info refer to Safety Data Sheet - Code No. 8021IMPURITIES Cadmium 0.6mg/kg; Lead 1.5mg/kg; Mercury 0.5mg/kgWarning Use of this product may result in mercury residues in excess of the maximum permissible concentration (MPC) in plant and animal products and may also result in accumulation of these residues in soils.Conditions of Sale The Manufacturer/Distributor warrants that this product contains the ingredients specified, and is fit for the purposes stated on this label, when it is used in accordance with directions, under normal conditions. Only the Manufacturer/Distributor is authorised to make any warranty, guarantee or recommendations concerning the product as the location, rate of application and other conditions are beyond the control of the Manufacturer/Distributor.

20L

500L

1000L

Batch

(0-2-1-0)

This label complies with the Fertiliser Industry Code of Practice for Fertiliser Description and Labelling2017

0301

SURECROP

Phosphorous as citrate soluble 0.726%Phosphorous as citrate insoluble 0.954%Phosphorous Total 1.68%Potassium as organic 0.71% Pottasium Total 0.71%Sulphur as organic 0.15% Sulphur Total 0.15%Calcium as organic 0.28% Calcium as phosphate 4.89% Calcium Total 5.17% Silicon as silicate 2.52%Zinc as oxide 2.40%

Manganese as carbonate 1.53% Humic Acid 4.4% Fulvic Acid 3.18% AM inoculant 32,500 propagule/L multiple spec.

Beneficial Bacteria - Bacillus SpeciesB.subtilis, B.laterosporus, B. licheniformus, B. megaterium, B. pumilus, P. polymyxaBeneficial Fungi - Trichoderma SpeciesT. harzianum, T. viride, T. koningii, T. polysporumpH 8.0 - 8.30 Specific gravity 1.22 - 1.25

KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS

Seed Dressing Rate / T of seed Timing

Cereals 10 L/t Apply to seed pre-sowing

Brassicas/Canola/Lupins 20 L/t SureCROP VAM gives essential nutrition for non-

mychorrizal plants. Or substitute SureCROP Zinc

Legumes (Beans/Peas) 6-10 L/t Apply to seed pre-sowing

Pasture/Lucerne/Turf up to 40 L/t Apply to seed pre-sowing

Potatoes 5 L/t Apply to seed potatoes pre-sowing

Onions/Carrots 40 L/t Apply to seed pre-sowing

Chemically Treated Seed

Ensure 2L BioMAX Liquid Fulvic is mixed in with every 10L of SureCROP VAM prior to application to seed.

Liquid Inject /Fertigation Rate / Ha

Trees/Vines /Turf/Veg 1-2 L/Ha

Broadacre 100-200 ml/Ha At seeding

Best Before

Once applied, ideally sow seed ASAP & within 14 days.Zinc deficiency: Where additional zinc in required, combine with SureCrop Zinc.

Pre & Planting Rate Application

Dormant Tree/Vine 1:5 dilution Plant dip prior to planting

Tree / Vine 1-2 L / 1000L Water jet with planting water

Vegetables 1:20 dilution Seedling drench to point of saturation

P 1.7%Ca 5.2%Si 2.5%Zn 2.4%Mn 1.5%

Humic 4.4%Fulvic 3.2%AM fungi32,500 propagules

Building wealth from soil withNext Generation Fertiliser

www.lawrieco.com.au

Soil / Base Applied Foliar Injection Seed / Rootling Dressing

Soil Amendment Seed Dressing Upfront Fertiliser Liquid Inject

BioMAX BioLogic Blend SureCROP VAM SureCROP Zinc

NutriMAX Granular(crop specific

blend)

Add to Fertiliser+ BioMAX Soluble

Humate Prill

Add to Fertiliser+ BioMAX Solube

Humic Fulvic

Cereals 0.2-0.5 T/ha 10 L/T of Seed 6 L/T of Seed 50-150 kg/ha 5-20% of total upfront fertiliser 2-5 kg/ha

Canola/Brassicas

0.2-0.5 T/ha 20-30 L/T of Seed 50-150 kg/ha 5-20% of total upfront fertiliser 2-5 kg/ha

Legumes 0.2-0.5 T/ha 6-10 L/T of SeedLupin 20 L/T 6-10 L/T of Seed 50-150 kg/ha 5-20% of total

upfront fertiliser 2-5 kg/ha

Talk to our team of experts to find out how farms we work with use fertiliser solutions to address soil health and give greater returns on nutrient investment.

Seed Dressing - SureCROP ZincStimulate root growth, root mass and early vigour.Better plant access to moisture and nutrients in the root zone.Increase zinc uptake, to address deficiencies.

Phosphorus 1.7%Potassium 0.6%Calcium 4.2%Zinc 20%

ZINC

TYPICAL ANALYSIS (w/v)

RECOMMENDATIONS

Rates and timings may change depending on crop and season. Always consult a LawrieCo consultant or distributor for specific recommendations.

20% ZINC, NUTRIENT & BIO-STIMULANT SEED TREATMENT WITH BACILLUS & TRICHODERMAZinc with Phosphorous and Calcium for enhanced root growth, early seedling vigour and disease suppression. Fulvic and humic complexing provides natural auxins, cytokins, indole acetic acid and gibberelins for root stimulation.

Not applicable to 1000L containers

APPLICATIONAGITATE WELL BEFORE USEApply using conventional seed dressing applicator. Determine auger flow rate and apply appropriate volume via hopper. If required, use 1L BioMAX Fulvic to 5L SureCROP Zinc or water as a thinner for easier application. For Rootlings/Nursery, ensure root coverage. Compatibility: Compatible with rhizobium innoculums that have pH 6.5 or above.Compatible with chemically treated seed. Ensure 2L BioMAX Fulvic is mixed in with every 10L of SureCROP ZINC prior to application to seed. BioMAX Fulvic will provide a ‘buffer’ between chemical and biological components. Do Not mix SureCROP VAM directly with chemicals.Contact LawrieCo / your distributor for further compatibility info.

Classified as Hazardous in accordance with GHS and in accordance with SUSMP. Schedule 6 Poison Contains the following ingredients: Zinc Sulphate <10%w/w Manganese Sulphate <10%w/w Copper Sulphate <5%w/w Non-Hazardous Ingredients >75%w/wSAFETY DIRECTIONS Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Wear eye protection/face protection (AS/NZS 1336/37). Dispose of contents/container to an approved waste disposal plant in accordance with local regulations. Avoid contact with eyes. FIRST AID For advice, contact a Poisons Information Centre (phone 13 11 26) or a doctor (at once). If Swallowed: do NOT induce vomiting. Rinse mouth and give plenty of water to drink. Contact a doctor or Poisons Information Centre if symptoms occur. If in Eyes: hold eye lids apart and flush continuously with running water. Remove contact lenses, if present and easy to do so. Continue flushing for at least 15 minutes and consult a doctor as a precaution. If skin or hair contact occurs: remove contaminated clothing and wash with plenty of soap and water. If any symptoms persist get medical advice/attention.Additional info refer to Safety Data Sheet - Code No. 8020IMPURITIES Cadmium 1.4mg/kg; Lead 2.1mg/kg; Mercury 0.15mg/kgWarning Use of this product may result in cadmium residues in excess of the maximum permissible concentration (MPC) in plant and animal products and may also result in accumulation of these residues in soils.Warning Excessive use of molybdenum can be harmful to stock. Plant levels of molybdenum can be high for 4 weeks after application. It is advisable to keep stock off treated areas for this period. Check rate and frequency of use with appropriate authorities.Conditions of Sale The Manufacturer/Distributor warrants that this product contains the ingredients specified, and is fit for the purposes stated on this label, when it is used in accordance with directions, under normal conditions. Only the Manufacturer/Distributor is authorised to make any warranty, guarantee or recommendations concerning the product as the location, rate of application and other conditions are beyond the control of the Manufacturer/Distributor.

20L

500L

1000L

Batch

(0-2-1-0)

This label complies with the Fertiliser Industry Code of Practice for Fertiliser Description and Labelling

HARMFUL IF SWALLOWED CAUSES EYE IRRITATION

POISONKEEP OUT OF REACH OF CHILDREN

READ SAFETY DIRECTIONS

Phosphorous 1.68%Potassium 0.6% Calcium 4.2%

Zinc 20.0%

pH 7.5 - 8.5Specific gravity 1.28-1.3

Wealth from SoilManufactured in Australia by LawrieCo www.lawrieco.com.au Ph 08 8260 1134 47 Naweena Road, Regency Park SA 5010 20

1802

23

Seed Dressing Rate / T of seed Timing

Cereals 6 L/t Apply to seed pre-sowing

Brassicas/Canola 20-30 L/t Apply to seed pre-sowing

Legumes (Beans/Peas/Lupins) 6-10 L/t Apply to seed pre-sowing

Pasture/Lucerne/Turf 20-30 L/t Apply to seed pre-sowing

Potatoes 5 L/t Apply to seed potatoes pre-sowing

Onions/Carrots 40 L/t Apply to seed pre-sowing

Chemically Treated Seed

Ensure 2L BioMAX Liquid Fulvic is mixed in with every 10L of SureCROP ZINC prior to application to seed.

Liquid Inject /Fertigation Rate / Ha

Trees/Vines /Turf/Veg 1-2 L/Ha

Broadacre 100-200 ml/Ha At seeding

Pre & Planting Rate Application

Dormant Tree/Vine 1:5 dilution Plant dip prior to planting

Tree / Vine 1-2 L / 1000L Water jet with planting water

Vegetables 1:20 dilution Seedling drench to point of saturation

High Analysis Humic - BioMAX 100% Soluble Humic FulvicImprove fertiliser stability and plant uptake.Rapid soil improvement of soil structure, moisture retention, nutrient release and stimulate soil biological processes.

Humic 65%Fulvic 10%

Healthy Soil Healthy Peoplewww.lawrieco.com.au Ph 08 8260 1134 2A Capelli Road, Wingfield SA 5013

100% SOLUBLEHUMIC FULVIC

TYPICAL ANALYSIS (w/w) dry weight basis

RECOMMENDATIONS

Rates and timings may change depending on crop and season. Always consult a LawrieCo consultant or distributor for specific recommendations.

65% HUMIC + 10% FULVIC ACIDS TO IMPROVE NITROGEN UPTAKE + WATER USE EFFICIENCYHumic and fulvic are concentrated carbon sources which stabilise and chelate nutrients for improved plant uptake. Improve water use efficiency. Buffer excess salt and toxicities in water or soil. Stimulate beneficial biology. Foliar or fertigate.

APPLICATIONAGITATE WELL BEFORE USEConditions of use: Ensure adequate leaf area index for nutrient absorption. Assists when plant is under stress. e.g. moisture, frost, disease or pests.Spray at moderate ambient temperatures, 11-28 degrees. High humidity will stimulate plant uptake. For best results use early morning or late afternoon.Do not spray in winds > 24 km/h, ideally not over 8 km/hEquipment: Ensure spray equipment is clean, remove undissolved particles that may block nozzles and chemical / disease contaminants prior to use.Water rate 50-100L/ha • 32-50 mesh filtrationDilution rate 1:10 • Nozzle size 3-5Compatibility: Physically compatible with a range of nutrients and chemicals. A compatibility jar test is recommended before use, incompatibility is indicated by precipitation and/or settling. Contact LawrieCo / your distributor for further compatibility information

Classified as Hazardous in accordance with Safe Work Australia - Globally Harmonised System (GHS)Contains the following ingredients: Humic Acid, potassium salt: 80-90% w/w Non-Hazardous Ingredients: 10-20%w/w If medical advice is needed, have the product container or label on hand.SAFETY DIRECTIONSAvoid breathing dust. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves (AS/NZS 2161), eye and face protection (AS/NZS 1336/37).If eye or skin irritation occurs: get medical attention. For specific treatment, see supplemental first aid instruction on this label. Take off contaminated clothing and wash before reuse. Dispose of contents and container to an approved waste disposal plant in accordance with local regulations.FIRST AID IF ON SKIN: Wash with plenty of soap and water. IF INHALED: Remove victim to fresh air and keep at a rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. IF SWALLOWED: Rinse mouth and give plenty of water to drink.Call a POISION CENTRE (13 11 26) or doctor if you feel unwell.Additional info is listed in the Safety Data Sheet - Code No. 8013IMPURITIES Cadmium 6.7mg/kg; Lead 2.6mg/kg; Mercury 1.5mg/kgWarning Use of this product may result in cadmium residues in excess of the maximum permissible concentration (MPC) in plant and animal products and may also result in accumulation of these residues in soils.Warning Use of this product may result in mercury residues in excess of the maximum permissible concentration (MPC) in plant and animal products and may also result in accumulation of these residues in soils. Conditions of Sale The Manufacturer/Distributor warrants that this product contains the ingredients specified, and is fit for the purposes stated on this label, when it is used in accordance with directions, under normal conditions. Only the Manufacturer/Distributor is authorised to make any warranty, guarantee or recommendations concerning the product as the location, rate of application and other conditions are beyond the control of the Manufacturer/Distributor.

Batch

This label complies with the Fertiliser Industry Code of Practice for Fertiliser Description and Labelling

CAUSES SKIN IRRITATION CAUSES SERIOUS EYE IRRITATION

MAY CAUSE RESPIRATORY IRRITATION

2016

0829

Humic Acid 65.4% As Potassium Humate 72.8%

Fulvic Acid 10.2% As Potassium Fulvate 11.4%Potassium 8.6%

Moisture content 15% max.Solids 85% min.pH 9 -10Water solubility 99.5%

KEEP OUT OF REACH OF CHILDREN READ LABEL BEFORE USE

Fertigation and Foliar

Nitrogen 50-100 grams / hectare for each unit of Nitrogen applied as UAN, Urea, SOA

e.g. 2.3 - 4.6 kg/ha with 100 kg/ha of Urea

2.1 - 4.2 kg/ha with 100 litres of UAN

1.0 - 2.1 kg/ha with 100 kg/ha of SOA

Salt - Water 0.5 - 1 kg/ha with each and all irrigation applications

Salt - Soil Mitigation 0.5 - 1 kg/ha with each and all irrigation applications

Soil Improvement 0.5 - 1 kg/ha with each and all irrigation applications

N.B. This product is not compatible used in concentration with acidic elements or chemicals.

For combination with acidic elements and chemicals, select BioMAX 100% Soluble Fulvic or BioMAX Liquid Fulvic

Mixing Tips Place product in a mesh basket and dispense through this mesh into Fertigation or Spray tank.

To make 12% Humic Liquid, add 120gm BioMAX 100% Soluble Humic Fulvic to 1L water and stir vigorously. Apply as Foliar 3-7 L/ha or Fertigation 15-30 L/ha every 2-3 weeks as required.

WARNING

25kg

USDA NOP Compliant

Consult a LawrieCo Area Manager or distributor for specific recommendations.

Building wealth from soil withNext Generation Fertiliser

www.lawrieco.com.au

Post Emergent Fertiliser Options

Growth StageHumiPLEX Trace, ZM,

ZMC

NutriMAX PhosCal

NutriMAX Growth

NutriMAX Fruiting

BioMAX Soluble Kelp

Powder

NutriMAXTriple Feed

Cereals Zadoks GS 13 to 31 (3-5 Leaf stage through to first node) 2-5 L/ha 2-5 L/ha 2-5 L/ha 0.3-1kg/ha

(From GS20) 3 L/ha

Zadoks GS 13 to 37 (Prior to flag initiation) 2-5 L/ha 3 L/ha

Zadoks GS 29 to 50 (Late tillering to early ear emergence) 2-8 L/ha 0.3-1kg/ha

(GS 40-49)

Canola/ Brassicas

4-6 leaf stage (Mid Rosette) 2-5 L/ha 2-5 L/ha 2-5 L/ha 0.3-1kg/ha 3 L/ha

Pre-Flowering (Late Rosette-Bolt) 2-5 L/ha 2-5 L/ha 2-5 L/ha 0.3-1kg/ha 3 L/ha

Stem elongation to flower bud development 2-5 L/ha 2-8 L/ha

Legumes 4-6 leaf (2nd-3rd node with sufficient leaf area) 2-5 L/ha 2-5 L/ha 2-5 L/ha 0.3-1kg/ha 3 L/ha

Pre-Flowering 2-5 L/ha 2-5 L/ha 2-5 L/ha 0.3-1kg/ha 3 L/ha

V4 4th trifoliate leaf unfolded to R1 early bloom 2-8 L/ha

Liquid Phosphorus and Calcium - NutriMAX PhosCalSustained phosphorus release. Calcium for improved cell division, elongation and strength. Improve yield potential, fruit set and flowering in all crops.Aids response to biotic and abiotic plant stresses.

NPK plus Calcium - NutriMAX GrowthBalanced growth to build yield and quality potential.Build cell strength and natural plant responses to environmental pressures.

Concentrated Kelp - BioMAX Soluble Kelp PowderConcentrated powder, for triggering plant responses for yield, growth and environmental stress.Also available in a liquid form - BioMAX Foliar Kelp

Chelated Trace Elements - HumiPLEX ZMCCorrect and maintain ideal levels of trace element levels in the plant.Broad spectrum Trace or specific micronutrient options e.g. ZM, ZMC.Improved uptake with natural chelating agent, fulvic.

NPK plus Fulvic - NutriMAX Triple FeedBalanced growth response with range of NPK analysis.Build yield potential.Improved uptake wtih natural chelating agent, fulvic.

PHOS CAL

TYPICAL ANALYSIS (w/v)

RECOMMENDATIONS

Rates and timings may change depending on crop and season. Always consult a LawrieCo consultant or distributor for specific recommendations.

MICRONISED CALCIUM 29% PHOSPHORUS 11% SILICON 15% BORON 1.5% COMPLEXED WITH FULVICNutrient ‘combo’ is ideal for plant uptake and balanced, healthy plants. Maintain ideal plant pH balance when phosphorus is alkalised with calcium. Optimise quality of produce and natural response to pest & disease pressure.

Not applicable to 1000L containers

APPLICATIONAGITATE WELL BEFORE USEConditions of use: Ensure adequate leaf area index for nutrient absorption. Not for use when plant is under stress. e.g. moisture, frost, disease or pests.Spray at moderate ambient temperatures, 11-28 degrees. High humidity will stimulate plant uptake. For best results use early morning or late afternoon.Do not spray in winds > 24 km/h, ideally not over 8 km/hEquipment: Ensure spray equipment is clean, remove undissolved particles that may block nozzles and chemical / disease contaminants prior to use.• Water rate 20-100L/ha broadacre/pasture, 100-500L/Ha medium size horticulture, 500-2000L/Ha tree crops/orchards/vines • Dilution rate 1:10 broadacre/pasture 1:100 tree crops/vines/horticulture• 35-50 mesh filtration • Nozzle size 3-5 Compatibility: Physically compatible with a range of nutrients and chemicals. A compatibility jar test is recommended before use, incompatibility is indicated by precipitation and/or settling. Contact LawrieCo / your distributor for further compatibility information

If medical advice is needed, have the product container or label on hand.SAFETY DIRECTIONS Wash hands thoroughly after handling. Wear eye protection/face protection (AS/NZS 1336/37). Dispose of contents/container to an approved waste disposal plant in accordance with local regulations. FIRST AIDIf Swallowed: do NOT induce vomiting. Rinse mouth and give plenty of water to drink. If in Eyes: hold eye lids apart and flush continuously with running water for 15 minutes. If skin or hair contact occurs: remove contaminated clothing and wash with plenty of soap and water. If any symptoms persist get medical advice/attention or contact a Poisons Information Centre (phone 13 11 26)Additional info refer to Safety Data Sheet - Code No. 8031

Warning Do not swallow. The spray from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin.Conditions of Sale The Manufacturer/Distributor warrants that this product contains the ingredients specified, and is fit for the purposes stated on this label, when it is used in accordance with directions, under normal conditions. Only the Manufacturer/Distributor is authorised to make any warranty, guarantee or recommendations concerning the product as the location, rate of application and other conditions are beyond the control of the Manufacturer/Distributor.

10L

200L

800L

Batch

(6-11-3-0)

This label complies with the Fertiliser Industry Code of Practice for Fertiliser Description and Labelling20

1706

06

KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS

UTRIMAX

Nitrogen 6% as ureaPhosphorus 11.3% total Phosphorus 4.9% citrate solublePotassium 3.0% Sulphur 0.4% as organicCalcium 29.2% as phosphate Magnesium 1.2%

Silicon 15.5% as silicates

Boron 1.5% as borate Iron 0.82% Manganese 0.056% Zinc 0.056% pH 5.5 - 5.7Specific gravity 1.8

Rate / Ha Timing

Foliar Apply when a deficiency has been identified by tissue, petiole or SAP analysis

Cereals 2-5 L Apply prior to flag initiation or as required

Canola 2-5 L Apply prior to flower bud development or as required

Legumes (Beans/Peas/Lupins) 2-5 L Apply prior to flowering or if a boost is

required

Pasture 2-5 L Apply 2-3 weeks after emergence or if a boost is required

Lucerne 2-5 L Apply 2-3 weeks after emergence or if a boost is required

Tree Crops (Orchards/Citrus) 3-10 L Apply prior to flowering or at 2-4 weekly

intervals as required

Vines 3-7 L Apply prior to flowering or at 2-4 weekly intervals as required

Horticulture (Potatoes/Onions/

Carrots) 3-7 L Apply prior to flowering or at 2-4 weekly

intervals as required

Turf 5-20 L Apply every 2-4 weeks as required

Fertigation 5-30 L Apply at 2-4 weekly intervals as required.

BioMAX Fulvic 1-3 L Optional for increased plant uptake

Healthy Soil Healthy PeopleManufactured in Australia by LawrieCo www.lawrieco.com.au Ph 08 8260 1134 2A Capelli Road, Wingfield SA 5013

TRIAL RELEASEPlease complete the provided Evalution Form

KELP POWDER

TYPICAL ANALYSIS (w/w)

RECOMMENDATIONS

Rates and timings may change depending on crop, season, soil type and fertility. Always consult a LawrieCo consultant or distributor for specific recommendations.

100% SOLUBLE CANADIAN KELP FOR FOLIAR AND FERTIGATION APPLICATONSAn indispensible biostimulant containing potent chelating agents, natural plant hormones and complex sugars, creating balanced growth, increased resistance to frost and environmental stresses, and improved flowering and fruit set.

APPLICATION

MIX TO LIQUIDAdd 1kg kelp powder per 9.5L water and mix thoroughly.

AGITATE WELL BEFORE USE

Conditions of use: Ensure adequate leaf area index for nutrient absorption. Not for use when plant is under stress. e.g. moisture, frost, disease or pests.Spray at moderate ambient temperatures, 11-28 degrees. High humidity will stimulate plant uptake. For best results use early morning or late afternoon.Do not spray in winds > 24 km/h, ideally not over 8 km/h

Equipment: Ensure spray equipment is clean, remove undissolved particles that may block nozzles and chemical / disease contaminants prior to use.

Water rate 50-100L/ha • 32-50 mesh filtration • Dilution rate 1:10 • Nozzle size 3-5

Compatibility: Physically compatible with a range of nutrients and chemicals. A compatibility jar test is recommended before use, incompatibility is indicated by precipitation and/or settling.

Contact LawrieCo / your distributor for further compatibility information

If medical advice is needed, have the product container or label on hand.SAFETY DIRECTIONS Wash hands thoroughly after handling. Dispose of contents/container to an approved waste disposal plant in accordance with local regulations. FIRST AIDIf Swallowed: rinse mouth and give water to drink. If in Eyes: flush with water. If skin or hair contact occurs: wash with water. If any symptoms persist get medical advice/attention or contact a Poisons Information Centre (phone 13 11 26)Additional info refer to Safety Data Sheet

Warning Do not swallow. The spray from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin.Conditions of Sale The Manufacturer/Distributor warrants that this product contains the ingredients specified, and is fit for the purposes stated on this label, when it is used in accordance with directions, under normal conditions. Only the Manufacturer/Distributor is authorised to make any warranty, guarantee or recommendations concerning the product as the location, rate of application and other conditions are beyond the control of the Manufacturer/Distributor.

20kg

Batch

This label complies with the Fertiliser Industry Code of Practice for Fertiliser Description and Labelling20

1710

24

Rate / Ha Timing

Seed Treatment 10L/T seed Increase root length, mass, shoot growth

Foliar Additional applications can be made prior to or following stress periods such as frost or drought

Cereals 3-10 L Tillering (GS 20-29) ~ stem elongation (GS 30-31) ~ Booting (GS 40-49)

Canola 3-10 L 4-6 leaf stage (Mid Rosette) ~ repeat as required

Legumes (Beans/Peas/Lupins) 3-10 L 4-6 leaf (2nd-3rd node with sufficient leaf

area) ~ Pre-flowering

Pasture 3-10 L Spray pasture when sufficient leaf area exists

Citrus 5-15 L Early vegetative, 4 week intervals

Vines 5-15 L 4 weeks post budburst ~ pre flowering ~ berries peasize

Potatoes 6-10 L Full leaf emergence ~ Tuber initiation ~ 12-14 days later ~ flowering ~ bulking

Onions/Carrots 6-10 L 2-3 weeks after emergence ~ root enlargement ~ 10-14 day intervals until harvest

Turf 10-25 L 3-4 week intervals from initial growth stage ~ after heavy use ~ late season

Fertigation 10-30 L

Nitrogen (as organic) 0.5% min Potassium (as oxides) 12.4% minPotassium (as organic) 1.7% minSulfur 1.0-2.0% Calcium 0.2-0.5% Magnesium 0.2-0.6%Boron 0.0075%

Iron 0.02% Manganese 0.004%Copper 0.001% Zinc 0.005%Carbon (organic) 20% minpH 10.0-10.5Solubility 100%

KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS

Wealth from SoilLawrieCo www.lawrieco.com.au Ph 08 8260 1134 2A Capelli Road, Wingfield SA 5013

(0.5-0-14-1)

Phosphorus 11%Calcium 29%Silicon 15%Boron 1.5%Fulvic 2.0%

100% Soluble Canadian kelpBiostimulant with a large nutrient range, chelating agents, plant hormones and complex sugars.

Nitrogen 13%Phosphorus 10%Potassium 13%Calcium 0.3%Fulvic 0.5%

Sulphur 9.2%Zinc 6.0%Mang. 8.0%Copper 2.0%Fulvic 1.6%

Nitrogen 10.5%Phosphorus 7.6%Potassium 4.5%Sulphur 0.1%Calcium 3.3%

Post Emergent Range

Soil / Base Applied Foliar Injection Seed / Rootling Dressing

TYPICAL ANALYSIS (w/v)

RECOMMENDATIONS

Rates and timings may change depending on crop and season. Always consult a LawrieCo consultant or distributor for specific recommendations.

N P K + BACKGROUND TRACES, COMLEXED WITH FULVIC ACID AND BIOSTIMULANTSHigh analysis of key plant minerals for yield and quality potential in all crops. N for growth, P for root building, K for fruit sizing. Complexed with Fulvic Acid and Biostimulants to enhance nutrient uptake.

Not applicable to 1000L containers

APPLICATIONAGITATE WELL BEFORE USEConditions of use: Ensure adequate leaf area index for nutrient absorption. Not for use when plant is under stress. e.g. moisture, frost, disease or pests.Spray at moderate ambient temperatures, 11-28 degrees. High humidity will stimulate plant uptake. For best results use early morning or late afternoon.Do not spray in winds > 24 km/h, ideally not over 8 km/hEquipment: Ensure spray equipment is clean, remove undissolved particles that may block nozzles and chemical / disease contaminants prior to use.Water rate 50-100L/ha • 32-50 mesh filtrationDilution rate 1:50 - 1:100 • Nozzle size 3-5Compatibility: Physically compatible with a range of nutrients and chemicals. A compatibility jar test is recommended before use, incompatibility is indicated by precipitation and/or settling. Contact LawrieCo / your distributor for further compatibility information

20L

110L

200L

1000L

Batch

This label complies with the Fertiliser Industry Code of Practice for Fertiliser Description and Labelling20

1511

04

UTRIMAX

Nitrogen 2.7% as ammonium 10.3% as urea 0.22% as organic 13.22% TotalPhosphorous 10.02% as water soluble 0.05% as organic 10.07% TotalPotassium 12.72% as phosphate 0.25% as hydroxide 0.06% as organic 13.03% Total

Sulphur 0.1% as organic Calcium 0.3% as organic Magnesium 0.022% as organic

Fulvic Acid 0.5% as fulvate

pH 7.05-7.35Specific gravity 1.35-1.38

TRIPLE FEED NPK(13-10-13-0)

Rate / Ha Timing

Foliar Apply when a deficiency has been identified by tissue, petiole or SAP analysis

Cereals 3 L Apply prior to flag initiation or as required

Canola 3 L Apply prior to flower bud development or as required

Legumes (Beans/Peas/Lupins) 3 L Apply prior to flowering or if a boost is

required

Pasture 3 L Apply 2-3 weeks after emergence or if a boost is required

Lucerne 3 L Apply 2-3 weeks after emergence or if a boost is required

Tree Crops (Orchards/Citrus) 7 L Apply prior to flowering or at 2-4 weekly

intervals as required

Vines 7 L Apply prior to flowering or at 2-4 weekly intervals as required

Horticulture (Potatoes/Onions/

Carrots) 3-7 L Apply prior to flowering or at 2-4 weekly

intervals as required

Turf 5 L Apply every 2-4 weeks as required

Fertigation 5-30 L Apply at 2-4 weekly intervals as required.

BioMAX Fulvic 1-3 L Optional for increased plant uptake

KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS

If medical advice is needed, have the product container or label on hand.SAFETY DIRECTIONS Wash hands thoroughly after handling. Wear eye protection/face protection (AS/NZS 1336/37). Dispose of contents/container to an approved waste disposal plant in accordance with local regulations. FIRST AIDIf Swallowed: do NOT induce vomiting. Rinse mouth and give plenty of water to drink. If in Eyes: hold eye lids apart and flush continuously with running water for 15 minutes. If skin or hair contact occurs: remove contaminated clothing and wash with plenty of soap and water. If any symptoms persist get medical advice/attention or contact a Poisons Information Centre (phone 13 11 26)Additional info refer to Safety Data Sheet - Code No. 8038IMPURITIES Biuret 0.17 %: 17.0g/kg N; Cadmium 0.8mg/kg, 10.6mg/kg P; Fluorine 188.0mg/kg P;Lead 0.7mg/kg; Mercury 0.1mg/kgWarning This fertiliser contains buiret. Repeated foliar sprays may cause damage to citrus. Warning Do not swallow. The spray from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin.Conditions of Sale The Manufacturer/Distributor warrants that this product contains the ingredients specified, and is fit for the purposes stated on this label, when it is used in accordance with directions, under normal conditions. Only the Manufacturer/Distributor is authorised to make any warranty, guarantee or recommendations concerning the product as the location, rate of application and other conditions are beyond the control of the Manufacturer/Distributor.

Healthy Soil Healthy PeopleManufactured in Australia by LawrieCo www.lawrieco.com.au Ph 08 8260 1134 2A Capelli Road, Wingfield SA 5013

Contact Bill Ambaras - Area Manager

0458 811 222Central and North SA, Riverlandor for further product information visitwww.lawrieco.com.au

Consult a LawrieCo Area Manager or distributor for specific recommendations.