brands you trust. Solutions for Power Generation
32
brands you trust. ® www.craneenergy.com Solutions for Power Generation
-
Upload
truongdieu -
Category
Documents
-
view
218 -
download
1
Transcript of brands you trust. Solutions for Power Generation
brands you trust.
®
www.craneenergy.com
Solutions for Power Generation
www.craneenergy.com
3
Table of Contents
Welcome to CRANE Energy Flow Solutions.............................................................4
Why Buy from CRANE Energy..................................................................................5
Corporate Overview of CRANE Co..........................................................................6
CRANE Energy Flow Solutions’ Overview................................................................7
Power Generation.....................................................................................................8
CRANE Nuclear Overview........................................................................................9
Combined Cycle Power Plant.............................................................................10-11
Coal-fired Power Plant.......................................................................................12-13
Parabolic Trough Technology...................................................................................14
Compact Linear Fresnel Reflector Technology........................................................15
Flue Gas Desulphurization.....................................................................................16
High Integrity Slurry Service Butterfly Valves.........................................................17
Isolation Valves..................................................................................................18-19
Flow Reversal Protection Valves.......................................................................20-21
Special Application Valves................................................................................22-24
Strainers & Specialty Products...............................................................................25
Valve Replacement Parts.......................................................................................26
Quality & Certifications...........................................................................................27
CRANE Energy’s Worldwide Facilities...............................................................28-29
Performance Culture Based on Trust and Respect
To R.T. Crane, this meant being both hard headed and open minded. It’s not as easy as it sounds. We question our
assumptions; we listen carefully to coworkers’ ideas, then add our own thoughts to see if we can build that idea into a more valuable contribution; and we trust that our suggestions will receive the same respectful treatment. At CRANE, new ideas are welcome, along
with equal doses of trust and respect.
www.craneenergy.com
4
Thank you for your interest in our products. We are pleased to be able to present you with this overview of the outstanding portfolio of products and services we offer. Inside these pages you will find valves that solve your problems, provoke ideas, or raise your awareness of the broad range of valves we have available to meet a myriad of applications and service conditions.
When you look inside our products you will find more than just iron or steel. There you will find the latest technology in design, metallurgy, casting and machining all founded on our Operational Excellence principles that drive out waste and increase repeatability. In the long run, we strive for competitive products that meet or exceed your specifications, and are delivered to you on-time. Every product also contains a promise that has been built in since the very first valve CRANE made over 150 years ago. The promise allows customers to be assured of quality, engineering excellence and a legacy of performance that has been a formula of success throughout our history.
CRANE today is not only a single brand, but rather a collection of some of the best known brands in flow control history—Flowseal, Krombach, Duo-Chek, Pacific, Stockham, Center Line, Noz-Chek and Aloyco to name a few. Each of these brands have their own highly engineered product legacy and are brought together to serve the global energy infrastructure markets including Power Generation, Oil & Gas, and Petroleum Refining among others. There truly is no other portfolio like it today.
The 2,000 people who make up CRANE Energy Flow Solutions are also a big component of the products and services presented here. The people who design, manufacture, purchase, build, ship, quote, sell and support the products are dedicated to providing you with the best products at the lowest total cost of ownership. We work hard, because we know your processes demand it. From the simplest service to the most critical process in your facility, CRANE Energy Flow Solutions stands ready to deliver brands you know, technology you want and solutions you need.
Strength Through Integrity
This is not a new idea for CRANE. We have been committed to the highest
standards of business conduct since our founding in 1855.
Our founder, R.T. Crane, wrote and spoke extensively about the importance of business ethics and values, about the
confidence and goodwill among employees and customers, and how this can be a competitive advantage. Today, his words
continue to drive our business philosophy and serve as
a benchmark by which we measure our success.
Welcome to CRANE Energy Flow Solutions
www.craneenergy.com
5
Our Operational Excellence JourneyWhat is Operational Excellence? At CRANE, we call this OpEx. It is our driving philosophy. What does it mean? CRANE Energy designs products to meet customer specifications, manufactures them in our own factories, distributes standard product from strategically located inventories and services valves at customer locations. Globally, our focus is to flow value to our customers, through world-class operation.
Change for the better—that’s the literal meaning of the Japanese word kaizen, formed from the word kai (change) and zen (to become good). CRANE, with its culture of continuous improvement, stages almost 1000 kaizen events throughout the company annually, each aimed at solving a particular problem or improving the way in which we perform some aspect of our business. Employees from all levels of our business separate themselves from their jobs to come together for an entire week to participate in an intensive kaizen where they focus on a problem and implement a solution.
Kaizens are just one part of the CRANE Business System, a comprehensive set of business processes and Operational Excellence tools that we use to drive continuous improvement throughout our businesses. Beginning with a core value of integrity, the CRANE Business System incorporates the voice of the customer, value stream analysis (linking customers and suppliers with our production cells), prescriptive and uniform visual management techniques, and a broad range of Operational Excellence tools into a disciplined strategy deployment process to drive superior financial results by focusing on continuously improving safety, quality, delivery and cost.
Flow ExpertiseCRANE Technical Paper No. 410 (TP-410) is the quintessential guide to understanding the flow of fluid through valves, pipes and fittings, enabling you to select the correct equipment for your piping system.
Originally developed in 1942, the latest edition of CRANE TP-410 serves as an indispensable technical resource for specifying engineers, designers and engineering students. TP-410 is published by the CRANE Valve Group, one of the world’s leading suppliers of valve products and services.
For more information about CRANE Technical Paper No. 410 (TP-410) or to purchase a copy please visit: www.tp410.com.
Faster, Better and Easier
The world is moving ever more quickly. Customers have new demands and competition is
keen. Success depends on our ability to become faster, better and easier to do business with tomorrow, next month, and next year, which means moving our comfort zone from the old way
to the best way.
Continuous Improvement
Improving some of the time, in one or two areas, just won’t
cut it. Our success is built on an accelerated stream of
incremental and breakthrough improvements in products,
manufacturing, finance, distribution — the works. We look for new ways to create value, and then translate
those ideas into advantages our customers understand, appreciate, and act upon.
Why Buy from CRANE Energy
www.craneenergy.com
6
CRANE Co. is a diversified manufacturer of highly engineered industrial products with a substantial presence in a number of focused niche markets. With approximately 10,000 employees working together in five business segments across 25 countries, CRANE generated 2009 net sales of $2.2 billion.
Over 150 Years of Making HistoryCRANE’s founder, R.T. Crane, was ahead of his time. Founding the business in 1855 he wrote and spoke extensively about the importance of business ethics and values, the confidence and goodwill among employees and customers, and the competitive advantage that can be obtained by taking the high road. Today, his words continue to drive CRANE’s business philosophy and serves as a benchmark by which performance is measured.
CRANE InnovationCRANE innovation can be found behind the scenes virtually everywhere, helping everyday life run efficiently. CRANE has five strong business segments, each strategically positioned to produce excellent returns and high cash flow over the business cycle. By growing these segments and transitioning to a more integrated operating company with a common business system and a common intellectual capital process, CRANE continues to create value for its shareholders and important returns for other stakeholders in the Company—employees, customers and suppliers.
CRANE’s Business SegmentsFluid Handling: 48% Aerospace & Electronics: 27%Merchandising Systems: 13% Engineered Materials: 8%Controls: 4%
For more information on CRANE Co., please visit our website at: www.craneco.com.
“I am resolved to conduct my business in the strictest honesty
and fairness; to avoid all deception and trickery; to deal fairly with both
customers and competitors; to be liberal and just toward employees
and to put my whole mind upon the business.”
R .T. Crane, July 4, 1855
CRANE Co Significant Events 1855 - Present.
1855Founding of R.T. Crane Brass & Bell Foundry in Chicago. CRANE produces valves, fittings, and
specialty castings for a growing industrial America.
1860sAs Northwest Manufacturing Co., CRANE supplies
essential steam components to the railroads and enters the steam heating business. CRANE
Elevator Company begins making hoists, elevators and steam engines, becoming one of the major
names in the field for 30 years.
1870sCRANE pioneers improvements in manufacturing,
including the use of multiple purpose machines invented by R.T. Crane and a conveyor system of
moving molds and pouring metal - the beginning of line production in foundries.
1880sCRANE’s business is booming. The company
operates four manufacturing facilities and employs over 1500 people. Branch houses extend the
company’s business to the Western U.S.
1885CRANE Co. is adopted as the Company name.
1890sR.T. Crane establishes a metallurgical laboratory,
probably the first in the Midwest.
CRANE products have the strength and quality to meet the challenges of ever higher fluid pressures
and temperatures.
1900CRANE produces steel valves and fittings in its
own steel foundries.
CRANE’s rigorous approaches to metallurgical science and material testing become the model for
the valve and fitting industry.
1912Founder R.T. Crane dies. CRANE Co. is the
leader in the valve and fitting business. R.T. Crane, Jr. assumes the Company’s presidency.
The company builds the first truly modern factory, switching wholly to electricity for power. In
Chicago, “The Great Works” built on 160 acres is the most modern factory of its time.
1920sCRANE Co. conceives the idea of the modern bathroom, creating the first practical decorative bathroom ensembles. The American bathroom becomes a sign of affluence and social pride. CRANE plumbing fixtures, many designed by noted industrial designer Henry Dreyfuss, are
celebrated for their styling, color and innovation.
1930Company-owned branch distribution operations
grow to 190 from only 86 in 1920. The highlight is the lavish $1 million showroom on the Atlantic City
Boardwalk.
1936CR listed on the New York Stock Exchange.
1937The Golden Gate Bridge opens with its railing
material supplied by CRANE Co.
Corporate Overview
www.craneenergy.com
7
CRANE ChemPharma Flow Solutions
CRANE EnergyFlow Solutions
CRANE Building Services & Utilities
CRANE Pumps & Systems
CRANE Valve Group CRANE Supply
Fluid Handling
CRANE Energy Flow Solutions is headquartered in The Woodlands, Texas, and is part of CRANE Co.’s Fluid Handling Business Segment. With 14 manufacturing facilities worldwide, CRANE Energy has a staff of approximately 2,000 employees.
CRANE Energy Flow Solutions’ HistoryAlthough diverse, CRANE Energy’s products all meet high standards for product quality. However, one element remains at the center of everything we do: Integrity. This began with the founder who, in 1855, resolved “to conduct my business in the strictest honesty and fairness.” At 23 years old, Richard Teller Crane started business in a one-room foundry with the premise not to make his products better than anyone else, but to “be fair to both customers and competitors.” So, while his name is on the outside of our products and our buildings, his ideals are at the heart of everything our company has accomplished.
Today’s challenges could not have been imagined in that foundry so long ago. But through the years, CRANE’s revolutionary leadership, innovation, customer focus, and relentless pursuit of excellence have built our legacy and they are the roadmap for our future.
Our Markets
Focused on the oil, gas, refining and power markets, the Energy product portfolio brings well-known brands together to provide specifying engineers, process designers and end users with flow control solutions. General Industrial Oil & Gas/Refining Power Other
For more information on CRANE Energy Flow Solutions, please visit our website at: www.craneenergy.com.
1942To meet wartime demand, CRANE increases
steel valve output capacity four-fold to 25,000 tons annually. The U.S. Navy requires from 1,500 to
15,000 valves per ship.
1951After the war, CRANE supplies flow control products
for aircraft. Hydro-Aire, a manufacturer of highly developed precision aircraft products is acquired.
1957CRANE introduces “Technical Paper 410”, building on the classic “Flow of Fluids” of 1942. Today, this quintessential guide to understanding the flow of
fluids through valves, pipes and fittings is available as software.
1959T.M. Evans is elected Chairman and CEO. A new management philosophy moves CRANE
to streamline the distribution network and concentrate on industrial manufacturing.
1960sIndustrial expansion is furthered through domestic and international acquisitions such as Chapman Valve, Cochrane Corporation, Deming Company
and Chempump.
1969CRANE pumps are on the moon. Hydro-Aire and Chempump pumps are used in the Gemini and
Apollo Space programs.
1970sCRANE is well-positioned in four major areas of concentration: fluid and pollution control, steel,
building products and aircraft/aerospace.
1980sCRANE exits the plumbing and plumbing
distribution businesses in the U.S.
1981CRANE provides braking system for the first NASA
space shuttle.
1984R.S. Evans elected Chairman and CEO.
1990sEvans leads CRANE as a growth company
with strong acquisition program in areas of fluid handling, engineered materials, merchandising
systems, aerospace and controls.
2001Eric C. Fast elected President and CEO. He
continues strategic leadership of a collection of linked businesses to move CRANE from a holding
company to an operating company.
Early 2000sFoundation for future profitable growth is laid with the implementation of new Operational Excellence tools, greater development of intellectual capital,
strategic linkages and strong customer focus.
2005CRANE celebrates its 150th anniversary.
Post-2005The strong foundation laid in the early part of
the decade enables CRANE to make significant acquisitions in the Merchandising Systems,
Engineered Materials and Controls segments. At the same time, the Company implements a disciplined,
Company-wide business system and realigns businesses in all segments to focus on customer
solutions that create value and deliver results.
Company Overview
www.craneenergy.com
8
CRANE Energy and Power GenerationSince its founding in the 1800s, CRANE Company has been providing flow control solutions to the power generation industry. From simple wedge gate valves for steam isolation on the first steam locomotive power plants, to high pressure, large bore pressure seal parallel disc gate valves on modern supercritical power plant designs, we have supplied superior solutions for the most difficult applications in the industry.
Today, CRANE Energy Flow Solutions has one of the most diverse and technically advanced valve portfolios in the world. Our world-renowned brands such as Pacific, CRANE, Krombach, Stockham, and others, are synonymous with quality and durability. If you are involved in the construction of a new power generation facility, or in the operation and maintenance of an existing power plant, we can provide the right valve at the right price at the right time. Our engineers will work with you hand-in-hand to find the optimal solution for your specific application.
We have one of the largest installed bases of products in power generation that can be found anywhere on the planet. Our track record of proven performance and long list of satisfied customers are testaments to our superior customer service, product quality, and technical expertise.
On the following pages we will show you the portfolio we can offer for your power generation facility. We can provide flow control solutions for a wide variety of power generation technologies, including sub-, super-, and ultra super-critical coal-fired power plants, nuclear power plants, simple cycle gas-fired or alternative fuel-fired power plants, combined cycle power plants, concentrated solar power plants, geothermal power plants and hydroelectric power plants.
Challenge us with your most difficult applications today and let us show you what we can do.
Our Customers:
Engineering Procurement Companies
(EPC)
Boiler and HRSG OEMs
Turbine OEMs
Air Quality Control Systems OEMs
Industrial Cogeneration Facilities
Engineering & Construction Companies (E&C)
Architect & Engineering Companies
Mechanical Contractors
Maintenance & Reliability Departments
Universities and Hospital Heat & Power Plants
Utility Power Plants
BioFuel Producers
Power Generation
www.craneenergy.com
9
CRANE Nuclear, Inc. Significant Events
1952 - Present.
1952
Nuclear Valves are manufactured and
supplied to the US Navy.
1956
CRANE manufacturers and supplies first gate
valve for commercial nuclear power plant
(Shippingport).
1959
CRANE acquires Chapman Valve Co. for
TDCV capabilities.
1971
CRANE becomes the first US manufacturer
authorized to use the ASME “N” symbol for
both valves and weld fittings.
1985
CRANE acquires Aloyco and license to
manufacture Walworth nuclear replacement
parts and valves.
1992
Flowmatics Control Valve line is transferred
from CRANE-Chempump to CRANE-Aloyco.
1994
CRANE acquires the Mark Controls Valve
Companies - Pacific Valves, Flowseal and
Center Line.
CRANE-Aloyco becomes
“CRANE Valves Nuclear Operations.”
1996
CRANE Valves Nuclear Operations expands
into a new valve manufacturing facility in
Bolingbrook, Illinois.
1997
CRANE acquires ITI Movats from
Westinghouse.
1998
CRANE Valves Nuclear Operations and
CRANE Movats become “CRANE Nuclear, Inc.”
2001
CRANE acquires XOMOX Corporation from
Emerson.
Superior Support, Safe Products and Unparalleled Knowledge CRANE Nuclear is a leading provider of valves and related services for domestic and international nuclear power plants. Our commitment to superior technology, product development, and strategic alliances make us a leader in the nuclear power industry.
As part of the CRANE Energy Business Unit within the Fluid Handling Business Segment of the CRANE Corporation, CRANE Nuclear employs some of the industry’s brightest minds who continuously offer innovative and reliable solutions for the production and maintenance of nuclear valves and valve testing equipment.
CRANE Nuclear’s first nuclear valve was manufactured in 1952, and since then nuclear power plants worldwide have come to rely on us for valve testing products that help ensure nuclear plant safety through the reliable performance of safety related motor-operated valves, air-operated valves, and check valves.
The Premier Valve Manufacturer for Nuclear Power PlantsValves and Valve PartsWith superior engineering and manufacturing capabilities and processes, CRANE Nuclear’s nuclear-grade valves and replacement parts carry industry leading lead times, and a heritage of innovation.
Nuclear ServicesUsing a scope-based, process-driven approach, CRANE Nuclear is the industry leader in providing valve service solutions to nuclear power plants worldwide.
In addition, CRANE Nuclear offers a diverse curriculum of training courses specifically designed to help nuclear power utilities keep their workforce abreast of the latest technological advances in air-operated, motor-operated, and check valve diagnostics, as well as valve and actuator maintenance and repair.
Testing ProductsFor over 25 years, CRANE Nuclear has played an unparalleled role in maintaining the health of critical valves and actuators, as the pioneer in the design and manufacture of integrated, portable, and online valve diagnostic technology.
CRANE Nuclear is NUPIC-audited, and holds ASME N-Stamp, NPT-Stamp, NR, and VR certifications.
For more information on CRANE Nuclear, please visit our website at: www.cranenuclear.com.
CRANE Nuclear Overview
www.craneenergy.com
10
Combined Cycle Plant
Water Treatment
Cooling Water Circulation
Fuel Storage & Distribution
Gas Pipeline
Combustion Turbine
Flash Tank
Economizers
SCR Storage & Injection Steam Turbine with Condenser
Process & Export Steam
Deaerator
Feed Water Distribution Make-up Water
Heat Exchanger
Condensate Pumps
Evaporator
LP Drum Deaerator
19
16
12
4
10
13
9
6
8
7
5
1112 3 2 2
11
15
1414 1414 1414
17
18
1. Drums (HP, IP, LP) Check Valves Isolation Valves Non-return Valves Vent & Drain Valves
2. Superheater (HP, IP, LP) Check Valves Isolation Valves Vent & Drain Valves
3. Reheater Check Valves Isolation Valves Vent & Drain Valves
4. Steam Turbine with Condenser Extraction/Induction Check Valves Main Steam Isolation Drain Valves
5. Cooling Water Circulation Butterfly Valves Check Valves Isolation Valves
6. Water Treatment Butterfly Valves Check Valves Isolation Valves
7. Condensate Pumps Butterfly Valves Check Valves Isolation Valves
8. Heat Exchanger Check Valves Isolation Valves Vent & Drain Valves
9. Make-up Water Butterfly Valves Check Valves Isolation Valves Lined Valves Strainers
10. Deaerator Check Valves Isolation Valves Vent & Drain Valves
Combined Cycle Power Plant
www.craneenergy.com
11
Combined Cycle Plant
Water Treatment
Cooling Water Circulation
Fuel Storage & Distribution
Gas Pipeline
Combustion Turbine
Flash Tank
Economizers
SCR Storage & Injection Steam Turbine with Condenser
Process & Export Steam
Deaerator
Feed Water Distribution Make-up Water
Heat Exchanger
Condensate Pumps
Evaporator
LP Drum Deaerator
19
16
12
4
10
13
9
6
8
7
5
1112 3 2 2
11
15
1414 1414 1414
17
18
11. LP Drum Deaerator Check Valves Isolation Valves Vent & Drain Valves
12. Process & Export Steam Check Valves Isolation Valves Vent & Drain Valves
13. Feed Water Distribution (HP, IP, LP) Butterfly Valves Check Valves Isolation Valves Metal Seated Ball Valves
14. Economizers (HP, IP, LP) Check Valves Isolation Valves Vent & Drain Valves Metal Seated Ball Valve
15. Flash Tank Check Valves Isolation Valves Vent & Drain Valves
16. SCR Storage & Injection Butterfly Valves Check Valves Isolation Valves
17. Combustion Turbine Butterfly Valves Check Valves Isolation Valves
18. Fuel Storage & Distribution Butterfly Valves Check Valves
19. Gas Pipeline (custody transfer station) Butterfly Valves Check Valves Isolation Valves
www.craneenergy.com
12
Pulverized Coal Power Plant
Water Treatment
Cooling Water Circulation
Steam Turbine with Condenser
Heat ExchangerCondensate Pumps
Make-up Water
SCR Storage & Injection
Fuel Storage & Distribution
Flash Tank
Drum Superheater Reheater
Burners
Coal Pulverizers
Mud Drums
Soot BlowersHigh Pressure
Heaters
Ash Handling
Bag House
Scrubber
Precipitator
EvaporatorBFWP Turbine
Boiler Feed Booster Pumps
Low Pressure Heaters
Deaerator
1 2 3
4
5
8
7
9
6
10
13
1114
15
18
17
16
19
20
21
22
23
24
25
26
12
Economizer
Coal-fired Power Plant1. Drums Check Valves Isolation Valves Non-return Valves Vent & Drain Valves
2. Superheater Check Valves Isolation Valves Vent & Drain Valves
3. Reheater Check Valves Isolation Valves Extraction Check Valves Vent & Drain Valves
4. Steam Turbine w/ Condenser Drain Valves Extraction Check Valves Main Steam Isolation
9. Low Pressure Heaters Check Valves Isolation Valves
10. Deaerator Check Valves Isolation Valves Vent & Drain Valves
11. Evaporator Check Valves Isolation Valves Vent & Drain Valves
12. Make-up Water Check Valves Isolation Valves Vent & Drain Valves Strainers
5. Cooling Water Circulation Check Valves Isolation Valves Butterfly Valves
6. Water Treatment Butterfly Valves Check Valves Isolation Valves
7. Condensate Pumps Check Valves Isolation Valves
8. Heat Exchanger Check Valves Isolation Valves Vent & Drain Valves
www.craneenergy.com
13
Pulverized Coal Power Plant
Water Treatment
Cooling Water Circulation
Steam Turbine with Condenser
Heat ExchangerCondensate Pumps
Make-up Water
SCR Storage & Injection
Fuel Storage & Distribution
Flash Tank
Drum Superheater Reheater
Burners
Coal Pulverizers
Mud Drums
Soot BlowersHigh Pressure
Heaters
Ash Handling
Bag House
Scrubber
Precipitator
EvaporatorBFWP Turbine
Boiler Feed Booster Pumps
Low Pressure Heaters
Deaerator
1 2 3
4
5
8
7
9
6
10
13
1114
15
18
17
16
19
20
21
22
23
24
25
26
12
Economizer
13. Boiler Feed Booster Pumps Check Valves Isolation Valves
14. BFWP Turbine Check Valves Isolation Valves Vent & Drain Valves
15. High Pressure Heaters Check Valves Isolation Valves Extraction Check Valves Vent & Drain Valves Metal Seated Ball Valves
16. Economizer Check Valves Isolation Valves
17. Soot Blowers Check Valves Isolation Valves
18. SCR Storage & Injection Check Valves Isolation Valves
19. Bag House Isolation Valves
20. Scrubber Isolation Valves
21. Precipitator Isolation Valves
22. Coal Pulverizers Isolation Valves
23. Burners Isolation Valves
24. Fuel Storage & Distribution Check Valves Isolation Valves
25. Flash Tank Check Valves
26. Ash Handling Isolation Valves
www.craneenergy.com
14
Cooling Tower
Hot Salt Tank
Heated Collecting Main Pipe
Electric Generator
1 2 3 4
Natural Gas Boiler
Thermal Storage
Cold Salt Tank
Feed & Condensate System
Solar Field
Cooled Collecting Main Pipe
Steam Turbine
Condenser
Degasification
Solar Warmer
Solar Pre-Warmer
Solar Steam Generator
Solar Warmer
Expansion Tank
Oil-Salt-OilHEX
Solar Collectors
Low Pressure Warmer
5Steam System Circulating Water
System
Parabolic Trough Technology
1. Solar Field 3-way Valves Check Valves Control Valves Heat Transfer Fluid (HTF) Isolation Valves
2. Thermal Storage Check Valves Control Valves HTF Isolation Valves
3. Steam System Check Valves Cold Reheat Non-Return Check Valves HP/HT Isolation Valves Non-Return Valves Vent & Drain Valves
4. Feed & Condensate System Check Valves Control Valves Isolation Valves
5. Circulating Water System Check Valves Isolation Valves
www.craneenergy.com
15
Steam Condenser(air-cooled)
Feedwater Reheater
Movable Solar Reflectors
Steam Turbine
Steam Drum
Pipe Receivers
TurbineGenerator
2
1Steam System
Feed & Condensate System
Cooling Tower
Hot Salt Tank
Heated Collecting Main Pipe
Electric Generator
1 2 3 4
Natural Gas Boiler
Thermal Storage
Cold Salt Tank
Feed & Condensate System
Solar Field
Cooled Collecting Main Pipe
Steam Turbine
Condenser
Degasification
Solar Warmer
Solar Pre-Warmer
Solar Steam Generator
Solar Warmer
Expansion Tank
Oil-Salt-OilHEX
Solar Collectors
Low Pressure Warmer
5Steam System Circulating Water
System
Compact Linear Fresnel Refl ector Technology
1. Steam System Check Valves HP/HT Isolation Valves Non-Return Valves Vent & Drain Valves
2. Feed & Condensate System Check Valves Control Valves High Pressure Isolation Valves Low Pressure Isolation Valves
5. Circulating Water System Check Valves Isolation Valves
www.craneenergy.com
16
Cooling Tower
23
4
1
Process Water
Limestone Slurry Tank
5
Reclaim Water Tank
Limestone Slurry Preparation Dewatering System
Waste Water System
Process Water Circulation
6 Gypsum System
7 Oxidation Air System
Booster FanID Fan
Stack
Flue Gas from ESP
Limestone Powder Silo
Gypsum Silo
Waste Water
Oxidation Air
Limestone
GypsumRecycling Pump Absorber Slurry Service Isolations
Vacuum Belt Filter
Absorber
Gas-gas Heater
CRANE High Integrity Slurry Service Butterfly Valves have been the superior solution for FGD service worldwide since 1972 Our engineers determine the proper valve size and materials for your unique applications.
Coal-fired Power Plant1. Recycling Pump - Absorber Slurry Service Isolation Valves
2. Limestone Slurry Preparation Butterfly Valves
3. Dewatering System Butterfly Valves Diaphragm Valves
4. Waste Water System Butterfly Valves Diaphragm Valves
5. Process Water Circulation Butterfly Valves Ball Valves Diaphragm Valves
6. Gypsum System Butterfly Valves Diaphragm Valves
7. Oxidation Air System Butterfly Valves
Flue Gas Desulphurization
www.craneenergy.com
17
Bill of MaterialsBody: Ductile IronDisc: Hastelloy®, Superduplex, Stainless Steel, Hostalen GURCartridge Seat: EPDM with Back-up Rigid RingShaft: Stainless SteelOperation: Handwheel, Gear, Electric, Pneumatic, Hydraulic
Resilient Seated Butterfly Valves, NPS 48" in Power Station, Germany, in 1993 after 10 years in service.
View from inside scrubber towards recycling pump impeller. Note the typical abrasion on the pump impeller and smooth finish of valve edges.
Resilient Seated Butterfly Valves, NPS 32" in Power Station, Germany, in 1994 after pump discharge.
Note the compact and clean installation.
High Integrity Slurry ServiceASME Class: 150PN: 10 - 16Sizes: 2" - 54" DN: 50 - 1350Body Configurations: Wafer, Lug or Double FlangedTemperature Range: to 165°F / 74°C
Features & Benefits:Tailored/customized for each service application•Tight shut-off•Replaceable/retained cartridge seat•
- Smooth finish disc - High quality materials - 2 wetted parts
Corrosion/abrasion resistant•Low cost of installation•Compact installation•Low total cost of ownership•Easy automation with ISO top flange•Proven longevity•
Hastelloy® is a registered trademark of Hayes International.
High Integrity Slurry Service Valves
www.craneenergy.com
18
Pressure Seal GateBrand: PacificASME Class: 600 - 4500Sizes: 2½" - 36" DN: 65 - 900Materials: Carbon Steel, AlloyConnections: Butt Weld, Flanged
Features & Benefits:Gate valves offered in two designs: parallel disc and•
flexible wedgeProvides superior shutoff service for your high pressure•
and temperature applicationsThe parallel disc gate valve eliminates excessive•
leakage, thermal binding and maintenance with: Spring-loaded discs that seal with differential 1. pressure and self adjust for thermal growth and pipe stresses – the higher the differential pressure the tighter the seal Integrally cast body stops that eliminate over travel 2. and prevent wire drawing or steam cutting of seats Fully guided carrier assembly which is position 3. seated rather than torque seated Parallel seating components that are hard-faced and 4. self cleaning, ensuring extended life Lower torque requirements allowing smaller 5. actuation packages Easy in-line repair and fitting6.
Bolted Bonnet GateBrands: Aloyco, CRANE, Jenkins, Krombach, Pacific, Stockham, TriangleASME Class: 150 - 1500Sizes: 2" - 36"Materials: Carbon Steel ASTM Grade A216 WCB is standardConnections: Flanged, Butt Weld
Features & Benefits:Body is cast with straight through ports to minimize•
turbulence, erosion and pressure drop are minimizedSeat rings are seal welded to eliminate leak•
path behind rings and for long trouble-free serviceOur one piece flexible disc provides accurate alignment of•
mating seating surfaces so the valve can absorb piping strains without leakage and avoids any tendency to stick in the seated position
Packing contains corrosion inhibitor to avoid stem pitting•Stuffing box is deep, assuring long packing life•Gland Eyebolts swing aside for ease in repacking the•
stuffing box
Isolation Valves
www.craneenergy.com
19
Bolted Bonnet GlobeBrands: CRANE, Jenkins, Krombach, Pacific, StockhamASME Class: 125 - 600Sizes: ½" - 12"Materials: Carbon Steel ASTM Grade A216 WCB is standardConnections: Flanged, Butt Weld
Features & Benefits:Available in both globe stop and stop-check (non-return) configurations our globe valves are designed for services requiring frequent operation and throttling when pressure drop across the valve is about 20% of inlet pressure.
Body is cast with heavy sections reinforced at points• subjected to the greatest stress
Seat ring welded in to eliminate leak path•Disc stem ring connects the disc to the stem, permitting•
the disc to swivel and aid in securing tight seating for trouble-free service
Gland eyebolts are securely fastened to the bonnet yet• swing away to permit easy access to the stuffing box
Bonnet gasket provides a positive seal against leakage,• Class 150 and 300 valves have a male/female bonnet joint
A ring-type gasket is employed in Class 600•
Stop Check valves are designed for steam applications from 100 to 375 psi (9-26 bar). Available in straightaway configurations for upward flow, and angle configurations for “horizontal-downward” or “upward-horizontal” flow.
Pressure Seal GlobeBrand: PacificASME Class: 600 - 4500Sizes: 2" - 24" DN: 65 - 600Materials: Carbon Steel, Stainless SteelConnections: Butt Weld, Flanged, Venturi
Features & Benefits:Available in both y-pattern and t-pattern, as well as•
both globe stop and stop-check (non-return) configurations, bodies with streamlined flow path to minimize pressure drop
Fully body-guided discs for perfect seating in high• pressure service
Disc, seat rings, and backseat have hardened surfaces• for maximum service life
Stainless steel, precision ground stems to minimize• packing friction
Two-piece, self-aligning glands•Fully fabricated yokes designed to withstand seismic•
activity, while offering easy maintenance and actuator mounting
Isolation Valves
www.craneenergy.com
20
Pressure Seal CheckBrand: PacificASME Class: 125 - 3500Sizes: 2" - 36"DN: 50 - 900Materials: Iron, Carbon Steel, StainlessConnections: Flanged, Weld-End
Features & Benefits:Tilting Disc, Y-Pattern Lift, and T-Pattern Lift Configurations
The tilting disc check valve uses gravity to rapidly close• the disc upon flow reversal
Valve design fully opens or closes through an arc of• only 45 degrees, (unlike most other tilting disc check valves which must swing through a 90 degree arc)
Conical seating is self aligning, tight, and always closed• in a no-flow situation
Provides tight shutoff in vertical installations•Hard-faced seating surfaces, large diameter hinge pins,•
and corrosion resistant bearing surfaces ensure long life, and an internal disc stop prevents flutter
The internal disc hanger provides adjustable alignment• and eliminates body wall penetrations
Bolted Bonnet Swing CheckBrands: CRANE, Pacific, TriangleASME Class: 125 - 600Sizes: 2" - 24"Materials: Iron, Carbon Steel, StainlessConnections: Flanged, Butt Weld
Features & Benefits:Used to prevent reversal of flow in horizontal pipe lines •There is no tendency for the seating surfaces to gall or•
score, because the disc meets the flat seat squarely without rubbing contact upon closing
Can be furnished with outside lever and adjustable weight• in certain sizes, to assist in closing the valve more rapidly, thus minimizing reversal of flow and resultant surge and shock
With the lever and weight mounted to balance the weight• of the disc, the valve becomes more sensitive to low flow velocities
Also available in a tilting disc configuration•
Flow Reversal Protection Valves
www.craneenergy.com
21
Dual Plate CheckBrands: Duo-Chek, Center Line, StockhamASME Class: 125 - 4500Sizes: 2" - 84"DN: 50 - 2100Materials: Iron, Bronze, Steel, Stainless Connections: Wafer, Lugged, FlangedStandards: ASME, DIN, JIS, AS
Features & Benefits:Lightweight & compact compared to the traditional swing•
check valveSpring assisted closure (independent spring design),•
plates are more responsive to changes in flow conditionsFaster response time improved by the use of independent•
springs and support sleeves, minimizes water hammer risks for non slam applications
Retainerless design available (no fugitive emission to• atmosphere, valve is inherently fire-safe)
Choice of spring torques to suit critical velocity systems• and improve valve response time
Nozzle Check (Compact & Full Body)Brands: Compac-Noz, Noz-Chek ASME Class: 150 - 4500Sizes: 2" - 84"DN: 50 - 2100Materials: Iron, Steel, StainlessConnections: Flanged, Hub-End, Weld-End Standards: ASME, DIN, JIS
Features & Benefits:Engineered and sized for the application, not the line size•One piece body casting (no body penetration, no fugitive•
emission to atmosphere)One moving part resulting in minimum wear and long life•Short stroke length resulting in quick dynamic response•
and minimizing the reverse velocity through the valve, thus preventing water hammer risks
Suitable for reciprocating compressor service (removal of• chatter effects frequently associated with conventional check valves)
Stable behavior due to the Venturi type design, the• opening characteristics ensure a fully opened check valve
Choice of spring torques to suit critical velocity systems• and improve valve response time
Anti-spinning device to stabilize disc•Tight shut-off•Maintenance free design•
Flow Reversal Protection Valves
www.craneenergy.com
22
Extraction Check / Cold Reheat Non-Return Check ValvesBrand: KrombachASME Class: 150 - 300PN: 16 - 40Sizes: 6" - 72" (others upon request)DN: 150 - 1800 (others upon request)Materials: Steel, Stainless Steel, Welded DesignConnections: Double Flanged, Butt Weld Ends
Optional Features:Free swinging disc•Hardened seating surfaces•Canted seat angle•Hardened bushings•Graphite packing•Counterweights & actuation packages available•Customized seat diameter & disc thickness to minimize•
pressure dropSpecial face-to-face dimensions, flanges, and materials•
availableSpecial approvals (ASME, CRN, IBR)•
Triple OffsetBrands: Flowseal MS, KrombachASME Class: 150 - 600PN: 10 - 100Sizes: 3" - 96"DN: 100 - 2400Materials: Carbon Steel, Stainless Steel, Special MaterialsBody Styles: Lugged, Double Flanged Short or Long Pattern, Butt Weld Ends, Customize Ends
Features & Benefits:Bi-directional gas tightness•Innovative self-centering, flexible disc sealing•Pure graphite - spring loaded shaft packing•Design flexibility provides customized solutions•TA-Luft approved•Optimal torque transmission•Fire-safe design according to EN ISO 10497•
Note: special configuration Turbine Trip & Throttle Valve with customized quick-closing actuation package.
Turbine Trip & Throttle Valve
Special Application Valves
www.craneenergy.com
23
Double Eccentric ButterflyBrands: KrombachASME Class: 150 - 600PN: 10 - 40Sizes: 4" - 136"DN: 100 - 3400Materials: Welded Body, Resilient SeatedBody Styles: Double Flanged Short or Long Pattern, Custom Ends
Features & Benefits:Soft seat design provides tight shut-off•Optimal flow profile of disc•Hard rubber coating for heavy duty installations possible•Automated valves: pneumatic, electric and hydraulic•
High Performance ButterflyBrands: Flowseal, StockhamASME Class: 150 - 600Sizes: 2" - 48"DN: 50 - 1200Materials: Aluminum Bronze, WCB, CF8MBody Styles: Wafer, Lugged (Double Dead End)
Features & Benefits:Soft seat design provides bubble tight shut-off•Metal seated; ASME Class IV Leakage•Wafer and lug body styles•ASME pressure classes 150, 300 and 600 •Firesafe, Meets API 607, Rev. 4•MSS-SP-68•Unparalleled service in vacuum-to-low pressure•Automated valves: pneumatic, electric and hydraulic•
Special Application Valves
www.craneenergy.com
24
Resilient-Seated Concentric ButterflyBrands: Center Line, CRANE, Jenkins, Krombach, StockhamASME Class: 150 CWPSizes: 1½" - 54"DN: 40 - 1350Materials: Cast Iron, Ductile Iron, WCB, CF8MBody Styles: Wafer, Lugged, Double Flanged
Features & Benefits:•Qualifiedforbothgaseousandliquidservice•Positiveshut-offbi-directionally•Phenolicbackedcartridgeseat•PTFEbushingstandard•Lockinghandlestandard(2"-12")•Endoflineservicestandardonlugstyle•Easeofautomation•Fieldrepairable(2"-24")•Completesizerange:1½"-54"
Metal Seated BallBrand: KrombachASME Class: 150 - 4500PN: 10 - 600 Sizes: ½" - 16"DN: 15 - 400Materials: Carbon Steel, Stainless Steel, Special MaterialsConnections: Flanged, Welded, ThreadedBody Style: Two-Piece
Features & Benefits:Low repair cost (single parts exchangeable)•Bi-directional with repeatable zero leakage•Firesafe and anti-static (API and BS)•Anti-blowout stem•Highest life span•Best technical solutions•Best after sales service•Optimal torque transmission•International standards and rules (DIN and ASME)•High temperature applications to 800°C or 1500°F•Highest reliability over 20 years of proven design and•
manufacturing experience
Special Application Valves
www.craneenergy.com
25
T-Type/Basket Strainer & Engineered Strainer AssembliesBrand: Krombach Pressure Class: Per Customer RequirementsSize: Per Customer Requirements Material: Per Customer RequirementsBody Style: Per Customer Requirements
Features & Benefits: Differential pressure indicators•Stands•Cover Lifts•Vent and drain valves•Special coatings •Heating or cooling jackets•
Hat Type StrainerBrand: KrombachASME Class: 150 - 300PN: 10 - 40Sizes: 1" - 48"DN: 25 - 1200Materials: Steel, Stainless Steel, Special MaterialsBody Style: Fully Welded Construction
Features & Benefits:Cover lift and swivel devices•Differential pressure connections/indicators•Vent & drain connections/valves•Special materials•Special painting/coating•Internal rubber lining•Gasket according to TA-Luft for Fugitive Emissions•Special sealing surface•Oil & grease-free (for O• 2)Heating or cooling jackets•Special mesh sizes•
Y-Type StrainerBrand: KrombachASME Class: 150 - 1500PN: 6 - 400 Sizes: ½" - 14"DN: 15 - 350Screen: Stainless SteelMaterials: Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron, Special MaterialsBody Styles: Flanged, Welded, Threaded
Features & Benefits:Cover lift and swivel devices•Differential pressure connections/indicators•Vent & drain connections/valves•Special materials•Special painting/coating•Internal rubber lining•Gasket according to TA-Luft for Fugitive Emissions•Special sealing surface•Oil & grease-free (for O• 2)Heating or cooling jackets•Special mesh sizes•
Strainers & Specialty Products
www.craneenergy.com
26
Original Equipment Manufacturer (OEM) for 155 yearsCRANE Valves Services is the OEM replacement part provider for all CRANE brands including Chapman and Flomatics. Our archives hold over thousands of drawings, bills of materials, material specifications and processes for valves supplied as early as the 1900’s. We deliver the parts you need based on the original specifications and by using original parts your valve will have the greatest chance of functioning at its best.
High-Quality ManufacturingUsing high-quality materials, state-of-the-art processes and ultra-modern machining equipment, CRANE Valve Services reproduce parts to match the original print. The end result is reliability you can count on for years to come.
Delivered Fast Using QuickShipSM
To meet our customers’ urgent requirement for replacement parts, CRANE Valve Services has developed a program called QuickShipSM. This program is designed so that the most common wear components, in the most popular sizes, can be shipped within days.
Valve ExpertsThrough our national network of service centers and authorized repair centers, our team of factory trained professionals offers expert, dependable repair and reconditioning work, fast turnaround and warranted performance on just about any valve. Call one of our expert part specialists today to help with all your OEM needs.
OEM Parts provided for:
Aloyco
Center Line
Chapman
CRANE
Duo-Chek
Flomatics
Flowseal
Krombach
Pacific Valves
Stockham
Customer Service
Experienced•
Knowledgeable•
Responsive•
For more information on valve
replacement parts, please visit
our website at:
www.cranevalveservices.com
or call 1-800-272-6315
Valve Replacement Parts
www.craneenergy.com
27
The following is a partial list of certificates held by CRANE Energy Flow Solutions. All certificates are available upon request.
ASME 16.34, 16.10, 16.5, 16.25•ISO 9001: 2000 (Det Norske Veritas, TÜV)•ISO 14001:2005 (TÜV Nord)•Zertifikat DGRL Certificate PED (TÜV Nord)•Directive 97/56/EG•API 6D•QS - Certificate of Assessment PED (Det Norske Veritas)•Technical Standards & Safety Authority•Laboratorio De Pruebas De Equipos Y Materiales•Welding Procedure Approval (Det Norske Veritas)•Russian GOST R•Water Regulation Advisory Scheme•Design Assessement (American Bureau of Shipping)•Konformitätserklärung ATEX - Declaration of Conformity ATEX•DVGW - Baumuster-Prüfzertifikat Gasversorgung (DVGW Zertifizierungsstelle)•Certificate of Recognition (Bureau Veritas)•AD 2000-Merkblatt HP 0/TRD 201/GGVE/GGVS•AD 2000-Merkblatt A4•Shipbuilding approval according to MODE IBV/Mode II •EN 729-2•KTA 1401•TA Luft 2000•API 622 emissions testing•EPA Method 21 emissions testing•CE•10CFR50 Appendix B•ASME N45.2•ASME N-Stamp N-2 899•ASME NPT Stamp N-2900•ASME NCA-4000•ASME NB Registration•Repair and Testing of Valves and Actuators in Compliance with 10CFR.50 •Appendix B and ASME NQA-1“NR”- Field Repair or Replacement of Class 1, 2, & 3 Line Valves and Section III •Class 1, 2 and 3 Pressure Relief Devices“VR”- Field Repair of ASME Section I, III and VIII PRV•
CRANE Helping CRANE
Innovative thinking goes on at all levels of our company,
wherever CRANE employees confront problems, deal with unforeseen contingencies,
or work around obstacles to normal procedures. Our goal is to harvest all the lessons — from the front lines and
back offices — to create a rich exchange of fresh insights
about products, technology and work practices. The key is to
collaborate: to share what you know to benefit others.
Make It Ugly
Put it under the microscope. Don’t dress up the facts. Face up to where you really are, so all of us can easily understand
the problem and generate a solution that will really work.
By using this honest self-assessment process as a
measurement tool, we identify the pain points quickly, make improvements, and exceed
expectations. At CRANE, telling it straight never gets old.
Quality & Certifi cations
www.craneenergy.com
28
Houston, Texas
Long Beach, California
Cullman, Alabama
St. Louis, Missouri
Chihuahua, Mexico
South AmericaCovered by Global Headquarters
Shenandoah, TexasConroe, Texas
Headquarters
Manufacturing Site
Sales Office
Engineering Office
Services Facility
Warehouse
United States
Conroe, Texas Office9860 Johnson RoadMontgomery, Texas, USA 77316Tel: +1-936-588-8380Fax: +1-936-588-8381
United States
Cullman, Alabama Office2129 3rd Avenue SECullman, Alabama, USA 35055Tel: +1-256-775-3800Fax: +1-256-775-3860
United States
Long Beach, California Office3201 Walnut AvenueSignal Hill, California, USA 90755Tel: +1-562-426-2531Fax: +1-562-595-9717Email: [email protected]
United States
St. Louis, Missouri Office3671 New Town Blvd.St. Charles, Missouri, USA 63301Tel: +1-636-688-8750Fax: +1-636-688-8755
United States
CRANE Energy Global Headquarters4526 Research Forest Drive, Suite 400The Woodlands, Texas 77381 U.S.A.Tel: +1-936-271-6500Fax: +1-936-271-6510
EUROPE Belgium
Wavre, Belgium OfficeAvenue Franklin No. 1B-1300 Wavre, BelgiumTel: +32-10-8184-44Fax: +32-10-8184-58
Germany
Düsseldorf, Germany OfficeHeerdter Lohweg 63-71, D-40549 Düsseldorf, GermanyTel: +49-211-59-56-0Fax: +49-211-59-56-111
United States
Houston, Texas Office1202 Hahlo Street Houston, TX USA 77220 Tel: +1-713-671-4600Fax: +1-713-671-4745
Germany
Kreuztal, Germany OfficeMarburger Straße 36457223 Kreuztal-Kredenbach GermanyTel: +49-0-2732-520-00Fax: +49-0-2732-520-100Email: [email protected]
Major Sales Offices
Russia
Moscow, Russia OfficeOffice No. 10 Nizhniy Mezhdunarodny Pereulok, 10, Strojenie 1 Moscow 109544 RussiaTel: +7-495-9845591Fax: +7-495-9845590
United Kingdom
Belfast, Ireland Office6 Alexander Road Belfast, BT6 9HJ Northern IrelandTel: +44-2890-704222Fax: +44-2890-401582
Italy
Monza, Italy OfficeVia Pusiano, 2 Monza, 20052 (MI) ItalyTel: +39-039-270-4373Fax: +39-039-270-4431
United States
Kennesaw, Georgia Office2825 Cobb International Blvd.Kennesaw, Georgia 30152Tel: +1-770-424-6343Fax: +1-770-429-4750
AMERICAS United States
Bolingbrook, Illinois Office860 Remington Blvd.Bolingbrook, Illinois 60440Tel: +1-800-272-6315Fax: +1-630-226-4646Email: [email protected]
Kennesaw, Georgia
Bolingbrook, Illinois
CRANE Energy‘s Worldwide Facilities
www.craneenergy.com
29
Düsseldorf, Germany
Belfast,Ireland
Wavre, Belgium
Dubai, United Arab Emirates
Bangkok, Thailand
Ningjin, China
AfricaCovered by European Offices
Shanghai, China
Sydney, Australia
Tianjin, China
Pune, India
Moscow, Russia
Perth, Australia
Victoria, Australia
Virginia, Australia
Beijing, China
Yokohama, Japan
Bekasi, Indonesia
Busan, Korea
Mulhouse, France
Viralimalai, India
Kreuztal, Germany
Muta & Ravne, Slovenia
ASIAChina
Beijing, China Office6A Jianguomenwai Avenue Chaoyang DistrictBeijing 100022 PR ChinaTel: +86-10-65639000Fax: +86-10-65630706
China
Shanghai, China Office33F Huaihai Plaza, No. 1045 Central Huaihai Rd.Shanghai 200031 PR ChinaTel: +86-21-6127-3000Fax: +86-21-6473-3688
India
Pune, India OfficeAmar Avinash Corporate Plaza7th Floor, Plot No. D2 C.T.S. No. 11/1 to 11/4Near Inox Multiplex, Bund Garden Rd.Pune 411 001 IndiaTel: +91-20-3054-6100Fax: +91-20-2605-0927
Indonesia
Bekasi, Indonesia OfficeDelta Silicon Industrial ParkJl. Akasia raya Blok AE No. 49Lippo Cikarang, Bekasi 17550 IndonesiaTel: +62-21-8990-7980Fax: +62-21-8990-7985
Japan
Yokohama, Japan Office691-2 Nippa-Cho, Kouhoku-kuYokohama, Kanagawa 223-0057 Japan Tel: +81-45-534-1450Fax: +81-45-534-1458
Korea
Busan, Korea Office1610-6, Songjung-Dong Kangseo-Ku Noksan Industrial ComplexBusan 618-270 KoreaTel: +82-51-831-6930Fax: +82-51-831-6933
Thailand
Bangkok, Thailand Office55/162, Moo 6, Moobaan KlangMuangYothinpattana RoadLadprao, Bangkok, Thailand 10260Tel: +66-02-515-0009-10Fax: +66-02-515-0220
AUSTRALIAAustralia
Brisbane, Australia Office4/36 Pritchard RoadVirginia, Queensland 4014 AustraliaTel: +61-7-3865-3522Fax: +61-7-3865-7252
Australia
Melbourne, Australia OfficeUnit 1-40 Barrie RoadTullamarine, Vic 3043 AustraliaTel: +61-3-8318-4300Fax: +61-3-9338-3422
Australia
Perth, Australia Office3 Miles RoadKewdale, Western Australia, 6105 AustraliaTel: +61-8-9353-1530Fax: +61-8-9353-1569
Australia
Sydney, Australia Office146-154 Dunheved CircuitSt. Marys, NSW 2760 AustraliaTel: +61-2-9623-0234Fax: +61-2-9673-3870
MIDDLE-EAST United Arab Emirates
Dubai, United Arab Emirates Office P.O. Box 17415Jebel Ali Free ZoneDubai, United Arab EmiratesTel: +971-4-8864949Fax: +971-4-8864950
India
Viralimalai, India Office88/1A Vadugapatti VillageViralimalai 621316 IndiaTel: +91-4339-220252Fax: +91-4339-220013
Yancheng City, ChinaMonza, Italy
Satara, India
Suzhou, China
www.craneenergy.com
30
Notes
CRANE Energy Global Headquarters
4526 Research Forest Drive, Suite 400
The Woodlands, Texas 77381 U.S.A.
Tel.: (1) 936-271-6500
Fax.: (1) 936-271-6510
CRANE Valve Services
860 Remington Boulevard
Bolingbrook, Illinois 60440
Tel.: (1) 800-272-6315
Fax.: (1) 630-226-4646
Email: [email protected]
CRANE Energy Flow Solutions®
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the Crane Co. or its subsidiaries. The Crane and Crane brands logotype (Aloyco®, Center Line®, Compac-Noz®, Crane®, Duo-Chek®, Flowseal®, Jenkins®, Krombach®, Noz-Chek®, Pacific Valves®, Stockham®, Triangle®, Uni-Chek®) are registered trademarks of Crane Co. All rights reserved.
© 2011 CRANE Energy Flow Solutions, www.craneenergy.com
EG-A
E-C
T-EN
-L11
-99-
1107
(CV
-104
)www.flowoffluids.com
www.craneenergy.com
®
NUCLEAR
