Bristol Series Luminaire - pelcoinc.com · e - aee - 405-340-3434 - a 405-340-3435 Page T15-3 LT...
Transcript of Bristol Series Luminaire - pelcoinc.com · e - aee - 405-340-3434 - a 405-340-3435 Page T15-3 LT...
Page T15-1www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Note: 1. See Reference Section for available paint colors. 2. Retrofit Kits are available to easily convert Pelco’s exisitng Bristol Luminaires to LED.
10/11/17
AP- - - - - - - - - P_ _=PaintWattage Voltage Globe Finial/
ColorTenonAdapter
Photocell Rib/Color
Model
AP-0207- Bristol High Pressure SodiumAP-0208- Bristol Metal HalideAP-7520- Bristol LED
The Bristol Luminaires are available in metal halide, high pressure sodium, or LED and provide the look and charm of history. A unique modular electrical unit provides easy access for service. The Bristol Luminaire can be customized for a personalized style and requirement by selecting various options as indicated below.
AP-0207 HPS AP-0208 MH AP-7520 LED
50HPS 50MH 37W
100HPS 100MH 57W
150HPS 150MH -
250HPS 250MH -
Wattage:
AP-0207 HPS AP-0208 AP-7520 LED
120V 120V UNV
240V 240V UNV
277V 277V UNV
480V 480V -
Voltage:
Note: All LED Luminaires are 120-277V
AP-0207 HPS AP-0208 MH AP-7520 LED
NPC NPC NPC
PCS PCS 7P
PC PC PC
Photocell:
None
Socket Only
w/ Photocell
AP-0207 HPS AP-0208 MH AP-7520
PLSM PLSM -
PLLG PLLG PLLG
T3AC T3AC T3AC
T5AC T5AC T5AC
T3ACPR T3ACPR -
T5ACPR T5ACPR -
T3ACSR T3ACSR -
T5ACSR T5ACSR -
T3DS59 T3DS59 T3DS
T5DS59 T5DS59 T5DS
Globe:
Polycarbonate Large
Type III Acrylic
Type V Acrylic
Type III Acrylic, Perforated Reflector
Type V Acrylic, Perforated Reflector
Type III Acrylic, Solid Reflector
Type V Acrylic, Solid Reflector
Type III Acrylic, Dark Sky, Color
Type V Acrylic, Dark Sky, Color
Note: 59 refers to P59 Textured Black, others colors available
AP-0207 HPS AP-0208 MH AP-7520 LED
TA TA TA
Tenon Adapter:
Note: Adapter 2-7/8” OD post to 3-1/2” ID fixture
AP-0207 AP-0208 AP-7520
BL59 BL59 BL59
ST59 ST59 ST59
SI59 SI59 SI59
FL59 FL59 FL59
Finial/Color:
3” Ball, Color
Steeple, Color
Spire, Color
Fleur, Color
Note: 59 refers to P59 Textured Black, others colors available
AP-0207 AP-0208 AP-7520
T59 T59 T59
TO59 TO59 TO59
S59 S59 S59
SO59 SO59 SO59
Ribs/Color:
Tall, Color
Tall Open, Color
Short, Color
Short Open, Color
Notes: 59 refers to P59 Textured Black, others colors available Decorative Ribs not available on small poly globe.
Tall Tall Open Short Short Open
3” Ball Steeple Spire Fleur
Bristol Series Luminaire
Note: All LED Luminaires use 7-pin socket
Acrylic Globe
34.6”
Polycarbonate Globew/ Decorative Ribs
36”
Page T15-2 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SAP- - - - - - P_ _=PaintWattage Voltage Photocell Finial/
ColorModel
The Windsor Luminaires are available in metal halide, high pressure sodium, or LED. The carriage type luminaires are antique in appearance with a modular electrical unit for easy service access. The lighting panels have unique photometrics that give the appearance of multiple light sources. The Windsor Luminaire can be customized by selecting various options as indicated below.
AP-0216- Windsor High Pressure SodiumAP-0217- Windsor Metal HalideAP-7521- Windsor LED
3” Ball Steeple Spire Fleur
AP-0216 AP-0217 AP-7521
50HPS - 37W
100HPS 100MH 57W
- 150MH -
- 175MH -
Wattage:
AP-0216 AP-0217 AP-7521
120V 120V UNV
208V 208V UNV
240V 240V UNV
277V 277V UNV
480V 480V 480V
Voltage:
Note: All LED Luminaires are 120-277V
AP-0216 AP-0217 AP-7521
NPC NPC NPC
PCS PCS 7P
PC PC PC
Photocell:
None
Socket Only
w/ Photocell
AP-0216 AP-0217 AP-7521
BL59 BL59 BL59
ST59 ST59 ST59
SI59 SI59 SI59
FL59 FL59 FL59
Finial/Color:
3” Ball, Color
Steeple, Color
Spire, Color
Fleur, Color
Note: 59 refers to P59 Textured Black, others colors available
Windsor Series Luminaire
Note: 1. See Reference Section for available paint colors. 2. Retrofit Kits are available to easily convert Pelco’s exisitng Windsor Luminaires to LED.
10/11/17
Note: All LED Luminaires use 7-pin socket
31.3”
Page T15-3www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SLexington Series Luminaire
AP-7523- Lexington High Pressure SodiumAP-7523- Lexington Metal HalideAP-7524- Lexington LED
The Lexington LED Luminaire has a simple elegant style, yet brings a state-of-the-art photometric and maintenance technology to a unit reminiscent of the 19th century. The Lexington Luminaire is designed for use with a 2-3/8” diameter arm and can be customized by selecting various options as indicated below.
Note: 1. Custom colors may be available. Contact Pelco for specifics.
4/15/19
AP- - - - - - - - - OpticsWattage Color Temp Photocell P_ _=PaintShadeVoltageLEDModel
AP-7501
SHA
Shade:
Spun Aluminum Shade
AP-7501
P59
Paint:
Textured Black Powder Coat
AP-7523 AP-7523 AP-7524
250HPS 250MH 97W-3LED
Wattage:
AP-7523 AP-7523 AP-7524
120V 120V UNV
208V 208V UNV
240V 240V UNV
277V 277V UNV
480V 480V 480V
Voltage:
Note: All LED Luminaires are 120-277V
AP-7523 AP-7523 AP-7524
PC (3 pin) PC (3 pin) PC (7 pin)
SC SC SC
PCS (3 pin) PCS (3 pin) PCS (7 pin)
Photocell:
Photocell
Shorting Cap
w/ Photocell
AP-7523 AP-7523 AP-7524
T3DS59 T3DS59 T3DS
Optics:
Type III Acrylic
AP-7523 AP-7523 AP-7524
- - 4K
Color Temp:
4500 Kelvin
Decorative Finial & Twistlock Photocell
35”
17”Decorative Finial &
Spun Aluminum Shade
37”
7”
Page T15-4 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Note: 1. See Reference Section for available paint colors. 2. Retrofit Kits are available to easily convert Pelco’s exisitng Bristol Luminaires to LED. 3. Mounting hardware not included.
AP- - - - - - - - P_ _=PaintWattage Voltage Globe Finial/
ColorPhotocell Rib/
ColorModel
AP-0378- Bristol High Pressure SodiumAP-0367- Bristol Metal HalideAP-7522- Bristol LED
The Bristol Wall Mount Luminaires are available in metal halide, high pressure sodium, or LED and provide the look and charm of history. A unique modular electrical unit provides easy access for service. The Bristol Luminaire can be customized for a personalized style and requirement by selecting various options as indicated below.
Wattage:
Tall Tall Open Short Short Open
3” Ball Steeple Spire Fleur
Bristol Series Wall Mount Luminaire
4/15/19
AP-0378 AP-0367 AP-7522
50HPS 50MH 37W
100HPS 100MH 57W
150HPS 150MH -
250HPS 250MH -
AP-0378 AP-0367 AP-7522
120V 120V UNV
240V 240V UNV
277V 277V UNV
480V 480V -
Voltage:
Note: All LED Luminaires are 120-277V
AP-0378 AP-0367 AP-7522
NPC NPC NPC
PCS PCS 7P
PC PC PC
Photocell:
None
Socket Only
w/ Photocell
AP-0378 AP-0367 AP-7522
PLSM PLSM -
PLLG PLLG PLLG
T3AC T3AC T3AC
T5AC T5AC T3AC
T3ACPR T3ACPR -
T5ACPR T5ACPR -
T3ACSR T3ACSR -
T5ACSR T5ACSR -
T3DS59 T3DS59 T3DS
T5DS59 T5DS59 T3DS
Globe:
Polycarbonate Small
Polycarbonate Large
Type III Acrylic
Type V Acrylic
Type III Acrylic, Perforated Reflector
Type V Acrylic, Perforated Reflector
Type III Acrylic, Solid Reflector
Type V Acrylic, Solid Reflector
Type III Acrylic, Dark Sky, Color
Type V Acrylic, Dark Sky, Color
Note: 59 refers to P59 Textured Black, others colors available
AP-0378 AP-0367 AP-7522
BL59 BL59 BL59
ST59 ST59 ST59
SI59 SI59 SI59
FL59 FL59 FL59
Finial/Color:
3” Ball, Color
Steeple, Color
Spire, Color
Fleur, Color
Note: 59 refers to P59 Textured Black, others colors available
AP-0378 AP-0367 AP-7522
T59 T59 T59
TO59 TO59 TO59
S59 S59 S59
SO59 SO59 SO59
Ribs/Color:
Tall, Color
Tall Open, Color
Short, Color
Short Open, Color
Note: 59 refers to P59 Textured Black, others colors available
Note: All LED Luminaires use 7-pin socket
Page T15-5www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
4/15/19
Existing Bristol, Windsor, or Renassaince Luminaires can easily be converted to LED by replacing the electrical modules with LED Retrofit Kits.
LED Luminaire Retrofits
Note: 1. See Reference Section for available paint colors.
Bristol LED Retrofit Kit, Alum
AP-0655 - - - -Wattage
37W=37 Watt57W=57 Watt
Voltage
UNV=120-277V
PhotocellSocket
NPC=None7P=7-Pin Socket
Coating
PNC=Process No ColorP_ _=Paint
Renaissance LED Retrofit Kit, Alum
AP-0656 - - - -Wattage
80W=80 Watt
Voltage
120V=120 Volt
Photocell
NPC=None
Coating
PNC=Process No Color
Bristol LED Retrofit Kit w/ Top Plate for 7-PinAlum
AP-0657 - - - -Wattage
37W=37 Watt57W=57 Watt
Voltage
UNV=120-277V
Coating
PNC=Process No ColorP_ _=Paint
PhotocellSocket
NPC=None7P=7-Pin Socket
Windsor LED Retrofit Kit, Alum
AP-0658 - - - -Wattage
37W=37 Watt57W=57 Watt
Voltage
UNV=120-277V
Coating
PNC=Process No Color
PhotocellSocket
NPC=None7P=7-Pin Socket
Page T15-6 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Pelco’s twin arms can be mounted to a fluted or tapered pole. The twin arms and wall mount can accommodate the Bristol or Windsor luminaire and are available with a variety of finials. Pelco’s decorative column mount is availiable with an optional collar for additional ornamentation.
Arms, Column, and Wall Mounts
Twin Arm Assy, Fits 2-7/8” Pole Tenon, Alumw/ 3-1/2” Luminaire Tenons, 33” CTC
AP-8203 - - Finial/Color
BL_ _=2” BallSI_ _=SpireSE_ _=SteepleFL_ _=Fleur
Paint
P_ _=Paint
Twin Arm Assy, Fits 2-7/8” Pole Tenon, Alumw/ 3-1/2” Luminaire Tenons, 35” CTC
AP-8374 - - Finial/Color
BL_ _=2” BallSI_ _=SpireSE_ _=SteepleFL_ _=Fleur
Paint
P_ _=Paint
Wall Mount Arm Assy, Alum16-1/2” Offset from Wall
2” Ball Steeple Spire Fleur
AP-8230 - - - Finial/Color
BL_ _=2” BallSI_ _=SpireSE_ _=SteepleFL_ _=Fleur
Paint
P_ _=Paint
Tenon
2.8=2-13/16” OD3.5=3-1/2” OD
Column Mount, Alumw/ 3-1/2” Luminaire Tenon8-1/2” Bolt Circle for 1/2” Hardware
AP-8195 - - Collar
Blank=No Collar OC=Ornamental Collar
Paint
P_ _=Paint
Note: 1. See Reference Section for available paint colors. 2. Mounting hardware not included.
4/15/19
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e., AP-8203-BL28-P59, for Gold Ball finial and Textured Black assembly.
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e., AP-8374-BL28-P59, for Gold Ball finial and Textured Black assembly.
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e., AP-8230-BL28-P59, for Gold Ball finial and Textured Black assembly.
2” Ball Steeple Spire Fleur
2” Ball Steeple Spire Fleur
AP-8195-OC
10.7”
1.6”
11.6”
Page T15-7www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
AP-0810Hamilton
AP-0803Rochester
PB-5416Octagonal
AP-0820Huntington
AP-0811CountryClub
AP-0814LeGrande
AP-0801OldTowne I
Pelco manufactures a variety of Lighting Poles, straight, fluted, and tapered, that are available for post top mounted luminaires. Poles vary in size, shape, height, and material, and are designed to fit any requirement.
Post Top Luminaire Poles
AP-0817Oxford
AP-0804Old Towne I
Light Pole, 3-1/2” OD Steelw/ Hand Hole
AP-0220 - -Coating
P_ _=Paint
Height
05=5’08=8’10=10’12=12’14=14’
Aluminum Bases:
ABS Bases: Anchors:
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
Light Pole, 3-1/2” OD Steelw/ GFCI Option
AP-0376 - - -Coating
P_ _=Paint
Height GFCI
Blank=w/o KitGFCI=w/ Kit
05=5’08=8’10=10’12=12’14=14’
AP-1046-GLVAnchor Bolts Set,
1/2”-13NC
AP-1049-GLVAnchor Bolt Cage,
1/2”-13NC
4/15/19
10”
5.56”5.5”Bolt Circle
2.38” x 3.5”Hand Hole
LC
32.2”
5.56”5.5”Bolt Circle
3.5” x 5.4”GFCI Housing
LC
Page T15-8 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Pelco manufactures a variety of Lighting Poles, straight, fluted, and tapered, that are available for post top mounted luminaires. Poles vary in size, shape, height, and material, designed to fit any need.
Post Top Luminaire Poles
AP-0810Hamilton
AP-0803Rochester I
Aluminum Bases:
ABS Bases:
Coating
P_ _=Paint
Anchors:
AP-1046-GLVAnchor Bolts Set,
1/2”-13NC
AP-1049-GLVAnchor Bolt Cage,
1/2”-13NC
AP-0811CountryClub
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
Light Pole, 3-1/2” OD Steelw/ Lower GFCI Option
AP-0302 - - -Height GFCI
Blank=w/o KitGFCI=w/ Kit
05=5’08=8’10=10’12=12’14=14’
6.44”
5.56”5.5”Bolt Circle
3.5” x 5.4”GFCI Housing
LC
Page T15-9www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SPelco manufactures a variety of Lighting Poles, straight, fluted, and tapered, that are available for post top mounted luminaires. Poles vary in size, shape, height, and material, designed to fit any need.
Post Top Luminaire Poles
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
Light Pole, 4” Fluted, Alumw/ 3-1/2” OD x 2-7/8” Long Tenon,w/ Hand Hole & Grounding Lug
AP-8468 - - Coating
P_ _=Paint
Height
15=15’18=18’20=20’
Light Pole, 4” Fluted, Alumw/ 3-1/2” OD x 2-7/8” Long Tenon,w/ Hand Hole & Grounding Lug
AP-8122 - - Coating
P_ _=Paint
Height
10=10’12=12’14=14’
AP-0814LeGrande
AP-0816Hamilton
AP-0817Oxford
Aluminum Bases:
Anchors:
PB-5414Octagonal
AP-1019-GLVAnchor Bolts Set,
3/4”-10NC
AP-1089-GLV Anchor Bolt Cage,
3/4”-10NC
AP-0819Manchester
7.5”
12.5”7.88”-13”Bolt Circle
2” x 4”Hand Hole
LC
7.5”
12.5”7.88”-13”Bolt Circle
2” x 4”Hand Hole
LC
Page T15-10 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
4/15/19
This page is intentionally left blank.
Page T15-11www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SPelco manufactures a variety of Lighting Poles, straight, fluted, and tapered, that are available for post top mounted luminaires. Poles vary in size, shape, height, and material, designed to fit any need.
Post Top Luminaire Poles
ABS Bases:
AP-0810-5.81-13.13Hamilton
AP-0809-5.63-13.13Rochester II(w/o GFCI)
Aluminum Bases:
AP-0817-6FOxford
Light Pole, Fluted Tapered, Steelw/ 3-1/2” OD x 3-1/2” Long Tenon,GFCI Option
AP-8700 - - - Coating
GLV=GalvanizedP_ _=Paint
Height GFCI
Blank=w/o KitGFCI=w/ Kit
8=8’10=10’
Anchors:
AP-1019-GLVAnchor Bolts Set,
3/4”-10NC
AP-1089-GLV Anchor Bolt Cage,
3/4”-10NC
AP-0816-5.75Hamilton
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
5.00”
10”8.5”-10.5”Bolt Circle
2.5” x 5”Hand Hole
LC
AP-0819-5.75Manchester
AP-0814-5.63LeGrande(w/o GFCI)
Page T15-12 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SAP-0819-5.00Manchester
AP-0817-5.25Oxford
AP-0816-5.00Hamilton
AP-0811-5.00Country Club
Pelco manufactures a variety of Lighting Poles, straight, fluted, and tapered, that are available for post top mounted luminaires. Poles vary in size, shape, height, and material, designed to fit any need.
Post Top Luminaire Poles
Direct Bury Light Pole, Tapered Steel, 11 Gauge, 5.8” Butt x 19’ Tall3-1/2” OD x 3” Long Tenon, w/ Hand Hole Cover & Grounding Lug
AP-3056 -Coating
P_ _=Paint
GroundLevel
AP-0814-4.88LeGrande
Aluminum Bases:
ABS Bases:
AP-0803-4.88-5.63Rochester I
AP-0809-4.88-5.63Rochester II
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25.
4/15/19
5.8” Butt Dia
GroundLevel
3” x 5”Hand Holew/ Cover
48” Embed
18”LC
Page T15-13www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
AP-0819-6.69Manchester
Pelco manufactures a variety of Lighting Poles, straight, fluted, and tapered, that are available for post top mounted luminaires. Poles vary in size, shape, height, and material, designed to fit any need.
Post Top Luminaire Poles
AP-0817-6.88Oxford
AP-0816-6.75Hamilton
Direct Bury Light Pole, Tapered Steel, 11 Gauge, 7.5” Butt x 25’ Tall3-1/2” OD x 3” Long Tenon, w/ Hand Hole Cover & Grounding Lug
AP-3057 -Coating
P_ _=Paint
7.5” Butt Dia
GroundLevel
Aluminum Bases:
ABS Bases:
AP-0809-6.56-7.25Rochester II
AP-0802-6.63Ornamental
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25.
4/15/19
GroundLevel
3” x 5”Hand Holew/ Cover
48” Embed
18”LC
Page T15-14 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
AP-0816-7.75Hamilton(Standard)
The Majestic Roadway Lighting Poles are available for single or twin luminaires and with 6’ or 8’ arms fabricated with a 29” rise. The fluted tapered steel pole offers great strength and durability, with the Hamilton base completing the classic decorative look.
Majestic Roadway Luminaire Poles
Anchors:
AP-0823-7.75Hamilton w/ Riser(Optional)
AP-1007-3-GLVAnchor Bolts Set,
1”-8NCw/ Template
AP-3129-GLVAnchor Bolt Cage,
1”-8NC
PB-5372-GLV6” Foundation
Anchor
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
Pole Height
Arm Length
ArmPart
Number
Allowable EPA (ft^2) per arm at90 mph with max. luminaire weight of
60 lbs
Allowable EPA (ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
30’-0”6’-0” Single AP-8327 7.0 5.6
8’-0” Single AP-8347 4.6 3.6
Note:Majestic Poles come standard with Hamilton Base, for optional Hamilton Base w/ Riser specify by adding -BR in the part number, i.e., AP-8327-BR-P59EPA=Projected area of luminaire multiplied by coefficient of dragCompliant with AASHTO 2013
15”
12”11”-12”Bolt
Circle
3” x 5”Hand Holew/Cover
20.5”to
Flutes
LC
Aluminum Bases:
Page T15-15www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SThe Majestic Roadway Lighting Poles are available for single or twin luminaires and with 6’ or 8’ arms fabricated with a 29” rise. The fluted tapered steel pole offers great strength and durability, with the Hamilton base completing the classic decorative look.
Majestic Roadway Luminaire Poles
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
Note:Majestic Poles come standard with Hamilton Base, for optional Hamilton Base w/ Riser specify by adding -BR in the part number, i.e., AP-8347-BR-P59EPA=Projected area of luminaire multiplied by coefficient of dragCompliant with AASHTO 2013
Pole Height
Arm Length
ArmPart
Number
Allowable EPA (ft^2) per arm at90 mph with max. luminaire weight of
60 lbs
Allowable EPA (ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
30’-0”6’-0” Single AP-8328 7.0 5.6
8’-0” Single AP-8348 4.6 3.6
AP-0816-7.75Hamilton(Standard)
Anchors:
AP-0823-7.75Hamilton w/ Riser(Optional)
AP-1007-3-GLVAnchor Bolts Set,
1”-8NCw/ Template
AP-3129-GLVAnchor Bolt Cage,
1”-8NC
PB-5372-GLV6” Foundation
Anchor
15”
12”11”-12”Bolt
Circle
3” x 5”Hand Holew/Cover
20.5”to
Flutes
LC
Aluminum Bases:
Page T15-16 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Traditional Roadway Luminaire Poles
Anchors:
AP-1007-3-GLVAnchor Bolts Set,
1”-8NCw/ Template
AP-3129-GLVAnchor Bolt Cage,
1”-8NC
AP-0816-7.81Hamilton AP-0817-8.00
OxfordAP-0802-7.75Ornamental
Aluminum Bases:
PB-5384-7.69Rochester
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
Pole Height
Arm Length
ArmPart
Number
Allowable EPA (ft^2) per arm at90 mph with max. luminaire weight of
60 lbs
Allowable EPA (ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
22’-6” 8’-0” Single AP-8489 5.0 3.9
25’-0” 8’-0” Single AP-8556 4.8 3.8
30’-0” 8’-0” Single AP-8301 4.6 3.6
Note:Bolt/Nut Covers are available. Specify by adding -BC in the part number, i.e., AP-8301-BC-P59EPA=Projected area of luminaire multiplied by coefficient of dragCompliant with AASHTO 2013
The Traditional Roadway Luminaire Poles are available in 22-1/2’, 25’, and 30’ heights. They are provided with either 6’ or 8’ single or twin arms, fabricated with a 26” rise. The steel tapered poles offer an affordable graceful look that can accept a variety of decorative bases or be provided with simple nut covers.
15”
12”11”-12”Bolt Circle
3” x 5”Hand Holew/ Cover
LC
PB-5372-GLV6” Foundation
Anchor
Page T15-17www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
STraditional Roadway Luminaire Poles
Anchors:
AP-1007-3-GLVAnchor Bolts Set,
1”-8NCw/ Template
AP-3129-GLVAnchor Bolt Cage,
1”-8NC
AP-0816-7.81Hamilton AP-0817-8.00
OxfordAP-0802-7.75Ornamental
Aluminum Bases:
PB-5384-7.69Rochester
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
4/15/19
Pole Height
Arm Length
ArmPart
Number
Allowable EPA (ft^2) per arm at90 mph with max. luminaire weight of
60 lbs
Allowable EPA (ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
22’-6” 8’-0” Twin AP-8490 5.0 3.9
25’-0” 8’-0” Twin AP-8563 4.8 3.8
30’-0” 8’-0” Twin AP-8302 4.6 3.6
Note:Bolt/Nut Covers are available. Specify by adding -BC in the part number, i.e., AP-8302-BC-P59EPA=Projected area of luminaire multiplied by coefficient of dragCompliant with AASHTO 2013
The Traditional Roadway Luminaire Poles are available in 22-1/2’, 25’, and 30’ heights. They are provided with either 6’ or 8’ single or twin arms, fabricated with a 26” rise. The steel tapered poles offer an affordable graceful look that can accept a variety of decorative bases or be provided with simple nut covers.
15”
12”11”-12”Bolt Circle
3” x 5”Hand Holew/ Cover
LC
PB-5372-GLV6” Foundation
Anchor
Page T15-18 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
The Simplex Roadway Luminaire Poles are available in 25’, 30’, 35’, and 40’ heights. They are provided with either 6’ or 8’ single or twin arms, fabricated with a 24” rise. The steel tapered poles can accept a variety of decorative bases or be provided with simple nut covers.
Simplex Roadway Luminaire Poles
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
Pole Height
Arm Length
ArmPart
Number
Allowable EPA (ft^2) per arm at90 mph with max. luminaire weight of
60 lbs
Allowable EPA (ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
25’-0”6’-0” Single AP-8571-25-6 6.8 5.4
8’-0” Single AP-8571-25-8 4.5 3.5
30’-0”6’-0” Single AP-8571-30-6 6.5 5.2
8’-0” Single AP-8571-30-8 4.3 3.3
35’-0”6’-0” Single AP-8571-35-6 6.3 5.0
8’-0” Single AP-8571-35-8 4.1 3.2
40’-0”6’-0” Single AP-8571-40-6 6.1 4.8
8’-0” Single AP-8571-40-8 4.0 3.1
Aluminum Bases:
PB-5384 Rochester
Pole Height
BaseID
25’ 7.13”
30’ 7.63”
35’ 8.13”
40’ 8.63”
AP-0817 Oxford
Pole Height
BaseID
25’ 7.50”
30’ 8.00”
35’ 8.44”
40’ 9.00”
AP-0802 Ornamental
Pole Height
BaseID
25’ 7.25”
30’ 7.75”
35’ 8.25”
40’ 8.75”
AP-0816 Hamilton
Pole Height
BaseID
25’ 7.31”
30’ 7.88”
35’ N/A
40’ N/A
Note:Bolt/Nut Covers are available. Specify by adding -BC in the part number, i.e., AP-8571-30-6-BC-GLV.EPA=Projected area of luminaire multiplied by coefficient of dragCompliant with AASHTO 2013
4/15/19
Anchors:
AP-1007-3-GLV1”-8NC
(25’ & 30’ Poles)
AP-1020-GLV1-1/4”-7NC(35’ & 40’ Poles)
AP-3129-GLV1”-8NC
(25’ & 30’ Poles)
AP-3146-GLV1-1/4”-7NC(35’ & 40’ Poles)
15”
12”(25’ & 30’ Poles)
13”(35’ & 40’ Poles)
11”-12” BC(25’ & 30’ Poles)
12”-13” BC(35’ & 40’ Poles)
3” x 5”Hand Holew/ Cover
LC
PB-5372-GLV6” Foundation Anchor(25’, 30’, 35’, & 40’ Poles)
Page T15-19www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SSimplex Roadway Luminaire Poles
Aluminum Bases:
Note: 1. See Reference Section for available paint colors. 2. For more indepth information on Bases see page T15-21 through T15-25. 3. For Anchors see sections T11 and T12.
The Simplex Roadway Luminaire Poles are available in 25’, 30’, 35’, and 40’ heights. They are provided with either 6’ or 8’ single or twin arms, fabricated with a 24” rise. The steel tapered poles can accept a variety of decorative bases or be provided with simple nut covers.
4/15/19
Pole Height
Arm Length
ArmPart
Number
Allowable EPA (ft^2) per arm at90 mph with max. luminaire weight of
60 lbs
Allowable EPA (ft^2) per arm at
100 mph with max. luminaire weight of
60 lbs
25’-0”6’-0” Twin AP-8572-25-6 6.8 5.4
8’-0” Twin AP-8572-25-8 4.5 3.5
30’-0”6’-0” Twin AP-8572-30-6 6.5 5.2
8’-0” Twin AP-8572-30-8 4.3 3.3
35’-0”6’-0” Twin AP-8572-35-6 6.3 5.0
8’-0” Twin AP-8572-35-8 4.1 3.2
40’-0”6’-0” Twin AP-8572-40-6 6.1 4.8
8’-0” Twin AP-8572-40-8 4.0 3.1
Note:Bolt/Nut Covers are available. Specify by adding -BC in the part number, i.e., AP-8572-30-6-BC-GLV.EPA=Projected area of luminaire multiplied by coefficient of dragCompliant with AASHTO 2013
PB-5384 Rochester
Pole Height
BaseID
25’ 7.13”
30’ 7.63”
35’ 8.13”
40’ 8.63”
AP-0817 Oxford
Pole Height
BaseID
25’ 7.50”
30’ 8.00”
35’ 8.44”
40’ 9.00”
AP-0802 Ornamental
Pole Height
BaseID
25’ 7.25”
30’ 7.75”
35’ 8.25”
40’ 8.75”
AP-0816 Hamilton
Pole Height
BaseID
25’ 7.31”
30’ 7.88”
35’ N/A
40’ N/A
Anchors:
AP-1007-3-GLV1”-8NC
(25’ & 30’ Poles)
AP-1020-GLV1-1/4”-7NC(35’ & 40’ Poles)
AP-3129-GLV1”-8NC
(25’ & 30’ Poles)
AP-3146-GLV1-1/4”-7NC(35’ & 40’ Poles)
15”
12”(25’ & 30’ Poles)
13”(35’ & 40’ Poles)
11”-12” BC(25’ & 30’ Poles)
12”-13” BC(35’ & 40’ Poles)
3” x 5”Hand Holew/ Cover
LC
PB-5372-GLV6” Foundation Anchor(25’, 30’, 35’, & 40’ Poles)
Page T15-20 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
This page is intentionally left blank.
4/15/19
Page T15-21www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Hamilton Base Assy, Black ABS Plastic21” High x 16-1/8” Base Dia
AP-0810 - - - PNCBottom ID
14.5= 14-1/2”
Top ID
6.5= 6-1/2”
Note: 1. Refer to individual pole pages for cross reference for proper fit of base and pole.
Pelco ABS Plastic Bases are manufactured from an ultraviolet inhibited material that provides protections against U.V. degradation which ensures years of lasting beauty. A variety of styles and sizes are available. Lightweight and easy installation.
ABS Plastic Bases
Rochester II Base Assy, Black ABS Plastic41” High x 19” Across Points
AP-0809 - - - PNC Top ID
9.0=9”
Bottom ID
15.0=15”
Old Town I Base Assy, Black ABS Plastic25” High x 9-1/4” Points
AP-0804 - - - PNC Top ID
3.5=3-1/2”
Bottom ID
7.5=7-1/2”
Rochester I Base Assy, Black ABS Plastic41” High x 15-11/16” Across Points
AP-0803 - - - PNC Top ID
5.75=5-3/4”
Bottom ID
12.0=12”
Note: Top Opening: 3-1/2” max Bottom Opening: 7-1/2” max
Note: Top Opening: 5-3/4” max Bottom Opening: 12” max
Note: Top Opening: 9” max Bottom Opening: 15” max
Note: Top Opening: 6-1/2” max Bottom Opening: 14-1/2” max
4/15/19
Page T15-22 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SOld Town I Base Assy, Alum23-1/2” High x 9-1/4” Across Points
AP-0801 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
2.38=2-3/8”2.88”=2-7/8”3.5=3-1/2”
Country Club Base Assy, Alum28” High x 13-5/8” OD
AP-0811 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
3.5=3-1/2”4.5=4-1/2”3F= 3” Fluted
Oxford Base Assy, Alum9” High x 19-1/4” Across Points
AP-0817 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
8.5= 8-1/2” 4F=4” Fluted 6F=6” Fluted
Note: 1. See Reference Section for available paint colors. 2. Refer to individual pole pages for cross reference for proper fit of base and pole.
Pelco has several different Aluminum Base designs. A variety of styles and sizes are available to fit any specific requirement.
Aluminum Bases
Note: Top Opening: 2-3/8” min to 3-1/2” max Bottom Opening: 7-1/2” max
Note: Top Opening: 3-1/2” min to 4-1/2” max Bottom Opening: 12” max
Note: Top Opening: 3-1/2” min to 8-1/2” max Bottom Opening: 17” max
4/15/19
Page T15-23www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S Huntington Base Assy, Alum15-3/4” High x 11-1/4” OD
AP-0820 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
3.5=3-1/2” 4.0=4”
Manchester Base Assy w/ Door, Alum27” High x 18-1/2” OD
AP-0819 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
4.0=4” 7.0=7”4F=4” Fluted
Note: 1. See Reference Section for available paint colors. 2. Refer to individual pole pages for cross reference for proper fit of base and pole.
Pelco has several different Aluminum Base designs. A variety of styles and sizes are available to fit any specific requirement.
Aluminum Bases
LeGrande Base Assy, Alum38” High x 18-1/2” OD
AP-0814 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
3.5=3-1/2”4.5=4-1/2”5.5=5-1/2”3F= 3” Fluted4F=4” Fluted
Note: Top Opening: 3” min to 4” max Bottom Opening: 10-3/4” max
Note: Top Opening: 3” min to 7” max Bottom Opening: 11-1/2” max
Note: Top Opening: 3-1/2” min to 5-3/4” max Bottom Opening: 17” max
4/15/19
Page T15-24 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Pelco has several different Aluminum Base designs. A variety of styles and sizes are available to fit any specific requirement.
Aluminum Bases
Octagonal Base Assy, Alum14-3/16” High x 17-13/16” Across Points
PB-5416 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
2.88=2-7/8” 3.5=3-1/2” 4=4” 4.5=4-1/2” 5= 5”
Octagonal Base Assy, for 4” Fluted Pole, Alum14” High x 17-13/16” Across Points
PB-5414 - Coating
PNC=Process No ColorP_ _=Paint
Hamilton Base Assy, Alum24” High x 18-1/2” OD
AP-0816 - -Coating
PNC=Process No ColorP_ _=Paint
Base ID
4.06=4-1/16”4.5=4-1/2”5.5=5-1/2”8.5=8-1/2” (max)
Note: Top Opening: 4” min to 8-1/2” max Bottom Opening: 16-3/4” max
Note: Top Opening: 2-7/8” min to 5” max Bottom Opening: 16” max
Note: Top Opening: 4” Fluted Only Bottom Opening: 16” max
Hamilton Base Assy, Alum31-1/4” High x 18-1/2” OD
AP-0823 - -Coating
PNC=Process No ColorP_ _=Paint
Base ID
4.06=4-1/16”4.5=4-1/2”5.5=5-1/2”8.5=8-1/2” (max)
Note: Top Opening: 4” min to 8-1/2” max Bottom Opening: 16-3/4” max
Note: 1. See Reference Section for available paint colors. 2. Refer to individual pole pages for cross reference for proper fit of base and pole.
4/15/19
Page T15-25www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Square Cover Assy, 2-Piece, Alum5-1/4” High x 16” Square
PB-5399 - - Coating
PNC=Process No ColorP_ _=Paint
Base ID
4.5=4-1/2”6.8=6-13/16”7.5=7-1/2”8.0=8-1/2”
Rochester Base Assy, Alum36” High x 28” Across Points
Ornamental Base Assy, Alum32” High x 28-3/4” Across Points
PB -5384 - -Coating
PNC=Process No ColorP_ _=Paint
Base ID
8.0=8”10.63=10-5/8”14.13=14-1/8” 16”= 16”
AP-0802 - - -Coating
PNC=Process No ColorP_ _=Paint
Base ID
8.0=8”10.0=10”12.0= 12”
Trim
T_ _=Trim Color
Pelco has several different Aluminum Base designs. A variety of styles and sizes are available to fit any specific requirement.
Aluminum Bases
Note: Top Opening: 8” min to 16” max Bottom Opening: 26” max
Note: Top Opening: 6” min to 12” max Bottom Opening: 23” max
Note: Top Opening: 4-1/2” min to 8-5/8” max Bottom Opening: 15” max
Note: 1. See Reference Section for available paint colors. 2. Refer to individual pole pages for cross reference for proper fit of base and pole.
4/15/19
Page T15-26 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
4/15/19
Lumi-Brac, Adjustable View 2-3/8” OD Tenon Mount, Alum
SP-6350 - - Tenon
Blank= 1-5/8” OD x 4” 1.9=1-7/8” OD x 7” 2.38=2-3/8” OD x 7”
Note:For mounting a single security light or Wi Fi antenna.
Lumi-Brac, 1-5/8” Dia Tenon, Adjustable ViewCable Mount, Alum
Note:For mounting a single security light or Wi Fi antenna.Cable Length: 62”, 84”, 96”, 110”, 120”, 132”, 144”, 220”, or 280”.
45°
45°
4”
4”
Pelco manufactures a variety of Lighting Arms that are available for single or twin luminaires. Both 1-5/8” and 2-3/8” diameter arms are availble in aluminum and steel.
Lighting Arms
Note: 1. See Reference Section for available paint colors. 2. See Reference Section page iv for cable clamp kit pole diameters.
SP-6351 - - -Coating
PNC= Process No ColorP_ _=Paint
See Note
CableLength Cable
Blank=Galv SS=Stainless
45°
45°
For 2-3/8” Tenon
Lumi-Brac, 1-5/8” Dia Tenon, Adjustable ViewSimplex Mount, Alum
Note:For mounting a single security light or Wi Fi antenna.
SP-6353 - Coating
PNC= Process No ColorP_ _=Paint
4”45°
45°
Coating
PNC= Process No ColorP_ _=Paint
Page T15-27www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SPelco manufactures a variety of Lighting Arms that are available for single or twin luminaires. Both 1-5/8” and 2-3/8” diameter arms are availble in aluminum and steel.
Lighting Arms
Mounting Bracket Assy, Double Luminaire Arm, 2-3/8” Dia, Galvanized Steel
SP-6308 - Coating
GLV= GalvanizedP_ _=Paint
Note:Bullhorn mounting brackets mount with an offset from the wood pole. Includes rubber grommet on the underneath side for wiring. Mounting hardware not included.
Grommet
Note: 1. See Reference Section for available paint colors.
4/15/19
13” 31”
13.8”
Page T15-28 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Pelco manufactures a variety of Lighting Arms that are available for single or twin luminaires. Both 1-5/8” and 2-3/8” diameter arms are availble in aluminum and steel.
Lighting Arms
Luminaire Support Arm, 1-5/8” Dia,Upsweep, Galvanized Steel
SP-6272 - Coating
GLV= GalvanizedP_ _=Paint
Note:For mounting a single security light or Wi Fi antenna.Mounting hardware not included.
Luminaire Mounting Arm, 1-5/8” Diaw/ Hardware, 1-5/8” Dia, Alum
Note:For mounting a single security light or Wi Fi antenna.Includes three 3/8”-16 x 3” hex head lag bolts and flat washers.
SP-6348 - - Arm Length
16=16”24=14”30=30”
Coating
PNC=Process No ColorP_ _=Paint
Note: 1. See Reference Section for available paint colors.
4/15/19
SP-6349-GLV
Mounting Arm Assy, Flood Light,2-3/8” OD, Galvanized Steel
Note:Mounting arm with a 2-3/8” OD pipe for mounting a single flood light with the 3/4”-10NC supplied hardware.
25.5”
12”
16.9”24.9”30.9”
11.5”
20.5”
23”
PartNumber
EPA (ft^2) per arm at 120 mph with max. lumi-
naire weight of 30 lbs
SP-6348-16-PXX 3.0
SP-6348-24-PXX 2.0
SP-6348-30-PXX 3.6
Page T15-29www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Luminaire Arm, Clamp-on for 4”-5” Dia Pole2-3/8” Dia x 8” Tenon, 30” Rise, Steel
AP-3001 - - Arm Length
72=6’ 96=8’120=10’144=12’
Coating
GLV=GalvanizedP_ _=Paint
Luminaire Arm, Clamp-on for 5-1/2” to 7-1/2” Dia Pole2-3/8” Dia x 8” Tenon, 30” Rise, Steel
AP-3002 - - Arm Length
96=8’120=10’144=12’180=15’
Coating
GLV=GalvanizedP_ _=Paint
Pelco manufactures a variety of Lighting Arms that are available for single or twin luminaires. Both 1-5/8” and 2-3/8” diameter arms are availble in aluminum and steel.
Lighting Arms
Note:For mounting a single luminaire onto the 2-3/8” OD x 8” long tenon. Includes 1/2”-13NC hardware for attaching arm to the pole. Galvanized or powder coated.
Note: 1. See Reference Section for available paint colors.
4/15/19
SP-6309 -
Luminaire Mounting Arm, 2-3/8” OD54” Rise, Galvanized Steel
Note:For mouting a single luminaire on 2-3/8” OD x 6’ schedule 10 pipe with a 54” rise. Mounting hardware not included. Galvanized or powder coated.
Coating
GLV=GalvanizedP_ _=Paint
Page T15-30 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Light shields are mounted to the luminaire to prevent unwanted light enchroachment. Available in a natural aluminum color or painted to match the luminaire.
Light Shields
Light Shield, House Side for Mogul Socket, 2-1/4” Dia, Alum
AP-8433 - Coating
PNC= Process No ColorP_ _=Paint
Light Shield, Security, Alum
SP-6013 - Coating
PNC= Process No ColorP_ _=Paint
Note:Clamps onto the mogul base socket in the HID Bristol luminaire preventing unwanted light encroachment.
Note:Easily snaps onto most HID security lights preventing unwanted light encroachment.
Note: 1. See Reference Section for available paint colors.
4/15/19
Page T15-31www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SPelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole when not in use.
Banner Brackets
Banner Mounting Bracket, AlumHinged Single Arm,
SH-3551 - - - -Pole Dia
2.38=2-3/8”2.88=2-7/8”3.50=3-1/2”4.06=3” Fluted4.50=4-1/2”5.08=4” Fluted5.56=5-9/16”
Banner Width
18=18”24=24”30=30”36=36”
Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
Banner Mounting Bracket, AlumHinged Double Arm,
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3556-3.50-24-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.
SH-3556 - - - - -Pole Dia
2.38=2-3/8”2.88=2-7/8”3.50=3-1/2”4.06=3” Fluted4.50=4-1/2”5.08=4” Fluted5.56=5-9/16”
Banner Width
18=18”24=24”30=30”36=36”
Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
Banner Width
18=18”20=21”24=24”30=30”36=36”
Banner Mounting Bracket, AlumHinged Articulating Single Arm
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3547-3.50-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.
Pole Dia
2.38=2-3/8”2.88=2-7/8”3.50=3-1/2”4.06=3” Fluted4.50=4-1/2”5.08=4” Fluted5.56=5-9/16”
SH-3547 - - - -Banner Width
18=18”24=24”30=30”36=36”
Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
3” Ball Steeple Spire Fleur Spear
3” Ball Steeple Spire Fleur Spear
3” Ball Steeple Spire Fleur Spear
Note: 1. See Reference Section for available paint colors.
4/15/19
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3551-3.50-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.
Page T15-32 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SBanner Mounting Bracket, AlumBand Mini-Brac
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3520-42PB-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.If painted band is required, band will be painted same color as assembly.
SH-3520 - - - -BandLength/Painted
29=29” 42=42”29PB=29” Painted42PB=42” Painted
Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
Banner Width
18=18”24=24”30=30”36=36”
Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole when not in use.
Banner Brackets
Banner Mounting Bracket, AlumBand Mini-Brac, Articulating Arm
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3551-3.50-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.If painted band is required, band will be painted same color as assembly.
SH-3525 - - - -Band Length/Painted
29=29” 42=42”29PB=29” Painted42PB=42” Painted
Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
Banner Width
18=18”24=24”30=30”36=36”
3” Ball Steeple Spire Fleur Spear
3” Ball Steeple Spire Fleur Spear
Note: 1. See Reference Section for available paint colors. 2. See Reference Section for band clamp kit pole diameters.
4/15/19
Page T15-33www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
S
Banner Mounting Bracket, AlumFor Square Poles, Articulating Arm
SH-3532 - - - -Banner Width
18=18”24=24”30=30”36=36”
Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
Pole Size
4=4” Square5=2-7/8” Square6.63=6-5/8” Square
3” Ball Steeple Spire Fleur Spear
Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole when not in use.
Banner Brackets
Banner Mounting Bracket, AlumUniversal Hub Mount
SH-3523 - - -Finial/Color
BL_ _=2” BallST_ _=SteepleSI_ _=SpireFL_ _=FleurSE_ _=1-1/2” Spear
Coating
P_ _=Paint
Banner Width
18=18”24=24”30=30”36=36”
3” Ball Steeple Spire Fleur Spear
Note: 1. See Reference Section for available paint colors.
4/15/19
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3523-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,SH-3532-4-24-BL28-P33, for Gold Ball finial and Gloss Black assembly.
Page T15-34 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SFlag Mount, Hinged Articulating Serrated, Alum
Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole when not in use.
Flag Mounts
Flag Mount w/ Articulating Serated, AlumUniversal Hub
SH-3538 -Coating
P_ _=Paint
SH-3549 - -Coating
P_ _=Paint
Pole Dia
2.88=2-7/8”3.50=3-1/2”4.06=3” Fluted4.50=4-1/2”5.08=4” Fluted5.56=5-9/16”
Flag Mount, Articulating Serrrated, AlumBand Mini-Brac
SH-3539 - -BandLength/Painted
29=29” 42=42”29PB=29” Painted42PB=42” Painted
Coating
P_ _=Paint
Flag Mount, 2-Way Articulating Serrated, Alum
SH-3561 - -Coating
P_ _=Paint
Pole Dia
2.88=2-7/8”3.50=3-1/2”4.06=3” Fluted4.50=4-1/2”5.08=4” Fluted5.56=5-9/16”
Note: 1. See Reference Section for available paint colors. 2. See Reference Section page for band clamp kit pole diameters.
4/15/19
Note:If painted band is required, band will be painted same color as assembly.
Page T15-35www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
LIG
HTI
NG
& P
OLE
SPelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole when not in use.
Pole Accessories
Break-a-way Coupler, 1”-8NC, AlumFor Banner Bracs
AP-7239 -Coating
P_ _=Paint
3” Ball Steeple Spire Fleur Spear
Note: 1. See Reference Section for available paint colors.
4/15/19
Flag Rod Assy, Alum
AP-7380 - - -Rod Length
42=42”52=52”
Finial/Color
BL_ _=2” BallSE_ _=1-1/2” SpearSI_ _=SpireST_ _=SteepleFL_ _=Fleur
Coating
P_ _=Paint
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,AP-7380-42-ST28-P33, for Gold Ball Steeple finial and Gloss Black assembly.
Mounting Kit, 1” Tube Collar, AlumFor Rigid Signs
AP-5105 -Coating
P_ _=Paint
Mounting Kit, 1” Tube Collar, AlumFor Free-Swinging Signs
AP-5132 -Coating
P_ _=Paint
Mounting Kit, 1” Tube Collar, AlumFor Plant Hanger
AP-5110 -Coating
P_ _=Paint
3” Ball Steeple Spire Fleur Spear
Plant Hanger Rod Assy, Alum
AP-7386 - - -Rod Length
18=18”24=24”30=30”
Finial/Color
BL_ _=2” BallSE_ _=1-1/2” SpearSI_ _=SpireST_ _=SteepleFL_ _=Fleur
Coating
P_ _=Paint
Note:Finial may be ordered as P28 Gold or same color as assembly, i.e.,AP-7386-18-BL28-P33, for Gold Ball Ball finial and Gloss Black assembly.