box polyform 3
-
Upload
icksserius -
Category
Documents
-
view
216 -
download
0
Transcript of box polyform 3
7/26/2019 box polyform 3
http://slidepdf.com/reader/full/box-polyform-3 1/3
Pentagonal BoxOrigami Gift Boxesby Tomoko Fuse
http://www.owt.com/gdscott
Lid
rotate
4. 5. 6.
fold corner in and lift center flap.
fold in half. fold over.
1.
turn over
2. 3.
fold to center. fold to center crease.
turn over
fold down.to eliminate additional fabricthickness, cut as indicated.tuck into front flap.
10.
pleat fold to form corner.
finished unit.
make 5
7.
fold as indicated.
8.
fold edge over tomatching dot.
9.
open.
7'' squares
cut
7/26/2019 box polyform 3
http://slidepdf.com/reader/full/box-polyform-3 2/3
Assemble
Box
tuck points underadjacent unit.
1.
2. 3.
fold up. fold over. make a crease in top layer only.
fold top layer down to marking crease.
4.
fold edge up to the top fold.
5.
open.
6.
7/26/2019 box polyform 3
http://slidepdf.com/reader/full/box-polyform-3 3/3
3
finished unit
make 5
7. 8. 9.
10.
AssembleAssemble in the same manner as shown on page 2.
Adjust the width of the box by adjusting the spacebetween the fold and the center. This will alsoheighten the sides.
xfold corners in as shown. fold down.
to eliminate additional fabricthickness, cut as indicated.tuck into front flap.
fold as indicated. fold edge over tomatching dot.
open.
12. 13.11.
14.
pleat fold to form corner.
cut