Bouscher Knives
2
My knives are constructed using 1095 carbon tool steel and heat treated and triple tempered. All blades are Rockwell tested and fall into the range of 60 plus or minus ½ Rockwell on the C scale. The blades are then hand ground and polished. They are then coated with oven cured cerakote. The knife handle is Dymondwood and can be had in walnut, cocobolo, oak or with customer supplied material and is assembled using marine-tex epoxy. The sheath is assembled using premium vegetable tanned cowhide shoulder material and treated in heated needs foot oil with a stone pocket equipped with an Arkansas stone. A random sample blade was chosen and a coupon was removed mid blade toward the cung edge, and an analysis was performed by a meturalogical laboratory. The hardness was tested with a Wilson Rockwell tester at 59.7 on the C scale. A spectrograph study using an inverted metallographic microscope at 200x and 500x shows a consistent 95% or beer martensite transformaon. See images. 200x 95% tempered martensite with Rolling Banding Sharp Image 500x 95% tempered martensite with Islands Sharp Image WV Bouschor Knives P.O. Box 31 • Curs, WA 98538 • 360-736-2737 (See sample knives on reverse side)
-
Upload
jacksonholland8335 -
Category
Documents
-
view
178 -
download
5
Transcript of Bouscher Knives
My knives are constructed using 1095 carbon tool steel and heat treated and triple
tempered. All blades are Rockwell tested and fall into the range of 60 plus or
minus ½ Rockwell on the C scale. The blades are then hand ground and polished.
They are then coated with oven cured cerakote.
The knife handle is Dymondwood and can be had in walnut, cocobolo, oak or with
customer supplied material and is assembled using marine-tex epoxy.
The sheath is assembled using premium vegetable tanned cowhide shoulder
material and treated in heated needs foot oil with a stone pocket equipped with an
Arkansas stone.
A random sample blade was chosen and a coupon was removed mid blade toward
the cutting edge, and an analysis was performed by a meturalogical laboratory.
The hardness was tested with a Wilson Rockwell tester at 59.7 on the C scale. A
spectrograph study using an inverted metallographic microscope at 200x and 500x
shows a consistent 95% or better martensite transformation. See images.
200x 95% tempered martensitewith Rolling Banding Sharp Image
500x 95% tempered martensitewith Islands Sharp Image
WV Bouschor KnivesP.O. Box 31 • Curtis, WA 98538 • 360-736-2737
(See sample knives on reverse side)
Knife SamplesGold Nugget Presentation
Standard HunterStabilized Koa Wood
Standard HunterStabilized Koa Wood
Clip Point HunterLaminated Walnut
StandardSheath
