BOTTLING & LABELING
Transcript of BOTTLING & LABELING
THE BESTIN BOTTLING EQUIPMENT
East 905.357.2930 | West 707.431.2211
[email protected] | [email protected]
LABELBOTTLEFILTERFERMENTCIDER
PROCESSING, BOTTLING, LABELING AND MORE FOR THE BREWING INDUSTRY
http://www.criveller.com
BOTTLING &LABELING
Quote# 846
May 4, 2020
2277 Napa Vallejo HwyNapa, California, 94558
Dear Eresa ,
Thank you very much for giving me and The Criveller Group the opportunity to earn your business. Attached is the proposal for
the bottling line that you requested. Also as requested, we have supplied some options that were based on your request. We look
forward to the time that we may present our proposal to you in person (or video) and show you some examples of how our
equipment is superior to our competition.
At Criveller, we employ more technicians per piece of equipment, than our competition, which allows for faster response times
should a issue arise. I ask that you take the above into consideration when comparing Criveller to other suppliers. Making sure
you and your team are up and running is as important to me as selling the equipment.
Thank you and look forward to working with you
Sincerely,
Jimmy Clement
Criveller California
185 Grant Ave
Healdsburg, California, 95448
Page 1
Quote # 846 Jimmy Clement May 4, 2020
MODEL: TRIBLOC 9/9/1 WITH CORKER AND OPTIONAL REVOLVING TURRET
This filler has been designed specifically for still wines.
• Model: 9-9-1
• Product: Flat
• Output: 1,500 BPH
• Bottles: Glass type
• Filling Temperature: 0/+2°C
MAIN CONSTRUCTION CHARACTERISTICS:
• Sturdy stainless steel frame
• Stainless steel AISI 304 clad base platform.
• Stainless steel AISI 304 panels, with bolt closing system
• Frame placed on adjustable feet which have a base made of high resistant plastic material.
• The rotary components of the machine such as carrousels, star-wheels etc. are equipped with ball-clutches that intervenein case of excessive rotary efforts due to eventual bottles jamming in the star-wheels or in case of mechanical breakages.These clutches are then equipped with special sensors suitable to completely stop the machine.
• Pneumatic valve for product inlet.
• Product feeding tube in stainless steel with TRC fitting
• Electrical motor controlled by INVERTER
• Stainless steel electric board with low-voltage controls, placed at machine side, complete with PLC and all the necessaryelectrical components
• Manual lubrication
• Complete stainless steel bottles conveyor
• Inlet and exit placed on two opposite sides of the machine.
• Inlet and outlet photocells
• Unit provided with parts to work with one bottle format
• Star wheels supports made in stainless steel AISI 304; star-wheels, guides and sliders for bottles support made inpolypropylene.
• The original equipment (star-wheels, conveyors and infeed scroll) supplied with the machine can be easily replaced withother ones suitable for different bottles diameters or with other shapes.
• Complete safety guards according to CE norms, made in stainless steel AISI 304 frame, integrated into the machinestructure, and transparent plexiglass panels
• One single motor for the control of the whole machine with motion transmission through balanced cardan shafts.
• Gears for motion transmission to star-wheels, in-feed scroll realized alternatively in steel and high resistant plasticmaterial (Nylon 6)This solution minimize wear and tear and reduces machine noise
• Safety devices on the whole machine conforming to CE norms
• The machine will slot into an existing production line without having to make major alteration and adjustments to anyother in line equipment
Page 2
Quote # 846 Jimmy Clement May 4, 2020
GRAVITY TRIBLOC
SINGLE-STAGE RINSER:
This Rinser has been designed specifically for flat products such as: water, wine and, etc.
• Rinser suitable for internal rinsing of non-return glass bottles 0.75 L. (cylindrical)
• This is an external cam style of rinser (not gear revolving style)
• Clamps (grippers) are guided and controlled by an external cam. Grippers run on the cam with a plastic device thatminimize wear and tear and is noiseless
• The mechanical parts in touch with the bottle or with the rinsing liquid, such as the grip, the valve, the nozzle, are built instainless steel AISI 316.
• Some parts are made in plastic material or rubber; these materials are certified for food uses.
• Specially shaped rubber grippers assure that the bottle is hold firmly in place
• Rinser turret can be adjusted in height to accommodate different bottle height. This operation is made easy by theelectrical motor that lifts/lower the entire turret when in need
• No bottle – no spray: should a bottle be not present; the unit will not inject water thus eliminating the problem of wettingthe exterior of other bottles
• Electro-valve placed at the beginning of the injection system controls the inlet flow of the rinsing liquid.
• The treatment time is proportional to the machine speed and can be adjusted
GRAVITY FILLER WITH 9 FILLING VALVES
• Suitable for gravity or low vacuum filling into 0,75 lt. glass bottles.
• Tank, filling valves, pipes, instrumentation and all parts in touch with the filling products are built in stainless steel AISI304.
• Manual height adjustment of filling carousel.
• Product tank (bowl) complete with stainless steel butterfly valve with pneumatic operating for product flow adjustmentand controlled by minimum/maximum level probes or floater.
• The bottom of the tank (bowl) has a conical shape to facilitate the emptying of the tank and to avoid that any liquidsremains inside the bowl.
• Product feeling through AISI 304 stainless steel pipes and a rotary distributor; sections and geometry of pipes arerealized in such a way to have a constant speed and product stability.
• The filling valves are built to avoid any product leakage; they can be easily disassembled and they are equipped withspecial devices for cleaning and sterilization operations.
• Filling level adjustment by means of special washers on the filling nozzles.
• Gaskets and plastic parts touching the product are made with food grade materials
• When operating as a low-vacuum filler, the low vacuum is provided by a blower that is positioned underneath the machinebase
• Unit is designed to facilitate maintenance procedures. The components of the unit such as the filler turret, the corker/capper turret etc. Allows the operator to easily reach all the components.
Page 3
Quote # 846 Jimmy Clement May 4, 2020
Operation description:
• The bottles arriving from the rinsing turret are spaced out at machine pitch by a scroll and enter the star-wheel incorrespondence of the bottles lifting cylinders.
• Pneumatic cylinders, through compressed air, lift bottles positioning them under filling valves.
• A special sensor detects bottle presence and sends a signal of “cycle beginning” to the PLC, that, according to the pre-selected program, let the machine start the operations.
• Machine complete with air pump able to make the following operations:◦ Air aspiration into the bottle
◦ Clean gas injection to saturate bottle
◦ Eventual double-pre-evacuation
◦ Filling
◦ Final levelling with inert gas injection
• At the end of the filling phase, pneumatic piston, controlled by a cam, is lowered and places the bottle into the unloadingstar-wheel.
1-HEAD CORKING TURRET FOR APPLYING NATURAL CORKS
• Suitable to n.01 size of natural cork
• Manual mechanic device for capping-head height adjustment in order to allow extra container sizes handling.
• Large cork hopper with tumbler mechanism and feeder
• Compressing jaws for natural cork
• Jaws in hardened, round and polished stainless steel to ensure maximum life and efficiency. The jaws compression iscontrolled by a hardened steel rotary cam, specially designed to allow slow cork compression, keeping molecularstructures intact and quick insertion into the bottle neck; the minimum compression cylinder is set to a Ø 16mm.
• Chute, made of AISI 304 stainless steel .
• Stainless steel cork plunger
• All of the supports and shafts on the machine base that may come into contact with the product are made of AISI 304stainless steel.
• Vacuum, pressure gauge and all piping are included
OPTIONAL: 1-HEAD REVOLVING TURRET WITH CORKING AND SCREW CAPPING IN LUE OF SINGLE HEAD CORKER
Constructed in steel and equipped with safety devices and is suitable for inserting cork to neck level in glass bottles andAluminum caps (SCREW CAPS). The turret is revolving and allows the operator to either work with the “corking” side or the“capping” side of the turret.
• The corks travel through a descending pipe to the compression group which is made up of four steel dowels.
• The dowels press down the cap, which is inserted into the bottle opening by the appropriate sealing cover, whilst thebottle is lifted by the lifting cylinder and placed in the center of one of the star sections.
• A blowing device is installed on the dowel compression group for the immediate elimination of any dust.
• Corker includes vacuum
• Cork distribution and the closing end are excluded when there are no bottles.
• The exclusive use of anti-oxidation steel externally, rounded edges, lack of bolts and other bumps ensure easy cleaningand a possibility of total hygiene.
• When working with the screw capping head, the caps is guided by means of a descending chute (in stainless steel)
• The caps are removed from the chute automatically as the bottle is passing through
• A 4 roller head applies the proper pressure thus obtaining the threading as well as the sealing of the cap.
• Gas injection prior to capping
Page 4
Quote # 846 Jimmy Clement May 4, 2020
TECHNICAL CHARACTERISTICS:
• Output: 1500 bph with 750ml bottles
• Voltage: 220V/3 Phase/ 60 hz
• Min/Max bottle diameters: 55-105mm
• Min/Max bottle heights: 220-360mm
• Filling tube diameter: 15mm
• Cap type: Cork
• Cork diameters: 22-30mm
• Cork Height: 28-45mm
Page 5
Quote # 846 Jimmy Clement May 4, 2020
MODEL: S1L
Unit complete with one or two label dispensing stations (Second station optional). If you have a roll with front and back labels insequence, the machine is able to apply both front and back labels off the same roll or off of two separate rolls.
MAIN CONSTRUCTION CHARACTERISTICS:
• Option of installing a second back label station from separate roll.
• Stainless steel and aluminium body
• DC step motor with control board and microprocessor
• Safety guard included
• With capsule distributor
• Complete with spinner on column
TECHNICAL CHARACTERISTICS:
• Stations adjustable in height from the bottom of the bottle:
• Min. 10 mm – Max. 45 mm
• Maximum paper passage 14 cm
• Maximum label roll size: 270mm (10.5”)
• Power supply: 220 volt / 3 phase / 60 Hz.
• Power drawn: 1 kW
• Error tolerance in the label application: +/- 2.0 mm (with cylindrical containers)
• Safety guard included
Page 6
Quote # 846 Jimmy Clement May 4, 2020
S1L
PRICING SUMMARY
ITEM DETAIL UNIT PRICE Qty PRICE
Tri Bloc 9/9/1 (1 x Bordeaux changeparts
included)
$123,894 1 $123,894
Deaeration on screwworm $6,463 1 $6,463
Revolving Turret (Corker - Screwcapper) $22,819 1 $22,819
Nitrogen Injection on Corker $1,847 1 $1,847
Nitrogen Injection on Screw Capper $2,981 1 $2,981
Thermometer in Bowl $396 1 $396
Mobile Nozzles $4,353 1 $4,353
Change parts for different bottle size for
monobloc (1 x Burgundy bottle)
$3,694 1 $3,694
CIP of filling valves in countercurrent flow $6,480 0 $0
Sensor for cap detection on screw capping
chute
$1,320 1 $1,320
S1L Labeling Machine $16,041 1 $16,041
Screwworm for labeler $510 1 $510
Tapered / Conical Bottle Kit $1,426 1 $1,426
Needle separation system $1,450 1 $1,450
Capsule Distributor with tray $4,383 1 $4,383
Touchscreen $1,201 1 $1,201
Variable Frequency Drive for Machine $1,771 1 $1,771
Page 7
Quote # 846 Jimmy Clement May 4, 2020 INITIAL
EP
ITEM DETAIL UNIT PRICE Qty PRICE
Spinner $1,674 1 $1,674
Variable Frequency Drive for Spinner $901 1 $901
Small Dump Table $1,800 1 $1,800
Pack off table 2000mm $5,540 1 $5,540
Cross over station $2,970 1 $2,970
Conveyor channel (closed type) per meter $390 4 $1,560
Conveyor track $40 24 $960
Installation $8,900 1 $8,900
Subtotal $218,854
Additional Education Discount
(-10%)
-$21,885.40
Total $196,968.60
Page 8
Quote # 846 Jimmy Clement May 4, 2020
INITIALEP
• Prices are for goods F.O.B. Healdsburg, CA
• Applicable taxes EXTRA
• Applicable shipping and crating EXTRA
• If not otherwise stated equipment is made in Italy.
• Prices quoted do not include any tariffs, import duties, taxes, surcharges, port fees (or any other type of fee orcharge directly attributed to the importation of any goods /equipment into the USA that may be put into effectafter February 10th 2017. Should any of these be imposed, Criveller will pass these fees on to the customer at noadditional markup.
• This does not apply to goods/equipment already in stock at the Healdsburg location.
• Electrical plug not included
• Valves not included
• Payment: 50% with the order, balance prior to delivery
• If customer is unable to take delivery of equipment within 30 days of being advised that equipment is ready toship then complete balance is due in full. If equipment is not able to be delivered after 60 days of being advisedthat equipment is ready to ship then storage rates will apply. For full containers being shipped directly to thecustomer: final payment is due when the container has boarded the vessel
• Delivery time: To be agreed.
This quotation automatically expires in 30 days Quote No: 846
To: CRIVELLER CALIFORNIA
EIN 94-3343429
Page 9
Quote # 846 Jimmy Clement May 4, 2020
Under conditions as presently known
to us we would favorably entertain
your offer to purchase under the
terms and conditions herewith set forth.
Date: Not yet accepted
Company: Napa Valley College Estate Winery
By: Eresa Puch
CRIVELLER CALIFORNIA
By: Criveller California
We hereby offer to purchase the item(s)
described above under the general terms and
conditions specified herein.
Please use our purchase order No.............
TERMS AND CONDITIONS
SIGNATUREJennifer Johnson
SIGNATUREEresa Puch
ACCEPTED BY:
Eresa Puch, Customer’s P.O. No., Not yet
accepted
1. PRICES: Unless otherwise specified, prices quoted are subject to change without notice.
2. ORDER ACKNOWLEDGEMENT: This quotation is only a request for our offer for purchase or an actual order. All orders ARE SUBJECT TO
ACCEPTANCE at Healdsburg, California. Our written acknowledgement, which sets forth the order, as we understand it, constitutes acceptance.
Unless we hear from you promptly it is agreed that the acknowledgement will be an integration of and final, and entire agreement between us,
superseding and merging all prior communications.
3. CHANGE ORDERS: Customer must order additional work or changes in writing, and customer agrees to pay the additional cost of extra or
changed work, as determined by Criveller California Corporation.
4. CANCELLATION: In the event customer should cancel its order subsequent to accepting this proposal, and prior to the commencement of any
work by Criveller California Corp., the deposit shall be forfeited by customer and applied to purchase of special materials, parts and engineering
cost incurred for this particular job, or credited to future jobs, at the sole option of Criveller California Corp.
5. LOCAL CODES AND REGULATIONS: Equipment manufactured in countries other than USA, is generally manufactured to conform to the safety,
electrical and other standard, which apply to the country of origin. Responsibility for compliance with O.S.H.A. regulations, State, federal or local
codes shall be solely that of the purchaser. The items described in this proposal for manufacture may not meet earthquake specifications.
Consequently, customer acknowledges by signing this proposal that he waives any and all claims whatsoever against Criveller California Corp. for
damages sustained due to loss occasioned by earthquake and related damage to any of the items the subject of the proposal.
6. EQUIPMENT GUARANTIES: New equipment is guaranteed for one year from date of delivery. Warranty covers all defective components. This
warranty is limited to free replacement or repairs of parts, found to be defective within warranty. Freight charges incurred to replace or repair
shall be borne by the purchaser. The warranty DOES NOT cover electrical components unless proven to be defective at time of installation and in
any case not later than three months from time of delivery, “wear and tear items”, or components that fail as the result of or is substantially caused
by the failure of the buyer to use or properly maintain the equipment according o the manufacturer’s instructions. Accounts unpaid on equipment
supplied by Criveller California Corp. 30 days beyond term shall automatically reduce the one year warranty to a period of 120 days after delivery.
7. TERMS OF PAYMENT: As part of any purchase agreement, purchaser agrees to pay a service charge of 1- 1,5% per month for any unpaid balance
and to reimburse Criveller California for any attorney fees, court costs or other costs disbursed in order to effect the collection.
8. TIME AND PLACE OF SHIPMENTS: Unless the indicated shipping date is expressively guaranteed, advance information as to date of shipment is
an approximation only, based upon our best judgement at the time.
9. TITLE AND RISK: Irrespective of any provision concerning freight or prices, title shall remain in the name of the seller until payment in full is
received. However, risk of loss and damage shall pass on to the purchaser upon consignment of goods to any carrier from seller’s plant or other
shipping point. Criveller Company is released from any responsibility by the carrier once the goods are loaded on truck. It is strongly
recommended that crates are opened and that goods are inspected prior to signing the release. It is the responsibility of the customer/receiver to
note any damage prior to signing the release (Bill of Lading); damage must be noted on the release and signed by the driver as well as the
receiver. We may assist you in processing claims against carriers without increasing liability therefore. It is the responsibility of the customer/
receiver to unload shipped goods at arrival.
10. DELIVERY/STORAGE CHARGES: In the event that Buyer is unable to accept delivery/ or pick up goods within 30 days after Goods is received by
Seller, payment of Goods is to be made in accordance with the terms of the contract, and storage fees may be applied at the sole discretion of the
Seller
11. RESTOCKING CHARGES: Criveller Company must be notified for authorization prior to returning item(s). Unused equipment may be returned for
refund at you own expense within 30 days of receipt date. Returned merchandise is subject to a 15 % restocking charge. Merchandise that has
been used must be inspected by Criveller Company for possible damage prior to authorizing credit for the return. Repairs to merchandise will be
deducted from original selling price. All returns should be sent via prepaid courier or common carrier paid by sender.
12. FORCE MAJEURE: The seller shall not be responsible for the delay in shipment or missed delivery of the goods due to force majeure, which may
occur during the process of the manufacturing or in the course of loading or transit, such as war, fire, labor dispute, strikes, earthquake, typhoon,
natural catastrophe and all other contingencies and circumstances including lack of transportation equipment, inability to secure materials
necessary to process the items sold hereunder, whatsoever beyond the seller’s reasonable control preventing, hindering or interfering with the
performance thereof.
13. GOVERNING LAW: This agreement is to be construed in accordance with the UCC as enacted in California and other applicable laws of the State
of California. Any legal action filed between the parties shall be filed and venue shall be exclusively in Sonoma County, California. If either party
violates this section 27 by filling in another state or County, such party shall pay to the other any and all legal expenses fees and costs associated
with the transfer of such legal action to Sonoma County, California. Signature on orders received by fax will, for legal purposes, be treated as
original.
CRIVELLER CALIFORNIA CORP.
EIN 94-3343429
Page 10
Quote # 846 Jimmy Clement May 4, 2020
TERMS AND CONDITIONS
SIGNATUREJennifer Johnson
SIGNATURE
INITIALS
Complete the below form:
Page 11
Quote # 846 Jimmy Clement May 4, 2020
Sell to Client Company Name (Legal Entity):
Bill to Company Name (If different from above):
Physical Address City, State, Zip:
Billing to Address, City, State, Zip
Phone:
Accounts Payable Contact Name:
Accounts Payable Email Address:
Ship to Company Name:
Preferred Payment Method: CHECK / ACH / WIRE / CASH
Ship to Company Address:
CLIENT ACCOUNTS PAYABLE INFORMATION
CRIVELLER CALIFORNIA CORP. PAYMENT INFORMATION FOR CLIENT
ACCOUNTS RECEIVABLE:
Jeana [email protected]
Alternate Contact:Jennifer JohnsonOperations Manager707.431.2211 [email protected]
PAYMENT METHODS
CHECK PAYABLE TO:Criveller California Corp.185 Grant AveHealdsburg, CA 95448
Please include the quote number, sales order number, or invoice number in the memo portion.
Copies of checks will only be accepted for time sensitive orders if client can overnight payment with an emailed copy ofcheck and shipping receipt.
WIRE/ACH:
Bank Name: Alta Pacific BankBank Address: 3725 West Wind Blvd, Santa Rosa, CA 95403Bank Phone: 707.536.1500Bank Fax: 707.543.2703
Routing Number: 121144311Criveller Account Number: 012001677
CASH:
Brought directly to Criveller California Corp.
VISA/MASTERCARD:
*For part orders only (non-negotiable for equipment orders or deposits)
$1,500.00 payment maximum
Page 12
Quote # 846 Jimmy Clement May 4, 2020