Brake Lathes - AutoZone · 2019-07-22 · Studs and Rotors on the Hub Assembly Brake Caliper Brush...

2
16 Prices Subject To Change Without Notice. Please do not return purchases to the store. For information regarding warranty, repair and any questions or concerns, please call 1-877-AZTOOL1. Combination Brake Lathe RL8500 Complete Kit- Includes Lathe, Adapters and Bench SKU 901827 5,359 99 RANRL8500 Provides a FASTER More ACCURATE and EASIER Resurfacing Capability Than Any Other Brake Lathe in It’s Class. Infinitely Variable Speed Controller Able to Turn Rotors and Drums Faster Providing One-Cut, Micro-Finish Execution Every Time • Maximum Rotor Diameter: 17” • Maximum Rotor Thickness: 2-1/2” Brake Drum Diameter: 6”-28” • Maximum Load w/ Standard Arbor: 150 Lbs Maximum Load w/ Truck Arbor: 150 Lbs Truck Adapter Kit for RL8500 Brake Lathe SKU 899411 1 , 504 99 RAN5150161 Super-Duty Truck Tooling Package Consists of an Upgraded 1-7/8” Arbor and a Wide Variety of Adapters 36 Piece Set Allows Expanded Coverage to Handle Any Vehicle Through 1-Ton Trucks Brake Lathes Brake Service Tools 8 Piece Brake Tool Set SKU 900827 49 99 27194 • Set Includes: Spring Compressor, Brake Spring Installer, Spring Removal Tool, Brake Retaining Spring Tool, Brake Spring Pliers, Two Brake Adjustment Spoons and Mini Adjustment Spoon 2 Piece Hose Pinchers SKU 191675 7 99 25250 A Quick, Easy Way to Pinch off Vacuum Lines, Fuel Lines, Etc. Without Damaging the Line Brake Cylinder Retainer Remover SKU 265111 12 99 25268 Use on GM X and J Body Cars Expands and Holds Special Retainer So the Brake Cylinder May be Removed Lift Gate Service SKU 262533 RANLIFTGATE 135 00 BL8993 Multi Speed Combo Brake Lathe Shop SKU 289884 BOSF00E900233 8 , 699 99 201 Combination Brake Lathe, Single-Speed SKU 290004 HOF201TRUECUT 5 , 799 99 Lift Gate Service SKU 290017 HOFLIFTGATE 95 00 Lift Gate Service SKU 298692 BOSLIFTGATE 50 00 Brake Shop Includes: Lathe, Bench, Adapter Set, Disc Accessory Kit, and Micrometers World Class Lathe Designed with Infinitely Adjustable Rotor Feed Speeds and Simple Selection of Arbor Speeds for Extreme Versatility! Its Positive Rake Tooling Yields 'One Pass' Finish Cut Every Time on Drums, Flywheels and All Rotors Including Cross Drilled and Slotted • Drive Motor: 1/2 HP (1,725 RPM) • Arbor Speeds: 185 - 195 (RPM) • Arbor Diameter (Standard): 1" • Maximum Arbor Weight (Standard): 150 Lbs • Rotor/Flywheel/Drum Feed Rate Per Revolution: 0.0025" • Rotor/Flywheel Diameter Range: 5" - 18" • Rotor/Flywheel Facing Travel: 4" • Rotor Thickness Range: 3" • Drum Diameter Range: 5" - 14" • Drum Facing Travel: 4" • Power Requirements: 120V, 1Ph, 60HZ • Includes Standard Adapters for Cars and Light Trucks Shown with Optional Equipment. Bench and Board Sold Separately. One Man Brake Bleeding SKU 070116 34 99 25136 STORE STOCK • Liquid Siphoning Brake Bleeding Kit SKU 604208 184 99 MITMV6830 Compressed Air Operation • 1.9 Quart Capacity Swivel Air Inlet with Quick Disconnect Clamp On Auto Refill Kit SKU 972280 59 99 MITMVA6832 40oz (1.2 L) Reservoir Holds Enough Fluid for an Entire Flush Fluid Level Control Maintains Correct Level of Fluid in the Master Cylinder Conveniently Adapts for Use with Standard 12 oz (355 ml) and 32oz. (946 ml) Brake Fluid Bottles Brake Drum and Rotor Puller SKU 291472 99 99 6980 One Person Can Easily Set the Tool in Place Spread to 12-3/4" and 5" of Reach 7-Tons of Force Can Be Used with Air Tools Wheel Hub Resurfacing Kit SKU 900812 29 99 25742 Attacks the Rust on Lug Studs and Rotors on the Hub Assembly Brake Caliper Brush SKU 250125 5 99 25435 STORE STOCK A Wire Brush with a Slim Design for Cleaning Brake Calipers and Other Brake Hardware 8 Piece Manual Brake Gauge Set SKU 191672 19 99 25266 Color Coded Brake Gauge Identifies Thickness Levels for Brake Lining Inspection 4 Piece Impact Bit Set SKU 298372 4 99 IMB4 Includes Sizes: Phillips #2, #3 and Slotted 5/16”, 3/8” CR-V Steel Hardened and Tempered Brake Pad Gauge SKU 112479 20 99 6596 • Unique Design Allows for Measurement on the Vehicle Without the Removal of Any Components in Most Cases (Wheel Assembly or Brake Caliper) • Quick Reference of Brake Pad Condition Via Color Code Scale Shown with Optional Equipment. Accessories Not Included. Brake Bleeding Tools Free Delivery! in 48 Continental United States Leasing Terms Available. Ask Your AutoZone ® Commercial Sales Manager. Spring Brake Tool for GM SKU 222526 34 99 LIS50600 Releases Tension on Both Large and Small GM Single Spring Brakes During Servicing Setup & Training Provided by Factory Representative Positive Rake Bits (10 Pack) SKU 300786 59 99 SHA408-10 Carbide Inserts (10 Pack) SKU 262383 59 99 SHA06010 Carbide Inserts (10 Pack) SKU 262383 59 99 SHA06010 5 Piece Impact Driver Set SKU 529289 9 99 IMD5 STORE STOCK Impact Driver with 3/8” Drive Output Size Reversible to Firmly Tighten or Loosen Screws or Nuts Positive Rake Carbide Bits for Hofmann SKU 290011 69 99 HOF9048800 Tool Board for 201 Brake Lathe SKU 290006 179 99 HOFB203 Work Bench for 201 Brake Lathe SKU 290008 429 99 HOFB206 Replacement Stone Sets SKU 141539 5 99 2532F 2 Fine Grit (#400) SKU 531798 5 99 2532M 2 Medium Grit (#220) Hones and Stones Brake Cylinder Hone 3/4to 2-1/2SKU 047928 18 99 25028 STORE STOCK Range: 3/4” to 2-1/2” (19 mm to 64mm) SKU 141534 5 99 2528F Fine Grit (#400) Replacement Stone Set SKU 046789 5 99 2528M STORE STOCK 2 Medium Grit (#220) Adjustable Brake Cylinder Hone SKU 531780 11 99 25032 • Range:1/2” to 2-1/4” (13 mm to 57mm) Flex-Hone Kit SKU 341378 79 99 BRMBCKD • For Compact, Medium and Large Cars BC Kit D (18mm, 20 mm 22mm, 25 mm and 29mm) NEW Rotor Flex-Hone 49 99 • Lowers Harmonic Vibrations Ideal for New and Re-turned Rotors and Flywheel Fine SKU 341310 BRMRMFH240Z25 Medium SKU 341298 BRMRMFH120Z25 Coarse SKU 341314 BRMRMFH60Z25 1-877-AZTool1 (1-877-298-6651) Hablamos Español

Transcript of Brake Lathes - AutoZone · 2019-07-22 · Studs and Rotors on the Hub Assembly Brake Caliper Brush...

Page 1: Brake Lathes - AutoZone · 2019-07-22 · Studs and Rotors on the Hub Assembly Brake Caliper Brush SKU 250125 599 25435 STORE STOCK • A Wire Brush with a Slim Design for Cleaning

16 Prices Subject To Change Without Notice. Please do not return purchases to the store. For information regarding warranty, repair and any questions or concerns, please call 1-877-AZTOOL1.

BRAKE SERVICEBRAKE SERVICEBRAKE SERVICE

16

Combination Brake Lathe RL8500Complete Kit- Includes Lathe, Adapters and BenchSKU 901827 5,35999RANRL8500Provides a FASTER More ACCURATE and EASIER Resurfacing Capability Than Any Other Brake Lathe in It’s Class.• Infinitely Variable Speed Controller

Able to Turn Rotors and Drums Faster Providing One-Cut, Micro-Finish Execution Every Time

• Maximum Rotor Diameter: 17”• Maximum Rotor Thickness: 2-1/2”• Brake Drum Diameter: 6”-28”• Maximum Load w/ Standard Arbor: 150 Lbs• Maximum Load w/ Truck Arbor: 150 Lbs

Truck Adapter Kit for RL8500 Brake LatheSKU 899411 1,50499RAN5150161• Super-Duty Truck Tooling Package Consists of

an Upgraded 1-7/8” Arbor and a Wide Variety of Adapters

• 36 Piece Set Allows Expanded Coverage to Handle Any Vehicle Through 1-Ton Trucks

Brake Lathes

Brake Service Tools

8 Piece Brake Tool SetSKU 900827 499927194• Set Includes: Spring Compressor, Brake Spring

Installer, Spring Removal Tool, Brake Retaining Spring Tool, Brake Spring Pliers, Two Brake Adjustment Spoons and Mini Adjustment Spoon

2 Piece Hose PinchersSKU 191675 79925250• A Quick, Easy Way to Pinch off Vacuum Lines,

Fuel Lines, Etc. Without Damaging the Line

Brake Cylinder Retainer RemoverSKU 265111 129925268• Use on GM X and J Body Cars• Expands and Holds Special Retainer So the

Brake Cylinder May be Removed

Lift Gate ServiceSKU 262533 RANLIFTGATE 13500

BL8993 Multi Speed Combo Brake Lathe ShopSKU 289884BOSF00E900233

8,69999

201 Combination Brake Lathe, Single-SpeedSKU 290004HOF201TRUECUT

5,79999

Lift Gate ServiceSKU 290017 HOFLIFTGATE 9500

Lift Gate ServiceSKU 298692 BOSLIFTGATE 5000

• Brake Shop Includes: Lathe, Bench, Adapter Set, Disc Accessory Kit, and Micrometers

• World Class Lathe Designed with Infinitely Adjustable Rotor Feed Speeds and Simple Selection of Arbor Speeds for Extreme Versatility! Its Positive Rake Tooling Yields 'One Pass' Finish Cut Every Time on Drums, Flywheels and All Rotors Including Cross Drilled and Slotted

• Drive Motor: 1/2 HP (1,725 RPM)

• Arbor Speeds: 185 - 195 (RPM)• Arbor Diameter (Standard): 1"• Maximum Arbor Weight

(Standard): 150 Lbs• Rotor/Flywheel/Drum Feed

Rate Per Revolution: 0.0025"• Rotor/Flywheel Diameter

Range: 5" - 18"• Rotor/Flywheel Facing Travel: 4"• Rotor Thickness Range: 3"• Drum Diameter Range: 5" - 14"• Drum Facing Travel: 4"• Power Requirements: 120V, 1Ph, 60HZ• Includes Standard Adapters for Cars

and Light Trucks Shown with Optional Equipment. Bench and Board Sold Separately.

One Man Brake BleedingSKU 070116 349925136

STORE STOCK• Liquid Siphoning

Brake Bleeding KitSKU 604208 18499MITMV6830• Compressed Air Operation• 1.9 Quart Capacity• Swivel Air Inlet with Quick Disconnect

Clamp On Auto Refill KitSKU 972280 5999MITMVA6832• 40oz (1.2 L) Reservoir Holds Enough Fluid for an Entire Flush• Fluid Level Control Maintains Correct Level of Fluid in the

Master Cylinder• Conveniently Adapts for Use with Standard 12 oz (355 ml) and

32oz. (946 ml) Brake Fluid Bottles

Brake Drum and Rotor PullerSKU 291472 99996980• One Person Can Easily Set the Tool in Place• Spread to 12-3/4" and 5" of Reach• 7-Tons of Force• Can Be Used with Air Tools

Wheel Hub Resurfacing KitSKU 900812 299925742• Attacks the Rust on Lug

Studs and Rotors on the Hub Assembly

Brake Caliper Brush SKU 250125 59925435STORE STOCK• A Wire Brush with a Slim Design for Cleaning

Brake Calipers and Other Brake Hardware

8 Piece Manual Brake Gauge SetSKU 191672 199925266• Color Coded Brake Gauge

Identifies Thickness Levels for Brake Lining Inspection

4 Piece Impact Bit SetSKU 298372499IMB4 • Includes Sizes: Phillips #2, #3 and

Slotted 5/16”, 3/8”• CR-V Steel Hardened and Tempered

Brake Pad GaugeSKU 112479 20996596• Unique Design Allows for Measurement on the Vehicle Without the Removal

of Any Components in Most Cases (Wheel Assembly or Brake Caliper)• Quick Reference of Brake Pad Condition Via Color Code Scale

Shown with Optional Equipment. Accessories Not Included.

Brake Bleeding Tools

Free Delivery!in 48 Continental United States

Leasing Terms Available. Ask Your AutoZone® Commercial Sales Manager.

Spring Brake Tool for GMSKU 222526 3499LIS50600• Releases Tension on Both Large

and Small GM Single Spring Brakes During Servicing

Setup & Training Provided by Factory Representative

Positive Rake Bits (10 Pack)SKU 300786 5999SHA408-10

Carbide Inserts (10 Pack)SKU 2623835999SHA06010

Carbide Inserts (10 Pack)SKU 2623835999SHA06010

5 Piece Impact Driver SetSKU 529289999IMD5

STORE STOCK• Impact Driver with 3/8”

Drive Output Size• Reversible to Firmly Tighten

or Loosen Screws or Nuts

Positive Rake Carbide Bits for HofmannSKU 290011 6999HOF9048800

Tool Board for 201 Brake LatheSKU 290006 17999HOFB203

Work Bench for 201 Brake LatheSKU 290008 42999HOFB206

Replacement Stone SetsSKU 141539 599 2532F• 2 Fine Grit (#400)

SKU 531798 599 2532M• 2 Medium Grit (#220)

Hones and Stones

Brake Cylinder Hone 3/4” to 2-1/2”SKU 047928 1899 25028STORE STOCK• Range: 3/4” to 2-1/2” (19 mm to 64mm)

SKU 141534 599 2528F• Fine Grit (#400)

Replacement Stone SetSKU 046789 5992528MSTORE STOCK• 2 Medium Grit (#220)

Adjustable Brake Cylinder HoneSKU 531780 1199 25032• Range:1/2” to 2-1/4”

(13 mm to 57mm)

Flex-Hone Kit SKU 341378 7999BRMBCKD• For Compact, Medium and

Large Cars • BC Kit D (18mm, 20 mm

22mm, 25 mm and 29mm)

NEW

Rotor Flex-Hone

4999

• Lowers Harmonic Vibrations • Ideal for New and Re-turned

Rotors and Flywheel

Fine SKU 341310 BRMRMFH240Z25

Medium SKU 341298 BRMRMFH120Z25

Coarse SKU 341314 BRMRMFH60Z25

1-877-AZTool1 (1-877-298-6651) Hablamos Español

Page 2: Brake Lathes - AutoZone · 2019-07-22 · Studs and Rotors on the Hub Assembly Brake Caliper Brush SKU 250125 599 25435 STORE STOCK • A Wire Brush with a Slim Design for Cleaning

17Prices Subject To Change Without Notice.Please do not return purchases to the store. For information regarding warranty, repair and any questions or concerns, please call 1-877-AZTOOL1.

1-877-AZTool1 (1-877-298-6651) Hablamos Español

Free Delivery!in 48 Continental United States

Leasing Terms Available. Ask Your AutoZone® Commercial Sales Manager.

Brake Fluid Tester SKU 191687 299925267• Easily Check Moisture Content in Any Brake Fluid• Small Size and Easy to Use Compared to Single Use Strips

BONUS BENCH & KIT "E" with Purchase of

AMM904000B

A Value of $2,264

Brake Lathes

Model 4000B Brake LatheSKU 534380AMM904000B

7,72999

• Twin Cutter Tools and Quick Drum-to-Rotor Changeover• Adjustable Spindle Speeds Allow for Quick Rough Cut/

Finish Cut Settings• Infinitely Adjustable Spindle-Feed Gear Box• User-Friendly Ergonomics• Supports Drums or Rotors Up to

100 Lbs Using the 1” Arbor, or Up to 200 Lbs Using Optional 1-7/8” Arbor

Model 4000SP Single Pass Brake LatheSKU 210247AMM904000SP

6,99999 • Integrates Single Speed Spindle and Feed Rates for

One Pass Precision Finishes• Cut Rotors in One Pass, with a High-Quality Finish• Positive Rake Tool. Bits Allow for Precision Turning

That Produces Superior Machined Surfaces• Twin Cutter Dials and Depth

of Cut are Clearly Marked Ammco Adapter Kits MUST be Purchased with Each

Ammco Brake LatheShown w/ adaptor kit not included

BONUS BENCH & KIT "B" with Purchase of AMM904000SP

A Value of $1,674

1-3/4” Silencer Band SKU 262390 2499SHA80B

Rotor Silencer Bands

Ask Your

Lift Gate ServiceSKU 262529 AMMLIFTGATE 5500

Lift Gate ServiceSKU 262529 AMMLIFTGATE 5500

2-3/4” Large Truck Silencer Band SKU 262391 4999SHAA5290

Model 6920 VentilatedSKU 262392 2499SHA69

Model 6921 Non-Vented - 6.50”SKU 262393 999SHA96

Silencer Clamp 3999 SKU 388821 SHA70B

Model 6922 Non-Vented - 9.25”SKU 262396 999SHA94

Model 6930 Heavy Duty VentilatedSKU 262397 3999 SHA930

INCLUDES Manufacturer’s

Set-Up and Training

Dual Piston PressSKU 900811 299925741• Used to Press in Dual Brake and Single Pistons

Speedy Pad SpreaderSKU 291417 4299LIS24300• Compresses Disc Brake Pistons in Seconds• Makes Brake Pad Replacement Easier

Dual Speedy Pad SpreaderSKU 291420 4999LIS25750• Compresses Dual Brake Pistons Simultaneously• Tool Compresses the Dual Brake Pistons Simultaneously• Makes Dual Piston Pad Replacement a Simple Job

Disc Brake Tools

11 Piece Disc Brake Caliper SetSKU 298604 600027111STORE STOCK• Assists in the Replacement of Brake

Pads on Most 4 Wheel Disc Brake Cars

Quick Quad Pad SpreaderSKU 080553 7999LIS29100• A Quick Way to Spread Brake Pads and Compress

Disc Brake Pistons for Pad Replacement on Single, Double & Quad Piston Calipers

• Simultaneously Compress all Four Pistons on Quad Piston Applications• Can Be Used While Caliper is on the Vehicle or Hanging Free

Free Delivery!in 48 Continental United States

Leasing Terms Available. Ask Your AutoZone® Commercial Sales Manager.

Brake Lathe Adapter Kits

Kit B

1,04999SKU 496629AMM900002• Hub and Hub Less Adapters

for Vehicles Through 1/2-Ton

Carbide Lathe InsertsSKU PART# DESCRIPTION APPLICATION PRICE

300786 SHA408-10 Positive Rake (10 Pack)

FMC/Ranger 5999

262387 SHA1042 Positive Rake (2 Pack)• Model 3850

Ammco 1499

262385 SHA0626 Negative Rake (6 Pack)• Models 3860, 4000,

4100 and 7000

Ammco 1499

262386 SHA06210 Negative Rake (10 Pack)

Ammco 1999

262389 SHA06810 Positive Rake (10 Pack)• Model BL500 and 501

Hunter 2999

262388 SHA1046 Carbide Inserts (6 Pack)

Ammco 3499

262382 SHA40710 Carbide Inserts (10 Pack)

FMC 4999

262409 SHA80210 Carbide Inserts (10 Pack)

Kwik Way 5499

262383 SHA06010 Carbide Inserts (10 Pack)

Accuturn 5999

18 Piece Disc Brake Caliper SetSKU 094798 749927113• Caliper Adapters from 1-3/16”

to 2-1/2” Some Specifically to Service Nissan, SAAB & Honda Models

• Caliper Rotation Tool with Left Hand Threads

Sprayers

Red Powder Coated Aluminum SprayerSKU 186463 MSMB8000PL

3999• 16 oz Capacity• Not for Use with

Chlorinated Solvents

Red Powder Coated Steel Sprayer SKU 186459 6399MSMA1000R• 32 oz Capacity• Not for Use with

Water-Based Products

Filler Cap Assembly SKU 186466 MSMP156

1299• Hand

Removable• For Model ”A” Sprayers

Complete Repair Kit for B8000PLSKU 186467MSMBK50

1499

Spot SprayerSKU 333347 349919419• 80-150 PSI Operating

Pressure• Refillable Metal Construction• ECO Friendly• Eliminates Harmful Propellants• 32 oz Capacity

Complete Repair Kit for Model ”A” Sprayers SKU 186465 2499MSMK10

DID YOU KNOW?We Carry Full Lines of the Best Known Brands of Shop Equipment, all Backed by Industry Experts That Can Help You Select the Best for Your Shop.

» Plated Brass Sprayer SKU 186461 MSMA2000

9999• 32 oz

Capacity

Negative Rake (10 Pack)SKU 262386SHA06210

1999

Negative Rake (10 Pack)SKU 262386SHA06210

1999

Ammco Adapter Kits MUST be Purchased with Each

Ammco Brake LatheShown w/ adaptor kit not included

INCLUDES Manufacturer’s

Set-Up and Training

While Supplies Last

Kit E

1,64999SKU 496630AMM900006 • Hub and Hubless Adapters for

Most Vehicles Through 1-Ton• Includes Double Chuck Kit

and Tacoma Plate for Hubless Applications

Brake Lathe Bench

Bench Kit

62999SKU 212739AMM902500 • For All Ammco

Lathes, Includes Sign & Toolboard - Funnel & Bucket

1-877-AZTool1 (1-877-298-6651) Hablamos Español

Brake Fluid Tester

Drum Silencer Bands