CONTRACTORS’ EQUIPMENT • POWER TOOLS • CONSTRUCTION SUPPLIES

PRICES VALID: UNTIL DEC 31, 2017Volume 5, Issue 1

BUILD YOUR OWN EXTRACTION STATION

SILICA DUST CONTROLRESPIRATORS,EXTRACTORS,ATTACHMENTS & DUSTLESS SAWS EVERYTHING YOU NEED TO COMPLY

BREATHE EASY WITH FARRELL EQUIPMENT!

WHAT IS THIS WORTH TO YOU?

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrolEQUIPMENT & SUPPLY CO., INC.

BREATHE EASY WITH FARRELL EQUIPMENT!

Silica Regulations - For ConstructionCompliance Date: September 23, 2017

ARE YOU COMPLIANT? Exposure to silica dust can be a major cause of a fatal lung cancer. Silica Dust is found in materials like concrete, tile, rock, stone and brick. The process of cutting, grinding, or drilling creates airborne Silica Dust.

To better control this deadly dust, OSHA has updated its silica exposure limit:After Regulation: Permissible Exposure Limit (PEL) 50 μg/m³ over 8-hour period

WHAT YOU NEED TO DO

Reduce the Permissible limit to 50 μg/m³ over 8-hour period. Requires Employers to:

- Follow the CONTROL METHODS below to limit exposure below the PEL. - Provide Respirators according to TABLE 1 on Page 3. - Limit worker access to high exposure areas. - Develop a written exposure control plan. - Train workers on Silica risks and how to avoid exposure. - Provide medical exams for highly exposed workers; provide information about their lung health.

Establish and implement a written exposure control plan to identify tasks that involve exposure and methods used to protect workers, including procedures for restricted access areas. Also, employers need to designate a competent person to implement the written exposure plan.

RESPIRATORS DUSTLESS SAWSATTACHMENTSEXTRACTORS

Cutting - (Handheld, Walk-behind)

Drilling

Grinding

Use saw equipped with integrated water delivery system that continuously feeds water to the blade.

Use shroud around drill bit with a dust collection system. Dust collector must have a filter with 99% or greater

efficiency and a filter cleaning mechanism. Use a HEPA-filtered vacuum when cleaning holes.

Use grinder equipped with commercially available shroud and dust collection system.

Dust collector must provide 25 cubic feet perminute (cfm) or greater airflow per inch of wheel diameter and have a filter with 99% or greater efficiency and a cyclonic pre-separator or filter cleaning mechanism.

Control Methods

For informational purposes only. Please consult an OSHA representative to ensure compliance.

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrol

SERVING THE CONSTRUCTION INDUSTRYSINCE 1968 EQUIPMENT & SUPPLY CO., INC.

33

Cutting (Indoor)REGULATION

Drilling

Grinding - Mortar

Grinding - Other (Indoor)

Grinding - Other (Outdoor)

Cutting (Outdoor)

APF 10

APF 10

APF 10

None

None

None

≤4 Hours/Shift

APF 10

APF 10

APF 25

APF 10

None

APF 10

≥4 Hours/Shift

10 25, 1000 50 ABSRASIVE BLASTING

COMFORT MODEL

REUSABLE FACE MASKSEconomical, lowmaintenance, simple to handle and extremely lightweight.

N95 RESPIRATORY PROTECTION At least 95 percent filtration efficiency against certain non-oil based particles.

ABRASIVE BLASTING HELMET ASSEMBLYThe double faceshield design helps protect the face and eyes from airborne particles. Designed for use up to 1000 x PEL

KIT FOR THE ABRASIVE HELMET

Breathing TubeGVP-122

Air Regulating ValveV-300 (#07019)

25' Air Respiratory HoseW9435 (#72793)

LARGE, EXTRA ROOMExtra room for larger breathing area and extended facial lens

FULL REUSABLE RESPIRATORSLarge lens provides a wide field of view for excellent visibility.

VERSAFLO™ HEAVY INDUSTRY PAPR KIT TR-600-HIKComplete Powered Air Purifying Respira-tor. A complete PAPR system for use in rugged environments such as industrial, demolition, grinding, metal finishing and casting operations.Work with clean, filtered air today!TR-632 High Capacity Battery Life: 11-19 hours.

(PINK) Nuisance Level Organic Vapor Relief

PARTICULATE FILTERSFOR RESPIRATOR MASKS99.97% FILTER EFFICIENCY

3M01-54356

3M01-07184

VERSAFLO™ HEAVY INDUSTRY PAPR KIT TR-300-HIKWork 10-12 hrs on a single charge! Lightest and smallest model avail-able. Easy to use and very low maintenance. Cleans and filters air.

APF

RESPIRATION

1 Choose the Respiratorfor your Application(Refer to OSHA Table 1)

TABLE 1

+20

+10

4/Case

2/Case

2/Case

4/Case

SPECIALPRICING

SPECIALPRICING

33

$1.25 3M01-46457$0.90

$2.05

$12.99 3M01-07026

$2.35 3M01-54343

$11.99 3M01-07025

$649.99 W-8100B (#21294)

$469.99 (#54159) Large

$469.99 (#54146) Medium

$1,549.99 TR-600 (#37374)

$3.99

$54.99

$179.99

$149.99$9.99

$1,349.99 TR-300 (#17378)

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrolEQUIPMENT & SUPPLY CO., INC.

BUILD YOUR OWN EXTRACTION STATION Choose a HEPA Dust Extractor

DRILLING SDS PLUS ≤ 3/4"

DRILLING SDS PLUS

BREATHE EASY WITH FARRELL EQUIPMENT!

POWER TOOL

8 GALLON WET/DRY HEPA DUST EXTRACTOR

EXTRACTOR

10 GALLON WET/DRY HEPA DUST EXTRACTOR

9 GALLON WET/DRY HEPA DUST EXTRACTOR

HEPA wet/dry filter traps 99.97% of dust at 0.3 microns

Powerful 15 Amp motor, 140 CFM. Automatic Filter Clean. Convenient Telescoping Handle.

DRILLING SPLINE

Dewalt Rotary Hammers

Fits All SDS PLUS ≤ 1-1/8"D25052, D25133 D25260, D25213, D25223, D25262, D25263, D25313, D25323, D25324, D25333, DC212, DCH133, DCH213, DCH253

D25301D

Large Hammer Drilling Dust Extraction

Dewalt Rotary HammersFits All SDS PLUS Rotary Hammers ≥ 1-1/8"D25416, D25413

DRILLING SDS MAX

Dewalt Rotary HammersFits All SDS MAX Rotary HammersDCH481B, D25481, D25501, D25601, D25603, D25721, D25723, D25761, D25763

Dewalt Rotary Hammers

D25553, D25651

CHIPPING & DEMOLITION SPLINE, SDS MAX, HEX 3/4"

Dewalt Rotary & Demolition HammersD25810, D25831, D25851, D25891, D25899, D25901, D25941

CHIPPING & DEMOLITION HEX 1-1/8"

SURFACE GRINDING SHROUDS

DWE46152 - 5"

DWE46170 - 7"

DWH052K

5" Surface Grinding Dust Shroud - DWE46152

DWE402(N), DWE4214, DWE4222, DWE43114(N), 43144(N), DWE43131, DWE43140, DWE43115(N), DWE43113, DWE43116, DWE43066(N)

Tuckpointing Dust Shroud Available - DWE46100

Dewalt Demolition Hammersand Pointed and Flat Chiselsup to 1-1/2" wide

D25980, D25960

Bosch Rotary Hammers

11253VSR, 11255VSR, RH228VC,RH328VC, 11536VSR, 11536C, RHH181-01

2 3 Find the attachment you need for your tool

DWH053K

DWH050K

HDC100

POWER TOOLEXTRACTOR

Can't Find your Attachment? We have more options. Please give us a call or contact your salesman.

$349.99 DEWDWV010

$499.99 DEWDWV012

$99.99

$159.99

$109.99

$59.99

$119.99

$71.99$599.99 BOS01-VAC090A

$89.99

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrol

SERVING THE CONSTRUCTION INDUSTRYSINCE 1968 EQUIPMENT & SUPPLY CO., INC.

55

BUILD YOUR OWN EXTRACTION STATION Choose a HEPA Dust Extractor

POWER TOOL

12 GALLON WET/DRY DUST EXTRACTOR

2.1 GAL. DRY VACUUM (TOOL ONLY)

EXTRACTORDRILLING SDS PLUS

DEMOLITION SDS MAX

SURFACING GRINDING SHROUDS

Makita Hammers

HR2611F, XRH01,HR2631F

Makita Hammers

BHR202, BHR24,HR1830F, HR2470F, HR2475, HR2811F, HRH01H, RH01ZX2

Makita Hammers

HM0870C, HM1111C, HM1203C, HM1214C, HR4002, HR5212C

Makita Hammers

HM1307CB, HM1500B, HM1317CB,HM1810, HM1812

Makita Grinders

All Grinders, Except9005B, 9564P

193472-7

3/4" x 10' Hose192108-A

Direct ConnectNo Connector

Necessary

Direct ConnectNo Connector

Necessary

POWER TOOLEXTRACTORHDC250

Bosch Hammer DrillsHDC-200 - For 1/4" - 1-3/8"Max hole diameter - 2-5/8"

HDC-250 - For 2-1/4" - 5"Max hole diameter - 6"

SDS MAX, Spline Hammers,& Demolition Hammers11264EVS, 11265EVS, 11245EVS, RH540M, RH850VC, RH540S, RH745, RH1255VC, 11321EVS, DH507, DH712VX

4-1/2" Grinders1821, 1821D, AG40-Series, AG50Series, GWS10-45, GWS10-45P(D),GWS13-50VS, GWS13-50VSP, GWS18V-45CP, GWS18V45C

7", 9" Shrouds Available

Demo/Breaker Hammers

11335K, BH2760VC, BH2770VC, DH1020VC

DRILLING SDS MAX / PLUS

CHIPPING & DEMOLITION SDS MAX / SPLINE

CONCRETE SURFACING

14-GALLON WET/DRYDUST EXTRACTOR

WITH AUTOMATIC FILTER CLEAN

Includes:10 ft. Vacuum Hose, Bend Nozzle,Hose-Nozzle Interface, Power Tool Adapter Nozzle, Cellulose Flat Filter

HDC200

18SG-5E

HDC300

195173-3

196074-8

196571-4

197172-1

195236-5 (4-1/2"-5")

DEMOLITION BRUTE JACKHAMMER HDC300

Makita Hammers (works for demo)

HR4001C, HR4002C, HR4010C,HR4510C, HR4013C, HR5212C

55

$99.99

$109.99

$569.99 MAKVC4710

$549.99 XCV04Z

$9.99

$24.99 $49.99

$64.99

$94.99

$94.99

$99.99

$55.99

$124.99

$49.99 $49.99

$49.99

$649.99 BOS01-VAC140A

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrolEQUIPMENT & SUPPLY CO., INC.

6

1/2 GAL. HEPA FILTER BACKPACK VACUUM

CORDLESS WET/DRY HEPA VACUUM (TOOL ONLY)

16 GAL HEPA WET DRY DUSTLESS VAC

CUTTING

BUILT IN VACUUM DRILLING SDS PLUS

DRILLING SDS PLUS

CUTTING

GRINDING

TUCKPOINTING

NANO FILTER ATTACHMENT, 5 PACK

SURFACE GRINDING SHROUDS

Makita 4-1/2" - 5 Grinders

All Grinders, Except9005B

M18 FUEL™ 1" SDS Plus Rotary Hammer (2712-22) . . . . . . .

M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer (2715-22) . . .

Dust Extraction AttachmentFits all SDS Plus Rotary Hammers

Drywall Cutout Tool

XOC-1, 3706

Makita 4-1/2" - 5 Grinders

All Grinders, Except 9005B

DTSD1846

192618-2

3/4" x 10' Hose192108-A

Direct ConnectNo Connector

Necessary

POWER TOOL

POWER TOOL

ATTACHMENT

EXTRACTOR

EXTRACTOR

EXTRACTOR

5" Cut Buddie Dust Shroud

CAPTURES UP TO 99% OF AIRBORNE DUST.

FITS MOST BRANDS OF POWER TOOLS.

Universal Dust Collection Shrouds

12Ft. HOSE

193794-5

193449-2

196846-1

P-78293

5261-DE

2712-DE

2715-DE

5" Angle Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7" Angle Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49-40-6100

49-40-6105

Attach to any dust port enabled Makita tool for mobile extraction

Runs for 90 minutes on low 53CFM suction power and effi-

cient HEPA filter.

BREATHE EASY WITH FARRELL EQUIPMENT!

2.8 Amp motor for strong suction Powerful 18V motor - 45 CFM Includes 6 ft. extendable hose, crevice tool, and utility nozzle

Also functions as a blower

For use with the Makita 12 Gallon Wet/Dry Vacuum model VC4710

Easy to attach, extends filter life by two.

Can't find your Attachment? We have more options. Please give us a call or contact your salesperson.

$289.99 XCV05Z $64.99$24.99

5" Dust Buddie Shroud

DTSD1835 4”- 5” WITH 18” HOSE - $99.99DTSD1850 7”- 9” WITH 18” HOSE - $99.99

$124.95

$99.99

$12.99

$99.99

$29.99

$139.99$139.99

$89.99

$69.99

$59.99

$94.99 0880-20

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrol

SERVING THE CONSTRUCTION INDUSTRYSINCE 1968 EQUIPMENT & SUPPLY CO., INC.

77

IQ360X TABLE SAWBrick, Pavers, Stone, Veneer

CUT DRY WITH NO DUSTCUT DRY WITH NO DUST

COLLECTS UP TO 99.5% OF THE DUST

9 GALLON WET / DRY VACUUM DUST EXTRACTOR

Easy to change, auto cleaning system. Perfect for Silica Dust Cleanup.

10" DRY CUT TILE SAWCeramics, Porcelain, Marble

12" POWER CUTTERConcrete, Pavers, Brick, Stone

Includes the#Q3-RT Rolling Table

HEPA Filter Not Included

77

$2,075.00 IQP-IQ360

$499.99 KAR/NT 35/1 TACT NE

$1,950.00 IQP-IQPC-912

$1,590.00 IQP-IQTS244

EQUIPMENT & SUPPLY CO., INC.

DUST BARRIEREnables you to screen off your work area with plas-tic sheeting, light canvas, or drop cloth.

12 FT. SPRING POLE

7’ ZIPPER (2/PACK)

CONTRACTORS’ EQUIPMENT • POWER TOOLS • CONSTRUCTION SUPPLIES

EAU CLAIRE715-835-4334 800-533-0909Fax: 715-835-43561510 N. Hastings WayEau Claire, WI 54703

APPLETON920-903-1985Fax: 920-903-82781002 Truman StreetKimberly, WI 54136

LA CROSSE608-796-9300888-533-0909Fax: 608-796-9435508 Monitor StreetLa Crosse, WI 54603

MADISON608-222-5372888-533-7909Fax: 608-222-54056809 Mangrove LaneMonona, WI 53713

ROCHESTER507-252-0234888-533-8909Fax: 507-252-02221635 3rd Avenue S.E.Rochester, MN 55904

WAUSAU715-355-8300800-933-5939Fax: 715-298-16627405 Commerce DriveWeston, WI 54476

Mon-Friday: 7:00 am - 5:00 pm , Saturdays (EC/LAX Stores Only): 8:00 am - Noon

FOR A LISTING OF PRODUCTS & INFOFarrellequipment.com/dustcontrol

PRICES VALID : UNTIL DEC. 31, 2017

NEW DUST CONTROL SYSTEM BY HUSQVARNA

T-LINE | 3-PHASE HEPA DUST EXTRACTORS FOR HEAVY DUTY JOBSFor large scale projects that demand substantial dust extraction.

S-LINE | SINGLE PHASE HEPA DUST EXTRACTORS A-LINE | AIR SRUBBERS

T18000

S36 230V

24.1

4.8

710

354

PG 820 RC, PG 820, PG 680 RC, PG 680,PG 530

PG 530, PG 450, PG 400 and PG 280

Power, HP

Power, HP

Airflow, CFM

Airflow, CFM

Recommended for

Recommended for

T10000

S26 120V

16.9

3.2

480

236

PG 820 RC, PG 820, PG 680 RC, PG 680,PG 530

PG280, Core Drilling, Power Cutters, Hand-held Power Tools

T8600

S13 120V

11.5

1.6

353

118

PG 820 RC, PG 820, PG 680 RC, PG 680,PG 530

Core Drilling, Power Cutters, Handheld Power Tools

T8600P

A1200

18

.8

410

600/1200

PG 820 RC, PG 820, PG 680 RC, PG 680,PG 530

T7500

A600

10.1

.5

353

300/600

PG 820 RC, PG 820, PG 680 RC, PG 680,PG 530

Prices subject to change without notice. While supplies last. Some items need additional lead time.

Farre

ll Eq

uipm

ent &

Sup

ply C

o., I

nc.

1510

N. H

astin

gs W

ayEa

u Cl

aire

, WI 5

4703

PRSR

T ST

DU.

S. P

OSTA

GEPA

IDEa

u Cl

aire

, WI

Perm

it No

. 155

7

$10,949.99

$2,039.99

$8,949.99

$1,099.99

$10,489.99

$1,049.99

$10,469.99

$649.99

$12,999.99

$4,169.99

$12.99 WALAZ2

$59.99 WALSLP6