Bosch Solar Cell M 3BB C3 1200 Englisch
-
Upload
kirsten-hernandez -
Category
Documents
-
view
216 -
download
0
Transcript of Bosch Solar Cell M 3BB C3 1200 Englisch
7/27/2019 Bosch Solar Cell M 3BB C3 1200 Englisch
http://slidepdf.com/reader/full/bosch-solar-cell-m-3bb-c3-1200-englisch 1/2
Efcient – high-perormance – reliable.
Solar cells rom Bosch Solar Energy.
High perormance – Stable yields.Bosch Solar Cell M 3BBC3 1200
Our monochrystalline solar cells oer impressive eatures including:
High annual yields, even with sub-optimal levels o sunlight,
thanks to excellent perormance in weak light conditions
Exceptionally stable perormance thanks to using purest silicon and to
high-resistance waers, produced in-house
Improved cell processing as a result o narrow perormance tolerances
Reliability o short and long term supply, due to high production capacity
Pioneering 3-busbar technology reduces the series resistance and helps
to boost the power output in the module
Packaging:
150 pack as smallest packaging unit
Suitable or controlling/checking incoming goods digitally using a barcode system
Production & quality control:
100 % classifcation under IEC 60904 and IEC 60891
100 % testing o reverse-current
Regular calibration at Fraunhoer ISE
7/27/2019 Bosch Solar Cell M 3BB C3 1200 Englisch
http://slidepdf.com/reader/full/bosch-solar-cell-m-3bb-c3-1200-englisch 2/2
Bosch Solar Cell M 3BB | C3 1200
Product characteristics
Dimensions 156 mm x 156 mm (±0.5 mm) pseudo square
Diagonal 205 mm ±1 mm
Average thickness 190 μm (±30 µm) 210 μm (±30 µm)
Front contacts (–) 3 Busbars (silver) with 1.5 mm width,
textured surace with silicon nitride anti-relective coating
Back contacts (+) 3 rows o soldering pads (silver) with a pad width o 2.9 mm,
ull-surace aluminium BSFDark reverse current Irev < 1.5 A @ –12 V
Power sorting +50 / –0 mW
Storage conditions:
Store at room temperature,
protected rom dust and
moisture.
Recommendations or
processing:
Tin-plated copper ribbonCoating: 10-15 µm
(62 % Sn / 36 % Pb / 2 % Ag)
All dimensional data without tolerance values are nominal values.
Subject to technical modifcations in the course o product development. Errors and mistakes excepted.
Version: 10/2012
* These electrical parameters are
typical mean values rom historical
production data.
Bosch Solar Energy AG assumes no
liability or the accuracy o this data
or uture production batches.
** The tolerance value relates to a
reerence cell calibrated by the
Fraunhoer ISE in Freiburg
Weak light perormance:
Intensity
[W/m2]
Vmpp*
[%]
Impp*
[%]
1 000 0 0
900 –0.3 –10
500 –1.94 –50
300 –3.91 –70
200 –6.06 –80
The electrical data applies or
25 °C and AM 1.5(IEC 60904-3 ed.2 2008).
Class Pmpp
[Wp]
Eiciency
[%]
Vmpp*
[mV]
Impp*
[mA]
Voc*
[mV]
Isc*
[mA]
4.39 4.39 - 4.44 18.22 - 18.43 525 8 380 625 8 920
4.34 4.34 - 4.39 18.01 - 18.22 523 8 340 623 8 870
4.29 4.29 - 4.34 17.81 - 18.01 521 8 300 621 8 840
4.24 4.24 - 4.29 17.60 - 17.81 518 8 260 619 8 810
4.19 4.19 - 4.24 17.39 - 17.60 516 8 180 618 8 770
The electrical data applies or standard test conditions (STC): 1 000 W/m2, 25 °C, AM 1.5 (IEC 60904-3 ed.2 2008);
Tolerance P: ±1.5 % rel. **
Temperature coeicients: a (Isc): +0.04 %/K b (V
oc): –0.33 %/K g (P
mpp): –0.43 %/K
Electrical data:
Specifcations in mm
Rel. spectral response
Wavelength [nm]
Spectral response
0.1 0.2 0.3 0.4 0.5 0.60
2.0
4.0
6.0
10.0
Current [A] 4.34 Wp
Voltage [V]
8.0
I-V characteristic
0.0300 500 700 900 1 100 1 3000
2
4
6
16
14
12
10
8
Bosch Solar Energy AG
Robert Bosch Straße 1
99310 Arnstadt
Germany
Phone: +49 (0)3628 6644-0
Fax: +49 (0)3628 6644-1133
www.bosch-solarenergy.com