BOSCH Specification for Chemistry and Metallurgical
-
Upload
purushothama-nanje-gowda -
Category
Documents
-
view
71 -
download
3
description
Transcript of BOSCH Specification for Chemistry and Metallurgical
Printed versions and copies of RBIN Standards documents are not subject to the Webpage update service. Up-to-dateness is not guaranteed.
Page 1 of 2 © Bosch Limited. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
2014-02-04
RBIN-Standard N28 F 002 S2K A04
Low carbon alloy steel
RBIN Series: N28 Material order specification
Technical responsibility: nai2ban DS/ETC4-IN (903)
Standardization organization: RBIN/PJM Replaces edition: 2011-11-08
Created by: murzban RBIN/PJM14 (280)
Document language: en
Original language:
Change: Carbon content changed to 0.35-0.5%. Hardness changed to 100-250 HB.
Change information:
Translation Responsibility
Release date Source language Target language Translated by Unit code BWN
RBIN-Standard | N28 F 002 S2K A04 | 2014-02-04 | 2
© Bosch Limited. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights..
Area of validity, binding force, freedom to disclose Valid for RBIN Binding for RBIN Binding due to RB/GF 131 Recommended for RBIN Disclosure Restricted in accordance with RB/GF 108
1 Scope This standard covers the requirements of low carbon alloy steel.
2 Application PE Gear segment – F 002 A11 482
3 Supply condition Metal injection moulded and sintered.
4 Supply form As per drawing.
5 Chemical properties, %
C 0.35 - 0.5 Cr 0.5 - 1.0 Ni 0.5 - 1.0 Mo max. 0.5 Fe Balance
6 Mechanical properties
Tensile strength min. 445 MPa Yield strength min. 210 MPa Elongation min. 30% Hardness 100 - 250 HB
7 Density min. 7.5 g/cc
8 Additional requirements As per order.