BrickGun LEGO® Storage Labels - Bricks 2xN2357 2357 2357 2357 2357 2357 2357 2357 2357 Brick Corner...
6
11458 Plate Modified 1x2 w/Pin Hole On Top Part Type (Plate, Brick, etc.) Part Dimensions (in studs) Additional Part Attributes LEGO® Part Number Technic® Indicator Part Image Part Color Rainbow gradient denotes all colors are in drawer: Otherwise, specific color(s) are shown: Lighter, bordered shades indicate translucent pieces: Part Length Indicator Certain parts will have a large part length indicator on the label as well. This is to help quickly identify the correct drawer when parts of a similar type are situated adjacently. We group all of our similar parts with length increasing from left to right, so being able to see a large “2” or “4” in the “Plate 2x” area, for example, makes part selection that much faster and easier. Part Sub-Type (Round, Modified, etc.) LEGEND www.brickgun.com brickgun ©1999, 2016 ONYX (Jeff Boen) [email protected] The following is the labeling system used in the BrickGun studio by our model designers. Whether you’re working with part collections that number in the tens or in the hundreds of thousands, having them organized in an easy-to-locate fashion is paramount. You want to spend time building, not scrounging to find the correct part in the correct color. We employ a series of clear drawer organizers, similar to those made by ™, ™ and others. Stack-On Akro-Mills Our “standard” drawers are 2.75” wide, “narrow” drawers (for smaller parts, mostly Technic™) are 2” wide and other larger drawers are various heights and widths (for large parts and bulk storage). The racks are organized by part type (Plates, Bricks, Slopes, etc.) with similar parts increasing in dimension from left to right. Parts of the same type are separated by color vertically. The labels provide all necessary information at a glance, showing what type and sub-type the part is, its image, dimensions and what colors of the part are in the particular drawer. The LEGO® part number is also included, which is helpful when ordering more or working in to document a design. MLCAD We print our labels on standard Inkjet or Laser Printers, using . They are cut along Avery full-sheet labels (8165) the gray guidelines using a and (with a #11 blade). A can also be metal straight-edge X-acto™ knife paper cutter used if you have one at your disposal. v2.0 Bricks 2 x N (Including Round and Modified) ® LEGO Storage Labels brickgun
Transcript of BrickGun LEGO® Storage Labels - Bricks 2xN2357 2357 2357 2357 2357 2357 2357 2357 2357 Brick Corner...
11458
PlateModified
1x2w/Pin Hole
On Top
Part Type(Plate, Brick, etc.)
Part Dimensions (in studs)
Additional Part Attributes
LEGO® Part Number
Technic® Indicator
Part Image
Part ColorRainbow gradient denotes all colors are in drawer:
Otherwise, specific color(s) are shown:
Lighter, bordered shades indicate translucent pieces:
Part Length Indicator Certain parts will have a large part length indicator on the label as well.This is to help quickly identify the correct drawer when parts of a similar
type are situated adjacently.We group all of our similar parts with length increasing from left to right,
so being able to see a large “2” or “4” in the “Plate 2x” area, for example,makes part selection that much faster and easier.
Part Sub-Type(Round, Modified, etc.)
LEGEND
www.brickgun.combrickgun©1999, 2016 ONYX (Jeff Boen) [email protected]
The following is the labeling system used in the BrickGun studio by our model designers.
Whether you’re working with part collections that number in the tens or in the hundreds of thousands, having them organized in an easy-to-locate fashion is paramount. You want to spend time building, not scrounging to find the correct part in the correct color.
We employ a series of clear drawer organizers, similar to those made by ™, ™ and others.Stack-On Akro-MillsOur “standard” drawers are 2.75” wide, “narrow” drawers (for smaller parts, mostly Technic™) are 2” wide and other larger drawers are various heights and widths (for large parts and bulk storage).
The racks are organized by part type (Plates, Bricks, Slopes, etc.) with similar parts increasing in dimension from left to right. Parts of the same type are separated by color vertically.
The labels provide all necessary information at a glance, showing what type and sub-type the part is, its image, dimensions and what colors of the part are in the particular drawer. The LEGO® part number is also included, which is helpful when ordering more or working in to document a design.MLCAD
We print our labels on standard Inkjet or Laser Printers, using . They are cut along Avery full-sheet labels (8165)the gray guidelines using a and (with a #11 blade). A can also be metal straight-edge X-acto™ knife paper cutterused if you have one at your disposal.
v2.0Bricks 2 x N(Including Round and Modified)
®LEGO Storage Labelsbrickgun
labels
.bric
kgun.c
om
Lego® Storage Labels - ©1999, 2016 ONYX (Jeff Boen) [email protected] brickgunwww.brickgun.com
3001
3001
3001
3001
3001
3001
3001
3001
3001
3001
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
2x4
2x4
2x4
2x4
2x4
2x4
2x4
2x4
2x4
2x4
3002
3002
3002
3002
3002
3002
3002
3002
3002
3002
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
2x3
2x3
2x3
2x3
2x3
2x3
2x3
2x3
2x3
2x3
3003
3003
3003
3003
3003
3003
3003
3003
3003
3003
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
labels
.bric
kgun.c
om
Lego® Storage Labels - ©1999, 2016 ONYX (Jeff Boen) [email protected] brickgunwww.brickgun.com
3006
3006
3006
3006
3006
3006
3006
3006
3006
3006
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
2x10
2x10
2x10
2x10
2x10
2x10
2x10
2x10
2x10
2x10
3007
3007
3007
3007
3007
3007
3007
3007
3007
3007
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2x8
2456
2456
2456
2456
2456
2456
2456
2456
2456
2456
2x6
2x6
2x6
2x6
2x6
2x6
2x6
2x6
2x6
2x6
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
Brick
labels
.bric
kgun.c
om
Lego® Storage Labels - ©1999, 2016 ONYX (Jeff Boen) [email protected] brickgunwww.brickgun.com
2357
2357
2357
2357
2357
2357
2357
2357
2357
2357
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
92947
92947
92947
92947
92947
92947
92947
92947
92947
92947
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
2x2w/Grille
3941
3941
3941
3941
3941
3941
3941
3941
3941
3941
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
2x2
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
BrickRound
labels
.bric
kgun.c
om
Lego® Storage Labels - ©1999, 2016 ONYX (Jeff Boen) [email protected] brickgunwww.brickgun.com
90258
47117
57909
57908
62712
30592
3137
2x2w/Grooves
2x2w/Grooves
and Peg
2x2w/Ball Joint
On Side
2x2w/Ball Joints
On Sides
2x2w/Ball Socket
On Side
2x2w/Vert Pin
1x2 Side Plates
2x2w/Wheels
Holder
4729
6232
30000
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
2x2w/Pin
On Top
2x2w/Pin
On Side
2x2w/Pins
On Sides
3063
3063
3063
3063
3063
3063
3063
3063
3063
3063
87620
87620
87620
87620
87620
87620
87620
87620
87620
87620
2x2Round
2x2Round
2x2Round
2x2Round
2x2Round
2x2Round
2x2Round
2x2Round
2x2Round
2x2Round
2x2Facet
2x2Facet
2x2Facet
2x2Facet
2x2Facet
2x2Facet
2x2Facet
2x2Facet
2x2Facet
2x2Facet
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
BrickCorner
labels
.bric
kgun.c
om
Lego® Storage Labels - ©1999, 2016 ONYX (Jeff Boen) [email protected] brickgunwww.brickgun.com
6081
6192
1042
6249
3709
4747
4748
7049
800
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
6091
6091
6091
6091
6091
6091
6091
6091
6091
6091
30165
6215
2x1x1&1/3w/Curved Top
2x4x1&1/3w/Curved Top
2x4w/Curved Top
2x4Half Round
w/Cutout
2x4w/Pins
On Ends
2x4w/Holes
On SidesOn Ends
2x4w/Coupling
Male
2x4w/Coupling
Female
2x4w/Wheels
Holder
2x4w/Wheels
Holderfor Steering
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x1x1&1/3w/Curved Top
2x2w/Curved Top
2 Studs on Top
2x3w/Curved Top
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
BrickModified
