boq300resunits infras

8/2/2019 boq300resunits infras

1/12

SAUDI COMMITTEE FOR UNITED NATIONS

PALESTINIAN RELEIF DEVELOPMENT PROGRAMM

CONSTRUCTION OF 300 RESIDENTIAL

UNITS IN RAFAH

Construction of Infrastructure works

Bill of Quantity

SAUDI COMMITTEE FOR UNITED NATIONS

PALESTINIAN RELEIF DEVELOPMENT PROGRAMM

CONSTRUCTION OF 300 RESIDENTIAL

UNITS IN RAFAH


Bill of Quantity


2/12


PAL10-49740: Construction of 300 Residential Units in RafahITB 2012-099

Bill No (1)

1. Mobilization & Demobilization

in Numbers In Letters

All works according to particular specifications, and

supervisor engineer instructions.

1/1

Preparation works including:1- Supply Site office, shed, equipments, and furniture for

both supervision and contractor.

2- Access road to and through the site.

3- Transportation & Communication.for the supervisor

engineers

4- Cleaning the existing site outside the buildings, the

work includes removing all debris around buildings and

transmitting to approved dumping site.

5-Determination the Road axis ,coordinates by Total

Stationand allignment of the sewage , water and

electrical networks.

LS 1

1/2Dismantle and remove all facilities, services, furniture,shed and any equipment related to the project supervisor

and contractor office.As per the engineer instructon.

LS 1

Total

Total (US$)ITEM DESCRIPTION UNIT QTYRATE (US$)

Contractor Signature


3/12




2 Water Supply Works1- All works must be coordinated with the water department at the

Municipality &CMWU.

2- The price includes the cost of excavation to depth indicated in

drawings not less than 1m using retaining shuttering, shoring

according to instructions of Engineer, bedding of 20 cm clean

sand under around and above the pipe with compaction,

backfilling of the trench up to design level with sand in layers 25

cm thick for each with compaction 98% MDD and all required

tests.

3- The work includes removal of the surplus materials outside the

site to places as instructed by the Engineer.

4- The work includes supply and installation of metallic warning

tap, and other accessories and thrust blocks according to details.

5- The covers of manholes are made of cast iron with diameter 60

cm engraved by the word " Water " in English and Arabic. the ring

is from cast iron square shaped with 70*70 cm dimensions. the

concrete which used around the ring is B350 and should have a

Basalts layer of 2 cm above the concrete and around the cover

rings. according to drawings, specifications and Engineers

instruction.

6-Cleaning ,disinfection and testing all the installed pipes

according to technical specification, Engineers instructions and

coordinating with water department in the municipality & CMWU.

7-All works are performed according to the drawings,

specifications and Engineers instruction

8-All Manholes items to be painted with hot bituminous 70/25

paint in addition to primer coat as directed by the supervision

Engineers & the manufacture instructions.

9-The price include reinstate repairing any damage resulted from

the works, all according to specification & as per engineer

instructions

10-The contractor must be submit detailed shop drawings of the

coming items for the approval by the Engineer before starting the

work.

11-The price includs supply and lay warning tape over the pipeline

with text indicating the exiatance of Water Pipeline.

12-All gate valves should be 16 bar working pressure Hakohav,

Raphael made or equivalent13- All ball valves should be 16 bar working pressure Zagiv made

or equivalent

14- Air release valves should be 16 bar working pressure A.R.I

made or equivalent

2.1 Supply, and install 110mm diameter PVC-U water pipes PN 10including excavation, backfilling, elbows, angles, Tees, flanges,

end caps, joints and accessories .The pipe should be bedded

and covered with at les t 20 cm of clean sand around, at the top

and bottom of the pipe . The used sand for backfilling of the

trench will be in layers not exceeding 25cm, with compaction not

less than 98 % , up to the design leveling of the road all according

to the engineer's instruction, drawings and technical specifications

L.M 800

2.2 Ditto but 63 mm diameter MDPE (Polyethylene) water pipes . L.M 3500

BILL NO. 2 WATER SUPPLY WORKS

ITEM DESCRIPTION UNIT QTYRATE (US$)

Total (US$)

Contractor signature


4/12




BILL NO. 2 WATER SUPPLY WORKS


Total (US$)

Supply and install 80 cm internal diameter precast circular

reinforced concrete water manhole for air release valve,

complete with B300 cast in place reinforced concrete base,

cast iron cover (25ton Capacity) with frame. The supplied

concrete rings should be provided with cast iron steps @

30cm maximum. The work includes excavation in any type

of soil to any depth , backfilling with clean sand and

compaction 98% MDD up to the design leveling of theroads. The manhole base should be provided with

drainage opening with aggregate bed.

The price shall include Tee 110x110x50mm, ball valve 2"

diameter Sagiv or equivalent, air release valve 2" diameter

double action ARI or equivalent, Nipples, f ittings and all

needed tests to finish work according to drawing,

specification and engineer's instructions.

2.4 Ditto but Manhole 100 cm diameter for washout valve. Theprice includes supply and install gate valve 3", flanged

dresser 3", Tee 63x63x50mm , Nipples, Jack supports,

male connector for firefighting hose, fire fighting hose 2"

with length 15 m and all fittings according to drawing,

specification and engineer instructions

No. 1

2.5 Ditto but Manhole 80 cm diameter for Gate Valve 4" on thepipe 110 mm (MH1). The price includes Flanges, dressers,socket flange, gate valve 4" diameter, Jack supports, and

all fittings according to drawings, specification and

engineer's instructions

No. 1

2.6 Ditto but Manhole 80 cm diameter for Gate Valve 3" on thepipe 63 mm (MH2, MH3). The price includes Flanges,

dressers, socket flange, gate valve 3" diameter, Jack

supports and all fittings according to drawings,

specification and engineer's instructions

No. 2

2.7 Ditto but Manhole 80 cm diameter for Gate Valve 4" on thepipe 110 mm (MH4,MH5,MH6,MH7)). The price includes

Flanges, dressers, socket flange, reducer 4"/3", gate

valve 4" diameter, Jack supports, and all fittings according

to drawings, specification and engineer's instructions

No. 4

2.8 Ditto but Manhole 80 cm diameter for the fire hydrant. Theprice includes Flanges, dressers, socket flange, gate

valve 4" diameter, Jack supports,3" & 4" galvanized steel

pipes, galv. steel reducer 4"/3"galvanized elbow 3", f ire

hyrant valve 3" 16 bar and all flanges and fittings. The

galv. pipes should be painted and supprted by concrete

thrust block ,all works as specification drawings and

engineer's instruction.

No. 2

2.9 Cutting the existing 200mm UPVC pipe and connecting thenew UPVC pipe 110mm including T200X200X110mm,

Dressers, flanges and all needed fittings and accessories.

The work includes excavation and backfil ling with clean

compacted sand all as specification drawings and


No. 1

2.10 Cutting the existing 160mm UPVC pipe and connecting thenew UPVC pipe 110mm including T160X160X110mm,

Dressers, flanges and all needed fittings and accessories.

The work includes excavation and backfil ling with clean

compacted sand all as specification drawings and


No. 1

2.11 Excavation , backf illing with clean sand on layers not toexceed 25 cm each , Supply and install house connection

32". The price includes approved Saddle 110/32mm ,

thrust block ,MDPE pipe 32 mm diameter to be connected

to the existing 1" steel pipe and all needed fittings

according to drawings, specification and engineer's

instructions.

No. 20

2.12 Ditto, but saddle 63/32 mm No. 80

Total ($)

2.3 No. 2



5/12


PAL10-49740: Construction of 300 Residential Units in RafahITB2012-099

BILL NO.3

SEWAGE WORKS

Numbe In Letters

3 Sewage works

_The contractor has to submit detailed shop drawings of

the coming items for the approval by the Rafah

municipality and CMWU before starting the work.

_The Contractor has to visit the site for inspection.

_The price includes the cost of excavation to depth

indicated in drawings and using retaining shuttering,

shoring according to the instructions of Engineer,

bedding of 15 cm clean sand under ,around and above

the pipe with compaction, backfilling of the trench up to

design level in layers 25cm thick for each with

compaction 98% MDD and all required tests.

_The work includes removal of the surplus materials

outside the site to places as instructed by the Engineer.

_The work includes connection of the manholes to the

existing sewage line after cleaning and adjusting the

level and orientation of the existing pipes if needed

according to engineer instructions.

_ The holes of the manholes have to be done using

core machine.

_ All the manholes have to be coated by one coat

primer and external hot bitumen coating 75/25.

_ Measurement of pipes and manholes depth is from

the invert level of pipes to the design asphalt level.

the price include erecteing Flexible Joints for manholes

at the main line of sewage

_Cleaning and testing all the installed pipes according

to technical specification, Engineers instructions and

coordinating with water department in the municipality

_All tests costs to be included in the unit rate items,

without any extra paid money.

_The price include reinstate repairing any damage

resulted from the work, all according to specification &

as per engineer instructions

_Covers of manholes are made of cast iron with

diameter 60 cm for all manholes sizes 25 ton capacity,

and engraved by the word " Sewage " in English and

Arabic. the r ing is from cast iron square shaped with

70*70 cm dimensions. The concrete used around the

ring is B300 for at least 30cm width and depth, Basalt

layer of 2 cm thick above the concrete and around the

cover to fix the ring should be supplied and installed, all

according to drawings, specifications and Engineers

instruction.

_All the above mentioned instructions are

considered part of the next items

UNIT QTYRATE (US$)

Total (US$)ITEM DESCRIPTION



6/12


PAL10-49740: Construction of 300 Residential Units in RafahITB2012-099

BILL NO.3

SEWAGE WORKS

Numbe In LettersUNIT QTY

RATE (US$)Total (US$)ITEM DESCRIPTION

3-1 UPVC Pipes:-

Supply, install and join, UPVC pipes SN8 250 mm

outside diameter. for the sewer networks with watertight

and flexible joints sealed with approved gasket rubber

ring including excavation in any ground for the depth

indicated in the drawings, shoring, shuttering, safety

measures, testing, sand beds all according to the

drawings, specifications and Engineers instruction.

L.M 150

3-2

200 mm outside diameter UPVC PipesL.M

120

3-3160 mm outside diameter UPVC Pipes L.M

1200

3-4 Manholes: -

Supply, install precast circular reinforced concreteB300

kg/cm2 Sewage manholes 1.25m internal diameter and

wall thicness 15 cm with reinforced base, cast iron

steps @30cm spacing, cast iron manhole cover,(25 ton

capacity), outlet pipes for future connection with end

cap where shown or necessary. The price including twoexternal bitumen coating, shuttering, excavation in any

ground to the depth indicated in the drawings, shoring,

safety measures, formwork, backfilling with sand,

removing the surplus soil to the tip ..etc. The price

includes also supply and install 10cm plain concrete

B200 under the base of the manhole and for benching.

The price includes also erecteing Flexible Joint 80-50

cm at connection btween pipe and manhole . All are as

per drawings , specifications and the engineer

instructions.

No 3

3-5

Ditto but Manholes with internal dia. 1. 0 m wall thicness

14 cm and 25 ton capacityNo 68

3-6

Ditto but Manholes with internal dia. 0.80 m wall

thicness 12.5 cm and 25 ton capacity No 62

3-6

Ditto but Manholes with internal dia. 0.60 m wall

thicness 7.5 cm and 40 cm opening with 8 ton capacity

cover

No 66

total



7/12



BILL NO.4

COMMUNICATION WORKS

Numbe In Letters

4 Communication Works

_The contractor has to submit detailed shop drawings of

the coming items for the approval by the PalTel

Company before starting the work.

_The Contractor has to visit the site for inspection.

_The price includes the cost of excavation to depth

indicated in drawings and using retaining shuttering,

shoring according to the instructions of Engineer,

bedding of 15 cm clean sand under ,around and above

the pipe with compaction, backfilling of the trench up to

design level in layers 25cm thick for each with

compaction 98% MDD and all required tests.

_The work includes removal of the surplus materials

outside the site to places as instructed by the Engineer.

_The work includes connection of the manholes to the

existing PalTel line after cleaning and adjusting the level

and orientation of the existing pipes if needed according

to engineer instructions.

_ The holes of the manholes have to be done using

core machine.

_ All the manholes have to be coated by one coat

primer and external hot bitumen coating 75/25.

_ Measurement of pipes and manholes depth is from

the invert level of pipes to the design asphalt level.

_Cleaning and testing all the installed pipes according

to technical specification, Engineers instructions and

coordinating with PalTel.

_All tests costs to be included in the unit rate items,

without any extra paid money.

The price includs supply and lay warning tape over the

pipe with text indicating the exiatance of PalTel line.

_The price includes installation of pulling ropes inside

the the PVC pipes

_The price includes reinstate repairing any damage

resulted from the work, all according to specification &

as per engineer instructions

_Covers of manholes are made of cast iron with

diameter 70 cm for all manholes sizes 25 ton capacity,

and engraved by the word " PalTel " in English and

Arabic. the r ing is from cast iron square shaped with

80*80 cm dimensions. The concrete used around the

ring is B350 for at least 30cm width and depth, Basalt

layer of 2 cm thick above the concrete and around the

cover to fix the ring should be supplied and installed, all

according to drawings, specifications and Engineers

instruction.

_All the above mentioned instructions are

considered part of the next items


Total (US$)



8/12



BILL NO.4

COMMUNICATION WORKS

Numbe In LettersITEM DESCRIPTION UNIT QTY

RATE (US$)Total (US$)

4-1 PVC Pipes:-

Supply, install and join single line of PVC pipes 4"

diameter V1. for the PalTel network with approved

gasket rubber ring including excavation in any ground

for min. 1.5m depth, shoring, shuttering, safety

measures, testing, sand beds all according to the

drawings, specifications and Engineers instruction.

L.M 800

4-2

Ditto but double lines of PVC pipes 4" V2L.M

620

4-3

Ditto but trible lines of PVC pipes 4" V3L.M

150

4-4Ditto but four lines of PVC pipes 4" V4 L.M

850

4-5

Supply, install and join single line of flexible PVC pipes

3" diameter for the PalTel house connection including

excavation in any ground for min. 1.5m depth, shoring,

shutter ing, safety measures, testing, sand beds all

according to the drawings, specifications and

Engineers instruction.

L.M 1000

Manholes: -

4-6 Supply, install precast circular reinforced concrete B300

kg/cm2 manhole 100cm internal diameter and wall

thicness 15 cm with cast iron manhole cover,(25 ton

capacity . The price includes two coats of external hot

bitumen, shuttering, excavation in any ground to the

depth of 1.5-2.0m, shoring, safety measures, formwork,

backfilling with sand, removing the surplus soil to

approved site ..etc. all as per drawings , specifications

and the engineer instructions.

No 31

4-7 Supply and cast in situe reinforced concrete B300

kg/cm2 for the manholes M1 with cast iron manhole

cover,(25 ton capacity . The price includes two coats of

external hot bitumen, shutter ing, excavation in any

ground to the internal height of 2.0 m, shoring, safetymeasures, formwork, backfilling with sand, removing

the surplus soil to approved site ..etc. all as per

drawings , specifications and the engineer instructions.

No 25

total



9/12



Bill No (5)

Electricity Works


A- Steel Poles and Bases:

5.1

Supply and Install Lattice Steel Pole L.S.P 70/80 12 m

long. with Steel Base ,Arms &brackets , B200 Concrete

Foundation, Lattice Pole Suspension Side Arm, K7972,1.5m, 1.st Phase. Auxiliary Steel Arm K160/3.

Transformer Isolator Side Arm , K1558 , 3m, Protection

Arm, K81. Anti-Climbing Steel Arm K113/8, for (L.S.P).

22 kV Pin & Tension type Insulators, Complete Low

Tension Insulator Unit, Wire KHF CU 95 mm2 Stranded

(Hard Drawn).

Line KHF CU 35 mm2 Stranded (Soft drawn). 22 kV

Cable 1*50 mm2 CU, XLPE.

With Steel bolts , Nuts , Washers ,Clamps, Earth Rod

15mm Diameter, 1.5 m. Wire PN CU 70 mm2 PVC

Yellow/Green and Master lock key.and all needed

fittings and accessories to hand over the work in clean

tested and good workmanship and operable Condition.

No. 1

5.2

Supply and Instal 24 kV, 630A Switchgear, and 16 kA

Short Circuit Current Ring Main Unit SF6, 2 incoming

switch Disconnectors, one Transformer Protection fuse

switch combination (CTC) With 22 kV Porcelain Fuses

63 A. Including cables Trench.and chaqar cover

No. 0

5.3

Supply and Install hermetically sealed Type,

1250KVA,22/0.4KV, ,Mineral oil Low losses

Transformer With Bushings and Arms for Fixing the

Cable, Beside the Transformer with cable ladder. The

Works Includes Transformer Concrete base B250 , And

all needed Lugs, Clamps ,Wires and Earthling system

for transformer and chaqar Plate cover for trenchs.

According to

Engineer Instructions and Approval of Gedco

No. 0

5.4

Supply and Install L.V Distribution Board 2000A with

Main CB IZM 2000A (8 Feeder).with Bus Bars 2000A,

NZM Circuit Breakers , KWH Meters , Current and

Voltage Instruments With CTs , wires , Clamps and all

needed Accessorizes Per drawings and Engineer

Instructions .

No. 0

5.5

Supply and Install Underground 22 kV Cable 1*240

mm2

AL, XLPE.The Works including Excavation 150

cm under ground Cable Trench and Backfilling with

Clean sand ,Warning Tape and concrete Slabs

(45x45x5)cm entire the length of trench ,6 inch UPVC

Pipes With compression lugs, Shrink Insulator for Lugs

(Color). PVC& Buckle Clamps with all needed wires

and Accessories as per Drawings .

L.m. 1200

5.6

Supply and Install LV Panel with main Vertical

Disconnect or switch LTL 630/400 Amps and 6 Vertical

Disconnector switch LTL 160/100 A including Earthing ,

civil structure 10 Nos ,4 Inch Pvc sleeves pipes and all

needed to fix and connect the Panel as per drawings.

No. 0

5.7


Disconnect or switch LTL 400//250 Amps With

LTL(3X63/40A) With Bus bars including earthing , civil

structure with 6mm thick chaqar plate cover with hand

held ,10 Nos ,4 Inch sleeves and all needed wires and

PVC Terminals connections to fix and connect

consumers Cables .with Electricity

No. 0

Total (US$)ITEM DESCRIPTION UNIT QTYRATE (US$)



10/12



Bill No (5)

Electricity Works

in Numbers In LettersTotal (US$)ITEM DESCRIPTION UNIT QTY

RATE (US$)

5.8


Disconnect or switch LTL 400//200 Amps with

LTL(3x63/40)A With Bus bars including earthing , civil

structure with 6mm thick Chaqar plate cover with hand

held ,8 No S,4 Inch Sleeves and all needed wires andPVC Terminals connections to fix and connect

consumers Cables .with Electricity

No. 0

5.9


Disconnector switch LTL400//160 Amps with

LTL(3x63/40)A and three phases Bus bars including

Neutral and Earthl ing Buses , civil structure with 6mm

thick Chaqar plate cover with hand held ,8 No S,4 Inch

Sleeves and all needed wires and PVC Terminals

connections to fix and connect consumers Cables .with

Electricity

No. 18

5.10Supply, Install and connect 0.6/1KV ,L.V Cable

3*240+120 mm2

CU, XLPE.L.m. 200

5.11Supply, install and connect 0.6/1KV,L.V Cable

3*150+75 mm2

CU, XLPE. L.m. 350

5.12Supply, Install and connect 0.6/1KV,L.V Cable

3*120+60 mm2

CU, XLPEL.m. 300

5.13Supply, Install and connect 0.6/1KV,L.V Cable 3*95+50

mm2

CU, XLPEL.m. 665


mm2

CU, XLPEL.m. 450


mm2

CU, XLPEL.m. 800


mm2

CU, XLPEL.m. 100

5.17

Supply, Install and connect L.V Cable 4*16 mm2

Cu.,

XLPE, including spring pipe 2", Civil works to lay the

cables and all needed to connect the dwelling unitsM.D.Bs with electricity .The work includes Excavation

80cm depth in soil and back filling with clean sand ,

warning tape and 80cm diameter manholes every 25

meter distance as per drawings and Engineer approval

.

L.m. 6000

5.18

Supply and Install materials for future installation of

Hot galvanized octagonal street light pole 8m long

including bolts galvanized steel base and B200

concrete foundations 1*1*1m.

No. 50

5.19Supply and Install 3" spring pipe dumped at 80cm deep

as following (pipe then 30cm soft sand then warning

tape then 50cm sand).as per drawings.L.m. 3500

5.2

Supply and Install N 8-4" UPVC pipe dumped at 80cm

deep as following (pipe then 30cm soft sand then

warning tape then 50cm sand) for low voltage Cables

crossings at The Roads.

L.m. 300

5.21 Supply and Install N2XY cable 3*35+16mm 2. L.m. 200

5.22 Supply and Install N2XY cable 5*16mm 2. L.m. 200

5.23 Supply and Install N2XY cable 5*6mm2. L.m. 500

5.24Supply and Install Cu stranded wire 35mm

2for

Earthing.L.m. 100

5.25

Excavation under ground high voltage cable trench 150

cm from finishing floor level in different soil levels at

road crossing and laying 6 inch pipes covered with 50

cm B200, concrete above the pipes and backfilling with

clean sand and compaction for cables trenches.

including warning tape and concrete slab 45x45x5 cm

entire the length of the trench as Per drawings .

L.m. 200



11/12



Bill No (5)

Electricity Works

in Numbers In LettersTotal (US$)ITEM DESCRIPTION UNIT QTY

RATE (US$)

5.26

Supply and Construct transformer room buildings with

two

lighting fixtures (2x36W) ,IP65 With lighting switch and

one socket , The work includes Transformer Base

foundation , High Voltage switchgear and low voltagemain trenches covered with 6 mm galvanized steel

chaqar plate entire the trenches . The room shall be

provided with painted galvanized steel door and

window with louvers, plastered internally and externally,

tiled and internally and externally painted . All the work

should be according to GEDCO Regulations, drawings,

specifications and approval of Engineer .

No. 2

Total



12/12



Bill No (1)

Bill No (2)

Bill No (3)

Bill No (4)

Bill No (5)

Telephone.

Fax .

Mobile .

Name of the contractor ......

Authorized signature ......

Signature and Sealing.

Title ...

Total in numbers ......................................................................

Total in letters ..............................................................................

Mobilization

Water Works

Sewage Works

Communication Works (PalTel)

Electricity Works

Bill No Description Total

Grand Total (US$) Not including ValueAdded Tax (VAT)

Summary


boq300resunits infras

Documents

Transcript of boq300resunits infras