Books and Monographs - Prof. M. Rafiqul...

LIST OF PUBLICATIONS REFEREED PUBLICATIONS Books and Monographs 1. A. Chakma, M.R. Islam, F. Berruti (Eds), 1989, Enhanced Oil Recovery, AIChE Monograph,

1989.

2. M.R. Islam, 2003, Revolution in Education, 553 pp., EECRG, Nova Scotia.

3. J.H. Abou-Kassem, Farouq Ali, S.M., and Islam, M.R., 2006, Petroleum Reservoir Simulation: A Basic Approach, Gulf Publishing Company, Houston, TX, USA, 480 pp., best seller for Gulf Publishing.

4. M. I. Khan and M.R. Islam, 2007, True Sustainability in Technological Development and

Natural Resource Management, Nova Science Publishers, NY, 381 pp., No. 2 best seller for Nova Science.

5. G.M. Zatzman, and M.R. Islam, 2007, Economics of Intangibles, Nova Science Publishers, NY,

407 pp., No. 5 best seller for Nova Science.

6. M. I. Khan, and M.R. Islam, 2007, The Petroleum Engineering Handbook: Sustainable Operations, Gulf Publishing Company, Houston, TX, 461 pp.

7. A. B. Chhetri and Islam, M.R., 2008, Inherently Sustainable Technology Developments, Nova

Science Publishers, New York, 452 pp. 8. M. E. Hossain, and M.R. Islam, 2009, An Advanced Analysis Technique for Sustainable

Petroleum Operations, VDM Publishing Ltd., Germany, 750 pp. 9. M.R. Islam, A.B. Chhetri, M.M. Khan, 2010, Greening of Petroleum Operations, Scrivener

Wiley, 852 pp. 10. M.R. Islam, H. Mousavizadeghan, S. Mustafiz, and J.H. Abou-kassem, 2010, Reservoir

Simulation: Advanced Approach”, Scrivener-Wiley, 468 pp. 11. Khan, M.M. and M.R. Islam, 2012, Zero-Waste Engineering, Scrivener-Wiley, 465 pp. 12. M.R. Islam (editor), Genetic Algorithm, Fuzzy Systems and Website Classification, Nova

Science Publishers, 226 pp.

2

13. Islam, M.R., A.B. Chhetri, and M.M. Khan, 2012, Green Petroleum, Scrivener-Wiley, 605 pp. 14. M.R. Islam, Zatzman, G.M., Islam, J.S., 2013, Reconstituting the curriculum, Scrivener-Wiley,

503 pp. 15. M.R. Islam, 2014, Unconventional Gas Reservoirs, Elsevier, 655 pp. 16. Islam, M.R., Islam, J.S., Mughal, M.A.H., Rahman, M.S., Zatzman, G.M., 2015, The Greening

of Pharmaceutical Engineering, Volume 1: Practice, Analysis, and Methodology, New York: Scrivener-Wiley, 778 pp.

17. M.R. Islam, J.S. Islam, G.M. Mughal, M.A.H., Rahman, M.S., Zatzman, G.M., 2016, The

Greening of Pharmaceutical Engineering, Volume 2: Theories and Solutions, Scrivener-Wiley 482 pp.


Greening of Pharmaceutical Engineering, Volume 3: Applications for Mental Disorder Treatments, Scrivener-Wiley, 500 pp.

19. M.R. Islam, M.E. Hossain, H. Mousavizadeghan, S. Mustafiz, and J.H. Abou-kassem, 2016,

Advanced Reservoir Simulation: Towards developing reservoir emulators”, Scrivener-Wiley, 520 pp.


Greening of Pharmaceutical Engineering, Volume 4: Applications for Physical Disorder Treatments, to be published.

21. James G. Speight, J.G. and M. R. Islam, Peak Energy: Myth or Reality? Wiley-Scrivener, 400

pp., 2016. 22. M.R. Islam, A Handbook of Flow Operations During Oil and Gas Production Operations,

Scrivener-Wiley, to be published in 2017. 23. Khan, M.M. and M.R. Islam, 2012, Zero-Waste Engineering: The era of inherent sustainability,

2nd Edition, Scrivener-Wiley, 660 pp. 24. M.R. Islam (ed.), Biology and Communication in the Information Age, 2013: Nova Science

publishers. 25. M.R. Islam (ed.), Characterization and Development of Novel Materials, 2011: Nova Science

Publishers. 26. M.R. Islam (ed.), Characterization and Development of Novel Materials Research

Compendium, 2013.

3

27. M.R. Islam (ed.), Genetic Algorithms, Fuzzy Systems and Website Classification, 2012, Nova Science Publishers

28. M.R. Islam and G.M. Zatzman (eds.), Intangibles in the Big Picture: The Delinearised History

of Time, 2009, Nova Science Publishers

29. M.R. Islam (ed.), Knowledge Management and Communication in the Information Age, Nova Science Publishers

Book Contributions 30. M.R. Islam, A.C. Chhetri, M.M. Khan, 2010, “Greening of Petroleum Operations”, Kirk-

Othmer Encyclopedia of Chemical Technology.

31. Newman-Bennett, M., MS Zaman, MG Satish, MR Islam, 2008, “Modeling of north triumph gas reservoir for carbon-dioxide Sequestration–a case study”, Advances in Fluid Mechanics VII, vol. 59, 447.

32. Chhetri, A.B. and Islam, M.R., 2007, “Greening of Petroleum Operations”, in Petroleum Science and Technology Research Advances, F. Columbus (ed.), Nova Science Publishers, New York.

33. Zatzman, G. and Islam, M.R., 2006, “Gas Energy Pricing”, in Gas Engineering Handbook, S. Mokhatab, W. Poe, and J. Speight (eds), Elsevier, 672 pp.

34. Bjorndalen, S. Mustafiz, A. Basu, M.R. Islam and K. Lee, 2005, “Interaction of oil spills in ice

infested waters: an experimental and Numerical investigation, Offshore Oil and Gas Environmental Effects Monitoring, Offshore Oil and Gas Environmental Effects Monitoring Armsworthy, S.L. Craford, P.J., and Lee, K. (editors), Batelle Press, Ohio, 399-414.

35. M. I. Khan, and M.R. Islam, 2005, “A Fugacity Model for Assessment of Environmental

Impact during Oil and Gas Production”, Offshore Oil and Gas Environmental Effects Monitoring, Armsworthy, S.L. Craford, P.J., and Lee, K. (editors), Batelle Press, Ohio, 399-414.

36. M.R. Islam, et al., 2002, “Mathematical Modelling of Abnormally High Formation Pressures”,

Origin and Prediction of Abnormal Pressures, G.V. Chilingar, Serebryakov, V.A., and Robertson, J.O., Jr., (eds.), Elsevier, Amsterdam, 311-351.

37. M.R. Islam, 2001, Foreword, Petroleum Geology of the South Caspian Basin: Description of

Selected Oil and Gas Reservoirs by L. A. Buryakovsky, G.V. Chilingar, F. Aminzadeh, Gulf Publishing, Boston, MA.

38. Islam, M.R., 2000, “State-of-the-art of Enhanced Oil Recovery”, Energy State of the Art 2000,

Ed. C.Q. Zhou, International Science Services, Charlottesville, VA, 325-344.

4

39. Islam, M.R., 1995, "Potential of Ultrasonic Generators for Use in Oil Wells and Heavy Crude

Oil/Bitumen Transportation Facilities", in Asphaltens - Fundamentals and Applications, E.Y. Shieu and D.A. Storm (eds), Plenum Publishers, New York.

40. Islam, M.R., 1995, "New Methods of Petroleum Sludge Disposal and Utilization", in

Asphaltens - Fundamentals and Applications, E.Y. Shieu and D.A. Storm (eds), Plenum Publishers, New York.

41. Cheema, T.J. and Islam, M.R., 1995, "A New Modeling Approach for Predicting Flow in

Fractured Formations", Groundwater Models for Resources Analysis and Management, Lewis Publishers, Boca Raton, FL, ed. El-Kady 327-338.

42. Islam, M.R., 1994, "Role of Asphaltenes in Heavy Oil Recovery", in Asphaltenes and Asphalts

1, Eds. Yen and Chilingar, Elsevier Scientific Publishers, Amsterdam-New York, 1994, 249-295.

43. Chakma, A., Islam, M.R., and Berruti, F., 1994, "Asphaltene-Viscosity Relationship of

Processed and Unprocessed Bitumen", in Asphaltene Particles in Fossil Fuel Exploration, Recovery, Refining and Production Processes, Plenum Publishers, New York, 1-12.

44. Islam, M.R. and Chakma, A., 1994, "Role of Asphaltene in Recovering Heavy Oil Through

Microbubble Generation", in Asphaltene Particles in Fossil Fuel Exploration, Recovery, Refining and Production Processes, Plenum Publishers, New York, 123-139.

45. Carter, J.M. and Islam, M.R., 1994, "Field-Scale Numerical Simulation of Bitumen

Mobilization During Steam/Solvent Injection", in Asphaltene Particles in Fossil Fuel Exploration, Recovery, Refining and Production Processes, Plenum Publishers, New York, 31-45.

46. Islam, M.R., 1991, "Cosurfactant-Enhanced Alkaline/Polymer Floods for Improving Recovery

in a Fractured Sandstone Reservoir", in Particle Technology and Surface Phenomena in Minerals and Petroleum, eds. Sharma and Sharma, Plenum Publishers, NY, 1991, 223-233.

47. Kamath, V.A., Islam, M.R., and S.L. Patil, 1991, "The Role of Asphaltene Aggregation in

Viscosity Variation and Miscible Flooding of Reservoir Hydrocarbons", in Particle Technology and Surface Phenomena in Minerals and Petroleum, eds. Sharma and Sharma, Plenum Publishers, NY, 1991, 1-21.

48. Jack, T.R., Stehmeier, L.G., Ferris, F.G., and Islam, M.R., 1991, "Microbial Selective Plugging

to Control Water Channeling", in Microbial Enhancement of Oil Recovery - Recent Advances, ed. Donaldson, Elsevier Science Publishing Co., New York, 433-440.

49. Islam, M.R. and Chakma, A., 1989, "Route to Chaos in Non-Darcy Flow in Fluid-

Saturated Porous Media", in Numerical Methods in Engineering, ed. Nicli, Computational Mechanics Publications, U.K., 1989, 8 pp.

5

Journal Publications In press 50. Nouri, A., Vaziri, H., Kuru, E. and Islam, M.R., “Sand Production Prediction in Oil

Wellbores: A Set of Criteria for Design of Reticulated Expandable Completion Techniques Based on Large-Scale Transient Experiments”. International Journal of Physical Modelling in Geotechnics.

51. Khan, M. M., Islam, M. R. A New Design for Direct Usage of Solar Energy. Energy Sources,

Part A, in press. 52. Zatzman, G.M., Mehedi, M.Y. and Islam, M.R., Comparative evaluation methodology and

some implications for produced-water management strategy, Energy Sources: in press.

53. Chhetri, A.B., Islam, M.R., A Global Sustainability Analysis of Nuclear Energy, Energies,

54. Chhetri, A.B. and Islam, M.R., A Comprehensive Pathway Analysis of Crude and Refined Petroleum Products, Energies.

Published

55. M.R. Islam, J.S. Islam, G.M. Zatzman, M.S. Rahman and M.M. Khan, 2014, “God, God’s Particle, God’s Wrath and Force of Nature: Delinearized History of Mass, Energy and Time”, Adv. Sust. Pet. Eng. Sci., vol. 6, issue 4.

56. J. S. Islam, G. M. Zatzman, M. A. H. Mughal and M. R. Islam, 2015, “Implications of a Comprehensive Material Balance Equation on Detection of the Causes of Medical Disorders, Part 1: Elimination of Paradoxes”, Journal of Characterization and Development of Novel Materials, vol. 7, no. 1, 1-17.

57. Islam, J.S., Zatzman, G.M., Mughal, M.A.H., and Islam, M.R., 2014, “A Comprehensive theory of time, mass, energy, and human thought material”, Journal of Nature Science and Sustainable Technology, vol. 8, no. 1, 181-215.

58. Islam, J.S., Zatzman, G.M., Mughal, M.A.H., and Islam, M.R., 2014, “A Knowledge-based cognitive model”, Journal of Information, Intelligence, and Knowledge, volume 6, no. 1, 1-30.

6

59. M. R. Islam, J. S. Islam, G. M. Zatzman and M. A. H. Mughal, 2013, Paradigm Shift in Education: A New Curriculum Fit for the Information Age, Journal of Information, Intelligence and Knowledge, Nova Science Publishers, vol. 5, no. 4, 1-17.

60. Zatzman, G.M. and Islam, M.R., 2013, “A New Knowledge-Based University Curriculum”,

Nature Science and Sustainable Technology Compendium, vol. 2, 225-240.

61. Islam, J.S., Zatzman, G.M., and Islam, M.R., M.R., 2013, “Comparison between Conventional and Knowledge-Based Teachning Methodology”, Nature Science and Sustainable Technology Compendium, vol. 2, 241-266.

62. Chaalal, O., and Islam, M.R., 2013, “Co-Teaching of Physical Chemistry with Hands-On

Curriculum”, Nature Science and Sustainable Technology Compendium, vol. 2, 267-282. / 63. Zaman, M.S., Islam, M.R., Mokhatab, S., 2012, “Nanotechnology Prospects in the Petroleum

Industry”, Pet. Sci. Tech. vol. 30, issue 10, 1053-1058.

64. Khan, M. M., Islam, M. R. and Zatzman, G. M., 2011, A Novel Approach to Comprehensive Economic Evaluations: Case Study of an Inherently Sustainable Technology Using Renewable Energy Sources. Energy Sources, Part B, vol. 6, issue 2, 145-155.

65. Biazar, J., Farrokhi, L., and Islam, M.R., 2011, “Modeling the pollution of a system of lakes”,

Applied Mathematics and Computation, 2581-2585.

66. Ketata, C. and Islam, M.R., 2011, “Characterization of Natural and Artificial Light”, Journal of Nature Science and Sustainable Technology, vol. 5, issue 1, 32-41.

67. Rahman, M.S. and Islam, M.R., 2010, “Effects of pH on Isotherms Modeling for Cu(II) ions

Adsorption Using Maple Wood Sawdust”, vol. 149, no. 1-3, 273-280.

68. Hossain, M.E., Ketata, C. and Islam, M.R., 2010, “Scaled Model Experiments of Waterjet Drilling”, Advances In Sustainable Petroleum Engineering Science, vol. 2, issue 1, 35-46.

69. Islam, M.R., Zatzman, G.M., Khan, M.M., Chilingar, G.V., “Can Global Warming/Cooling of

the Modern Era Be Explained wih the New Science”, Advances In Sustainable Petroleum Engineering Science, vol. 2, issue 1, 103-135.

70. Ali, M., Arjun, K.C., Ketata, C., and Islam, M.R., 2009, Microscopic Study of Oil Flocculation

and Coalescence Processes for Understanding the Role of Surfactants in EOR Performance. Petroleum Science and Technology, vol. 27, issue 12, 1251-1260.

71. Hosssain, M.E., Mousavizadegan, S.H., Islam, M.R., 2009, Effects of Memory on the Complex Rock-Fluid Properties of a Reservoir Stress-Strain Model, Petroleum Science and Technology, vol. 27, issue 10, 1109 – 1123.

72. Hossain, M E., Mousavizadegan, S. H. and Islam, M. R., 2009, Variation of Rock and Fluid Temperature during Thermal Operations in Porous Media. Petroleum Science and Technology, vol. 27, issue 6, 597-611.

7

73. Belhaj, H.A., Nouri, A., Vaziri, H.H., and Islam, M.R., “Laboratory Investigation of Effective Stresses Influence on Petrophysical Properties of Sandstone Reservoirs During Depletion”, J. Can. Pet. Tech., July 2009, 47-53.

74. Khan, M.M., Ketata, C., Islam, M.R., 2009, “The Formulation of Comprehensive Mass and

Energy Balance Equation”, vol. 1, issue 3, 169-188.

75. Basu, A. Islam, M.R., 2009, Scaling up of Chemical Injection Experiments. Petroleum Science and Technology, vol. 27, issue 7, 654-665.

76. Lakhal, S., M.I. Khan, & M. R. Islam (2009). An “Olympic” Framework for a Green

Decommissioning of an Offshore Oil Platform, Ocean and Coastal Management Journal. Volume 52: 113-123.

77. Al-Maamari, R.S., Hirayama, A., Sueyoshi, M.N., Abdalla, A.E., Al-Bemani, A.S., Islam,

M.R., 2009, The application of air-sparging, soil vapor extraction and pump and treat for remediation ofa diesel-contaminated freactured formation, Energy Sources Part A: Recovery, Utilization, and Environmental Effects, vol. 31:11, 911-922.

78. Rahman, M.S. and Islam, M.R., 2009, Effects of pH on isotherms modeling of Cu(II) ions adsorption using maple wood sawdust, Chemical Engineering Journal, vol. 149, 273-280.

79. Hossain, M.E., Liu, L. and Islam, M. R. (2009). Inclusion of the Memory Function in

Describing the Flow of Shear-Thinning Fluids in Porous Media. International Journal of Engineering (IJE), 3(5), pp. 458 – 477

80. Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R. (2009). Effects of Memory on the

Complex Rock-Fluid Properties of a Reservoir Stress-Strain Model. Petroleum Science and Technology, 27 (10), pp. 1109 – 1123.

81. Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R. (2009). Variation of Rock and Fluid

Temperature during Thermal Operations in Porous Media. Petroleum Science and Technology, 27, pp. 597 – 611

82. Hossain, M.E., Ketata, C., Khan, M.I. and Islam, M.R. (2009). Flammability and Individual

Risk Assessment for Natural Gas Pipelines. Advances in Sustainable Petroleum Engineering Science, 1(1), pp. 33 – 44.

83. Hossain, M.E., Ketata, C., and Islam, M.R., 2009, “A Scaled Model Study of

Waterjet Drilling”, Petroleum Science and Technology, vol. 27, issue 12, 1261-1273.

84. Hossain, M.E., Rahman, M.S., Ketata, C., Mann, H. and Islam, M.R. (2009). SEM-Based Structural and Chemical Analysis of Paraffin Wax and Beeswax for Petroleum Applications. Journal of Characterization and Development of Novel Materials, 1(1), 21 – 38

8

85. Hossain, M.E., Rahman, M.S., Ketata, C. and Islam, M.R. (2009). Molecular Structure Evaluation of Beeswax and Paraffin Wax by Solid-State 13C CP/MAS NMR. Journal of Characterization and Development of Novel Materials, 1(2), 101 – 110

86. Hossain, M.E., Rahman, M.S., Ketata, C. and Islam, M.R. (2009). A Comparative Study of Physical and Mechanical Properties of Natural and Synthetic Waxes for Developing Models for Drilling Applications. Journal of Characterization and Development of Novel Materials, 1(3), 189 – 206

87. Hossain, M.E., Ketata, C., and Islam, M.R. (2009). A Scaled Model Study of Waterjet Drilling.

Petroleum Science and Technology, 27, pp. 1261 – 1273. 88. Hossain, M.E., L Liu, M. R. Islam, 2009, “Inclusion of the memory function in describing the

flow of shear-thinning fluids in porous media”, International Journal of Engineering (IJE). Vol. 3, no. 5, 458.

89. Chhetri, A.B., Watts, K.C., Rahman, M.S., and Islam, M.R., 2009, “Soapnut Extract as a

Natural Surfactant for Enhanced Oil Recovery”, Pet Sci. Tech., vol. 31, issue 20, 1893-1903.

90. Rahman, M.S. and Islam, M.R., 2009, “Adsorption of Cd(II) ions from Synthetic Waste Water

Using Maple Sawdust”, Energy Sources Part A: Recovery, Utilization, and Environmental Effects, vol. 32, issue 95, 222-231.

91. Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R. (2008). Rock and Fluid Temperature

Changes during Thermal Operations in EOR Processes. Journal Nature Science and Sustainable Technology, March, 2(3), 347 – 378.

92. Zatzman, G.M., Abou-Kassem, J., and Islam, M.R., 2009, “Implications for Newtonian

Mechanics of the Nature-Science Standpoint of Mathematical Modeling Methods and Their Applications (Second of Two Parts), Journal Nature Science and Sustainable Technology, vol. 2, issue 3, 221-244.

93. Zatzman, G.M., Chhetri, A.B., Khan, M.M., Al-Maamari, R., and Islam, M.R., 2009, “Colony

Collapse Disorder: The Case or a Science of Intangibles”, Journal Nature Science and Sustainable Technology, vol. 2, issue 3, 245-290.

94. Chhetri, A.B., and Islam, M.R., 2009, “A Knowledge-Based Water and Wastwater

Management Model”, Journal Nature Science and Sustainable Technology, vol. 2, issue 3, 291-304.

95. Mustafiz, S., Zaman, M.S. and Islam, M.R., “The Effects of Linearization in Multi-Phase Flow

Simulation in Petroleum Reservoirs”, Journal Nature Science and Sustainable Technology, vol. 2, issue 3, 379-398.

9

96. Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R. (2008). The Effects of Thermal Alterations on Formation Permeability and Porosity. Petroleum Science and Technology, 26(10-11), pp. 1282 – 1302

97. Zatzman, G.M., Abou-Kassem, and Islam, M.R., 2008, “The Nature-Science Standpoint for

Mathematical Modeling”, vol. 2, issue 1-2, 1-20.

98. Chhetri, A.B. and Islam, M.R., 2008, “A Pathway Analysis of Food Products”, vol. 2, issue 1-2, 141-160.

99. Khan, M.I. and Islam, M.R., 2008, “Developing Sustainable Technologies for Offshore Seismic Operations”, Pet. Sci. Tech., vol. 26, issue 7-8, 790-812.

100. Rahman, M.S., Hossain, M.E. and Islam, M.R. (2008). An Environment-Friendly

Alkaline Solution for Enhanced Oil Recovery (EOR). Petroleum Science and Technology, 26(13), pp. 1596 - 1609

101. Pokharel, G.R., Chhetri, A.B., Khan, M.I., Islam, M.R., 2008, “Decentralized Micro Hydro-

Energy Systems in Nepal: En Route to Sustainable Energy Development”, Energy Sources B: Economics, Planning, and Policy, vol. 3, issue 2, 121-132.

102. Chhetri, A.B., Watts, C. and Islam, M.R., 2008, Waste Cooking Oil as an Alternate Feedstock

for Biodiesel Production. Energies, 1, 3-18. 103. Mustafiz, S., Mousavizadegan, H., and Islam, M.R., 2008, “Adomian Decomposition of

Buckley Leverett Equation with Capillary Terms”, Pet. Sci. Tech., vol. 26, issue 15, 1796-1810.

104. Chhetri, A.B., Ketata, C. and Islam, M.R., (2008) Impacts of Antibiotics in Human Health and their Fate into the Natural Environment, Journal of Nature Science and Sustainable Technology, vol. 3, No. 1, 1-21.

105. Chhetri, A.B., Adhikari, B.H., Islam, M.R., 2008, Groundwater Contamination and

Challenges in Meeting Increasing Water Demand, Journal of Nature Science and Sustainable Technology, vol. 3, No. 1, 21-40.

106. Chhetri, A.B. and Islam, M.R., 2008, “Towards Producing Truly Green Biodiesel”, Energy Sources. Part A, vol. 30:754–764.

107. Zekri, A.Y., Mustafiz, S. and Islam, M.R., 2008, “The Areal Sweep Efficiency of the First

Contact Miscible Displacements: An Experimental Approach”, Pet. Sci. Tech., vol. 26, issue 17, 2033 - 2047.

108. Rahman, M.S., M. E. Hossain, M.E., Islam, M.R., 2008, “An Environment-Friendly Alkaline Solution for Enhanced Oil Recovery”, Petroleum Science and Technology, vol. 26, Issue 13, 1596 – 1609.

10

109. Chhetri, A.B., Islam, M.R., 2008, “Problems Associated with Conventional Natural Gas

Processing and Some Innovative Solutions”, Petroleum Science and Technology, vol. 26, Issue 13, 1583 – 1595.

110. Mustafiz, S., Mousavizadegan, S.H. and Islam, M.R. (2008).The Effects of Linearization on Solutions of Reservoir Engineering Problems. Pet. Sci. Tech., vol. 26, no. 10-11, 1224-1246.

111. Chhetri, A., Adhikari, B.H., and Islam, M.R., 2008, “Wind Power Development in Nepal: Financing Options”, Energy Sources Part B: Economics, Planning, and Policy, vol. 3, no. 3, 233-242.

112. Hossain, M.E., Mousavizadegan, S.H. and Islam, M.R. (2008). The Effects of Thermal

Alterations on Formation Permeability and Porosity. Petroleum Science and Technology, vol. 26, no. (10-11), 1282-1302.

113. Mustafiz, S., and Islam, M.R. (2008). State-of-the-Art of Petroleum Reservoir Simulation. Pet. Sci. Tech., vol. 26, no. 10-11, 1303-1329.

114. Hossain, M.S. and Islam, M.R., 2008, “Experimental and Numerical Modeling of Arsenic Transport in Limestone”, Energy Sources, Vol. 30, issue 13, 1189 – 1201.

115. Chhetri, A.B. and Islam, M.R., 2008. A Critical Review of Electromagnetic Heating for

enhanced Oil Recovery. Petroleum Science and Technology, vol. 26, issue 14, 1619-31.

116. Hossain, M.E. and Islam, M.R., 2008, “An alternative fuel for motor vehicles”, Energy Sources, vol. 30, no. 10, January, 942-953.

117. Khan, M.I., Chhetri, A.B., and Islam, M.R., 2008. Analyzing Sustainability of Community-

Based Energy Development Technologies. Energy Sources – Part B, vol. 2, 403-419.

118. A. B. Chhetri, M. S. Tango, S. M. Budge, K. C. Watts and M. R. Islam, 2008, “Non-Edible as New Sources of Biodiesel Production”, Int. J. Mol. Sci. 2008, vol. 9, 169-180.

119. Chhetri, A.B., Khan, M.I. and Islam, M.R., 2008. A Novel Sustainably Developed Cooking

Stove. J. Nature Sci. and Sust. Tech., vol. 2, no. 3. 120. Rahaman, M.S., Basu, A., and Islam, M.R., 2008, “The Removal of As (III) and As (V)

from Aqueous Solutions by Waste Materials”, Bioresources Technology, vol. 99 (8), 2815-2823.

121. M.R. Islam, 2008, Without the science of intangibles, the earth is still flat, Journal of Physics : Conference Series, vol. 96, 11 pp.

122. Nouri, A., Vaziri, H., Islam, M.R., 2007, Comprehensive Transient Modeling of Sand

Production in Horizontal Wellbores”, SPE Journal, vol. 12, no. 4, pp. 468-474.

11

123. Khan, M.I., Chhetri, A.B., and Islam, M.R., 2007, Community-Based Energy Model: A

Novel Approach in Developing Sustainable Energy. Energy Sources-B, vol. 2, issue 4, 403-413.

124. Khan, M.I., Islam, M.R., 2007, “Analyzing Sustainability of Community-based Energy

Technologies”, Energy Sources B: Economics, Planning, and Policy, vol. 2, issue 4, 403-419.

125. Rahman, M.A., Mustafiz, S., Biazar, J., and Islam, M.R., 2007, “Experimental and numerical modeling of a novel rock perforation technique”, J. Franklin Institute, vol. 344 (5), 777-789.

126. Hossain, M.E., Mousavizadegan, S.H. Ketata, C. and Islam, M.R. (2007). A Novel

Memory Based Stress-Strain Model for Reservoir Characterization. Journal Nature Science and Sustainable Technology, 1(4), pp. 653 – 678

127. Abou-Kassem, J.H., Osman, M.E., Mustafiz, S., and Islam, M.R., 2007, “New Simple

Equations for Interblock Geometric Factors and Bulk Volumes in Single-well Simulation”, Pet. Sci. Tech., vol. 25, 615-630.

128. Mousavizadegan, H., Mustafiz, S., and Islam, M.R., 2007, “Multiple Solutions in Natural

Phenomena”Journal of Nature Science and Sustainable Technology, vol. 1, no. 2, 141-158.

129. Basu, A., Rahaman, M.S., Mustafiz, S., and Islam, M.R., 2007, “Batch studies of lead adsorption from a multicomponent aqueous solution into Atlantic Cod fish scale (Godus Morhua) substrate”, J. Environmental Engineering and Science, July, 455-462.

130. Nouri, A., Vaziri, H., Belhaj, H., Kuru, E., Islam, M.R., 2007, “Physical and Analytical

Studies of Sand Production from a Supported Wellbore in Unconsolidated Sand Media with Single- and Two-Phase Flow”, Journal of Canadian Petroleum Technology, vol. 46, no. 6, 41-48.

131. Biazar, J. and Islam, M.R., 2007, “The Adomian decomposition method for the solution of

transient energy equation in rocks subjected to laser irradiation”, Iranian J. Sci. Tech., Transaction A, Vol. 30, No. A2, 201-212.

132. Lakhal, S., H’mida, S., and Islam, M.R., 2007, “Green Supply chain Parameters for a

Canadian Petroleum Refinery Company”, Int. J. Environmental Technology and Management, vol. 7, nos. 1/2, 56-67.

133. Ma, F., Satish, M., and Islam, M.R., 2007, “Large Eddy Simulation of thermal jets in cross

flow”, Engineering Applications of Computational Fluid Mechanics, vol. 1, 25-35.

134. Rahman, M.A., Mustafiz, S., Kokal, M., and Islam, M.R., 2007, “Quantifying the Skin Factor for Estimating the Completion Efficiency of Perforation Tunnels in Petroleum Wells”,

12

Journal of Petroleum Science and Engineering, vol. 58, issues 1-2, August 2007, Pages 99-110.

135. Zatzman, G.M., and Islam, M.R., 2007, “Truth, Consequences and Intentions: The Study of

Natural and Anti-Natural Starting Points and Their Implications”, J. Nature Science and Sustainable Technology, vol. 1, no. 2, 169-174.

136. Nouri, A., Vaziri, H., Belhaj, H. and Islam, M.R., 2007, “Comprehensive Transient

Modeling of Sand Production in Horizontal Wellbores. SPEJ, Dec., 468-474.

137. Khan, M.M., Prior, D., and Islam, M.R., 2007, ”Zero-Waste Living with Inherently Sustainable Technologies”, J. Nature Science and Sustainable Technology, vol. 1, no. 2, 263-270.

138. Miralai, S., Khan, M.M., and Islam, M.R., 2007, “Replacing Artificial Additives with Natural Alternatives”, J. Nature Science and Sustainable Technology, vol. 1, no. 3, 403-434.

139. Zatzman, G.M., Khan, M.M., Chhetri, A.B., and Islam, M.R., 2007, “A Delinearized

History of Time and Its Roles in Establishing and Unfolding Knowledge of the Truth”, J. Nature Science and Sustainable Technology, vol. 1, no. 4.

140. Chhetri, A.B., Khan, M.I., and Islam, M.R., 2007, “A Novel Sustainable Cooking Stove”, J.

Nature Science and Sustainable Technology, vol. 1, no. 4.

141. Nouri, A., Vaziri, H., Kuru, H., Belhaj, H. and Islam, M.R. (2007) Physical and Analytical Studies of Sand Production from a Supported Wellbore in Unconsolidated Sand Media with Single- and Two-Phase Flow. Journal of Canadian Petroleum Technology (JCPT), June.

142. Nouri, A., Vaziri, H., Belhaj, H. and Islam, M.R. (2006) Sand-Production Prediction: A

New Set of Criteria for Modeling Based on Large-Scale Transient Experiments and Numerical Investigation. SPE Journal, Vol. 11, No. 2, pp. 227-237 (Also presented in the 2004 SPE Annual Technical Conference and Exhibition, Houston, TX).

143. Nouri, A., Vaziri, H., Kuru, E. and Islam, M.R. (2006) A Comparison of Two Sanding

Criteria in a Physical and Numerical Modeling of Sand Production. Journal of Petroleum Science and Engineering, Vol. 50, pp. 55-70.

144. Nouri, A., Vaziri, H., Belhaj, H., Shomakhi, N., Butt, S., Donalds, A. and Islam, M.R.

(2005) Physical Modeling of Sand Production from a Supported Wellbore in Weakly Consolidated Sandstone. Geotechnical Testing Journal (ASTM), Vol. 28, No. 5.

145. Al-Darbi, M.M., Saeed, N.O., Ajijolaiya, L.O., and Islam, M.R., 2006, “A Novel Oil Well

Cementing Technology Using Natural Fibers”, J. Pet. Sci. Tech., vol. 24, no. 12, 1267-1282.

13

146. Ajijolaiya, L.O., Hill, P.S., and Islam, M.R, 2007, “Qualitative Understanding of the Mechanism of Oil Mineral Interaction as Potential Oil Spill Countermeasure – A Review”, Energy Sources, vol. 29, 499-509.

147. Nouri, A., H. Vaziri, H. Belhaj, and M. R. Islam, 2007, “Comprehensive transient modeling

of sand production in horizontal wellbores,” SPE Journal, vol. 12, no. 4, pp. 468–474, 2007. 148. Basu, A., White, R.L., Mustafiz, S., and Islam, M.R., 2007, “Surface chemistry of Atlantic

cod scale”, J. Nature Sci. Sust. Tech., vol. 1, no. 1, 69-78.

149. Khan, M.M., Prior, D., and Islam, M.R., 2007, “A Novel Sustainable Combined Heating/Cooling/Refrigeration System, J. Nat. Sci. Sust. Tech., vol. 1, no. 1, pp. 133-162.

150. Ajijolaiya, L.O., Hill, P.S., Khelifa, A., and Islam, M.R., Lee, K., “Laboratory investigation

of the effects of mineral size and concentration on the formation of oil-mineral aggregates, Marine Pollution Bulletin, vol. 52, issue 8, 920-927.

151. Khan, M.I. and Islam, M.R., 2006, Sustainable Management Techniques for Sustainable

Offshore Oil and Gas Operations, Energy Sources -B, vol. 3, issue 2, 121-132. 152. Biazar, J., Tango, M., and Islam, M.R., 2006, “Ozone Decomposition of the second order in

aqueous solution”, Applied Mathematics and Computation, 220-225.

153. M.M. Al-Darbi, K.R. Agha, M.R. Islam, 2006, “Estimation of Substrate Concentration Profiles in Petroleum Pipelines Containing Biofilms”, J. Pet. Sci. Tech., vol. 24, no. 12, 1249-1265.

154. Chhetri, A.B. and Islam, M.R., 2006. Reversing Global Warming. J. Nat. Sci. and Sust.

Tech. 1(1): 79-114.

155. Paddock, J., Mustafiz, S., and Islam, M.R., 2006, “A New Technique for Cleaning

Horizontal Wellbores”, J. Pet. Sci. Tech., vol. 24, no. 7, 807-819.

156. Nouri, A., Vaziri, H., Belhaj, H., Islam, M.R., 2006, “Sand-Production Prediction: A New Set of Criteria for Modeling Based on Large-Scale Transient Experiments and Numerical Investigation”, SPE Journal, Vol. 11, No. 2, pp. 227-237.

157. Nouri, A., Vaziri, H., Kuru, E., Islam, M.R., 2006, “A Comparison of Two Sanding Criteria

in a Physical and Numerical Modeling of Sand Production”, J. Pet. Sci. Eng., vol. 50, pp. 55-70.

158. Zaman, M., Agha, K., and Islam, M.R., 2006, “Laser-Based Detection of Paraffin in Crude

Oil Samples: An Experimental and Numerical Study”, Pet. Sci. Tech., vol. 24, no. 1, 7-22.

14

159. Khan, M.M. and Islam, M.R., 2006, “A new downhole water-oil separation technique”, Pet. Sci. Tech., vol. 24, no. 7, 789-805.

160. Mokhatab, S., Fresky, M.A., and Islam, M.R., 2006, “Applications of Nanotechnology in Oil and Gas E&P, J. Pet. Tech., April.

161. Basu, A., Mustafiz, S., Islam, M.R., Bjorndalen, N., Rahaman, M.S., and Chaalal, O.,

2006, “A Comprehensive Approach for Modeling Sorption of Lead and Cobalt Ions through Fish Scales as an Adsorbent”, Chem. Eng. Comm., vol. 193, 580-605.

162. Henda, R., Hermas, A., Gedye, and Islam, M.R., 2005, “Microwave Enhanced Recovery of

Nickel-Copper Ore: Communition Floatability Aspects”, J. Microwave Power and Electromagnetic Energy, vol. 40, no. 1, 7-16.

163. Sandha, A., Agha, K.R., and Islam, M.R., 2005, “Artificial Intelligence as a decision

support system for petroleum engineers”, vol. 23, Issue 5-6, 593-603.

164. M. Al-Darbi, K.R. Agha, M.R. Islam, 2005, “Comprehensive modelling of the pitting biocorrosion of steel”, Can. J. Chem. Eng., vol. 83, no. 5, Oct., 872-881.

165. Nouri, A., Vaziri, H., Belhaj, H., Shomakhi, N., Butt, S., Donalds, A. and Islam, M.R.

(2005) Physical Modeling of Sand Production from a Supported Wellbore in Weakly Consolidated Sandstone. Geotechnical Testing Journal (ASTM), Vol. 28, No. 5.

166. Bjorndalen, N., Mustafiz, S., and Islam, M.R., 2005, “No-Flare Design: Converting Waste

to Value Addition”, Energy Sources, vol. 27, no. 3, 371-380.

167. Chaalal, O., Tango, M., and Islam, M.R., 2005, “A New Technique of Solar Bioremediation, Energy Sources, vol. 27, no. 3, 361-370.

168. Ghiasi, M. and Islam, M. R., Calculation of potential flow about an arbitrary body using

NURBS and Gaussian quadrature, Proc. Jangjeon Math. Soc. 8 (2005), no. 2, 209-218.

169. M. Al-Darbi, Saeed, N.O., Islam, M.R., and Lee, K., 2005, “Biodegradation of Natural Oils in Sea Water”, Energy Sources, vol. 27, no. 1-2, 19-34.

170. AlAwadhy, F., Abou-Kassem, J.H., Islam, M.R., 2005, Experimental and Numerical

Modeling of Sulfur Plugging in a Carbonate Reservoir, Energy Sources, vol. 27, no. 1-2, 3-18.

171. Bokhari, K., Islam, M.R., 2005, Improvement In The Time Accuracry Of Numerical Methods In Petroleum Engineering Problems – A New Combination, Energy Sources, vol. 27, no. 1-2, 45-60.

172. A. Solimany Nazar, M. Dabir, and Islam, M.R., 2005, Experimental and Mathematical

Modeling of Wac Deposition and Propagation in Pipes Transporting Crude Oil, Energy Sources, vol. 27, no. 1-2, 185-208.

15

173. A. Solimany Nazar, M. Dabir, and Islam, M.R., 2005, A Multi-solid phase thermodynamic

model for predicting was precipitation in petroleum mixtures, Energy Sources, vol. 27, no. 1-2, 173-184.

174. Nouri, A., Vaziri, H., Belhaj, H., Shomakhi, N., Butt, S., Donalds, A., Islam, R. (2005)

Physical Modeling of Sand Production from a Supported Wellbore in Weakly Consolidated Sandstone. Geotechnical Testing Journal (ASTM), Vol. 28, No. 5, 413-422.

175. N. Bjorndalen, and Islam, M.R., 2005, A Simple Correlation for Estimating Pressure Drop

in Horizontal Wells, Energy Sources, vol. 27, no. 1-2, 35-44.

176. O. Chaalal, A. Zekri, and M.R., 2005, Uptake of heavy metals by microorganisms: An experimental approach, Energy Sources, vol. 27, no. 1-2, 87-100.

177. Thirunavukkarasu, O.S., Viraraghavan, T., Subramanian, K.S., O. Chaalal, and Islam, M.R.,

2005, Energy Sources, vol. 27, no. 1-2, 209-220.

178. J. Biazar, M.A. Rahman, and Islam, M.R., 2005, Solution of partial diffusivity equation through perforation tunnel created by PS and PD technique including non-linear pressure gradient contributions”, Int. Mathematical Journal, vol. 6, no. 1, 1-6.

179. A. Sulisetyono and M.R. Islam, 2005, "Analytic solution of the memory part of the time

domain Green's function", Int. Mathematical Journal, vol. 6, no. 1, 31-38.

180. S. P. Panawalage, J. Biazar, M. Rahman, M. R. Islam, 2004, "An analytical approximation to the solution of reservoir permeability from the porous flow equation", Int. Math. J. vol. 5, no. 2, 113 - 122.

181. Panawalage, S. P., Rahman, M., Susilo, A. and Islam, M. R., 2004, Analytic and numerical

approaches of inverse problem in reservoir permeability, Far East J. Appl. Math. 17 (2004), no. 2, 207-219.

182. Panawalage, S. P., Biazar, J., Rahman, M. and Islam, M. R., 2004, An analytical

approximation to the solution of reservoir permeability from the porous flow equation, Int. Math. J., 5 (2004), no. 2, 113-122.

183. Paddock, J., M. Dong, and Islam, 2004, “A four-dimensional Equation for Crude Oils with

Microbubbles”, EEC Innovation, vol. 3, no. 1, 17 pp.

184. Basu, A., J. Akhter, Rahman, M.H., and Islam, M.R., 2004, “A review of separation of gases using membrane systems”, J Pet Sci Tech, vol. 22, no. 9-10, 1343-1368.

185. M. Zaman, K.R. Agha, M.R. Islam, 2004, “Detection of precipitation in pipelines”, J. Pet.

Sci. Tech., vol. 22, no. 9-10, 1119-1142.

16

186. Rahman, M.H., Wasiuddin, N., Islam, M.R., 2004, “Experimental and Numerical Modeling Studies of Arsenic Removal with Wood Ash from Aqueous Streams”, Candian Journal of Chemical Engineering, Oct., 968-977.

187. Agha, K.R., Belhaj, H.A., Mustafiz, S., Bjorndalen, N., and Islam, M.R., 2004, “Numerical

investigation of the prospects of high energy laser in drilling oil and gas wells”, Pet. Sci. Tech., vol. 22, no. 9-10, 1173-1186.

188. Mustafiz, S., Bjorndalen, Islam, M.R., 2004, “Lasing into the future: Potentials of laser

drilling in the petroleum industry”, Pet. Sci. Tech., vol. 22, no. 9-10, 1187-1198.

189. N. Bjorndalen, M.R. Islam, 2004, “The effect of microwave and ultrasonic irradiation on crude oil during production with a horizontal well”, J. Pet. Sci. Eng., vol. 43, Issues 3-4 , August 2004, Pages 139-150.

190. J. Biazar, M.R. Islam, 2004, “Solution of wave equation by Adomian decomposition

method and the restrictions of the method”, Applied Mathematics and Computation, vol. 149, 807-814.

191. J. Biazar, E. Babolian, M.R. Islam, 2003, “An alternate algorithm for computing Adomian

polynomials in special cases”, Applied Mathematics and Computation, vol. 138, no. 2-3, June, 523-529.

192. Mustafiz S., Rahaman, M. S., Kelly, D., Tango, M., Islam, M. R. 2003, “The

application of fish scales in removing heavy metals from energy-produced waste streams: the role of microbes”, Energy Sources, Vol. 25 (9), 905-916.

193. J. Biazar, E. Babolian, M.R. Islam, 2003, “Solution of a System of Volterra Integral

Equations of the First Kind by Adomian Method”, Applied Mathematics and Computation, vol. 139, 249-258.

194. Siddiqui, S., Talabani, S., Yang, J., Saleh, S., and Islam, M.R., “An Experimental

Investigation of the Diversion Characteristics of Foam in Berea Sandstone Cores of Contrasting Permeabilities”, J. Pet. Sci. Eng., vol. 37, no. 1-2, 51-67.

195. J. Biazar, M. Tango, E. Babolian, and M.R. Islam, “Solution of the kinetic modeling of

lactic acid fermentation using Adomian decomposition method”, Applied Mathematics and Computation, vol. 144, 433-439.

196. Bjorndalen, N., Mustafiz, S., and Islam, M.R., “Numerical Modeling of Petroleum Fluids

under Microwave Irradiation for Improved Horizontal Well Performance”, Int. Comm. Heat Mass Transfer, vol. 30, no. 6, 765-774.

197. Vaziri, H.H., Lemoine, E., Xiao, Y., and Islam, M.R., 2003, “Physical modeling study of

the influence of shale interbeds and perforation sequence on sand production”, J. Pet. Sci. Eng., vol. 37, no. 1-2, 11-24.

17

198. Vaziri, H.H., Xiao, Y., Islam, R. and Nouri, A. (2003) Numerical modeling of seepage-

induced sand production in oil and gas reservoirs, J. Pet. Sci. and Eng., 36, 71-86.

199. M.R. Islam, 2003, Issue dedicated to Prof. S.M. Farouq Ali on his 65th Birthday – Editorial, J. Pet. Sci. Eng., vol. 37, no. 1-2, pp. 1-3.

200. Bjorndalen, N., Mustafiz, S. and Islam, M.R., 2003, “High temperature solar furnace:

current applications and future potential”, Energy Sources, vol. 25, no. 1.

201. Bjorndalen, N., Mustafiz, S., Tango, M, and Islam, M.R., 2003, “Reduction of MIC using Microwave Irradiation”, J. Pet. Sci. Tech.

202. H.H Vaziri, , Y Xiao, R Islam, A Nouri, 2002, Numerical modeling of seepage-induced

sand production in oil and gas reservoirs, Journal of Petroleum Science and Engineering, Volume 36, Issues 1–2, October 2002, Pages 71–86

203. Nouri, A., M. M. Al-Darbi, H. Vaziri and M. R. Islam. 2002. Deflection Criteria for

Numerical Assessment of the Sand Production Potential in an Open-Hole Completion. Energy Sources 24(7): 685- 702

204. Siddiqui, S., Talabani, S., Saleh, S., and Islam, M.R., 2002, “Foam flow in low-

permeability Berea Sandstone cores: a laboratory investigation”, J. Pet. Eng. Sci., vol. 36, no. 3, 133-149.

205. A. Nouri, H. Vaziri, M.R. Islam, 2002, “A New Theory and Methodology for Modeling

Sand Production”, Energy Sources, vol. 24, no. 11, 995-1008.

206. N.M. Wasiuddin, M. Tango, M.R. Islam, 2002, “A Novel Method for Arsenic Removal at Low Concentrations”, Energy Sources, vol. 24, no. 11, 1031-1042.

207. M. AlDarbi, M. Jaralla, M.R. Islam, 2002, “The Inhibitive Characteristics of Mixed

Inhibitor Combinations Under Heat and Mass Transfer Conditions”, Energy Sources, vol. 24, no. 11, 1019-1030.

208. M. AlDarbi, Z. Muntasser, M. Tango, and M.R. Islam, 2002, “Control of Microbial

Corrosion Using Coatings and Natural Additives”, Energy Sources, vol. 24, no. 11, 1009-1018.

209. S. Mustafiz, A. Basu, M.R. Islam, O. Chalaal, A. Dowaidar, 2002, “A Novel Method for Heavy Metal Removal”, Energy Sources, vol. 24, no. 11, 1043-1052.

210. Nouri, A., Komak Panah,A., Pak, A. , Vaziri, H., Islam, M.R., 2002, “Evaluation of

hydraulic fracturing pressure in a porous medium by using the finite element method”, August , vol. 24, no. 8, 715-725.

211. M.S.A. Tango, and M.R. Islam, 2002, “Potential of Extremophiles for Biotechnological and

18

Petroleum Applications”, Energy Sources, June, vol. 24, no. 6, 543-559.

212. M.R. Islam, 2002, “Emerging Technologies in Subsurface Monitoring of Petroleum Reservoirs”, Petroleum Res. J., vol. 13, 33-46.

213. M.Z. Saghir, M. Chacha, M.R. Islam, 2002, “Transient convection of Te doped GaSb

induced by g-jitter”, J. Crystal Growth, vol. 234 (2-4), 285-295.

214. M. Nejad, M. Z. Saghir, and M. R. Islam, 2001, “Role of Thermal Diffusion on Heat and Mass Transfer in Porous Media”, Int. J. Comput. Fluid Dynamics, vol. 15, no. 3, 157-168.

215. Vaziri, H., Jalali, J.S., Islam, M.R., 2001. An analytical model for stability analysis of rock

layers over a circular opening. Int. J. Solids and Structures, vol. 38, 3735-3757.

216. M.Z. Saghir, H. Vaziri, M.R. Islam, 2001, “Heat and Mass Transfer Modeling of Fractured Formations”, Int. J. Comput. Fluid Dynamics, vol. 15, no. 4, 279-292.

217. Chaalal, O., and Islam, M.R., 2001, “Integrated Management of Radioactive Strontium

Contamination in Aqueous Stream Systems”, J. Env. Management, vol. 61, 51-59.

218. Kocabas, I., Islam, M.R., 2000, "Field-Scale Modeling of Asphaltene Transport in Porous Media", J. Pet. Sci. Eng., vol. 26(1-4), 19-30.

219. H.H. Ibrahim and M. R. Islam, 2000, “An overview of asphaltene phase behaviour”, Energy

Sources, May-June.

220. J. E. Paez , R. Blok, and M.R. Islam, 2000, “Problems in Gas Hydrates: Formation Mechanisms and Elimination Methods”, Energy Sources, May-June.

221. Kocabas,I. and Islam, M.R., 2000, “Analytical Solutions to Convective Diffusive Problems

with Chemical Reactions. Part I, Linear Systems”, J. Pet. Sci. Eng., vol. 26(1-4), 211-220.

222. Kocabas, I. and Islam, M.R., 2000, “Analytical Solutions to Convective Diffusive Problems with Chemical Reactions. Part II. Radial Systems”, J. Pet. Sci. Eng., vol. 26(1-4), 221-230.

223. Talabani, S. and Islam, M.R., 2000, “A New Cementing Technology for Controlling

Downhole Corrosion”, J. Pet. Sci. Eng., vol. 26(1-4), 43-48.

224. Saghir, Z., Chaalal, O. and Islam, M.R., 2000, “Experimental and Numerical Modeling of Viscous Fingering”, J. Pet. Sci. Eng., vol. 26(1-4), 253-262.

225. Gunal, G.O. and Islam, M.R., 2000, “Alteration of asphaltic crude rheology with

electromagnetic and ultrasonic irradiation”, J. Pet. Sci. Eng., vol. 26(1-4), 263-272.

226. Saghir, M.Z. and Islam, M.R., 1999, “Viscous Fingering During Miscible Liquid-Liquid Displacement in Porous Media”, Int. J. Fluid Mech. Research, vol. 26, no. 4, 215-226.

19

227. Bener, A., Islam, M.R., 1999, “Determinations of Carbon Monoxide Exposure and Blood

Carboxyhemoglobin levels from motor vehicles exhaust emissions”, J. Aerobiology, May.

228. Malik, Q. and Islam, M.R., 1999, “Potential of Greenhouse Gas Storage and Utilization Through Enhanced Oil Recovery”, Reviews in Process Chemistry and Engineering, Feb., 43-56.

229. Bener, A., Islam, M.R., Lestringant, et al., 1999, "Respiratory Symptoms and Skin

Disorders in Sewage Workers", J. Env. Sci. and Health, vol. A33 (8), 1657-1674.

230. Al-Maghrabi, I., Bin-Aqil, A.O., Chaalal, O. and Islam, M.R., 1999, "Use of Thermophilic Bacteria for Bioremediation of Petroleum Contaminants", Energy Sources, vol. 21 (1/2), 17-30.

231. Livingston, R.J., and Islam, M.R., 1999, "Laboratory Modeling, Field Study and Numerical

Simulation of Bioremediation of Petroleum Contaminants", Energy Sources, vol. 21 (1/2), 113-130.

232. Saghir, Z., and Islam, M.R., 1999, "Double Diffusive Convection in a Multi-Cavity,

Layered Porous Bed", Int. J. Heat Mass Transfer, vol. 42 (4), 437-457.

233. Zhong, L., Siddiqui, S., and Islam, M.R., 1999, "A Standard Method for Testing Acidization-Foam-Forming Surfactants", Energy Sources, vol. 21 (1/2), 191-213.

234. M.Z. Saghir, M.R.Islam, N. Maffei and D. Quon, 1999, “Three-Dimensional Modeling of

Bi12GeO20 Using the Float Zone Technique”, International Journal of Crystal Growth, Journal of Crystal Growth, Vol. 193, No. 4, pp. 623-635.

235. Talabani, S., G. Hareland, and Islam, M.R., 1999, “Optimum Concentration of Plastic

Materials During Oil Well Cementing”, Energy Sources, vol. 21 (1/2), 163-176.

236. Islam, M.R., 1999, “Emerging Technologies in Enhanced Oil Recovery”, Energy Sources, vol. 21 (1/2), 78-91.

237. Ali, M. and Islam, M.R., 1998, "The Effect of Asphaltene Precipitation on Carbonate Rock

Permeability: An Experimental and Numerical Approach", SPE Production and Facilities, August, 78-83.

238. Saghir, M. Z., Hennenberg, M., and Islam, M.R., 1998, “Double Diffusive Convection with

Marangoni Effects in a Multi-Cavity System”, Int. J. Heat and Mass Transfer, vol. 41 (14), 2157-2174.

239. Saleh, S.T., Rawalani, M. El-Rabaa, W. and Islam, M.R., 1997, "Formation Damage

Assessment in Horizontal Wells", J. Petroleum Science and Engineering, vol. 17, 87-99.

240. Choi, E.S., Cheema, T.J., and Islam, M.R., 1997, "A New dual porosity/dual permeability

20

model with non-Darcian flow through fractures", J. Petroleum Science and Engineering, vol. 17, 331-344.

241. Sarwar, M. and Islam, M.R., 1997, "A Non-Fickian Surface Excess Model for Chemical

Transport Through Fractured Porous Media", Chem. Eng. Comm., vol. 160, 1-34.

242. Kaleli, H.A. and Islam, M.R., 1997, “Effect of Temperature on the Growth of Waste-Water Bacteria”, Env. Chemistry and Toxicology, vol. 59 (1-4), 111-125.

243. Basu, A. and Islam, M.R., 1996, "Instability in a Combined Heat and Mass Transfer

Problem in Porous Media", Chaos, Solitons & Fractals, vol. 7, no. 1, 109-123.

244. Cheema, T.J. and Islam, M.R., 1995, "Comparison of Cave Passageways with Fracture Traces and Joints in the Black Hills Region of South Dakota: Reply", NSS Bulletin, Dec., 112.

245. Katz, S., Chilingar, G.V., and Islam, M.R., 1995, "Estimation of Reservoir Porosity and

Relative Volume of Pore Filling Components Using Multiple Sources of Geophysical Data", J. Pet. Sci. Eng., vol. 13, no. 2, 103-112.

246. Katz, S., Chilingar, G.V., and Islam, M.R., 1995, "Pattern Based Methodology for

Characterization of Layered Geological Formations", J. Pet. Sci. Eng., vol. 13, no. 1, 47-56.

247. Gollapudi, U.K., Knutson, C.L., Bang, S.S., and Islam, M.R., 1995, "A New Technique for Plugging Permeable Formations", Chemosphere, vol. 30(4), 695-705.

248. Islam, M.R., 1995, "A New Technique for Recovering Heavy Oil and Tar Sands",

International Journal of Science & Technology, vol. 2, no. 1, 15-28.

249. Islam, M.R. and Chilingar, G.V., 1995, "Mathematical Modeling of Three-Dimensional Microbial Transport in Porous Media", International Journal of Science & Technology, vol. 2, no. 2, 55-64.

250. Cheema, T. and Islam, M.R., 1994, "A New Technique for Determining Anisotropy of a

Fractured Formation", AEG Bull., vol. 31(3), 329-341.

251. Sundaram, N.S. and Islam, M.R., 1994, "Scaled Model Studies of Petroleum Contaminant Removal from Soils Using Surfactant Solutions", J. Hazardous Materials, vol. 38, 89-103.

252. Islam, M.R., 1994, "A New Recovery Technique for Gas Production From Alaskan Gas

Hydrates", J. Pet. Sci. Eng., vol. 11(4), 267-281.

253. Sundaram, N.S., Sarwar, M., Bang, S.S., and Islam, M.R., 1994, "Biodegradation of Anionic Surfactants in the Presence of Petroleum Contaminants", Chemosphere, vol. 26 (6), 1253-1261.

254. Islam, M.R., Chakma, A., Jha, K., 1994, "Heavy Oil Recovery by Inert Gas Injection

21

with Horizontal Wells", J. Pet. Sci. Eng., vol. 11 (3), 213-226.

255. Bansal, A. and Islam, M.R., 1994, "Scaled Model Studies of Heavy Oil Recovery From Alaskan Reservoir Using Gas Injection with Horizontal Wells", J. Canadian Petroleum Technology, vol. 33 (6), 52-62.

256. Wadadar, S.S., and Islam, M.R., 1994, "Numerical Simulation of Electromagnetic Heating

of Alaskan Tar Sands Using Horizontal Wells", J. Can. Petroleum Technology, vol. 33(7), 37-43.

257. Cheema, T. and Islam, M.R., 1994, "Comparison of Cave Passageways with Fracture

Traces and Joints in the Black Hills Region of South Dakota", NSS Bulletin, vol. 56, 95-102.

258. Islam, M.R., and Farouq Ali, S.M., 1994, "Numerical Simulation of Emulsion Flow Through Porous Media", J. Can. Pet. Tech., vol. 33 (3), 59-63.

259. Song, F.Y. and Islam, M.R., 1994, "Effect of Salinity and Rock Type on Sorption Behavior

of Surfactants as Applied in Cleaning of Petroleum Contaminants", J. Pet. Sci. Eng., vol. 10 (4), 321-336.

260. Islam, M.R., 1993, "Route to Chaos in Porous Media with an Internal Heat Source",

Transient Phenomena in Nuclear Reactor Systems, Peterson and Kim, eds., HTD-Vol. 245, no. 11, 39-45, ASME, NY.

261. Islam, M.R., 1993, "Oil Recovery from Bottomwater Reservoirs", J. Pet. Tech., Technology

Today Series, June, 514-516.

262. Islam, M.R. and Chakma, A., 1993, "Storage and Utilization of CO2 in Petroleum Reservoirs-A Simulation Study", Energy Conversion and Management, vol. 34 (9), 1205-1212.

263. Islam, M.R. and Farouq Ali, S.M., 1993, "Use of Silica Gel for Improving

Waterflooding Performance of Bottomwater Reservoirs", J. Pet. Sci. Eng., vol. 8, 303-313.

264. Islam, M.R., 1993, "Route to Chaos in Chemically Enhanced Thermal Convection in Porous Media", Chem. Eng. Comm., vol. 124, 77-95.

265. Russman, B. and Islam, M.R., 1993, "Flow Instabilities in an Inclined Porous Medium

Under Non-Darcy Flow Regime", AIChE Symp. Series, ed. Volintine, vol. 89 (295), 174-183.

266. Islam, M.R., 1993, "Mixed Convection in a Large-Aspect Ratio Porous Medium under Non-Darcy Flow Regime", Mixed Convection Heat Transfer, eds. Keyhani and Kumar, HTD-Vol. 247, ASME, 79-86.

267. Islam, M.R., Gianetto, A., 1993, "Mathematical Modelling and Scaling Up of Microbial

Enhanced Oil Recovery", J. Canadian Petroleum Technology, vol. 32 (4), 30-36.

22

268. Sattar, M.A. and Islam, M.R., 1993, "Flow Instability in a Large Aspect Ratio Porous

Medium with an Internal Heat Source", Chaos, Solitons & Fractals, vol. 3 (2), 149-169.

269. Islam, M.R., Erno, B.P. and Davis, D., 1992, "Hot Water and Gas Flood Equivalence of In Situ Combustion", J. Canadian Petroleum Technology, vol. 31 (8), 44-52.

270. Islam, M.R., 1992, "Evolution in Oscillatory and Chaotic Flows in Mixed Convection

in Porous Media in Non-Darcy Regime", Chaos, Solitons & Fractals, vol. 2 (1), 1992, 51-71.

271. Islam, M.R. and Chakma, A., 1992, "A New Recovery Technique for Heavy Oil Reservoirs With Bottomwater", SPE Res. Eng., vol. 7(2), 180-186.

272. Islam, M.R. and Farouq Ali, S.M., 1991, "Scaling of In-Situ Combustion

Experiments", J. Pet. Sci. Eng., vol. 6, 367-379.

273. Islam, M.R. and George, A.E., 1991, "Sand Control in Horizontal Wells in Heavy Oil Reservoirs", J. Pet. Tech., vol. 43 (7), 844-853.

274. Kowalski, C., Berruti, F., Chakma, A., Gianetto, A., Islam, M.R., 1991, "A Mechanistic

Model for Microbial transport, Growth and Viscosity Reduction in Porous Media", AIChE Symp. Series, vol. 87 (280), 123-133.

275. Islam, M.R., and Chakma, A., 1991, "Mathematical Modelling of Enhanced Oil Recovery

by Alkali Solutions in the Presence of Cosurfactant and Polymer", J. Pet. Sci. Eng., vol. 5, 105-126.

276. Islam, M.R., Macdonald, T., Chakma, A., and Farouq Ali, S.M., 1991, "A New

Mathematical Representation of Foam Flow Through Porous Media Under Reservoir Conditions", AIChE Symp. Series, vol. 87 (280), 74-88.

277. Islam, M.R. and Chakma, A., 1990, "Mathematical Modelling of Visbreaking in a Jet

reactor", Chem. Eng. Sci., vol. 45 (8), 2769-2775.

278. Islam, M.R., Chakma, A. and Nandakumar, K., 1990, "Flow Transition in Mixed Convection in a Porous Medium Saturated With Water Near 4 C", Can. J. Chem. Eng., vol. 68, 777-785.

279. Islam, M.R. and Farouq Ali, S.M., 1990, "Numerical Simulation of Foam Flow in Porous

Media", J. Can. Pet. Tech., vol. 29 (4), 47-51.

280. Islam, M.R. and Nandakumar, K., 1990, "Transient Convection in Saturated Porous Layers With Internal Heat Sources", Int. J. Heat and Mass Transfer, vol. 33 (1), 151-161.

281. Islam, M.R. and Chakma, A., 1990, "Simulation of Activated Carbon Adsorbers Used in

Gas Plants", Gas Separation and Purification, vol. 4, June, 103-108.

23

282. Islam, M.R. and Farouq Ali, S.M., 1990, "New Scaling Criteria for Chemical Flooding

Experiments", J. Canadian Petroleum Technology, vol. 29 (1), 29-36.

283. Taylor, K.C., Hawkins, B.F., and Islam, M.R., 1990, "Dynamic Interfacial Tension in Surfactant-Enhanced Alkaline Flooding", J. Canadian Petroleum Technology, vol. 29 (1), 50-55.

284. Islam, M.R. and Farouq Ali, S.M., 1989, "New Scaling Criteria for Polymer, Emulsion

and Foam Flooding Experiments", J. Canadian Petroleum Technology, vol. 28 (4), 79-87.

285. Islam, M.R., Selby, R., and Farouq Ali, S.M., 1989, "Mechanics of Foam Flow in Porous Media and Applications", J. Canadian Petroleum Technology, vol. 28 (4), 88-96.

286. Islam, M.R. and Nandakumar, K., 1989, "Cellular Pattern Evolution in An Inclined

Porous Medium With Internal Heat Generation", AIChE Symposium Series, vol. 85 (269), 338-343.

287. Islam, M.R. and Farouq Ali, S.M., 1989, "Waterflooding Oil Reservoirs with Bottom

Water", J. Canadian Petroleum Technology, vol. 28 (3), 59-66.

288. Islam, M.R. and Nandakumar, K., 1988, "Mixed Convection Heat Transfer in Porous Media in the Non-Darcy Regime", Can. J. Chem. Eng., vol. 66 (1), 68-74.

289. Islam, M.R. and Farouq Ali, S.M., 1987, "Mobility Control in Waterflooding Oil

Reservoirs with a Bottom-Water Zone", J. Can. Pet. Tech., vol. 26 (6), 40-53.

290. Islam, M.R. and Bentsen, R.G., 1987, "Effect of Different Parameters on Two-Phase Relative Permeability", AOSTRA J. Res., vol. 3, Spring, 69-90.

291. Chakma, A., Lielmezs, J., and Islam, M.R., 1987, "Saturated Vapour- Liquid Equilibria

Calculation with Modified Martin Equation of State", Thermochimica Acta, vol. 111, 311-319.

292. Islam, M.R. and Nandakumar, K., 1986, "Multiple Solution for Buoyancy-Induced Flow in Saturated Porous Media for Large Peclet Numbers", Trans. ASME Journal of Heat Transfer, vol.108 (4), 866-871.

293. Dranchuk, P. M., Islam, M.R., and Bentsen, R.G., 1986, "A Mathematical Representation of

the Carr, Kobayashi and Burrows Natural Gas Viscosity", J. Can. Pet. Tech., vol. 25 (1), 51-56.

294. Islam, M.R. and Bentsen, R.G., 1986, "A Dynamic Method for Measuring Relative

Permeability", J. Can. Pet. Tech., vol. 25 (1), 39-50. Refereed Conference Proceedings

24

295. Khan, M.M., Zatzman, G.M. and Islam, M.R. (2008) The Formulation of a Comprehensive Mass and Energy Balance Equation, Proc. ASME International Mechanical Engineering Congress and Exposition, Nov. 2-6, Boston, MA.

296. Khan, M.M. and Islam, M.R., 2008, Investigation of Vegetable Oil as Thermal Fluid in Parabolic Solar Collector, IMECE2008-69125, Heat Transfer, Fluid Flows, and Thermal Systems, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, November 2-6, Boston, MA.

297. Islam, M.R. and Zatzman, G. M., 2008, A New Knowledge-Based University Curriculum, Proc. 2nd Int. Conf. Innnovations in Learning for the Future 2008 e-Learning, S. Gulsecen and Z. Ayvas-Reis (eds.), 115-128.

298. Islam, M.R., Ashour, I., and Zatzman, G.M., 2008, Comparison Between Two Teaching

Methodologies, 2nd Int. Conf. Innnovations in Learning for the Future 2008 e-Learning, S. Gulsecen and Z. Ayvas-Reis (eds.), 129-143.

299. Zatzman, G.M. and Islam, M.R., 2008, Examining What Makes Life Worth Living:

Researchers and Educators Discuss Why They Do What They Do, 2nd Int. Conf. Innnovations in Learning for the Future 2008 e-Learning, S. Gulsecen and Z. Ayvas-Reis (eds.), 460-484.

300. Zaman, M.S., Mousavizadegan, H., Satish, M., and Islam, M.R., 2007, “Towards

Comprehensive Modeling of Multiphase Fluid Flow Pumping Systems Using Smooth Particle Hydrodynamics”, Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2007, ASME, June, San Diego, CA.

301. Ketata, C., Satish, M.G., and Islam, M.R., 2007, “Abacus-Based Calculators”, Proc.

International Conference of Computational and Experimental Engineering and Sciences (ICCES-2007), Miami, Florida, Jan.

302. Ketata, C., Satish, M.G., and Islam, M.R., 2007, “Dynamic Numbers for Chaotic Nature”,

Proc. International Conference of Computational and Experimental Engineering and Sciences (ICCES-2007), Miami, Florida, Jan.

303. Ketata, C., Satish, M.G., and Islam, M.R., 2007, “Chaos Laws of Motion”, Proc.

International Conference of Computational and Experimental Engineering and Sciences (ICCES-2007), Miami, Florida, Jan.

304. Ketata, C., Satish, M.G., and Islam, M.R., 2006, “The Meaningful Infinity”, Proc.

Conference on Computational Intelligence for Modelling,. Control and Automation (CIMCA), IEEE Conference, Nov., Sydney, Australia.

305. Ketata, C., Satish, M.G., and Islam, M.R., 2006, “Chaos Numbers”, Proc. Conference on

25

Computational Intelligence for Modelling,. Control and Automation (CIMCA), IEEE Conference, Nov., Sydney, Australia.

306. Ketata, C., Satish, M.G., and Islam, M.R., 2006, “Multiple-Solution Nature of Chaos

Number-Oriented Equations”, Proc. Conference on Computational Intelligence for Modelling,. Control and Automation (CIMCA), IEEE Conference, Nov., Sydney, Australia.

307. A.B . Chhetri, B.H. Adhikari, and M.R. Islam, 2006. Increasing Water Demand and

Groundwater Contamination. International Conference on Management of Water, Wastewater and Environment: Challenges for the Developing Countries. September, 13-15, Kathmandu, Nepal.

308. A.B. Chhetri and M.R. Islam, 2006. A Knowledge-Based Water and Wastewater

Management Model. 2nd International Conference on Appropriate Technology , July 12-14, Zimbabwe.

309. A.B Chhetri, M. S. Rahman and M.R. Islam, 2006. Production of Truly 'Healthy' Health

Products. 2nd International Conference on Appropriate Technology, July 12- 14, Zimbabwe.

310. A.B. Chhetri, M.S.Zaman and M.R. Islam, 2006. Effects of Microwave Heating and Refrigeration on Food Quality. 2nd International Conference on Appropriate Technology, July 12-14, Zimbabwe.

311. M.I. Khan, S. Lakhal, M.R. Islam, 2006, “Offshore platform decommissioning: An

application of the Olympic Green Supply Chain”, Proc. 36th Conference on Computer and Industries, June, Taiwan.

312. M. Shamsuzzman, S. Mokhatab, M.R. Islam, 2006, “Potential of Nanotechnology in

Petroleum Industry: A Review”, Proc. 36th Conference on Computer and Industries, June, Taiwan.

313. M Shamsuzzaman, M R Islam, E Shakshuki, S Hussain, 2006, “Measurement of Petroleum

Reservoir Data using a Novel Network System”, Proc. 36th Conference on Computer and Industries, June, Taiwan.

314. Sajid Hussain, M Rafiqul Islam, Elhadi Shakshuki, MS Zaman, 2006, Agent-based

petroleum offshore monitoring using sensor networks, Proc. . 17th International IEEE Workshop on Database and Expert Systems Applications, DEXA'06, 103-107.

315. M.M. Khan, A. Mills, O. Chaalal, M.R. Islam, 2006, “Novel Bioabsorbents for the Removal

of Heavy Metals from Aqueous Streams”, Proc. 36th Conference on Computer and Industries, June, Taiwan.

316. M.M. Khan, M.R. Islam, 2006, “Zero-Waste Living with Inherently Sustainable

Technologies”, Proc. 36th Conference on Computer and Industries, June 20-23, Taiwan, R.O.C.

26

317. M. E. Hossain, M.R. Islam, 2006, “Fluid Properties with Memory - Critical Review and Addition”, Proc. 36th Conference on Computer and Industries, June, Taiwan.

318. Ketata C., Satish M.G. and Islam M.R., 2006. Cognitive Work Analysis of Expert Systems

Design and Evaluation in the Oil and Gas Industry, ICCIE ’06 Proceedings, 36th International Conference on Computers and Industrial Engineering, Taipei, Taiwan, R.O.C., June 20-23.

319. Ketata C., Satish M.G. and Islam M.R., 2006. The Meaningful Zero, ICCIE ’06

Proceedings, 36th International Conference on Computers and Industrial Engineering, Taipei, Taiwan, R.O.C., June 20-23.

320. Ketata C., Satish M.G. and Islam M.R., 2006. Laying the Foundation for Pro-Nature Expert

Systems in Petroleum Engineering, ICCIE ’06 Proceedings, 36th International Conference on Computers and Industrial Engineering, Taipei, Taiwan, R.O.C., June 20-23.

321. Ketata C., Satish M.G. and Islam M.R., 2006. Revising Darcy’s Law: A Necessary Step

toward Progress in Fluid Mechanics and Reservoir Engineering, AFM ’06 Proceedings, 6th International Conference on Advances in Fluid Mechanics, Skiathos, Greece, May 8-10.

322. Ketata C., Satish M.G. and Islam M.R., 2005. Stochastic Evaluation of Rock Properties by

Sonic-While-Drilling Data Processing in the Oil and Gas Industry, ICCES ’05 Proceedings, International Conference on Computational & Experimental Engineering and Sciences, Chennai, India, December 1-6.

323. Ketata C., Satish M.G. and Islam M.R., 2005. Stochastic Modeling and Forecasting of

Crude Oil Prices, ICCES ’05 Proceedings, International Conference on Computational & Experimental Engineering and Sciences, Chennai, India, December 1-6.

324. Ketata C., Satish M.G. and Islam M.R., 2005. Knowledge-Based Optimization of Rotary

Drilling System in the Oil and Gas Industry, ICCES ’05 Proceedings, International Conference on Computational & Experimental Engineering and Sciences, Chennai, India, December 1-6.

325. Ketata C., Satish M.G. and Islam M.R., 2005. Testing an Expert System for Laser Drilling

in the Oil and Gas Industry, IAWTIC ‘05 Proceedings, International Conference on Intelligent Agents, Web Technology and Internet Commerce, Vienna, Austria, November 28-30.

326. Ketata C., Satish M.G. and Islam M.R., 2005. Expert System Knowledge Management for

Laser Drilling in the Oil and Gas Industry, IAWTIC ‘05 Proceedings, International Conference on Intelligent Agents, Web Technology and Internet Commerce, Vienna, Austria, November 28-30.

327. Ketata C., Satish M.G. and Islam M.R., 2005. Knowledge Selection for Laser Drilling in the

Oil and Gas Industry, IAWTIC ‘05 Proceedings, International Conference on Intelligent Agents, Web Technology and Internet Commerce, Vienna, Austria, November 28-30.

328. Kumar S.S., M.R. Islam and F. Taheri, Neuro-Fuzzy Approach for Damage Detection and

27

Suggestive Repair Mechanism, In the proceedings of 2005 International Conference on Computational & Experimental engineering & Science, 1-6 December 2005, Hyderabad, India.

329. Kumar S.S., F. Taheri and M.R. Islam Artificial Intelligence and Image Processing

Approaches in Damage Assessment and Material Evaluation, In the proceedings of International Conference on Computational Intelligence for Modelling Control and Automation - CIMCA'2005, 28 - 30 November 2005, Vienna – Austria.

330. Khan, M.I, and Islam, M.R., 2005. A Novel Sustainability Criterion as Applied in

Developing Technologies and Management Tools. Sustainable Planning 2005, 12 - 14 September 2005, Bologna, Italy.

331. Mustafiz, S., Belhaj, H., Ma, F. and Islam, M.R. (2005) A New Two Phase Extension of

Modified Brinkman Formulation for Fluid Flow through Porous Media, ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, Florida, USA, November.

332. Bjorndalen, N., Mustafiz, S. and Islam, M.R. (2005) The Effect of Irradiation on

Immiscible Fluids for Increased Oil Production with Horizontal Wells, ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, Florida, USA, November.

333. Satish, M., Ma, F.X. and Islam, M.R. (2005) Experimental and Numerical Modeling of a

Thermal Jet, ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, Florida, USA, November.

334. Mustafiz, S., Belhaj, H., Ma, F., Satish, M., Islam, M.R., 2005, Modeling Horizontal Well

Oil Production Using Modified Brinkman’s Model, ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, Florida, USA, November.

335. Khan, M.I., and Islam, M.R., 2005, Assessing the Sustainability of Technological

Developments: An Alternative Approach of Selecting Indicators in the Case of Offshore Operations, ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, Florida, USA, November.

336. Rahbar, S., Khan, M.M., Satish, M., Ma, F., and Islam, M.R., 2005, Experimental &

numerical studies on natural insulation materials, ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, Florida, USA, November.

337. Lakhal, S. Y., H'mida, S., and Islam, R. (2005). A Green Supply Chain for a Petroleum

Company, Proceedings of 35th International. Conference on Computer and Industrial Engineering, Istanbul, Turkey (June 19-21, 2005), 2, 1273-1280.

338. Mustafiz, S. and Islam, M.R. (2005) Formulation of Two-Phase, Two-Dimensional Non-Linear PDE’s as Applied in Well Testing, Proceeding of the Canadian Society for Civil

28

Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

339. Mustafiz, S., Biazar, J. and Islam, M.R. (2005) An Adomian Decomposition Solution to the Modified Brinkman Model (MBM) for a 2-Dimensional, 1-Phase Flow of Petroleum Fluids, Proceeding of the Canadian Society for Civil Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

340. Islam, M.R. And Zatzman, G.M. (2005) A New Energy Pricing Model: The Escalating

Failure of Neoclassical Economic Models and some Possible Implications for Future Relations between the Dollar and the Euro, Proceeding of the Canadian Society for Civil Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

341. Khan, M. I. and Islam, M.R. (2005) Assessing the Environmental Fate and Behavior of Oil

Discharges in the Marine Ecosystem using the Fugacity Model, Proceeding of the Canadian Society for Civil Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

342. Taheri, F., Prior, D., Vaziri, H. and Islam, M.R. Islam (2005) A Novel Petroleum Well

Completing Technique, Proceeding of the Canadian Society for Civil Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

343. Rahman, M.A., Biazar, J., Koksal, M. and Islam, M.R. (2005) Numerical and Experimental

Investigation of a Novel Perforation Technique in Petroleum Wells – Perforation by Drilling, Proceeding of the Canadian Society for Civil Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

344. Khan, M.M., Prior, D. and Islam, M. R. (2005) Direct-Usage Solar Refrigeration: From

Irreversible Thermodynamics to Sustainable Engineering, Proceeding of the Canadian Society for Civil Engineering (CSCE), 33rd Annual Conference, Toronto, ON, Canada, June 2-4.

345. Mustafiz, S. and Islam, M. R. (2005) Adomian Decomposition of Two-Phase, Two-

Dimensional Non-Linear PDEs as Applied in Well Testing, Proceedings of 4th International Conference on Computational Heat and Mass Transfer (Ed. R. Bennacer), Paris-Cachan, May 17-20, 1353-1356..

346. Bokhari, K. and Islam, M.R. (2005) Numerical Modeling of Viscous Fingering under

Combined Effects of Thermal, Solutal and Mixed Convection in Liquid-Liquid Miscible Displacements, Proceedings of 4th International Conference on Computational Heat and Mass Transfer, Paris-Cachan, May 17-20, pp. 782-787.

347. Al-Darbi, K.R. Agha, and Islam, M.R. (2005), Numerical Modeling of the SRB-Influenced

Pitting Biocorrosion, Proceedings of 4th International Conference on Computational Heat and Mass Transfer, Paris-Cachan, May 17-20, pp. 1029-1031.

348. Khan, M.I. and Islam, M.R., 2005. Sustainable Marine Resources Management: Framework

for Environmental Sustainability in Offshore Oil and Gas Operations. Fifth International

29

Conference on Ecosystems and Sustainable Development. Cadiz, Spain, May 03-05, 2005.

349. Al-Darbi, M., Agha, K., and Islam, M.R., Modeling and simulation of the pitting microbiologically influenced corrosion in different industrial systems, Corrosion 2005, NACE Conf., Houston, April 3-7.

350. Taheri, F., Prior, D., Vaziri, H., and Islam, M.R., 2005, “A novel petroleum well

completion technique”, Proc. Fifth International Conference on Composite Science and Technology, Al-Tamimi, El-Kady, H., Ibrahim, T., and Qaddoumi, N. (eds.), Sharjah UAE, Feb., 2005.

351. Zatzman, G. and Islam, M.R., "A New Energy Pricing Model", Third International

Conference on Energy Research & Development (ICERD-3), Kuwait City, Nov., 2005.

352. Mills, A. and Islam, M.R., "Novel High Temperature Gas Reactors", Third International Conference on Energy Research & Development (ICERD-3), Kuwait City, Nov., 2005.

353. Khan M.I., and Islam, M.R., "Assessing the Environmental Fate and Behavior of Oil

Discharges in the Marine Ecosystem using the Fugacity Model", Third International Conference on Energy Research & Development (ICERD-3), Kuwait City, Nov., 2005.

354. Mustafiz, S., Biazar, J. and Islam, M.R., "The Adomian Solution of Modified Brinkman

Model to Describe Porous Media Flow", Third International Conference on Energy Research & Development (ICERD-3), Kuwait City, Nov., 2005.

355. Al-Darbi, M. M., K. Agha and M. R. Islam. Modeling and Simulation of the Pitting

Microbiologically Influenced Corrosion in Different Industrial Systems. Submitted (October 2004) for publication in the NACE CORROSION/2005 Conference Proceedings. Houston, Texas, USA. April 3–7, 2005.

356. M.R. Islam, 2004, “The Virtues of Virtual Universities”, Proc. First International

Conference on Innovation in Learning for the Future: e-Learning, Istanbul, (M. Yalvac and S. Gulsecen, eds.), 19-34. (Guest speech)

357. S.P. Panawalage, M. Rahman, and M.R. Islam, “The Inverse Problem in Well

Permeability”, Proc. 6th WSEAS Int. Conf. Applied Math., Corfu Island, Greece, 2004.

358. M.I. Khan and M.R. Islam, 2003, “Wastes Management in Offshore Oil and Gas: A Major Challenge in Integrated Coastal Zone Management”, Proc. Integrated Coastal Zone Management Conference, Santiago, Cuba, May.

359. N. Bjorndalen, K.R. Agha, M.R. Islam, 2003, “Numerical and Experimental Study Of

Double Diffusive Phenomena Under Microwave Irradiation”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

360. S. Mustafiz, N. Bjorndalen, A. Basu, K. Lee and M.R. Islam, 2003, “A New Technique For

30

The Remediation Of Oil Spills From Ice Infested Waters”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

361. M.M. Al-Darbi, N.O. Saeed, R.G. Ackman, K. Lee, and M.R. Islam, 2002, “Vegetable And

Animal Oils Degradation In Marine Environments”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

362. R. Henda, A. Hermas, R. Gedye and R. Islam,, 2003, “Effect of Microwave Radiation on the

Grindability and Floatability of Nickel-Copper Ore”, 38th Annual Microwave Symposium Proceedings.

363. P.K. Frempong, S. Butt R. Islam , 2003, “Linking Acoustic And Mechanical Properties Of

Materials With Particular Reference To Reservoir Rocks: A Critical Literature Review”, Proc. Oil and Gas Symposium,CSCE Annual Conference, refereed proceeding, Moncton, June.

364. N.O. Saeed, L.O. Ajijolaiya, M.M. Al-Darbi and M.R. Islam, 2003, “Mechanical Properties

of Mortar Reinforced With Hair Fibre”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

365. M.A. Rahman, M. Koksal, M.R. Islam, 2003, “Nature of Formation Damage Around

Perforations In Petroleum Wells”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

366. K.R., Agha, H. Belhaj And M.R. Islam, 2003, “Transient Thermal Deformations of Rocks

During Laser Drilling”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

367. M.S. Rahaman, A. Basu, M.H. Rahman, M.S.A. Tango & M.R. Islam, 2003, “Comparative

Studies of Arsenic Adsorption on Natural Materials”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

368. A. Nouri, A. Donald, P. Frempong, S. Butt, H. Vaziri, M.R. Islam, 2003, “Using Acoustic

Measurements in Evaluating Pore Collapse Occurrence and Associated Sand Production”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

369. H.A. Belhaj, K.R. Agha, S.D. Butt and M.R. Islam, 2003, “Numerical and Experimental

Determination of the Non-Darcy Coefficient”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

370. N.O. Saeed, M.M. Al-Darbi, and M.R. Islam, “Antibacterial Effects of Natural Materials

On Shewanella Puterfaciens”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

371. A.Nouri, A.Komak Panah,A. Pak, M., H. Vaziri, and M.R. Islam, “Numerical Evaluation of

Hydraulic Fracturing Experiments”, Proc. Oil and Gas Symposium, CSCE Annual Conference, refereed proceeding, Moncton, June.

31

372. M. AlDarbi, Islam, M.R., et al., Protection of Mild Steel Against Corrosion Using Mixed

Inhibitor Combination, Proc. NACE Annual Conf., Denver, CO, April 2002.

373. Z. AlMuntasser, Islam, M.R., et al., Coating Performance Under Marine Environment, Proc. NACE Annual Conf., Denver, CO, April 2002.

374. Z. AlMuntasser, Islam, M.R., et al., Prevention of Microbiologically Influenced Corrosion

using Zinc Coatings”, Proc. NACE Annual Conf., Denver, CO, April 2002.

375. Saghir, M.Z. and Islam, M.R., 2000, “Transient Convection Flow in Super-imposed fluid and porous layers”, Proc. Int. The 30th International Conference on Environmental Systems (ICES) and 7th European Symposium on Space Environmental Control Systems, Toulouse, France.

376. Saghir, M.Z., Vaziri, H., and Islam, M.R., 2000, “Viscous Fingering in a Rotating Porous

Medium”, Proceeding of the Fourth International Workshop on Material Processing at High Gravity, L.L. Regel and W.R. Wilcock, eds., Portdam, NY.

377. Malik, Q.M. and Islam, M.R., 2000, “Potential of Greenhouse Gas Storage and Utilization

Through Enhanced Oil Recovery in Canada”, World Petroleum Congress, Calgary, June.

378. Aboudheir, A., Kocabas, I. and Islam, M.R., 1999, “Improvement of Numerical Methods in Petroleum Engineering Problems”, Applied Modelling and Simulation - IASTED International

Conference, Sept. 1-3, Cairns, Australia. 379. Islam, M.R. and Saghir, M.Z., 1998, “Comprehensive Numerical Simulation of a

Desalination Plant”, CHT’97 Advances in Computational Heat Transfer, de Vahl Davis, G. and Leonardi, E. eds,, 111-118.

380. Saghir, M.Z., Hennenberg, M., and Legros, J.C., Islam, M.R., 1998, “Rayleigh-Marangoni

Convection in a Porous Cavity", CHT’97 Advances in Computational Heat Transfer, de Vahl Davis, G. and Leonardi, E. eds., 591-602.

381. Saghir, M.Z., Hennenberg, M., Legros, J.C., and Islam, M.R., 1998, “Interactions between

the Marangoni and Intrusion Forces in A Multi-Cavity System”, CHT’97 Advances in Computational Heat Transfer, de Vahl Davis, G. and Leonardi, E. eds,, 345-353.

382. Kanakamedala, R. and Islam, M.R., 1995, "A New Method of Petroleum Sludge Disposal

and Utilization", Proc. Sixth UNITAR International Conference on Heavy Crude and Tar Sands, R.F. Meyer (ed.), vol. 2, 675-682.

383. Song, F.Y. and Islam, M.R., 1995, "Multicomponent Adsorption in EOR Applications",

Proc. Sixth UNITAR International Conference on Heavy Crude and Tar Sands, R.F. Meyer (ed.), vol. 1, 787-794.

32

384. Carter, J. and Islam, M.R., 1993, "Thermal and Concentration Induced Instability in Porous Media", Ninth Proc. Nuclear Thermal Hydraulics, 1993 Winter Meeting, San Francisco, CA, 157-167; also published in the Trans. American Nuclear Society, 1993.

385. Islam, M.R. and Chakma, A., 1991, "Prospects of Electromagnetic Heating for Recovering

Heavy Oil with Horizontal Wells", Proc. World Petroleum Congress, Buenos Aires, Argentina.

386. Islam, M.R., Wadadar, S., Bansal, A., 1991, "Conventional and Hot Waterflood for

Recovering Heavy Oil from Alaskan Reservoirs", Heavy Crude and Tar Sands - Hydrocarbons for the 21st Century, vol. 2, p. 133, UNITAR/UNDP, 1991.

387. Islam, M.R., Mbride, M., and Chakma, A., and Islam, M.R., 1991, "Numerical

"Numerical Simulation of a Novel Recovery Technique for Heavy Oil Reservoirs with Bottomwater", Heavy Crude and Tar Sands - Hydrocarbons for the 21st Century, vol. 4, UNITAR/UNDP, 1991.

388. Islam, M.R., Verma. A., and Farouq Ali, S.M., 1991, "In Situ Combustion - The Essential

Reaction Kinetics", Heavy Crude and Tar Sands - Hydrocarbons for the 21st Century, vol. 4, UNITAR/UNDP.

389. Islam, M.R., Berruti, F., and Chakma, A., 1989, "Numerical Study of Three-Phase Flow in

a Horizontal Pipe", Proceeding of the Int. Gas Res. Conf., Tokyo, Japan, 1989.

390. Chakma, A., Chornet, E., and Islam, M.R., 1989, "Numerical Simulation of High Efficiency Jet Absorbers", Proc. of the Int. Gas Research Conf., Tokyo, Japan.

391. Islam, M.R. and Farouq Ali, S.M., 1989, "State-of-the-Art of Chemical Injection

Modelling", Proc. of the Chemeca 89, Queensland, Australia.

392. Islam, M.R. and Chakma, A., and Farouq Ali, S.M., 1989, "A Novel Ultra Pure Gas Absorption Technique", Proc. of the Chemeca 89, Queensland, Australia.

393. Islam, M.R. and Farouq Ali, S.M., 1989, "An Experimental and Numerical Study of

Blockage of a Mobile Water Zone by an Emulsion", vol. 4, p. 303, Proceeding of the UNITAR/UNDP 4th Int. Conf. on Heavy Crude & Tar Sands, held in Edmonton, Canada, 1988, refereed version published in 1989.

394. Islam, M.R. and Farouq Ali, 1989, "Numerical Simulation of Alkaline/Co-

surfactant/Polymer Flooding", vol. 4, p.445, Proceeding of the UNITAR/UNDP 4th Int. Conf. on Heavy Crude & Tar Sands, held in Edmonton, August 7-12, 1988.

Book Reviews

395. Ketata, C. and Islam, M.R., Book Review, Geology and Geochemistry of Oil and Gas

(Developments in Petroleum Science, Volume 52) by G. V. Chilingar, L. A. Buryakovsky, N.

33

A. Eremenko, and M. V. Gorfunkel, Elsevier B.V., Amsterdam, The Netherlands, 390 pp., published in 2008 in Pet. Sci. Tech., Energy Sources Part A, Energy Sources, Part B

396. Ketata C. and Islam M.R., 2006. Probability in Petroleum and Environmental Engineering

by G. V. Chilingar, L. F. Khilyuk, and H. H. Rieke, Gulf Publishing Company, book review, J. Pet. Sci. Tech, 749-750.

397. Mustafiz, S., and Islam, M.R., Book Review on Natural Gas Hydrates: A guide for Engineers Author: John Carroll, ISBN: 0-7506-7569-1, Gulf Professional Publishing (GPP), Elsevier Science (USA), 7569-1, 270 pp., Ocean Resources, Oct., 45-47, 2003.

398. Kattanah, Y.A., and Islam, M.R., Book Review on Petroleum Geology of the South Caspian

Basin, L.A. Buryakovsky, G.V. Chliningar, and Aminzadeh, Gulf Publishing, 2001, Energy Sources, vol. 25, 1113-1117, 2003.

399. Kattanah, Y.A., and Islam, M.R., Book Review on Origin and Prediction of Abnormal Formation Pressures, G.V. Chilingar, V.A. Serebryakov, J.O. Robertson (eds), Elsevier, 2002, Energy Sources, vol. 25, 1119-1124, 2003.

400. Islam, M.R., 2001, Book Review on Gas Migration and Events Preceding Earthquakes by Khilyuk, L.F., Chilingar, G.V., Robertson, J.O., Jr., and Endres, B., 2000, Gulf Publishing Co., J. Pet. Sci. Eng., vol. 29 (1), 83-84.

401. Islam, M.R., 1999, Book Review on Environmental Chemistry by T.F. Yen, Prentice Hall, J. Pet. Sci. Eng., vol. 23/3-4, 241-243.

402. Islam, M.R., 1996, Book Review of Flow and Transport in Porous Media and Fractured Rock by M. Sahimi, J. Petroleum Science and Engineering, October.

403. Siddiqui, S., Saleh, S.T., and Islam, M.R., 1996, Book Review of Casing Design: Theory

and Practice by S. S. Rahman and G. V. Chilingarian, J. Petroleum Science and Engineering, December.

Invited, key-note, and panel speeches

404. “A comprehensive mass balance equation and its implications in evaluating nanomaterial

properties”, invited paper, ICCE-16, 16th Annual Int. Conf. on Composites/Nano Engineering, Kumming, China, July 20-26, 2008.

405. “Towards Developing Sustainable Enhanced Oil Recovery Schemes”, SPE EOR Conference, Oman, April 21-24, 2008.

406. “Without the science of intangibles, the earth is still flat”, Invited speech, The Second International Symposium on Nonlinear Dynamics, 27-30 Oct., 2007, Shanghai, China

34

407. “Emulating Nature in the Information Age”, 59th Annual Congress of the Indian Institute of

Chemical Engineers, Keynote Speech, Ankleshwar, India, Dec., 2006.

408. “A Knowledge-Based Water and Wastewater Management Model”. Keynote Speech for

Conference on Management of Water, Wastewater and Environment: Challenges for the Developing Countries. September, 13-15, 2006, Kathmandu, Nepal

409. “Role of Intention on Technology Development”, Invited speech, 2nd International

Conference on Appropriate Technology , July 12-14, Zimbabwe, 2006.

410. “Computing for the Information Age”, Keynote speech, 36th International Conference on Computers and Industrial Engineering, Taiwan, June, 2006.

411. “Energy Crunch: What more lies ahead?” The Dialogue: Global Dialogue on Natural

Resources, Center for International and Strategic Studies, Washington DC, April 3-4, 2006.

412. “Knowledge-Based Technologies for the Information Age”, Keynote speech, Proc. of the International Chemical Engineering Conference, Amman, Jordan, Sept. 12-14, 2005.

413. “Reservoir Management in the Information Age”, Latin American Geological Congress,

Quito, Ecuador, May, 2005.

414. “Knowledge-based technology development through virtual universities”, E-transformation in learning, Istanbul, Turkey, April 2005.

415. “Unraveling the mysteries of chaos and change: The Knowledge-based technology

development”, Invited speech, Joint Session of Fifth International Conference on Composite Science and Technology and First International Conference on Modeling, Simulation and Applied Optimization, Sharjah, UAE, February, 2005.

416. “The Virtues of Virtual Universities”, Guest Speech, First International Conference on

Innovation in Learning for the Future: e-Learning, Istanbul, October, 2004.

417. “A New Curriculum for the Information Age”, Keynote Speech, International Engineering Conference, Jordan, April, 2004.

418. “A New Energy Pricing Modeling”, Guest Speech, MPC-2004, Tripoli, January, 2004.

419. “Revolution in Education: Can One University Make a Difference?”, Guest Speech,

Manarat International University, August 17, 2003, Dhaka.

420. “Revolution in Education: Can One University Make a Difference?”, Guest Speech, Shanto-Mariam University of Creative Technology, August 14, 2003, Dhaka.

35

421. “Adding value to Atlantic Canada’s offshore industry”, invited speech, Offshore Energy Forum, Halifax, April 11, 2003.

422. “The Framework of World’s first EEC Education Initiatives”, Guest Speech, BUET, Dhaka,

Dec., 2002.

423. “Five Golden Rules for Economic Development in the Information Age”, Engineering Institution, Dhaka Centre Special Seminar, Dhaka, Jan. 2, 2003.

424. “World’s first Energy, Environment and Communication (EEC) Education Initiative”,

BUET Special Workshop, Dhaka, Dec. 31, 2002.

425. “Petroleum Engineering Education in the Information Age”, SPE Dinner Speech, Nov. 3, 2002, Islamabad.

426. “Future of Petroleum Engineering: Excelling in the Information Age”, Inaugural Seminar

on Petroleum Engineering Seminar Series, Dalhousie University, Sept. 18, 2002.

427. “Energy, Environment, and Communication in the Information Age”, Panel on Information Technology in Energy, Softworld-2002, Charlottetown, Prince Edward Island, Canada, Sept. 9, 2002.

428. “A Clean Environment and a Good Life – Can we have both on the same plate?” NDP

Panel on Revitalizing Democracy, Halifax, July 5, 2002.

429. “Top 10 Misconceptions in Research and Economic Development”, Keynote Speech, MPC-02, Seventh Mediterranean Petroleum Conference, Tripoli, Libya.

430. “Future of Petroleum Research”, Seventh Mediterranean Petroleum Conference, Keynote

Speech, MPC-02, Tripoli, Libya.

431. “Top 10 Misconceptions in Research and Economic Development”, Keynote Speech, ICME-2001, International Conference in Mechanical Engineering, Dec., 2001, Dhaka, Bangladesh.

432. “International Opportunities in Collaborative Research”, BUET, Bangladesh, July 2001.

433. “Research and Education: A guideline for prosperity of developing countries”, BUET,

Bangladesh, July 2001.

434. “Future of Petroleum Research: How can we shape it?”, CIM Distinguished lecture, Sydney, Nova Scotia, Aug., 2001.

435. “Past, Present, and Future of the Petroleum Engineering Research”, Joint Geotechnical

Society/CIM Seminar, Halifax, March, 2001.

36

436. “Emerging Technologies in Oil Reservoir Monitoring Systems”, SPE Technical Dinner Meeting, Islamabad, Jan., 2001.

437. “Emerging Technologies in Oil Reservoir Monitoring Systems”, Keynote speech,

International Conference on Instrumentation, Boumerdes, Algeria, Oct. 23-24, 2000.

438. “Emerging Technologies in Oil Reservoir Monitoring Systems”, Keynote speech, International Symposium on Well Logging, Tripoli, Libya, Oct. 29-31, 2000.

439. “Petroleum Research in the Atlantic Region: Opportunities for Interdisciplinary

Collaboration?”, Distinguished Lecture, Dept. of Geosciences, Dalhousie University, April, 2000.

440. “Research Opportunities in Petroleum Engineering: The role of the government and the

industry”, Keynote speech, Sixth Mediterranean Petroleum Conference and Exhibition, Tripoli, Nov., 1999.

441. “Microgravity Research Opportunities in Petroleum Engineering”, CSA Workshop on Oil

Recovery, Montreal, June.

442. Islam, M.R., 1999, “The Role of Pressure Drop in Production with Horizontal Wells”, 7th International Willston Basin Horizontal Well Workshop, April 25-27, Regina.

443. Islam, M.R., 1998, “Engineering Research in Affluent Arab Countries: Opportunities and

the Psyche”, 2nd International non-Renewable Energy Sources Congress, Tehran, Dec.

444. Islam, M.R., 1998, "Engineering Education in the 21st Century: Challenges and Opportunities", 2nd International non-Renewable Energy Sources Congress, Tehran, Dec.

445. Islam, M.R., 1998, "Research in Affluent Developing Countries", Luncheon Speech, 3rd

International Conference on Solar Electricity, Sharjah, UAE, March, 1998.

446. Islam, M.R., 1995, "Emerging Technologies in Enhanced Oil Recovery", Key-note Speech, International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Section, Al-Ain, U.A.E., December.

447. Islam, M.R., 1995, "Future Trends in Petroleum Engineering Research", Academy of Oil

and Gas, Moscow, Russian Federation, July.

448. Islam, M.R., 1995, "Coupling Wellbore Models with a Reservoir Model: Horizontal Well Applications", SPE Forum Series on Horizontal Wells, July.

449. Islam, M.R., 1995, "Numerical Simulation and Applications of Asphaltenes in Heavy Oil",

Invited paper, International Symposium on Asphaltene and Macromolecular Phenomena in Petroleum Production, Transportation and Processing, Fine Particles Society Annual Conference, Chicago, IL, Aug.

37

450. Islam, M.R. and Sundaram, N.S., 1994, "Field Evaluation of a New Technique for In Situ

Remediation of Petroleum-Contaminated Soils", Air and Waste Management Association 87th Annual Meeting and Exhibition, Cincinnati.

451. Islam, M.R., 1993, "Novel Techniques for Recovering Heavy Oil", International Non-

Renewable Energy Sources Congress, Tehran, Dec.

452. Islam, M.R., 1992, "Route to Chaos in Thermal Convection in Porous Media", Dept. of Mechanical Eng., University of Hawaii at Manoa.

453. Islam, M.R., 1992, "A Novel Technique for In Situ Remediation of Petroleum

Contaminants", Dept. of Civil Eng., University of Hawaii at Manoa, Sept.

454. Islam, M.R., 1991, "Numerical Simulation of a Horizontal Well with Rigorous Treatment of Wellbore Dynamics", Texaco, Houston, Oct.

455. Islam, M.R., Chakma, A., Nandakumar, K., 1990, "Flow Instability in Chemically

Enhanced Thermal Convection in Porous Medium", Invited speaker, Joint IIChE and CSChE Conference on Advances in Chemical Engineering, held in Vernasi.

456. Islam, M.R., 1990, "Scaled Model Studies and Numerical Simulation of Thermal EOR",

Pennsylvania State University, Nov.

457. Islam, M.R., 1990, "Scaled Model Studies and Numerical Simulation of Chemical EOR", University of Tulsa, May.

458. Islam, M.R., 1990, "Unraveling the Mysteries of Chemical Flooding", Mobil Research,

Dallas, Aug.

459. Islam, M.R., and Berruti, F., 1990, "Prospects of Microbial EOR in Heavy Oil Reservoirs", Invited speaker, SPE Forum Series, Crested Butte, CO, Aug.

460. Islam, M.R., and Chakma, A., 1990, "A Novel Recovery Technique for Producing Heavy

Oil Reservoirs Containing Bottom Water", Invited speaker, SPE Forum Series, Crested Butte, CO, Aug.

461. Islam, M.R., 1990, "Mathematical Modelling of Multiphase in a Horizontal Well

Incorporating Flow Through Perforations", Invited speaker, SPE Forum Series in Europe, Grindelwald, Switzerland, Sep. 16-21.

462. Islam, M.R., 1990, "Experimental and Physical Modelling of Horizontal Wells", Invited

speaker, Husky Oil, 1/2-day seminar, March 22.

463. Islam, M.R. and Schmid, R., 1990, "Scaled Model Studies of Horizontal Wells in Heavy Oil Reservoirs", CANMET Review Meeting, Calgary, Feb.22-23.

38

464. Islam, M.R., Ferris, G. and Stehmeier, L., 1990, "Field Test and Mathematical Modelling of

a Microbial Plugging System at Standard Hill, Saskatchewan", CANMET Review Meeting, Calgary, Feb.22-23.

465. Islam, M.R., 1989, “Unraveling the Mysteries of Chemical Flooding”, University of

California Berkeley, April.

466. Islam, M.R., 1989, "Fluid Flow and Sand Control in Horizontal well: Experimental and Numerical Study", Invited speaker, SPE Forum Series, Mt. Crested Butte, Colorado, USA, July, 1989.

467. Islam, M.R., 1989, "Theoretical Aspect of Horizontal Well Sand Control", Jan., CIM

Special Interest Group of Geomechanics.

468. Islam, M.R., 1988, "Sand Control in Horizontal Wells in Heavy Oil Reservoirs", Dec., CIM Saskatchewan Division.

469. Islam, M.R., 1988, "Improving Waterfloods with Emulsion Slugs: Experimental and

Theoretical Study", Alberta Energy, Mines, and Resources, Devon, AB, Feb.

470. Islam, M.R. and Farouq Ali, S.M., 1988, "Emulsion Slugs for Improved Waterfloods - An Experimental and Theoretical Study", 7th Int. Symp. on Surfactants in Solution, Ottawa, Oct.

471. Islam, M.R., 1987, "Scaling Criteria for EOR Processes", Petroleum Recovery Institute,

(1/2-day seminar), Nov. Islam, M.R., 1986, “Mobility Control in Waterflooding Oil Reservoirs with a Bottom-Water Zone”, Alberta Research Council, Edmonton, Feb.

NON-REFEREED CONFERENCE PROCEEDINGS AND PUBLICATIONS

472. Chhetri, A.B., Adhikari, B.H. and Islam, M.R., 2006. Increasing Water Demand and Groundwater Contamination. International Conference on Management of Water, Wastewater and Environment: Challenges for the Developing Countries. September, 13-15, 2006, Kathmandu , Nepal.

473. Khan, M.I., and Islam, M.R., 2006. "Alternative Management and Mitigation for Potential

Impacts of Oil and Gas Operations in the World's Largest and Most Productive Ecologically Sensitive Site", SPE-103269, SPE Annual Technical Conference & Exhibition, Sept., San Antonio, TX.

474. H. Mousavizadegan, F. Ma, M.R. Islam, 2006, “Three-Dimensional Permeability Using

Liquid Injection”, SPE paper no. 100428, SPE Western Regional Meeting/AAPG - Pacific Section/GSA, May 8-10, Anchorage, Alaska.

39

475. H. Mousavizadegan, F. Ma, M.R. Islam, 2006, “Three-Dimensional Permeability Utilizing

a New Gas-Spot Permeameter", SPE paper no. 100427, Gas Technology Symposium, May 15-18, Calgary.

476. Khan, M.I. and Islam, M.R., 2005. Achieving True Technological Sustainability: Pathway

Analysis of A Sustainable and an Unsustainable Product, Indian Chemical and Sustainable Conference, December 21-23, 2005.

477. Khan, M.I., Zatzman, G.M., And Islam, M.R., 2005, “A Novel Sustainability Criterion as

Applied in Developing Technologies and Management Tools”, Jordan International Chemical Engineering Conference V (Jicec05), 12-15 September 2005, Amman, Jordan.

478. Khan, M.M., A. R. Mills1, M.Y. Mehedi, O. Chaalal, and M.R. Islam, 2005,

“Bioabsorbents for the removal of heavy metals from aqueous streams”. Jordan International Chemical Engineering Conference V (Jicec05), 12-15 September 2005, Amman, Jordan.

479. Khan, M.M, D. Prior, and M. R. Islam, 2005, “Direct- usage solar refrigeration: from

irreversible thermodynamics to sustainable engineering”, Jordan International Chemical Engineering Conference V (Jicec05), 12-15 September 2005, Amman, Jordan.

480. Prior , D., M.M. Khan, M.R. Islam, F. Taheri, 2005, “A novel oil-spill cleanup barge”,

Jordan International Chemical Engineering Conference V (Jicec05), 12-15 September 2005, Amman, Jordan.

481. Khan, M.M, D. Prior, and M. R. Islam, 2005, “Zero-waste living with inherently sustainable

technologies”, Jordan International Chemical Engineering Conference V (Jicec05), 12-15 September 2005, Amman, Jordan.

482. Khan, M.M, D. Prior, and M. R. Islam, 2005, “Environment- friendly wood panels for

healthy homes”, Jordan International Chemical Engineering Conference V (Jicec05), 12-15 September 2005, Amman, Jordan.

483. Al-Darbi, M., Agha, K.R., and Islam, M.R., 2004, “Modeling Pitting-Corrosion”, Proc.

International Chemical Engineering Conference, Amman, Jordan, 12 - 14 September.

484. Satish, M., Ma, F., and Islam, M.R., 2005, ”A 3D turbulence model for sedimentation in open channel flow”, ICORM, Guang-Zhou, China, Sept. 17-20.

485. Nouri, A., Vaziri, H., Kuru, E., and Islam, M.R., 2005, “Sand Production Prediction in Oil

Wellbores: A Set of Criteria for Design of Reticulated Expandable Completion Techniques Based on Large-Scale Transient Experiments”, Calgary International Petroleum Conference and Exhibition, Calgary, June.

486. Khan, M.I. and Islam, M.R., 2005. Participatory Offshore Oil and Gas Operations: An

Alternative Sustainable Management Approach., CARICOSTA 2005 – Second International

40

Conference on Integrated Coastal Zone Management ICZM, University of Oriente, Santiago du Cuba, May 11-13, 2005.

487. Mustafiz, S., Biazar, J. and Islam, M.R., “An Adomian Decomposition Solution to the

Modified Brinkman Model (MBM) for a 2-Dimensional, 1-Phase Flow of Petroleum Fluids”, First International Conference on Modeling, Simulation and Applied Optimization, February, 2005.

488. K. Bokhari and M.R. Islam, “Numerical Modeling of Viscous Fingering under Combined

Effects of Thermal, Solutal and Mixed Convection in Liquid-Liquid Miscible Displacements, First International Conference on Modeling, Simulation and Applied Optimization, February, 2005.

489. M.A. Rahman, J. Biazar, M. Koksal ,and M.R. Islam, 2005, “Numerical and Experimental

Investigation of a Novel Perforation Technique in Petroleum Wells - Perforation by Drilling, First International Conference on Modeling, Simulation and Applied Optimization, February, 2005.

490. Mustafiz, S., Agha, K.R. and Islam, M.R.,“Numerical Solutions to Two-Phase, Two-

Dimensional Non-Linear PDE’s as Applied in Oil Well Testing”, First International Conference on Modeling, Simulation and Applied Optimization, February, 2005.

491. M. M. Al-Darbi, K. Agha and M. R. Islam, “Comprehensive Modeling of the Pitting

Biocorrosion of Steel ”, First International Conference on Modeling, Simulation and Applied Optimization, February, 2005.

492. A. Nouri, H. Belhaj, H. Vaziri, M.R. Islam, “Sand Production Prediction: A New Set of

Criteria for Modeling Based on Large-Scale Transient Experiments and Numerical Investigation”, SPE 90273, SPE Annual Technical Conference and Exhibition, Oct., 2004.

493. M. AlDarbi, K.R. Agha, R. Hoda, and M.R. Islam, “A Novel Method for Preventing

Corrosion”, Int. Eng. Conf., Jordan, April, 2004.

494. M. AlDarbi, K.R. Agha, and M.R. Islam, “Natural Additives for Corrosion Prevention”, Int. Eng. Conf., Jordan, April, 2004.

495. K. Bokhari and M.R. Islam, “Experimental and Numerical Modeling of Double Diffusive

Convection Under non-Isothermal Conditions”, Int. Conf. Therm. Eng., Beirut, May, 2004.

496. Belhaj, H.A., Biazar, J., Butt, S.D. and Islam, M.R.: “Adomian Solution of Modified Brinkman Model to Describe Porous Media Flow,” paper SPE 89426 presented at the SPE/DOE Fourteenth Symposium on Improved Oil Recovery, Tulsa, Oklahoma, USA, April 17-21, 2004.

497. Al-Darbi, M. M., K. Agha and M. R. Islam. 2004. Modeling Substrate Concentrations and

Biofilm Growth in Pipeline Systems. International Conference on Thermal Engineering:

41

Theory and Application. Beirut, Lebanon. Paper No. ICTEA-MS1-06.

498. Khan, M.I, and Islam, M.R., 2004. Management Based on Environmental Carrying Capacity: An Innovative Approach in Coastal Zone Management. Coastal Zone Canada 2004, St. John's, Newfoundland, Canada, June 27-30, 2004.

499. Belhaj, H.A., Agha, K.R, Nouri, A.M., Butt, S.D., Islam, M.R. and Vaziri, H.H.:

“Numerical Modeling of Forchheimer’s Equation to Describe Darcy and Non-Darcy Flow in Porous Medium System,” paper SPE 80440, proc., SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, April 15-17, 2003.

500. Belhaj, H.A., Agha, K.R, Nouri, A.M., Butt, S.D., Vaziri, H.F. and Islam, M.R.:

“Numerical Simulation of Non-Darcy Flow Utilizing the New Forchheimer’s Diffusivity Equation,” paper SPE 81499, proc., Middle East Oil Show, Bahrain, April 5-8, 2003.

501. Khan, M.I, and Islam, M.R., 2003. A Restoration Technique for Enclosed Coastal Seas:

Creation of Artifical Rigs, Fish Shelters, And Recreation Centers Through Utilizing Oil Rigs. Environmental Management of Enclosed Coastal Seas 2003, Bangkok, November 18-21, 2003.

502. Sandha, A., Agha, K.R., and Islam, M.R., “On the Development of Expert System for Laser

Drilling of Oil and Gas Wells", Proc. Joint Meeting of the International Conference on Computer, Communication and Control Technologies (CCCT '03) and the 9th International Conference on Information Systems Analysis and Synthesis (ISAS '03), to be held in Orlando, USA, from July 31 to August 2, 2003.

503. Khan, M.I, and Islam, M.R., 2003. Wastes Management in Offshore Oil and Gas: A Major

Challenge in Integrated Coastal Zone Management. In: L. G. Luna (ed), CARICOSTA 2003 - 1st International Conference on Integrated Coastal Zone Management ICZM, University of Oriente, Santiago du Cuba, May 5-7, 2003.

504. Ali, K., Ajijolaiya, L.O., Hill, P.S., K. Lee, and Islam, M.R., 2003, “The effect of sediment

size on OMA formation”, Proceedings of the 27th Arctic Marine Oil Spill Program (AMOP), Vancouver, BC, pages 383-397.

505. Al-Darbi, M. M., R. Hoda, K. Agha and M. R. Islam. 2004. Using Natural Products to

Enhance the Performance of Oil-Based-Coatings in Simulated Marine Environments. International Engineering Conference “Mutah 2004”. Karak, Jordan. Paper No. IEC04-137.

506. Hoda, R., M. M. Al-Darbi, K. Agha and M. R. Islam. 2004. Water-Based Protective-

Coatings Performance in Marine Environments With and Without the Addition of Natural Products. International Engineering Conference “Mutah 2004”. Karak, Jordan. Paper No. IEC04-136.

507. G. Zatzman and M.R. Islam, “Future of Petroleum Engineering Education and Training”,

MPC-2004, Tripoli, March, 2004.

42

508. M.R. Islam and G. Zatzman, “A New Energy Pricing Model”, MPC-2004, Tripoli, March, 2004.

509. N. Bjorndalen, S. Mustafiz, M.R. Islam, “A Zero-waste Oil and Gas Production Scheme”,

MPC-2004, Tripoli, March, 2004.

510. M. AlDarbi, K.R. Agha, M.R. Islam, “The Effect of Topography on Corrosion”, MPC-2004, Tripoli, March, 2004.

511. N. Bjorndalen, S. Mustafiz, K.R. Agha, M.R. Islam, “Numerical Modeling of Laser Drilling

of Petroleum Formations”, MPC-2004, Tripoli, March, 2004.

512. A. Nouri, H. Vaziri, M.R. Islam, “Comprehensive Transient Modeling of Sand Production in Horizontal Wellbores”, SPE 84500, SPE Annual Technical Conference and Exhibition, Denver, Oct., 2003.

513. Ajijolaiya, L.O., Hill, P.S., and Islam, M.R., 2003, “The effect of mineral grain sizes on

stabilization of spilled crude oil in estuarines”, Second international conference on chemistry and its applications, Qatar, Dec., 5-9.

514. M. I. Khan, and M.R. Islam, Ecosystem-Based Approach to Offshore Oil and Gas

Operation: An Alternative Environmental Management Technique, SPE 84058, SPE Annual Technical Conference and Exhibition, Denver, Oct., 2003.

515. A. Nouri, H. Vaziri, and M.R. Islam, 2003, “A Comprehensive Approach for Modeling

Sanding During Oil Production”, SPE paper no. 81032, Proc. of SPE Latin American & Caribbean Petroleum Engineering Conference, Port of Spain, April 27-30.

516. H. Belhaj, K. Agha, and M.R. Islam, 2003, Numerical Modeling of Forchheimer's Equation

to Describe Darcy and Non-Darcy Flow in Porous Medium System, SPE paper no. 81037, Proc. of SPE Latin American & Caribbean Petroleum Engineering Conference, Port of Spain, April 27-30.

517. Belhaj, H. K.R. Agha, A.M. Nouri, S.D. Butt, H.H. Vaziri, and M.R. Islam, Numerical

Modeling of Forchheimer’s Equation to Describe Darcy and Non-Darcy Flow in Porous Media, SPE Asia Pacific Oil and Gas Conference and Exhibition held in Jakarta, Indonesia, April 2003.

518. Belhaj, H. A., K.R. Agha, A.M. Nouri, S.D. Butt, W.J. Phillips and M.R. Islam, Numerical

and Experimental Modeling of Non-Darcy Flow in Porous Media, the SPE Latin American and Caribbean Petroleum Engineering Conference, Port-of-Spain, Trinidad, West Indies, April 2003.

519. Belhaj, H. K.R. Agha, A.M. Nouri, S.D. Butt, H.H. Vaziri, and M.R. Islam, Numerical

Simulation of Non-Darcy Flow Utilizing the New Forchheimer’s Diffusivity Equation, SPE 13th Middle East Oil Show & Conference, Bahrain, April 2003.

43

520. A. Nouri, H. Vaziri, and M.R. Islam, 2003, “A Comprehensive Approach for Modeling

Sanding During Oil Production”, SPE paper no. 81032, Proc. of SPE Latin American & Caribbean Petroleum Engineering Conference, Port of Spain, April 27-30.

521. H. Belhaj, K. Agha, and M.R. Islam, 2003, Numerical Modeling of Forchheimer's Equation

to Describe Darcy and Non-Darcy Flow in Porous Medium System, SPE paper no. 81037, Proc. of SPE Latin American & Caribbean Petroleum Engineering Conference, Port of Spain, April 27-30.

522. A. Nouri, H. Belhaj, H. Vaziri, and M.R. Islam, “Effect of Volumetric Failure on Sand

Production in Oil Well-Bores”, SPE Paper no. 80440, to be presented at SPE Asia Pacific Oil & Gas Conference and Exhibition (APOGCE), April, 2003.

523. H. Belhaj, A. Nouri, H. Vaziri, and M.R. Islam, “Numerical Modeling of Forchheimer's

Equation to Describe Darcy and non-Darcy Flow in Porous Medium System”, SPE paper no. 80448, to be presented at SPE Asia Pacific Oil & Gas Conference and Exhibition (APOGCE), April, 2003.

524. H. Belhaj, A. Nouri, S. Butt, M.R. Islam, 2002, “Experimental Modeling of Matrix/Fracture

Flow in Sandstone Reservoirs”, Proc. SPE Annual Technical Conference, Islamabad, Nov., 2002.

525. H. Belhaj, A. Nouri, H. Vaziri, M.R. Islam, 2002, “Experimental Determination of the

Effect of Pore Collapse on Permeability and Porosity of Sandstone Reservoirs”, Proc. SPE Annual Technical Conference, Islamabad, Nov., 2002.

526. N.M. Wasiuddin, N. Ali, M.R. Islam, "Use of Offshore Drilling Waste in Hot Mix Asphalt

(HMA) Concrete as Aggregate Replacement", paper no. EE 29168, ETCE ’02, Feb. 4-6, 2002, Houston, Texas.

527. Islam, M.R., and Wellington, S.L., 2001, “Past, Present and Future of Petroleum Research”,

SPE paper no. 68799, Proc. Western Regional Conference, Bakersfield, California.

528. Ara, T., S. Talabani, H. Vaziri, M.R. Islam, “In-depth investigation of the validity of the Archie equation”, SPE paper no. 67204, SPE Symposium on Production Operations, Oklahoma City, March 2001.

529. Muntasser, Z., H. Vaziri, M.R. Islam, “Prevention of corrosion in a harsh environment”,

SPE paper no. 67249, SPE Symposium on Production Operations, Oklahoma City, March 2001.

530. Paez, J., Blok, R., Islam, M.R., “Problems in hydrates: Practical Recommendations”, SPE

paper no. 67322, SPE Symposium on Production Operations, Oklahoma City, March 2001.

531. Paez, J., Vaziri, H., Islam, M.R., “Selection and optimization of low dosage inhibitors”,

44

SPE paper no. 67323, SPE Symposium on Production Operations, Oklahoma City, March 2001.

532. Soleimaninazar, A., Vaziri, H., Islam, M.R., “Experimental and mathematical modeling of

wax deposition”, SPE paper no. 67328, SPE Symposium on Production Operations, Oklahoma City, March 2001.

533. Ghanei, M., Vaziri, H., Islam, M.R., “The application of a continuous three-dimensional

solubility parameter in modeling asphaltene precipitation”, SPE paper no. 67329, SPE Symposium on Production Operations, Oklahoma City, March 2001.

534. Vaziri, H., Lemoine, E., and Islam, M.R., 2000, “How can sand production yield in several

fold increase in productivity: Experimental and field data”, SPE paper no. 63235, presented at the SPE Annual Technical Conference and Exhibition, Dallas, Oct.

535. Islam, M.R., 2000, "Emerging Technologies in Subsurface monitoring of Oil Reservoirs",

paper no. CIM 2000-89, Canadian International Petroleum Conference, Calgary, June.

536. Genyk, R., Ara, T., Malik, Q. and Islam, M.R., 2000, "Experimental and Mathematical Modeing of Ultrasonic treatments for breaking oil-water emulsions", paper no. 2000-87, Canadian International Petroleum Conference, Calgary, June.

537. Saghir, M.Z. and Islam, M.R., 2000, “Comprehensive Modeling of Fractures in a Porous

Medium”, paper no. CIM 2000-86, Canadian International Petroleum Conference, Calgary, June.

538. Malik, Q.M. and Islam, M.R., 2000, “CO2 Injection in the Weyburn Field of Canada:

Optimization of Enhanced Oil Recovery and Greenhouse Gas Storage With Horizontal Wells”, SPE paper no. 59327, SPE/DOE Conference on Enhanced Oil Recovery, Tulsa, OK, April.

539. Cheema, T.J., Newcomb, B. and Islam, M.R., 2000, “Geotechnical and hydrogeological

characterization of Rockbridge Country Landfill Site, Virginia”, Proceedings of the International Conference on Geoenvironment (ICG) 2000, Muscat, 4-7 March.

540. M.R. Islam and A.F. Abed , 1999, “Research Opportunities in Petroleum Engineering: The

Role of the Government and the Industry”, CIM paper 99-87, CIM Conference, Regina, Oct.

541. Sevgur, S.B., and Islam, M.R., 1999, “Engineering Design: Can Creativity and Teamwork be Taught in a Classroom?” CIM paper 99-95, CIM Conference, Regina, Oct.

542. Abou-Kassem, J.H., and Islam, M.R., 1999, “Hands-On Courses in Petroleum Engineering

Improve Performances”, CIM paper 99-96, CIM Conference, Regina, Oct.

543. Paddock, J. and Islam, M.R., 1999, “A New Technique for Cleaning Horizontal Wellbores”, CIM 99-98, CIM Conference, Regina, Oct.

45

544. Islam, M.R., Saleh, S.T., 1999, “The Impact of Formation Damage in a Horizontal Wellbore: Experimental and Numerical Studies”, CIM 99-110, CIM Conference, Regina, Oct.

545. Bjorndaien, N., and Islam, M.R., 1999, “A Simple Correlation for Estimating Pressure Drop

in a Horizontal Well”, CIM paper no. 99-117, CIM Conference, Regina, Oct.

546. Naami, A.M., Catania, P., and Islam, M.R., 1999, “Numerical and Experimental Modeling of Viscous Fingering in Two-Dimensional Consolidated Porous Medium”, CIM paper no. 118, CIM Conference, Regina, Oct.

547. Talabani, S., Thamir, F., and Islam, M.R., 1999, “Rock Permeability Measurement Using

Drilling Cutting”, CIM paper no. 99-127, CIM Conference, Regina, Oct.

548. Zhong, L., Siddiqui, S., El-Hordalo, S., and Islam, M.R., 1999, “New Screening Criteria for Selection of Acid-Foam Surfactants”, CIM paper no. 99-92, CIM Conference, Regina, Oct.

549. Zhong, L. and Islam, M.R., 1999, “Experimental and Numerical Modeling of Microbial

Plugging of a Fracture”, CIM paper no. 99-124, CIM Conference, Regina, Oct.

550. Talabani, S. and Islam, M.R., 1999, “Diverting Acid into Low Permeability Reservoir Using Foam for Stimulation”, CIM paper no. 99-122, CIM Conference, Regina, Oct.

551. Islam, M.R., Harding, T., Stewart, B., and Moberg, R., 1999, “Heavy Oil Research in

Canada”, IEA Workshop on EOR, Sept. Paris, France.

552. Brown, K., Islam, M.R., Wilson, M., and Stewart, B., 1999, “An Expert Workshop on Weyburn Miscible Flood Monitoring”, IEA Workshop on EOR, Sept. Paris, France.

553. Paddock, J. and Islam, 1999, “A New Equation of State for Crude Oils with Microbubbles”,

CIM 99-35, Joint CSPG and Petroleum Society Technical Meeting, June, Calgary.

554. M.Z. Saghir, O. Chaalal, Islam, M.R., 1999, “Experimental and Numerical Studies of Liquid-Liquid Miscible Viscous Fingering”, CIM 99-34, Joint CSPG and Petroleum Society Technical Meeting, June, Calgary.

555. Chaalal, O. Islam, M.R. and Viraraghavan, T., 1999, “A Novel Method of Purification of

Arsenic Contaminated Water”, CSChE Conference, Saskatoon, Oct.

556. Chaalal, O. and Islam, M.R., 1999, “A New Method for Strontium Separation from Aqueous Streams”, CSChE Conference, Saskatoon, Oct. (paper submitted for publication in J Env. Management).

557. Chaalal, O. and Islam, M.R., 1999, “A New Method for Teaching Physical Chemistry”,

CSChE Conference, Saskatoon, Oct.

558. Malik, Q. and Islam, M.R., 1999, “Potential of Greenhouse Gas Storage and Utilization

46

through Enhanced Oil Recovery”, CSChE Conference, Saskatoon, Oct.

559. Islam, M.R. and Abou-Kassem, J.H., 1998, "Experimental and Numerical Studies of Electromagnetic Heating of a Carbonate Formation", SPE paper no. 49187, Proc. of the SPE Annual Technical Conference and Exhibition, New Orleans, USA.

560. Kocabas, I., Islam, M.R., 1998, "A Wellbore Model for Predicting Asphaltene Plugging",

SPE paper no. 49199, Proc. of the SPE Annual Technical Conference and Exhibition, New Orleans, USA.

561. AlQushairi, A.E., Abou-Kassem, J.H., Islam, M.R., 1998, "An Experimental And

Numerical Study of Steam Injection In Carbonate Formations", SPE paper no. 49555, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

562. AlAdhab, H., Kocabas, I., Islam, M.R., 1998, "Field-Scale Modeling of Asphaltene

Transport in Porous Media", paper SPE paper no 49557, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

563. deMontigny, D., Abou-Kassem, J.H., Islam, M.R., 1998, "A Comprehensive Numerical

Simulator Of Gas Absorption With Unsteady Heat And Mass Transfer", SPE paper no. 49500, SPE ADIPEC 98, Abu Dhabi, UAE.

564. George, D.S. and Islam, M.R., 1998, "A Micromodel Study of Acidization Foam", paper no

paper no. 49489, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

565. Zhong, L., Siddiqui, S., and Islam, M.R., 1998, "A Rapid Standard Test for Testing Foam-Forming Surfactants", SPE paper no 49559, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

566. Siddiqui, S., Abou-Kassem, J.H., Islam, M.R., 1998, "A Comprehensive Numerical Model

For Foam-Diversion", SPE paper no 49486, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

567. AlMaghrabi, I., BinAqil, A., Chaalal, O., and Islam, M.R., 1998, "Thermophilic Bacteria in UAE Environment Can Enhance Biodegradation and Mitigate Wellbore Problems", SPE paper no. 49545, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

568. AlAwadhy, F., Abou-Kassem, J.H., Islam, M.R., 1998, "Experimental and Numerical

Modeling of Sulfur Plugging in a Carbonate Reservoir", SPE paper no. 49498, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

569. AlMansoori, Y.J., Abou-Kassem, J.H., Islam, M.R., 1998, "Role Of Dimensionality In

Reservoir Simulation Of Chemical Flooding", SPE paper no. 49550, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

570. AlFalahy, M.A., Abou-Kassem, J.H., and Islam, M.R., 1998, "Sour Gas Processing,

Disposal, And Utilization As Applied In UAE Reservoirs", SPE paper no. 49504, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

47

571. Sevgur, S.B. and Islam, M.R., 1998, "Manpower Recruitment Policy in UAE: A Survey of

the UAE Expatriates", SPE paper no. 49553, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

572. Sevgur, S.B. and Islam, M.R., 1998, "Research Guidelines for Affluent Developing Countries", SPE paper no. 49552, Proc. SPE ADIPEC 98, Abu Dhabi, UAE.

573. Al-Maghrabi, I., Chaalal, O., and Islam, M.R., 1998, "A New Technique of Solar

Bioremediation", 3rd Int. Conf. Solar Electricity, Sharjah, UAE, March.

574. Al-Disi, S.A., Abou-Kassem, J.H., and Islam, M.R., 1998, "Comprehensive Numerical Simulation of a Solar Panel", 3rd Int. Conf. Solar Electricity, Sharjah, UAE, March.

575. Al-Maghrabi, I.M.A., BinAqil, A., Chalaal, O., and Islam. M.R., 1997, "Use of

Thermophilic Bacteria for Bioremediation of Petroleum Contaminants", 2nd Annual Conference on Water Technology and Environment, Doha, Qatar, Dec.

576. AlAwadhy, F.K., Chalaal, O., and Islam, M.R., 1997, "A Non-Fickian Model for

Simulating Potassiam Transport in Carbonate Formations", 2nd Annual Conference on Water Technology and Environment, Doha, Qatar, Dec.

577. AlAdhab, H.E., Chalaal, O., and Islam, M.R., 1997, "A Novel Water Purification

Technique", 2nd Annual Conf. on Water Technology and Environment, Doha, Qatar, Dec.

578. Talabani, S., Hareland, G., Islam, M.R., 1997, “Gas Migration Eliminated Through Correct Cement Design Including Elastomers”, SPE 39279, Bahrain, Nov.

579. Ali, M. and Islam, M.R., 1997, “Experimental and Numerical Modeling of Asphaltene

Plugging in porous Media”, SPE paper no. 38856, Proceeding of the SPE Annual Conference and Exhibition, San Antonio, USA, Oct.

580. Talabani, S., Hareland, G., Islam, M.R., 1997, “Matrix Acid Stimulation in a Multi-

Layered Reservoir Using Foam”, SPE paper no. 38958, Proc. Latin American/Caribbean Petroleum Engineering Conference, Argentina.

581. Saghir, M.Z. and Islam, M.R., 1997, “Convection in a Two-Liquid Layer System with Low

Prandtl Number”, International Symposium on Liquid-Liquid Two-Phase Flow & Transport Phenomena, Antalya, Turkey, Nov.

582. Saghir, M.Z., Hennenberg, M., and Legros, J.C., 1997, “Rayleigh-Marangoni Convection

in a Porous Cavity", International Conference on Heat and Mass Transfer, Cesme, Turkey.

583. Islam, M.R. and Saghir, M.Z., 1997, “Comprehensive Numerical Simulation of a Desalination Plant”, International Conference on Heat and Mass Transfer, Cesme, Turkey.

584. Saghir, M.Z., Hennenberg, M., Legros, J.C., and Islam, M.R., 1997, “Interactions Between

48

the Marangoni and Intrusion Forces in Multicavity System”, International Conference on Heat and Mass Transfer, Cesme, Turkey, May.

585. Siddiqui, S., Saleh, S.T., Islam, M.R., 1997, "A Laboratory Investigation of Foam Flow in

Low-Permeability Berea Sandstone Cores", SPE 37416, SPE Production Operations Symposium, Oklahoma City, OK.

586. Siddiqui, S., Saleh, S.T., Islam, M.R., 1997, "An Experimental Investigation of the

Diversion Characteristics of Foam in Berea Sandstone Cores of Contrasting Permeabilities", SPE 37463, SPE Production Operations Symposium, Oklahoma City, OK, 1997.

587. Islam, M.R. and Saghir, M.Z., 1997, “Instability in Combined Heat and Mass Transfer

Problems in Porous Media with Temperature Dependent Viscosity”, International Conference on Heat and Mass Transfer, Cesme, Turkey.

588. Zhong, L. and Islam, M.R., 1996, "Enhancing Bacteriogenic Consolidation", 30th

International Geological Congress, Beijing, China, August.

589. Bang, S.S., Islam, M.R., and Ramakrishan, V., 1996, "Novel Materials for Reinforcing Concrete", TRB Annual Meeting, Washington, D.C., Jan.

590. Zhong, L. and Islam, M.R., 1995, "Microbial Consolidation Can Improve Sand Control and

Fracture Remediation", Oil and Gas Reporter, Dec., 83-86.

591. Zhong, L. and Islam, M.R., 1995, "A New Microbial Plugging Process and Its Impact on Fracture Remediation", SPE paper no. 30519, Proc. SPE Annual Conference and Exhibition, Dallas, TX, Oct.

592. Zhong, L., Saleh, S.T., and Islam, M.R., 1995, "An Experimental and Numerical Study of

Foam Flow in Porous Media", Proc. International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Region, Al-Ain, U.A.E., December.

593. Al-Lawati, S., Saleh, S.T., Graves, R.M., Poettman, F., and Islam, M.R., 1995, "Imbibition

Oil Recovery in Low-IFT Flow System", Proc. International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Region, Al-Ain, U.A.E., December.

594. Islam, M.R., 1995, "Emerging Technologies in Enhanced Oil Recovery", Proc. International

Conference on Improved Oil Recovery in the Gulf Region, Key-note Speech, SPE Middle Eastern Section, Al-Ain, U.A.E., December.

595. Saleh, S.T., Graves, R.M., Sundaram, N.S., and Islam, M.R., 1995, "Experimental and

Numerical Modeling of Dynamic Interfacial Tension in an Oil-Surfactant-Water System", Proc. International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Region, Al-Ain, U.A.E., December.

596. Chakma, A. and Islam, M.R., 1995, "Novel Methods for Controlling Asphaltene

49

Precipitations", Proc. International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Region, Al-Ain, U.A.E., December.

597. Chakma, A. and Islam, M.R., 1995, "Enhanced Oil Recovery with CO2 Injection - A

Contribution to the Solution of the Global Warming Problem", Proc. International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Region, Al-Ain, U.A.E., December.

598. Saleh, S.T., Rawalani, M. El-Rabaa, W. and Islam, M.R., 1995, "Formation Damage

Assessment in Horizontal Wells: Experimental and Numerical Studies", Proc. International Conference on Improved Oil Recovery in the Gulf Region, SPE Middle Eastern Region, Al-Ain, U.A.E., December.

599. Islam, M.R., Uzunlar, N., and Saleh, S.T., 1995, "Numerical Simulaiton of CO2 Storage

and Utilization in the Mid-western U.S.A.", IEA CO2 Disposal Symposium, London, UK.

600. Livingston, R.J., Burkard, J.D., Islam, M.R., 1995, "Laboratory Modeling, Field Study and Numerical Simulation of Bioremediation of Petroleum Contaminants", Proc. Rocky Mountain Symp. on Environmental Issues in Oil and Gas Operations, Golden, CO, Oct.

601. Song, F.Y. and Islam, M.R., 1995, "Further Developments in Modeling of Foam-Forming

Surfacting Adsorption", AIChE Summer National Conference, Aug.

602. Choi, E.S., Cheema, T.J., Islam, M.R., 1995, "A New Dual Porosity/Dual Permeability Model with Non-Darcian Flow Through Fractures", Proc. International Geophysical Conference & Exposition, St. Petersburg, Russia, July.

603. Rampersad, P.R., Ogbe, D.O., Kamath, V.A., and Islam, M.R., 1995, "Impact of Trapping

of Residual Oil by Mobile Water on Recovery Performance in Miscible Enhanced Oil Recovery Processes", Proc. SPE Joint Rocky Mountain Regional Meeting and Low-Permeability Reservoirs Symposium, March, 1995, Denver, CO.

604. Kanakamedala, R. and Islam, M.R., 1995, "A New Method of Petroleum Sludge" Disposal

and Utilization", paper presented at the UNITAR/UNDP UNITAR International Conference on Heavy Crude and Tar Sands, Feb., Houston, TX.

605. Song, F.Y. and Islam, M.R., 1995, "Multicomponent Adsorption in EOR Applications",

paper presented at the UNITAR/UNDP UNITAR International Conference on Heavy Crude and Tar Sands, Feb., Houston.

606. Gollapudi, U., S.S. Bang, and Islam, M.R., 1994, Ultrasonic Treatment For Removal Of

Asphaltene Deposits During Petroleum Production”, SPE 27410, New Orleans LA.

607. Cheema, T.J. and Islam, M.R., 1994, "Fractures, Fracture Traces, and Directional Permeability: A Field, Experimental and Numerical Study", 37th Annual AEG Conference, Williamsburg, VA, Oct.

50

608. Cheema, T.J. and Islam, M.R., 1994, "Characterization of Mudrocks", 7th Annual AEG

Conference, Williamsburg, VA, Oct.

609. Basu, A. and Islam, M.R., 1994, "Instability in Thermochemical Convection in Porous Media", CSChE Annual Conference, Calgary, Canada, Book of Abstract.

610. Gollapudi, U.K., Knutson, C.L., and Islam, M.R., 1994, "Control of Contaminant Leaching

Through Highly Permeable Formations", Proc. 1994 Rocky Mountain Symposium on Environmental Issues in Oil and Gas Operations, Golden, CO, July.

611. Cheema, T.J., Islam, M.R., 1994, "A New Modeling Approach for Predicting Anisotropic

Behavior of Fractured Formations", Pacific Northwest/Oceania Conference, Oahu, HI, March.

612. Cheema, T.J., Davis, A.D., and Islam, M.R., 1994, "Fracture, Fracture Traces, and Directional Permeability - An Interdisciplinary Approach", Proc. Fourteenth Annual American Geophysical Union Hydrology Days, Ft. Collins, CO, April.

613. Sarwar, M. and Islam, M.R., 1994, "Transport of an Anionic Surfactant in Fractured Porous

Media: An Experimntal and Numerical Study", Proc. Fourteenth Annual American Geophysical Union Hydrology Days, Ft. Collins, CO, April.

614. Song, F.Y. and Islam, M.R., 1994, "A New Mathematical Model and Experimental

Validation of Multicomponent Adsorption", SPE 27413, SPE/DOE 1994 Improved Oil Recovery Symposium, Tulsa, OK.

615. Song, F.Y., Teng, X.S., and Yu, G.P., and M.R. Islam, 1994, "Computer Control of Oilfield

Production in China", paper SPE-27573, SPE Computer Applications Conference, Aberdeen, April.

616. Smordal, K. and Islam, M.R., 1994, "A Novel Compact High Efficiency Jet Absorber for

Use in Space", AIChE Spring National Meeting, Atlanta, GA, April.

617. Cheema, T. and Islam, M.R., 1993, "Laboratory Determination of Hydraulic Conductivity Tensor in Discontinuous Fractured Media", American Geophysical Union Annual Meeting, San Francisco, April.

618. Livingston, R.J., Bang, S.S., Islam, M.R., 1993, "Bioremediation of Petroleum

Contaminants: An Experimental, Numerical and Field Study", AIChE Annual Meeting, St. Louis.

619. N.S. Sundaram, C.L. Knutson, and M.R. Islam, 1993, "Soil Venting with Electrical Heating

as In Situ Remediation Technique", AIChE Annual Meeting, St. Louis, 1993.

620. Song, F.Y. and Islam, M.R., 1993, "Numerical Simulation and Experimental Validation of Multicomponent Adsorption of Foam-Forming Surfactants", AIChE Annual

51

Meeting, St. Louis, 1993.

621. Carter, J. and Islam, M.R., 1993, "Flow Instabilities in Porous Media in the Presence of Thermo-Chemical Convection", Winter Conf. Amer. Nucl. Soc., San Francisco, CA.

622. Cheema, T. and Islam, M.R., 1993, "Modeling Fluid Flow Through Fractured

Formations", 36th Annual Meeting of the Assoc. Eng. Geol., San Antonio.

623. Sarwar, M., Sundaram, N.S., Bang, S.S., and Islam, M.R., 1993, "Biodegradation of Anionic Surfactants in the Presence of Petroleum Contaminants", 3rd Annual Symposium on Groundwater and Soil Remediation, Quebec City.

624. Islam, M.R., 1993, "Route to Chaos in Porous Media with an Internal Heat Source",

ASME/AIChE National Heat Transfer Conf., Atlanta, GA.

625. Islam, M.R. and Chakma, A., 1993, "Storage and Utilization of CO2 in Petroleum Reservoirs-A Simulation Study", IEA CO2 Disposal Symposium, Oxford, England.

626. Russman, B. and Islam, M.R., 1993, "Flow Instabilities in an Inclined Porous Medium

Under Non-Darcy Flow Regime", ASME/AIChE National Heat Transfer Conf.

627. Islam, M.R., 1993, "Mixed Convection in a Large-Aspect Ratio Porous Medium under Non-Darcy Flow Regime", ASME/AIChE National Heat Transfer Conf., Atlanta, GA, 1993.

628. Islam, M.R. and Bang, S.S., 1993, "Use of Ultrasonic Treatment for Remedial of

Asphaltene Plugging in Petroleum Production", Fine Particle Society Annual Conference, Chicago, IL.

629. Smordal, K. and Islam, M.R., 1993, "Numerical Simulation of a Novel Technique for

Upgrading Heavy Residuum", Fine Particle Society Annual Conference, Chicago, IL.

630. Gollapudi, U.K. and Islam, M.R., 1993, "Reinforcement of Asphaltic Materials", Fine Particle Society Annual Conference, Chicago, IL, July.

631. Sundaram, N.S., Davis, A.D., and Islam, M.R., 1994, "Numerical Simulation of

Petroleum Contaminant Removal from Vadose Zone with Surfactant Solutions", Groundwater Modeling Conference, Denver, CO, July.

632. Sundaram, N.S. and Islam, M.R., 1993, "Scaled Model Studies of Petroleum

Contaminant Removal from Soils Using Surfactant Solutions", Emerging Technology Session, Outdoor Action Conference, May, Las Vegas, NE.

633. Islam, M.R., 1992, "Route to Chaos in Chemically Enhanced Thermal Convection in

Porous Media", Proc. of the AIChE Annual Meeting, Miami Beach, FL, 1992.

634. Kowalski, C., Berruti, F., Chakma, A., and Islam, M.R., 1991, "A Mechanistic Model for

52

Microbial Transport Through Porous Media", Conf. of the Can. Soc. Chem. Eng., Vancouver, B.C., Canada, Oct., 1991.

635. Islam, M.R., 1991, "A New Recovery Technique for Gas Production From Alaskan Gas

Hydrates", SPE-22924, Proc. of the SPE Annual Conf. and Exhib., Dallas, TX, 1991.

636. Bansal, A. and Islam, M.R., 1991, "State-of-the-art Review of Non-Destructive Testing with Computer Assisted Tomography", SPE-22127, Proc. of the International Arctic Technology Conference, Anchorage, 1991.

637. Deng, F. and Islam, M.R., 1991, "Mathematical Modeling of Foam-Forming Surfactants

Under Reservoir Temperature Conditions", SPE-22174, Proc. of the International Arctic Technology Conference, Anchorage, 1991.

638. Wadadar, S.S. and Islam, M.R., 1991, "Numerical"Simulation of Gravity- Assisted Steam

Injection and Electromagnetic Heating of Ugnu Tar Sands of Alaska", paper SPE 22177, Proc. of the International Arctic Technology Conference, Anchorage.

639. Bansal, A. and Islam, M.R., 1991, "Scaled Model Studies of Heavy Oil Recovery From

Alaskan Reservoir Using Gas Injection with Horizontal Wells", CIM/AOSTRA 91-34, Proc. of the CIM/AOSTRA Technical Conference, Banff, Canada.

640. Wadadar, S.S., and Islam, M.R., 1991, "Numerical Simulation of Electromagnetic Heating

of Alaskan Tar Sands Using Horizontal Wells", CIM/AOSTRA 91-35, Proc. of the CIM/AOSTRA Technical Conference, Banff, Canada, 1991.

641. Islam, M.R., 1990, "Mathematical Modeling of Microbial Enhanced Oil Recovery", SPE

paper no. 20480, Proc. the SPE Annual Conf. and Exhib., New Orleans.

642. Islam, M.R. and Chakma, A., 1990, "Comprehensive Physical and Numerical Modeling of a Horizontal Well", SPE paper no. 20627, Proc. of the SPE Annual Conf. and Exhib., New Orleans.

643. Meszaros, G., Chakma, A., Jha, K., and Islam, M.R., 1990, "Scaled Model Studies and

Numerical Simulation of Inert Gas Injection with Horizontal Wells", SPE paper no. 20529, Proc. of the SPE Annual Conf. and Exhib., New Orleans, 1990.

644. Islam, M.R., 1990, "Cosurfactant-Enhanced Alkaline/Polymer Floods for Improving

Recovery in a Fractured Sandstone Reservoir", Ann. Conf. of the Fine Particle Society, San Diego, August.

645. Islam, M.R. and Kamath, V.A., 1990, "The Role of Asphaltene Aggregation in Viscosity

Variation and Miscible Flooding of reservoir Hydrocarbons", Ann. Conf. of the Fine Particle Society, San Diego, August.

646. Islam, M.R., Wadadar, S., Bansal, 1991, "Conventional and Hot Waterflood for

53

Recovering Heavy Oil from Alaskan Reservoirs", proc. of the 5th UNITAR/UNDP Conf. on Heavy Crude and Tar Sands, Caracus, Venezuela, Aug.

647. Islam, M.R., Mbride, M., and Chakma, A., and Islam, M.R., 1991, "Numerical

"Numerical Simulation of a Novel Recovery Technique for Heavy Oil Reservoirs with Bottomwater", Proc. of the 5th UNITAR/UNDP Conf. on Heavy Crude and Tar Sands, Caracus, Venezuela, Aug.

648. Islam, M.R., Verma. A., and Farouq Ali, S.M., 1991, "In Situ Combustion - The Essential

Reaction Kinetics", Proc. of the 5th UNITAR/UNDP Conf. on Heavy Crude and Tar Sands, Caracus, Venezuela, Aug.

649. Islam, M.R., 1990, "Comprehensive Mathematical Modelling of Horizontal Wells", paper

no. 69, Proc. of the 2nd European Conf. on the Mathematics of Oil Recovery, Latitudes Camargue, Arles, France, Sept. 11-14, 1990.

650. Islam, M.R. and Gianetto, A., 1990, "Mathematical Modelling and Scaling Up of Microbial Enhanced Oil Recovery", paper SPE/CIM-130, Proc. of the SPE/CIM International Technical

Conference, Calgary, June.

651. Islam, M.R. and Chakma, A., 1990, "A New Recovery Technique for Heavy Oil Reservoirs With Bottom Water", paper SPE/DOE-20258, presented at the Seventh SPE/DOE Symp. Enhanced Oil Recovery, Tulsa, April.

652. Islam, M.R. and Chakma, A., 1990, "Mechanics of Bubble Flow in Heavy Oil

Reservoirs", SPE-20070, Rroc. of the SPE California Regional Meeting, April, 1990.

653. Islam, M.R., Berruti, F., and Chakma, A., 1990, "Modelling of A Jet Absorber", paper no. 98c, presented at the High Efficiency Gas Absorber Symp., AIChE 1990 Spring National Meeting, held in Orlando, FL, March.

654. Chakma, A., and Islam, M.R., 1990, "Modelling of Visbreaking of Bitumen in a Jet

Reactor", International Chemical Congress of Pacific Basin Societies, Honolulu.

655. Islam, M.R., Chakma, A., Nandakumar, K., 1990, "Flow Instability in Mixed Convection in a Porous Medium Saturated with Water Near 4 C", 39th Canadian Chemical Engineering Conference, held in Hamilton, Oct.

656. Islam, M.R., and Chakma, A., 1989, "Modelling of Foam Flow in Porous Media Under

High Temperature and Pressure Conditions", AIChE National Meeting, Philadelphia.

657. Islam, M.R., and Farouq Ali, S.M., 1989, "Scaling of In-Situ Combustion", Proc. of the Third Saskatchewan Petroleum Conference, held in Regina, Canada, 1989.

658. Islam, M.R., 1989, "Modelling of Kinetics of In-Situ Combustion", International

Symposium on Kinetics of Non Homogeneous Processes, held in Banff, Oct.

54

659. Islam, M.R. and Nandakumar, K., 1989, "Evolution of Oscillatory and Chaotic Flows in

Inclined Porous Ducts With Internal Heat Sources", Proc. of the VIth Int. Conf. on Numerical Methods in Laminar and Turbulent Flow, Swansea, U.K.

660. Islam, M.R. and Chakma, A., 1989, "A Compact High Performance Absorber for Small

Size Remote Field Gas Processing", paper no. SPE 19083, Proc. of the 1989 Gas Technology Symposium held in Dallas, TX, 1989.

661. Islam, M.R. and Erno, B.P., 1989, "The Role of Combustion Gases in Recovering Oil in

In-Situ Combustion Processes", Proc. of the 5th Heavy Oil Conf., held in Calgary, 1989.

662. Islam, M.R., Erno, B.P., and Davis, D., 1989, "Hot Water and Gas Flood Equivalence of In Situ Combustion", paper CIM 89-40-49, Proc. of the 40th Ann. Tech. Conf.of the Pet. Soc. of CIM, held in Banff, Canada.

663. Islam, M.R., and Farouq Ali, S.M., 1989, "Numerical Simulation of Emulsion Flow

Through Porous Media", paper CIM 89-40-63, Proc. of the 40th Ann. Tech. Conf.of the Pet. Soc. of CIM, held in Banff, Canada, 1989.

664. Taylor, K.C., Hawkins, B.F., and Islam, M.R., 1989, "Dynamic Interfacial Tension in

Surfactant-Enhanced Alkaline Flooding", paper CIM 89-40-44, Proc. of the 40th Ann. Tech. Meet. of the Pet. Soc. of the CIM, held in Banff, Canada.

665. Islam, M.R. Chakma, A., 1989, "Mechanisms and Process Selection Criteria for Waste

Water Treatment in Petroleum Production", CIM paper no. 89-40-87, Proc. of the 40th Ann. Tech. Meet. of the Pet. Soc. of the CIM, held in Banff, Canada, 1989.

666. Chakma, A., and Islam, M.R., 1989, "Compositional Dependence of Viscosity of

Bitumen/Heavy Oil", paper CIM 89-40-68, Proc. of the 40th Ann.Tech. Meet. of the Pet. Soc. of the CIM, held in Banff, Canada.

667. Islam, M.R., 1989, "Reservoir Description of a Complex Heterogeneous Reservoir for

Numerical Simulation Study", CIM paper no. 89-40-78, Proc. of the 40th Ann. Tech. Meet. of the Pet. Soc. of the CIM, held in Banff, Canada.

668. Islam, M.R. and Chakma, A., 1989, "Simulation of Activated Carbon Adsorbers Used in

Gas Plants", presented at the AIChE Spring National Meeting, Houston, TX, April 2-6.

669. Islam, M.R., Macdonald, T., Chakma, A., and Farouq Ali, S.M., 1989, "New Mathematical Representation of Foam Flow Through Porous Media Under Reservoir Conditions", presented at

the AIChE Spring National Meeting, Houston, TX, April.

670. Islam, M.R., Chakma, A., and Farouq Ali, S.M., 1989, "State-of-the-Art of In situ Combustion Modelling and Operations", SPE-18755, Proc. of the SPE California Regional Meeting, Bakersfield, CA, April.

55

671. Islam, M.R., George, A.E., 1989, "Sand Control in Horizontal Wells in Heavy Oil

Reservoirs", SPE-18789, SPE California Regional Meeting, Bakersfield, CA.

672. Farouq Ali, S.M., Chakma, A., and Islam, M.R., 1989, "Mathematical Modeling of Non-Equilibrium Phenomena in Chemical Injections", Proc. of the Fifth Europ.Symp. on Improved Oil Recovery, Budapest, Hungary, April.

673. Islam, M.R., Macdonald, T., Chakma, A. and Farouq Ali, S.M., 1989, "Experimental and

Numerical Study of Foam Flow Through Porous Media", Proc. of the Third Int. Symp. on EOR held in Maracaibo, Venezuela.

674. Islam, M.R., and Chakma, A., 1988, "Role of Dynamic Interfacial Tensions in Numerical Simulation of Cosurfactant/ Alkaline/Polymer Floods", paper no.98-e, presented at the AIChE Ann. Meet., Wash., D.C., Nov.

675. Farouq Ali, S.M. and Islam, M.R., 1988, "Emulsion Slugs for Improved Waterfloods -An

Experimental and Theoretical Study", (Invited Paper), presented at the 7th Int. Symp. on Surfactants in Solution, Ottawa.

676. Islam, M.R., 1988, "Theory and Application of New Scaling Approaches for Cosurfactant/

Alkaline/Polymer Flood Experiments", paper 8-14, presented at the 7th Int.Symp. on Surf. in Solution, Ottawa, 1988.

677. Islam, M.R. and Chakma, A., 1988, "Numerical Simulation of Cosurfactant-Enhanced

Chemical Floodings", paper 8-15, 7th Int. Symp. on Surf. in Solutions., Ottawa, Oct. 2-7.

678. Islam, M.R. and Nandakumar, K., 1988, "Cellular Pattern Evolution in a Porous Duct with Internal Heat Generation", paper 15a, 38th Can.Chem. Eng. Conf., Edmonton.

679. Islam, M.R. and Farouq Ali, S.M., 1988, "A Complete Scaling Technique for In-situ

Combustion Experiments", 25d, 38th Can. Chem. Eng. Conf., Edmonton, 1988.

680. Islam, M.R. and Taylor, K., 1988, "The Role of Dynamic Interfacial Tension in Cosurfactant-Enhanced Alkaline/Polymer Floods", paper 32d, presented at the 38th Canadian Chemical Engineering Conference, Edmonton.

681. Islam, M.R. and Farouq Ali, S.M., 1988, "An Experimental and Numerical Study of

Blockage of a Mobile Water Zone by an Emulsion", paper #133, Proc. of the UNITAR/UNDP 4th Int.Conf. on Heavy Crude & Tar Sands, Edmonton.

682. Islam, M.R. and Farouq Ali, 1988, "Numerical Simulation of Alkaline/Co-surfactant/

Polymer Flooding", paper #163, Proc. of the UNITAR/UNDP 4th Int. Conf. on Heavy Crude & Tar Sands, Edmonton, August.

56

683. Islam, M.R. and Farouq Ali, S.M., 1988, "Numerical Simulation of Foam Flow in Porous Media", CIM 88-39-4, Proc. of the Ann. tech. Meet. of the Pet. Soc. of CIM, Calgary, June.

684. Islam, M.R. and Farouq Ali, S.M., 1988, "New Scaling Criteria for Chemical Flooding

Experiments", CIM 88-39-99, Proc. of the Ann. Tech. Meet. of the Pet. Soc. of CIM, Calgary, June, 1988.

685. Islam, M.R. and Farouq Ali, S.M., 1987, "Improving Waterflood Performance in Oil

Reservoirs with Bottom Water", paper SPE 16727, Proc. of the 62nd Annual Tech. Conf. and Exhib. of the SPE, Dallas, Texas, 1987.

686. Islam, M.R. and Farouq Ali, S.M., 1987, "Polymer As a Blocking and Mobility Control

Agent in the Presence of a Bottom-water Zone", Proc. of the Second Saskatchewan Regional Conference of the Petroleum Society of CIM, Regina, 1987.

687. Farouq Ali, S.M., Redford, D.A., and Islam, M.R., 1987, "Scaling Laws for Enhanced

Oil Recovery Experiments", Proc. of the China-Canada Heavy Oil Symposium, Zhu Zhu City, China, 1987.

688. Farouq Ali S.M., and Islam, M.R., 1987, "The Use of Oil/Water Emulsions As a Blocking

and Diverting Agent", presented at the AOSTRA Ann. Spring Conf., 1987.

689. Islam, M.R. and Farouq Ali, S.M., 1987, "Waterflooding Oil Reservoirs with Bottom Water", paper CIM 87-38-26, presented at the 38th Ann. Tech. Meet. of the Pet. Soc. of CIM, Calgary.

690. Islam, M.R. and Farouq Ali, S.M., 1987, "New Scaling Criteria for Polymer, Emulsion

and Foam Flooding Experiments", paper CIM 87-38-76, Proc. of the 38th Ann. Tech. Meet. of the Pet. Soc. of CIM, Calgary, 1987.

691. Islam, M.R., Selby, R.J., and Farouq Ali, S.M., 1987, "Mechanics of Foam Flow in Porous

Media and Applications", paper CIM 87-38-77, Proc. of the 38th Ann. Tech. Meet. of the Pet. Soc. of CIM, Calgary, 1987.

692. Islam, M.R. and Nandakumar, K., 1985, "Mixed Convection Flow in Fluid Saturated

Porous Media in the Non-Darcy Regime", Proc. of the IVth International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, U.K., 1985.

693. Islam, M.R. and Bentsen, R.G., 1985, "A Dynamic Method for Measuring Relative

Permeability", paper CIM 85-36-43, Proc. of the 36th Ann. tech. Meet. of the Pet. Soc. of CIM, Edmonton.

CONFERENCE PRESENTATIONS (ABSTRACTS ONLY)

694. Al-Darbi, M. M., K. Agha and M. R. Islam. 2004. Numerical Modeling of the Pitting Microbiologically Influenced Corrosion of Steel Pipelines. The 54th Canadian Chemical

57

Engineering Conference. Calgary, Alberta, Canada.

695. Al-Darbi, M. M., N. O. Saeed, L.O. Ajijolaiya and M. R. Islam. 2004. A Novel Approach to Reduce Plastic Shrinkage in Cement Mortar using Natural Hair Waste. The 87th Canadian Chemistry Conference (CSC 2004). London, Ontario, Canada.

696. Ajijolaiya, L.O., Khelifa, A., Hill, P.S., Lee, K., and Islam, M.R., 2004, “Contribution of

OMA-formation to oil spill rememdiation: Laboratory investigation using Epi-fluorescent miscrocopy”, Nova Scotia Energy Forum, May 13-14.

697. Al-Darbi, M. M., K. Agha and M. R. Islam. 2003. Modeling of the Microbial Influenced

Corrosion in Pipeline Systems. The 53rd Canadian Chemical Engineering Conference (CSChE 2003). Hamilton, Ontario, Canada.

698. Al-Darbi, M. M., N. O. Saeed and M. R. Islam. 2002. Biocorrosion and Microbial Growth

Inhibition using Natural Additives. The 52rd Canadian Chemical Engineering Conference (CSChE 2003). Vancouver, BC, Canada.

699. Al-Darbi, M. M. and M. R. Islam. 2002. Corrosion Inhibition of Cooling Water Systems:

Theoretical and Experimental Approaches. The 52rd Canadian Chemical Engineering Conference (CSChE 2003). Vancouver, BC, Canada.

700. Al-Darbi, M. M., N. O. Saeed, K. Lee and M. R. Islam. 2002. Biodegradation of Natural

Oils in Marine Environments. The CIM Petroleum Society Technical Seminars, held in conjunction with the Offshore/Onshore Technologies Association of Nova Scotia's Canadian Offshore Resources Conference. Halifax, NS, Canada

701. Al-Darbi, M. M., A. A. Jaralla, Z. M. Muntasser and M. R. Islam. 2001. Protection of Mild

Steel against Corrosion Using Mixed Inhibitor Combination. The 51st Canadian Chemical Engineering Conference. Halifax, NS, Canada.

702. H. Rahman, M.R. Islam, “A Novel Method for Removal of Arsenic from Aqueous

Streams”, CSChE Conference, Vancouver, Canada, Oct., 2002.

703. M. AlDarbi, K. Lee, H.Mann, M.R. Islam, “Biodegradation of Natural Oils”, OTANS Conference, Halifax, Oct., 2002.

704. Agha, K., Belhaj, H., and Islam, M.R., “Prospects of Laser Drilling in Petroleum

Formations”, OTANS Conference, Halifax, Oct., 2002.

705. M. Ghiasi, and M.R. Islam, “Numerical Modeling of Oil Pollution of Groundwater”, OTANS Conference, Halifax, Oct., 2002.

706. M. Zaman, K. Agha, Islam, M.R., Laser Based Detection of Paraffin in Paraffinic Crude Oil

Samples: A Numerical and Experimental Study, OTANS Conference, Halifax, Oct., 2002.

58

707. H. Belhaj, A. Nouri, Islam, M.R., Modeling of Matrix/Fracture Flow in Sandstone: An Experimental Approach, OTANS Conference, Halifax, Oct., 2002.

708. Nouri, A., Vaziri, H.H, H., Islam, M.R., Experimental Determination of Effects of Pore

Collapse on Permeability and Porosity of Sandstone Reservoirs, OTANS Conference, Halifax, Oct., 2002.

709. Nouri, A., Belhaj, H., Islam, M.R., Evaluating Contributions of Pore-Collapse Phenomena

in Sanding During Oil Production, OTANS Conference, Halifax, Oct., 2002.

710. Abdullah, A. and Islam, M.R., 2001, “A Decision-Making Expert System for the Oil Transport System”, SPE 69423, paper presented at the SPE Latin American Conference, Buenos Aires, March.

711. Paez, J.E., Blok, R., Vaziri, H., and Islam, M.R., 2001, Problems in Gas Hydrates: Practical

Guidelines for Field Remediation, SPE 69424, paper presented at the SPE Latin American Conference, Buenos Aires, March.

712. Solimany nazar, A.R., Dabir, B. and Islam, M.R., “Measurement and Modeling of Wax

Deposition in Crude Oil Pipelines”, SPE 69425, paper presented at the SPE Latin American Conference, Buenos Aires, March.

713. Islam, M.R., 2001, “Emerging Technologies in Subsurface Monitoring of Petroleum

Reservoirs”, SPE 69440, paper presented at the SPE Latin American Conference, Buenos Aires, March.

714. Saghir, M.Z., Edali, M.A., Islam, M.R., “Rigorous Modeling of Fractures in a Porous

Medium”, SPE 69574 , paper presented at the SPE Latin American Conference, Buenos Aires, March.

715. Wellington, S.L., and Islam, M.R., 2001, “Past, Present, and Future Trends in the Petroleum

Industry”, SPE 69611, paper presented at the SPE Latin American Conference, Buenos Aires, March.

716. Ghanei, M., Edalat, M., Vaziri, H., and Islam, M.R., 2001, “The Nonregular Solubility

Parameter Term for Predicting Onset and Amount of Asphaltene Precipitation” , SPE 69622, paper presented at the SPE Latin American Conference, Buenos Aires, March.

717. Numerical Evaluation of Hydraulic Fracturing Experiments, CSChE Annual Conference,

Halifax, Oct. 2001.

718. Bioremediation of Arsenic Contaminated Water, CSChE Annual Conference, Halifax, Oct. 2001.

719. Biological Methods for Mitigating Hydrate Problems, CSChE Annual Conference, Halifax,

Oct. 2001.

59

720. Protection of Mild Steel Against Corrosion Using Mixed Inhibitor Combination, CSChE

Annual Conference, Halifax, Oct. 2001.

721. Education of Petroleum Engineers: A New Program for a New Era, CSChE Annual Conference, Halifax, Oct. 2001.

722. Comprehensive Modeling of a JET Absorber, Era, CSChE Annual Conference, Halifax,

Oct. 2001.

723. Coating Performance Under Marine Environment, Era, CSChE Annual Conference, Halifax, Oct. 2001.

724. Prevention of Microbial Corrosion Using Coatings with Natural Additives, Era, CSChE


725. Prevention of Microbiologically Influenced Corrosion using Coatings, Era, CSChE Annual Conference, Halifax, Oct. 2001.

726. Phytoremediation - A Safer Approach for Arsenic Removal, Era, CSChE Annual

Conference, Halifax, Oct. 2001.

727. Development of Cost Effective Process that Enhances Removal of Arsenic from Surface and Ground Water in Nova Scotia, Era, CSChE Annual Conference, Halifax, Oct. 01.

728. Numerical Modeling of Wax Deposition during Turbulent Flow, Era, CSChE Annual Conference, Halifax, Oct. 2001.

729. A Predictive Thermodynamic Model of Wax Precipitation in Heavy Hydrocarbon Mixtures,

Era, CSChE Annual Conference, Halifax, Oct. 2001.

730. The Application of Continuous Three-dimensional Solubility Parameter, Era, CSChE Annual Conference, Halifax, Oct. 2001.

731. Distribution for Modeling Asphaltenes Phase Behavior in Crude Oils, Era, CSChE Annual

Conference, Halifax, Oct. 2001.

732. Use Of Offshore Drilling Waste In Hot Mix Asphalt (HMA) Concrete As, Era, CSChE Annual Conference, Halifax, Oct. 2001.

733. Aggregate Replacement Bituminous Stabilization/Solidification With Lime And Fly Ash Of

Offshore, Era, CSChE Annual Conference, Halifax, Oct. 2001.

734. Drilling Waste For Use As Road Base Materials, Era, CSChE Annual Conference, Halifax, Oct. 2001.

735. Bioremediation of 2,4,6-Trinitrotoluene (TNT) Wastes Using Aerobic Process, Era, CSChE

60


736. A Critical Review of Materials Available for Health Monitoring and Control of Offshore Structures, Era, CSChE Annual Conference, Halifax, Oct. 2001.

737. A novel Method for Remediation of Heavy Metal Contamination, Era, CSChE Annual Conference, Halifax, Oct. 2001.

738. Guidelines For Offshore Structure Monitoring, Era, CSChE Annual Conference, Halifax,

Oct. 2001.

739. Transient convection of Te doped GaSb induced by g-jitter at the ampoule boundary, Era, CSChE Annual Conference, Halifax, Oct. 2001.

740. Al-Darbi, M. and Islam, M.R., CSChE Conference, Vancouver, 2002.

741. Al-Darbi, M., Saeed, N.O. and Islam, M.R., CSChE Conference, Vancouver, 2002.

742. Al-Darbi, M., Agha, K.R., and Islam, M.R., CSChE Conference, Calgary, 2004.

743. Belhaj, H. et al., OTANS CIM Conference, Halifax, 2002.

744. Agha, K.R. et al., OTANS CIM Conference, Halifax, 2002.

745. Al-Darbi et al., OTANS CIM Conference, Halifax, 2002.

746. Paez et al., OTANS CIM Conference, Halifax, 2001.

747. Al-Darbi et al., OTANS CIM Conference, Halifax, 2001.

748. Islam, M.R., OTANS CIM Conference, Halifax, 2000.

749. Muntasser et al., OTANS CIM Conference, Halifax, 2000.

750. Islam, M.R., A. Chakma, and Nandakumar, CSChE Conference, Edmonton, 1988.

751. Islam, M.R. and Farouq Ali, CSChE Conference, Edmonton, 1988.

Books and Monographs - Prof. M. Rafiqul...

Documents

Transcript of Books and Monographs - Prof. M. Rafiqul...